Modification of physicochemical characteristics of active pharmaceutical ingredients and application of supersaturatable dosage forms for improving bioavailability of poorly absorbed drugs

Modification of physicochemical properties of chitosan to improve its pharmaceutical and agrochemical potential applications

Chitosan has received much more attention as a functional biopolymer with applications in pharmaceuticals, agricultural, drug delivery systems and cosmetics. The objectives of present investigation were to carry out modification of chitosan for enhancement of aqueous solubility, which will impart increased solubility and dissolution rate of poorly soluble drug itraconazole (ITZ) and also evaluate the modified chitosan for soyabean seed germination studies. The modification of chitosan was accomplished through the antisolvent precipitation method; employing five carboxylic acids. The resulting products were assessed for changes in molecular weight, degree of deacetylation, solubility and solid state characterization. Subsequently, the modified chitosan was complexed with itraconazole using the co-grinding technique. The prepared formulations were evaluated for solubility, FTIR (Fourier-transform infrared spectroscopy), PXRD (Powder X-ray diffraction), in-vitro dissolution studies. Furthermore the effect of modified chitosan has been evaluated on soybean seed germination. Results demonstrated that, modified chitosan improves self and solubility of itraconazole by six folds. As there was increased degree of deacetylation of chitosan leads to improvement in solubility. The results of FTIR showed the slight shifting of peaks in co-grind formulations of itraconazole. Formulations showed reduction in crystallinity of drug which leads to enhancement in dissolution rate as compared to pure itraconazole. Retention of property of seed germination was observed with modified chitosan at optimum concentration of 3 % w/v, with benefit of enhanced aqueous solubility of chitosan. This positive result paves the way for the advancement of pharmaceutical and agrochemical products employing derivatives of chitosan.

Size-dependent Effect on Foliar Utilization and Biocontrol Efficacy of Emamectin Benzoate Delivery Systems

The development of nanopesticides provides new avenues for pesticide reduction and efficiency improvement. However, the size effect of nanopesticides remains unclear, and its underlying mechanisms of influence have become a major obstacle in the design and application of pesticide nanoformulations. In this research, the noncarrier-coated emamectin benzoate (EB) solid dispersions (Micro-EB and Nano-EB) were produced under a constant surfactant-to-active ingredient ratio by a self-emulsifying-carrier solidification technique. The particle size of Micro-EB was 162 times that of spherical Nano-EB. The small size and large specific surface area of Nano-EB facilitated the adsorption of surfactants on the surface of the particles, thereby improving its dispersibility, suspensibility, and stability. The pinning effect of nanoparticles significantly suppressed droplet retraction and rebounding. Moreover, Nano-EB exhibited a 25% higher retention of the active ingredient on cabbage leaves and a 70% higher washing resistance than Micro-EB, and both were significantly different. The improvement of abilities in wetting, spreading, and retention of Nano-EB on crop leaves contributed to the increase in foliar utilization, which further resulted in a 1.6-fold enhancement of bioactivity against target Spodoptera exigua compared to Micro-EB. Especially, Nano-EB did not exacerbate the safety risk to the nontarget organism zebrafish with no significant difference. This study elaborates the size effect on the effectiveness and safety of pesticide formulations and lays a theoretical foundation for the development and rational utilization of efficient and environmentally friendly nanopesticides.

Influence of Nucleation on Relaxation, Molecular Cooperativity, and Physical Stability of Celecoxib Glass

Although nucleation is considered the first step in the crystallization of glass materials, the structure and properties of the nuclei are not understood well. Influence of nucleation on the structure and dynamics of celecoxib glass was evaluated in this study. The nuclei for Form III were induced by annealing the glass at freezing temperature, and their impact on the relaxation behavior was investigated using thermal analysis and broadband dielectric spectroscopy to find accelerated α relaxation and suppressed β relaxation. In addition, observed after nucleation was a decrease in cooperativity of the molecular motion, presumably because of the appearance of void spaces in the glass structure. During long-term isothermal crystallization studies, crystal growth to Form III was accelerated in the presence of the nuclei, whereas this effect was less remarkable when a different crystal form dominated the crystallization behavior. These observations should provide more detailed insights into the nucleation mechanism and impact of nucleation on molecular dynamics including physical stability of pharmaceutical glasses. In addition, discussed is the remarkable acceleration of the crystallization rate of the celecoxib glass just below its Tg, which could be understood by diffusionless crystal growth.

Recent advances in dual-drug co-amorphous systems

Poor solubility of drugs and therapeutic candidates poses a significant challenge in drug research and development. Biopharmaceutical class II drugs exhibit limited absorption because of their weak solubility and high permeability. Co-amorphous systems (CAMs) have been studied widely as a way to improve the solubility of drugs. This review summarizes recent advancements in dual-drug CAMs, including improvements in formulation, manufacturing, and solid-state characterization, and highlights the importance of enhancing solubility and stability. It emphasizes the potential synergistic effects of two drugs in CAMs and explores formulation strategies and challenges related to maintaining the amorphous state. Case studies demonstrate the successful application of CAMs in combination therapies that offer improved therapeutic efficacy.

Quantification of crystallinity during indomethacin crystalline transformation from α- to γ-polymorphic forms and of the thermodynamic contribution to dissolution in aqueous buffer and solutions of solubilizer

The thermodynamic properties and dissolution of indomethacin (INM) were analyzed as models for poorly water-soluble drugs. Physical mixtures of the most stable γ-form and metastable α-form of INM at various proportions were prepared, and their individual signal intensities proportional to their mole fractions were observed using X-ray powder diffraction and Fourier transform infrared spectrometry at standard temperature. The endothermic signals of the α-form, with a melting point of 426 K, and that of the γ-form, with a melting point of 433 K, were obtained by differential scanning calorimetry (DSC). Furthermore, an exothermic DSC peak of the α/γ-phase transition at approximately 428 K was obtained. As we computed the melting entropy of the α-form and that of its transformation, the frequency of the transition was quantitatively determined, which indicated the maximum of the α/γ-phase transition at an α-form proportion of 68%. Subsequently, the thermodynamic contributions of the α- and γ-forms were analyzed using a Van't Hoff plot for solubility in aqueous solutions at pH 6.8. The dissolution enthalpies for α- and γ-forms were 28.2 and 31.2 kJ mol-1, respectively, which are in agreement with the quantitative contribution predicted by the product of the temperature and melting entropy. The contribution of melting entropy was conserved in different dissolution processes with aqueous solvents containing lidocaine, diltiazem, l-carnosine, and aspartame as solubilizers; their γ-form Setschenow coefficients were -39.6, +82.9, -17.3, and +23.2, whereas those of the α-form were -39.7, +80.4, -16.7, and +22.7, respectively. We conclude that the dissolution ability of the solid state and solubilizers indicate their additivity independently.

