Self-assembling diphenylalanine peptide nanotubes selectively eradicate bacterial biofilm infection

In Situ Forming, Enzyme-Responsive Peptoid-Peptide Hydrogels: An Advanced Long-Acting Injectable Drug Delivery System

Long-acting drug delivery systems are promising platforms to improve patient adherence to medication by delivering drugs over sustained periods and removing the need for patients to comply with oral regimens. This research paper provides a proof-of-concept for the development of a new optimized in situ forming injectable depot based on a tetrabenzylamine-tetraglycine-d-lysine-O-phospho-d-tyrosine peptoid-D-peptide formulation ((NPhe)4GGGGk(AZT)y(p)-OH). The chemical versatility of the peptoid-peptide motif allows low-molecular-weight drugs to be precisely and covalently conjugated. After subcutaneous injection, a hydrogel depot forms from the solubilized peptoid-peptide-drug formulation in response to phosphatase enzymes present within the skin space. This system is able to deliver clinically relevant concentrations of a model drug, the antiretroviral zidovudine (AZT), for 35 days in Sprague-Dawley rats. Oscillatory rheology demonstrated that hydrogel formation began within ∼30 s, an important characteristic of in situ systems for reducing initial drug bursts. Gel formation continued for up to ∼90 min. Small-angle neutron scattering data reveal narrow-radius fibers (∼0.78-1.8 nm) that closely fit formation via a flexible cylinder elliptical model. The inclusion of non-native peptoid monomers and D-variant amino acids confers protease resistance, enabling enhanced biostability to be demonstrated in vitro. Drug release proceeds via hydrolysis of an ester linkage under physiological conditions, releasing the drug in an unmodified form and further reducing the initial drug burst. Subcutaneous administration of (NPhe)4GGGGk(AZT)y(p)-OH to Sprague-Dawley rats resulted in zidovudine blood plasma concentrations within the 90% maximal inhibitory concentration (IC90) range (30-130 ng mL-1) for 35 days.

Non-canonical amino acid bioincorporation into antimicrobial peptides and its challenges

The rise of antimicrobial resistance and multi-drug resistant pathogens has necessitated explorations for novel antibiotic agents as the discovery of conventional antibiotics is becoming economically less viable and technically more challenging for biopharma. Antimicrobial peptides (AMPs) have emerged as a promising alternative because of their particular mode of action, broad spectrum and difficulty that microbes have in becoming resistant to them. The AMPs bacitracin, gramicidin, polymyxins and daptomycin are currently used clinically. However, their susceptibility to proteolytic degradation, toxicity profile, and complexities in large-scale manufacture have hindered their development. To improve their proteolytic stability, methods such as integrating non-canonical amino acids (ncAAs) into their peptide sequence have been adopted, which also improves their potency and spectrum of action. The benefits of ncAA incorporation have been made possible by solid-phase peptide synthesis. However, this method is not always suitable for commercial production of AMPs because of poor yield, scale-up difficulties, and its non-'green' nature. Bioincorporation of ncAA as a method of integration is an emerging field geared towards tackling the challenges of solid-phase synthesis as a green, cheaper, and scalable alternative for commercialisation of AMPs. This review focusses on the bioincorporation of ncAAs; some challenges associated with the methods are outlined, and notes are given on how to overcome these challenges. The review focusses particularly on addressing two key challenges: AMP cytotoxicity towards microbial cell factories and the uptake of ncAAs that are unfavourable to them. Overcoming these challenges will draw us closer to a greater yield and an environmentally friendly and sustainable approach to make AMPs more druggable.

Antimicrobial therapy based on self-assembling peptides

The emergence of drug-resistant microorganisms has threatened global health, and microbial infections have severely limited the use of medical materials. For example, the attachment and colonization of pathogenic bacteria to medical implant materials can lead to wound infections, inflammation and complications, as well as implant failure, shortening their lifespan and even resulting in patient death. In the era of antibiotic resistance, antimicrobial drug discovery needs to prioritize unconventional therapies that act on new targets or adopt new mechanisms. In this regard, supramolecular antimicrobial peptides have emerged as attractive therapeutic platforms, both as bactericides for combination antibiotics and as delivery vehicles. By taking advantage of their programmable intermolecular and intramolecular interactions, peptides can be modified to form higher-order structures (including nanofibers and nanoparticles) with unique functionality. This paper begins with an analysis of the relationship between peptide self-assembly and antimicrobial activity, describes in detail the research and development of various self-assembled antimicrobial peptides in recent years, and finally explores different combinatorial strategies for self-assembling antimicrobial peptides.

Stimuli-responsive peptide assemblies: Design, self-assembly, modulation, and biomedical applications

Peptide molecules have design flexibility, self-assembly ability, high biocompatibility, good biodegradability, and easy functionalization, which promote their applications as versatile biomaterials for tissue engineering and biomedicine. In addition, the functionalization of self-assembled peptide nanomaterials with other additive components enhances their stimuli-responsive functions, promoting function-specific applications that induced by both internal and external stimulations. In this review, we demonstrate recent advance in the peptide molecular design, self-assembly, functional tailoring, and biomedical applications of peptide-based nanomaterials. The strategies on the design and synthesis of single, dual, and multiple stimuli-responsive peptide-based nanomaterials with various dimensions are analyzed, and the functional regulation of peptide nanomaterials with active components such as metal/metal oxide, DNA/RNA, polysaccharides, photosensitizers, 2D materials, and others are discussed. In addition, the designed peptide-based nanomaterials with temperature-, pH-, ion-, light-, enzyme-, and ROS-responsive abilities for drug delivery, bioimaging, cancer therapy, gene therapy, antibacterial, as well as wound healing and dressing applications are presented and discussed. This comprehensive review provides detailed methodologies and advanced techniques on the synthesis of peptide nanomaterials from molecular biology, materials science, and nanotechnology, which will guide and inspire the molecular level design of peptides with specific and multiple functions for function-specific applications.

