Biphasic calcium phosphate ceramics for bone reconstruction: A review of biological response

Study of biphasic calcium phosphate (BCP) ceramics of tilapia fish bones by age

Biphasic calcium phosphate (BCP), consisting of bioceramics such as HAp + β-TCP and Ca10(PO4)6(OH)2 + Ca3(PO4)2, is a popular choice for optimizing performance due to its superior biological reabsorption and osseointegration. In this study, BCP was produced by calcining the bones of tilapia fish (Oreochromis niloticus) reared in net cages and slaughtered at an age ranging from 15 to 420 days. The bones were cleaned and dried, calcined at 900 °C for 8 h, and then subjected to high-energy grinding for 3 h to produce BCP powders. After the calcination process, the crystalline phase's hydroxyapatite (HAp) and/or beta-tricalcium phosphate (β-TCP) were present in the composition of the bioceramic. The age-dependent variation in phase composition was confirmed by complementary vibrational spectroscopy techniques, revealing characteristic peaks and bands of the bioceramic. This variation was marked by an increase in HAp phase and a decrease in β-TCP phase. Thermogravimetric Analysis (TGA) and Differential Thermal Analysis (DTA) from 25 to 1400 °C showed the characteristic mass losses of the material, with a greater loss observed for younger fish, indicating the complete removal of organic components at temperatures above 600 °C. Comparison of the results obtained by X-Ray Diffraction (XRD) and Rietveld refinement with Raman spectroscopy showed excellent agreement. These results showed that with temperature and environment control and adequate fish feeding, it is possible to achieve the desired amounts of each phase by choosing the ideal age of the fish. This bioceramic enables precise measurement of HAp and β-TCP concentrations and Ca/P molar ratio, suitable for medical orthopedics and dentistry.

Bovine hydroxyapatite/3Y-TZP bioceramic: Aligning 3Y-TZP content with sintering parameters

This study aimed to produces and characterize bovine hydroxyapatite (HA) bioceramic with 3Y-TZP addition and analyze different sintering curves. HA was extracted from bovine bones and nanoparticulated. HA discs (0, 1, 5 and 10 wt% 3Y-TZP) were subjected to uniaxial and isostatic pressing. Dilatometry analysis was performed and the groups were sintered using 3 different firing curves (conventional, 1300 °C; 2-step, 1292 °C; 2-step, 1420 °C). The samples were analyzed by X-ray diffraction (XRD), biaxial flexural strength (BFS), Vickers microhardness (VH) and Field emission scanning electron microscopy (FE-SEM). The dilatometry results signaled the need for sintering optimization in groups added with 3Y-TZP. XRD demonstrated the characteristic crystallographic peaks of HA in the pure groups and with 1% 3Y-TZP, and decomposition of HA into β-TCP and formation of calcium zirconate in the groups with 5 and 10% 3Y-TZP. Considering each composition, the groups of pure HA (131.3 ± 13.5 MPa; 401 ± 12.7 GPa) sintered by the conventional curve and HA+1%3Y-TZP (145 ± 8.6 MPa; 507 ± 47.9 GPa), HA+5%3Y-TZP (68.1 ± 14.2 MPa; 183 ± 9.8 GPa) and HA+10%3Y-TZP (55.6 ± 5.1 MPa; 96.1 ± 7.64 GPa) sintered by the 2-step curve at 1420 °C, combined the best BFS and VH results. The addition of 1 wt% 3Y-TZP and optimization in the sintering process improved the mechanical and microstructural properties of HA bioceramics and maintenance of its crystalline characteristics. Refinement in material processing is necessary for the future use of this bioceramic in dentistry.

PI3K/AKT/mTOR signaling regulates BCP ceramic-induced osteogenesis

An increasing number of studies demonstrate that biphasic calcium phosphate (BCP) ceramics can induce bone regeneration. However, the underlying molecular mechanisms involved are still poorly understood. This work was proposed to investigate how PI3K/AKT/mTOR signaling influenced the osteogenesis mediated by BCP ceramics. The results showed that incubation with BCP ceramics promoted the proliferation of murine bone marrow-derived mesenchymal stem cells (BMSCs) in a time-dependent manner. The resulting cell proliferation was then suppressed by the selective inhibition of either PI3K, AKT, or mTOR signaling activation. Next, we confirmed that BCP ceramics up-regulated the phosphorylation levels of AKT and mTOR in BMSCs, suggesting the ability of BCP ceramics to drive the activation of PI3K/AKT/mTOR signaling in BMSCs. Furthermore, the blockade of PI3K/AKT/mTOR signaling prevented BCP ceramics-induced osteogenic differentiation and pro-angiogenesis of BMSCs by down-regulating the expression of genes encoding OPN, RUNX2 or VEGF. Moreover, the PI3K/AKT/mTOR signaling blockade suppressed stem cell infiltration and new bone formation in the implants following intra-muscular implantation of BCP ceramics in mice. Therefore, our results suggested that PI3K/AKT/mTOR signaling played a critical regulatory role in BCP ceramic-induced osteogenesis.

An Injectable Hydrogel Composing Anti-Inflammatory and Osteogenic Therapy toward Bone Erosions Microenvironment Remodeling in Rheumatoid Arthritis

Healing bone erosions in rheumatoid arthritis (RA) remains greatly challenging via biomaterial strategies. Given the unsuccessful innate bone erosion healing due to an inflammatory disorder, over-activated osteoclasts, and impaired osteoblasts differentiation, RA pathogenesis-guided engineering of an innovative hydrogel platform is needed for remodeling osteoimmune and osteogenic microenvironment of bone erosion healing. Herein, in situ adaptable and injectable interpenetrating polymer network (IPN) hydrogel is developed through an ingenious combination of a bio-orthogonal reaction between hyaluronic acid (HA) and collagen, along with effective electrostatic interactions leveraging bisphosphonate (BP)-functionalized HA macromers (HABP) and nanorod shaped zinc (Zn)-doped biphasic calcium phosphate (ZnBCP). IPN hydrogel exhibits exceptional adaptability to the local shape complexity at bone erosions, and by integrating ZnBCP and HABP, a multi-stage releasing platform is engineered, facilitating controlled cargo delivery for remodeling more anti-inflammatory M2 cells and reducing over-activated osteoclastic activities, thereby reconstructing the bone regeneration microenvironment. Sustainedly co-delivering multiple ions (calcium and phosphate) can display excellent osteogenic properties and be conducive to the bone formation process, by effects of osteogenesis-associated cell differentiation. Overall, the introduced bioactive IPN hydrogel therapy remodels the osteoimmune environment by synergistic pro-inflammation-resolving, osteogenesis, and anti-osteoclastic activities, displaying excellent bone reconstruction in the collagen-induced arthritis rabbit model.

Cellular Scale Curvature in Bioceramic Scaffolds Enhanced Bone Regeneration by Regulating Skeletal Stem Cells and Vascularization

Critical-sized segmental bone defects cannot heal spontaneously, leading to disability and significant increase in mortality. However, current treatments utilizing bone grafts face a variety of challenges from donor availability to poor osseointegration. Drugs such as growth factors increase cancer risk and are very costly. Here, a porous bioceramic scaffold that promotes bone regeneration via solely mechanobiological design is reported. Two types of scaffolds with high versus low pore curvatures are created using high-precision 3D printing technology to fabricate pore curvatures radius in the 100s of micrometers. While both are able to support bone formation, the high-curvature pores induce higher ectopic bone formation and increased vessel invasion. Scaffolds with high-curvature pores also promote faster regeneration of critical-sized segmental bone defects by activating mechanosensitive pathways. High-curvature pore recruits skeletal stem cells and type H vessels from both the periosteum and the marrow during the early phase of repair. High-curvature pores have increased survival of transplanted GFP-labeled skeletal stem cells (SSCs) and recruit more host SSCs. Taken together, the bioceramic scaffolds with defined micrometer-scale pore curvatures demonstrate a mechanobiological approach for orthopedic scaffold design.

