Whole-genome sequencing analysis in fetal structural anomalies: novel phenotype-genotype discoveries

OBJECTIVES

The identification of structural variants and single-nucleotide variants is essential in finding molecular etiologies of monogenic genetic disorders. Whole-genome sequencing (WGS) is becoming more widespread in genetic disease diagnosis. However, data on its clinical utility remain limited in prenatal practice. We aimed to expand our understanding of implementing WGS in the genetic diagnosis of fetal structural anomalies.

METHODS

We employed trio WGS with a minimum coverage of 40× on the MGI DNBSEQ-T7 platform in a cohort of 17 fetuses presenting with aberrations detected by ultrasound, but uninformative findings of standard chromosomal microarray analysis (CMA) and exome sequencing (ES).

RESULTS

Causative genetic variants were identified in two families, with an increased diagnostic yield of 11.8% (2/17). Both were exon-level copy-number variants of small size (3.03 kb and 5.16 kb) and beyond the detection thresholds of CMA and ES. Moreover, to the best of our knowledge, we have described the first prenatal instance of the association of FGF8 with holoprosencephaly and facial deformities.

CONCLUSIONS

Our analysis demonstrates the clinical value of WGS in the diagnosis of the underlying etiology of fetuses with structural abnormalities, when routine genetic tests have failed to provide a diagnosis. Additionally, the novel variants and new fetal manifestations have expanded the mutational and phenotypic spectrums of BBS9 and FGF8. © 2023 International Society of Ultrasound in Obstetrics and Gynecology.

Floating-Point Approximation Enabling Cost-Effective and High-Precision Digital Implementation of FitzHugh-Nagumo Neural Networks

The study of neuron interactions and hardware implementations are crucial research directions in neuroscience, particularly in developing large-scale biological neural networks. The FitzHugh-Nagumo (FHN) model is a popular neuron model with highly biological plausibility, but its complexity makes it difficult to apply at scale. This paper presents a cost-saving and improved precision approximation algorithm for the digital implementation of the FHN model. By converting the computational data into floating-point numbers, the original multiplication calculations are replaced by adding the floating-point exponent part and fitting the mantissa part with piecewise linear. In the hardware implementation, shifters and adders are used, greatly reducing resource overhead. Implementing FHN neurons by this approximation calculations on FPGA reduces the normalized root mean square error (RMSE) to 3.5% of the state-of-the-art (SOTA) while maintaining a performance overhead ratio improvement of 1.09 times. Compared to implementations based on approximate multipliers, the proposed method achieves a 20% reduction in error at the cost of a 2.8% increase in overhead.This model gained additional biological properties compared to LIF while reducing the deployment scale by only 9%. Furthermore, the hardware implementation of nine coupled circular networks with eight nodes and directional diffusion was carried out to demonstrate the algorithm's effectiveness on neural networks. The error decreased to 60% compared to the single neuron of the SOTA. This hardware-friendly algorithm allows for the low-cost implementation of high-precision hardware simulation, providing a novel perspective for studying large-scale, biologically plausible neural networks.

Robust and Corrosion-Resistant Overall Water Splitting Electrode Enabled by Additive Manufacturing

Electrolysis of water has emerged as a prominent area of research in recent years. As a promising catalyst support, copper foam is widely investigated for electrolytic water, yet the insufficient mechanical strength and corrosion resistance render it less suitable for harsh working conditions. To exploit high-performance catalyst supports, various metal supports are comprehensively evaluated, and Ti6 Al4 V (Ti64) support exhibited outstanding compression and corrosion resistance. With this in mind, a 3D porous Ti64 catalyst support is fabricated using the selective laser sintering (SLM) 3D printing technology, and a conductive layer of nickel (Ni) is coated to increase the electrical conductivity and facilitate the deposition of catalysts. Subsequently, Co0.8 Ni0.2 (CO3 )0.5 (OH)·0.11H2 O (CoNiCH) nanoneedles are deposited. The resulting porous Ti64/Ni/CoNiCH electrode displayed an impressive performance in the oxygen evolution reaction (OER) and reached 30 mA cm-2 at an overpotential of only 200 mV. Remarkably, even after being compressed at 15.04 MPa, no obvious structural deformation is observed, and the attenuation of its catalytic efficiency is negligible. Based on the computational analysis, the CoNiCH catalyst demonstrated superior catalytic activity at the Ni site in comparison to the Co site. Furthermore, the electrode reached 30 mA cm-2 at 1.75 V in full water splitting conditions and showed no significant performance degradation even after 60 h of continuous operation. This study presents an innovative approach to robust and corrosion-resistant catalyst design.

Ultra-Sensitive and Stable Multiplexed Biosensors Array in Fully Printed and Integrated Platforms for Reliable Perspiration Analysis

Electrochemical biosensors have emerged as one of the promising tools for tracking human body physiological dynamics via non-invasive perspiration analysis. However, it remains a key challenge to integrate multiplexed sensors in a highly controllable and reproducible manner to achieve long-term reliable biosensing, especially on flexible platforms. Herein, a fully inkjet printed and integrated multiplexed biosensing patch with remarkably high stability and sensitivity is reported for the first time. These desirable characteristics are enabled by the unique interpenetrating interface design and precise control over active materials mass loading, owing to the optimized ink formulations and droplet-assisted printing processes. The sensors deliver sensitivities of 313.28 µA mm-1 cm-2 for glucose and 0.87 µA mm-1 cm-2 for alcohol sensing with minimal drift over 30 h, which are among the best in the literature. The integrated patch can be used for reliable and wireless diet monitoring or medical intervention via epidermal analysis and would inspire the advances of wearable devices for intelligent healthcare applications.

Direct 4D printing of ceramics driven by hydrogel dehydration

4D printing technology combines 3D printing and stimulus-responsive materials, enabling construction of complex 3D objects efficiently. However, unlike smart soft materials, 4D printing of ceramics is a great challenge due to the extremely weak deformability of ceramics. Here, we report a feasible and efficient manufacturing and design approach to realize direct 4D printing of ceramics. Photocurable ceramic elastomer slurry and hydrogel precursor are developed for the fabrication of hydrogel-ceramic laminates via multimaterial digital light processing 3D printing. Flat patterned laminates evolve into complex 3D structures driven by hydrogel dehydration, and then turn into pure ceramics after sintering. Considering the dehydration-induced deformation and sintering-induced shape retraction, we develop a theoretical model to calculate the curvatures of bent laminate and sintered ceramic part. Then, we build a design flow for direct 4D printing of various complex ceramic objects. This approach opens a new avenue for the development of ceramic 4D printing technology.

Highly Efficient Aligned Ion-Conducting Network and Interface Chemistries for Depolarized All-Solid-State Lithium Metal Batteries

Improving the long-term cycling stability and energy density of all-solid-state lithium (Li)-metal batteries (ASSLMBs) at room temperature is a severe challenge because of the notorious solid-solid interfacial contact loss and sluggish ion transport. Solid electrolytes are generally studied as two-dimensional (2D) structures with planar interfaces, showing limited interfacial contact and further resulting in unstable Li/electrolyte and cathode/electrolyte interfaces. Herein, three-dimensional (3D) architecturally designed composite solid electrolytes are developed with independently controlled structural factors using 3D printing processing and post-curing treatment. Multiple-type electrolyte films with vertical-aligned micro-pillar (p-3DSE) and spiral (s-3DSE) structures are rationally designed and developed, which can be employed for both Li metal anode and cathode in terms of accelerating the Li+ transport within electrodes and reinforcing the interfacial adhesion. The printed p-3DSE delivers robust long-term cycle life of up to 2600 cycles and a high critical current density of 1.92 mA cm-2. The optimized electrolyte structure could lead to ASSLMBs with a superior full-cell areal capacity of 2.75 mAh cm-2 (LFP) and 3.92 mAh cm-2 (NCM811). This unique design provides enhancements for both anode and cathode electrodes, thereby alleviating interfacial degradation induced by dendrite growth and contact loss. The approach in this study opens a new design strategy for advanced composite solid polymer electrolytes in ASSLMBs operating under high rates/capacities and room temperature.

Primary perineal endometriosis - a case report and literature review

Endometriosis is a common gynecological disease caused by the implantation of active endometrial cells outside the uterine cavity. In most cases, endometriosis occurs in the pelvic area, such as the ovary, Douglas' pouch, or uterine sacral ligament. Some rare cases of extrapelvic endometriosis can also occur in the perineum, urinary system, gastrointestinal tract, nervous system, chest, subcutaneous tissue, and skin. Endometriosis of the perineum is usually secondary to obstetric trauma, such as perineal laceration or episiotomy. To date, few cases of spontaneous perineal endometriosis have been reported. Herein, we report a rare case of spontaneous deep perineal endometriosis. Notably, the patient had typical symptoms of regular pain during menstruation with no history of delivery or perineal trauma. The patient recovered well after postoperative gonadotropin releasing hormone agonist injection.

