How to design the surface of peptide-loaded nanoparticles for efficient oral bioavailability?

Data-driven development of an oral lipid-based nanoparticle formulation of a hydrophobic drug

Due to its cost-effectiveness, convenience, and high patient adherence, oral drug administration normally remains the preferred approach. Yet, the effective delivery of hydrophobic drugs via the oral route is often hindered by their limited water solubility and first-pass metabolism. To mitigate these challenges, advanced delivery systems such as solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) have been developed to encapsulate hydrophobic drugs and enhance their bioavailability. However, traditional design methodologies for these complex formulations often present intricate challenges because they are restricted to a relatively narrow design space. Here, we present a data-driven approach for the accelerated design of SLNs/NLCs encapsulating a model hydrophobic drug, cannabidiol, that combines experimental automation and machine learning. A small subset of formulations, comprising 10% of all formulations in the design space, was prepared in-house, leveraging miniaturized experimental automation to improve throughput and decrease the quantity of drug and materials required. Machine learning models were then trained on the data generated from these formulations and used to predict properties of all SLNs/NLCs within this design space (i.e., 1215 formulations). Notably, formulations predicted to be high-performers via this approach were confirmed to significantly enhance the solubility of the drug by up to 3000-fold and prevented degradation of drug. Moreover, the high-performance formulations significantly enhanced the oral bioavailability of the drug compared to both its free form and an over-the-counter version. Furthermore, this bioavailability matched that of a formulation equivalent in composition to the FDA-approved product, Epidiolex®.

Recent Advancements in the Development of Nanocarriers for Mucosal Drug Delivery Systems to Control Oral Absorption

Oral administration of active pharmaceutical ingredients is desirable because it is easy, safe, painless, and can be performed by patients, resulting in good medication adherence. The mucus layer in the gastrointestinal (GI) tract generally acts as a barrier to protect the epithelial membrane from foreign substances; however, in the absorption process after oral administration, it can also disturb effective drug absorption by trapping it in the biological sieve structured by mucin, a major component of mucus, and eliminating it by mucus turnover. Recently, functional nanocarriers (NCs) have attracted much attention due to their immense potential and effectiveness in the field of oral drug delivery. Among them, NCs with mucopenetrating and mucoadhesive properties are promising dosage options for controlling drug absorption from the GI tracts. Mucopenetrating and mucoadhesive NCs can rapidly deliver encapsulated drugs to the absorption site and/or prolong the residence time of NCs close to the absorption membrane, providing better medications than conventional approaches. The surface characteristics of NCs are important factors that determine their functionality, owing to the formation of various kinds of interactions between the particle surface and mucosal components. Thus, a deeper understanding of surface modifications on the biopharmaceutical characteristics of NCs is necessary to develop the appropriate mucosal drug delivery systems (mDDS) for the treatment of target diseases. This review summarizes the basic information and functions of the mucosal layer, highlights the recent progress in designing functional NCs for mDDS, and discusses their performance in the GI tract.

Polysaccharide-based nanoassemblies: From synthesis methodologies and industrial applications to future prospects

Polysaccharides, due to their remarkable features, have gained significant prominence in the sustainable production of nanoparticles (NPs). High market demand and minimal production cost, compared to the chemically synthesised NPs, demonstrate a drive towards polysaccharide-based nanoparticles (PSNPs) benign to environment. Various approaches are used for the synthesis of PSNPs including cross-linking, polyelectrolyte complexation, and self-assembly. PSNPs have the potential to replace a wide diversity of chemical-based agents within the food, health, medical and pharmacy sectors. Nevertheless, the considerable challenges associated with optimising the characteristics of PSNPs to meet specific targeting applications are of utmost importance. This review provides a detailed compilation of recent accomplishments in the synthesis of PSNPs, the fundamental principles and critical factors that govern their rational fabrication, as well as various characterisation techniques. Noteworthy, the multiple use of PSNPs in different disciplines such as biomedical, cosmetics agrochemicals, energy storage, water detoxification, and food-related realms, is accounted in detail. Insights into the toxicological impacts of the PSNPs and their possible risks to human health are addressed, and efforts made in terms of PSNPs development and optimising strategies that allow for enhanced delivery are highlighted. Finally, limitations, potential drawbacks, market diffusion, economic viability and future possibilities for PSNPs to achieve widespread commercial use are also discussed.

Progress and prospects of polysaccharide-based nanocarriers for oral delivery of proteins/peptides

The oral route has long been recognized as the most preferred route for drug delivery as it offers high patient compliance and requires minimal expertise. Unlike small molecule drugs, the harsh environment of the gastrointestinal tract and low permeability across the intestinal epithelium make oral delivery extremely ineffective for macromolecules. Accordingly, delivery systems that are rationally constructed with suitable materials to overcome barriers to oral delivery are exceptionally promising. Among the most ideal materials are polysaccharides. Depending on the interaction between polysaccharides and proteins, the thermodynamic loading and release of proteins in the aqueous phase can be realized. Specific polysaccharides (dextran, chitosan, alginate, cellulose, etc.) endow systems with functional properties, including muco-adhesiveness, pH-responsiveness, and prevention of enzymatic degradation. Furthermore, multiple groups in polysaccharides can be modified, which gives them a variety of properties and enables them to suit specific needs. This review provides an overview of different types of polysaccharide-based nanocarriers based on different kinds of interaction forces and the influencing factors in the construction of polysaccharide-based nanocarriers. Strategies of polysaccharide-based nanocarriers to improve the bioavailability of orally administered proteins/peptides were described. Additionally, current restrictions and future trends of polysaccharide-based nanocarriers for oral delivery of proteins/peptides were also covered.

Physicochemical Properties and Antiherpetic Activity of κ-Carrageenan Complex with Chitosan

Nanoparticles formation is one of the ways to modulate the physicochemical properties and enhance the activity of original polysaccharides. For this purpose, based on the polysaccharide of red algae, κ-carrageenan (κ-CRG), it polyelectrolyte complex (PEC), with chitosan, were obtained. The complex formation was confirmed by ultracentrifugation in a Percoll gradient, with dynamic light scattering. According to electron microscopy and DLS, PEC is dense spherical particles with sizes in the range of 150-250 nm. A decrease in the polydispersity of the initial CRG was detected after the PEC formation. Simultaneous exposure of Vero cells with the studied compounds and herpes simplex virus type 1 (HSV-1) showed that the PEC exhibited significant antiviral activity, effectively inhibiting the early stages of virus-cell interaction. A two-fold increase in the antiherpetic activity (selective index) of PEC compared to κ-CRG was shown, which may be due to a change in the physicochemical characteristics of κ-CRG in PEC.