Copper-based carbon dots modified hydrogel with osteoimmunomodulatory and osteogenesis for bone regeneration

Biomaterials with dual functions of osteoimmunomodulation and bone repair are very promising in the field of orthopedic materials. For this purpose, we prepared copper-based carbon dots (CuCDs) and doped them into oxychondroitin sulfate/poly-acrylamide hydrogel (OPAM) to obtain a hybrid hydrogel (CuCDs/OPAM). We evaluated its osteoimmunomodulatory and bone repair properties in vitro and in vivo. The obtained CuCDs/OPAM exhibited good rBMSCs-cytocompatibility and anti-inflammatory properties in vitro. It also could effectively promote rBMSCs differentiation and the expression of osteogenic differentiation factors from rBMSCs under an inflammatory environment. Moreover, CuCDs/OPAM could induce macrophage phenotype switching (from M1-type macrophages to M2-type macrophages) in vivo, which is beneficial for anti-inflammatory action and presents good osteoimmunomodulation capability to induce a bone immune microenvironment to promote the differentiation of rBMSCs. In conclusion, CuCDs/OPAM hydrogel has dual functions of osteoimmunomodulatory and bone repair and is a promising bone filling and repair material.

A model approach to show that monocytes can enter microporous β-TCP ceramics

β-TCP ceramics are versatile bone substitute materials and show many interactions with cells of the monocyte-macrophage-lineage. The possibility of monocytes entering microporous β-TCP ceramics has however not yet been researched. In this study, we used a model approach to investigate whether monocytes might enter β-TCP, providing a possible explanation for the origin of CD68-positive osteoclast-like giant cells found in earlier works.We used flow chambers to unidirectionally load BC, PRP, or PPP into slice models of either 2 mm or 6 mm β-TCP. Immunofluorescence for CD68 and live/dead staining was performed after the loading process.Our results show that monocytes were present in a relevant number of PRP and BC slices representing the inside of our 2 mm slice model and also present on the actual inside of our 6 mm model. For PPP, monocytes were not found beyond the surface in either model.Our results indicate the possibility of a new and so far neglected constituent in β-TCP degradation, perhaps causing the process of ceramic degradation also starting from inside the ceramics as opposed to the current understanding. We also demonstrated flow chambers as a possible new in vitro model for interactions between blood and β-TCP.

Characterization of Porous β-Type Tricalcium Phosphate Ceramics Formed via Physical Foaming with Freeze-Drying

Porous β-tricalcium phosphate (Ca3(PO4)2; β-TCP) was prepared via freeze-drying and the effects of this process on pore shapes and sizes were investigated. Various samples were prepared by freezing β-TCP slurries above a liquid nitrogen surface at -180 °C with subsequent immersion in liquid nitrogen at -196 °C. These materials were then dried under reduced pressure in a freeze-dryer, after which they were sintered with heating. Compared with conventional heat-based drying, the resulting pores were more spherical, which increased both the mechanical strength and porosity of the β-TCP. These materials had a wide range of pore sizes from 50 to 200 µm, with the mean and median values both approximately 100 µm regardless of the freeze-drying conditions. Mercury porosimetry data showed that the samples contained small, interconnected pores with sizes of 1.24 ± 0.25 µm and macroscopic, interconnected pores of 25.8 ± 4.7 µm in size. The effects of nonionic surfactants having different hydrophilic/lipophilic balance (HLB) values on foaming and pore size were also investigated. Materials made with surfactants having lower HLB values exhibited smaller pores and lower porosity, whereas higher HLB surfactants gave higher porosity and slightly larger macropores. Even so, the pore diameter could not be readily controlled solely by adjusting the HLB value. The findings of this work indicated that high porosity (>75%) and good compressive strength (>2 MPa) can both be obtained in the same porous material and that foaming agents with HLB values between 12.0 and 13.5 were optimal.

Pilot Clinical Trial to Evaluate In Situ Calcium Phosphate Cement Injection for Conservative Surgical Management of Appendicular Osteosarcoma in Dogs

Cementoplasty is a minimally invasive procedure that consists of injecting a bone substitute into the tumor lesion to provide bone reinforcement and alleviate pain. This study aimed to demonstrate the feasibility, safety, and efficacy of cementoplasty with a calcium phosphate cement in osteosarcoma to reduce pain and preserve limb function. Throughout the 6-month study, dogs received no adjuvant therapy, and dogs' evaluations included a clinical examination, monitoring of postoperative complications, radiographic follow-up, and assessment of limb function and pain scores. Out of 12 dogs enrolled, 10 were withdrawn before study completion due to deterioration in their general condition. Nine (9) dogs were followed until D28, six until D56, and two until D183. Compared to D0, more than 50% of the dogs showed improvement in both veterinarian and owner scores at their final visit. Throughout the study, 10 major and 4 minor complications were reported, all unrelated to the procedure. This open non-controlled study provides first evidence of the feasibility, safety, and efficacy of cementoplasty procedure using a calcium phosphate bone cement to relieve pain and preserve limb function in dogs suffering from appendicular osteosarcoma.

Combination of a Synthetic Bioceramic Associated with a Polydioxanone-Based Membrane as an Alternative to Autogenous Bone Grafting

The purpose of this study was to evaluate the repair process in rat calvaria filled with synthetic biphasic bioceramics (Plenum® Osshp-70:30, HA:βTCP) or autogenous bone, covered with a polydioxanone membrane (PDO). A total of 48 rats were divided into two groups (n = 24): particulate autogenous bone + Plenum® Guide (AUTOPT+PG) or Plenum® Osshp + Plenum® Guide (PO+PG). A defect was created in the calvaria, filled with the grafts, and covered with a PDO membrane, and euthanasia took place at 7, 30, and 60 days. Micro-CT showed no statistical difference between the groups, but there was an increase in bone volume (56.26%), the number of trabeculae (2.76 mm), and intersection surface (26.76 mm2) and a decrease in total porosity (43.79%) in the PO+PG group, as well as higher values for the daily mineral apposition rate (7.16 µm/day). Histometric analysis presented material replacement and increased bone formation at 30 days compared to 7 days in both groups. Immunostaining showed a similar pattern between the groups, with an increase in proteins related to bone remodeling and formation. In conclusion, Plenum® Osshp + Plenum® Guide showed similar and sometimes superior results when compared to autogenous bone, making it a competent option as a bone substitute.

3D printing technology and its combination with nanotechnology in bone tissue engineering

With the graying of the world's population, the morbidity of age-related chronic degenerative bone diseases, such as osteoporosis and osteoarthritis, is increasing yearly, leading to an increased risk of bone defects, while current treatment methods face many problems, such as shortage of grafts and an incomplete repair. Therefore, bone tissue engineering offers an alternative solution for regenerating and repairing bone tissues by constructing bioactive scaffolds with porous structures that provide mechanical support to damaged bone tissue while promoting angiogenesis and cell adhesion, proliferation, and activity. 3D printing technology has become the primary scaffold manufacturing method due to its ability to precisely control the internal pore structure and complex spatial shape of bone scaffolds. In contrast, the fast development of nanotechnology has provided more possibilities for the internal structure and biological function of scaffolds. This review focuses on the application of 3D printing technology in bone tissue engineering and nanotechnology in the field of bone tissue regeneration and repair, and explores the prospects for the integration of the two technologies.

Biphasic Calcium Phosphate and Activated Carbon Microparticles in a Plasma Clot for Bone Reconstruction and In Situ Drug Delivery: A Feasibility Study

The development of bone-filling biomaterials capable of delivering in situ bone growth promoters or therapeutic agents is a key area of research. We previously developed a biomaterial constituting biphasic calcium phosphate (BCP) microparticles embedded in an autologous blood or plasma clot, which induced bone-like tissue formation in ectopic sites and mature bone formation in orthotopic sites, in small and large animals. More recently, we showed that activated carbon (AC) fiber cloth is a biocompatible material that can be used, due to its multiscale porosity, as therapeutic drug delivery system. The present work aimed first to assess the feasibility of preparing calibrated AC microparticles, and second to investigate the properties of a BCP/AC microparticle combination embedded in a plasma clot. We show here, for the first time, after subcutaneous (SC) implantation in mice, that the addition of AC microparticles to a BCP/plasma clot does not impair bone-like tissue formation and has a beneficial effect on the vascularization of the newly formed tissue. Our results also confirm, in this SC model, the ability of AC in particle form to adsorb and deliver large molecules at an implantation site. Altogether, these results demonstrate the feasibility of using this BCP/AC/plasma clot composite for bone reconstruction and drug delivery.

Gene expression, micro-CT and histomorphometrical analysis of sinus floor augmentation with biphasic calcium phosphate and deproteinized bovine bone mineral: A randomized controlled clinical trial

AIMS

The aim of this randomized controlled clinical trial was to compare the gene expression, micro-CT, histomorphometrical analysis between biphasic calcium phosphate (BCP) of 70/30 ratio and deproteinized bovine bone mineral (DBBM) in sinus augmentation.

