Chitosan-doxycycline hydrogel: An MMP inhibitor/sclerosing embolizing agent as a new approach to endoleak prevention and treatment after endovascular aneurysm repair

Hydrogels for Cardio and Vascular Tissue Repair and Regeneration

Cardiovascular disease (CVD), the leading cause of death globally, affects the heart and arteries with a variety of clinical manifestations, the most dramatic of which are myocardial infarction (MI), abdominal aortic aneurysm (AAA), and intracranial aneurysm (IA) rupture. In MI, necrosis of the myocardium, scar formation, and loss of cardiomyocytes result from insufficient blood supply due to coronary artery occlusion. Beyond stenosis, the arteries that are structurally and functionally connected to the cardiac tissue can undergo pathological dilation, i.e., aneurysmal dilation, with high risk of rupture. Aneurysms of the intracranial arteries (IAs) are more commonly seen in young adults, whereas those of the abdominal aorta (AAA) are predominantly seen in the elderly. IAs, unpredictably, can undergo rupture and cause life-threatening hemorrhage, while AAAs can result in rupture, internal bleeding and high mortality rate. In this clinical context, hydrogels, three-dimensional networks of water-seizing polymers, have emerged as promising biomaterials for cardiovascular tissue repair or protection due to their biocompatibility, tunable properties, and ability to encapsulate and release bioactive molecules. This review provides an overview of the current state of research on the use of hydrogels as an innovative platform to promote cardiovascular-specific tissue repair in MI and functional recovery or protection in aneurysmal dilation.

Injectable Shear-Thinning Hydrogels with Sclerosing and Matrix Metalloproteinase Modulatory Properties for the Treatment of Vascular Malformations

Sac embolization of abdominal aortic aneurysms (AAAs) remains clinically limited by endoleak recurrences. These recurrences are correlated with recanalization due to the presence of endothelial lining and matrix metalloproteinases (MMPs)-mediated aneurysm progression. This study incorporated doxycycline (DOX), a well-known sclerosant and MMPs inhibitor, into a shear-thinning biomaterial (STB)-based vascular embolizing hydrogel. The addition of DOX was expected to improve embolizing efficacy while preventing endoleaks by inhibiting MMP activity and promoting endothelial removal. The results showed that STBs containing 4.5% w/w silicate nanoplatelet and 0.3% w/v of DOX were injectable and had a 2-fold increase in storage modulus compared to those without DOX. STB-DOX hydrogels also reduced clotting time by 33% compared to untreated blood. The burst release of DOX from the hydrogels showed sclerosing effects after 6 h in an ex vivo pig aorta model. Sustained release of DOX from hydrogels on endothelial cells showed MMP inhibition (ca. an order of magnitude larger than control groups) after 7 days. The hydrogels successfully occluded a patient-derived abdominal aneurysm model at physiological blood pressures and flow rates. The sclerosing and MMP inhibition characteristics in the engineered multifunctional STB-DOX hydrogels may provide promising opportunities for the efficient embolization of aneurysms in blood vessels.

Study of vascular sclerosing agent based on the dual mechanism of vascular endothelial cell damage-plasmin system inhibition

Venous malformations are a vascular disorder. Currently, the use of chemical sclerosing agents is a common clinical approach for the treatment of venous malformations. However, the effectiveness of existing sclerosing agents is unsatisfactory and often accompanied by severe side effects. In this study, we have developed a novel cationic surfactant-based sclerosing agent (POL-TA) by conjugating the plasmin inhibitor tranexamic acid (TA) with a nonionic surfactant polidocanol (POL) through an ester bond. POL-TA induces endothelial cell damage, triggering the coagulation cascade and thrombus formation. Moreover, it releases TA in vivo, which inhibits plasmin activity and the activation of matrix metalloproteinase (MMPs), thereby stabilizing the fibrin network of the thrombus and promoting vascular fibrosis. We have established a cell model using venous malformation endothelial cells and assessed the cellular damage and underlying mechanisms of POL-TA. The inhibitory effects of POL-TA on the plasmin-MMPs system were evaluated using MMP-9 activity assay kit. Additionally, the mice tail vein model was employed to investigate the vascular sclerosing effects and mechanisms of POL-TA.