[Efficacy and safety of pegylated interferon alpha-2b for patients with myeloproliferative neoplasm]

Objective: To evaluate the efficacy and safety of pegylated interferon alpha-2b (PEG-IFN-α2b) in the treatment of myeloproliferative neoplasm (MPN). Methods: Thirty-four MPN patients receiving PEG-IFN-α2b treatment in the Second Hospital of Tianjin Medical University from August 2019 to October 2022 were prospectively included. Among the patients, 9 were male and 25 were female, and the median age [M (Q1, Q3)] was 57 (19, 78) years. Patients' clinical characteristics were collected and the follow-up was performed. As of January 30, 2023, the follow-up period [M(Q1, Q3)] was 24 (16, 33) months. The efficacy, safety and changes in immune cell and cytokine levels after 12 and 24 months of treatment were analyzed. Results: During the follow-up period, 4 patients dropped out, and the efficacy was evaluable in 30 patients. Following 12 and 24 months of treatment, the complete hematologic response (CHR) rates were 57.1% (16/28) and 75.0% (18/24), respectively. The complete molecular response (CMR)+partial molecular response (PMR) rates were 27.3% (6/22) and 55.0% (11/20), respectively. The bone marrow histopathological overall response rates (ORR) were 34.6% (9/26) and 47.6% (10/21), respectively. At 12 and 24 months of treatment, the proportions of CD8+HLA-DR+T cells, effector T cell subpopulations, CD56bright natural killer (NK) cells, and plasmacytoid dendritic cells (pDC) were higher than the pre-treatment levels, while the proportion of CD56dim NK cells was lower than the pre-treatment level (all P<0.05). The levels of motif chemokine ligand 10 (CXCL10), tumor necrosis factor (TNF)-α and TNF-β in bone marrow all increased from those prior to treatment, while the levels of vascular endothelial growth factor (VEGF) and interleukin (IL-4) decreased from those prior to treatment (all P<0.05). Among hematological adverse reactions, white blood cells decrease [47% (16/34)] was observed with high incidence. Among non-hematological adverse reactions, asthenia [44.1% (15/34)] and transaminases increase [32.3% (11/34)] were observed with high incidences. Conclusions: PEG-IFN-α2b has high hematologic, molecular, and bone marrow histopathological response rates in the treatment of MPN. It can reduce malignant clone loads and regulate the immune microenvironment and is safe and well tolerated overall.

[Research status and challenges of advanced myeloproliferative neoplasms]

Classical myeloproliferative neoplasms (MPN), also known as Ph-MPN, includes polycythemia vera (PV), essential thrombocythemia (ET) and primary myelofibrosis (PMF). Secondary myelofibrosis (sMF) and secondary acute myeloid leukemia (sAML) are important disease progressions of MPN. After MPN disease progression, hematopoietic stem cells undergo new clonal evolution, leading to drug resistance, poor treatment effect and poor survival of patients. In recent years, the exploration of the mechanism of disease progression and the precise diagnosis and treatment of MPN have attracted much attention. This article summarizes the research status of MPN disease progression, including the pathogenesis, risk stratification, and precision treatment, in order to provide reference for exploring new diagnosis and treatment methods of MPN disease progression.

[Analysis of risk factors for thromboembolism in patients with JAK2V617F gene mutation positive myeloproliferative neoplasms]

Objective: To analyze the risk factors of thrombosis in patients with JAK2V617F mutation positive myeloproliferative neoplasms (MPN). Methods: A total of 223 MPN patients with JAK2V617F mutation in the Second Hospital of Tianjin Medical University from September 2017 to May 2023 were retrospectively enrolled, including 111 males and 112 females, aged [M(Q1,Q3)] 57(21,66) years. According to the presence or absence of thromboembolism during follow-up, the patients were divided into thrombosis group (n=102) and non-thrombosis group (n=121). The clinical characteristics, laboratory characteristics, cytogenetics and other disease progression and survival of the two groups of patients were analyzed. As of March 31, 2023, the follow-up period [M (Q1, Q3)] was 6 (3, 10) years. The influencing factors of thrombosis in JAK2V617F positive MPN patients were analyzed by using the Cox risk model. Results: Among 223 JAK2V617F positive MPN patients, 144 were polycythemia vera (PV), 51 were essential thrombocythemia (ET) and 28 were primary myelofibrosis (PMF). The mutation rates of ASXL1 and BCORL1 genes in the thrombosis group were 19.6% (20/102) and 6.9% (7/102), respectively, which were higher than those in the non-thrombosis group [9.1% (11/121) and 0.8% (1/121)] (both P<0.05). The proportion of monocytes, C-reactive protein (CRP), interleukin-1β (IL)-1β, IL-8 and tumor necrosis factor-β (TNF-β) increased in the thrombosis group were higher than those in the non-thrombosis group (all P<0.05). Multivariate analysis showed that age≥60 years (HR=2.132, 95%CI: 1.376-3.303, P=0.001), history of thrombosis (HR=3.636, 95%CI: 2.121-6.202, P<0.001), ASXL1 mutation positive (HR=2.245, 95%CI: 1.093-3.231, P=0.022) and elevated TNF-β (HR=2.009, 95%CI: 1.113-3.624, P=0.021) were risk factors for thrombosis in JAK2V617F positive MPN patients. Conclusions: In addition to age, history of thrombosis and positive ASXL1 mutation, elevated TNF-β is also an influencing factor of thrombosis in JAK2V617F positive MPN patients. Intervention of inflammation may have a certain effect on the prevention and treatment of thrombosis.

Psychometric evaluation of the electronic faces thermometer scale for pain assessment in children 8-17 years old: A study protocol

It is often a challenge for a child to communicate their pain, and their possibilities to do so should be strengthened in healthcare settings. Digital self-assessment provides a potential solution for person-centered care in pain management and promotes child participation when a child is ill. A child's perception of pain assessment differs when it is assessed using digital or analog formats. As we move into the digital era, there is an urgent need to validate digital pain assessment tools, including the newly developed electronic Faces Thermometer Scale (eFTS). This study protocol describes three studies with the overall aim to evaluate psychometric properties of the eFTS for assessing pain in children 8-17 years of age. A multi-site project design combining quantitative and qualitative methods will be used for three observational studies. Study 1: 100 Swedish-speaking children will report the level of anticipated pain from vignettes describing painful situations in four levels of pain and a think-aloud method will be used for data collection. Data will be analyzed with phenomenography as well as descriptive and comparative statistics. Study 2: 600 children aged 8-17 years at pediatric and dental settings in Sweden, Denmark, Iceland, and USA will be included. Children will assess their pain intensity due to medical or dental procedures, surgery, or acute pain using three different pain Scales for each time point; the eFTS, the Faces Pain Scale Revised, and the Coloured Analogue Scale. Descriptive and comparative statistics will be used, with subanalysis taking cultural context into consideration. Study 3: A subgroup of 20 children out of these 600 children will be purposely included in an interview to describe experiences of grading their own pain using the eFTS. Qualitative data will be analyzed with content analysis. Our pilot studies showed high level of adherence to the study procedure and rendered only a small revision of background questionnaires. Preliminary analysis indicated that the instruments are adequate to be used by children and that the analysis plan is feasible. A digital pain assessment tool contributes to an increase in pain assessment in pediatric care. The Medical Research Council framework for complex interventions in healthcare supports a thorough development of a new scale. By evaluating psychometric properties in several settings by both qualitative and quantitative methods, the eFTS will become a well-validated tool to strengthen the child's voice within healthcare.

