Antibacterial effect of 3D printed mesoporous bioactive glass scaffolds doped with metallic silver nanoparticles

Assessment of Silver-Copper Co-Loaded Mesoporous Bioactive Glass as an Advanced Pulp-Capping Material

OBJECTIVES

To evaluate the multifunctionality of silver-copper co-loaded mesoporous bioactive glass (MBG), with the goal of developing an advanced pulp-capping material.

METHODS

The synthesis of materials was conducted using the sol-gel method, following the approach described in previous studies but with some modifications. The composition included 80 mol% SiO₂, 15 mol% CaO, and 5 mol% P₂O₅, with additional components of 5 mol% silver, 5 mol% copper, or 1 mol% silver combined with 4 mol% copper, designated as Ag5/80S, Cu5/80S, or Ag1Cu4/80S, respectively. Furthermore, crystal phases, surface morphology, and ion-releasing activity were analyzed using X-ray diffraction (XRD), transmission electron microscopy (TEM), and inductively coupled plasma mass spectrometry (ICP-MS), respectively. Human umbilical vein endothelial cells (HUVECs) were employed to assess wound-healing effects, while human dental pulp stem cells (hDPSCs) were utilized to evaluate osteogenic effects.

RESULTS

Textural analyses indicated that Ag1Cu4/80S was successfully synthesized using modified procedures, demonstrating comparable ion co-releasing activity. Ag1Cu4/80S exhibited low toxicity and high cell proliferation rates, with a migration rate of 46%, significantly higher than the <10% observed in other groups. In terms of osteogenesis, hDPSCs treated with Ag1Cu4/80S displayed enhanced alkaline phosphatase activity, with mineralization levels 1.6-fold greater than those of untreated controls.

CONCLUSION

The synthesis of Ag1Cu4/80S was successfully optimized. This material demonstrated significant wound-healing and comparable osteogenic effects relative to other tested materials, highlighting its potential for dental applications.

CLINICAL RELEVANCE

Ag₁Cu₄/80S demonstrated a comparable effect on osteogenesis, indicating its potential to promote mineralization and suggesting its applicability in dental treatments.

Visible Light-Sensitive Sustainable Quantum Dot Crystals of Co/Mg Doped Natural Hydroxyapatite Possessing Antimicrobial Activity and Biocompatibility

Cutting-edge research in advanced materials is increasingly turning toward the development of novel multifunctional nanomaterials for use in high-tech applications. This research uses the solid-state method as a solvent-free technique to create multifunctional quantum dot (QD) hydroxyapatite (HA) crystals from bovine bone waste. By incorporating cobalt (Co) and magnesium (Mg) into the HA structure, the crystallinity of the hexagonal HA nanoparticles (99.7%), showing QD crystals is enhanced. Oxygen vacancies on the surfaces of the HA nanoparticles contributed to their bandgap falling within the visible light range. In addition, the dopants substituted calcium in the HA crystal structure and generated a divalent oxidation state, shifting the bandgap of natural HA toward red wavelengths (3.26 to 1.94 eV). Moreover, the incorporation of Co led to magnetization within the HA structure through spin polarization. Additionally, the doped QD crystals of HA nanoparticles showed significant antimicrobial activity against Escherichia coli, Staphylococcus aureus, and bacteriophages MS2, particularly under visible light exposure. In short, the Co/Mg co-doped HA nanoparticles exhibited ferromagnetic properties, sensitivity to visible light, biocompatibility, and considerable antimicrobial effects, establishing their potential as sustainable multifunctional materials for biomedical applications, especially in anti-infection treatments.