MATERIALS AND METHODS

Twenty-four patients in need for sinus floor augmentation through lateral approach were randomized into BCP 70/30 ratio or DBBM. After at least 6 months of healing, a total of 24 bone specimens were collected from the entire height of the augmented bone at the area of implant placement and underwent micro-CT, histomorphometric and gene expression analysis. The 12 bone specimens of BCP 70/30 ratio were equally allocated to micro-CT and histologic analysis (test group, n = 6) and gene expression analysis (test group, n = 6). Similarly, the 12 bone specimens of DBBM were also allocated to micro-CT and histologic analysis (control group, n = 6) and gene expression analysis (control group, n = 6). The newly formed bone, remaining graft materials and relative change in gene expression of four target genes were assessed.

RESULTS

The micro-CT results showed no statistically significant difference in the ratio of bone volume to total volume (BV/TV ratio) for the two groups (BCP 41.51% vs. DBBM 40.97%) and the same was true for residual graft material to total volume (GV/TV ratio, BCP 9.97% vs. DBBM 14.41%). Similarly, no significant difference was shown in the histological analysis in terms of bone formation, (BCP 31.43% vs. DBBM was 30.09%) and residual graft area (DBBM 40.76% vs. BCP 45.06%). With regards to gene expression, the level of ALP was lower in both groups of bone grafted specimens compared with the native bone. On the contrary, the level of OSX, IL-1B and TRAP was higher in augmented bone of both groups compared with the native bone. However, the relative difference in all gene expressions between BCP and DBBM group was not significant.

CONCLUSIONS

The BCP, HA/β-TCP ratio of 70/30 presented similar histological and micro-CT outcomes in terms of new bone formation and residual graft particles with DBBM. The gene expression analysis revealed different gene expression patterns between augmented and native bone, but showed no significant difference between the two biomaterials.

In Situ Photo-Crosslinkable Protein Bioadhesive for Bone Graft Fixation

Bone grafting is a fundamental dental surgery procedure widely used for implant placement and periodontal disease management treatments. Despite its broad applications, vertical bone augmentation presents unique challenges, including the risk of graft displacement due to gravitational and masticatory forces. Traditional physical stabilization methods introduce additional complexities and risks, underscoring the need for innovative fixation technologies. This study aimed to develop an in situ photo-crosslinkable bioadhesive hydrogel (iPBAH) as a multifunctional bone graft binder to enhance the process of bone reconstruction. The bioadhesive is composed of mussel-derived adhesive protein (MAP) fused with the cell-adhesive peptide RGD. The numerous tyrosine residues in MAP facilitate rapid photo-crosslinking, enabling efficient hydrogel formation using visible blue light. Subsequently, iPBAH underwent comprehensive characterization to evaluate its suitability as a multifunctional bone graft binder. iPBAH efficiently underwent in situ crosslinking through harmless exposure to visible light within minutes and displayed several exceptional properties, including a microporous structure, underwater adhesion, extended durability, high compressive strength, and biocompatibility. In vivo assessments, using male Sprague-Dawley rats, demonstrated that iPBAH binder significantly enhanced bone regeneration in a rat calvarial bone defect model. The in situ crosslinking of the iPBAH binder during bone graft transplantation can effectively fill irregular and complex defect shapes while simultaneously preventing graft material leakage. The improved physical attributes of the bound graft material can enhance its resistance to external forces, thereby ensuring sustained retention over time. Moreover, the interaction between iPBAH and surrounding tissues promotes adhesion and integration of the graft material with host tissues in the defect area. In addition, the included RGD peptide in iPBAH can augment inherent cell recruitment, adhesion, and growth, consequently expediting osteogenesis.

Triple-Hybrid BioScaffold Based on Silk Fibroin, Chitosan, and nano-Biphasic Calcium Phosphates: Preparation, Characterization of Physiochemical and Biopharmaceutical Properties

Bioscaffolds, which promote cell regeneration and restore tissues' functions, have emerged as significant need in clinic. The hybrid of several biomaterials in a bioscaffold renders clinically advanced and relevant properties for applications yet add challenges in cost efficiency, production, and clinical investigation. This study proposes a facile and sustainable method to formulate a triple-hybrid bioscaffold based on Vietnamese cocoon origin Silk Fibroin, Chitosan, and nano-Biphasic Calcium Phosphates (nano-BCP) that can be easily molded, has high porosity (55-80%), and swelling capacity that facilitates cell proliferation and nutrient diffusion. Notably, their mechanical properties, in particular compressive strength, can easily be tuned in a range from 50 - 200 kPa by changing the amount of nano-BCP addition, which is comparable to the successful precedents for productive cell regeneration. The latter parts investigate the biopharmaceutical properties of a representative bioscaffold, including drug loading and release studies with two kinds of active compounds, salmon calcitonin and methylprednisolone. Furthermore, the bioscaffold is highly biocompatible as the results of hemocompatibility and hemostasis tests, as well as ovo chick chorioallantoic membrane investigation. The findings of the study suggest the triple-hybrid scaffold as a promising platform for multi-functional drug delivery and bone defect repair.

Application of Bioactive Materials for Osteogenic Function in Bone Tissue Engineering

Bone tissue defects present a major challenge in orthopedic surgery. Bone tissue engineering using multiple versatile bioactive materials is a potential strategy for bone-defect repair and regeneration. Due to their unique physicochemical and mechanical properties, biofunctional materials can enhance cellular adhesion, proliferation, and osteogenic differentiation, thereby supporting and stimulating the formation of new bone tissue. 3D bioprinting and physical stimuli-responsive strategies have been employed in various studies on bone regeneration for the fabrication of desired multifunctional biomaterials with integrated bone tissue repair and regeneration properties. In this review, biomaterials applied to bone tissue engineering, emerging 3D bioprinting techniques, and physical stimuli-responsive strategies for the rational manufacturing of novel biomaterials with bone therapeutic and regenerative functions are summarized. Furthermore, the impact of biomaterials on the osteogenic differentiation of stem cells and the potential pathways associated with biomaterial-induced osteogenesis are discussed.

Effects of void defects on the mechanical properties of biphasic calcium phosphate nanoparticles: A molecular dynamics investigation

Porous biphasic calcium phosphate (BCP) ceramics are widely used in bone tissue engineering, and the mechanical properties of BCP implants must be reliable. However, the effects of pore structure (e.g., shape and size) on the mechanical properties are not well understood. In this study, we used molecular dynamics simulations to investigate the influence of pore shape and size on the mechanical behavior of BCP nanoparticles. BCP void models with cylindrical and cuboid pores ranging from 2 to 16 nm in diameter were constructed, and the elastic moduli were calculated. In addition, uniaxial tensile and compressive tests were performed on the models. We found that the pore size had a more significant impact on the mechanical properties of BCP than pore shape. Further, the elastic moduli decreased nonlinearly with increasing pore size. In addition, the tensile and compressive strength also decreased with the increase in pore size, but the ductility improved. Furthermore, deformation and fracture were more likely to occur near the pores and at the phase interfaces as a result of high atomic local strain in the calcium-deficient hydroxyapatite area. The results of this work reveal the effects of pore parameters on the mechanical properties of porous BCP at the nanometer level, which may aid the design of improved porous and multiphase CaP-based biomaterials for bone regeneration.

Evaluation of Time-Dependent Corrosion Inhibition Rate for f-MWCNT-BCP Composite Coatings on 316L Stainless Steel in Simulated Body Fluid for Orthopedic Implantation

A well-developed-multiwall carbon nanotube (f-MWCNT)/biphasic calcium phosphate (BCP) composites were synthesized using ultrasonication method for orthopedic implantation applications. The formation of composites and its phase was confirmed by using X-ray diffraction. The presence of various functional groups was identified by using Fourier transform infra-red (FT-IR) spectroscopy. The presence of f-MWCNT was confirmed by Raman spectroscopy. High-resolution transmission electron microscopy (HR-TEM) analysis revealed that BCP units were bound by the surface of f-MWCNTs. The synthesized composites were coated on medical grade 316L stainless steel substrates using electro deposition technique. To determine its corrosion resistance characteristics, the developed substrates were exposed to a simulated bodily fluid (SBF) solution for 0, 4, and 7 days. These results strongly suggest that the coated composites can be utilized for bone tissue repair.