Improvement of Therapeutic Value of Quercetin with Chitosan Nanoparticle Delivery Systems and Potential Applications

This paper reviews recent studies investigating chitosan nanoparticles as drug delivery systems for quercetin. The therapeutic properties of quercetin include antioxidant, antibacterial and anti-cancer potential, but its therapeutic value is limited by its hydrophobic nature, low bioavailability and fast metabolism. Quercetin may also act synergistically with other stronger drugs for specific disease states. The encapsulation of quercetin in nanoparticles may increase its therapeutic value. Chitosan nanoparticles are a popular candidate in preliminary research, but the complex nature of chitosan makes standardisation difficult. Recent studies have used in-vitro, and in-vivo experiments to study the delivery of quercetin alone or in combination with another active pharmaceutical ingredient encapsulated in chitosan nanoparticles. These studies were compared with the administration of non-encapsulated quercetin formulation. Results suggest that encapsulated nanoparticle formulations are better. In-vivo or animal models simulated the type of disease required to be treated. The types of diseases were breast, lung, liver and colon cancers, mechanical and UVB-induced skin damage, cataracts and general oxidative stress. The reviewed studies included various routes of administration: oral, intravenous and transdermal routes. Although toxicity tests were often included, it is believed that the toxicity of loaded nanoparticles needs to be further researched, especially when not orally administered.

Low Surface Accessible Area NanoCoral TiO2 for the Reduction of Foreign Body Reaction During Implantation

The entry of implants triggers the secretion of damage associated molecular patterns (DAMPs) that recruit dendritic cells (DCs) and results in subsequent foreign body reaction (FBR). Though several studies have illustrated that the surface accessible area (SAA) of implants plays a key role in the process of DAMPs release and absorption, the effect of SAA on the immune reaction still remains unknown. Here, a series of TiO2 plates with different SAA is fabricated to investigate the relationship between SAA and FBR. Compared with larger SAA surface, the aggregation of DC is significantly inhibited by lower SAA surface. Total internal reflection microscopy (TIRFM) and molecular dynamic (MD) simulation show that although high mobility group box 1 (HMGB1) is adsorbed more on plates with lower SAA, the exposure ratio of cysteine (CYS) residue in HMGB1 is significantly decreased in lower SAA group. The lower exposure of CYS reduces the activation of Toll-like receptors 4 (TLR4), which down-regulates the expression of myeloid differentiation factor (Myd88)-TNF receptor associated factor 6 (TRAF6) to inhibit nuclear factor kappa B (NF-κB) signaling. Generally, this study reveals the mechanism of how SAA, a nanoscale property, affects FBR from perspective of DAMPs, and provides a new direction for designing better biocompatible implants.

Add Sugar to Chitosan: Mucoadhesion and In Vitro Intestinal Permeability of Mannosylated Chitosan Nanocarriers

Crosslinked chitosan nanocarriers (140–160 nm) entrapping coumarin-6 (λ_ex/em = 455/508 nm) with or without surface mannosylation were synthesized and assessed for cytotoxicity, adherence and cellular uptake in Caco-2 cells, flux across Caco-2 monolayers, and mucoadhesion to porcine mucin. Mannosylated and non-mannosylated nanocarriers demonstrated biocompatibility with slow release of coumarin-6 at pH 6.8 and 7.4 over 24 h. Adherence of the non-mannosylated nanocarriers (50 and 150 µg/mL) to Caco-2 cells was ~10% over 24 h, whereas cellular uptake of 25–30% was noted at 4 h. The mannosylated nanocarriers showed a similar adherence to non-mannosylated nanocarriers after 24 h, but a lower cellular uptake (~20%) at 1 h, comparable uptake at 4 h, and a higher uptake (~25–30%) at 24 h. Overall, the nanocarriers did not affect the integrity of Caco-2 monolayers. Mannosylated nanocarriers elicited higher P_app of 1.6 × 10⁻⁶ cm/s (50 µg/mL) and 1.2 × 10⁻⁶ (150 µg/mL) than the non-mannosylated ones: 9.8 × 10⁻⁷ cm/s (50 µg/mL) and 1.0 × 10⁻⁶ (150 µg/mL) after 2 h. Non-mannosylated chitosan nanocarriers elicited enhanced adhesion to porcine gut mucin via mucin-filled microchannels due to higher cationic charge density. These results underpin the importance of surface chemistry in the biological interactions of nanocarriers, while highlighting the role of surface hydrophilicity in mucopermeation due to mannosylation.

Foundations of gastrointestinal-based drug delivery and future developments

Gastrointestinal-based drug delivery is considered the preferred mode of drug administration owing to its convenience for patients, which improves adherence. However, unique characteristics of the gastrointestinal tract (such as the digestive environment and constraints on transport across the gastrointestinal mucosa) limit the absorption of drugs. As a result, many medications, in particular biologics, still exist only or predominantly in injectable form. In this Review, we examine the fundamentals of gastrointestinal drug delivery to inform clinicians and pharmaceutical scientists. We discuss general principles, including the challenges that need to be overcome for successful drug formulation, and describe the unique features to consider for each gastrointestinal compartment when designing drug formulations for topical and systemic applications. We then discuss emerging technologies that seek to address remaining obstacles to successful gastrointestinal-based drug delivery.

Molecular Descriptors as a Facile Tool toward Designing Surface-Functionalized Nanoparticles for Drug Delivery

Modulating the surface chemistry of nanoparticles, often by grafting hydrophilic polymer brushes (e.g., polyethylene glycol) to prepare nanoformulations that can resist opsonization in a hematic environment and negotiate with the mucus barrier, is a popular strategy toward developing biocompatible and effective nano-drug delivery systems. However, there is a need for tools that can screen multiple surface ligands and cluster them based on both structural similarity and physicochemical attributes. Molecular descriptors offer numerical readouts based on molecular properties and provide a fertile ground for developing quick screening platforms. Thus, a study was conducted with 14 monomers/repeating blocks of polymeric chains, namely, oxazoline, acrylamide, vinylpyrrolidone, glycerol, acryloyl morpholine, dimethyl acrylamide, hydroxypropyl methacrylamide, hydroxyethyl methacrylamide, sialic acid, carboxybetaine acrylamide, carboxybetaine methacrylate, sulfobetaine methacrylate, methacryloyloxyethyl phosphorylcholine, and vinyl-pyridinio propanesulfonate, capable of imparting hydrophilicity to a surface when assembled as polymeric brushes. Employing free, Web-based, and user-friendly platforms, such as SwissADME and ChemMine tools, a series of molecular descriptors and Tanimoto coefficient of molecular pairs were determined, followed by hierarchical clustering analyses. Molecular pairs of oxazoline/dimethyl acrylamide, hydroxypropyl methacrylamide/hydroxyethyl methacrylamide, acrylamide/glycerol, carboxybetaine acrylamide/vinyl-pyridinio propanesulfonate, and sulfobetaine methacrylate/methacryloyloxyethyl phosphorylcholine were clustered together. Similarly, the molecular pair of hydroxypropyl methacrylamide/hydroxyethyl methacrylamide demonstrated a high Tanimoto coefficient of >0.9, whereas the pairs oxazoline/vinylpyrrolidone, acrylamide/dimethyl acrylamide, acryloyl morpholine/dimethyl acrylamide, acryloyl morpholine/hydroxypropyl methacrylamide, acryloyl morpholine/hydroxyethyl methacrylamide, carboxybetaine methacrylate/sulfobetaine methacrylate, and glycerol/hydroxypropyl methacrylamide had a Tanimoto coefficient of >0.8. The analyzed data not only demonstrated the ability of such in silico tools as a facile technique in clustering molecules of interest based on their structure and physicochemical characteristics but also provided vital information on their behavior within biological systems, including the ability to engage an array of possible molecular targets when the monomers are self-assembled on nanoparticulate surfaces.