[Clinical and laboratory features of SF3B1-mutated myeloproliferative neoplasms]

Objective: To explore the clinical and laboratory characteristics of SF3B1 gene mutations in myeloproliferative neoplasms (MPN) patients. Methods: The clinical data of 273 MPN patients who were diagnosed MPN and treated in the Second Hospital of Tianjin Medical University from November 2017 to March 2023 were retrospectively analyzed. There were 133 males and 140 females, with a median age M(Q1,Q3)of 56(46, 67) years. The molecular biology and cytogenetic characteristics were detected by second-generation sequencing (NGS) and R+G banding techniques, and the clinical and laboratory characteristics of patients with SF3B1 gene mutation were analyzed. Results: SF3B1 gene mutations were found in 13 patients (4.8%, 13/273).The types of SF3B1 mutations included missense (92.3%, 12/13) and nonsense mutations (7.7%, 1/13).Compared to the non-mutant cohort, patients in SF3B1 mutant cohort had older ages [68(51, 76) vs 56(45, 66)years,P=0.025], higher proportion of splenomegaly [46.2%(6/13) vs 15.8%(41/259),P=0.014]and secondary tumor [23.1%(3/13)vs 3.8%(10/260), P=0.018]with higher proportion of bone marrow blast [0.5%(0, 1.5%) vs 0(0, 0.5%),P=0.002] and lower hemoglobin[(104±36) vs (137±40) g/L,P=0.004] and hematocrit [31%(22%, 40%) vs 41%(35%, 52%),P=0.003]. All of the 10 patients in the SF3B1 mutant cohort whose ring sideroblast (RS) could be evaluated showed no RS formation. The overall survival, thrombosis-free survival and leukemia free survival of MPN patients in SF3B1 mutant cohort were 4.0 (2.0, 6.0), 2.0 (0.5, 4.5) and 4.0 (2.0, 6.0) years, respectively, while patients in the non-mutant cohort were 6.0 (3.0, 10.0), 5.0 (1.0, 8.0), 6.0 (3.0, 10.0) years, respectively, there were no statistical significance between two groups (Z=3.69, 1.66, 2.05, all P>0.05).The secondary tumor free survival of SF3B1 mutant cohort patients was 4.0 (2.0, 6.0) years, which was lower than that of non-mutant cohort patients [5.5 (3.0, 10.0) years, Z=18.18, P<0.001). Conclusions: MPN patients with SF3B1 gene mutations are older, more prone to splenomegaly and secondary tumors. They also have a higher proportion of bone marrow blast, lower hemoglobin and hematocrit, and show no RS formation.

Retrospective analysis of medical emergencies in an oral emergency department

BACKGROUND

To retrospectively analyze the rescue of medical emergencies and critical patients in the oral emergency department in a hospital during the past 14 years; analyze the general condition of patients, their diagnosis, etiological factors, and outcomes of the disease, so as to improve the ability of oral medical staff to deal with emergencies; and optimize the emergency procedures and resource allocation in such departments.

MATERIAL AND METHODS

Data and related information of critical patient emergency rescue from the Emergency Department of the Hospital of Stomatology, Peking University from January 2006 to December 2019, were analyzed.

RESULTS

A total of 53 critical patients were rescued in the oral emergency department in the past 14 years, which is an average of four cases per year, with an incidence rate of 0.00506%. The main type of emergency included hemorrhagic shock and active hemorrhage, with the highest incidence being in the age group of 19-40 years old. Among these cases, 67.92% (36/53) developed emergency and critical diseases before visiting the oral emergency department and 41.51% (22/53) had systemic diseases. After rescue, a total of 48 patients (90.57%) had stable vital signs and 5 (9.43%) died.

CONCLUSIONS

Oral doctors and other medical staff should be able to rapidly identify medical emergencies in oral emergency departments and commence emergency treatment. The department should be equipped with relevant first-aid drugs and devices, and medical staff should be regularly trained in practical first-aid skills. Patients with oral and maxillofacial trauma, massive hemorrhage and systemic diseases should be evaluated and treated according to their conditions and systemic organ function to prevent and reduce medical emergencies.

Identification of vulnerable carotid plaque with CT-based radiomics nomogram

AIM

To develop and validate a radiomics nomogram for identifying high-risk carotid plaques on computed tomography (CT) angiography (CTA).

MATERIALS AND METHODS

A total of 280 patients with symptomatic (n=131) and asymptomatic (n=139) carotid plaques were divided into a training set (n=135), validation set (n=58), and external test set (n=87). Radiomic features were extracted from CTA images. A radiomics model was constructed based on selected features and a radiomics score (rad-score) was calculated. A clinical factor model was constructed by demographics and CT findings. A radiomics nomogram combining independent clinical factors and the rad-score was constructed. The diagnostic performance of three models was evaluated and validated by region of characteristic curves.

RESULTS

Calcification and maximum plaque thickness were the independent clinical factors. Twenty-four features were used to build the radiomics signature. In the validation set, the nomogram (area under the curve [AUC], 0.977; 95% CI, 0.899-0.999) performed better (p=0.017 and p=0.031) than the clinical factor model (AUC, 0.862; 95% CI, 0.746-0.938) and radiomics signature (AUC, 0.944; 95% CI, 0.850-0.987). In external test set, the nomogram (AUC, 0.952; 95% CI, 0.884-0.987) and radiomics signature (AUC, 0.932; 95% CI, 0.857-0.975) showed better discrimination capability (p=0.002 and p=0.037) than clinical factor model (AUC, 0.818; 95% CI, 0.721-0.892).

CONCLUSION

The CT-based nomogram showed satisfactory performance in identification of high-risk plaques in carotid arteries, and it may serve as a potential non-invasive tool to identify carotid plaque vulnerability and risk stratification.

Design and fabrication of biomimicking radially graded scaffolds via digital light processing 3D printing for bone regeneration

Scaffolds are an essential component in bone tissue engineering (BTE). However, most of the current BTE scaffolds are homogeneous structures and do not resemble the graded architectures of native bone. In the current study, four types of biomimicking scaffold designs based on gyroid (G) and primitive (P) units with radially graded pore sizes were devised, and scaffolds of these designs with two porosity groups (65 vol% and 75 vol%) were fabricated via digital light processing (DLP) 3D printing using biphasic calcium phosphate (BCP). Scaffolds of the gyroid-gyroid (G-G) design displayed better dimensional accuracy, compressive property, and cell proliferation rate than gyroid-primitive (G-P), primitive-gyroid (P-G), and primitive-primitive (P-P) scaffolds. Subsequently, graded G-G scaffolds with different porosities were fabricated and the relationship between compressive strength and porosity was determined. Furthermore, the sintered BCP bioceramics fabricated via current manufacturing process exhibited excellent biocompatibility and bioactivity, indicating their high potential for BTE.

[Alteration and significance of serum lipid levels and nutritional status during BCMA-CAR-T-cell therapy in patients with refractory or relapsed multiple myeloma: a retrospective study based on LEGEND-2]

Objective: To explore the dynamic changes in serum lipid levels and nutritional status during BCMA-CAR-T-cell therapy in patients with refractory or relapsed multiple myeloma (R/R MM) based on LEGEND-2. Methods: The data of patients with R/R MM who underwent BCMA-CAR-T therapy at our hospital between March 30, 2016, and February 6, 2018, were retrospectively collected. Serum lipid levels, controlled nutritional status (CONUT) score, and other clinical indicators at different time points before and after CAR-T-cell infusion were compared and analyzed. The best cut-off value was determined by using the receiver operator characteristic (ROC) curve. The patients were divided into high-CONUT score (>6.5 points, malnutrition group) and low-CONUT score groups (≤6.5 points, good nutrition group), comparing the progression-free survival (PFS) and total survival (OS) of the two groups using Kaplan-Meier survival analysis. Results: Before the infusion of CAR-T-cells, excluding triglycerides (TG), patients' serum lipid levels were lower than normal on average. At 8-14 d after CAR-T-cell infusion, serum albumin (ALB), total cholesterol (TC), high-density lipoprotein (HDL), low-density lipoprotein (LDL), and apolipoprotein A1 (Apo A1) levels dropped to the minimum, whereas CONUT scores reached the maximum. In addition to TG, apolipoprotein B (Apo B) levels increased compared with baseline. After CAR-T-cell therapy, the patients' serum lipid levels significantly increased with well-improved nutritional status. Spearman's related analysis showed that TC, HDL, and ApoA1 levels after CAR-T-cell injection were significantly negatively correlated with the grade of cytokine-release syndrome (CRS) (r=-0.548, P=0.003; r=-0.444, P=0.020; r=-0.589, P=0.001). Furthermore, survival analysis indicated that the CONUT score was unrelated to PFS, and the median OS of patients with R/R MM in the high-CONUT score group was shorter than that in the low-CONUT score group (P=0.046) . Conclusions: During CAR-T-cell therapy, hypolipidemia and poor nutritional status were aggravated, which is possibly related to CRS. The patients' serum lipid levels and nutritional status were significantly improved after CAR-T-cell treatment. The CONUT score affected the median OS in patients treated with CAR-T-cells. Therefore, specific screening and intervention for nutritional status in patients receiving CAR-T-cell therapy are required.

