Recent developments in lactose blend formulations for carrier-based dry powder inhalation

Dry powder inhaler design and particle technology in enhancing Pulmonary drug deposition: challenges and future strategies

OBJECTIVES

The efficient delivery of drugs from dry powder inhaler (DPI) formulations is associated with the complex interaction between the device design, drug formulations, and patient's inspiratory forces. Several challenges such as limited emitted dose of drugs from the formulation, low and variable deposition of drugs into the deep lungs, are to be resolved for obtaining the efficiency in drug delivery from DPI formulations. The objective of this study is to review the current challenges of inhaled drug delivery technology and find a way to enhance the efficiency of drug delivery from DPIs.

METHODS/EVIDENCE ACQUISITION

Using appropriate keywords and phrases as search terms, evidence was collected from the published articles following SciFinder, Web of Science, PubMed and Google Scholar databases.

RESULTS

Successful lung drug delivery from DPIs is very challenging due to the complex anatomy of the lungs and requires an integrated strategy for particle technology, formulation design, device design, and patient inhalation force. New DPIs are still being developed with limited performance and future device design employs computer simulation and engineering technology to overcome the ongoing challenges. Many issues of drug formulation challenges and particle technology are concerning factors associated with drug dispersion from the DPIs into deep lungs.

CONCLUSION

This review article addressed the appropriate design of DPI devices and drug formulations aligned with the patient's inhalation maneuver for efficient delivery of drugs from DPI formulations.

Particulate bioaerogels for respiratory drug delivery

The bioaerogel microparticles have been recently developed for respiratory drug delivery and attract fast increasing interests. These highly porous microparticles have ultralow density and hence possess much reduced aerodynamic diameter, which favour them with greatly enhanced dispersibility and improved aerosolisation behaviour. The adjustable particle geometric dimensions by varying preparation methods and controlling operation parameters make it possible to fabricate bioaerogel microparticles with accurate sizes for efficient delivery to the targeted regions of respiratory tract (i.e. intranasal and pulmonary). Additionally, the technical process can provide bioaerogel microparticles with the opportunities of accommodating polar, weak polar and non-polar drugs at sufficient amount to satisfy clinical needs, and the adsorbed drugs are primarily in the amorphous form that potentially can facilitate drug dissolution and improve bioavailability. Finally, the nature of biopolymers can further offer additional advantageous characteristics of improved mucoadhesion, sustained drug release and subsequently elongated time for continuous treatment on-site. These fascinating features strongly support bioaerogel microparticles to become a novel platform for effective delivery of a wide range of drugs to the targeted respiratory regions, with increased drug residence time on-site, sustained drug release, constant treatment for local and systemic diseases and anticipated better-quality of therapeutic effects.

Fine excipient materials in carrier-based dry powder inhalation formulations: The interplay of particle size and concentration effects

The contributions of fine excipient materials to drug dispersibility from carrier-based dry powder inhalation (DPI) formulations are well recognized, although they are not completely understood. To improve the understanding of these contributions, we investigated the influences of the particle size of the fine excipient materials on characteristics of carrier-based DPI formulations. We studied two particle size grades of silica microspheres, with volume median diameters of 3.31 μm and 8.14 μm, as fine excipient materials. Inhalation formulations, each composed of a lactose carrier material, one of the fine excipient materials (2.5% or 15.0% w/w), and a drug (fluticasone propionate) material (1.5% w/w) were prepared. The physical microstructure, the rheological properties, the aerosolization pattern, and the aerodynamic performance of the formulations were studied. At low concentration, the large silica microspheres had a more beneficial influence on the drug dispersibility than the small silica microspheres. At high concentration, only the small silica microspheres had a beneficial influence on the drug dispersibility. The results reveal influences of fine excipient materials on mixing mechanics. At low concentration, the fine particles improved deaggregation and distribution of the drug particles over the surfaces of the carrier particles. The large silica microspheres were associated with a greater mixing energy and a greater improvement in the drug dispersibility than the small silica microspheres. At high concentration, the large silica microspheres kneaded the drug particles onto the surfaces of the carrier particles and thus impaired the drug dispersibility. As a critical attribute of fine excipient materials in carrier-based dry powder inhalation formulations, the particle size demands robust specification setting.