Multifunctional SEBS/AgNWs Nanocomposite Films with Antimicrobial, Antioxidant, and Anti-Inflammatory Properties Promote Infected Wound Healing

Wound healing is a complex biological process that can trigger inflammation and oxidative stress and impair myofibrillogenesis and angiogenesis. Several advanced wound-dressing nanocomposite materials have been designed to address these issues. Here, we designed a new multifunctional styrene-ethylene-butylene-styrene/silver nanowire (SEBS/AgNWs)-based nanocomposite film with antimicrobial, antioxidant, and anti-inflammatory properties to promote wound healing. The porous morphological structure of SEBS/AgNWs enhances their antimicrobial, antioxidant, and anti-inflammatory properties. SEBS/AgNWs significantly inhibited the growth of Staphylococcus aureus, methicillin-resistant Staphylococcus aureus, and Escherichia coli strains, effectively wiping out ABTS•+, DPPH•, hydrogen peroxide (H2O2), and hydroxyl (•OH) radicals, showing their effective ROS-scavenging properties. It further showed significant antioxidant properties by increasing the levels of enzyme-like catalase (CAT), superoxide dismutase (SOD), and glutathione (GSH), while decreasing malonaldehyde (MDA) levels. Additionally, SEBS/AgNWs reduced the expression of interleukin-1β (IL-1β), IL-6, and tumor necrosis factor-α (TNF-α), while increasing levels of transforming growth factor- β (TGF-β), vascular endothelial growth factor-A (VEGF), and CD31 in wound healing. This suggests that applying a multifunctional nanoplatform based on SEBS/AgNWs could enhance wound healing and improve patient outcomes in wound care management.

Personalized bioceramic grafts for craniomaxillofacial bone regeneration

The reconstruction of craniomaxillofacial bone defects remains clinically challenging. To date, autogenous grafts are considered the gold standard but present critical drawbacks. These shortcomings have driven recent research on craniomaxillofacial bone reconstruction to focus on synthetic grafts with distinct materials and fabrication techniques. Among the various fabrication methods, additive manufacturing (AM) has shown significant clinical potential. AM technologies build three-dimensional (3D) objects with personalized geometry customizable from a computer-aided design. These layer-by-layer 3D biomaterial structures can support bone formation by guiding cell migration/proliferation, osteogenesis, and angiogenesis. Additionally, these structures can be engineered to degrade concomitantly with the new bone tissue formation, making them ideal as synthetic grafts. This review delves into the key advances of bioceramic grafts/scaffolds obtained by 3D printing for personalized craniomaxillofacial bone reconstruction. In this regard, clinically relevant topics such as ceramic-based biomaterials, graft/scaffold characteristics (macro/micro-features), material extrusion-based 3D printing, and the step-by-step workflow to engineer personalized bioceramic grafts are discussed. Importantly, in vitro models are highlighted in conjunction with a thorough examination of the signaling pathways reported when investigating these bioceramics and their effect on cellular response/behavior. Lastly, we summarize the clinical potential and translation opportunities of personalized bioceramics for craniomaxillofacial bone regeneration.

A LDH-Derived Metal Sulfide Nanosheet-Functionalized Bioactive Glass Scaffold for Vascularized Osteogenesis and Periprosthetic Infection Prevention/Treatment

Periprosthetic infection and prosthetic loosing stand out as prevalent yet formidable complications following orthopedic implant surgeries. Synchronously addressing the two complications is long-time challenging. Herein, a bioactive glass scaffold (BGS) functionalized with MgCuFe-layered double hydroxide (LDH)-derived sulfide nanosheets (BGS/MCFS) is developed for vascularized osteogenesis and periprosthetic infection prevention/treatment. Apart from the antibacterial cations inhibiting bacterial energy and material metabolism, the exceptional near-infrared-II (NIR-II) photothermal performance empowers BGS/MCFS to eliminate periprosthetic infections, outperforming previously reported functionalized BGS. The rough surface topography and the presence of multi-bioactive metal ions bestow BGS/MCFS with exceptional osteogenic and angiogenic properties, with 8.5-fold and 2.3-fold enhancement in bone mass and neovascularization compared with BGS. Transcriptome sequencing highlights the involvement of the TGF-β signaling pathway in these processes, while single-cell sequencing reveals a significant increase in osteoblasts and endothelial cells around BGS/MCFS compared to BGS.

Developing a novel glass ionomer cement with enhanced mechanical and chemical properties

OBJECTIVE

To develop a novel glass ionomer cement (NGIC) with enhanced mechanical and chemical properties and assess its biocompatibility, mechanical strength, and ion release.