Efficient oral insulin delivery enabled by transferrin-coated acid-resistant metal-organic framework nanoparticles

Oral protein delivery is considered a cutting-edge technology to improve patients' quality of life, offering superior patient compliance and convenience compared with injections. However, oral protein formulation has stagnated because of the instability and inefficient penetration of protein in the gastrointestinal tract. Here, we used acid-resistant metal-organic framework nanoparticles (UiO-68-NH₂) to encapsulate sufficient insulin and decorated the exterior with targeting proteins (transferrin) to realize highly efficient oral insulin delivery. The UiO-68-NH₂ nanocarrier with proper pore size achieved high insulin loading while protecting insulin from acid and enzymatic degradation. Through receptor-mediated transcellular pathway, the transferrin-coated nanoparticles realized efficient transport across the intestinal epithelium and controlled insulin release under physiological conditions, leading to a notable hypoglycemic effect and a high oral bioavailability of 29.6%. Our work demonstrates that functional metal-organic framework nanoparticles can protect proteins from the gastric environment and overcome the intestinal barrier, thus providing the possibility for oral biomacromolecule delivery.

Drug Delivery Systems for the Oral Administration of Antimicrobial Peptides: Promising Tools to Treat Infectious Diseases

Antimicrobial peptides (AMPs) have a great potential to face the global expansion of antimicrobial resistance (AMR) associated to the development of multidrug-resistant (MDR) pathogens. AMPs are usually composed of 10–50 amino acids with a broad structural diversity and present a range of antimicrobial activities. Unfortunately, even if the oral route is the most convenient one, currently approved therapeutic AMPs are mostly administrated by the intravenous route. Thus, the development of novel drug delivery systems (DDSs) represents a promising opportunity to protect AMPs from chemical and enzymatic degradation through the gastrointestinal tract and to increase intestinal permeability leading to high bioavailability. In this review, the classification and properties as well as mechanisms of the AMPs used in infectiology are first described. Then, the different pharmaceutical forms existing in the market for oral administration are presented. Finally, the formulation technologies, including microparticle- and nanoparticle-based DDSs, used to improve the oral bioavailability of AMPs are reviewed.

Recent Advancement in Chitosan-Based Nanoparticles for Improved Oral Bioavailability and Bioactivity of Phytochemicals: Challenges and Perspectives

The excellent therapeutic potential of a variety of phytochemicals in different diseases has been proven by extensive studies throughout history. However, most phytochemicals are characterized by a high molecular weight, poor aqueous solubility, limited gastrointestinal permeability, extensive pre-systemic metabolism, and poor stability in the harsh gastrointestinal milieu. Therefore, loading of these phytochemicals in biodegradable and biocompatible nanoparticles (NPs) might be an effective approach to improve their bioactivity. Different nanocarrier systems have been developed in recent decades to deliver phytochemicals. Among them, NPs based on chitosan (CS) (CS-NPs), a mucoadhesive, non-toxic, and biodegradable polysaccharide, are considered the best nanoplatform for the oral delivery of phytochemicals. This review highlights the oral delivery of natural products, i.e., phytochemicals, encapsulated in NPs prepared from a natural polymer, i.e., CS, for improved bioavailability and bioactivity. The unique properties of CS for oral delivery such as its mucoadhesiveness, non-toxicity, excellent stability in the harsh environment of the GIT, good solubility in slightly acidic and alkaline conditions, and ability to enhance intestinal permeability are discussed first, and then the outcomes of various phytochemical-loaded CS-NPs after oral administration are discussed in detail. Furthermore, different challenges associated with the oral delivery of phytochemicals with CS-NPs and future directions are also discussed.

Mucoadhesive versus mucopenetrating nanoparticles for oral delivery of insulin

Mucoadhesive and mucopenetrating nanoparticles are commonly designed to improve mucosal drug delivery efficiency. Herein, in order to better understand the contribution of mucoadhesion and mucopenetration in oral delivery of biomacromolecules, insulin-loaded poly (n-butylcyanoacrylate) nanoparticles (Ins/PBCA NPs) with different coating layers, chitosan (CS) or alginate (Alg), were designed and their different absorption enhancing mechanisms were explored. It was demonstrated that both the mucoadhesive (Ins/PBCA/CS) and the mucopenetrating (Ins/PBCA/CS/Alg) nanoparticles showed good stability and similar release profiles in the gastrointestinal fluid, the mucoadhesive nanoparticles presented an enrichment in mucus (70%, 10 min) while most of the mucopenetrating nanoparticles penetrated through the mucus (80%, 10 min). Uptake mechanism studies revealed clathrin- and caveolae-mediated endocytosis were mainly involved in the intestinal transport of mucoadhesive nanoparticles while caveolae-mediated endocytosis and macropinocytosis contributed to the absorption of mucopenetrating nanoparticles, and especially, M cells favored the absorption of mucoadhesive nanoparticles. In vivo studies revealed that the mucopenetrating nanoparticles had a fast onset of action while the mucoadhesive nanoparticles presented a sustained hypoglycemic effect in diabetic rats, and overall no significant difference in pharmacological availability was found between the mucopenetrating (8.80%) and mucoadhesive nanoparticles (8.44%). To sum up, due to the varied absorption mechanism in intestine, the mucoadhesive nanoparticles designed herein had a comparable effect in enhancing oral insulin absorption compared with the mucopenetrating nanoparticles. STATEMENT OF SIGNIFICANCE: In order to improve oral delivery efficiency of insulin, insulin-loaded nanoparticles with opposite properties namely mucoadhesion and mucopenetration have been widely developed to either prolong their residence at the absorption site or improve their penetration across mucus. However, their individual contribution in oral insulin absorption is still unclear. In this paper, insulin-loaded poly (n-butylcyanoacrylate) nanoparticles with both properties were designed via different surface coating and their absorption enhancing mechanisms were explored. It was demonstrated that the mucoadhesive and mucopenetrating nanoparticles showed varied retention and mucus-penetration ability in mucus, with different absorption mechanism in intestine, but no statistical difference in pharmacological availability was found between them. Overall, the present work provides us a guidance for the design of oral nano-delivery system.

