Three-dimensional, biomimetic electrospun scaffolds reinforced with carbon nanotubes for temporomandibular joint disc regeneration

Electrospun PAN/PANI/CNT scaffolds and electrical pulses: a pathway to stem cell-derived nerve regeneration

Biocompatible polymer-based scaffolds hold great promise for neural repair, especially when they are coupled with electrostimulation to induce neural differentiation. In this study, a combination of polyacrylonitrile/polyaniline (PAN/PANI) and Carbon Nanotubes (CNTs) were used to fabricate three different biomimetic electrospun scaffolds (samples 1, 2 and 3 containing 0.26 wt%, 1 wt% and 2 wt% of CNTs, respectively). These scaffolds underwent thorough characterization for assessing electroconductivity, tensile strength, wettability, degradability, swelling, XRD, and FTIR data. Notably, scanning electron microscopy (SEM) images revealed a three-dimensional scaffold morphology with aligned fibers ranging from 60 nm to 292 nm in diameter. To comprehensively investigate the impact of electrical stimulation on the nervous differentiation of the stem cells seeded on these scaffolds, cell morphology and adhesion were assessed based on SEM images. Additionally, scaffold biocompatibility was studied through MTT assay. Importantly, Real-Time PCR results indicated the expression of neural markers-Nestin,β-tubulin III, and MAP2-by the cells cultured on these samples. In comparison with the control group, samples 1 and 2 exhibited significant increases in Nestin marker expression, indicating early stages of neuronal differentiation, whileβ-tubulin III expression was significantly reduced and MAP2 expression remained statistically unchanged. In contrast, sample 3 did not display a statistically significant upturn in Nestin maker expression, while showcasing remarkable increases in the expression of both MAP2 andβ-tubulin III, as markers of the end stages of differentiation, leading to postmitotic neurons. These results could be attributed to the higher electroconductivity of S3 compared to other samples. Our findings highlight the biomimetic potential of the prepared scaffolds for neural repair, illustrating their effectiveness in guiding stem cell differentiation toward a neural lineage.

A Janus, robust, biodegradable bacterial cellulose/Ti3C2Tx MXene bilayer membranes for guided bone regeneration

Guided bone regeneration (GBR) stands as an essential modality for craniomaxillofacial bone defect repair, yet challenges like mechanical weakness, inappropriate degradability, limited bioactivity, and intricate manufacturing of GBR membranes hindered the clinical efficacy. Herein, we developed a Janus bacterial cellulose(BC)/MXene membrane through a facile vacuum filtration and etching strategy. This Janus membrane displayed an asymmetric bilayer structure with interfacial compatibility, where the dense layer impeded cell invasion and the porous layer maintained stable space for osteogenesis. Incorporating BC with Ti3C2Tx MXene significantly enhanced the mechanical robustness and flexibility of the material, enabling clinical operability and lasting GBR membrane supports. It also contributed to a suitable biodegradation rate, which aligned with the long-term bone repair period. After demonstrating the desirable biocompatibility, barrier role, and osteogenic capability in vitro, the membrane's regenerative potential was also confirmed in a rat cranial defect model. The excellent bone repair performance could be attributed to the osteogenic capability of MXene nanosheets, the morphological cues of the porous layer, as well as the long-lasting, stable regeneration space provided by the GBR membrane. Thus, our work presented a facile, robust, long-lasting, and biodegradable BC/MXene GBR membrane, offering a practical solution to craniomaxillofacial bone defect repair.

Specific tissue engineering for temporomandibular joint disc perforation

BACKGROUND

The temporomandibular joint (TMJ) disc is a critical fibrocartilaginous structure with limited regenerative capacity in the oral system. Perforation of the TMJ disc can lead to osteoarthritis and ankylosis of the TMJ because of the lack of disc protection. Clinical treatments for TMJ disc perforation, such as discectomy, hyaluronic acid injection, endoscopic surgery and high position arthroplasty of TMJ, are questionable with regard to long-term outcomes, and only three fourths of TMJ disc perforations are repairable by surgery, even in the short-term. Tissue engineering offers the potential for cure of repairable TMJ disc perforations and regeneration of unrepairable ones.

OBJECTIVES

This review discusses the classification of TMJ disc perforation and defines typical TMJ disc perforation. Advancements in the engineering-based repair of TMJ disc perforation by stem cell therapy, construction of a disc-like scaffold and functionalization by offering bioactive stimuli are also summarized in the review, and the barriers developing engineering technologies need to overcome to be popularized are discussed.