Allisartan Isoproxil Promotes Uric Acid Excretion by Interacting with Intestinal Urate Transporters in Hyperuricemic Zebrafish (Danio rerio)

To evaluate the urate-lowering effect and potential drug targets of antihypertensive agent allisartan isoproxil (ALI) and its bioactive metabolite EXP3174, we developed an acute hyperuricemic zebrafish model using potassium oxonate and xanthine sodium salt. Losartan potassium served as the positive control (reference drug). In this model, ALI and losartan potassium exerted a greater urate-lowering effect than EXP3174 indicating that the latter is not the critical substance for elimination of uric acid. The quantitative real-time PCR showed that ALI upregulates the expression of intestinal urate transporters genes ABCG2, PDZK1, and SLC2A9 (p<0.01). Thus, we can suggest that this substance promotes uric acid excretion mainly by interacting with intestinal urate transporters.

[Clinical analysis of patients with oral and maxillofacial infections in oral emergency]

OBJECTIVE

To analyze the composition, incidence and clinical characteristics of oral and maxillofacial infections in oral emergency.

METHODS

A retrospective study on patients with oral and maxillofacial infections who visited the Department of Oral Emergency in Peking University School and Hospital of Stomatology from January 2017 to December 2019 was conducted. General characteristics, such as disease composition, gender, age distribution and position of involved teeth were analyzed.

RESULTS

A total of 8 277 patients with oral and maxillofacial infections were finally collected, including 4 378 male patients (52.9%) and 3 899 female patients (47.1%), with gender ratio of 1.12:1. The common diseases were periodontal abscess (3 826 cases, 46.2%), alveolar abscess (3 537 cases, 42.7%), maxillofacial space infection (740 cases, 9.0%), sialadenitis (108 cases, 1.3%), furuncle & carbuncle (56 cases, 0.7%) and osteomyelitis (10 cases, 0.1%). Male patients were more easily affected by periodontal abscess, space infection and furuncle & carbuncle than female patients with the gender ratios 1.24:1, 1.26:1, 2.50:1 individually, while the incidence of alveolar abscess, sialadenitis, furuncle & carbuncle had no significant gender difference. Different diseases were prone to occur at different ages. The peak ages of alveolar abscess were 5-9 and 27-67 years, while the peak age of periodontal abscess was 30-64 years. Space infection tended to occur between 21-67 years. There were 7 363 patients with oral abscess (3 826 patients with periodontal abscess and 3 537 patients with alveolar abscess), accounting for 88.9% of all the patients with oral and maxillofacial infections, involving 7 999 teeth, including 717 deciduous teeth and 7 282 permanent teeth. Periodontal abscess usually occurred in permanent teeth, especially the molar teeth. Alveolar abscess may occur in both primary teeth and permanent teeth. In primary teeth, the most vulnerable sites were primary molar teeth and maxillary central incisors while in permanent teeth the most vulnerable sites were first molar teeth.

CONCLUSION

Understanding the incidence of oral and maxillofacial infection was conducive to the correct diagnosis and effective treatment of clinical diseases, as well as targeted education for patients of different ages and genders to prevent the occurrence of diseases.

[Changes and clinical significance of erythrocyte lifespan in megaloblastic anemia]

Objective: To investigate the lifespan of erythrocytes in megaloblastic anemia (MA) patients. Methods: A prospective cohort study analysis. Clinical data from 42 MA patients who were newly diagnosed at the Department of Hematology, Lanzhou University Second Hospital from January 2021 to August 2021 were analyzed, as were control data from 24 healthy volunteers acquired during the same period. The carbon monoxide breath test was used to measure erythrocyte lifespan, and correlations between erythrocyte lifespan and laboratory test indexes before and after treatment were calculated. Statistical analysis included the t-test and Pearson correlation. Results: The mean erythrocyte lifespan in the 42 newly diagnosed MA patients was (49.05±41.60) d, which was significantly shorter than that in the healthy control group [(104.13±42.62) d; t=5.13,P=0.001]. In a vitamin B₁₂-deficient subset of MA patients the mean erythrocyte lifespan was (30.09±15.14) d, and in a folic acid-deficient subgroup it was (72.00±51.44) d, and the difference between these two MA subsets was significant (t=3.73, P=0.001). The mean erythrocyte lifespan after MA treatment was (101.28±33.02) d, which differed significantly from that before MA treatment (t=4.72, P=0.001). In MA patients erythrocyte lifespan was positively correlated with hemoglobin concentration (r=0.373), and negatively correlated with total bilirubin level (r=-0.425), indirect bilirubin level (r=-0.431), and lactate dehydrogenase level (r=-0.504) (all P<0.05). Conclusions: Erythrocyte lifespan was shortened in MA patients, and there was a significant difference between a vitamin B₁₂-deficient group and a folic acid-deficient group. After treatment the erythrocyte lifespan can return to normal. Erythrocyte lifespan is expected to become an informative index for the diagnosis and treatment of MA.

Association of interleukin-6 and CD4+ T cells and two-week prognosis of patients with COVID-19: a predictive role

OBJECTIVE

The aim of this study was to determine the association of inflammation and immune responses with the outcomes of patients at various stages, and to develop risk stratification for improving clinical practice and reducing mortality.

PATIENTS AND METHODS

We included 77 patients with primary outcomes of either death or survival. Demographics, clinical features, comorbidities, and laboratory tests were compared. Linear, logistic, and Cox regression analyses were performed to determine prognostic factors.

RESULTS

The average age was 59 years (35-87 years). There were 12 moderate cases (16.2%), 42 severe cases (54.5%), and 23 critical cases (29.9%); and 41 were male (53.2%). Until March 20, 68 cases were discharged (88.3%), and nine critically ill males (11.7%) died. Interleukin-6 (IL-6) levels on the 1st day were compared with IL-6 values on the 14th day in the severe and the critically ill surviving patients (F=4.90, p=0.034, β=0.35, 95% CI: 0.00-0.10), and predicted death in the critically ill patients (p=0.028, β=0.05, OR: 1.05, 95% CI: 1.01-1.10). CD4+ T-cell counts at admission decreased the hazard ratio of death (p=0.039, β=-0.01, hazard ratio=0.99, 95% CI: 0.98-1.00, and median survival time 13.5 days).

CONCLUSIONS

The present study demonstrated that IL-6 levels and CD4+ T-cell count at admission played key roles of predictors in the prognosis, especially for critically ill patients. High levels of IL-6 and impaired CD4+t cells are seen in severe and critically ill patients with COVID-19.

Manageable Bubble Release Through 3D Printed Microcapillary for Highly Efficient Overall Water Splitting

Porous metal foams (e.g., Ni/Cu/Ti) are applied as catalyst supports extensively for water splitting due to their large specific area and excellent conductivity, however, intrinsic bubble congestion is unavoidable because of the irregular three-dimensional (3D) networks, resulting in high polarization and degraded electrocatalytic performances. To boost the H₂ O decomposition kinetics, the immediate bubble removal and water supply sequential in the gas-liquid-solid interface is essential. Inspired by the high efficiency of water/nutrient transport in the capillaries plants, this work designs a graphene-based capillary array with side holes as catalyst support to manage the bubble release and water supply via a Z-axis controllable digital light processing (DLP) 3D printing technology. Like planting rice, a low-cost, high-active CoNi carbonate hydroxide (CoNiCH) is planted on support. A homemade cell can reach 10 mA cm^-2 in 1.51 V, and be kept at 30 mA cm^-2 for 60 h without noticeable degradation, surpassing most of the known cells. This research provides a promising avenue to design and prepare advanced catalysts in various fields, including energy applications, pollutant treatment, and chemical synthesis.

Image findings of tendon sheaths affected by diffuse tenosynovial giant cell tumors of the skull base

OBJECTIVE

This study investigated radiographic images and the differential diagnosis of intracranial diffuse tenosynovial giant cell tumor (D-TGCT) in order to better understand the disease and improve the rate of preoperative diagnosis.

PATIENTS AND METHODS

Images and clinical data of patients with D-TGCT were retrospectively analyzed. Routine Computer Tomography (CT), routine Magnetic Resonance Imaging (MRI), and contrast-enhanced MRI were performed for nine cases. Susceptibility-weighted imaging (SWI) was also performed for one case.

RESULTS

We reviewed nine patients (6 males and 3 females) aged between 24 and 64 years, with a mean age of 47.33 ± 14.92 years. The most frequent complaints were hearing loss (5/9, 55.6%), pain (4/9, 44%), masticatory symptoms (2/9, 22.2%), and mass (4/9, 44.4%), with a mean duration of 22 ± 21.43 months. All cases were centered on the base of the skull, and showed hyper-density soft-tissue mass with osteolytic bone destruction on CT. The tumor signal mainly showed iso-intensity or hypo-intensity on T1WI compared with that in the brain parenchyma in all patients. On T2WI, nine lesions mainly showed hypo-intensity. Among these nine lesions, three displayed cystic region showing hyper-intensity on T2WI and hypo-intensity on T1WI (Figure 2A, 2B) in the lesion. Nine lesions showed hypo-intensity on DWI sequences. SWI images presented low signal in two cases, showing the "flowering effect". Nine patients showed heterogeneous enhancement, and two patients had meningeal thickening.