Biological Properties and Medical Applications of Carbonate Apatite: A Systematic Review

Bone defects represent an everyday challenge for clinicians who work in the fields of orthopedic surgery, maxillofacial and oral surgery, otorhinolaryngology, and dental implantology. Various bone substitutes have been developed and utilized, according to the needs of bone reconstructive surgery. Carbonate apatite has gained popularity in recent years, due to its excellent tissue behavior and osteoconductive potential. This systematic review aims to evaluate the role of carbonate apatite in bone reconstructive surgery and tissue engineering, analyze its advantages and limitations, and suggest further directions for research and development. The Web of Science, PubMed, and Scopus electronic databases were searched for relevant review articles, published from January 2014 to 21 July 2023. The study was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Eighteen studies were included in the present review. The biological properties and medical applications of carbonate apatite (CO3Ap) are discussed and evaluated. The majority of articles demonstrated that CO3Ap has excellent biocompatibility, resorbability, and osteoconductivity. Furthermore, it resembles bone tissue and causes minimal immunological reactions. Therefore, it may be successfully utilized in various medical applications, such as bone substitution, scaffolding, implant coating, drug delivery, and tissue engineering.

Preclinical evaluation of a new synthetic carbonate apatite bone substitute on periodontal regeneration in intrabony defects

OBJECTIVE

To evaluate the potential of a novel synthetic carbonate apatite bone substitute (CO3 Ap-BS) on periodontal regeneration.

BACKGROUND

The use of various synthetic bone substitutes as a monotherapy for periodontal regeneration mainly results in a reparative healing pattern. Since xenografts or allografts are not always accepted by patients for various reasons, a synthetic alternative would be desirable.

METHODS

Acute-type 3-wall intrabony defects were surgically created in 4 female beagle dogs. Defects were randomly allocated and filled with CO3 Ap-BS (test) and deproteinized bovine bone mineral (DBBM) or left empty (control). After 8 weeks, the retrieved specimens were scanned by micro-CT, and the percentages of new bone, bone substitute, and soft tissues were evaluated. Thereafter, the tissues were histologically and histometrically analyzed.

RESULTS

Healing was uneventful in all animals, and defects were present without any signs of adverse events. Formation of periodontal ligament and cementum occurred to varying extent in all groups without statistically significant differences between the groups. Residues of both bone substitutes were still present and showed integration into new bone. Histometry and micro-CT revealed that the total mineralized area or volume was higher with the use of CO3 Ap-BS compared to control (66.06 ± 9.34%, 36.11 ± 6.40%; p = .014, or 69.74 ± 2.95%, 42.68 ± 8.68%; p = .014). The percentage of bone substitute surface covered by new bone was higher for CO3 Ap-BS (47.22 ± 3.96%) than for DBBM (16.69 ± 5.66, p = .114).

CONCLUSIONS

CO3 Ap-BS and DBBM demonstrated similar effects on periodontal regeneration. However, away from the root surface, more new bone, total mineralized area/volume, and higher osteoconductivity were observed for the CO3 Ap-BS group compared to the DBBM group. These findings point to the potential of CO3 Ap-BS for periodontal and bone regeneration.

Wnt10b regulates osteogenesis of adipose-derived stem cells through Wnt/β-catenin signalling pathway in osteoporosis

Our previous finding revealed that the Wnt10b RNA expression of osteoporotic adipose-derived stem cells (OP-ASCs) with impaired osteogenic capacity was significantly reduced than that of ASCs. There are no ideas that the relationship between the OP-ASCs' impaired osteogenic potential and Wnt10b expression. This study aimed to indicate the potential molecular mechanisms and functional role of Wnt10b in OP-ASCs, as well as to investigate a potential application to reverse the OP-ASCs' impaired osteogenic differentiation potential. The OP-ASCs and ASCs were harvested from the inguinal fat of osteoporosis (OP) mice with bilateral ovariectomy (OVX) and normal mice. qPCR and WB were used to detect the different levels of the expression of the Wnt10b RNA in both OP-ASCs and ASCs. Lentiviral-mediated regulation of Wnt10b expression was employed for OP-ASCs, and the detection of the expression levels of key molecules in the Wnt signalling pathway and key osteogenic factors was performed through qPCR and WB in vitro experiments. The capacity of OP-ASCs to osteogenesis was determined using alizarin red staining. Lastly, the repair effect of the BCP scaffolds incorporating modified OP-ASCs on the critical-sized calvarial defects (CSCDs) in OP mice was scanned and detected by micro-computed tomography, haematoxylin and eosin staining, Masson's trichrome staining and immunohistochemistry. First, we discovered that both the RNA and protein expression levels of Wnt10b were significantly lower in OP-ASCs than that in ASCs. In vitro experiments, upregulation of Wnt10b could activate the Wnt signalling pathway, and increase expression of β-catenin, Lef1, Runx2 and osteopontin (Opn), thereby enhancing the osteogenic ability of OP-ASCs. In addition, the OP-ASCs with Wnt10b-overexpressing could promote the repair of CSCD in osteoporotic mice with increasing new bone volume, bone mineral density, and increased expression of Opn in new bone in vivo. Taken together, overexpression of Wnt10b could partially facilitate the differentiation of OP-ASCs towards osteogenesis and accelerated the healing of bone defects by activating the Wnt/β-catenin signalling pathway in vitro and in vivo experiments. This study confirmed the important role of Wnt10b in regulating the osteogenic differentiation capability of OP-ASCs and indicated Wnt10b could be a potential therapeutic target for reversing the impaired osteogenic capabilities of OP-ASCs to therapy bone defects of OP patients.

Viability of Collagen Matrix Grafts Associated with Nanohydroxyapatite and Elastin in Bone Repair in the Experimental Condition of Ovariectomy

Bone lesions have the capacity for regeneration under normal conditions of the bone metabolism process. However, due to the increasing incidence of major traumas and diseases that cause bone-mineral deficiency, such as osteoporosis, scaffolds are needed that can assist in the bone regeneration process. Currently, natural polymeric scaffolds and bioactive nanoparticles stand out. Therefore, the objective of the study was to evaluate the osteoregenerative potential in tibiae of healthy and ovariectomized rats using mineralized collagen and nanohydroxyapatite (nHA) scaffolds associated with elastin. The in-vivo experimental study was performed with 60 20-week-old Wistar rats, distributed into non-ovariectomized (NO) and ovariectomized (O) groups, as follows: Controls (G1-NO-C and G4-O-C); Collagen with nHA scaffold (G2-NO-MSH and G5-O-MSH); and Collagen with nHA and elastin scaffold (G3-NO-MSHC and G6-O-MSHC). The animals were euthanized 6 weeks after surgery and the samples were analyzed by macroscopy, radiology, and histomorphometry. ANOVA and Tukey tests were performed with a 95% CI and a significance index of p < 0.05. In the histological analyses, it was possible to observe new bone formed with an organized and compact morphology that was rich in osteocytes and with maturity characteristics. This is compatible with osteoconductivity in both matrices (MSH and MSHC) in rats with normal conditions of bone metabolism and with gonadal deficiency. Furthermore, they demonstrated superior osteogenic potential when compared to control groups. There was no significant difference in the rate of new bone formation between the scaffolds. Ovariectomy did not exacerbate the immune response but negatively influenced the bone-defect repair process.

Design and fabrication of biomimicking radially graded scaffolds via digital light processing 3D printing for bone regeneration

Scaffolds are an essential component in bone tissue engineering (BTE). However, most of the current BTE scaffolds are homogeneous structures and do not resemble the graded architectures of native bone. In the current study, four types of biomimicking scaffold designs based on gyroid (G) and primitive (P) units with radially graded pore sizes were devised, and scaffolds of these designs with two porosity groups (65 vol% and 75 vol%) were fabricated via digital light processing (DLP) 3D printing using biphasic calcium phosphate (BCP). Scaffolds of the gyroid-gyroid (G-G) design displayed better dimensional accuracy, compressive property, and cell proliferation rate than gyroid-primitive (G-P), primitive-gyroid (P-G), and primitive-primitive (P-P) scaffolds. Subsequently, graded G-G scaffolds with different porosities were fabricated and the relationship between compressive strength and porosity was determined. Furthermore, the sintered BCP bioceramics fabricated via current manufacturing process exhibited excellent biocompatibility and bioactivity, indicating their high potential for BTE.