Additive manufacturing of poly (lactic acid)/hydroxyapatite/carbon nanotubes biocomposites for fibroblast cell proliferation

Bone tissue is one of the most important in the human body. In this study, scaffolds of poly (lactic acid) PLA reinforced with hydroxyapatite (HA) and carbon nanotubes (CNT) were manufactured, evaluating their mechanical and biological properties. HA was synthesized by wet method and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The scaffolds were produced using additive manufacturing and characterized by optical microscopy, SEM, thermogravimetric analysis (TGA), Raman spectroscopy and biological tests. The SEM results showed that the PLA surface was affected by the incorporation of CNT. TG showed that the incorporation of HA into the polymer matrix compromised the thermal stability of PLA. On the other hand, the incorporation of CNT to the polymer and the impregnation with HA on the surface by thermal effect increased the stability of PLA/CNT scaffolds. Raman spectra indicated that HA impregnation on the surface did not modify the polymer or the ceramic. In the compression tests, PLA and PLA/CNT scaffolds displayed the best compressive strength. In the biological tests, more than 85% of the cells remained viable after 48 h of incubation with all tested scaffolds and groups with CNT in the composition disclosing the best results.

Nanomaterial-Based Scaffolds for Tissue Engineering Applications: A Review on Graphene, Carbon Nanotubes and Nanocellulose

Nanoscale biomaterials have garnered immense interest in the scientific community in the recent decade. This review specifically focuses on the application of three nanomaterials, i.e., graphene and its derivatives (graphene oxide, reduced graphene oxide), carbon nanotubes (CNTs) and nanocellulose (cellulose nanocrystals or CNCs and cellulose nanofibers or CNFs), in regenerating different types of tissues, including skin, cartilage, nerve, muscle and bone. Their excellent inherent (and tunable) physical, chemical, mechanical, electrical, thermal and optical properties make them suitable for a wide range of biomedical applications, including but not limited to diagnostics, therapeutics, biosensing, bioimaging, drug and gene delivery, tissue engineering and regenerative medicine. A state-of-the-art literature review of composite tissue scaffolds fabricated using these nanomaterials is provided, including the unique physicochemical properties and mechanisms that induce cell adhesion, growth, and differentiation into specific tissues. In addition, in vitro and in vivo cytotoxic effects and biodegradation behavior of these nanomaterials are presented. We also discuss challenges and gaps that still exist and need to be addressed in future research before clinical translation of these promising nanomaterials can be realized in a safe, efficacious, and economical manner.

Decellularized-disc based allograft and xenograft prosthesis for the long-term precise reconstruction of temporomandibular joint disc

Currently, no effective disc reconstruction treatment strategy is clinically available for temporomandibular joint (TMJ) disc-related diseases. To address this, we developed a prosthesis construct with laser-drilled decellularized natural disc reinforced by polycaprolactone, which mimics the natural morphology, and structural, biomechanical and biological property of the TMJ disc. The construct demonstrated good biocompatibility, safety and immunological tolerance both in vitro, and in a rat subcutaneous model. During 6 months implantation in an allogeneic rabbit TMJ disc reconstruction model, the disc prosthesis maintained its integrity, collagen fiber-orientation, mechanical property, joint structural stability and prevented articular cartilage and bone from damage. Furthermore, the "upgraded" disc prosthesis obtained from decellularized porcine disc was implanted into a goat TMJ disc reconstruction model. The xenograft prosthesis, with strength and viscoelasticity similar to a natural TMJ disc, was able to restore the structure and function of TMJ up to 20 weeks. These results demonstrate the translational feasibility of an allogeneic or xenogeneic decellularized disc prosthesis for treatment of advanced TMJ disc-related diseases. STATEMENT OF SIGNIFICANCE: This study makes a significant contribution to TMJ disc disease treatment both in theory and in clinics, because: (1) it provided an innovative approach to prepare an artificial TMJ disc with decent mechanical properties and long-term condyle-protecting effect; (2) it specified an advanced decellularized method for fibrocartilage decellularization and xenograft application; (3) it developed a facile and reproducible TMJ disc reconstruction model not only for middle size animal but also for large animal study; (4) the comprehensive and unreported biomechanical tests on the natural TMJ discs would act as a valuable reference for further research in the field of artificial TMJ disc materials or TMJ disc tissue engineering; (5) it suggested a potential treatment for patients with severe TMJ diseases that were commonly met but difficult to treat in clinics.