Collagen membrane loaded with doxycycline through hydroxypropyl chitosan microspheres for the early reconstruction of alkali-burned cornea

Corneal alkali burn is one of the most devastating ophthalmic emergencies correlated with remarkable morbidity resulting in severe visual impairment. Appropriate intervention in the acute phase determines the eventual outcome for later corneal restoration treatment. Since the epithelium plays an essential role in inhibiting inflammation and promoting tissue repair, sustained anti-matrix metalloproteinases (MMPs) and pro-epithelialization are the prior remedies during the first week. In this study, a drug-loaded collagen membrane (Dox-HCM/Col) that could be sutured to overlay the burned cornea was developed to accelerate the early reconstruction. Doxycycline (Dox), a specific inhibitor of MMPs, was encapsulated in collagen membrane (Col) through hydroxypropyl chitosan microspheres (HCM) to develop Dox-HCM/Col, affording a preferable pro-epithelialization microenvironment and an in-situ controlled release. Results showed that loading HCM into Col prolonged the release time to 7 days, and Dox-HCM/Col could significantly suppress the expression of MMP-9 and -13 in vitro and in vivo. Furthermore, the membrane accelerated the corneal complete re-epithelialization and promoted early reconstruction within the first week. Overall, Dox-HCM/Col was a promising biomaterial membrane for treating alkali-burned cornea in the early stage, and our attempt may provide a clinically feasible method for the ocular surface reconstruction.

Sodium Phytate-Incorporated Gelatin-Silicate Nanoplatelet Composites for Enhanced Cohesion and Hemostatic Function of Shear-Thinning Biomaterials

Shear-thinning biomaterials (STBs) based on gelatin-silicate nanoplatelets (SNs) are emerging as an alternative to conventional coiling and clipping techniques in the treatment of vascular anomalies. Improvements in the cohesion of STB hydrogels pave the way toward their translational application in minimally invasive therapies such as endovascular embolization repair. In the present study, sodium phytate (Phyt) additives are used to tune the electrostatic network of SNs-gelatin STBs, thereby promoting their mechanical integrity and facilitating injectability through standard catheters. We show that an optimized amount of Phyt enhances storage modulus by approximately one order of magnitude and reduces injection force by ≈58% without compromising biocompatibility and hydrogel wet stability. The Phyt additives are found to decrease the immune responses induced by SNs. In vitro embolization experiments suggest a significantly lower rate of failure in Phyt-incorporated STBs than in control groups. Furthermore, the addition of Phyt leads to accelerated blood coagulation (reduces clotting time by ≈45% compared to controls) due to the contributions of negatively charged phosphate groups, which aid in the prolonged durability of STB in coagulopathic patients. Therefore, the proposed approach is an effective method for the design of robust and injectable STBs for minimally invasive treatment of vascular malformations.

Recent progress in liquid embolic agents

Vascular embolization is a non-surgical procedure used to treat diseases or morbid conditions related to blood vessels, such as bleeding, arteriovenous malformation, aneurysm, and hypervascular tumors, through the intentional occlusion of blood vessels. Among various types of embolic agents that have been applied, liquid embolic agents are gaining an increasing amount of attention owing to their advantages in distal infiltration into regions where solid embolic agents cannot reach, enabling more extensive embolization. Meanwhile, recent advances in biomaterials and technologies have also contributed to the development of novel liquid embolic agents that can resolve the challenges faced while using the existing embolic materials. In this review, we briefly summarize the clinically used embolic agents and their applications, and then present selected research results that overcome the limitations of the embolic agents in use. Through this review, we suggest the required properties of liquid embolic agents that ensure efficacy, which can replace the existing agents, providing directions for the future development in this field.

Electrophoretic deposition of novel semi-permeable coatings on 3D-printed Ti-Nb alloy meshes for guided alveolar bone regeneration

OBJECTIVE

Guided bone regeneration (GBR) techniques use barrier membranes to augment the alveolar ridge for the site-specific growth of bone defects. However, current approaches using cast metal substructures exhibit poor adaptation to the surgical site and increased risk of infection. This study aimed to fabricate multi-functional coatings with 3D-printed porous titanium-niobium (Ti-Nb) alloy meshes to maintain space, prevent the ingrowth of fibroblasts and inhibit the colonization of bacteria for GBR.