Hydroxyapatite 3D-printed scaffolds with Gyroid-Triply periodic minimal surface porous structure: Fabrication and an in vivo pilot study in sheep

Bone repair is a major challenge in regenerative medicine, e.g. for large defects. There is a need for bioactive, highly percolating bone substitutes favoring bone ingrowth and tissue healing. Here, a modern 3D printing approach (VAT photopolymerization) was exploited to fabricate hydroxyapatite (HA) scaffolds with a Gyroid-"Triply periodic minimal surface" (TPMS) porous structure (65% porosity, 90.5% HA densification) inspired from trabecular bone. Percolation and absorption capacities were analyzed in gaseous and liquid conditions. Mechanical properties relevant to guided bone regeneration in non-load bearing sites, as for maxillofacial contour reconstruction, were evidenced from 3-point bending tests and macrospherical indentation. Scaffolds were implanted in a clinically-relevant large animal model (sheep femur), over 6 months, enabling thorough analyses at short (4 weeks) and long (26 weeks) time points. In vivo performances were systematically compared to the bovine bone-derived Bio-OssⓇ standard. The local tissue response was examined thoroughly by semi-quantitative histopathology. Results demonstrated the absence of toxicity. Bone healing was assessed by bone dynamics analysis through epifluorescence using various fluorochromes and quantitative histomorphometry. Performant bone regeneration was evidenced with similar overall performances to the control, although the Gyroid biomaterial slightly outperformed Bio-OssⓇ at early healing time in terms of osteointegration and appositional mineralization. This work is considered a pilot study on the in vivo evaluation of TPMS-based 3D porous scaffolds in a large animal model, for an extended period of time, and in comparison to a clinical standard. Our results confirm the relevance of such scaffolds for bone regeneration in view of clinical practice. STATEMENT OF SIGNIFICANCE: Bone repair, e.g. for large bone defects or patients with defective vascularization is still a major challenge. Highly percolating TPMS porous structures have recently emerged, but no in vivo data were reported on a large animal model of clinical relevance and comparing to an international standard. Here, we fabricated TPMS scaffolds of HA, determined their chemical, percolation and mechanical features, and ran an in-depth pilot study in the sheep with a systematic comparison to the Bio-OssⓇ reference. Our results clearly show the high bone-forming capability of such scaffolds, with outcomes even better than Bio-OssⓇ at short implantation time. This preclinical work provides quantitative data validating the relevance of such TMPS porous scaffolds for bone regeneration in view of clinical evaluation.

Regeneration of Buccal Wall Defects after Tooth Extraction with Biphasic Calcium Phosphate in Injectable Form vs. Bovine Xenograft: A Randomized Controlled Clinical Trial

Bone healing after tooth extraction may be affected by defects of the alveolus buccal wall, such as fenestrations and dehiscences. Therefore, to minimize dimensional changes it is advisable to perform alveolar ridge preservation after tooth extractions. Different biomaterials are used for this purpose. The aim of this study was to investigate the qualitative and quantitative histological changes in human biopsies taken after 6 months of healing of extraction sockets with buccal wall defects. For this purpose, the defects of 36 patients (18 per group) were treated with injectable biphasic calcium phosphate (I-BCP) or bovine xenograft (BX) after extraction. After six months of healing, biopsies were taken and proceeded to the histology laboratory. No evidence of an inflammatory response of the tissue was observed in the biopsies of either group, and the newly formed bone (NB) was in close contact with the remaining biomaterial (BM). The histomorphometric results showed that there was no statistically significant difference between the groups in the mean percentage of NB (p = 0.854), BM (p = 0.129), and soft tissue (p = 0.094). To conclude, both biomaterials exhibited osteoconductivity and biocompatibility and achieved satisfactory bone regeneration of buccal wall defects after tooth extraction.

Experimental study of a 3D-printing technique combined with biphasic calcium phosphates to treat osteonecrosis of the femoral head in a canine model

OBJECTIVE

This study was aimed to use a digital design of 3D-printing technology to create a surgical navigation template. At the same time, biphasic calcium phosphate (BCP) was applied to treat osteonecrosis of the femoral head (ONFH) in animal models, based on accurate positioning of necrotic lesions in the navigation templates and observation of its therapeutic effect.

METHODS

Fifteen healthy adult male and female beagle dogs weighing 20 + 2 kg were randomly divided into three groups (n = 5) after establishing a model of ONFH using the liquid nitrogen freezing method. Each model underwent necrotic lesion creation and BPC implantations on one side of the femoral head and only necrotic lesion creation on the other side of the femoral head. Each group underwent CT examination, gross observation, histological examination and immunohistochemical staining at 6 weeks, 12 weeks and 18 weeks postoperatively.

RESULTS

At weeks 6, 12, and 18, CT and gross examination showed that the necrotic area in the experimental group was basically intact and had been completely raised by BCP material. In the control group, there were signs of bone repair in the femoral head, but there were still large bone defects and cavities. At week 18, extensive collapse of the cartilage surface was observed. Through histological examination, in the experimental group at 12 and 18 weeks, a large number of new and reconstructed bone trabeculae containing a large amount of collagen fibres were observed (P < 0.05), while in the control group, there was extensive necrosis of the bone trabeculae without cellular structural areas. Immunohistochemical examination observation: A large number of CD31-positive cells were observed in the experimental group at 6 weeks, gradually decreasing at 12 and 18 weeks (P < 0.05), while a small number of CD31-positive cells were observed in the control group at 18 weeks.

CONCLUSION

The 3D-printed navigation template can accurately locate ONFH lesions. Implantation of BCP material can effectively play a supporting role, prevent the collapse of the loading surface, and induce bone formation and angiogenesis to some extent.

A biphasic calcium phosphate/acylated methacrylate gelatin composite hydrogel promotes osteogenesis and bone repair

PURPOSE/AIM

Bone defects caused by trauma, tumors, congenital malformation, or inflammation are very common in orthopedics. In recent years, mimicking the composition and structure of natural bone tissue has become a hot topic in biomaterial research, with the aim of developing an ideal biomaterial for bone defect transplantation. Here, the feasibility of a biphasic calcium phosphate (BCP)/acylated methacrylate gelatin (GelMA) composite hydrogel to repair bone defects was evaluated in vitro and in rats.

MATERIALS AND METHODS

The biocompatibility of a biphasic calcium phosphate (BCP)/acylated methacrylate gelatin (GelMA) composite hydrogel was evaluated by cytoskeleton staining, live/dead cell staining and cell proliferation assays. The in vitro osteogenic activities of the composite hydrogel were evaluated by alkaline phosphatase and alizarin red staining, as well as osteogenic gene expression analysis at both transcript and protein levels. The in vivo bone repair activities were evaluated using the rat skull defect model.

RESULTS

The BCP/GelMA composite hydrogel displayed excellent biocompatibility and promoted osteogenesis of bone marrow mesenchymal stem cells in vitro. In addition, the BCP/GelMA composite hydrogel markedly promoted new bone formation in the rat skull-defect model.

CONCLUSIONS

BCP/GelMA composite hydrogel may be an effective artificial material for bone tissue engineering.

Effect of different HA/β-TCP coated 3D printed bioceramic scaffolds on repairing large bone defects in rabbits

BACKGROUND

Treatment of large segmental bone defects is still a major clinical challenge, and bone grafting is the main method. The development of novel bone graft substitutes will help solve this problem.

METHODS

Porous bioceramics hydroxyapatite (HA) scaffolds coated with different ratios of HA/β-tricalcium phosphate (β-TCP) were prepared by 3D printing. The scaffolds were sampled and tested in large segmental bone defect rabbit models. X-ray, micro-computed tomography (CT), hematoxylin and eosin (HE) staining, Van-Gieson staining, and type I collagen staining were performed to find the best scaffolds for large segmental bone defect treatment.

RESULTS

The average length, diameter, compressive strength, and porosity of the bioceramics scaffolds were 15.05 ± 0.10 mm, 4.98 ± 0.06 mm, 11.11 ± 0.77 MPa, and 54.26 ± 5.38%, respectively. Postoperative lateral radiographs suggested the scaffold group got better bone healing and stability than the blank group. Micro-CT showed new bones grew into the scaffold from the two ends of the fracture along the scaffold and finally achieved bony union. The new bone volume around the scaffolds suggested the 3:7 HA/β-TCP-coated bioceramic scaffolds were more favorable for the healing of large segmental bone defects. The results of HE, Van-Gieson, and type I collagen staining also suggested more new bone formation in 3:7 HA/β-TCP-coated bioceramic scaffolds.

CONCLUSION

3:7 HA/β-TCP-coated porous bioceramics scaffolds are more conducive to the repair of large bone defects in rabbits. The results of this study can provide some reference and theoretical support in this area.