Advances in Chitosan-Based Nanoparticles for Drug Delivery

Nanoparticles (NPs) have an outstanding position in pharmaceutical, biological, and medical disciplines. Polymeric NPs based on chitosan (CS) can act as excellent drug carriers because of some intrinsic beneficial properties including biocompatibility, biodegradability, non-toxicity, bioactivity, easy preparation, and targeting specificity. Drug transport and release from CS-based particulate systems depend on the extent of cross-linking, morphology, size, and density of the particulate system, as well as physicochemical properties of the drug. All these aspects have to be considered when developing new CS-based NPs as potential drug delivery systems. This comprehensive review is summarizing and discussing recent advances in CS-based NPs being developed and examined for drug delivery. From this point of view, an enhancement of CS properties by its modification is presented. An enhancement in drug delivery by CS NPs is discussed in detail focusing on (i) a brief summarization of basic characteristics of CS NPs, (ii) a categorization of preparation procedures used for CS NPs involving also recent improvements in production schemes of conventional as well as novel CS NPs, (iii) a categorization and evaluation of CS-based-nanocomposites involving their production schemes with organic polymers and inorganic material, and (iv) very recent implementations of CS NPs and nanocomposites in drug delivery.

Nanostructured Lipid Carriers (NLCs) for Oral Peptide Drug Delivery: About the Impact of Surface Decoration

This study was aimed to evaluate the impact of surfactants used for nanostructured lipid carriers (NLCs) to provide enzymatic protection for incorporated peptides. Insulin as a model peptide was ion paired with sodium dodecyl sulfate to improve its lipophilicity. Three NLC formulations containing polyethylene glycol ester (PEG-ester), polyethylene glycol ether (PEG-ether), and polyglycerol ester (PG-ester) surfactants were prepared by solvent diffusion method. NLCs were characterized regarding particle size, polydispersity index, and zeta potential. Biocompatibility of NLCs was assessed on Caco-2 cells via resazurin assay. In vitro lipolysis study was performed using a standard lipid digestion method. Proteolytic studies were performed in simulated gastric fluid containing pepsin and simulated intestinal fluid containing pancreatin. Lipophilicity of insulin in terms of log Poctanol/water was improved from -1.8 to 2.1. NLCs were in the size range of 64-217 nm with a polydispersity index of 0.2-0.5 and exhibited a negative surface charge. PG-ester NLCs were non-cytotoxic up to a concentration of 0.5%, PEG-ester NLCs up to a concentration of 0.25% and PEG-ether NLC up to a concentration of 0.125% (w/v). The lipolysis study showed the release of >90%, 70%, and 10% of free fatty acids from PEG-ester, PG-ester, and PEG-ether NLCs, respectively. Proteolysis results revealed the highest protective effect of PEG-ether NLCs followed by PG-ester and PEG-ester NLCs for incorporated insulin complex. Findings suggest that NLCs bearing substructures less susceptible to degrading enzymes on their surface can provide higher protection for incorporated peptides toward gastrointestinal proteases.

Polysaccharide-Based Nanoparticles for Colon-Targeted Drug Delivery Systems

Polysaccharide biomaterials have gained significant importance in the manufacture of nanoparticles used in colon-targeted drug delivery systems. These systems are a form of non-invasive oral therapy used in the treatment of various diseases. To achieve successful colonic delivery, the chemical, enzymatic and mucoadhesive barriers within the gastrointestinal (GI) tract must be analyzed. This will allow for the nanomaterials to cross these barriers and reach the colon. This review provides information on the development of nanoparticles made from various polysaccharides, which can overcome multiple barriers along the GI tract and affect encapsulation efficiency, drug protection, and release mechanisms upon arrival in the colon. Also, there is information disclosed about the size of the nanoparticles that are usually involved in the mechanisms of diffusion through the barriers in the GI tract, which may influence early drug degradation and release in the digestive tract.

A systematic review of functionalized polymeric nanoparticles to improve intestinal permeability of drugs and biological products

BACKGROUND

The oral route is the most frequently used and the most convenient route of drug administration, since it has several advantages, such as ease of use, patient compliance and better cost-effectiveness. However, physicochemical and biopharmaceutical limitations of various active pharmaceutical ingredients (API) hinder suitability for this route, including degradation in the gastrointestinal tract, low intestinal permeability and low bioavailability. To overcome these problems, while maintaining therapeutic efficacy, polymeric nanoparticles have attracted considerable attention for their ability to increase drug solubility, promote controlled release, and improve stability. In addition, the functionalization of nanocarriers can increase uptake and accumulation at the target site of action, and intestinal absorption, making it possible to obtain more viable, safe and efficient treatments for oral administration. <P> Objective: This systematic review aimed to seek recent advances in the literature on the use of polymeric nanoparticles functionalization to increase intestinal permeability of APIs that are intended for oral administration. <P> Method: Two bibliographic databases were consulted (PubMed and ScienceDirect). The selected publications and the writing of this systematic review were based on the guidelines mentioned in the PRISMA statement. <P> Results: Out of a total of 3036 studies, 22 studies were included in this article based on our eligibility criteria. The results were consistent for the application of nanoparticle functionalization to increase intestinal permeability. <P> Conclusion: The functionalized polymeric nanoparticles can be considered as carrier systems that improve the intestinal permeability and bioavailability of APIs, with the potential to result, in the future, in the development of oral medicines.

Modulation of Gastrointestinal Mucus Properties with Ionic Liquids for Drug Delivery

The mucus barrier lining the gastrointestinal tract poses a significant barrier to the oral delivery of macromolecular drugs. Successful approaches to overcoming this barrier have primarily focused on reducing drug and carrier interactions with mucus or disrupting the mucus layer directly. Choline-based ionic liquids (ILs) such as choline geranate and choline glycolate (CGLY) have recently been shown to be effective in enhancing the intestinal absorption of macromolecules such as insulin and immunoglobulin (IgG), respectively. Herein, the use of choline-based ILs as mucus-modulating agents for safely improving drug penetration through mucus is described. Choline-based ILs significantly increase the diffusion rates of cationic dextrans through mucin solution. Choline-maleic acid (CMLC 2:1) enhances the diffusion of 4 kDa cationic dextran in mucin solution by more than fourfold when compared to phosphate-buffered saline control. Choline-based ILs also reduce mucus viscosity without significantly impacting the native mucus gel structure. In vitro studies in a mucus-secreting coculture model with Caco-2 and HT29MTX-E12 cells further demonstrate the effectiveness of ILs in improving transport of cationic molecules in the presence of secreted mucus. This work demonstrates the potential for choline-based ionic liquids to be used as nondestructive mucus-modulating agents for enabling enhanced oral delivery of macromolecular drugs.