RAFT-synthesis and self-assembly-induced emission of pendant diphenylalanine-tetraphenylethylene copolymers

Manipulation of the properties of aggregation-induced emission luminogens (AIEgens) by combining self-assembling motifs has attracted significant interest as a promising approach to developing various advanced materials. In this study, pendant diphenylalanine-tetraphenylethylene (TPE) copolymers exhibiting the ability for self-assembly and AIE properties were synthesized via reversible addition-fragmentation chain-transfer (RAFT) copolymerization. The resulting anionic and non-ionic amphiphilic copolymers with a carbon-carbon main chain bearing diphenylalanine-TPE through-space interactions self-assembled into nanorods and nanofibers, showing blue emissions originating from the aggregation of TPE side chains in the assembled structures. Suitable tuning of the comonomer composition, monomer structure, and environmental conditions (e.g., solvent polarity) enables manipulation of the self-assembled structures, AIE properties, and aggregation-induced circular dichroism by achiral TPE units via through-space interactions with diphenylalanine moieties.

Histidine modulates amyloid-like assembly of peptide nanomaterials and confers enzyme-like activity

Amyloid-like assembly is not only associated with pathological events, but also leads to the development of novel nanomaterials with unique properties. Herein, using Fmoc diphenylalanine peptide (Fmoc-F-F) as a minimalistic model, we found that histidine can modulate the assembly behavior of Fmoc-F-F and induce enzyme-like catalysis. Specifically, the presence of histidine rearranges the β structure of Fmoc-F-F to assemble nanofilaments, resulting in the formation of active site to mimic peroxidase-like activity that catalyzes ROS generation. A similar catalytic property is also observed in Aβ assembled filaments, which is correlated with the spatial proximity between intermolecular histidine and F-F. Notably, the assembled Aβ filaments are able to induce cellular ROS elevation and damage neuron cells, providing an insight into the pathological relationship between Aβ aggregation and Alzheimer's disease. These findings highlight the potential of histidine as a modulator in amyloid-like assembly of peptide nanomaterials exerting enzyme-like catalysis.

Enzyme-Triggered l-α/d-Peptide Hydrogels as a Long-Acting Injectable Platform for Systemic Delivery of HIV/AIDS Drugs

Eradicating HIV/AIDS by 2030 is a central goal of the World Health Organization. Patient adherence to complicated dosage regimens remains a key barrier. There is a need for convenient long-acting formulations that deliver drugs over sustained periods. This paper presents an alternative platform, an injectable in situ forming hydrogel implant to deliver a model antiretroviral drug (zidovudine [AZT]) over 28 days. The formulation is a self-assembling ultrashort d or l-α peptide hydrogelator, namely phosphorylated (naphthalene-2-ly)-acetyl-diphenylalanine-lysine-tyrosine-OH (NapFFKY[p]-OH), covalently conjugated to zidovudine via an ester linkage. Rheological analysis demonstrates phosphatase enzyme instructed self-assembly, with hydrogels forming within minutes. Small angle neutron scattering data suggest hydrogels form narrow radius (≈2 nm), large length fibers closely fitting the flexible cylinder elliptical model. d-Peptides are particularly promising for long-acting delivery, displaying protease resistance for 28 days. Drug release, via hydrolysis of the ester linkage, progress under physiological conditions (37 °C, pH 7.4, H2 O). Subcutaneous administration of Napffk(AZT)Y[p]G-OH in Sprague Dawley rats demonstrate zidovudine blood plasma concentrations within the half maximal inhibitory concentration (IC50 ) range (30-130 ng mL-1 ) for 35 days. This work is a proof-of-concept for the development of a long-acting combined injectable in situ forming peptide hydrogel implant. These products are imperative given their potential impact on society.

An Ultrastable Self-Assembled Antibacterial Nanospears Made of Protein

Protein-based nanomaterials have broad applications in the biomedical and bionanotechnological sectors owing to their outstanding properties such as high biocompatibility and biodegradability, structural stability, sophisticated functional versatility, and being environmentally benign. They have gained considerable attention in drug delivery, cancer therapeutics, vaccines, immunotherapies, biosensing, and biocatalysis. However, so far, in the battle against the increasing reports of antibiotic resistance and emerging drug-resistant bacteria, unique nanostructures of this kind are lacking, hindering their potential next-generation antibacterial agents. Here, the discovery of a class of supramolecular nanostructures with well-defined shapes, geometries, or architectures (termed "protein nanospears") based on engineered proteins, exhibiting exceptional broad-spectrum antibacterial activities, is reported. The protein nanospears are engineered via spontaneous cleavage-dependent or precisely tunable self-assembly routes using mild metal salt-ions (Mg²⁺ , Ca²⁺ , Na⁺ ) as a molecular trigger. The nanospears' dimensions collectively range from entire nano- to micrometer scale. The protein nanospears display exceptional thermal and chemical stability yet rapidly disassemble upon exposure to high concentrations of chaotropes (>1 mm sodium dodecyl sulfate (SDS)). Using a combination of biological assays and electron microscopy imaging, it is revealed that the nanospears spontaneously induce rapid and irreparable damage to bacterial morphology via a unique action mechanism provided by their nanostructure and enzymatic action, a feat inaccessible to traditional antibiotics. These protein-based nanospears show promise as a potent tool to combat the growing threats of resistant bacteria, inspiring a new way to engineer other antibacterial protein nanomaterials with diverse structural and dimensional architectures and functional properties.

Nanotubes and water-channels from self-assembling dipeptides

Dipeptides are attractive building blocks for biomaterials in light of their inherent biocompatibility, biodegradability, and simplicity of preparation. Since the discovery of diphenylalanine (Phe-Phe) self-assembling ability into nanotubes, research efforts have been devoted towards the identification of other dipeptide sequences capable of forming these interesting nanomorphologies, although design rules towards nanotube formation are still elusive. In this review, we analyze the dipeptide sequences reported thus far for their ability to form nanotubes, which often feature water-filled supramolecular channels as revealed by single-crystal X-ray diffraction, as well as their properties, and their potential biological applications, which span from drug delivery and regenerative medicine, to bioelectronics and bioimaging.

Dipeptide nanostructures: Synthesis, interactions, advantages and biomedical applications

Short peptides are important in the design of self-assembled materials due to their versatility and flexibility. Self-assembled dipeptides, a group of peptide nanostructures, have highly attractive uses in the field of biomedicine. Recently these materials have proved to be important nanostructures because of their biocompatibility, low-cost and simplicity of synthesis, functionality/easy tunability and nano dimensions. Although there are different studies on peptide and protein-based nanostructures, more information about self-assembled nanostructures for dipeptides is still required to discover the advantages, challenges, importance, synthesis, interactions, and applications. This review describes and discusses the self-assembled dipeptide nanostructures especially for biomedical applications.