Biodegradable Implants for Internal Fixation of Fractures and Accelerated Bone Regeneration

Bone fractures have always been a burden to patients due to their common occurrence and severe complications. Traditionally, operative treatments have been widely used in the clinic for implanting, despite the fact that they can only achieve bone fixation with limited stability and pose no effect on promoting tissue growth. In addition, the nondegradable implants usually need a secondary surgery for implant removal, otherwise they may block the regeneration of bones resulting in bone nonunion. To overcome the low degradability of implants and avoid multiple surgeries, tissue engineers have investigated various biodegradable materials for bone regeneration, whereas the significance of stability of long-term bone fixation tends to be neglected during this process. Combining the traditional orthopedic implantation surgeries and emerging tissue engineering, we believe that both bone fixation and bone regeneration are indispensable factors for a successful bone repair. Herein, we define such a novel idea as bone regenerative fixation (BRF), which should be the main future development trend of biodegradable materials.

Role of dendritic cells in MYD88-mediated immune recognition and osteoinduction initiated by the implantation of biomaterials

Bone substitute material implantation has become an important treatment strategy for the repair of oral and maxillofacial bone defects. Recent studies have shown that appropriate inflammatory and immune cells are essential factors in the process of osteoinduction of bone substitute materials. Previous studies have mainly focused on innate immune cells such as macrophages. In our previous work, we found that T lymphocytes, as adaptive immune cells, are also essential in the osteoinduction procedure. As the most important antigen-presenting cell, whether dendritic cells (DCs) can recognize non-antigen biomaterials and participate in osteoinduction was still unclear. In this study, we found that surgical trauma associated with materials implantation induces necrocytosis, and this causes the release of high mobility group protein-1 (HMGB1), which is adsorbed on the surface of bone substitute materials. Subsequently, HMGB1-adsorbed materials were recognized by the TLR4-MYD88-NFκB signal axis of dendritic cells, and the inflammatory response was activated. Finally, activated DCs release regeneration-related chemokines, recruit mesenchymal stem cells, and initiate the osteoinduction process. This study sheds light on the immune-regeneration process after bone substitute materials implantation, points out a potential direction for the development of bone substitute materials, and provides guidance for the development of clinical surgical methods.

Evaluation of the clinical and radiographic effectiveness of treating peri-implant bone defects with a new biphasic calcium phosphate bone graft: a prospective, multicenter randomized controlled trial

PURPOSE

Biphasic calcium phosphate (BCP), a widely used biomaterial for bone regeneration, contains synthetic hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP), the ratio of which can be adjusted to modulate the rate of degradation. The aim of this study was to evaluate the clinical and radiographic benefits of reconstructing peri-implant bone defects with a newly developed BCP consisting of 40% β-TCP and 60% HA compared to demineralized bovine bone mineral (DBBM).

METHODS

This prospective, multicenter, parallel, single-blind randomized controlled trial was conducted at the periodontology departments of 3 different dental hospitals. Changes in clinical (defect width and height) and radiographic (augmented horizontal bone thickness) parameters were measured between implant surgery with guided bone regeneration (GBR) and re-entry surgery. Postoperative discomfort (severity and duration of pain and swelling) and early soft-tissue wound healing (dehiscence and inflammation) were also assessed. Data were compared between the BCP (test) and DBBM (control) groups using the independent t-test and the χ² test.

RESULTS

Of the 53 cases included, 27 were in the test group and 26 were in the control group. After a healing period of 18 weeks, the full and mean resolution of buccal dehiscence defects were 59.3% (n=16) and 71.3% in the test group and 42.3% (n=11) and 57.9% in the control group, respectively. There were no significant differences between the groups in terms of the change in mean horizontal bone augmentation (test group: -0.50±0.66 mm vs. control groups: -0.66±0.83 mm, P=0.133), postoperative discomfort, or early wound healing. No adverse or fatal complications occurred in either group.

CONCLUSION

The GBR procedure with the newly developed BCP showed favorable clinical, radiographic, postoperative discomfort-related, and early wound healing outcomes for peri-implant dehiscence defects that were similar to those for DBBM.

TRIAL REGISTRATION

Clinical Research Information Service Identifier: KCT0006428.

Bicalcium Phosphate as an Asset in Regenerative Therapy

After a loss of a tooth, alveolar bone resorption is immutable, leaving the area devoid of sufficient bone quality and mass for a successful and satisfactory implant or any other dental treatment. To treat this problem of irreversible bone loss, bone grafting is the primary solution and a well-accepted technique. The use of bone grafting procedures has increased in recent years. This review is about the various bone grafting techniques and best-situated material available currently along with their trump cards and limitations. In the thorough discussion regarding bone grafting materials and their substitutes, one alloplastic material has shown unbeaten and the most satisfactory properties than any other material, "bicalcium phosphate" (BCP). BCP is a mixture of hydroxyapatite (HA) and beta-tricalcium phosphate (B-TCP) usually obtained through sintering calcium-deficient apatite (CDA) at or above 700°C or by other methods such as hydrolysis or precipitation. The review also shows comparative studies done to understand the effect, most adequate balance, and impact of ratios of HA/B-TCP on the properties, structure, and success rate of this material. The objective of the review is to enlighten the principal characteristic of the most likely used bone graft material presently, i.e., BCP. The most impeccable characteristic of BCP is its capability to osteointegrate, which results in a superior interface. This interface depicts a dynamic process that includes physicochemical reactions, crystal-protein interactions, cell and tissue colonization, and bone remodeling. BCP has certain essential properties that could be put forth as its advantage over any other substitute. These properties include bioactivity, osteointegration, osteoinduction, osteogenesis, and biodegradation, which are mostly governed by modifying the HA/B-TCP ratio. Other applications of BCP are feasible, such as in drug administration and scaffolds for tissue engineering.

Magnesium-Rich Calcium Phosphate Derived from Tilapia Bone Has Superior Osteogenic Potential

We extracted magnesium-rich calcium phosphate bioceramics from tilapia bone using a gradient thermal treatment approach and investigated their chemical and physicochemical properties. X-ray diffraction showed that tilapia fish bone-derived hydroxyapatite (FHA) was generated through the first stage of thermal processing at 600-800 °C. Using FHA as a precursor, fish bone biphasic calcium phosphate (FBCP) was produced after the second stage of thermal processing at 900-1200 °C. The beta-tricalcium phosphate content in the FBCP increased with an increasing calcination temperature. The fact that the lattice spacing of the FHA and FBCP was smaller than that of commercial hydroxyapatite (CHA) suggests that Mg-substituted calcium phosphate was produced via the gradient thermal treatment. Both the FHA and FBCP contained considerable quantities of magnesium, with the FHA having a higher concentration. In addition, the FHA and FBCP, particularly the FBCP, degraded faster than the CHA. After one day of degradation, both the FHA and FBCP released Mg²⁺, with cumulative amounts of 4.38 mg/L and 0.58 mg/L, respectively. Furthermore, the FHA and FBCP demonstrated superior bone-like apatite formation; they are non-toxic and exhibit better osteoconductive activity than the CHA. In light of our findings, bioceramics originating from tilapia bone appear to be promising in biomedical applications such as fabricating tissue engineering scaffolds.

Human Whole Blood Interactions with Craniomaxillofacial Reconstruction Materials: Exploring In Vitro the Role of Blood Cascades and Leukocytes in Early Healing Events

The present study investigated early interactions between three alloplastic materials (calcium phosphate (CaP), titanium alloy (Ti), and polyetheretherketone (PEEK) with human whole blood using an established in vitro slide chamber model. After 60 min of contact with blood, coagulation (thrombin-antithrombin complexes, TAT) was initiated on all test materials (Ti > PEEK > CaP), with a significant increase only for Ti. All materials showed increased contact activation, with the KK-AT complex significantly increasing for CaP (p < 0.001), Ti (p < 0.01), and PEEK (p < 0.01) while only CaP demonstrated a notable rise in KK-C1INH production (p < 0.01). The complement system had significant activation across all materials, with CaP (p < 0.0001, p < 0.0001) generating the most pronounced levels of C3a and sC5b-9, followed by Ti (p < 0.001, p < 0.001) and lastly, PEEK (p < 0.001, p < 0.01). This activation correlated with leukocyte stimulation, particularly myeloperoxidase release. Consequently, the complement system may assume a more significant role in the early stages post implantation in response to CaP materials than previously recognized. Activation of the complement system and the inevitable activation of leukocytes might provide a more favorable environment for tissue remodeling and repair than has been traditionally acknowledged. While these findings are limited to the early blood response, complement and leukocyte activation suggest improved healing outcomes, which may impact long-term clinical outcomes.