Antimicrobial Peptides: A New Hope in Biomedical and Pharmaceutical Fields

Antibiotics are essential drugs used to treat pathogenic bacteria, but their prolonged use contributes to the development and spread of drug-resistant microorganisms. Antibiotic resistance is a serious challenge and has led to the need for new alternative molecules less prone to bacterial resistance. Antimicrobial peptides (AMPs) have aroused great interest as potential next-generation antibiotics, since they are bioactive small proteins, naturally produced by all living organisms, and representing the first line of defense against fungi, viruses and bacteria. AMPs are commonly classified according to their sources, which are represented by microorganisms, plants and animals, as well as to their secondary structure, their biosynthesis and their mechanism of action. They find application in different fields such as agriculture, food industry and medicine, on which we focused our attention in this review. Particularly, we examined AMP potential applicability in wound healing, skin infections and metabolic syndrome, considering their ability to act as potential Angiotensin-Converting Enzyme I and pancreatic lipase inhibitory peptides as well as antioxidant peptides. Moreover, we argued about the pharmacokinetic and pharmacodynamic approaches to develop new antibiotics, the drug development strategies and the formulation approaches which need to be taken into account in developing clinically suitable AMP applications.

Specificity of pharmacokinetic modeling of nanomedicines

Nanomedicines have been developed for more than four decades to optimize the pharmacokinetics (PK) of drugs, especially absorption, distribution, and stability in vivo. Unfortunately, only a few drug products have reached the market. One reason among others is the lack of proper PK modeling and evaluation, which impedes the optimization of these promising drug delivery systems. In this review, we discuss the specificity of nanomedicines and propose key parameters to take into account for future accurate PK evaluation of nanomedicine. We believe that this could help these innovative drug products to reach to market and change the fate of many diseases.

Design of folic acid decorated virus-mimicking nanoparticles for enhanced oral insulin delivery

Mucus penetration and intestinal cells targeting are two main strategies to improve insulin oral delivery efficiency. However, few studies are available regarding the effectiveness of combining these two strategies into one nano-delivery system. For this objective, the folic acid (FA) decorated virus-mimicking nanoparticles were designed and influence of FA graft ratio on the in vitro and in vivo properties of insulin loaded nanoparticles was studied systemically. Firstly, using folic acid as active ligand, different folic acid grafted chitosan copolymers (FA-CS) were synthesized and characterized. Thereafter, using insulin-loaded poly(n-butylcyanoacrylate) nanoparticles as the core, virus-mimicking nanoparticles were fabricated by coating of positively charged FA-CS copolymer and negatively charged hyaluronic acid. Irrespective of the FA graft ratio, all the nanoparticles showed good stability, similar insulin release in the gastrointestinal fluid, excellent and similar penetration in mucus. The nanoparticles permeability in intestine was FA graft ratio and segment dependent, with FA graft ratio at/over 12.51% presenting better effect in the order of duodenum > jejunum ≈ ileum. Both mechanism studies and confocal microscopy observation demonstrated FA-mediated process was involved in the transport of FA decorated nanoparticles. In vivo studies revealed hypoglycemic effect of the nanoparticles was FA graft ratio dependent, a saturation phenomenon was observed when FA graft ratio was at/over 12.51%. In conclusion, folic acid decorated virus-mimicking nanoparticles presented improved insulin absorption, implying combining mucus penetration and active transcellular transport is an effective way to promote oral insulin absorption, while the modification ratio of active ligand needs optimization.

Oral peptide delivery: challenges and the way ahead

Peptides and proteins have emerged as potential therapeutic agents and, in the search for the best treatment regimen, the oral route has been extensively evaluated because of its non-invasive and safe nature. The physicochemical properties of peptides and proteins along with the hurdles in the gastrointestinal tract (GIT), such as degrading enzymes and permeation barriers, are challenges to their delivery. To address these challenges, several conventional and novel approaches, such as nanocarriers, site-specific and stimuli specific delivery, are being used. In this review, we discuss the challenges to the oral delivery of peptides and the approaches used to tackle these challenges.

Polymeric nanoencapsulation of zaleplon into PLGA nanoparticles for enhanced pharmacokinetics and pharmacological activity

Zaleplon (ZP) is a sedative and hypnotic drug used for the treatment of insomnia. Despite its potent anticonvulsant activity, ZP is not commonly used for the treatment of convulsion since ZP is characterized by its low oral bioavailability as a result of poor solubility and extensive liver metabolism. The following study aimed to formulate specifically controlled release nano-vehicles for oral and parenteral delivery of ZP to enhance its oral bioavailability and biological activity. A modified single emulsification-solvent evaporation method of sonication force was adopted to optimize the inclusion of ZP into biodegradable nanoparticles (NPs) using poly (dl-lactic-co-glycolic acid) (PLGA). The impacts of various formulation variables on the physicochemical characteristics of the ZP-PLGA-NPs and drug release profiles were investigated. Pharmacokinetics and pharmacological activity of ZP-PLGA-NPs were studied using experimental animals and were compared with generic ZP tablets. Assessment of gamma-aminobutyric acid (GABA) level in plasma after oral administration was conducted using enzyme-linked immunosorbent assay. The maximal electroshock-induced seizures model evaluated anticonvulsant activity after the parenteral administration of ZP-loaded NPs. The prepared ZP-PLGA NPs were negatively charged spherical particles with an average size of 120-300 nm. Optimized ZP-PLGA NPs showed higher plasma GABA levels, longer sedative, hypnotic effects, and a 3.42-fold augmentation in oral drug bioavailability in comparison to ZP-marketed products. Moreover, parenteral administration of ZP-NPs showed higher anticonvulsant activity compared to free drug. Oral administration of ZP-PLGA NPs achieved a significant improvement in the drug bioavailability, and parenteral administration showed a pronounced anticonvulsant activity.

Dye-Loaded Nanoemulsions: Biomimetic Fluorescent Nanocarriers for Bioimaging and Nanomedicine

Lipid nanoemulsions (NEs), owing to their controllable size (20 to 500 nm), stability and biocompatibility, are now frequently used in various fields, such as food, cosmetics, pharmaceuticals, drug delivery, and even as nanoreactors for chemical synthesis. Moreover, being composed of components generally recognized as safe (GRAS), they can be considered as "green" nanoparticles that mimic closely lipoproteins and intracellular lipid droplets. Therefore, they attracted attention as carriers of drugs and fluorescent dyes for both bioimaging and studying the fate of nanoemulsions in cells and small animals. In this review, the composition of dye-loaded NEs, methods for their preparation, and emerging biological applications are described. The design of bright fluorescent NEs with high dye loading and minimal aggregation-caused quenching (ACQ) is focused on. Common issues including dye leakage and NEs stability are discussed, highlighting advanced techniques for their characterization, such as Förster resonance energy transfer (FRET) and fluorescence correlation spectroscopy (FCS). Attempts to functionalize NEs surface are also discussed. Thereafter, biological applications for bioimaging and single-particle tracking in cells and small animals as well as biomedical applications for photodynamic therapy are described. Finally, challenges and future perspectives of fluorescent NEs are discussed.