Advancing Drug Delivery Paradigms: Polyvinyl Pyrolidone (PVP)-Based Amorphous Solid Dispersion for Enhanced Physicochemical Properties and Therapeutic Efficacy

BACKGROUND

The current challenge in drug development lies in addressing the physicochemical issues that lead to low drug effectiveness. Solubility, a crucial physicochemical parameter, greatly influences various biopharmaceutical aspects of a drug, including dissolution rate, absorption, and bioavailability. Amorphous solid dispersion (ASD) has emerged as a widely explored approach to enhance drug solubility.

OBJECTIVE

The objective of this review is to discuss and summarize the development of polyvinylpyrrolidone (PVP)-based amorphous solid dispersion in improving the physicochemical properties of drugs, with a focus on the use of PVP as a novel approach.

METHODOLOGY

This review was conducted by examining relevant journals obtained from databases such as Scopus, PubMed, and Google Scholar, since 2018. The inclusion and exclusion criteria were applied to select suitable articles.

RESULTS

This study demonstrated the versatility and efficacy of PVP in enhancing the solubility and bioavailability of poorly soluble drugs. Diverse preparation methods, including solvent evaporation, melt quenching, electrospinning, coprecipitation, and ball milling are discussed for the production of ASDs with tailored characteristics.

CONCLUSION

PVP-based ASDs could offer significant advantages in the formulation strategies, stability, and performance of poorly soluble drugs to enhance their overall bioavailability. The diverse methodologies and findings presented in this review will pave the way for further advancements in the development of effective and tailored amorphous solid dispersions.

Preparation and Comprehensive Evaluation of the Efficacy and Safety of Chlorantraniliprole Nanosuspension

Chlorantraniliprole is a broad-spectrum insecticide that has been widely used to control pests in rice fields. Limited by its low solubility in both water and organic solvents, the development of highly efficient and environmentally friendly chlorantraniliprole formulations remains challenging. In this study, a low-cost and scalable wet media milling technique was successfully employed to prepare a chlorantraniliprole nanosuspension. The average particle size of the extremely stable nanosuspension was 56 nm. Compared to a commercial suspension concentrate (SC), the nanosuspension exhibited superior dispersibility, as well as superior foliar wetting and retention performances, which further enhanced its bioavailability against Cnaphalocrocis medinalis. The nanosuspension dosage could be reduced by about 40% while maintaining a comparable efficacy to that of the SC. In addition, the chlorantraniliprole nanosuspension showed lower residual properties, a lower toxicity to non-target zebrafish, and a smaller effect on rice quality, which is conducive to improving food safety and the ecological safety of pesticide formulations. In this work, a novel pesticide-reduction strategy is proposed, and theoretical and data-based support is provided for the efficient and safe application of nanopesticides.

Nucleation During Storage Impeded Supersaturation in the Dissolution Process of Amorphous Celecoxib

The aqueous solubility of active pharmaceutical ingredients (APIs) is one of the most critical factors in determining the absorption of orally administered drugs. Amorphization of API may offer better drug absorption than the crystalline state owing to enhanced solubility. However, if crystal nuclei are formed during storage, they may develop into crystals upon contact with water, thus limiting the dissolution advantage. In an earlier study, we found that the nuclei of amorphous celecoxib (CEL) could be formed at freezing temperatures (FT) without further crystal growth. Following this finding, we compared the dissolution performances of amorphous CEL annealed at room temperature (RT, 25 °C) or FT (-20 °C). We found that only the RT-annealed CEL could achieve a supersaturated state effectively during the dissolution process, which could be explained by the fast conversion of the FT-annealed amorphous CEL to a crystalline state owing to the presence of nuclei. Investigation of the residual solids revealed that supersaturation could be maintained for a while after the appearance of the crystals, which could be explained by heterogeneous nucleation and competition between the dissolution of amorphous parts and crystallization. In addition, a new crystalline form of CEL was observed during dissolution.

Rigid Nuclei and Flexible Nuclei: Appearance and Disappearance of Nuclei in Indomethacin Glass Revealed by a Long-Term Annealing Study

In this study, nucleation/crystallization behaviors of indomethacin glass are discussed with emphasis on the fate of nuclei, which is explained using a notion of "rigid" and "flexible" nuclei. The observation was made mainly by thermal analysis of indomethacin glass after long-term annealing at various temperatures. Formation of nuclei was evaluated by observing cold crystallization behaviors of the annealed glasses, as they should be dominated by the "nuclei form" produced in the glass. Nuclei of forms α and γ, which have opposite stability trends, were found to appear over a wide temperature range. The nuclei of form α were stable even in the presence of other crystal forms, whereas those of form γ were likely to be easily integrated into other crystals during their growth, which was explained by a notion of rigid and flexible nuclei. Moreover, unconventionally fast crystallization in the glass-transition region and the finding of a new crystal form are also reported.

Use of surfactant-based amorphous solid dispersions for BDDCS class II drugs to enhance oral bioavailability: A case report of resveratrol

This paper aimed to improve in vitro dissolution/solubility as well as inhibit intestinal metabolism and thus enhance oral bioavailability for a BDDCS class II drug by constructing surfactant-based amorphous solid dispersions using resveratrol (RES) as a model drug. After preliminary screening of polymers and surfactants, and subsequent prescription optimization, two optimized spray-drying RES-polymer-surfactant ASDs were obtained and exhibited a significant increase in solubility of RES by 2.69-3.45-fold compared to crystalline RES, and by 1.13-1.56-fold compared to corresponding RES-polymer ASDs, maintaining a higher concentration in the dissolution process. A metabolism study using everted sacs showed that two optimized ASDs reduced the concentration ratio of RES-G to RES to 51.66%-52.05% of crystalline RES on the serosal side of the rat everted intestinal sac at 2 h. Consequently, these two RES-polymer-surfactant ASDs achieved significantly higher exposure of RES in the plasma with significant enhancements in C_max (2.33-2.35-fold higher than crystalline RES, and 1.72-2.04-fold higher than corresponding RES-polymer ASDs), and in AUC _0-∞ (3.51-3.56-fold higher than crystalline RES, and 1.38-1.41-fold higher than corresponding RES-polymer ASDs). These advantages of the RES-polymer-surfactant ASDs in oral absorption of RES were attributed to solubilization by ASDs and metabolic inhibition by UGT inhibitors. The introduction of surfactants including EL and Lab to ASDs plays an important role in inhibiting glucuronidation and further improving solubility. This study demonstrated that such surfactant-based amorphous solid dispersions may serve as a new approach to increase the oral absorption of BDDCS class II drugs.