Prospective Clinical Study with New Materials for Tissue Regeneration: A Study in Humans

OBJECTIVE

 This study was performed to evaluate the clinical, radiographic, and histomorphometric outcomes of novel bone grafting materials and dental membranes and to compare the results with current data from the literature.

MATERIALS AND METHODS

 New synthetic bone substitutes, consisting of biphasic calcium phosphate in the ratio of 60% hydroxyapatite and 40% β-tricalcium phosphate, were applied in bony defects and covered by either a novel synthetic poly(lactic-co-glycolic) acid (PLGA) or porcine collagen membrane. A sample of 51 biomaterials was placed in a total of 20 patients during different surgical protocols. Implants were simultaneously inserted, and in the case of sinus floor elevations 6 months later. Pre- and postoperative cone-beam computed tomographies were taken. Bone biopsies were harvested from augmented sides and processed for histomorphometric evaluation.

STATISTICAL ANALYSIS

 Averages and ranges were calculated for the percentage of newly formed bone, residual biomaterial, and connective tissue. Data were submitted to analyze the radiological mean differences in length, width, and density. Paired t-tests were deployed for the analysis of differences within each group between the baseline (preoperative) and the final (postoperative) measurements.

RESULTS

 The mean bone gain in length and width were 0.96 ± 3.33 mm (+27.59%) and 1.22 ± 1.87 mm (+30.48%), respectively. The bone density was increased by a factor of 4, reaching an average of 387.47 ± 328.86 HU. Histomorphometric evaluations revealed new bone formation of 41.44 ± 5.37%, residual biomaterial of 24.91 ± 7.31%, and connective tissue of 33.64 ± 4.81%. The mean healing period was 8.32 ± 3.00 months.

CONCLUSIONS

 Data from this study confirmed the suitability of the tested materials in dental surgery. The biomaterials may be recommended for various clinical procedures. A satisfactory level of increase of new bone was reported in augmented sides. No significant differences were observed between the tested membranes. PLGA membranes might be superior to collagen membranes for their easier handling.

A review of the Masquelet technique in the treatment of lower limb critical-size bone defects

The need for bone tissue to heal effectively is paramount given its role in the mechanical support of tissues. Bone has a very good natural healing potential in comparison with most other tissue types, largely regenerating to its pre-injury state in the vast majority of cases. Certain factors such as high energy trauma, tumour resection, revision surgery, developmental deformities and infection can lead to the formation of bone defects, where the intrinsic healing potential of bone is diminished owing to bone loss. Various approaches to resolving bone defects exist in current practice, each with their respective benefits and drawbacks. These include bone grafting, free tissue transfer, Ilizarov bone transport and the Masquelet induced membrane technique. This review focuses on evaluating the Masquelet technique, discussing its method and underlying mechanisms, the effectiveness of certain modifications, and its potential future directions.

Metabolic regulation by biomaterials in osteoblast

The repair of bone defects resulting from high-energy trauma, infection, or pathological fracture remains a challenge in the field of medicine. The development of biomaterials involved in the metabolic regulation provides a promising solution to this problem and has emerged as a prominent research area in regenerative engineering. While recent research on cell metabolism has advanced our knowledge of metabolic regulation in bone regeneration, the extent to which materials affect intracellular metabolic remains unclear. This review provides a detailed discussion of the mechanisms of bone regeneration, an overview of metabolic regulation in bone regeneration in osteoblasts and biomaterials involved in the metabolic regulation for bone regeneration. Furthermore, it introduces how materials, such as promoting favorable physicochemical characteristics (e.g., bioactivity, appropriate porosity, and superior mechanical properties), incorporating external stimuli (e.g., photothermal, electrical, and magnetic stimulation), and delivering metabolic regulators (e.g., metal ions, bioactive molecules like drugs and peptides, and regulatory metabolites such as alpha ketoglutarate), can affect cell metabolism and lead to changes of cell state. Considering the growing interests in cell metabolic regulation, advanced materials have the potential to help a larger population in overcoming bone defects.

In Vitro Evaluation of Biphasic Calcium Phosphate Scaffolds Derived from Cuttlefish Bone Coated with Poly(ester urea) for Bone Tissue Regeneration

This study investigates the osteogenic differentiation of umbilical-cord-derived human mesenchymal stromal cells (hUC-MSCs) on biphasic calcium phosphate (BCP) scaffolds derived from cuttlefish bone doped with metal ions and coated with polymers. First, the in vitro cytocompatibility of the undoped and ion-doped (Sr²⁺, Mg²⁺ and/or Zn²⁺) BCP scaffolds was evaluated for 72 h using Live/Dead staining and viability assays. From these tests, the most promising composition was found to be the BCP scaffold doped with strontium (Sr²⁺), magnesium (Mg²⁺) and zinc (Zn²⁺) (BCP-6Sr2Mg2Zn). Then, samples from the BCP-6Sr2Mg2Zn were coated with poly(ԑ-caprolactone) (PCL) or poly(ester urea) (PEU). The results showed that hUC-MSCs can differentiate into osteoblasts, and hUC-MSCs seeded on the PEU-coated scaffolds proliferated well, adhered to the scaffold surfaces, and enhanced their differentiation capabilities without negative effects on cell proliferation under in vitro conditions. Overall, these results suggest that PEU-coated scaffolds are an alternative to PCL for use in bone regeneration, providing a suitable environment to maximally induce osteogenesis.

Long-Term Fate and Efficacy of a Biomimetic (Sr)-Apatite-Coated Carbon Patch Used for Bone Reconstruction

Critical bone defect repair remains a major medical challenge. Developing biocompatible materials with bone-healing ability is a key field of research, and calcium-deficient apatites (CDA) are appealing bioactive candidates. We previously described a method to cover activated carbon cloths (ACC) with CDA or strontium-doped CDA coatings to generate bone patches. Our previous study in rats revealed that apposition of ACC or ACC/CDA patches on cortical bone defects accelerated bone repair in the short term. This study aimed to analyze in the medium term the reconstruction of cortical bone in the presence of ACC/CDA or ACC/10Sr-CDA patches corresponding to 6 at.% of strontium substitution. It also aimed to examine the behavior of these cloths in the medium and long term, in situ and at distance. Our results at day 26 confirm the particular efficacy of strontium-doped patches on bone reconstruction, leading to new thick bone with high bone quality as quantified by Raman microspectroscopy. At 6 months the biocompatibility and complete osteointegration of these carbon cloths and the absence of micrometric carbon debris, either out of the implantation site or within peripheral organs, was confirmed. These results demonstrate that these composite carbon patches are promising biomaterials to accelerate bone reconstruction.

Alkaline earth metals for osteogenic scaffolds: From mechanisms to applications

Regeneration of bone defects is a significant challenge today. As alternative approaches to the autologous bone, scaffold materials have remarkable features in treating bone defects; however, the various properties of current scaffold materials still fall short of expectations. Due to the osteogenic capability of alkaline earth metals, their application in scaffold materials has become an effective approach to improving their properties. Furthermore, numerous studies have shown that combining alkaline earth metals leads to better osteogenic properties than applying them alone. In this review, the physicochemical and physiological characteristics of alkaline earth metals are introduced, mainly focusing on their mechanisms and applications in osteogenesis, especially magnesium (Mg), calcium (Ca), strontium (Sr), and barium (Ba). Furthermore, this review highlights the possible cross-talk between pathways when alkaline earth metals are combined. Finally, some of the current drawbacks of scaffold materials are enumerated, such as the high corrosion rate of Mg scaffolds and defects in the mechanical properties of Ca scaffolds. Moreover, a brief perspective is also provided regarding future directions in this field. It is worth exploring that whether the levels of alkaline earth metals in newly regenerated bone differs from those in normal bone. The ideal ratio of each element in the bone tissue engineering scaffolds or the optimal concentration of each elemental ion in the created osteogenic environment still needs further exploration. The review not only summarizes the research developments in osteogenesis but also offers a direction for developing new scaffold materials.