Protein corona: Dr. Jekyll and Mr. Hyde of nanomedicine

Nanomedicine is an interdisciplinary field of research, comprising science, engineering, and medicine. Many are the clinical applications of nanomedicine, such as molecular imaging, medical diagnostics, targeted therapy, and image-guided surgery. Despite major advances during the past 20 years, many efforts must be done to understand the complex behavior of nanoparticles (NPs) under physiological conditions, the kinetic and thermodynamic principles, involved in the rational design of NP. Once administrated in physiological environment, NPs interact with biomolecules and they are surrounded by protein corona (PC) or biocorona. PC can trigger an immune response, affecting NPs toxicity and targeting capacity. This review aims to provide a detailed description of biocorona and of parameters that are able to control PC formation and composition. Indeed, the review provides an overview about the role of PC in the modulation of both cytotoxicity and immune response as well as in the control of targeting capacity.

Absorption, distribution, metabolism, and excretion of nanocarriers in vivo and their influences

As one of the most promising and effective delivery systems for targeted controlled-release drugs, nanocarriers (NCs) have been widely studied. Although the development of nanoparticle preparations is very prosperous, the safety and effectiveness of NCs are not guaranteed and cannot be precisely controlled due to the unclear processes of absorption, distribution, metabolism, and excretion (ADME), as well as the drug release mechanism of NCs in the body. Thus, the approval of NCs for clinical use is extremely rare. This paper reviews the research progress and challenges of using NCs in vivo based on a review of several hundred closely related publications. First, the ADME of NCs under different administration routes is summarized; second, the influences of the physical, chemical, and biosensitive properties, as well as targeted modifications of NCs on their disposal process, are systematically analyzed; third, the tracer technology related to the in vivo study of NCs is elaborated; and finally, the challenges and perspectives of nanoparticle research in vivo are introduced. This review may help readers to understand the current research progress and challenges of nanoparticles in vivo, as well as of tracing technology in nanoparticle research, to help researchers to design safer and more efficient NCs. Furthermore, this review may aid researchers in choosing or exploring more suitable tracing technologies to further advance the development of nanotechnology.

An Underestimated Factor: The Extent of Cross-Reactions Modifying APIs in Surface-Modified Liposomal Preparations Caused by Comprised Activated Lipids

Despite the nowadays available plentitude of strategies to selectively introduce functional surface modification of liposomes, in preclinical research this process is still primarily performed after liposomal preparation utilizing comprised activated phospholipids with functionalized head groups. However, because these activated lipids are present during the liposomal preparation process, they can cross-react with incorporated drugs, especially the particularly often utilized active esters and maleimide groups. Macromolecular drugs, being composed of amino acids, are particularly prone to such cross-reactions due to their often multiple reactive functionalities such as amino and disulfide groups. To demonstrate this impact on the formulation in liposomal surface modification, we assessed the extent of cross-reaction during the liposomal preparation of two activated phospholipids with typically used head group functionalized phospholipids, with the two peptide drugs vancomycin and insulin comprising disulfide and amino functionalities. Both drugs revealed a considerable fraction of covalent modification (estimated 2 to 12%) generated during the liposome preparation process with comprised activated lipids. Modification of the active pharmaceutical ingredients (APIs) was determined by high-resolution mass spectrometric analysis. These findings clearly demonstrate the non-negligibility of potential cross reactions using the post preparation liposomal surface modification strategy in preclinical research.

Overcoming Multiple Absorption Barrier for Insulin Oral Delivery Using Multifunctional Nanoparticles Based on Chitosan Derivatives and Hyaluronic Acid

Background

Although dynamics and uses of modified nanoparticles (NPs) as orally administered macromolecular drugs have been researched for many years, measures of molecule stability and aspects related to important transport-related mechanisms which have been assessed in vivo remain as relatively under characterized. Thus, our aim was to develop a novel type of oral-based delivery system for insulin and to overcome barriers to studying the stability, transport mechanisms, and efficacy in vivo of the delivery system.

Methods

NPs we developed and tested were composed of insulin (INS), dicyandiamide-modified chitosan (DCDA-CS), cell-penetrating octaarginine (r8), and hydrophilic hyaluronic acid (HA) and were physically constructed by electrostatic self-assembly techniques.

Results

Compared to free-insulin, levels of HA-DCDA-CS-r8-INS NPs were retained at more desirable measures of biological activity in our study. Further, our assessments of the mechanisms for NPs suggested that there were high measures of cellular uptake that mainly achieved through active transport via lipid rafts and the macropinocytosis pathway. Furthermore, investigations of NPs indicated their involvement in caveolae-mediated transport and in the DCDA-CS-mediated paracellular pathway, which contributed to increasing the efficiency of sequential transportation from the apical to basolateral areas. Accordingly, high efficiency of absorption of NPs in situ for intestinal loop models was realized. Consequently, there was a strong induction of a hypoglycemic effect in diabetic rats of NPs via orally based administrations when compared with measures related to free insulin.

Conclusion

Overall, the dynamics underlying and influenced by HA-DCDA-CS-r8-INS may hold great promise for stability of insulin and could help overcome interference by the epithelial barrier, and thus showing a great potential to improve the efficacy of orally related treatments.

Development of Lipid-Polymer Hybrid Nanoparticles for Improving Oral Absorption of Enoxaparin

Enoxaparin, an anticoagulant that helps prevent the formation of blood clots, is administered parenterally. Here, we report the development and evaluation of lipid-polymer hybrid nanoparticles (LPHNs) for the oral delivery of enoxaparin. The polymer poloxamer 407 (P407) was incorporated into lipid nanoparticles to form gel cores and ensure high encapsulation efficiency and the controlled release of enoxaparin. In vitro results indicated that 30% of P407 incorporation offered higher encapsulation efficiency and sustained the release of enoxaparin. Laser confocal scanning microscopy (LCSM) images showed that LPHNs could not only significantly improve the accumulation of enoxaparin in intestinal villi but also facilitate enoxaparin transport into the underlayer of intestinal epithelial cells. In vivo pharmacokinetic study results indicated that the oral bioavailability of enoxaparin was markedly increased about 6.8-fold by LPHNs. In addition, its therapeutic efficacy against pulmonary thromboembolism was improved 2.99-fold by LPHNs. Moreover, LPHNs exhibited excellent biocompatibility in the intestine. Overall, the LPHN is a promising delivery carrier to boost the oral absorption of enoxaparin.

Silanol: a bifunctional group for peptide synthesis and late-stage functionalization

Chemical modification of a specific amino acid residue on peptides represents an efficient strategy to improve their pharmacokinetics and facilitates the potential to achieve post-synthetic diversification of peptides. Herein, we reported the first Pd-catalyzed late-stage ortho-olefination of Tyr residues on peptides with high chemo- and site-selectivity, by employing the easily attached and removable silanol as a bifunctional protecting group and directing group. Up to hexapeptides with variation on amino acid sequences or locations of the Tyr residue and different olefins were compatible with this protocol, which enriched the chemical toolbox for late-stage modification via C(sp2)-H functionalization. Furthermore, the orthogonal protection strategies of Tyr were also developed and could be applied to SPPS.