Antimicrobial Natural Hydrogels in Biomedicine: Properties, Applications, and Challenges-A Concise Review

Natural hydrogels are widely used as biomedical materials in many areas, including drug delivery, tissue scaffolds, and particularly wound dressings, where they can act as an antimicrobial factor lowering the risk of microbial infections, which are serious health problems, especially with respect to wound healing. In this review article, a number of promising strategies in the development of hydrogels with biocidal properties, particularly those originating from natural polymers, are briefly summarized and concisely discussed. Common strategies to design and fabricate hydrogels with intrinsic or stimuli-triggered antibacterial activity are exemplified, and the mechanisms lying behind these properties are also discussed. Finally, practical antibacterial applications are also considered while discussing the current challenges and perspectives.

Hybrid Hydrogels of FKF-Peptide Assemblies and Gelatin for Sustained Antimicrobial Activity

The growing resistance of pathogenic bacteria to conventional antibiotics promotes the development of new antimicrobial agents, including peptides. Hydrogels composed of antimicrobial peptides (AMPs) may be applied as topical treatments for skin infection and wound regeneration. The unique antimicrobial and ultrashort-peptide FKF (Phe-Lys-Phe) was recently demonstrated to form bactericidal hydrogels. Here, we sought to improve the cyto-biocompatibility of FKF by combining FKF hydrogels with gelatin. Homogeneous hybrid hydrogels of FKF:gelatin were developed based on a series of self-assembly steps that involved mixing solutions of the two components with no covalent cross-linkers. The hydrogels were characterized for their structural features, dissolution, cyto-biocompatibility, and antibacterial properties. These hybrid hydrogels first release the antibacterial FKF assemblies, leaving the gelatinous fraction of the hydrogel to serve as a scaffold for tissue regeneration. Sponges of these hybrid hydrogels, obtained by lyophilization and rehydrated prior to application, exhibited enhanced antimicrobial activity compared to the hydrogels' formulations.

Self-Assembled Peptide-Based Nanodrugs: Molecular Design, Synthesis, Functionalization, and Targeted Tumor Bioimaging and Biotherapy

Functional nanomaterials as nanodrugs based on the self-assembly of inorganics, polymers, and biomolecules have showed wide applications in biomedicine and tissue engineering. Ascribing to the unique biological, chemical, and physical properties of peptide molecules, peptide is used as an excellent precursor material for the synthesis of functional nanodrugs for highly effective cancer therapy. Herein, recent progress on the design, synthesis, functional regulation, and cancer bioimaging and biotherapy of peptide-based nanodrugs is summarized. For this aim, first molecular design and controllable synthesis of peptide nanodrugs with 0D to 3D structures are presented, and then the functional customization strategies for peptide nanodrugs are presented. Then, the applications of peptide-based nanodrugs in bioimaging, chemotherapy, photothermal therapy (PTT), and photodynamic therapy (PDT) are demonstrated and discussed in detail. Furthermore, peptide-based drugs in preclinical, clinical trials, and approved are briefly described. Finally, the challenges and potential solutions are pointed out on addressing the questions of this promising research topic. This comprehensive review can guide the motif design and functional regulation of peptide nanomaterials for facile synthesis of nanodrugs, and further promote their practical applications for diagnostics and therapy of diseases.

Synthesis and self-assembly of a diphenylalanine–tetraphenylethylene hybrid monomer and RAFT polymers with aggregation-induced emission

A hybrid monomer consisting of diphenylalanine with the self-assembling ability and tetraphenylethylene with aggregation-induced emission properties was synthesized and employed for reversible addition–fragmentation chain transfer polymerization.

Antibacterial and Antibiofilm Properties of Self-Assembled Dipeptide Nanotubes

Over recent decades, multidrug-resistant pathogens have become a global concern, with WHO even considering it one of the biggest threats to global health, food security, and development today, which led to the search for alternative antibacterial agents. A special class is formed by peptides composed by the diphenylalanine motif whose antibacterial properties result from their supramolecular arrangement into nanotubes. However, several other dipeptides that also form nanotubes have been largely overlooked. Here, we present the antibacterial activity of four dipeptide nanotubes. The results point to diverse mechanisms through which dipeptide nanotubes exert their effect against bacteria. Antibacterial activity was similar for dipeptide nanotubes sufficiently wide to allow water flux while dipeptides displaying smaller channels were inactive. This suggests that two of the tested dipeptides, L-Phe-L-Phe (FF, diphenylalanine) and L-Leu-L-Ser (LS), are pore forming structures able to induce membrane permeation and affect cellular hydration and integrity. Of these two dipeptides, only FF demonstrated potential to inhibit biofilm formation. The amyloid-like nature and hydrophobicity of diphenylalanine assemblies are probably responsible for their adhesion to cell surfaces preventing biofilm formation and bacteria attachment.

Importance of Solvent-Bridged Structures of Fluorinated Diphenylalanines: Synthesis, Detailed NMR Analysis, and Rotational Profiles of Phe(2-F)-Phe(2-F), Phe(2-F)-Phe, and Phe-Phe(2-F)

The crystal structure of l-phenylalanyl l-phenylalanine (Phe-Phe, FF, a.k.a. diphenylalanine) is not merely noncentrosymmetric, but it is highly dipole parallel aligned. It is for this reason that FF is a nonlinear optical (NLO) material and exhibits strong second harmonic generation (SHG). Enhancement of the SHG response by ortho fluorination was demonstrated. Crystallization is nontrivial, and learning about the zwitterion structures in solution is important for the rational improvement of the crystallization process. Here, we present an NMR study of di-fluorinated FF (Phe(2-F)-Phe(2-F)) and mono-fluorinated FF isomers (Phe(2-F)-Phe and Phe-Phe(2-F)). The dipeptides were prepared by solid-phase synthesis and purified by high-performance liquid chromatography (HPLC). Their ¹H and ¹³C NMR spectra were recorded in partially deuterated water (10% D₂O), and two-dimensional (2D) NMR techniques were employed for signal assignments. The unambiguous assignments are reported of all chemical shifts for the aliphatic H and C atoms and of the C atoms of the carboxylate, the amide carbonyl, the CF carbons, and of every arene C atom in each phenyl ring. The dipeptides are trans amides and intramolecular hydrogen bonding between the ammonium group and the amide carbonyl restricts the H₃N-CH-C(O) geometry. We explored the rotational profile of the diphenylalanines as a function of the τ = ∠(C-N-C-CO₂) dihedral angle at the SMD(B3LYP/6-31G*) level without and with specific hydration and report the associated Karplus curves J(θ) vs θ = ∠(H-N-C-H). The rotational profiles show a maximum of three stationary structures, and relative conformer stabilities of the free diphenylalanines show that the conformation found in the crystal M1 is the least stable among the three, M3 > M2 ≫ M1. Specific water solvation makes all of the difference and adds a large competitive advantage to the water-bridged ion pair M1a. In fact, M1a becomes the most stable and dominant conformation for the parent diphenylalanine and mono1 F-FF and M1a becomes competitive with M3c for mono2 F-FF and di F-FF. Implications are discussed regarding the importance of the conformational preorganization of diphenylalanines in solution and the facility for their crystallization.