METHODS

Nanosilver doped bioactive glass (NanoAg BAG) was synthesized by sol-gel method and characterized by scanning electron microscopy with energy-dispersive X-ray spectroscopy and transmission electron microscopy. The NanoAg BAG, together with poly(vinylphosphonic acid) (PVPA), alumino-fluorosilicate glass and poly-acrylic acid were used to synthesize NGIC. The optimal PVPA concentration for NGIC was determined by PVPA modified GIC's biocompatibility and mechanical properties and used to prepare NGIC specimens. NGIC specimens with NanoAg BAG at 0%, 1%, 2%, and 5% were allocated into Groups NGIC0, NGIC1, NGIC2, and NGIC5, respectively. The biocompatibility, surface morphology, elemental composition, surface topography, chemical properties, compressive strength, diametral tensile strength, and ion release of the NGIC were assessed. A conventional glass ionomer cement (GIC) was used as a control.

RESULTS

A granular BAG with nano silver particles attached on its surface were found, indicating the successful synthesis of NanoAg BAG. PVPA at 10% presented the best effect in enhancing the biocompatibility and mechanical properties of PVPA modified GIC and was used to prepare NGIC specimens. NGIC1 showed similar biocompatibility, surface morphology and topography to GIC. Chemical properties results showed that NGICs showed the same adsorption peaks to GIC. The compressive strength (mean±SD in MPa) was 168.1 ± 29.7, 205.5 ± 29.5, 221.8 ± 46.8, 216.6 ± 59.3 and 167.7 ± 36.4, and the diametral tensile strength (mean±SD in MPa) was 14.1 ± 1.7, 18.3 ± 4.9, 21.2 ± 2.2, 17.2 ± 3.8 and 13.3 ± 3.3 for GIC, NGIC0, NGIC1, NGIC2 and NGIC5 respectively. NIGC0, NGIC1 and NGIC2 showed higher compressive and diametral tensile strength than GIC (p < 0.01). NGIC2 and NGIC5 showed higher release of fluoride, calcium, phosphate and silver ion than GIC and NGIC0 (p < 0.05).

CONCLUSION

A biocompatible NGIC with enhanced mechanical properties were developed. It presented enhanced fluoride, calcium, phosphate and silver ion release compared to conventional GIC.

Bioactive ceramic-based materials: beneficial properties and potential applications in dental repair and regeneration

Bioactive ceramics, primarily consisting of bioactive glasses, glass-ceramics, calcium orthophosphate ceramics, calcium silicate ceramics and calcium carbonate ceramics, have received great attention in the past decades given their biocompatible nature and excellent bioactivity in stimulating cell proliferation, differentiation and tissue regeneration. Recent studies have tried to combine bioactive ceramics with bioactive ions, polymers, bioactive proteins and other chemicals to improve their mechanical and biological properties, thus rendering them more valid in tissue engineering scaffolds. This review presents the beneficial properties and potential applications of bioactive ceramic-based materials in dentistry, particularly in the repair and regeneration of dental hard tissue, pulp-dentin complex, periodontal tissue and bone tissue. Moreover, greater insights into the mechanisms of bioactive ceramics and the development of ceramic-based materials are provided.

Bone Tissue Engineering and Nanotechnology: A Promising Combination for Bone Regeneration

Large bone defects are the leading contributor to disability worldwide, affecting approximately 1.71 billion people. Conventional bone graft treatments show several disadvantages that negatively impact their therapeutic outcomes and limit their clinical practice. Therefore, much effort has been made to devise new and more effective approaches. In this context, bone tissue engineering (BTE), involving the use of biomaterials which are able to mimic the natural architecture of bone, has emerged as a key strategy for the regeneration of large defects. However, although different types of biomaterials for bone regeneration have been developed and investigated, to date, none of them has been able to completely fulfill the requirements of an ideal implantable material. In this context, in recent years, the field of nanotechnology and the application of nanomaterials to regenerative medicine have gained significant attention from researchers. Nanotechnology has revolutionized the BTE field due to the possibility of generating nanoengineered particles that are able to overcome the current limitations in regenerative strategies, including reduced cell proliferation and differentiation, the inadequate mechanical strength of biomaterials, and poor production of extrinsic factors which are necessary for efficient osteogenesis. In this review, we report on the latest in vitro and in vivo studies on the impact of nanotechnology in the field of BTE, focusing on the effects of nanoparticles on the properties of cells and the use of biomaterials for bone regeneration.