Biodegradable silk fibroin scaffold doped with mineralized collagen induces bone regeneration in rat cranial defects

Compared with most nondegradable or slowly degradable bone repair materials, bioactive biodegradable porous scaffolds with certain mechanical strengths can promote the regeneration of both new bone and vasculature while the cavity created by their degradation can be replaced by the infiltration of new bone tissue. Mineralized collagen (MC) is the basic structural unit of bone tissue, and silk fibroin (SF) is a natural polymer with adjustable degradation rates and superior mechanical properties. In this study, a three-dimensional porous biomimetic composite scaffold with a two-component SF-MC system was constructed based on the advantages of both materials. The spherical mineral agglomerates of the MC were uniformly distributed on the surface and inside the SF skeleton, which ensured good mechanical properties while regulating the degradation rate of the scaffold. Second, the SF-MC scaffold had good osteogenic induction of bone marrow mesenchymal stem cells (BMSCs) and preosteoblasts (MC3T3-E1) and also promoted the proliferation of MC3T3-E1 cells. Finally, in vivo 5 mm cranial defect repair experiments confirmed that the SF-MC scaffold stimulated vascular regeneration and promoted new bone regeneration in vivo by means of in situ regeneration. Overall, we believe that this low-cost biomimetic biodegradable SF-MC scaffold with many advantages has some clinical translation prospects.

Zn-doped Mono- and Biphasic Calcium Phosphate Materials Derived from Agriculture Waste and Their Potential Biomedical Applications: Part I

In this study, calcium phosphate materials were obtained via a simple, eco-friendly wet synthesis method using hen eggshells as a calcium source. It was shown that Zn ions were successfully incorporated into hydroxyapatite (HA). The obtained ceramic composition depends on the zinc content. When doped with 10 mol % of Zn, in addition to HA and Zn-doped HA, DCPD (dicalcium phosphate dihydrate) appeared and its content increased with the increase in Zn concentration. All doped HA materials exhibited antimicrobial activity against S. aureus and E. coli. Nevertheless, fabricated samples significantly decreased preosteoblast (MC3T3-E1 Subclone 4) viability in vitro, exerting a cytotoxic effect which probably resulted from their high ionic reactivity.

Tricalcium Phosphate as a Bone Substitute to Treat Massive Acetabular Bone Defects in Hip Revision Surgery: A Systematic Review and Initial Clinical Experience with 11 Cases

The use of tricalcium phosphate (TCP) as a bone substitute is gaining increasing interest to treat severe acetabular bone defects in revision total hip arthroplasty (rTHA). The aim of this study was to investigate the evidence regarding the efficacy of this material. A systematic review of the literature was performed according to the PRISMA and Cochrane guidelines. The study quality was assessed using the modified Coleman Methodology Score (mCMS) for all studies. A total of eight clinical studies (230 patients) were identified: six on TCP used as biphasic ceramics composed of TCP and hydroxyapatite (HA), and two as pure-phase ceramics consisting of TCP. The literature analysis showed eight retrospective case series, of which only two were comparative studies. The mCMS showed an overall poor methodology (mean score 39.5). While the number of studies and their methodology are still limited, the available evidence suggests safety and overall promising results. A total of 11 cases that underwent rTHA with a pure-phase ceramic presented satisfactory clinical and radiological outcomes at initial short-term follow-up. Further studies at long-term follow-up, involving a larger number of patients, are needed before drawing more definitive conclusions on the potential of TCP for the treatment of patients who undergo rTHA.

Calcium-to-phosphorus releasing ratio affects osteoinductivity and osteoconductivity of calcium phosphate bioceramics in bone tissue engineering

Calcium phosphate (Ca-P) bioceramics, including hydroxyapatite (HA), biphasic calcium phosphate (BCP), and beta-tricalcium phosphate (β-TCP), have been widely used in bone reconstruction. Many studies have focused on the osteoconductivity or osteoinductivity of Ca-P bioceramics, but the association between osteoconductivity and osteoinductivity is not well understood. In our study, the osteoconductivity of HA, BCP, and β-TCP was investigated based on the osteoblastic differentiation in vitro and in situ as well as calvarial defect repair in vivo, and osteoinductivity was evaluated by using pluripotent mesenchymal stem cells (MSCs) in vitro and heterotopic ossification in muscles in vivo. Our results showed that the cell viability, alkaline phosphatase activity, and expression of osteogenesis-related genes, including osteocalcin (Ocn), bone sialoprotein (Bsp), alpha-1 type I collagen (Col1a1), and runt-related transcription factor 2 (Runx2), of osteoblasts each ranked as BCP > β-TCP > HA, but the alkaline phosphatase activity and expression of osteogenic differentiation genes of MSCs each ranked as β-TCP > BCP > HA. Calvarial defect implantation of Ca-P bioceramics ranked as BCP > β-TCP ≥ HA, but intramuscular implantation ranked as β-TCP ≥ BCP > HA in vivo. Further investigation indicated that osteoconductivity and osteoinductivity are affected by the Ca/P ratio surrounding the Ca-P bioceramics. Thus, manipulating the appropriate calcium-to-phosphorus releasing ratio is a critical factor for determining the osteoinductivity of Ca-P bioceramics in bone tissue engineering.

Effect of L-Glutamic Acid on the Composition and Morphology of Nanostructured Calcium Phosphate as Biomaterial

Calcium phosphate (CaP) with several chemical compositions and morphologies was prepared by precipitation using aqueous solutions of L-Glutamic acid (H₂G) and calcium hydroxide, both mixed together with an aqueous solution (0.15 M) of phosphoric acid. Plate-shaped dicalcium phosphate dihydrate (brushite) particles were obtained and identified at a lower concentration of the solution of the reactants. The Ca/P ratio deduced by EDS was ~1, as expected. The nanoscale dimension of carbonate apatite and amorphous calcium phosphate, with variable Ca/P ratios, were revealed by X-ray diffraction (XRD) and scanning electron microscopy and energy dispersive X-ray spectroscopy analysis (SEM-EDS). They were characterized in medium and high concentrations of calcium hydroxide (0.15 M and 0.20 M). The equilibria involved in all the reactions in aqueous solution were determined. The thermodynamic calculations showed a decrease in the amount of chelate complexes with an increase in pH, being the opposite of [CaPO₄^-] and [CaHG⁺]. This fluctuation showed an evident influence on the morphology and polymorphism of CaP particles obtained under the present experimental conditions, with potential use as a biomaterial.

Preclinical evaluation of the effect of periodontal regeneration by carbonate apatite in a canine one-wall intrabony defect model

Objective

This study aimed to histologically compare periodontal regeneration of one-wall intrabony defects treated with open flap debridement, β-tricalcium phosphate (β-TCP), and carbonate apatite (CO₃Ap) in dogs.

Methods

The mandibular third premolars of four beagle dogs were extracted. Twelve weeks after the extraction, a one-wall bone defect of 4 mm × 5 mm (mesio-distal width × depth) was created on the distal side of the mandibular second premolar and mesial side of the fourth premolar. Each defect was randomly allocated to open flap debridement (control group), periodontal regeneration utilizing β-TCP, or CO₃Ap. Eight weeks after the surgery, histologic and histometric analyses were performed.

Results

No ankylosis, infection, or acute inflammation was observed at any of the experimental sites. Newly formed bone and cementum were observed in all experimental groups. The mineral apposition rate of the alveolar bone crest was higher in the CO₃Ap group than in the control and β-TCP groups. The ratio of the new bone area was significantly higher in the CO₃Ap group than in the control group (P < 0.05). The bone contact percentage of the residual granules was significantly higher in the CO₃Ap group than in the β-TCP group (P < 0.05).

Conclusion

Although this study has limitations, the findings revealed the safety and efficacy of CO₃Ap for periodontal regeneration in one-wall intrabony defects in dogs, and CO₃Ap has a better ability to integrate with bone than β-TCP.

The Localized Ionic Microenvironment in Bone Modelling/Remodelling: A Potential Guide for the Design of Biomaterials for Bone Tissue Engineering

Bone is capable of adjusting size, shape, and quality to maintain its strength, toughness, and stiffness and to meet different needs of the body through continuous remodeling. The balance of bone homeostasis is orchestrated by interactions among different types of cells (mainly osteoblasts and osteoclasts), extracellular matrix, the surrounding biological milieus, and waste products from cell metabolisms. Inorganic ions liberated into the localized microenvironment during bone matrix degradation not only form apatite crystals as components or enter blood circulation to meet other bodily needs but also alter cellular activities as molecular modulators. The osteoinductive potential of inorganic motifs of bone has been gradually understood since the last century. Still, few have considered the naturally generated ionic microenvironment's biological roles in bone remodeling. It is believed that a better understanding of the naturally balanced ionic microenvironment during bone remodeling can facilitate future biomaterial design for bone tissue engineering in terms of the modulatory roles of the ionic environment in the regenerative process.