METHODS

Ti-Nb alloy meshes were prepared by selective laser melting (SLM) and used as substrates for novel surface coatings. Porous chitosan (CS)/ gelatin (G)/ doxycycline (Dox) coatings were formed on the meshes using electrophoretic deposition (EPD) and freeze-drying. The process of EPD was characterized through Fourier transform infrared spectroscopy (FT-IR), zeta potential, and particle size analysis. The cytotoxicity of the coatings was evaluated through the culture of osteoblasts and immunostaining. The antibacterial activity of the coatings was tested using inhibition zone tests against Staphylococcus aureus (S. aureus) and scanning electron microscope (SEM). The inhibition of fibroblasts infiltration and nutrients transfer properties were analyzed using immunostaining and permeability tests.

RESULTS

High yield strength (567.5 ± 3.5 MPa) and low elastic modulus (65.5 ± 0.2 GPa) were achieved in Ti-Nb alloy bulk samples. The data of zeta potential, FT-IR and SEM indicated that porous spongy coatings were chemically bonded following EPD. In vitro analysis of CSGDox1 (containing Dox at 1 mg·mL^-1) coating revealed its antibacterial effect and biocompatibility. Moreover, the CSGDox1 coating was proved to be effective for preventing the ingrowth of fibroblasts, whilst allowing the infiltration of nutrients.

SIGNIFICANCE

This study verified that the EPD of CSGDox coatings on the 3D-printed Ti-Nb meshes can maintain space, provide antibiotic release whilst maintaining a barrier against soft-tissue growth, which is essential for the success of GBR treatment.

Bone Regeneration Using MMP-Cleavable Peptides-Based Hydrogels

Accumulating evidence has suggested the significant potential of chemically modified hydrogels in bone regeneration. Despite the progress of bioactive hydrogels with different materials, structures and loading cargoes, the desires from clinical applications have not been fully validated. Multiple biological behaviors are orchestrated precisely during the bone regeneration process, including bone marrow mesenchymal stem cells (BMSCs) recruitment, osteogenic differentiation, matrix calcification and well-organized remodeling. Since matrix metalloproteinases play critical roles in such bone metabolism processes as BMSC commitment, osteoblast survival, osteoclast activation matrix calcification and microstructure remodeling, matrix metalloproteinase (MMP) cleavable peptides-based hydrogels could respond to various MMP levels and, thus, accelerate bone regeneration. In this review, we focused on the MMP-cleavable peptides, polymers, functional modification and crosslinked reactions. Applications, perspectives and limitations of MMP-cleavable peptides-based hydrogels for bone regeneration were then discussed.

Antibacterial calcium phosphate cement with human periodontal ligament stem cell-microbeads to enhance bone regeneration and combat infection

Infectious bone defects remain a significant challenge in orthopedics and dentistry. Calcium phosphate cement (CPC) have attracted significant interest in use as local drug delivery system, which with great potential to control release of antibiotics for the treatment of infectious bone defects. Within the current study, a novel antibacterial scaffold of chitosan-reinforced calcium phosphate cement delivering doxycycline hyclate (CPCC + DOX) was developed. Furthermore, the capacity of CPCC + DOX scaffolds for bone regeneration was enhanced by the human periodontal ligament stem cells (hPDLSCs) encapsulated in alginate beads. CPCC + DOX scaffolds were fabricated to contain different concentrations of DOX. Flexural strength of CPCC + DOX ranged from 5.56 ± 0.70 to 6.2 ± 0.72 MPa, which exceeded the reported strength of cancellous bone. Scaffolds exhibited continual DOX release, reaching 80% at 21 days. Scaffold with 5 mg/ml DOX (CPCC + DOX5mg) had a strong antibacterial effect, with a 4-log colony forming unit reduction against S. aureus and P. gingivalis. The proliferation and osteogenic differentiation of hPDLSCs encapsulated in alginate hydrogel microbeads were investigated in culture with CPCC + DOX scaffolds. CPCC + DOX5mg had no negative effect on proliferation of hPDLSCs. Alkaline phosphatase activity, mineral synthesis, and osteogenic gene expressions for CPCC + DOX5mg group were much higher than control group. DOX did not compromise the osteogenic induction. In summary, the novel CPCC + DOX scaffold exhibited excellent mechanical properties and strong antibacterial activity, while supporting the proliferation and osteogenic differentiation of hPDLSCs. The CPCC + DOX + hPDLSCs construct is promising to enhance bone regeneration and combat bone infections in dental, craniofacial, and orthopedic applications.