Engineering mesoporous bioactive glasses for emerging stimuli-responsive drug delivery and theranostic applications

Mesoporous bioactive glasses (MBGs), which belong to the category of modern porous nanomaterials, have garnered significant attention due to their impressive biological activities, appealing physicochemical properties, and desirable morphological features. They hold immense potential for utilization in diverse fields, including adsorption, separation, catalysis, bioengineering, and medicine. Despite possessing interior porous structures, excellent morphological characteristics, and superior biocompatibility, primitive MBGs face challenges related to weak encapsulation efficiency, drug loading, and mechanical strength when applied in biomedical fields. It is important to note that the advantageous attributes of MBGs can be effectively preserved by incorporating supramolecular assemblies, miscellaneous metal species, and their conjugates into the material surfaces or intrinsic mesoporous networks. The innovative advancements in these modified colloidal inorganic nanocarriers inspire researchers to explore novel applications, such as stimuli-responsive drug delivery, with exceptional in-vivo performances. In view of the above, we outline the fabrication process of calcium-silicon-phosphorus based MBGs, followed by discussions on their significant progress in various engineered strategies involving surface functionalization, nanostructures, and network modification. Furthermore, we emphasize the recent advancements in the textural and physicochemical properties of MBGs, along with their theranostic potentials in multiple cancerous and non-cancerous diseases. Lastly, we recapitulate compelling viewpoints, with specific considerations given from bench to bedside.

Dimethyloxallyl glycine-loaded mesoporous bioactive glass/poly(D,L-lactide) composite scaffolds with ultrasound stimulation for promoting bone repair

Introduction: Bone tissue engineering is considered the ideal approach for bone repair. Mesoporous bioactive glass (MBG) possesses the characteristics of high drug-loading capacity and bioactivity. Low-intensity pulsed ultrasound contributes to promoting fracture healing and bone defect repair, and dimethyloxalyl glycine (DMOG) is a small molecular inhibitor that can suppress prolyl hydroxylase, reducing the degradation of hypoxia-inducible factor. Methods: In this study, we proposed to prepare DMOG-loaded MBG/poly(D,L-lactide) composite scaffolds (DMOG-MBG/PDLLA) for promoting bone repair. The effects of ultrasound stimulation and DMOG release on the cell responses of rat bone marrow mesenchymal stem cells (BMSCs) and human umbilical vein endothelial cells (HUVECs) and bone repair in vivo were investigated. Results and Discussion: The results showed that both ultrasound stimulation and DMOG release could promote the proliferation, adhesion and differentiation of BMSCs and HUVECs, respectively. After the implantation of scaffolds in rat cranial bone defect model for 8 weeks, the results indicated that the combined ultrasound stimulation and DMOG release contributed to the highest ability for promoting bone repair. Hence, the DMOG-MBG/PDLLA scaffolds with ultrasound stimulation are promising for application in bone repair.

Bio-response of copper-magnesium co-substituted mesoporous bioactive glass for bone tissue regeneration