Hot Melt Extruded Posaconazole-Based Amorphous Solid Dispersions—The Effect of Different Types of Polymers

Four model polymers, representing (i) amorphous homopolymers (Kollidon K30, K30), (ii) amorphous heteropolymers (Kollidon VA64, KVA), (iii) semi-crystalline homopolymers (Parteck MXP, PXP), and (iv) semi-crystalline heteropolymers (Kollicoat IR, KIR), were examined for their effectiveness in creating posaconazole-based amorphous solid dispersions (ASDs). Posaconazole (POS) is a triazole antifungal drug that has activity against Candida and Aspergillus species, belonging to class II of the biopharmaceutics classification system (BCS). This means that this active pharmaceutical ingredient (API) is characterized by solubility-limited bioavailability. Thus, one of the aims of its formulation as an ASD was to improve its aqueous solubility. Investigations were performed into how polymers affected the following characteristics: melting point depression of the API, miscibility and homogeneity with POS, improvement of the amorphous API’s physical stability, melt viscosity (and associated with it, drug loading), extrudability, API content in the extrudate, long term physical stability of the amorphous POS in the binary drug–polymer system (in the form of the extrudate), solubility, and dissolution rate of hot melt extrusion (HME) systems. The obtained results led us to conclude that the physical stability of the POS-based system increases with the increasing amorphousness of the employed excipient. Copolymers, compared to homopolymers, display greater homogeneity of the investigated composition. However, the enhancement in aqueous solubility was significantly higher after utilizing the homopolymeric, compared to the copolymeric, excipients. Considering all of the investigated parameters, the most effective additive in the formation of a POS-based ASD is an amorphous homopolymer—K30.

Current Techniques of Water Solubility Improvement for Antioxidant Compounds and Their Correlation with Its Activity: Molecular Pharmaceutics

The aqueous solubility of a drug is important in the oral formulation because the drug can be absorbed from intestinal sites after being dissolved in the gastrointestinal fluid, leading to its bioavailability. Almost 80% of active pharmaceutical ingredients are poorly water-soluble, including antioxidant compounds. This makes antioxidant activity inefficient in preventing disease, particularly for orally administered formulations. Although several investigations have been carried out to improve the solubility of antioxidant compounds, there is still limited research fully discussing the subject. Therefore, this study aimed to provide an overview and discussion of the issues related to the methods that have been used to improve the solubility and activity of antioxidant compounds. Articles were found using the keywords "antioxidant" and "water solubility improvement" in the Scopus, PubMed, and Google Scholar databases. The selected articles were published within the last five years to ensure all information was up-to-date with the same objectives. The most popular methods of the strategies employed were solid dispersion, co-amorphous, and nanoparticle drug delivery systems, which were used to enhance the solubility of antioxidant compounds. These investigations produced impressive results, with a detailed discussion of the mechanism of improvement in the solubility and antioxidant activity of the compounds developed. This review shows that the strategies used to increase the solubility of antioxidant compounds successfully improved their antioxidant activity with enhanced free radical scavenging abilities.

Current State and Challenges of Physiologically Based Biopharmaceutics Modeling (PBBM) in Oral Drug Product Development

Physiologically based biopharmaceutics modeling (PBBM) emphasizes the integration of physicochemical properties of drug substance and formulation characteristics with system physiological parameters to predict the absorption and pharmacokinetics (PK) of a drug product. PBBM has been successfully utilized in drug development from discovery to postapproval stages and covers a variety of applications. The use of PBBM facilitates drug development and can reduce the number of preclinical and clinical studies. In this review, we summarized the major applications of PBBM, which are classified into six categories: formulation selection and development, biopredictive dissolution method development, biopharmaceutics risk assessment, clinically relevant specification settings, food effect evaluation and pH-dependent drug-drug-interaction risk assessment. The current state of PBBM applications is illustrated with examples from published studies for each category of application. Despite the variety of PBBM applications, there are still many hurdles limiting the use of PBBM in drug development, that are associated with the complexity of gastrointestinal and human physiology, the knowledge gap between the in vitro and the in vivo behavior of drug products, the limitations of model interfaces, and the lack of agreed model validation criteria, among other issues. The challenges and essential considerations related to the use of PBBM are discussed in a question-based format along with the scientific thinking on future research directions. We hope this review can foster open discussions between the pharmaceutical industry and regulatory agencies and encourage collaborative research to fill the gaps, with the ultimate goal to maximize the applications of PBBM in oral drug product development.

Effervescence-induced amorphous solid dispersions with improved drug solubility and dissolution

The current study aimed to investigate drug carrier miscibility in pharmaceutical solid dispersions (SD) and include the effervescent system, i.e. Effervescence-induced amorphous solid dispersions (ESD), to enhance the solubility of a poorly water-soluble Glibenclamide (GLB). Kollidon VA 64, PEG-3350, and Gelucire-50/13 were selected as the water-soluble carriers. The miscibility of the drug-carrier was predicted by molecular dynamics simulation, Hansen solubility parameters, Flory-Huggins theory, and Gibb's free energy. Solid dispersions were prepared by microwave, solvent evaporation, lyophilization, and Hot Melt Extrusion (HME) methods. The prepared solid dispersions were subjected to solubility, in-vitro dissolution, and other characterization studies. The in-silico and theoretical approach suggested that the selected polymers exhibited better miscibility with GLB. Solid-state characterizations like FTIR and ¹H NMR proved the formation of intermolecular hydrogen bonding between the drug and carriers, which was comparatively higher in ESDs than SDs. DSC, PXRD, and microscopic examination of GLB and SDs confirmed the amorphization of GLB, which was higher in ESDs than SDs. Gibb's free energy concept suggested that the prepared solid dispersions will be stable at room temperature. Ex-vivo intestinal absorption study on optimized ESDs prepared with Kollidon VA64 using the HME technique exhibited a higher flux and permeability coefficient than the pure drug suggesting a better drug delivery. The drug-carrier miscibility was successfully studied in SDs of GLB. The addition of the effervescent agent further enhanced the solubility and dissolution of GLB. Additionally, this might exhibit a better bioavailability, confirmed by ex-vivo intestinal absorption study.