The feasibility of degradable glass microspheres as transient embolic medical devices

The deliberate occlusion of blood flow through transarterial embolization is currently being used to treat conditions ranging from hemorrhages to hypervascular tumors. Degradable, imageable high borate glass microspheres (BRS2) were developed and tested to improve lesion targeting and promote a temporary vascular occlusion which is sufficient for most embolization procedure. A 48 hour pilot study, in a swine renal model, was conducted to assess the embolization effectiveness and potential risks of this new embolic agent. Bilateral embolization of the caudal branch of the renal arteries using test and control particles were performed in 4 pigs. Embolization efficacy, recanalization and resulting ischemia were evaluated at different time frame (0, 24 and 48 hours). The primary outcomes for this study were the assessment of: (i) embolization effectiveness, and (ii) vessel recanalization. The test article was found to occlude vessels as effectively as the control microspheres, with the use of a smaller volume of microspheres. At the 24 hour time point, over 95% of the material was found to be completely degraded, although little to no recanalization was observed. This data suggests that BRS2 is an effective embolic agent, however further investigations into the method of delivery are required prior to clinical implementation.

Doxycycline drug delivery using hydrogels of O-carboxymethyl chitosan conjugated with caffeic acid and its composite with polyacrylamide synthesized by electron beam irradiation

Two hydrogels of O-carboxymethyl chitosan conjugated with caffeic acid and its composite with polyacrylamide were synthesized using electron beam irradiation. The synthesized hydrogels were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and mechanical properties studies. The hydrogels were loaded with doxycycline by swelling and its release was investigated in various media. The effect of the dose of electron beam irradiation and PAAm amount on the properties of hydrogels including swelling, drug loading, drug release, mechanical properties, and gel content were studied. The release of doxycycline form hydrogels in different media obeyed the mechanism of non-Fickian diffusion and best fitted to the Higuchi model and Korsmeyer-Peppas. In-vitro doxycycline release consideration indicated that the drug's release from composite hydrogel occurs with higher amounts than the other one. The cytotoxic study confirmed the non-toxicity of the prepared hydrogels dressing. Moreover, the growth inhibition of permissive bacteria against Staphylococcus aureus and Escherichia coli were observed for doxycycline-loaded hydrogels. So, the synthesized hydrogels are appropriate for practical application as a new antibacterial wound dressing.

Image-Guided Percutaneous Management of Skull and Spine Giant Cell Tumors: Case Report of 2 Challenging Cases Successfully Treated with Doxycycline Sclerotherapy

Background

A giant cell tumor (GCT) of bone is a benign, locally aggressive tumor that is often challenging to treat. When complete resection is not possible, curettage with or without adjuvants is the most common treatment. The high frequency of local recurrence and risk of injury to adjacent structures can limit this surgical approach, especially with skull and spine lesions.

Case Description

We report 2 cases of axial skeleton GCTs, 1 in the skull of a 58-year-old woman in whom operative management failed, who experienced local recurrence, and 1 in the cervical spine of an 8-year-old girl that grew extracompartmentally to surround her brachial plexus. Both patients were referred to us because of the surgically challenging nature of their tumors. After completion of the same percutaneous doxycycline sclerotherapy protocol previously described for aneurysmal bone cysts (ABCs), both patients were considered cured and were able to return to normal activities without loss of pretreatment function. After 4 and 10 years of follow-up, respectively, there has been no tumor recurrence in either patient.

Conclusions

We successfully treated 2 patients with very challenging axial skeleton GCTs using a percutaneous doxycycline sclerotherapy protocol previously shown to have success with ABCs. We believe that this minimally invasive procedure should be considered a potential alternative treatment for GCTs, especially axial skeleton lesions, which may not be easily approached with standard surgical techniques.