Advancements in antimicrobial nanoscale materials and self-assembling systems

Antimicrobial resistance is directly responsible for more deaths per year than either HIV/AIDS or malaria and is predicted to incur a cumulative societal financial burden of at least $100 trillion between 2014 and 2050. Already heralded as one of the greatest threats to human health, the onset of the coronavirus pandemic has accelerated the prevalence of antimicrobial resistant bacterial infections due to factors including increased global antibiotic/antimicrobial use. Thus an urgent need for novel therapeutics to combat what some have termed the 'silent pandemic' is evident. This review acts as a repository of research and an overview of the novel therapeutic strategies being developed to overcome antimicrobial resistance, with a focus on self-assembling systems and nanoscale materials. The fundamental mechanisms of action, as well as the key advantages and disadvantages of each system are discussed, and attention is drawn to key examples within each field. As a result, this review provides a guide to the further design and development of antimicrobial systems, and outlines the interdisciplinary techniques required to translate this fundamental research towards the clinic.

In pursuit of next-generation therapeutics: Antimicrobial peptides against superbugs, their sources, mechanism of action, nanotechnology-based delivery, and clinical applications

Antimicrobial peptides (AMPs) attracted attention as potential source of novel antimicrobials. Multi-drug resistant (MDR) infections have emerged as a global threat to public health in recent years. Furthermore, due to rapid emergence of new diseases, there is pressing need for development of efficient antimicrobials. AMPs are essential part of the innate immunity in most living organisms, acting as the primary line of defense against foreign invasions. AMPs kill a wide range of microorganisms by primarily targeting cell membranes or intracellular components through a variety of ways. AMPs can be broadly categorized based on their physico-chemical properties, structure, function, target and source of origin. The synthetic analogues produced either with suitable chemical modifications or with the use of suitable delivery systems are projected to eliminate the constraints of toxicity and poor stability commonly linked with natural AMPs. The concept of peptidomimetics is gaining ground around the world nowadays. Among the delivery systems, nanoparticles are emerging as potential delivery tools for AMPs, amplifying their utility against a variety of pathogens. In the present review, the broad classification of various AMPs, their mechanism of action (MOA), challenges associated with AMPs, current applications, and novel strategies to overcome the limitations have been discussed.

Gram-selective antibacterial peptide hydrogels

The human microbiome plays fundamental roles in human health and disease. However, widely used broad-spectrum antibiotics severely disrupt human-related microbial communities, eventually leading to resistant bacteria, posing a growing threat to global medical health. Antimicrobial peptides (AMPs) are promising antimicrobial agents that barely cause bacterial resistance. Excellent broad-spectrum antimicrobial activities have been achieved using hydrogels self-assembled from AMPs, but there is still a lack of AMP hydrogels that can target Gram-positive and Gram-negative bacteria. Herein, several hydrogels self-assembled from AMPs, termed IK1, IK3, and IK4, were designed and synthesized. In vitro antibacterial results indicated that the IK1 and IK4 hydrogels specifically targeted Gram-positive and Gram-negative bacteria, respectively, while the IK3 hydrogel targeted both Gram-positive and Gram-negative bacteria. The desired broad-spectrum or Gram-selective AMP hydrogels are believed to be obtained through the rational design of the hydrophilicity, hydrophobicity, and charge properties of the peptide molecules. Good in vivo Gram-selective antibacterial properties and the ability to promote wound healing have been demonstrated via treating mouse wound models with these AMP hydrogels. We believe that these Gram-selective AMP hydrogels could potentially have important applications in treating common recurring infections.

Co-assembled Coiled-Coil Peptide Nanotubes with Enhanced Stability and Metal-Dependent Cargo Loading

Peptide nanotube biomaterials are attractive for their range of applications. Herein, we disclose the co-assembly of coiled-coil peptides, one with ligands for metal ions that demonstrate hierarchical assembly into nanotubes, with spatial control of the metal-binding ligands. Enhanced stability of the nanotubes to phosphate-buffered saline was successfully accomplished in a metal-dependent fashion, depending on the levels and placement of the ligand-containing coiled-coil peptide. This spatial control also allowed for site-specific labeling of the nanotubes with His-tagged fluorophores through the length of the tubes or at the termini, in a metal-dependent manner.

Designing Self-Assembling Chimeric Peptide Nanoparticles with High Stability for Combating Piglet Bacterial Infections

As a novel type of antibiotic alternative, peptide-based antibacterial drug shows potential application prospects attributable to their unique mechanism for lysing the membrane of pathogenic bacteria. However, peptide-based antibacterial drugs suffer from a series of problems, most notably their immature stability, which seriously hinders their application. In this study, self-assembling chimeric peptide nanoparticles (which offer excellent stability in the presence of proteases and salts) are constructed and applied to the treatment of bacterial infections. In vitro studies are used to demonstrate that peptide nanoparticles NPs1 and NPs2 offer broad-spectrum antibacterial activity and desirable biocompatibility, and they retain their antibacterial ability in physiological salt environments. Peptide nanoparticles NPs1 and NPs2 can resist degradation under high concentrations of proteases. In vivo studies illustrate that the toxicity caused by peptide nanoparticles NPs1 and NPs2 is negligible, and these nanoparticles can alleviate systemic bacterial infections in mice and piglets. The membrane permeation mechanism and interference with the cell cycle differ from that of antibiotics and mean that the nanoparticles are at a lower risk of inducing drug resistance. Collectively, these advances may accelerate the development of peptide-based antibacterial nanomaterials and can be applied to the construction of supramolecular nanomaterials.