Nanoparticles with surface features of dendritic oligopeptides as potential oral drug delivery systems

Endowing the NPs with specific surface features of dendritic oligopeptides holds great potential for the oral delivery of peptide/protein drugs.

Engineering drug delivery systems to overcome mucosal barriers for immunotherapy and vaccination

Mucosal surfaces protect our bodies from pathogens and external irritants using a system of biological barriers. Overcoming these barriers is a significant drug delivery challenge, particularly for immunotherapies that aim to modulate the local immune response. Reaching local lymphoid tissues and draining lymph nodes (LNs) requires crossing the mucus mesh, mucosal epithelium, and either targeting M cells covering lymphoid tissues or utilizing lymphatic transport that shuttles molecules and particulates from the periphery to the LN. We first highlight the barrier properties of mucus and mucosal epithelium, and the function of the mucosal immune system. We then dive into existing drug delivery technologies that have been engineered to overcome each of these barriers. We particularly focus on novel strategies for targeting lymphoid tissues, which has been shown to enhance immunotherapies and vaccinations, via directly targeting LNs, lymphatic vessels, and M cells that transport samples of mucosal content to the lymphoid tissues.

Coating of PLA-nanoparticles with cyclic, arginine-rich cell penetrating peptides enables oral delivery of liraglutide

Until today, the oral delivery of peptide drugs is hampered due to their instability in the gastrointestinal tract and low mucosal penetration. To overcome these hurdles, PLA (polylactide acid)-nanoparticles were coated with a cyclic, polyarginine-rich, cell penetrating peptide (cyclic R9-CPP). These surface-modified nanoparticles showed a size and polydispersity index comparable to standard PLA-nanoparticles. The zeta potential showed a significant increase indicating successful CPP-coupling to the surface of the nanoparticles. Cryo-EM micrographs confirmed the appropriate size and morphology of the modified nanoparticles. A high encapsulation efficiency of liraglutide could be achieved. In vitro tests using Caco-2 cells showed high viability indicating the tolerability of this novel formulation. A strongly enhanced mucosal binding and penetration was demonstrated by a Caco-2 binding and uptake assay. In Wistar rats, the novel nanoparticles showed a substantial, 4.5-fold increase in the oral bioavailability of liraglutide revealing great potential for the oral delivery of peptide drugs.

Oral delivery system for low molecular weight protamine-dextran-poly(lactic-co-glycolic acid) carrying exenatide to overcome the mucus barrier and improve intestinal targeting efficiency

Aim: This study aimed to explore the effect of nanoparticles loaded with exenatide in overcoming the mucus barrier and improving intestinal targeting efficiency, to improve the oral bioavailability. Materials & methods: Low molecular weight protamine (LMWP)-dextran-poly(lactic-co-glycolic acid) was used to create LMWP-dextran-poly(lactic-co-glycolic acid)-nanoparticles (LDPs) encapsulating exenatide-Zn²⁺ complex.Results & conclusion: LDPs showed improved penetration of the mucus barrier, and LMWP was helpful for mediating cell translocation through protein transduction domains. The absorption sites and distribution rates of LDPs were verified by intestinal localization experiments and in vivo distribution experiments. Cell uptake and transmembrane experiments confirmed the absorption efficiency in the intestinal epithelium. Furthermore, the relative bioavailability after oral administration of exenatide-Zn²⁺-LDPs was 8.4%, with a significant hypoglycemic effect on Type 2 diabetic mice.

Investigation Of Vitamin B12-Modified Amphiphilic Sodium Alginate Derivatives For Enhancing The Oral Delivery Efficacy Of Peptide Drugs

Purpose

Peptide drugs have been used in therapy various diseases. However, the poor bioavailability of peptide drugs for oral administration has limited their clinical applications, on account of the acidic environment and digestive enzymes inside the human gastrointestinal tract. To enhance stability in the human gastrointestinal tract, bioavailability, and targeted drug delivery of peptide drugs through oral administration, a vitamin B₁₂-modified amphiphilic sodium alginate derivative (CSAD-VB₁₂) was synthesized.

Materials and methods

A vitamin B₁₂-modified amphiphilic sodium alginate derivative (CSAD-VB₁₂) was synthesized via the N,N'-dicyclohexylcarbodiimide active method at room temperature, and then characterized using FTIR and ¹H NMR spectroscopy. Insulin was used as a model peptide drug and the insulin-loaded CSAD-VB₁₂ (CSAD-VB₁₂/insulin) nanoparticles with negative zeta potentials were prepared in PBS (pH=7.4). Scanning electron microscopy was used to observe CSAD-VB₁₂/insulin as spherical nanoparticles. The CSAD-VB₁₂ derivatives and CSAD-VB₁₂/insulin nanoparticles displayed nontoxicity towards the human colon adenocarcinoma (Caco-2) cells by CCK-8 test. Caco-2 cell model was used to measure the apparent permeability (Papp) of insulin, CSAD/insulin and CSAD-VB₁₂/insulin. Furthermore, confocal was used to confirm the endocytosis of intestinal enterocytes. Type 1 diabetes mice were used to evaluate the intestinal absorption and retention effect of test nanoparticles.

Results

They were observed as spherical nanoparticles in the size of 30-50 nm. The CSAD-VB₁₂ derivatives and CSAD-VB₁₂/insulin nanoparticles displayed nontoxicity towards the human colon adenocarcinoma (Caco-2) cells. Comparing with insulin and the CSAD/insulin nanoparticles, the CSAD-VB₁₂/insulin nanoparticles exhibited higher permeation ability through intestinal enterocytes in the Caco-2 cell model. Oral administration of the CSAD-VB₁₂/insulin nanoparticles to Type 1 diabetic mice yields higher intestinal retention effect, targeted absorption, and outstanding efficacy.

Conclusion

CSAD-VB₁₂ derivatives enhance the small intestinal absorption efficacy and retention of peptide by oral administration, which indicated that it could be a promising candidate for oral peptide delivery in the prospective clinical application.

Multifunctional oral delivery systems for enhanced bioavailability of therapeutic peptides/proteins

In last few years, therapeutic peptides/proteins are rapidly growing in drug market considering their higher efficiency and lower toxicity than chemical drugs. However, the administration of therapeutic peptides/proteins is mainly limited in parenteral approach. Oral therapy which was hampered by harsh gastrointestinal environment and poorly penetrating epithelial barriers often results in low bioavailability (less than 1%-2%). Therefore, delivery systems that are rationally designed to overcome these challenges in gastrointestinal tract and ameliorate the oral bioavailability of therapeutic peptides/proteins are seriously promising. In this review, we summarized various multifunctional delivery systems, including lipid-based particles, polysaccharide-based particles, inorganic particles, and synthetic multifunctional particles that achieved effective oral delivery of therapeutic peptides/proteins.