Selection of bionic Co-former improves the dissolution of Neohesperidin via Co-amorphous solid dispersion with Naringin

The co-amorphous solid dispersion (c-ASD) is a useful method to enhance water solubility of poorly soluble drugs. The objective of this study was to improve the dissolution of Neohesperidin (NE) via binary c-ASD which, to the best of our knowledge, has not yet been reported. Since NE and Naringin (NA) co-exist abundantly in Chinese herbal medicine Fructus Aurantii Immaturus, it was hypothesised that NA served as a co-former of NE-NA c-ASD to improve the dissolution profile of NE. Hence, NA was selected to prepare c-ASD with NE at a weight ratio of 4:10, 10:10, 10:4 by lyophilisation. They were characterised according to thermal properties, molecular interactions, dissolution properties and physical stability. We found that the 10:10 ratio was the most potent in enhancing the dissolution behaviour of NE; whereby NE and NA are highly synchronous in pair-wise solvation process. A molecular mixture was achieved through the intermolecular H-bond and pi-pi stacking force formed between NE and NA and was stable for 7 -months. We concluded that the NE-NA co-amorphous binary system is a promising strategy to improve the dissolution behaviour and stabilise the amorphous state of NE. Bionic co-former selection may be an innovative and effective way to accurately determine the appropriate co-former of poorly water soluble substances.

Prediction of the Mechanical Deformation Properties of Organic Crystals Based upon their Crystallographic Structures: Case Studies of Pentaerythritol and Pentaerythritol Tetranitrate

PURPOSE

Development of a quantitative model and associated workflow for predicting the mechanical deformation properties (plastic deformation or cleavage fracture) of organic single crystals from their crystallographic structures using molecular and crystallographic modelling.

METHODS

Intermolecular synthons, hydrogen bonding, crystal morphology and surface chemistry are modelled using empirical force fields with the data integrated into the analysis of lattice deformation as computed using a statistical approach.

RESULTS

The approach developed comprises three main components. Firstly, the identification of the likely direction of deformation based on lattice unit cell geometry; secondly, the identification of likely lattice planes for deformation through the calculation of the strength and stereochemistry of interplanar intermolecular interactions, surface plane rugosity and surface energy; thirdly, identification of potential crystal planes for cleavage fracture by assessing intermolecular bonding anisotropy. Pentaerythritol is predicted to fracture by brittle cleavage on the {001} lattice planes by strong in-plane hydrogen-bond interactions in the <110>, whereas pentaerythritol tetranitrate is predicted to deform by plastic deformation through the slip system {110} < 001>, with both predictions being in excellent agreement with known experimental data.

CONCLUSION

A crystallographic framework and associated workflow for predicting the mechanical deformation of molecular crystals is developed through quantitative assessment of lattice energetics, crystal surface chemistry and crystal defects. The potential for the de novo prediction of the mechanical deformation of pharmaceutical materials using this approach is highlighted for its potential importance in the design of formulated drug products process as needed for manufacture by direct compression.

Inhibition of Liquid-Liquid Phase Separation for Breaking the Solubility Barrier of Amorphous Solid Dispersions to Improve Oral Absorption of Naftopidil

Amorphous solid dispersion (ASD) is one of the most promising technologies for improving the oral absorption of poorly soluble compounds. In this study, naftopidil (NFT) ASDs were prepared using vinylpyrrolidone-vinyl acetate copolymer (PVPVA), hydroxypropyl methylcellulose acetate succinate (HPMCAS), and poly(methacrylic acid-co-methyl methacrylate) L100-55 (Eudragit) to improve the dissolution and oral absorption behaviors of NFT. During the dissolution process of ASD, liquid-liquid phase separation (LLPS) may occur when certain requirements are met for providing a maximum quasi-stable concentration achievable by amorphization. The occurrence of LLPS was confirmed in the presence of PVPVA and HPMCAS; however, Eudragit inhibited LLPS owing to its molecular interaction with NFT. Although the dissolution behavior of the Eudragit ASD was found to be markedly poorer than that of other ASDs, it offered the best oral absorption in rats. The findings of the current study highlight the possibility for improving the oral absorption of poorly soluble drugs by this ASD, which should be eliminated from candidate formulations based on the conventional in vitro tests.

Tailored Supersaturable Immediate Release Behaviors of Hypotensive Supersaturating Drug-Delivery Systems Combined with Hot-Melt Extrusion Technique and Self-Micellizing Polymer

The short-term immediate release of supersaturated drug-delivery systems (SDDSs) presents an interesting process that can be tailored to multi-stage release events including initial release after dosing and dissolution, evolved release over longer dissolution periods for biological absorption, and terminal release following the end of immediate release. However, although comprehensive analysis of these critical release behaviors is often ignored yet essential for understanding the supersaturable immediate-release events for supersaturable solid formations when employing new techniques or polymers matched to a particular API. Hot-melt extrusion (HME) has become a popular continuous thermodynamic disordering technique for amorphization. The self-micellizing polymer Soluplus^® is reported to be a potential amorphous and amphiphilic graft copolymer frequently used in many nano/micro supersaturable formulations. Our current work aims to develop hypotensive supersaturating solid dispersion systems (faSDDS_HME) containing the BCS II drug, felodipine, when coordinately employing the HME technique and self-micellizing Soluplus^®, and to characterize their amorphization as well as immediate release. Other discontinuous techniques were used to prepare control groups (faSDDS_SE and faSDDS_QC). Tailored initial/evolved/terminal three-stage supersaturable immediate-release behaviors were identified and possible mechanisms controlling the release were explored. HME produced the highest initial release in related faSDDS_HME. During the evolved-release period, highly extended "spring-parachute" process was found in HME-induced amorphization owing to its superior supersaturation duration. Due to the enhanced crystallization inhibition effect, faSDDS_HME displayed the strongest terminal release as measured by solubility. For release mechanisms associated with HME, molecular interaction is not the likely dominant mechanism responsible for the improved properties induced by faSDDS_HME. For release mechanisms involved with the polymer Soluplus^® itself, they were found to inhibit drug recrystallization, spontaneously solubilize the drug and lead to improved molecular interactions in all SDDS systems, which were the factors responsible for the improved release. These mechanisms play an important role for the generation of an extended multi-stage immediate release produced via HME or self-micellizing polymer. This study provides a deeper understanding on amorphization and superior multi-stage supersaturable immediate-release behaviors for a particular hypotensive supersaturated delivery system combined with an HME-based continuous manufacturing technique and self-micellizing polymer strategy.