Antimicrobial peptides/ciprofloxacin-loaded O-carboxymethyl chitosan/self-assembling peptides hydrogel dressing with sustained-release effect for enhanced anti-bacterial infection and wound healing

Bacteria-induced wound infections and multifunctional hydrogels have received widespread attention in wound repair. In this study, self-assembling peptides (SAPs) were grafted on O-carboxymethyl chitosan (O-CMCS), and compact spatial structure and good drug sustained-release effect on mel-d1, a new AMP designed based on melittin with the same antimicrobial activity but lower cytotoxicity and ciprofloxacin (CIP) were obtained. In vivo test showed that the O-CMCS/SAP hydrogel loaded with CIP and mel-d1 accelerated the wound closure speed caused by infection of Escherichia coli and skin tissue regeneration. Both of the enhanced interaction between O-CMCS/SAP and CIP/Mel-d1 because of the hydrophobic interaction and π-π stacking, and the potential tissue healing ability of SAP played important roles. This study provided a rational design method of O-CMCS by grafting SAPs to give a wider range of biological functions.

Synthesis of poly-tetrahydropyrimidine antibacterial polymers and research of their basic properties

Modern medicine has increasingly higher requirements for antibacterial materials. To overcome this challenge, we use alkynyl monomers, amino monomers, formaldehyde, and acetic acid as raw materials to synthesize a series of poly-tetrahydropyrimidine (P-THP) polymers through multicomponent polymerizations (MCPs). P-THP polymers can effectively inhibit the growth of Gram-positive bacteria (Staphylococcus aureus, S. aureus) and Gram-negative bacteria (Escherichia. coli, E. coli), and can prevent bacteria from developing drug resistance within at least 16 generations. Besides, we prepared P-THP antibacterial coatings and explored their antibacterial properties. In vitro antibacterial experiments showed that P-THP coatings can prevent the formation of bacterial biofilms, and the coatings have a lasting killing effect on E. coli and S. aureus. The mouse wound infection experiments proved that P-THP polymers can significantly accelerate skin tissue regeneration and wound healing. Moreover, the P-THP textile obtained by electrospinning also has antibacterial properties and has great application prospects in the field of N95 masks. Generally speaking, P-THP polymers have considerable application potential in the field of treating bacterial infections and promoting wound healing.

Biofilms in Surgical Site Infections: Recent Advances and Novel Prevention and Eradication Strategies

Surgical site infections (SSIs) are common postoperative occurrences due to contamination of the surgical wound or implanted medical devices with community or hospital-acquired microorganisms, as well as other endogenous opportunistic microbes. Despite numerous rules and guidelines applied to prevent these infections, SSI rates are considerably high, constituting a threat to the healthcare system in terms of morbidity, prolonged hospitalization, and death. Approximately 80% of human SSIs, including chronic wound infections, are related to biofilm-forming bacteria. Biofilm-associated SSIs are extremely difficult to treat with conventional antibiotics due to several tolerance mechanisms provided by the multidrug-resistant bacteria, usually arranged as polymicrobial communities. In this review, novel strategies to control, i.e., prevent and eradicate, biofilms in SSIs are presented and discussed, focusing mainly on two attractive approaches: the use of nanotechnology-based composites and natural plant-based products. An overview of new therapeutic agents and strategic approaches to control epidemic multidrug-resistant pathogenic microorganisms, particularly when biofilms are present, is provided alongside other combinatorial approaches as attempts to obtain synergistic effects with conventional antibiotics and restore their efficacy to treat biofilm-mediated SSIs. Some detection and real-time monitoring systems to improve biofilm control strategies and diagnosis of human infections are also discussed.

Antimicrobial peptide-based materials: opportunities and challenges

The multifunctional properties of antimicrobial peptides (AMPs) make them attractive candidates for the treatment of various diseases. AMPs are considered alternatives to antibiotics due to the rising number of multidrug-resistant...

A mini-review on peptide-based self-assemblies and their biological applications

Peptide-based supramolecular self-assembly from peptide monomers into well-organized nanostructures, has attracted extensive attentions towards biomedical and biotechnological applications in recent decades. This spontaneous and reversible assembly process involving non-covalent bonding interactions can be artificially regulated. In this review, we have elaborated different strategies to modulate the peptide self-assembly through tuning the physicochemical and environmental conditions, includingpH, light, temperature, solvent, and enzyme. Detailed introduction of biological applications and future potential of the peptide-based nano-assemblies will also be given.

Unravelling the antimicrobial activity of peptide hydrogel systems: current and future perspectives

The use of hydrogels has garnered significant interest as biomaterial and drug delivery platforms for anti-infective applications. For decades antimicrobial peptides have been heralded as a much needed new class of antimicrobial drugs. Self-assembling peptide hydrogels with inherent antimicrobial ability have recently come to the fore. However, their fundamental antimicrobial properties, selectivity and mechanism of action are relatively undefined. This review attempts to establish a link between antimicrobial efficacy; the self-assembly process; peptide-membrane interactions and mechanical properties by studying several reported peptide systems: β-hairpin/β-loop peptides; multidomain peptides; amphiphilic surfactant-like peptides and ultrashort/low molecular weight peptides. We also explore their role in the formation of amyloid plaques and the potential for an infection etiology in diseases such as Alzheimer's. We look briefly at innovative methods of gel characterization. These may provide useful tools for future studies within this increasingly important field.

Antimicrobial peptides: mechanism of action, activity and clinical potential

The management of bacterial infections is becoming a major clinical challenge due to the rapid evolution of antibiotic resistant bacteria. As an excellent candidate to overcome antibiotic resistance, antimicrobial peptides (AMPs) that are produced from the synthetic and natural sources demonstrate a broad-spectrum antimicrobial activity with the high specificity and low toxicity. These peptides possess distinctive structures and functions by employing sophisticated mechanisms of action. This comprehensive review provides a broad overview of AMPs from the origin, structural characteristics, mechanisms of action, biological activities to clinical applications. We finally discuss the strategies to optimize and develop AMP-based treatment as the potential antimicrobial and anticancer therapeutics.