CONCLUSIONS

Intracranial D-TGCT is extremely rare, but must be differentiated from other tumors. Osteolytic bone destruction in the area of the skull base with hyper-density soft-tissue mass and hypo-intensity on T2WI images are indicative of D-TGCT.

Effect of antioxidant procyanidin b2 (pcb2) on ovine oocyte developmental potential in response to in vitro maturation (ivm) and vitrification stress

BACKGROUND

It was demonstrated that external stress, such as in vitro maturation (IVM) and vitrification process can induce significantly reduced development capacity in oocytes. Previous studies indicated that antioxidants play a pivotal part in the acquisition of adaptation in changed conditions. At present, the role of the natural potent antioxidant PCB2 in response to IVM and vitrification during ovine oocyte manipulation has not been explored.

OBJECTIVE

To investigate whether PCB2 treatment could improve the developmental potential of ovine oocytes under IVM and vitrification stimuli.

MATERIALS AND METHODS

The experiment was divided into two parts. Firstly, the effect of PCB2 on the development of oocytes during IVM was evaluated. Un-supplemented and 5 ug per mL PCB2-supplemented in the IVM solution were considered as control and experimental groups (C + 5 ug per mL PCB2). The polar body extrusion (PBE) rate, mitochondrial membrane potential (MMP), ATP, reactive oxygen species (ROS) levels and early apoptosis of oocytes were measured after IVM. Secondly, we further determine whether PCB2 could improve oocyte quality under vitrification stress. The survival rate, PBE rate and early apoptosis of oocytes were compared between fresh group, vitrified group and 5 ug per mL PCB2-supplemented in the IVM solution after vitrification (V + 5 ug per mL PCB2).

RESULTS

Compared to the control group, adding PCB2 significantly increased PBE rate (79.4% vs. 62.8%, P < 0.01) and MMP level (1.9 +/- 0.08 vs. 1.3 +/- 0.04, P < 0.01), and decreased ROS level (47.1 +/- 6.3 vs. 145.3 +/- 8.9, P < 0.01). However, there was no significant difference in ATP content and early apoptosis. Compared to the fresh group, vitrification significantly reduced oocytes viability (43.0% vs. 90.8%, P < 0.01) as well as PBE rate (24.2% vs. 60.6%, P < 0.05). However, 5 ug per mL PCB2-supplemention during maturation had no effect on survival, PBE or early apoptosis in vitrified oocytes.

CONCLUSION

PCB2 could effectively antagonise the oxidative stress during IVM and promote oocyte development. DOI: 10.54680/fr23210110412.

MRI parameters for predicting the effect of ultrasound-guided high-intensity focused ultrasound in the ablation of uterine fibroids

AIM

To study the value of magnetic resonance imaging (MRI) parameters in predicting the efficacy of ultrasonic ablation of fibroids.

MATERIALS AND METHODS

A total of 91 patients were divided into groups based on non-perfused volume (NPV) ratio and blood supply type. The preoperative MRI parameters were measured and analysed. A correlation analysis between the MRI parameters and the NPV ratio was performed. Receiver operating characteristic (ROC) curves were used to analyse and determine the cut-off value of MRI parameters to predict the ablation rate of fibroids.

RESULTS

The uterine fibroids group with an NPV ratio <80% and the group with an NPV ratio of ≥80% had significant differences in signal intensity (SI) at MRI T2-weighted imaging (WI), fibroid-to-rectus abdominis SI ratio (SIR) at T2WI, and blood supply type (p<0.05). There were no significant differences in fibroid volume, T2WI signal uniformity, and apparent diffusion coefficient (ADC) values. The ADC value and SI and SIR at MRI T2WI in the group with poor blood supply were lower than those in the group with a rich blood supply (p<0.05). SI at MRI T2WI correlated negatively with the NPV ratio. The cut-off values for SI and SIR at MRI T2WI of fibroids whose NPV ratio exceeds 80% were 220.58 and 1.315, respectively.

CONCLUSION

SI at MRI T2WI and blood supply type could be predictors of the efficacy of ablation. Ultrasonic ablation of fibroids with MRI T2WI hyperintensity and a rich blood supply had poor efficacy.

Association of Dietary Quality with Cognitive Function in Chinese Adults Aged 55 Years and Above: A Longitudinal Study

OBJECTIVES

Diet is an important modifiable factor for brain health and aging. Present study aimed to explore association of dietary quality with cognitive function and poor cognition in middle-aged and older adults participating in the China Health and Nutrition Survey (CHNS).

DESIGN

A longitudinal study with a twenty-year follow-up.

SETTING AND PARTICIPANTS

Data were drawn from the CHNS 1997, 2000, 2004, 2006, 2015 and 2018. Subjects aged 55 years and more who participated in at least two waves and had completed data on socio-demographics, lifestyle, disease history, anthropometrics, dietary measure and cognitive assessment were eligible in present study.

METHODS

Baseline diet were assessed by 3-day 24-hour dietary recalls and used to evaluate diet quality via China Elderly Dietary Guidelines Index 2022 (CDGI 2022-E). Cognitive function was examined using part items of the Telephone Interview for Cognitive Status-modified. Three-level linear mixed effects models and three-level mixed effects logistic regression models were performed to estimate the association between diet quality and cognitive function and odds of poor cognition, respectively.

RESULTS

At baseline, 4173 subjects with median age of 63.7 years were recruited. Median of CDGI 2022-E total score was 44.7. Median score of global cognition was 16.0, and the proportion of people with poor cognitive function was 13.9%. Difference in global cognitive score was observed by tertiles of CDGI 2022-E (p<0.05). Significant associations of high diet quality with increment in global cognitive score [β (95%CI): 0.704 (0.394~1.015)], composite cognitive z score [0.086 (0.045~0.128)] and standardized verbal memory score [0.221 (0.122~0.320)] were observed in total subjects. Consistent associations were also found in those below 65 years at baseline. The likelihood of poor cognition in the highest tertile of CDGI 2022-E decreased by 18% (95%CI: 0.698~0.965) relative to the lowest tertile group in total population.

CONCLUSIONS

High diet quality may be beneficial for improving cognitive function and delaying cognitive decline in Chinese middle-aged and older population.

Research for correlation between heart rate variability parameters and bone mineral density in patients of type 2 diabetes mellitus

PURPOSE

The relationship of CAN and BMD, fracture risk is still unclear in T2DM. The aim of the present study is to investigate the correlation between heart rate variability (HRV) and BMD in T2DM.

METHODS

The study included 276 patients with T2DM aged ≥ 50 years, and Cardiovascular Autonomic Reflex Tests (CARTs) were applied to divide patients into two groups: CAN ( ±). 24 h Ambulatory ECG was assessed for HRV, BMD was measured by dual-energy X-ray bone densitometry, and FRAX scores were calculated for 10-year hip fracture risk (HF¹) and major osteoporotic fracture risk (MOF). Adjusted regression analysis was performed to investigate influence factors for BMD and fracture risk. ROC curve was used to analyze the optimal cut-off point of LF/HF for screening osteoporosis.

RESULTS

Baseline data showed significant differences in the duration of T2DM, insulin resistance index (HOMA-IR), 25-hydroxyvitamin D[25(OH)D], femoral neck BMD, hip BMD, lumbar BMD, HF¹, and MOF between the CAN ( +) and CAN (-) groups. The proportion of patients with osteoporosis increased as the degree of CAN lesion increased. Correlation analysis showed that LF/HF was significantly correlated with BMD, especially with hip (r = - 0.534, p < 0.001). Regression analysis showed that LF/HF was a risk factor for reduced BMD and increased fracture risk. The optimal cut-point value for LF/HF to predict osteoporosis by ROC curve analysis was 3.17.

CONCLUSIONS

CAN is associated with reduced BMD and increased fracture risk in patients with T2DM, and LF/HF may have the potential to be a predictor of diabetic osteoporosis and have some clinical value in early diagnosis of diabetic osteoporosis and non-traumatic fractures in T2DM.