Hydroxypropyl Cellulose for Drug Precipitation Inhibition: From the Potential of Molecular Interactions to Performance Considering Microrheology

There has been recent interest in using hydroxypropyl cellulose (HPC) for supersaturating drug formulations. This study investigated the potential for molecular HPC interactions with the model drug celecoxib by integrating novel approaches in the field of drug supersaturation analysis. Following an initial polymer characterization study, quantum-chemical calculations and molecular dynamics simulations were complemented with results of inverse gas chromatography and broadband diffusing wave spectroscopy. HPC performance was studied regarding drug solubilization and kinetics of desupersaturation using different grades (i.e., HPC-UL, SSL, SL, and L). The results suggested that the potential contribution of dispersive interactions and hydrogen bonding depended strongly on the absence or presence of the aqueous phase. It was proposed that aggregation of HPC polymer chains provided a complex heterogeneity of molecular environments with more or less excluded water for drug interaction. In precipitation experiments at a low aqueous polymer concentration (i.e., 0.01%, w/w), grades L and SL appeared to sustain drug supersaturation better than SSL and UL. However, UL was particularly effective in drug solubilization at pH 6.8. Thus, a better understanding of drug-polymer interactions is important for formulation development, and polymer blends may be used to harness the combined advantages of individual polymer grades.

Ternary Eutectic Ezetimibe-Simvastatin-Fenofibrate System and the Physical Stability of Its Amorphous Form

In this study, the phase diagram of the ternary system of ezetimibe–simvastatin–fenofibrate was established. It has been proven that the ternary composition recommended for the treatment of mixed hyperlipidemia forms a eutectic system. Since eutectic mixtures are characterized by greater solubility and dissolution rate, the obtained result can explain the marvelous medical effectiveness of combined therapy. Considering that another well-known method for improving the aqueous solubility is amorphization, the ternary system with eutectic concentration was converted into an amorphous form. Thermal properties, molecular dynamics, and physical stability of the obtained amorphous system were thoroughly investigated through various experimental techniques compared to both: neat amorphous active pharmaceutical ingredients (considered separately) and other representative concentrations of ternary mixture. The obtained results open up a new way of selecting the therapeutic concentrations for combined therapies, a path that considers one additional variable: eutecticity.

"Felodipine-indomethacin" co-amorphous supersaturating drug delivery systems: "Spring-parachute" process, stability, in vivo bioavailability, and underlying molecular mechanisms

Amorphous solid dispersions (ASD) are one of most commonly used supersaturating drug delivery systems (SDDS) to formulate insoluble active pharmaceutical ingredients. However, the development of polymer-guided stabilization of ASD systems faces many obstacles. To overcome these shortcomings, co-amorphous supersaturable formulations have emerged as an alternative formulation strategy for poorly soluble compounds. Noteworthily, current researches around co-amorphous system (CAS) are mostly focused on preparation and characterization of these systems, but more detailed investigations of their supersaturation ("spring-parachute" process), stability, in vivo bioavailability and molecular mechanisms are inadequate and need to be clarified. In present study, we chose pharmacological relevant BCS II drugs to fabricate and characterize "felodipine-indomethacin" CAS. To enrich the current inadequate but key knowledge on CAS studies, we carried out following highlighted investigations including dissolution/solubility, semi-continuous "spring-parachute" process, long-term stability profile of amorphous state, in vivo bioavailability and underlying molecular mechanisms (molecular interaction, molecular miscibility and crystallization inhibition). Generally, the research provides some key information in the field of current "drug-drug" CAS supersaturable formulations.

A novel crystalline molecular salt of sulfamethoxazole and amantadine hybridizing antiviral-antibacterial dual drugs with optimal in vitro/vivo pharmaceutical properties

In order to exploit the advantages to the full of multidrug salification strategy in amending the pharmaceutical properties of drugs both in vitro and in vivo, and further to open up a new way for its applications in bacteria-virus mixed cross-infection drugs, a novel dual-drug crystalline molecular salt hybridizing antibacterial drug sulfamethoxazole (SFM) with antiviral ingredient amantadine (ATE), namely SFM-ATE, is successfully designed and synthesized via multidrug salification strategy oriented by proton exchange reaction. The crystal structure of the firstly obtained molecular salt is precisely identified by employing single-crystal X-ray diffraction and multiple other techniques. The results show that, in the crystal lattice of molecular salt SFM-ATE, the classical hydrogen bonds together with charge-assisted hydrogen bonds contribute to two- dimensional networks, between which the hydrophobic interaction plays an important role. The relevant in vitro/vivo pharmaceutical properties of the dual-drug molecular salt are carried out through a comparative investigation of theoretical and experimental methods. It has been found that SFM displays concurrent improvements over the bulk drug in its permeability and dissolution after forming the molecular salt, which is supported by the molecular electrostatic potential calculation and Hirshfeld surface analysis. Encouragingly, the perfected in vitro biopharmaceutical properties can effectually turn into the in vivo pharmacokinetic preponderances with the expedited peak plasma concentration, lengthened half-life and enhanced bioavailability. Better yet, the antibacterial activities of SFM from the molecular salt get stronger with enlargement in inhibition areas and reduction in values of minimum inhibitory concentrations against the tested bacterial strains. Consequently, the present contribution not only supplies an opportunity for widening applications for classical sulfa drugs via dual-drug salification strategy, but also offers an alternative approach in dealing with viral-bacterial coinfection even other complex diseases by drugs' hybridization at the molecular level.