Single Amino-Acid Based Self-Assembled Biomaterials with Potent Antimicrobial Activity

The design and development of soft biomaterials based on amino acid and short-peptide have gained much attention due to their potent biomedical applications. A slight alteration in the side-chain of single amino acid in a peptide or protein sequence has a huge impact on the structure and function. Phenylalanine is one of the most studied amino acids, which contains an aromatic phenyl group connected through a flexible -CH₂ - unit. In this work, we have examined whether flexibility and aromatic functionality of phenylalanine (Phe) are important in gel formation of model gelator Fmoc-Phe-OH or not. To examine this hypothesis, we synthesized Fmoc-derivatives of three analogues unnatural amino acids including cyclohexylalanine, phenylglycine, and homophenylalanine; which are slightly varied from Phe. Interestingly, all these three new analogues formed hydrogels in phosphate buffer at pH 7.0 having different gelation efficacy and kinetics. This study suggests that the presence of aromatic side-chain and flexibility are not mandatory for the gelation of this model gelator. Newly synthesized unnatural amino acid derivatives have also exhibited promising antimicrobial activity towards gram-positive bacteria by inhibiting cellular oxygen consumption. We further determined the biocompatibility of these amino acid derivatives by using a hemolysis assay on human blood cells. Overall studies described the development of single amino acid-based new injectable biomaterials with improved antimicrobial activity by the slight alteration in the side-chain of amino acid.

Combating Biofilms by a Self-Adapting Drug Loading Hydrogel

A bacterial biofilm is one of the main reasons that many diseases are difficult to cure. Herein, a teicoplanin (TPN)-loaded self-adapting chitosan-based hydrogel (CPH) system, called TPN-CPH, was prepared by encapsulating antibacterial TPN into CPH. This TPN-CPH can effectively combat preformed biofilms in vitro of Staphylococcus aureus (S. aureus). It has a good therapeutic effect on full-thickness cutaneous wounds in vivo of mice infected with biofilms. In addition, TPN-CPH can accelerate wound healing by self-adapting the wound and providing a moist environment. The operation process of TPN-CPH is simple, and no external stimulation such as light and heat is needed in the treatment process, making it more convenient for clinical application. Furthermore, this is a challenge to use self-adapting hydrogels to adapt the micro-size channels of biofilms. TPN-CPH provides a chitosan-based self-adapting hydrogel system for loading drugs to kill bacteria in biofilms, and thus it is promising for infection control.

Nanostructured Antimicrobial Peptides: Crucial Steps of Overcoming the Bottleneck for Clinics

The security issue of human health is faced with dispiriting threats from multidrug-resistant bacteria infections induced by the abuse and misuse of antibiotics. Over decades, the antimicrobial peptides (AMPs) hold great promise as a viable alternative to treatment with antibiotics due to their peculiar antimicrobial mechanisms of action, broad-spectrum antimicrobial activity, lower drug residue, and ease of synthesis and modification. However, they universally express a series of disadvantages that hinder their potential application in the biomedical field (e.g., low bioavailability, poor protease resistance, and high cytotoxicity) and extremely waste the abundant resources of AMP database discovered over the decades. For all these reasons, the nanostructured antimicrobial peptides (Ns-AMPs), based on a variety of nanosystem modification, have made up for the deficiencies and pushed the development of novel AMP-based antimicrobial therapies. In this review, we provide an overview of the advantages of Ns-AMPs in improving therapeutic efficacy and biological stability, reducing side effects, and gaining the effect of organic targeting and drug controlled release. Then the different material categories of Ns-AMPs are described, including inorganic material nanosystems containing AMPs, organic material nanosystems containing AMPs, and self-assembled AMPs. Additionally, this review focuses on the Ns-AMPs for the effect of biological activities, with emphasis on antimicrobial activity, biosecurity, and biological stability. The "state-of-the-art" antimicrobial modes of Ns-AMPs, including controlled release of AMPs under a specific environment or intrinsic antimicrobial properties of Ns-AMPs, are also explicated. Finally, the perspectives and conclusions of the current research in this field are also summarized.

Novel Broad-Spectrum Antimicrobial Peptide Derived from Anoplin and Its Activity on Bacterial Pneumonia in Mice

The emergence of multidrug-resistant bacteria has major issues for treating bacterial pneumonia. Currently, anoplin (GLLKRIKTLL-NH₂) is a natural antimicrobial candidate derived from wasp venom. In this study, a series of new antimicrobial peptide (AMP) anoplin analogues were designed and synthesized. The relationship between their biological activities and their positive charge, hydrophobicity, amphipathicity, and secondary structure are described. The characteristic shared by these peptides is that positively charged amino acids and hydrophobic amino acids are severally arranged on the hydrophilic and hydrophobic surface of the α-helix to form a completely amphiphilic structure. To achieve ideal AMPs, below the range of the threshold of the cytotoxicity and hemolytic activity, their charges and hydrophobicity were increased as much. Among the new analogues, A-21 (KWWKKWKKWW-NH₂) exhibited the greatest antimicrobial activity (geometric mean of minimum inhibitory concentrations = 4.76 μM) against all the tested bacterial strains, high bacterial cell selectivity in vitro, high effectiveness against bacterial pneumonia in mice infected with Klebsiella pneumoniae, and low toxicity in mice (LD₅₀ = 82.01 mg/kg). A-21 exhibited a potent bacterial membrane-damaging mechanism and lipopolysaccharide-binding ability. These data provide evidence that A-21 is a promising antimicrobial candidate for the treatment of bacterial pneumonia.

Assembly of cationic and amphiphilic β-sheet FKF tripeptide confers antibacterial activity

The race drawn against bacteria facing the evolution of antimicrobial resistance fuels research for new drugs and therapeutic strategies. FKF, a tripeptide that is cationic and amphiphilic was examined in light of its potential antimicrobial activity. Acid titration of purified peptide solution, 6% w/v (136 mM), yielded a hydrogel at pH~ 4. Cryo-TEM images of FKF revealed distinct phases formed upon increase in pH, ranging from elongated needles, uniform width fibers, sheets and tubular structures. ¹H NMR attested FKF charged states as function of pH, and CD and FTIR measurements indicated that FKF β-sheet assemblies are held by both π-π stacking and H-bonds. FKF hydrogel displayed bactericidal activity against E. coli and P. aeruginosa with a 3-log reduction in bacterial counts. The hydrogel was also found effective in reducing P. aeruginosa contamination in a skin lesion model in rats. FKF forms a unique antimicrobial peptide-hydrogel, showing neglectable effect in dissolved state, yet only when fibrillary assembled it gains functionality. STATEMENT OF SIGNIFICANCE: Ultra-short peptides are at the frontier of peptide self-assembly research. The tripeptide FKF assumes distinct assembly forms that are a function of pH, for which we have pinpointed the accompanying changes in charge. Made of natural amino acids, FKF forms a pure peptide hydrogel phase, which is intrinsically antimicrobial. We demonstrate that antimicrobial effect is only assumed by the peptide assemblies, posing self-assembly as a pre-requisite for FKF's bactericidal effect. This system provides evidence for the link between specific microscopic peptide assembled structures, macroscopic gel formation and antimicrobial effect, utilized to alleviate bacterial contamination in vivo.