[SENP1 induced protein deSUMO modification increased the chemotherapy sensitivity of endometrial cancer side population cells]

Objective: To inhibit the stemness maintenance potential of endometrial cancer and increase the sensitivity of endometrial cancer side population cells to chemotherapy drugs by inducing extensive deSUMOylation modification of proteins. Methods: Flow cytometry was used to sort and culture CD133(+) CD44(+) KLE endometrial cancer cell clone spheres. Protein expression level of small ubiquitin-related modifier 1 (SUMO1) and two stemness maintenance genes of tumor side population cells, octamer binding transcription factor-4 (Oct4) and sex determining region Y-box2 (Sox2), were detected by western blotting method. Lentivirus-mediated Sentrin/SUMO-specific proteases 1 (SENP1) gene was stably transfected into KLE side population cells. Western blotting was used to detect the protein expressions of SENP1, SUMO1, Oct4 and Sox2. The clone formation rate was compared between KLE side population cells with or without SENP1 overexpression. Flow cytometry was applied to detect cell cycle changes. 3-(4, 5-Dimethylthiazole-2)-2, 5-diphenyl-tetrazolium bromide (MTT) experiment and flow cytometry apoptosis method were used to detect the chemosensitivity of the side population of endometrial cancer cells to cisplatin. Tumor-bearing mouse models of endometrial cancer were established to detect the effect of SENP1 overexpression on the chemotherapy sensitivity of cisplatin. Results: Compared with CD133(-)CD44(-) KLE cells, CD133(+) CD44(+) KLE side population cells could form clonal spheres and express higher levels of SUMO1, Oct4 and Sox2 proteins (P<0.05). Compared with KLE side population cells that were not transfected with SENP1 gene, the expression level of SENP1 protein in KLE side population cells overexpressing SUMO1、Oct4 and Sox2 were lower. The clonal sphere formation rate was reduced from (25.67±5.44)% to (7.46±1.42)%, and cell cycle shifted from G(0)/G(1) phase to G(2) phase. IC(50) of cisplatin decreased from (55.46±6.14) μg/ml to (11.55±3.12) μg/ml, and cell apoptosis rate increased from (9.76±2.09)% to (16.79±3.44)%. Overexpression of SENP1 could reduce the tumorigenesis rate of KLE side population cells in vivo and increase their chemotherapy sensitivity to cisplatin (P<0.05). Conclusion: Overexpression of SENP1 can induce protein deSUMOylation modification, inhibit the stemness maintenance potential of endometrial cancer side population cells, and enhance their chemotherapy sensitivity, which provides a new reference for gene therapy of endometrial cancer.

Evaluating the Utility of Simplicillium lanosoniveum, a Hyperparasitic Fungus of Puccinia graminis f. sp. tritici, as a Biological Control Agent against Wheat Stem Rust

Wheat stem rust is one of the wheat diseases caused by Puccinia graminis Pers. f. sp. tritici (Pgt). This disease has been responsible for major losses to wheat production worldwide. Currently used methods for controlling this disease include fungicides, the breeding of stem rust-resistant cultivars, and preventive agricultural measures. However, the excessive use of fungicides can have various deleterious effects on the environment. A hyperparasitic fungus with white mycelia and oval conidia, Simplicillium lanosoniveum, was isolated from the urediniospores of Pgt. When Pgt-infected wheat leaves were inoculation with isolates of S. lanosoniveum, it was found that S. lanosoniveum inoculation inhibited the production and germination of urediniospores, suggesting that S. lanosoniveum could inhibit the growth and spread of Pgt. Scanning electron microscopy revealed that S. lanosoniveum could inactivate the urediniospores by inducing structural damage. Overall, findings indicate that S. lanosoniveum might provide an effective biological agent for the control of Pgt.

Evaluating a dry vs. wet disinfection in boot baths on detection of porcine epidemic diarrhea virus and porcine reproductive and respiratory virus RNA

Maintaining biosecurity between swine barns is challenging, and boot baths are an easily implementable option some utilize to limit pathogen spread. However, there are concerns regarding their efficacy, especially when comparing wet or dry disinfectants. The objective of this study was to evaluate the efficacy of boot baths in reducing the quantity of detectable porcine epidemic diarrhea virus (PEDV) and porcine reproductive and respiratory syndrome virus (PRRSV) genetic material using wet or dry disinfectants. Treatments included 1) control, 2) dry chlorine powder (Traffic C.O.P., PSP, LLC, Rainsville, AL), and 3) wet quaternary ammonium/glutaraldehyde liquid (1:256 Synergize, Neogen, Lexington, KY). Prior to disinfection, rubber boots were inoculated with 1 mL of a co-inoculants of PRRSV (1×10 5 TCID50/mL) and PEDV (1×10 5 TCID50/mL) and dried for 15 minutes. After the drying period, a researcher placed the boot on the right foot and stepped directly on a stainless steel coupon (control). Alternatively, the researcher stepped first into a boot bath containing either the wet or dry sanitizer, stood for 3 s, and then stepped onto a steel coupon. After one minute, an environmental swab was then collected and processed from each boot and steel coupon. The procedure was replicated 12 times per disinfectant treatment. Samples were analyzed using a duplex qPCR at the Kansas State Veterinary Diagnostic Laboratory. Cycle threshold values were analyzed using SAS GLIMMIX v 9.4 (SAS, Inc., Cary, NC). There was no evidence of a disinfectant × surface × virus interaction (P &gt; 0.10). An interaction between disinfectant × surface impacted (P &lt; 0.05) the quantity of detectable viral RNA. As expected, the quantity of the viruses on the coupon were greatest in the control, indicating that a contaminated boot has the ability to transfer viruses from a contaminated surface to a clean surface. Comparatively, the dry disinfectant treatment resulted in no detectable viral RNA on either the boot or subsequent coupon. The wet disinfectant treatment had statistically similar (P &gt; 0.05) viral contamination to the control on the boot, but less viral contamination compared to the control on the metal coupon. In this experiment, a boot bath with dry powder was the most efficacious in reducing the detectable viral RNA on both boots and subsequent surfaces.

[Association between fasting plasma glucose and mild cognitive impairment in Chinese 55 and older population from four provinces]

Objective: To analyze the association of fasting plasma glucose (FPG) with mild cognitive impairment (MCI) in the Chinese middle-aged and elderly population from four provinces. Methods: Data were drawn from the baseline data of the Community-based Cohort Study on Nervous System Disease 2018-2019. We selected 3 272 subjects aged 55 and above with completed information on demographics, lifestyle, disease history, cognitive test, psychological assessment, and bio-chemistries measurement, and who were capable of performing basic activities of daily living but without Alzheimer's disease during recruitment. A multivariate logistic regression model was employed to analyze the association between FPG and MCI. Results: Median level of FPG in the study population was 5.5 mmol/L. The prevalence of MCI was 24.8%, and those in groups of the FPG quintile were 19.4%, 22.2%, 29.2%, 26.6%, and 26.1%, respectively, which significantly increased the trend (P=0.002). After adjustment of confounders, multivariate logistic regression analysis found that the MCI risk of subjects in the Q₃,Q₄ and Q₅ groups was 1.641 (95%CI: 1.226-2.131), 1.373 (95%CI: 1.036-1.825), 1.402 (95%CI: 1.054-1.871) times as high as that in the Q₁ group, respectively. Conclusion: High FPG level might serve as a risk factor for MCI in the middle-aged and elderly population, suggesting the importance of monitoring and controlling plasma glucose even without diabetes.

[Analysis of 42 cases of childhood superior vena cava syndrome associated with mediastinal malignancy]

Objective: To summarize the clinical features, management and outcome of superior vena cava syndrome (SVCS) associated with mediastinal malignancy in children. Methods: Clinical data of 42 children of SVSC associated with mediastinal malignancy in Shanghai Children's Medical Center from January 2015 to December 2021 were collected and analyzed retrospectively. The clinical manifestations, pathological diagnosis, disease diagnosis process, and prognosis were summarized. Results: Among 42 children of SVCS associated with mediastinal malignancy, there were 31 males and 11 females. The age at diagnosis was 8.5 (1.9, 14.9) years. Cough and wheezing (33 cases, 79%), orthopnea (19 cases, 45%) and facial edema (18 cases, 43%) occurred most commonly. T-cell lymphoblastic lymphoma (T-LBL) was the most frequent pathological diagnosis (25 cases, 60%), followed by T-cell acute lymphoblastic leukemia (T-ALL) (7 cases, 17%), anaplastic large cell lymphoma (4 cases, 10%) and diffuse large B-cell lymphoma (2 cases, 5%), peripheral T-lymphoma, Hodgkin lymphoma, Ewing's sarcoma and germ cell tumor (1 case each). Pathological diagnosis was confirmed by bone marrow aspiration or thoracentesis in 14 cases, peripheral lymph node biopsy in 6 cases, and mediastinal biopsy in 22 cases. Twenty-seven cases (64%) had local anesthesia. Respiratory complications due to mediastinal mass developed in 3 of 15 cases who received general anesthesia. Of the 42 cases, 27 cases had sustained remission, 1 case survived with second-line therapy after recurrence, and 14 cases died (2 cases died of perioperative complications and 12 cases died of recurrence or progression of primary disease). The follow-up time was 36.7 (1.2, 76.1) months for 27 cases in continuous complete remission. The 3-year overall survival (OS) and events free survival (EFS) rates of 42 children were 59% (95%CI 44%-79%) and 58% (95%CI 44%-77%) respectively. Conclusions: SVCS associated with mediastinal malignancy in children is a life-threatening tumor emergency with high mortality. The most common primary disease is T-LBL. The most common clinical symptoms and signs are cough, wheezing, orthopnea and facial edema. Clinical management should be based on the premise of stable critical condition and confirm the pathological diagnosis through minimal invasive operation.