Development and characterization of lyophilized cefpodoxime proxetil-Pluronic® F127/polyvinylpyrrolidone K30 solid dispersions with improved dissolution and enhanced antibacterial activity

The aim of this study was the development of hard-cellulose capsules containing cefpodoxime proxetil (CEF) (BCS Class II) loaded novel Pluronic® F127 (P127)/Polyvinylpyrrolidone K30 (PVP) solid dispersions (SDs) using ultrasonic probe induced solvent-lyophilization method for effective antibacterial treatment by means of improved saturated aqueous solubility, dissolution rate, reduced particle size, and wettability. SDs were evaluated for physical and solid-state analyses. The solubility of pure CEF was calculated as 0.269 ± 0.005 mg/mL, SDs formulated with P127/PVP exhibited increased solubility from 3.5- to 8-fold. Molecular distribution of CEF in SDs and formation of CEF loaded amorphous polymeric network were confirmed with morphological study, thermal analysis, Fourier-transform infrared spectroscopy (FT-IR), and 1H-NMR studies. Staphylococcus aureus (ATCC 29213), Escherichia coli (ATCC 25922), and Klebsiella pneumoniae (ATCC 700603) were used to investigate the antibacterial effectiveness of the SDs. The minimum inhibitory concentration (MIC) values of the P127/PVP SDs were found 2-8 times lower than the pure CEF. All SDs from hard-cellulose capsules exhibited significantly faster release than unprocessed CEF. The profiles of SDs and reference were detected to be dissimilar according to difference (f1) and similarity factor (f2). Hard-cellulose capsules containing CEF loaded P127/PVP SDs appear to be feasible alternative to commercially available CEF tablets for effective antibacterial therapy at lowest dose.

Hydrogel-assisted delivery of lipophilic molecules into aqueous medium for transdermal medication based on environment-specific, regioselective adsorption of graphene oxides

Graphene oxide (GO)-laden agarose composite hydrogels (GOACHs) were utilized to deliver lipophilic molecules from organic to aqueous media without alteration of the lipophilic nature of the molecules and the hydrophilic nature of the GOACHs. After the agarose host networks of the GOACHs were impregnated with the non-polar organic solution of lipophilic molecules via stepwise solvent exchange, their GO guests wielded the edge polar groups to effectively adsorb the lipophilic molecules via hydrogen bonding. After being transferred to aqueous media, the GOACHs were able to not only release the loaded lipophilic molecules but also to adsorb the released lipophilic molecules on the GO non-polar carbon lattice planes via hydrophobic interactions, thus resulting in deliberately balanced release of lipophilic molecules in aqueous media. Based on this environment-specific, regioselective adsorption of their GO guests, the GOACHs were harnessed as carriers for sustained delivery of ibuprofen across rat skin, underpinning their applicability in transdermal medication.

Relevance of Liquid-Liquid Phase Separation of Supersaturated Solution in Oral Absorption of Albendazole from Amorphous Solid Dispersions

Amorphous solid dispersion (ASD) is one of the most promising formulation technologies for improving the oral absorption of poorly soluble drugs, where the maintenance of supersaturation plays a key role in enhancing the absorption process. However, quantitative prediction of oral absorption from ASDs is still difficult. Supersaturated solutions can cause liquid-liquid phase separation through the spinodal decomposition mechanism, which must be adequately comprehended to understand the oral absorption of drugs quantitatively. In this study, albendazole (ALZ) was formulated into ASDs using three types of polymers, poly(methacrylic acid-co-methyl methacrylate) (Eudragit) L100, Vinylpyrrolidone-vinyl acetate copolymer (PVPVA), and hydroxypropyl methylcellulose acetate succinate (HPMCAS). The oral absorption of ALZ in rats administered as ASD suspensions was not explained by dissolution study but was predicted using liquid-liquid phase separation concentration, which suggested that the absorption of ALZ was solubility-limited. The oral administration study in dogs performed using solid capsules demonstrated the low efficacy of ASDs because the absorption was likely to be limited by dissolution rate, which indicated the importance of designing the final dosage form of the ASDs.

Evaluation of Thermal-Induced Polymorphic Transformation on Desloratadine and Desloratadine-Benzoic Acid Salt

Background: Active pharmaceutical ingredients face a challenge in manufacturing due to adverse physicomechanical properties. Desloratadine (DES) form I exhibits poor mechanical behavior through the formation of capping during the tableting process. Salt formation from DES and benzoic acid (BA) has been observed to resolve poor mechanical properties. However, the ability to withstand heat from the manufacturing process should be implemented in DES and DES-BA salt. The aim of this study was to determine the differences between thermal treatment results on DES and DES-BA salt and whether it causes them to undergo polymorphic transformation. Methods: Salt was crystallized between DES and BA using the solvent evaporation method. DES and DES-BA salt were heated at 110°C, 159°C (melting point of DES), 181°C (melting point of DES-BA), and 190°C. Following this, characterization was performed using differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and solubility testing. Results: Polymorphic transformation caused by heat occurred in DES, but not in DES-BA salt. The transformation of DES was induced by the effect of heating, which changed polymorph I to a mixture of polymorph I and III at 110°C, to polymorph II at 159°C, and to a mixture of polymorph I, II, and III at 190°C. Under 190oC, DES-BA is still stable and did not undergo a polymorphic transformation. However, at 190oC, decomposition started to occur, which implied decreased solubility, which did not occur in DES. Conclusion: The heating process did not cause DES-BA salt to undergo a polymorphic transformation. However, it caused decomposition at 190oC. DES underwent a polymorphic transformation when exposed to the same condition without decomposition. This provided information to always pay attention to temperature during manufacturing processes that include DES or DES-BA salt to avoid physicochemical changes.

Orally administered self-emulsifying drug delivery system in disease management: advancement and patents

Introduction: Oral administration of a drug is the most common, ideal and preferred route of administration. The main problem of oral drug formulations is their low bioavailability arises from poor aqueous solubility of drug. Aqueous solubility of lipophilic drugs can be improved by various techniques like salt formation, complexation, addition of co-solvent etc. but self-emulsifying drug-delivery system (SEDDS) is getting more attention for increasing the solubility of such drugs. The SEDDS is an isotropic mixture of drug, lipids, and emulsifiers, usually with one or more hydrophilic co-solvents/co-emulsifiers. This system is having ability to generate oil-in-water (o/w) emulsions or microemulsions upon gentle agitation followed by dilution with aqueous phase. The SEDDSs are relatively newer, lipid-based technological innovations possessing unparalleled potential in improving oral bioavailability of poorly water-soluble drugs.Areas covered: This review provides updated information regarding the types of SEDDS, their preparation techniques, drug delivery and related recent patents along with marketed formulations.Expert opinion: The SEDDS has been explored for improving bioavailability, rising intra-subject heterogeneity, and increasing solubility. SEDDS offers the benefit of a protective effect against the hostile environment in the gut. The unique fabrication techniques provide specific strategy to overcome the low bioavailability and poor solubility problems.