Functionalized Peptide Fibrils as a Scaffold for Active Substances in Wound Healing

Technological developments in the field of biologically active peptide applications in medicine have increased the need for new methods for peptide delivery. The disadvantage of peptides as drugs is their low biological stability. Recently, great attention has been paid to self-assembling peptides that can form fibrils. Such a formulation makes bioactive peptides more resistant to enzymatic degradation and druggable. Peptide fibrils can be carriers for peptides with interesting biological activities. These features open up prospects for using the peptide fibrils as long-acting drugs and are a valid alternative to conventional peptidic therapies. In our study, we designed new peptide scaffolds that are a hybrid of three interconnected amino acid sequences and are: pro-regenerative, cleavable by neutrophilic elastase, and fibril-forming. We intended to obtain peptides that are stable in the wound environment and that, when applied, would release a biologically active sequence. Our studies showed that the designed hybrid peptides show a high tendency toward regular fibril formation and are able to release the pro-regenerative sequence. Cytotoxicity studies showed that all the designed peptides were safe, did not cause cytotoxic effects and revealed a pro-regenerative potential in human fibroblast and keratinocyte cell lines. In vivo experiments in a dorsal skin injury model in mice indicated that two tested peptides moderately promote tissue repair in their free form. Our research proves that peptide fibrils can be a druggable form and a scaffold for active peptides.

Enhancing Antimicrobial Peptide Potency through Multivalent Presentation on Coiled-Coil Nanofibrils

Antibiotic-resistant microbes have become a global health threat. New delivery systems that enhance the efficacy of antibiotics and/or overcome the resistances can help combat them. In this context, we present FF03, a fibril-forming α-helical coiled-coil peptide that functions as an efficient scaffold for the multivalent presentation of the weakly cationic antimicrobial peptide (AMP) IN4. The resulting IN4-decorated FF03 coiled-coil fibrils (FF03 + IN4) are nonhemolytic and noncytotoxic and show enhanced antimicrobial activity relative to unconjugated IN4 and standard antibiotics against several bacterial strains. Scanning electron microscopy analysis shows that FF03 + IN4 nanofibers disrupt methicillin-resistant Staphylococcus aureus membranes, indicating a surface-level mode of action. Furthermore, transmission electron microscopy and circular dichroism studies indicate that decoration of the FF03 scaffold with IN4 does not alter the secondary-structure propensity or fibril-forming properties of FF03. Thus, the approach reported herein provides a new peptidic scaffold for the multivalent presentation of AMPs to obtain nonhemolytic and noncytotoxic antimicrobial systems with improved efficacy relative to the unconjugated AMP analogues.

Engineering the drug carrier biointerface to overcome biological barriers to drug delivery

Micro and nanoscale drug carriers must navigate through a plethora of dynamic biological systems prior to reaching their tissue or disease targets. The biological obstacles to drug delivery come in many forms and include tissue barriers, mucus and bacterial biofilm hydrogels, the immune system, and cellular uptake and intracellular trafficking. The biointerface of drug carriers influences how these carriers navigate and overcome biological barriers for successful drug delivery. In this review, we examine how key material design parameters lead to dynamic biointerfaces and improved drug delivery across biological barriers. We provide a brief overview of approaches used to engineer key physicochemical properties of drug carriers, such as morphology, surface chemistry, and topography, as well as the development of dynamic responsive materials for barrier navigation. We then discuss essential biological barriers and how biointerface engineering can enable drug carriers to better navigate and overcome these barriers to drug delivery.

Low molecular weight self-assembling peptide-based materials for cell culture, antimicrobial, anti-inflammatory, wound healing, anticancer, drug delivery, bioimaging and 3D bioprinting applications

In this review, we have focused on the design and development of low molecular weight self-assembling peptide-based materials for various applications including cell proliferation, tissue engineering, antibacterial, antifungal, anti-inflammatory, anticancer, wound healing, drug delivery, bioimaging and 3D bioprinting. The first part of the review describes about stimuli and various noncovalent interactions, which are the key components of various self-assembly processes for the construction of organized structures. Subsequently, the chemical functionalization of the peptides has been discussed, which is required for the designing of self-assembling peptide-based soft materials. Various low molecular weight self-assembling peptides have been discussed to explain the important structural features for the construction of defined functional nanostructures. Finally, we have discussed various examples of low molecular weight self-assembling peptide-based materials for cell culture, antimicrobial, anti-inflammatory, anticancer, wound healing, drug delivery, bioimaging and 3D bioprinting applications.

Accessing Highly Tunable Nanostructured Hydrogels in a Short Ionic Complementary Peptide Sequence via pH Trigger

Creating diverse nanostructures from a single gelator through modulating the self-assembly pathway has been gaining much attention in recent years. To this direction, we are exploring the effect of modulation of pH as a potential self-assembly pathway in governing the physicochemical properties of the final gel phase material. In this context, we used a classical nongelator with the ionic complementary sequence FEFK, which was rationally conjugated to an aromatic group naphthoxyacetic acid (Nap) at the N-terminal end to tune its gelation behavior. Interestingly, the presence of oppositely charged amino acids in the peptide amphiphile resulted in pH-responsive behavior, leading to the formation of hydrogels over a wide pH range (2.0-12.0); however, their structures differ significantly at the nanoscale. Thus, by simply manipulating the overall charge over the exposed surface of the peptide amphiphiles as a function of pH, we were able to access diverse self-assembled nanostructures within a single gelator domain. The charged state of the gelator at the extreme pH (2.0, 12.0) led to a thinner fiber formation, in contrast to the thicker fibers observed near the physiological pH owing to charge neutralization, thus promoting the lateral association. Such variation in molecular packing was found to be further reflected in the variable mechanical strengths of the peptide hydrogels obtained at different pH values. Moreover, the gelation of the peptide at physiological pH offers an additional advantage to explore this hydrogel as a cell culture scaffold. We anticipate that our study on controlling the self-assembly pathway of the ionic complementary peptide amphiphile can be an elegant approach to access diverse self-assembled materials, which can expand the zone of its applicability as a stimuli-responsive biomaterial.