Transferrin Functionization Elevates Transcytosis of Nanogranules across Epithelium by Triggering Polarity-Associated Transport Flow and Positive Cellular Feedback Loop

Overcoming the epithelial barriers to enhance drug transport is a focused topic for gastrointestinal, intratracheal, intranasal, vaginal, and intrauterine delivery. Nanomedicines with targeting functionization promote such a process owing to specific ligand-receptor interaction. However, compared to the cell uptake of targeting nanotherapies, currently few studies concentrate on their transcytosis including endocytosis for "in" and exocytosis for "out". In fact, the cellular regulatory mechanism for these pathways as well as the principle of ligand's effect on the transcytosis are almost ignored. Here, we fabricated transferrin (Tf) functionalized nanogranules (Tf-NG) as the nanomedicine model and confirmed the difference in polar distributions of Tf receptors (TfRs) between two epithelium models (bipolarity for Caco-2 and unipolarity for MDCK cells). Compared to the nonspecific reference, Tf-conjugation boosted the endocytosis by different pathways in two cell models and transformed the intracellular route of Tf-NG in both cells differently, affecting exocytosis, recycling, and degradation but not the secretion pathway. Only bipolar cells could establish a complete transport flow from "in" to "out", leading to the enhanced transcytosis of Tf-NG. Importantly, epithelia could make responses to Tf-NG transcytosis. Based on the quantitative proteomics, the intracellular trafficking of Tf-NG altered the protein expression profiles, in which the endocytosis- and transcytosis-related proteins were specifically upregulated. Particularly, only bipolar cells could positively feed back to such trafficking via accelerating the subsequent Tf-NG transcytosis. Here, all the cell transport of Tf-NG was polarity associated. In summary, Tf modification elevated the transcytosis of Tf-NG across the epithelium by triggering the polarity-associated transport flow and positive cell feedback loop. These findings provided an insight into the targeting nanodelivery for efficient transport through epithelial barriers.

GM1-Binding Conjugates To Improve Intestinal Permeability

Drugs and proteins with poor intestinal permeability have a limited oral bioavailability. To remediate this problem, a receptor-mediated endocytosis and transcytosis approach was explored. Indeed, the nontoxic β subunit of cholera toxin (CTB) can cross the intestinal barrier by binding to receptor GM1. In this study, we explored the use of GM1-binding peptides and CTB as potential covalent carriers of poorly permeable molecules. GM1-binding peptides (G23, P3) and CTB were conjugated to poorly permeable fluorescent probes such as fluorescein isothiocyanate (FITC) and albumin-FITC using triethylene glycol spacers and click chemistry. The affinity of the peptide conjugates with receptor GM1 was confirmed by isothermal titration calorimetry or microscale thermophoresis, and the results suggested the involvement of nonspecific interactions. Conjugating the model drugs to G23 and P3 improved the internalization into Caco-2 and T84 cells, although the process was not dependent on the amount of GM1 receptor. However, conjugation of bovine serum albumin FITC to CTB increased the internalization in the same cells in a GM1-dependent pathway. Peptide conjugates demonstrated a limited permeability through a Caco-2 monolayer, whereas G23 and CTB conjugates slightly enhanced permeability through a T84 cell monolayer compared to model drugs alone. Since CTB can improve the permeability of large macromolecules such as albumin, it is an interesting carrier for the improvement of oral bioavailability of various other macromolecules such as heparins, proteins, and siRNAs.

Bioimaging of Intact Polycaprolactone Nanoparticles Using Aggregation-Caused Quenching Probes: Size-Dependent Translocation via Oral Delivery

The limited information on biological fate impedes the development of more efficient polymeric nanoparticles for oral delivery of bio-macromolecules. In this study, the in vivo fate as well as the trans-epithelia transport of polycaprolactone (PCL) nanoparticles is explored by labeling with aggregation-caused quenching probes, which is capable of identifying intact nanoparticles. Live imaging and confocal laser scan microscopy confirm size-dependent absorption of PCL nanoparticles. In general, reducing particle size favors a faster and more oral absorption. Nanoparticles larger than 200 nm, such as 600 and 2000 nm, cannot be efficiently transported across the intestinal membrane. The absorbed nanoparticles (50 and 200 nm) mainly accumulate in the liver. Lymph may be the main absorption route for PCL nanoparticles, transporting 2.39 ± 1.81% and 0.98 ± 0.58% of administered 50 and 200 nm nanoparticles, respectively. Cellular uptake and transportation of PCL nanoparticles are also size dependent. Both enterocytes and M cells mediated transcytosis are involved in the transport of 50 nm PCL nanoparticles, while the M cell pathway is dominative for other nanoparticles. In conclusion, the study provides a valuable tool for bioimaging of intact polymeric nanoparticles as well as solid evidence supporting size-dependent translocation of the nanoparticles via oral delivery.

Preparation and Characterization of Insulin-Loaded Zein/Carboxymethylated Short-Chain Amylose Complex Nanoparticles

In this work, we use antisolvent precipitation to prepare zein/carboxymethylated short-chain amylose (CSA) complex nanoparticles for insulin encapsulation, showing that insulin-loaded zein/CSA complex nanoparticles are homogeneous, generally exhibiting sizes of <200 nm with a narrow distribution (polydispersity index < 0.100), spherical shape, and strong negative charge (-40 mV). Fourier transform infrared spectroscopy analysis reveals that the formation of the above nanoparticles is mainly driven by hydrophobic, hydrogen-bonding, and electrostatic interactions between CSA, insulin, and zein. In comparison to zein nanoparticles, zein/CSA complex nanoparticles feature much higher insulin encapsulation efficiency (45.8 versus 90.5%, respectively) and are essentially nontoxic to Caco-2 cells. Thus, this work provides new insights into the design of drug delivery systems and is expected to inspire their further development.

Lysozyme and DNase I loaded poly (D, L lactide-co-caprolactone) nanocapsules as an oral delivery system

Clinical applications of oral protein therapy for the treatment of various chronic diseases are limited due to the harsh conditions encounter the proteins during their journey in the Gastrointestinal Tract. Although nanotechnology forms a platform for the development of oral protein formulations, obtaining physiochemically stable formulations able to deliver active proteins is still challenging because of harsh preparation conditions. This study proposes the use of poly (D, L-lactic-co-caprolactone)-based polymeric nanocapsules at different monomers' ratios for protein loading and oral delivery. All formulations had a spherical shape and nano-scale size, and lysozyme encapsulation efficiency reached 80% and significantly affected by monomers' ratio. Trehalose and physical state of lysozyme had a significant effect on its biological activity (P < 0.05). Less than 10% of the protein was released in simulated gastric fluid, and 73% was the highest recorded accumulative release percentage in simulated intestinal fluid (SIF) over 24 h. The higher caprolactone content, the higher encapsulation efficiency (EE) and the lower SIF release recorded. Therefore, the formulation factors were optimised and the obtained system was PEGylated wisely to attain EE 80%, 81% SIF release within 24 h, and 98% lysozyme biological activity. The optimum formulation was prepared to deliver DNase, and similar attributes were obtained.