Design of Nanocomposite Injectable Hydrogels for Minimally Invasive Surgery

Biocompatible hydrogels are materials that hold great promise in medicine and biology since the porous structure, the ability to entrap a large amount of water, and the tunability of their mechanical and tissue adhesive properties make them suitable for several applications, including wound healing, drug and cell delivery, cancer treatment, bioelectronics, and tissue regeneration. Among the possible developed systems, injectable hydrogels, owing to their properties, are optimal candidates for in vivo minimally invasive procedures. To be injectable, a hydrogel must be liquid before and during the injection, but it must quickly jellify after injection to form a soft, self-standing, solid material. The possibility to work with a liquid precursor encoding the functions that will be available after gelation allows the development of biocompatible materials that can be employed in surgery and, in particular, in noninvasive procedures. The underlying idea is to reach the target tissue by using just a needle, or by exploiting the natural body orifices, reducing surgery procedure time, induced pain, and risk of infections. Hydrogels with different properties can be obtained by changing the type of cross-linking, the cross-linking density or the molecular weight of the polymer, or by introducing pending functional groups. The introduction of a nanofiller in the hydrogel network allows for expanding the suite of the structural and functional properties and for better mimicking native tissues. In this Account, we discuss how to provide a hydrogel network with designed properties by playing with both the polymeric chains and the fillers. We present selected examples from the literature that show how to introduce stiffness, stretchability, adhesiveness, self-healing, anisotropy, antimicrobial activity, biodegradability, and conductivity in injectable hydrogels. We further describe how the chemical composition, the mechanical properties, and the microarchitecture of the hydrogel influence cell adhesion, proliferation, and differentiation. Examples of injectable hydrogels for innovative minimally invasive procedures are then discussed in detail; in particular, we showcase the use of hydrogels for tumor resection and as vascular chemoembolization agents. We further discuss how one can improve the rheological properties of injectable hydrogels to exploit them in osteochondral tissue engineering. The effect of the introduction of a conductive filler is then presented in relation to the development of electroactive scaffolds for cardiac-tissue engineering and neural and nerve repair. We believe that the rational design of biocompatible, injectable hybrid hydrogels with tunable properties will likely play a crucial role in reducing the invasiveness and improving the outcome of several clinical and surgical setups.

Advances in Biomaterials and Technologies for Vascular Embolization

Minimally invasive transcatheter embolization is a common nonsurgical procedure in interventional radiology used for the deliberate occlusion of blood vessels for the treatment of diseased or injured vasculature. A wide variety of embolic agents including metallic coils, calibrated microspheres, and liquids are available for clinical practice. Additionally, advances in biomaterials, such as shape-memory foams, biodegradable polymers, and in situ gelling solutions have led to the development of novel preclinical embolic agents. The aim here is to provide a comprehensive overview of current and emerging technologies in endovascular embolization with respect to devices, materials, mechanisms, and design guidelines. Limitations and challenges in embolic materials are also discussed to promote advancement in the field.

Microenvironment-Responsive Delivery of the Cas9 RNA-Guided Endonuclease for Efficient Genome Editing

Successful and efficient delivery of Cas9 protein and gRNA into cells is critical for genome editing and its therapeutic application. In this study, we developed an improved supercharged polypeptide (SCP) mediated delivery system based on dithiocyclopeptide linker to realize the effective genome editing in tumor cells. The fusion protein Cas9-linker-SCP (Cas9-LS) forms positively charged complexes with gRNA in vitro to provide possibilities for gRNA delivery into cells. Under the microenvironment of tumor cells, the dithiocyclopeptide linker, containing matrix metalloproteinase 2 (MMP-2) sensitive sequence and an intramolecular disulfide bond, can be completely disconnected to promote the release of Cas9 protein with the nuclear localization sequence (NLS) in the cytoplasm and transfer to the cell nucleus for highly efficient genome editing, resulting in an obvious increase of indel efficiency in comparison to fusion protein without dithiocyclopeptide linker (Cas9-SCP). Furthermore, Cas9-LS shows no significant cytotoxicity and minimal hemolytic activity. We envision that the microenvironment-responsive Cas9 protein delivery system can facilitate more efficient genome editing in tumor cells.