Pharmaceutical cocrystal: a game changing approach for the administration of old drugs in new crystalline form

Pharmaceutical cocrystals are still gaining the interest of the researchers due to their potential to alter physicochemical, mechanical, and pharmacokinetic properties of active pharmaceutical ingredients without negotiating therapeutic action. The diverse new applications of cocrystals, like taste masking, reduced toxicity, patenting opportunities, commercial potential, etc. act as driving force to the rising interest of the pharmaceutical industries. Initially, cocrystals from the view of regulatory authorities, design strategies, cocrystal preparation in brief with special emphasis on scalable and solvent-free hot melt extrusion method, and practical guide to characterization have been provided. The special focus has been given to the biopharmaceutical attributes of the cocrystal. Finally, challenges before and after cocrystal preparation are presented in this review along with some commercial examples of the cocrystals.

(Sub)micron particles forming in aqueous dispersions of amorphous solid dispersions of the poorly soluble drug ABT-199: A combined particle optical counting and field-flow fractionation study

The dispersive behavior of three different amorphous solid dispersion (ASD) formulations of the poorly soluble ABT-199 (Venetoclax) were studied in aqueous and biomimetic media and spontaneously forming supramolecular associates and particles analysed. To this end, the aqueous dispersions were fractionated into a submicron (colloidal) and micrometer-sized particle-fraction by bench-top centrifugation. The submicron fraction was characterized by Asymmetric Flow Field-Flow Fractionation in conjunction with Multi-angle Laser Light Scattering (AF4-MALLS), Dynamic Light Scattering (DLS) and zeta potential analysis. The micron particle fraction was characterized by Single Particle Optical Sensing (SPOS) and light microscopy. Furthermore, drug contents were monitored in terms of total dispersed drug and apparently dissolved drug in the submicron fraction. Despite the fact, that all three formulations showed decent dispersive behavior with almost the complete drug content rapidly dispersed, substantial differences were identified between two of the formulations and the third one: ABT-199/12 and ABT-199/20 showed pronounced precipitation of the drug in form of micrometer particles, a phenomenon described as glass liquid phase separation (GLPS) and only a marginal fraction of the drug was found in the submicron-fraction, i.e. associated with 3 to 4 different supramolecular assemblies (micelles), irrespective whether buffer or fasted state simulated intestinal fluid (FaSSIF) were used as dispersion media. In contrast, ABT-199/40 showed pronounced formation of a wide variety of supramolecular assemblies (micelles) along with substantial association of the drug with all of these, but reduced glass liquid phase separation.

Degrees of order: A comparison of nanocrystal and amorphous solids for poorly soluble drugs

Poor aqueous solubility is currently a prevalent issue in the development of small molecule pharmaceuticals. Several methods are possible for improving the solubility, dissolution rate and bioavailability of Biopharmaceutics Classification System (BCS) class II and class IV drugs. Two solid state approaches, which rely on reductions in order, and can theoretically be applied to all molecules without any specific chemical prerequisites (compared with e.g. ionizable or co-former groups, or sufficient lipophilicity), are the use of the amorphous form and nanocrystals. Research involving these two approaches is relatively extensive and commercial products are now available based on these technologies. Nevertheless, their formulation remains more challenging than with conventional dosage forms. This article describes these two technologies from both theoretical and practical perspectives by briefly discussing the physicochemical backgrounds behind these approaches, as well as the resulting practical implications, both positive and negative. Case studies demonstrating the benefits and challenges of these two techniques are presented.

Quantitative Evaluation of the Crystallinity of Indomethacin Using 1H T2 Relaxation Behaviors Measured by Time Domain NMR

We sought to demonstrate the usefulness of the T₂ relaxation behaviors measured by time domain NMR (TD-NMR) for the quantitative evaluation of the crystallinity of an active pharmaceutical ingredient (API). This study used indomethacin as a model API. After blending amorphous and crystalline indomethacin powders at a designated ratio, T₂ relaxation curves were measured by TD-NMR. Subsequently, we acquired a calibration curve to quantify crystallinity by curve fitting analysis. Validation demonstrated a good correlation between the theoretical and experimental percentage of crystallinity. Thus, this study succeeded in a precise estimation of crystallinity of indomethacin using TD-NMR. We also investigated whether the technique is practical by testing indomethacin powders with unknown proportion of crystallinity, and then compared their estimated crystallinity with that found using conventional evaluation techniques. The quantitative performance of the TD-NMR technique was comparable to that of Raman spectroscopy. Furthermore, indomethacin powder blended with excipients, which can be used to produce tablets, was tested. The TD-NMR technique was still able to quantify the crystallinity of indomethacin, even when excipients were incorporated into the sample. Therefore, the present study expands the horizon for evaluating the crystallinity of APIs in pharmaceutical sciences.

Importance of Mesoporous Silica Particle Size in the Stabilization of Amorphous Pharmaceuticals-The Case of Simvastatin

In this paper, the role of mesoporous silica (MS) particle size in the stabilization of amorphous simvastatin (SVT) is revealed. For inhibiting recrystallization of the supercooled drug, the two MS materials (Syloid® XDP 3050 and Syloid® 244 FP) were employed. The crystallization tendency of SVT alone and in mixture with the MS materials was investigated by Differential Scanning Calorimetry (DSC) and Broadband Dielectric Spectroscopy (BDS). Neither confinement of the SVT molecules inside the MS pores nor molecular interactions between functional groups of the SVT molecules and the surface of the stabilizing excipient could explain the observed stabilization effect. The stabilization effect might be correlated with diffusion length of the SVT molecules in the MS materials that depended on the particle size. Moreover, MS materials possessing different particle sizes could offer free spaces with different sizes, which might influence crystal growth of SVT. All of these factors must be considered when mesoporous materials are used for stabilizing pharmaceutical glasses.