Stiffness-tuned and ROS-sensitive hydrogel incorporating complement C5a receptor antagonist modulates antibacterial activity of macrophages for periodontitis treatment

Periodontitis is admittedly a microbe-driven intractable infectious disease, in which Porphyromonas gingivalis (Pg) plays a keystone role. Pg can selectively impair the antimicrobial responses of periodontal resident macrophages including their phagocytic and bactericidal activity without interfering their proinflammatory activity, which leads to microflora disturbance, destructive periodontal inflammation and alveolar bone loss eventually. Here, an injectable ROS-sensitive hydrogel is developed for releasing active bone marrow-derived macrophages (named ex-situ macrophages hereafter) and a complement C5a receptor antagonist (C5A) to the gingival crevice. Through appropriately tuning the hydrogel stiffness, the phagocytic activity of these macrophages is greatly enhanced, reaching an optimal performance at the elastic modulus of 106 kPa. Meanwhile, C5A avoids undesired C5a receptor activation by Pg to ensure the bacterial killing activity of both the ex-situ and in-situ macrophages. Besides, the ROS-sensitive hydrogels show another distinct feature of decreasing the ROS level in periodontal niche, which contributes to the alleviated periodontal inflammation and attenuated bone loss as well. This study highlights the potential of utilizing hydrogels with tailored biomechanical properties to remodel the functions of therapeutic cells, which is expected to find wide applications even beyond periodontitis treatment.

A CS-based composite scaffold with excellent photothermal effect and its application in full-thickness skin wound healing

The development of natural polymer-based scaffolds with excellent biocompatibility, antibacterial activity, and blood compatibility, able to facilitate full-thickness skin wound healing, remains challenging. In this study, we have developed three chitosan (CS)-based porous scaffolds, including CS, CS/CNT (carbon nanotubes) and CS/CNT/HA (nano-hydroxyapatite, n-HA) using a freeze-drying method. All three scaffolds have a high swelling ratio, excellent antibacterial activity, outstanding cytocompatibility and blood compatibility in vitro. The introduction of CNTs exhibited an obvious increase in mechanical properties and exerts excellent photothermal response, which displays excellent healing performance as a wound dressing in mouse full-thickness skin wound model when compared to CS scaffolds. CS/CNT/HA composite scaffolds present the strongest ability to promote full-thickness cutaneous wound closure and skin regeneration, which might be ascribed to the synergistic effect of photothermal response from CNT and excellent bioactivity from n-HA. Overall, the present study indicated that CNT and n-HA can be engineered as effective constituents in wound dressings to facilitate full-thickness skin regeneration.

Design of 3D polycaprolactone/ε-polylysine-modified chitosan fibrous scaffolds with incorporation of bioactive factors for accelerating wound healing

Electrospun nanofibrous scaffolds show great application potentials for wound healing owing to their effective simulation of extracellular matrix (ECM). Three-dimensional (3D) nanofibrous dressings exhibit relatively high specific surface areas, better mimicry of native ECM, adjustable hydrophilicity and breathability, good histocompatibility, enhanced wound healing, and reduced inflammation. In the present work, we designed the 3D polycaprolactone/ε-polylysine modified chitosan (PCL/PCS) nanofibrous scaffolds by an electrospinning and gas foaming process. Then, gelatin and heparin (Gel/Hep) were assembled onto the surface of PCL/PCS nanofibers by electrostatic adsorption, and vascular endothelial growth factors (VEGFs) were also synchronously incorporated into Gel/Hep layer to form a multifunctional 3D nanofibrous scaffold (PCL/PCS@Gel/Hep+VEGF) for accelerating wound healing. The as-fabricated 3D PCL/PCS@GEL/Hep+VEGF nanofibrous scaffold showed excellent antibacterial ability, hemocompatibility and biocompatibility in vitro and wound healing ability in vivo. Immunological analysis showed that the as-fabricated nanofibrous scaffold inhibited inflammation at the wound sites while promoting angiogenesis during the wound healing process. STATEMENT OF SIGNIFICANCE: The electrospun 3D fibrous scaffolds using polycaprolactone/ε-polylysine modified chitosan (PCL/PCS) have been fabricated as backbone for mimicking the extracellular matrix (ECM). Gelatin and heparin (Gel/Hep) were wrapped onto the surface of PCL/PCS fibers by electrostatic adsorption and vascular endothelial growth factors (VEGFs) were also synchronously incorporated into surface Gel/Hep layer to form multifunctional 3D fibrous scaffolds. The as-fabricated multifunctional 3D fibrous scaffolds with good antibacterial ability and biocompatibility have been used as dressings for accelerating wound healing by inhibiting inflammation at the wound sites while promoting angiogenesis during the wound healing process.