Surface Modification by Nano-Structures Reduces Viable Bacterial Biofilm in Aerobic and Anaerobic Environments

Bacterial biofilm formation on wet surfaces represents a significant problem in medicine and environmental sciences. One of the strategies to prevent or eliminate surface adhesion of organisms is surface modification and coating. However, the current coating technologies possess several drawbacks, including limited durability, low biocompatibility and high cost. Here, we present a simple antibacterial modification of titanium, mica and glass surfaces using self-assembling nano-structures. We have designed two different nano-structure coatings composed of fluorinated phenylalanine via the drop-cast coating technique. We investigated and characterized the modified surfaces by scanning electron microscopy, X-ray diffraction and wettability analyses. Exploiting the antimicrobial property of the nano-structures, we successfully hindered the viability of Streptococcus mutans and Enterococcus faecalis on the coated surfaces in both aerobic and anaerobic conditions. Notably, we found lower bacteria adherence to the coated surfaces and a reduction of 86–99% in the total metabolic activity of the bacteria. Our results emphasize the interplay between self-assembly and antimicrobial activity of small self-assembling molecules, thus highlighting a new approach of biofilm control for implementation in biomedicine and other fields.

Effect of N-methylated and fatty acid conjugation on analogs of antimicrobial peptide Anoplin

With the increment of drug-resistant bacteria and the slow development of novel antibiotics, antimicrobial peptides have gained increasing attention as a potential antibiotic alternative. They not only displayed a broad-spectrum antimicrobial activity but also were difficult to induce resistance development because of their unique membrane-lytic activity. Herein, to improve the limitations of Anoplin, the N-methyl amino acids were first used to replace the amino acids of Anoplin at sensitive enzymatic cleave sites (Leu, Ile, Lys and Arg). Afterward, the N-methylated analogs M3.6/M4.7/M5.7 with high stability were screened out and further modified by N-terminal fatty acid conjugation to develop new antimicrobial peptide analogs with both potent antimicrobial activity and high proteolytic stability, and 12 new Anoplin analogs Cn-M3.6/M4.7/M5.7 (n = 8,10,12,14) were designed and synthesized. Our results showed that compared with native Anoplin, the stability of these N-methylated lipopeptides against trypsin and chymotrypsin degradation were increased by 10⁴-10⁶ times. Besides, they still possessed potent antimicrobial activity under physiological salts and serum environment. Among them, the new designed analogs C12-M3.6/M4.7/M5.7 showed the optimal antimicrobial activity, synergy and additive effects were also observed when they were combined with traditional antibiotics polymyxin B, rifampin, and kanamycin. Moreover, they could effectively inhibit the formation of biofilms by P. aeruginosa and S. aureus. The antimicrobial mechanism studied revealed that these N-methylated lipopeptides could display a rapid bactericidal effect by destroying the bacterial cell membrane. Notably, no detectable resistance of these new designed peptides was developed after continuous cultured with E. coli for 20 passages. In summary, we have designed a new class of antimicrobial peptide analogs with potent antimicrobial activity and high proteolytic stability through N-methyl amino acids substitution and N-terminal fatty acid conjugation. This study also provides new ideas and methods for the modification of antimicrobial peptides in the future.

Nanostructured antimicrobial peptides: The last push towards clinics

Peptide drugs hold great potential for the treatment of infectious diseases due to their unconventional mechanisms of action, biocompatibility, biodegradability and ease of synthesis and modification. The increasing rising of bacterial strains resistant to classical antibiotics have pushed the development of new peptide-based antimicrobial therapies. In this context, over the past few years, different approaches have reached a clinical approval. Furthermore, the application of nanotechnological principles to the design of antimicrobial peptide-based composites increases even more the already known benefits of antimicrobial peptides as competent protein drugs. Then, we provide here an overview of the current strategies for antimicrobial peptide discovery and modification and the status of such peptides already under clinical development. In addition, we summarize the innovative formulation strategies for their application, focusing on the controlled self-assembly for the fabrication of antimicrobial nanostructures without the assistance of external nanocarriers, and with emphasis on bioengineering, design of ultra-short peptides and rising insights in bacterial selectivity.

Supramolecular Peptide Assemblies as Antimicrobial Scaffolds

Antimicrobial discovery in the age of antibiotic resistance has demanded the prioritization of non-conventional therapies that act on new targets or employ novel mechanisms. Among these, supramolecular antimicrobial peptide assemblies have emerged as attractive therapeutic platforms, operating as both the bactericidal agent and delivery vector for combinatorial antibiotics. Leveraging their programmable inter- and intra-molecular interactions, peptides can be engineered to form higher ordered monolithic or co-assembled structures, including nano-fibers, -nets, and -tubes, where their unique bifunctionalities often emerge from the supramolecular state. Further advancements have included the formation of macroscopic hydrogels that act as bioresponsive, bactericidal materials. This systematic review covers recent advances in the development of supramolecular antimicrobial peptide technologies and discusses their potential impact on future drug discovery efforts.

Pharmaceutical Formulation and Characterization of Dipeptide Nanotubes for Drug Delivery Applications

Peptide nanotubes are promising materials for a variety of biomedical applications with ultrashort (≤7 amino acids) forms providing particular promise for clinical translation. The manufacture of peptide nanotubes has, however, been associated with toxic organic solvents restricting clinical use. The purpose of this work is to formulate dipeptide nanotubes using mild techniques easily translated to industrial upscale and to characterize their physiochemical and biological properties. Phenylalanine-phenylalanine variants can be successfully formulated using distilled water as demonstrated here. Formulations are homogenous in shape (tubular), with apparent size (50-260 nm) and a zeta potential of up to +30 mV. L-(H₂ N-FF-COOH), and D-enantiomers (H₂ N-ff-COOH) demonstrate no toxicity against glioblastoma cells and are explored for ability to deliver a model hydrophilic molecule, sodium fluorescein, at pH 5.5 (tumor) and 7.4 (physiological). Peptide nanotubes loaded with >85% sodium fluorescein, demonstrate burst release characteristics, fitting the Weibull model of drug release. This research provides important data contributing to the pharmaceutical formulation of peptide nanotubes as drug delivery platforms for hydrophilic drugs.