Improving solubility and oral bioavailability of a novel antimalarial prodrug: comparing spray-dried dispersions with self-emulsifying drug delivery systems

To improve the solubility and oral bioavailability of a novel antimalarial agent ELQ-331(a prodrug of ELQ-300), spray-dried dispersions (SDD) and a self-emulsifying drug delivery system (SEDDS) were developed. SDD were prepared with polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus^®) polymer carrier and Aeroperl^® 300 Pharma and characterized by differential scanning calorimetry, powder X-ray diffraction. For SEDDS, solubility in oils, surfactants, and co-surfactants was determined and ternary phase diagram was constructed to show self-emulsifying area. SEDDS were characterized for spontaneous emulsification and droplet size distribution. The amorphous ELQ-331 SDD improved the solubility to 10× in fast-state simulated intestinal fluid and addition of sodium lauryl sulphate externally to SDDs further improved the solubility to ∼28.5× versus non-formulated drug. SEDDS had good self-emulsifying characteristics with small emulsion droplet sizes and narrow particle distribution. Oral pharmacokinetic studies for SDD and SEDDS formulations were performed in rats. The ELQ-331 rapidly converted to ELQ-300 soon after oral administration in rats. Exposure levels of ELQ-300 were about 1.4-fold higher (based on AUC) in SEDDS than SDD formulations. Poorly soluble drugs like ELQ-331 can be formulated using SDD or SEDDS to improve solubility and oral bioavailability.

Identification and investigation of the vibrational properties of crystalline and co-amorphous drugs with Raman and terahertz spectroscopy

Co-amorphous drugs have shown significant potential in improving the stability and bioavailability compared with single neat amorphous drugs. Here, we explored the molecular interactions of cimetidine, naproxen, indomethacin and their binary co-amorphous mixtures via Raman and terahertz (THz) spectroscopy. We used quench-cooled method to prepare the neat amorphous drugs and their binary co-amorphous mixtures and tested their thermodynamic properties through differential scanning calorimetry (DSC). Then, we found that the stability of co-amorphous drugs was stronger than their neat amorphous components. Furthermore, Raman spectroscopy was used to characterize the vibrational modes between different co-amorphous drugs. Generally, we found that the stability of co-amorphous drugs was better than their neat amorphous components for these samples we tested. Meanwhile, we complemented the detection of THz spectroscopy and found that crystalline and amorphous drugs could be better distinguished.

Herb-Induced Liver Injury: Phylogenetic Relationship, Structure-Toxicity Relationship, and Herb-Ingredient Network Analysis

Currently, hundreds of herbal products with potential hepatotoxicity were available in the literature. A comprehensive summary and analysis focused on these potential hepatotoxic herbal products may assist in understanding herb-induced liver injury (HILI). In this work, we collected 335 hepatotoxic medicinal plants, 296 hepatotoxic ingredients, and 584 hepatoprotective ingredients through a systematic literature retrieval. Then we analyzed these data from the perspectives of phylogenetic relationship and structure-toxicity relationship. Phylogenetic analysis indicated that hepatotoxic medicinal plants tended to have a closer taxonomic relationship. By investigating the structures of the hepatotoxic ingredients, we found that alkaloids and terpenoids were the two major groups of hepatotoxicity. We also identified eight major skeletons of hepatotoxicity and reviewed their hepatotoxic mechanisms. Additionally, 15 structural alerts (SAs) for hepatotoxicity were identified based on SARpy software. These SAs will help to estimate the hepatotoxic risk of ingredients from herbs. Finally, a herb-ingredient network was constructed by integrating multiple datasets, which will assist to identify the hepatotoxic ingredients of herb/herb-formula quickly. In summary, a systemic analysis focused on HILI was conducted which will not only assist to identify the toxic molecular basis of hepatotoxic herbs but also contribute to decipher the mechanisms of HILI.

Successful oral delivery of poorly water-soluble drugs both depends on the intraluminal behavior of drugs and of appropriate advanced drug delivery systems

Poorly water-soluble drugs continue to be a problematic, yet important class of pharmaceutical compounds for treatment of a wide range of diseases. Their prevalence in discovery is still high, and their development is usually limited by our lack of a complete understanding of how the complex chemical, physiological and biochemical processes that occur between administration and absorption individually and together impact on bioavailability. This review defines the challenge presented by these drugs, outlines contemporary strategies to solve this challenge, and consequent in silico and in vitro evaluation of the delivery technologies for poorly water-soluble drugs. The next steps and unmet needs are proposed to present a roadmap for future studies for the field to consider enabling progress in delivery of poorly water-soluble compounds.

Ultraslow Cooling for the Stabilization of Pharmaceutical Glasses

Stabilization technology of glass structures is of great interest in the field of pharmaceutical science, as it may prevent poorly soluble candidate compounds from dropping out of the pipeline. Cooling rate from the melt has been recognized as one parameter to alter the energy state of the glass; however, the relationship between the physicochemical properties of glass and stabilization efficiency of the cooling rate has not been clarified yet. We have investigated the effect of cooling rate on the thermodynamic parameters of 13 pharmaceutical glasses, to find features of the compounds that are closely related to the stabilization efficiency. We have also analyzed the structural differences between slowly cooled and annealed glasses based on Fourier-transform infrared spectra and relaxation enthalpy. Although the degree of stabilization was lower for slowly cooled glasses compared to that for vapor-deposited ones, slow cooling was found to be a prominent method for producing stable glass and is applicable to bulk materials. In this observation, a strong correlation between fragility and the number of rotatable bonds was also found.

Crystallization Tendency of Pharmaceutical Glasses: Relevance to Compound Properties, Impact of Formulation Process, and Implications for Design of Amorphous Solid Dispersions

Amorphous solid dispersions (ASDs) are important formulation strategies for improving the dissolution process and oral bioavailability of poorly soluble drugs. Physical stability of a candidate drug must be clearly understood to design ASDs with superior properties. The crystallization tendency of small organics is frequently estimated by applying rapid cooling or a cooling/reheating cycle to their melt using differential scanning calorimetry. The crystallization tendency determined in this way does not directly correlate with the physical stability during isothermal storage, which is of great interest to pharmaceutical researchers. Nevertheless, it provides important insights into strategy for the formulation design and the crystallization mechanism of the drug molecules. The initiation time for isothermal crystallization can be explained using the ratio of the glass transition and storage temperatures (T_g/T). Although some formulation processes such as milling and compaction can enhance nucleation, the T_g/T ratio still works for roughly predicting the crystallization behavior. Thus, design of accelerated physical stability test may be possible for ASDs. The crystallization tendency during the formulation process and the supersaturation ability of ASDs may also be related to the crystallization tendency determined by thermal analysis. In this review, the assessment of the crystallization tendency of pharmaceutical glasses and its relevance to developmental studies of ASDs are discussed.