Neobavaisoflavone improves medial collateral ligament-induced osteoarthritis through repressing the nuclear factor -κB/hypoxia-inducible factor-2α axis

Osteoarthritis (OA) is a chronic inflammatory joint disease. There have been some studies on the treatment of OA with traditional Chinese medicine (TCM). Neobavaisoflavone (NBIF) is an isoflavone isolated from TCM Psoralea corylifolia L (also called 'Buguzhi') and shows anti-inflammatory effects. This study aims to explore the potential role of NBIF in treating OA. The rat chondrocytes were dealt with interleukin-1beta (IL-1β) for inducing an in-vitro OA model and a rat OA model was established by medial collateral ligament resection. Followed by NBIF treatment, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide and flow cytometry were performed to evaluate chondrocyte proliferation and apoptosis. The expression of inflammatory factors and oxidative stress factors in chondrocyte medium and rat serum was tested by enzyme-linked immunosorbent assay (ELISA). Hematoxylin-eosin (HE) staining and Safranin O-Fast Green staining were carried out to examine the histopathological changes in knee joints. Caspase-3, nuclear factor-kappaB (NF-κB), and hypoxia-inducible factor-2alpha (HIF-2α) expressions were monitored by quantitative reverse transcription-polymerase chain reaction (qRT-PCR), Western blot, and/or immunohistochemistry. As indicated by the results, NBIF mitigated cartilage matrix degradation and chondrocyte apoptosis in the OA rat model. NBIF hampered IL-1β-mediated cell viability inhibition, apoptosis, inflammatory reactions, and oxidative stress of chondrocytes. Moreover, NBIF suppressed NF-κB phosphorylation and HIF-2α expression. HIF-2α overexpression induced inflammation, oxidative stress, and apoptosis in chondrocytes, while NBIF reversed HIF-2α overexpression-caused chondrocyte damage. Overall, NBIF had antiapoptotic, anti-inflammatory, and antioxidative stress effects in OA models by impeding NF-κB/HIF-2α axis, suggesting that NBIF has potential therapeutic effects in OA.

Pregnancy of cryopreserved ovine embryos at different developmental stages

BACKGROUND

Developmental stage and cryopreservation method have significant impact on the pregnancy rate after transfer of embryos produced in vivo.

OBJECTIVE

To determine the pregnancy outcomes from ovine embryos cryopreserved at different developmental stages.

MATERIALS AND METHODS

Embryos at different developmental stages were obtained from donor ewes through simultaneous estrus treatment and laparoscopic artificial insemination. Embryos, either cryopreserved via vitrification or slow freezing method, were implanted into recipient ewes. The pregnancy rate was determined 35 days after transfer.

RESULTS

The pregnancy rate of developing embryos increases after transfer from the morula stage, early blastocyst to expanded blastocyst stages (64.9%, 73.9% and 81.3%, respectively). However, cryopreservation significantly decreases the pregnancy rate of embryos at all three developmental stages, and there is no significant difference among developmental stages (43.9%, 43.7%, 52.9%, respectively). There is also no significant difference in the pregnancy rate between slowly-frozen embryos and vitrified embryos.

CONCLUSION

The pregnancy outcomes of embryo transfer is better at the expanded blastocyst stage than at earlier stages. However, no difference is observed in the pregnancy rate of embryos at different developmental stage after cryopreservation, either by slow freezing and vitrification. Cryopreservation methods for ovine embryos, both slow freezing and vitrification, need further improvement. doi.org/10.54680/fr22510110512.

3D Printing of Multiscale Ti64-Based Lattice Electrocatalysts for Robust Oxygen Evolution Reaction

Electrically assisted water splitting is an endurable strategy for hydrogen production, but the sluggish kinetics of oxygen evolution reaction (OER) extremely restrict the large-scale production of hydrogen. Developing highly efficient and non-precious catalytic materials is essential to accelerate the sluggish kinetics of OER. However, currently used catalyst supports, such as copper foam, suffer from inferior corrosion resistance and structural stability, resulting in the disabled functionality of 3D conductive networks. To this end, a novel 3D freestanding electrode with corrosion-resistant and robust Ti-6Al-4V titanium alloy lattice as the catalyst support is designed via a 3D printing technology of selective laser melting. After the coating of core-shell Cu(OH)2@CoNi carbonate hydroxides (CoNiCH) on the designed lattice, a unique micro/nano-sized hierarchical porous structure is formed, which endows the electrocatalyst with a promising electrocatalytic activity (a low overpotential of 355 mV at 30 mA cm^-2 and Tafel slope of 125.3 mV dec^-1 ). Computational results indicate that the CoNiCH exhibits optimized electron transfer and the catalytic activity of the Ni site is higher than that of the Co site in the CoNiCH. Therefore, the integration of robust catalyst supports and highly active materials opens up an avenue for reliable and high-performance OER electrocatalysts.

Metallic Scaffold with Micron-Scale Geometrical Cues Promotes Osteogenesis and Angiogenesis via the ROCK/Myosin/YAP Pathway

The advent of precision manufacturing has enabled the creation of pores in metallic scaffolds with feature size in the range of single microns. In orthopedic implants, pore geometries at the micron scale could regulate bone formation by stimulating osteogenic differentiation and the coupling of osteogenesis and angiogenesis. However, the biological response to pore geometry at the cellular level is not clear. As cells are sensitive to curvature of the pore boundary, this study aimed to investigate osteogenesis in high- vs low-curvature environments by utilizing computer numerical control laser cutting to generate triangular and circular precision manufactured micropores (PMpores). We fabricated PMpores on 100 μm-thick stainless-steel discs. Triangular PMpores had a 30° vertex angle and a 300 μm base, and circular PMpores had a 300 μm diameter. We found triangular PMpores significantly enhanced the elastic modulus, proliferation, migration, and osteogenic differentiation of MC3T3-E1 preosteoblasts through Yes-associated protein (YAP) nuclear translocation. Inhibition of Rho-associated kinase (ROCK) and Myosin II abolished YAP translocation in all pore types and controls. Inhibition of YAP transcriptional activity reduced the proliferation, pore closure, collagen secretion, alkaline phosphatase (ALP), and Alizarin Red staining in MC3T3-E1 cultures. In C166 vascular endothelial cells, PMpores increased the VEGFA mRNA expression even without an angiogenic differentiation medium and induced tubule formation and maintenance. In terms of osteogenesis-angiogenesis coupling, a conditioned medium from MC3T3-E1 cells in PMpores promoted the expression of angiogenic genes in C166 cells. A coculture with MC3T3-E1 induced tubule formation and maintenance in C166 cells and tubule alignment along the edges of pores. Together, curvature cues in micropores are important stimuli to regulate osteogenic differentiation and osteogenesis-angiogenesis coupling. This study uncovered key mechanotransduction signaling components activated by curvature differences in a metallic scaffold and contributed to the understanding of the interaction between orthopedic implants and cells.

Markedly decreased growth rate and biofilm formation ability of Acinetobacter schindleri after a long-duration (64 days) spaceflight

OBJECTIVE

The objective of this study was to investigate the effects of long-duration space flight on the biological characteristics of Acinetobacter schindleri (A. schindleri).

MATERIALS AND METHODS

In this study, an A. schindleri strain was collected from condensate water of the Shenzhou-10 spacecraft and then was sent into space again to the Tiangong-2 space lab for a long-duration spaceflight (64 days). Later, the impacts of the long-duration spaceflight on phenotype, genome and transcriptome of A. schindleri were analyzed.

RESULTS

It was found that the long-duration spaceflight markedly decreased the growth rate and biofilm formation ability of A. schindleri. Furthermore, comparative genomic and transcriptomic analyses revealed that the decreased growth rate might be associated with differentially expressed genes (DEGs) involved in transmembrane transport, energy production and conversion, and biofilm was reduced due to downregulation of the pil and algR genes.