Mesoporous bioactive glass (MBG) is widely acknowledged in bone tissue engineering due to its mesoporous structure, large surface area, and bioactivity. Recent research indicates that introduction of metallic ions has beneficial impacts on bone metabolism and angiogenesis. Thus, the features of MBG can be modified by incorporating combinations of ions, such as magnesium (Mg) and copper (Cu), which can play a considerable role in bone formation, influencing angiogenesis, osteogenesis, as well as antibacterial properties. In this study, Mg and Cu were co-doped for the first time (in a ratio of 1 : 1) in 80SiO2-5P2O5-(15 - 2x)CaO-xMgO-xCuO glass composition with x = 0, 0.5, 1, and 2 mol%, synthesized using the sol-gel and evaporation-induced self-assembly method. X-ray diffraction analysis confirmed the amorphous nature of the powders, while inductively coupled plasma-optical emission spectrometry verified the existence of dopant ions in the respective amounts. The nitrogen sorption method indicated the formation of uniform cylindrical mesopores which are open at both ends and a high surface area of the powders. TEM images show fringes, indicating an ordered mesoporous structure in all MgCu co-doped systems. In vitro bioactivity was observed in all MBG powders, confirmed by the formation of an apatite phase when placed in simulated body fluid (SBF). Flake-like microstructure characteristics of HAp crystals found on the surface of MBG powders were visualized using FESEM. Cytotoxicity tests at lower concentrations (0.1 and 1 wt/vol%) of co-doped 2MC MBG (co-doping up to 2 mol%) showed cell proliferation and viability of osteoblast-like MG-63 cells and normal human dermal fibroblast (NHDF) cells similar to the basic glass 80S. Antibacterial study of MBG pellets showed an increment in the zone of inhibition with the sequential addition of doping ions. The turbidity measurement of bacterial cultures revealed that the optimal concentration for effectively inhibiting bacterial growth was 1 wt/vol% (i.e., 10 mg mL-1) concentration of MBG extracts. The result suggested that the incorporation of Mg and Cu ions in MBG in lower concentrations of up to 2 mol% can be useful in bone regeneration owing to bioactivity, cell proliferation, and antibacterial characteristics.

Advances in Nanomaterials and Composites Based on Mesoporous Materials as Antimicrobial Agents: Relevant Applications in Human Health

Nanotechnology has emerged as a cornerstone in contemporary research, marked by the advent of advanced technologies aimed at nanoengineering materials with diverse applications, particularly to address challenges in human health. Among these challenges, antimicrobial resistance (AMR) has risen as a significant and pressing threat to public health, creating obstacles in preventing and treating persistent diseases. Despite efforts in recent decades to combat AMR, global trends indicate an ongoing and concerning increase in AMR. The primary contributors to the escalation of AMR are the misuse and overuse of various antimicrobial agents in healthcare settings. This has led to severe consequences not only in terms of compromised treatment outcomes but also in terms of substantial financial burdens. The economic impact of AMR is reflected in skyrocketing healthcare costs attributed to heightened hospital admissions and increased drug usage. To address this critical issue, it is imperative to implement effective strategies for antimicrobial therapies. This comprehensive review will explore the latest scientific breakthroughs within the metal-organic frameworks and the use of mesoporous metallic oxide derivates as antimicrobial agents. We will explore their biomedical applications in human health, shedding light on promising avenues for combating AMR. Finally, we will conclude the current state of research and offer perspectives on the future development of these nanomaterials in the ongoing battle against AMR.

Construction of antibacterial bone implants and their application in bone regeneration

Bacterial infection represents a prevalent challenge during the bone repair process, often resulting in implant failure. However, the extensive use of antibiotics has limited local antibacterial effects at the infection site and is prone to side effects. In order to address the issue of bacterial infection during the transplantation of bone implants, four types of bone scaffold implants with long-term antimicrobial functionality have been constructed, including direct contact antimicrobial scaffold, dissolution-penetration antimicrobial scaffold, photocatalytic antimicrobial scaffold, and multimodal synergistic antimicrobial scaffold. The direct contact antimicrobial scaffold involves the physical penetration or disruption of bacterial cell membranes by the scaffold surface or hindrance of bacterial adhesion through surface charge, microstructure, and other factors. The dissolution-penetration antimicrobial scaffold releases antimicrobial substances from the scaffold's interior through degradation and other means to achieve local antimicrobial effects. The photocatalytic antimicrobial scaffold utilizes the absorption of light to generate reactive oxygen species (ROS) with enhanced chemical reactivity for antimicrobial activity. ROS can cause damage to bacterial cell membranes, deoxyribonucleic acid (DNA), proteins, and other components. The multimodal synergistic antimicrobial scaffold involves the combined use of multiple antimicrobial methods to achieve synergistic effects and effectively overcome the limitations of individual antimicrobial approaches. Additionally, the biocompatibility issues of the antimicrobial bone scaffold are also discussed, including in vitro cell adhesion, proliferation, and osteogenic differentiation, as well as in vivo bone repair and vascularization. Finally, the challenges and prospects of antimicrobial bone implants are summarized. The development of antimicrobial bone implants can provide effective solutions to bacterial infection issues in bone defect repair in the foreseeable future.

Silicon-containing nanomedicine and biomaterials: materials chemistry, multi-dimensional design, and biomedical application

The invention of silica-based bioactive glass in the late 1960s has sparked significant interest in exploring a wide range of silicon-containing biomaterials from the macroscale to the nanoscale. Over the past few decades, these biomaterials have been extensively explored for their potential in diverse biomedical applications, considering their remarkable bioactivity, excellent biocompatibility, facile surface functionalization, controllable synthesis, etc. However, to expedite the clinical translation and the unexpected utilization of silicon-composed nanomedicine and biomaterials, it is highly desirable to achieve a thorough comprehension of their characteristics and biological effects from an overall perspective. In this review, we provide a comprehensive discussion on the state-of-the-art progress of silicon-composed biomaterials, including their classification, characteristics, fabrication methods, and versatile biomedical applications. Additionally, we highlight the multi-dimensional design of both pure and hybrid silicon-composed nanomedicine and biomaterials and their intrinsic biological effects and interactions with biological systems. Their extensive biomedical applications span from drug delivery and bioimaging to therapeutic interventions and regenerative medicine, showcasing the significance of their rational design and fabrication to meet specific requirements and optimize their theranostic performance. Additionally, we offer insights into the future prospects and potential challenges regarding silicon-composed nanomedicine and biomaterials. By shedding light on these exciting research advances, we aspire to foster further progress in the biomedical field and drive the development of innovative silicon-composed nanomedicine and biomaterials with transformative applications in biomedicine.

In vitro co-culture models for the assessment of orthopedic antibacterial biomaterials

The antibacterial biofunctionality of bone implants is essential for the prevention and treatment of implant-associated infections (IAI). In vitro co-culture models are utilized to assess this and study bacteria-host cell interactions at the implant interface, aiding our understanding of biomaterial and the immune response against IAI without impeding the peri-implant bone tissue regeneration. This paper reviews existing co-culture models together with their characteristics, results, and clinical relevance. A total of 36 studies were found involving in vitro co-culture models between bacteria and osteogenic or immune cells at the interface with orthopedic antibacterial biomaterials. Most studies (∼67%) involved co-culture models of osteogenic cells and bacteria (osteo-bac), while 33% were co-culture models of immune cells and bacterial cells (im-bac). All models involve direct co-culture of two different cell types. The cell seeding sequence (simultaneous, bacteria-first, and cell-first) was used to mimic clinically relevant conditions and showed the greatest effect on the outcome for both types of co-culture models. The im-bac models are considered more relevant for early peri-implant infections, whereas the osteo-bac models suit late infections. The limitations of the current models and future directions to develop more relevant co-culture models to address specific research questions are also discussed.

Biosynthesized Silver Nanoparticles Inhibit Osteoclastogenesis by Suppressing NF-κB Signaling Pathways

Osteoclasts overactivity plays a critical role in the progress of inflammatory bone loss. In addition, ROS can facilitate the formation and function of osteoclasts. Silver nanoparticles (Ag NPs) with ROS scavenging activity are potential candidates for inflammatory bone loss. In this regard, the biosynthetic Ag NPs with low toxicity and high stability by using Flos Sophorae Immaturus extract as the reducing and capping agents are reported. The inflammatory bone loss model is established by injecting LPS. Quantitative reverse transcription-polymerase chain reaction and Western Blot are utilized to determine the expression level of target biomarkers related to osteoclast formation. Ag NPs can significantly reduce the number of TRAP-positive (TRAP+ ) cells. In addition, Ag NPs down-regulate the expression of biomarkers relevant to osteoclast formation. Interestingly, Ag NPs can effectively suppress osteoclast formation via down-regulating ROS-mediated phosphorylation of NF-κB pathways. The in vivo study shows that Ag NPs can ameliorate bone density and decrease osteoclast number. Due to these benefits, the constructed Ag NPs can delay the progression of inflammatory bone loss. These findings suggest that Ag NPs are a potential therapeutic agent in the treatment of inflammatory bone loss.