CONCLUSIONS

The findings are of major importance for predicting bacterial pathogenesis mechanisms and possible spacecraft contamination during long-duration spaceflights in the future.

[Evaluation of the level of carotid bifurcation and the morphology of extracranial internal carotid artery in patients with carotid stenosis by color doppler ultrasound and digital subtraction angiography]

Objective: To evaluate the value of color Doppler ultrasound and digital subtraction angiography (DSA) in evaluating the level of carotid bifurcation and the morphology of extracranial internal carotid artery in patients with atherosclerotic carotid stenosis. Methods: The carotid artery examination data of 186 patients with atherosclerotic carotid stenosis who underwent carotid DSA and color Doppler ultrasound in Shanghai Changzheng Hospital from July 2017 to June 2019 were retrospectively analyzed, including 154 males and 32 females, with ages ranging from 36 to 84 (66±8) years old. The correlation between the position of carotid bifurcation and the level of cervical spine, the distance from the position of carotid bifurcation to mandibular angle, the correlation of the level of bifurcation with the length of neck, and the incidence of carotid distortion were analyzed. Results: DSA showed that the most common position of carotid bifurcation was at C3 level on the left [37.3% (56/150)], and at C3-C4 level on the right [33.6% (42/125)], and the highest position was at C2 level on the left, and at C2-C3 levels on the right, while the lowest level on both sides was at C5 level. The incidence of high bifurcation of left carotid artery (C3 and above) was 46% (69/150), which was higher than that of right carotid artery [21.6% (27/125), P<0.001]. The incidence of high carotid bifurcation in men and women was 33.2% (76/229) and 43.5% (20/46), respectively, with no significant difference (P = 0.182). Carotid ultrasound showed that the distance between the left carotid bifurcation and the mandibular angle was (3.0±1.3) cm, which was shorter than that on the right [(3.4±1.2) cm] (P<0.001). The distance between carotid bifurcation and mandibular angle in men and women was (3.2±1.2) cm and (3.3±1.0) cm, respectively, with no significant difference (P = 0.093). There was no significant correlation between carotid bifurcation level and carotid length (right: r = 0.02, P = 0.091; left: r = 0.01, P = 0.927). The incidence of carotid artery distortion was 28.1% (9/32) in women and 15.6% (24/154) in men, with no significant difference (P = 0.091). The incidence of right carotid artery distortion in high bifurcation group was 59.3% (16/27), which was higher than that in non-high bifurcation group [3.1% (3/98)] (P<0.001). Likewise, the incidence of left carotid artery distortion in high bifurcation group was 30.4% (21/69), which was higher than that in non-high bifurcation group [2.5% (2/81)] (P<0.001). Conclusions: The bifurcation position of left carotid artery in patients with atherosclerotic carotid stenosis is higher than that of the right. Patients with high bifurcation of carotid artery are more likely to be complicated with carotid distortion. Preoperative color doppler ultrasound combined with DSA can evaluate the distortion of extracranial carotid artery, thereby providing reference for the selection of surgical methods.

Nano-Hydroxyapatite Bone Scaffolds with Different Porous Structures Processed by Digital Light Processing 3D Printing

The morphologies and structures of the scaffold have a significant influence on their mechanical and biological properties. In this work, different types of porous structures: Triply periodic minimal surface-Schwarz primitive (P), body-centered cubic, and cubic pore-shaped (CPS) hydroxyapatite scaffolds with ~70% porosity were fabricated through digital light processing (DLP) 3D printing technology. The compressive properties and in vitro cell evaluations such as cell proliferation and attachment morphology of these scaffolds were systematically compared. The results showed that the CPS scaffolds exhibited the highest compressive strength (~22.5 MPa) and modulus (~400 MPa). In addition, the CPS scaffolds also performed the most active cell metabolisms as compared to other two structures, which may account for the larger pore size and smaller curvature of the substrate. This study provides a general guidance for the fabrication and selection of porous bone scaffolds processed by DLP 3D printing.

Sodium MRI at 7T for Early Response Evaluation of Intracranial Tumors following Stereotactic Radiotherapy Using the CyberKnife

BACKGROUND AND PURPOSE

Conventionally, early treatment response to stereotactic radiotherapy in intracranial tumors is often determined by structural MR imaging. Tissue sodium concentration is altered by cellular integrity and energy status in cells. In this study, we aimed to investigate the feasibility of sodium MR imaging at 7T for the preliminary evaluation of radiotherapeutic efficacy for intracranial tumors.

MATERIALS AND METHODS

Data were collected from 16 patients (12 men and 4 women, 24-75 years of age) with 22 intracranial tumors who were treated with stereotactic radiation therapy using CyberKnife at our institution between December 1, 2016, and August 15, 2019. Sodium MR imaging was performed at 7T before and 48 hours, 1 week, and 1 month after CyberKnife radiation therapy. Tissue sodium concentration (TSC) was calculated and analyzed based on manually labeled regions of tumors.

RESULTS

Ultra-high-field sodium MR imaging clearly showed the intratumoral signal, which is significantly higher than that of normal tissue (t = 5.250, P <.001)., but the edema zone has some influence. The average TSC ratios of tumor to CSF in the 22 tumors, contralateral normal tissues, edema zones, frontal cortex, and frontal white matter were 0.66 (range, 0.23-1.5), 0.30 (range, 0.15-0.43), 0.58 (range, 0.25-1.21), 0.25 (range, 0.17-0.42), and 0.30 (range, 0.19-0.49), respectively. A total of 12 tumors in 8 patients were scanned at 48 hours, 1 week, and 1 month after treatment. The average TSC at 48 hours after treatment was 0.06 higher than that before treatment and began to decrease at 1 week. The TSC ratios of 10 continued to decline and 2 tumors increased at 1 month, respectively. Tumor volume decreased by 2.4%-99% after 3 months.

CONCLUSIONS

Changes in the TSC can be quantified by sodium MR imaging at 7T and used to detect radiobiologic alterations in intracranial tumors at early time points after CyberKnife radiation therapy.

[Management of hepatolenticular degeneration during pregnancy]

Hepatolenticular degeneration (Wilson's disease, WD) is a kind of autosomal recessive genetic disease characterized by disorders of copper metabolism. It is caused by mutations in the ATP7B gene, resulting in impaired excretion of copper into the bile, and then pathological deposition in the liver, brain, and other organs. Early diagnosis and treatment can significantly improve the prognosis of patients with WD. However, there is still no clear consensus on the treatment and management of WD during pregnancy. Herein, the clinical management of WD during pregnancy is summarized for clinicians' reference.

Rapeseed meal-derived N,S self-codoped porous carbon materials for supercapacitors

N,S self-doped porous carbon with high specific surface area and gravimetric specific capacitance from rapeseed meal was successfully synthesized.

[MiR-671-5p negatively regulates SMAD3 to inhibit migration and invasion of osteosarcoma cells]

OBJECTIVE

To explore the role of miR-671-5p in regulating the migration and invasion of osteosarcoma and the underlying mechanisms.

METHODS

The differentially expressed microRNAs (miRNAs) in osteosarcoma were screened in the NCBI online database, and the target proteins of these miRNAs were predicted and their functions were analyzed. Osteosarcoma cells were transfected with a plasmid overexpressing miR-671-5p, and the transfection efficiency was assessed using quantitative real-time PCR (qRT-PCR). The changes in the migration and invasion of the transfected cells were examined with Transwell assay, and the expressions of proteins related with epithelial-mesenchymal transition (EMT) were detected using Western blotting. Dual-luciferase reporter assay was performed to determine whether the 3'UTR of SMAD3 contained a targeted binding site of miR-671-5p.

RESULTS

MiR-671-5p was significantly down-regulated in both osteosarcoma tissues and osteosarcoma cells (P < 0.05). The osteosarcoma cells overexpressing miR-671-5p showed significantly reduced migration and invasion abilities (P < 0.05) with obviously lowered expressions of EMT-related proteins (P < 0.05). SMAD3 was highly expressed in osteosarcoma cells (P < 0.05), and dual-luciferase reporter assay confirmed the presence of a targeted binding site between miR-671-5p and the 3'UTR of SMAD3 (P < 0.05). In osteosarcoma cells transfected with a SMAD3-overexpressing plasmid (P < 0.05), the high expression of SMAD3 significantly inhibited by miR-671-5p overexpression (P < 0.05). Transwell assay demonstrated that SMAD3 overexpression significantly promoted the migration and invasion of osteosarcoma cells (P < 0.05), and while miR-671-5p overexpression obviously reversed this effect (P < 0.05).

CONCLUSION

MiR-671-5p can inhibit the invasion and migration of osteosarcoma cells by negatively regulating SMAD3.