A Multifunctional Hydrogel for Simultaneous Visible H2 O2 Monitoring And Accelerating Diabetic Wound Healing

Diabetic wound is one of the chronic wounds that is difficult to heal, and effective treatment of it still confronts a great challenge. Monitoring the variation of diabetic wound microenvironment (such as hydrogen peroxide (H2 O2 )) can understand the wound state and guide the wound management. Herein, a multifunctional hydrogel with the abilities of monitoring the H2 O2 concentration, alleviating oxidative stress and promoting wound healing is developed, which is prepared by encapsulating manganese-containing bioactive glass (MnBG) and CePO4 :Tb in biocompatible gelatin methacryloyl (GelMA) hydrogel (CPT-MnBG-Gel). On the one hand, the H2 O2 -dependent fluorescence quenching effect of the CePO4 :Tb contributes to visible monitoring of the H2 O2 concentration of wounds via smartphone imaging, and the CPT-MnBG-Gel hydrogel can effectively monitor the H2 O2 level of 10.35-200 µmol L-1 . On the other hand, MnBG can alleviate oxidative stress and promote the proliferation, migration and differentiation of fibroblasts and endothelial cells in vitro owing to the bioactive Mn and Si ions, and in vivo evaluation also demonstrates that the CPT-MnBG-Gel hydrogels can effectively accelerate wound healing. Hence, such multifunctional hydrogel is promising for diabetic wound management and accelerating wound healing.

Preparation and Characterization of Mono- and Biphasic Ca1-xAgxHPO4·nH2O Compounds for Biomedical Applications

This study aimed to explore the effects of the full-scale replacement (up to 100%) of Ca2+ ions with Ag1+ ions in the structure of brushite (CaHPO4·2H2O). This substitution has potential benefits for producing monophasic and biphasic Ca1-xAgxHPO4·nH2O compounds. To prepare the starting solutions, (NH4)2HPO4, Ca(NO3)2·4H2O, and AgNO3 at different concentrations were used. The results showed that when the Ag/Ca molar ratio was below 0.25, partial substitution of Ca with Ag reduced the size of the unit cell of brushite. As the Ag/Ca molar ratio increased to 4, a compound with both monoclinic CaHPO4·2H2O and cubic nanostructured Ag3PO4 phases formed. There was a nearly linear relationship between the Ag ion ratio in the starting solutions and the wt% precipitation of the Ag3PO4 phase in the resulting compound. Moreover, when the Ag/Ca molar ratio exceeded 4, a single-phase Ag3PO4 compound formed. Hence, adjusting the Ag/Ca ratio in the starting solution allows the production of biomaterials with customized properties. In summary, this study introduces a novel synthesis method for the mono- and biphasic Ca1-xAgxHPO4·nH2O compounds brushite and silver phosphate. The preparation of these phases in a one-pot synthesis with controlled phase composition resulted in the enhancement of existing bone cement formulations by allowing better mixing of the starting ingredients.

Novel Antibacterial Materials and Coatings-A Perspective by the Editors

The fight between humans and bacteria has escalated to a new level.

Synthesis, Characterization, and Docking Study of Novel Thioureidophosphonate-Incorporated Silver Nanocomposites as Potent Antibacterial Agents

Newly synthesized mono- and bis-thioureidophosphonate (MTP and BTP) analogues in eco-friendly conditions were employed as reducing/capping cores for 100, 500, and 1000 mg L^-1 of silver nitrate. The physicochemical properties of silver nanocomposites (MTP(BTP)/Ag NCs) were fully elucidated using spectroscopic and microscopic tools. The antibacterial activity of the nanocomposites was screened against six multidrug-resistant pathogenic strains, comparable to ampicillin and ciprofloxacin commercial drugs. The antibacterial performance of BTP was more substantial than MTP, notably with the best minimum inhibitory concentration (MIC) of 0.0781 mg/mL towards Bacillus subtilis, Salmonella typhi, and Pseudomonas aeruginosa. Among all, BTP provided the clearest zone of inhibition (ZOI) of 35 ± 1.00 mm against Salmonella typhi. After the dispersion of silver nanoparticles (AgNPs), MTP/Ag NCs offered dose-dependently distinct advantages over the same nanoparticle with BTP; a more noteworthy decline by 4098 × MIC to 0.1525 × 10^-3 mg/mL was recorded for MTP/Ag-1000 against Pseudomonas aeruginosa over BTP/Ag-1000. Towards methicillin-resistant Staphylococcus aureus (MRSA), the as-prepared MTP(BTP)/Ag-1000 displayed superior bactericidal ability in 8 h. Because of the anionic surface of MTP(BTP)/Ag-1000, they could effectively resist MRSA (ATCC-43300) attachment, achieving higher antifouling rates of 42.2 and 34.4% at most optimum dose (5 mg/mL), respectively. The tunable surface work function between MTP and AgNPs promoted the antibiofilm activity of MTP/Ag-1000 by 1.7 fold over BTP/Ag-1000. Lastly, the molecular docking studies affirmed the eminent binding affinity of BTP over MTP-besides the improved binding energy of MTP/Ag NC by 37.8%-towards B. subtilis-2FQT protein. Overall, this study indicates the immense potential of TP/Ag NCs as promising nanoscale antibacterial candidates.

Preparation of functional and reactive nanosilver nanogels using oxidized carboxymethyl cellulose

The designing of functional and reactive nanosilver has been carried out by in-situ reduction of silver nitrate using oxidized carboxymethyl cellulose (OCMC). The reduction process is also accompanied by the stabilization of nanoparticles using the OCMC polymer chain, leading to the formation of a structure where nanosilver is entrapped within OCMC gel. The silver nanogels characterized using transmission electron microscopy (TEM) are found to be ∼22 nm. By virtue of the presence of dialdehyde functionality around the silver nanogels, they have the ability to react with a polymer having a complementary functional group. The nanogels have exhibited prominent antimicrobial activity against both gram-negative and gram-positive bacteria. It has been observed that a 0.3 mM concentration of silver nanogel is active in inhibiting bacterial growth. The antibacterial activity of the synthesized Ag nanogels was dose-dependent, with 99.9 % of E. coli and S. aureus destroyed within 5 h at a concentration of 0.4 mM Ag nanogels. The nanogels disrupted the bacterial cell wall and generated reactive oxygen species inside the cell, which resulted in cell death. This investigation provides a very interesting application as a coating for biomedical implants and devices.

Achievements in Mesoporous Bioactive Glasses for Biomedical Applications

Nowadays, mesoporous bioactive glasses (MBGs) are envisaged as promising candidates in the field of bioceramics for bone tissue regeneration. This is ascribed to their singular chemical composition, structural and textural properties and easy-to-functionalize surface, giving rise to accelerated bioactive responses and capacity for local drug delivery. Since their discovery at the beginning of the 21st century, pioneering research efforts focused on the design and fabrication of MBGs with optimal compositional, textural and structural properties to elicit superior bioactive behavior. The current trends conceive MBGs as multitherapy systems for the treatment of bone-related pathologies, emphasizing the need of fine-tuning surface functionalization. Herein, we focus on the recent developments in MBGs for biomedical applications. First, the role of MBGs in the design and fabrication of three-dimensional scaffolds that fulfil the highly demanding requirements for bone tissue engineering is outlined. The different approaches for developing multifunctional MBGs are overviewed, including the incorporation of therapeutic ions in the glass composition and the surface functionalization with zwitterionic moieties to prevent bacterial adhesion. The bourgeoning scientific literature on MBGs as local delivery systems of diverse therapeutic cargoes (osteogenic/antiosteoporotic, angiogenic, antibacterial, anti-inflammatory and antitumor agents) is addressed. Finally, the current challenges and future directions for the clinical translation of MBGs are discussed.