Premix technologies for drug delivery: manufacturing, applications, and opportunities in regulatory filing

Active pharmaceutical ingredients (APIs) and excipients can be carefully combined in premix-based materials before being added to dosage forms, providing a flexible platform for the improvement of drug bioavailability, stability, and patient compliance. This is a promising and transformative approach in novel and generic product development, offering both the potential to overcome challenges in the delivery of complex APIs and viable solutions for bypassing patent hurdles in generic product filing. We discuss the different types of premixes; manufacturing technologies such as spray drying, hot melt extrusion, wet granulation, co-crystal, co-milling, co-precipitation; regulatory filing opportunities; and major bottlenecks in the use of premix materials in different aspects of pharmaceutical product development.

Pulmonary drug delivery devices and nanosystems as potential treatment strategies for acute respiratory distress syndrome (ARDS)

Despite advances in drug delivery technologies, treating acute respiratory distress syndrome (ARDS) is challenging due to pathophysiological barriers such as lung injury, oedema fluid build-up, and lung inflammation. Active pharmaceutical ingredients (API) can be delivered directly to the lung site of action with the use of aerosol-based drug delivery devices, and this circumvents the hepatic first-pass effect and improves the bioavailability of drugs. This review discusses the various challenges and barriers for pulmonary drug delivery, current interventions for delivery, considerations for effective drug delivery, and the use of nanoparticle drug delivery carriers as potential strategies for delivering therapeutics in ARDS. Nanosystems have the added benefit of entrapping drugs, increase pulmonary drug bioavailability, and using biocompatible and biodegradable excipients that can facilitate targeted and/or controlled delivery. These systems provide an alternative to existing conventional systems. An effective way to deliver drugs for the treatment of ARDS can be by using colloidal systems that are aerosolized or inhaled. Drug distribution to the deeper pulmonary tissues is necessary due to the significant endothelial cell destruction that is prevalent in ARDS. The particle size of nanoparticles (<0.5 μm) makes them ideal candidates for treating ARDS as they can reach the alveoli. A look into the various potential benefits and limitations of nanosystems used for other lung disorders is also considered to indicate how they may be useful for the potential treatment of ARDS.

Critical attributes of fine excipient materials in carrier-based dry powder inhalation formulations: The particle shape and surface properties

The potential of fine excipient materials to improve the aerodynamic performance of carrier-based dry powder inhalation (DPI) formulations is well acknowledged but not fully elucidated. To improve the understanding of this potential, we studied two fine excipient materials: micronized lactose particles and silica microspheres. Inhalation formulations, each composed of a coarse lactose carrier, one of the two fine excipient materials (0.0-15.0 % w/w), and a spray-dried drug (fluticasone propionate) material (1.5 % w/w) were prepared. The physical structure, the flow behavior, the aerosolization behavior, and the aerodynamic performance of the formulations were studied. The two fine excipient materials similarly occupied carrier surface macropores. However, only the micronized lactose particles formed agglomerates and appeared to increase the tensile strength of the formulations. At 2.5 % w/w, the two fine excipient materials similarly improved drug dispersibility, whereas at higher concentrations, the micronized lactose material was more beneficial than the silica microspheres. The findings suggest that fine excipient materials improve drug dispersibility from carrier-based DPI formulations at low concentrations by filling carrier surface macropores and at high concentrations by forming agglomerates and/or enforcing fluidization. The study emphasizes critical attributes of fine excipient materials in carrier-based DPI formulations.

Pharmacokinetics and relative bioavailability study of two cefquinome sulfate intramammary infusions in cow milk

In this study, two intramammary infusions of cefquinome sulfate were investigated for pharmacokinetics and bioavailability. Twelve lactating cows for each group were administered an effective dose of 75 mg/gland for cefquinome, with milk samples collected at various time intervals. The concentrations of cefquinome in milk at different times were determined by the UPLC-MS/MS method. Analyses of noncompartmental pharmacokinetics were conducted on the concentration of cefquinome in milk. Mean pharmacokinetic parameters of group A and group B following intramammary administration were as follows: AUClast 300558.57 ± 25052.78 ng/mL and 266551.3 ± 50654.85 ng/mL, Cmax 51786.35 ± 11948.4 ng/mL and 59763.7 ± 8403.2 ng/mL, T1/2 5.69 ± 0.62 h and 5.25 ± 1.62 h, MRT 7.43 ± 0.79 h and 4.8 ± 0.78 h, respectively. Pharmacokinetic experiments showed that the relative bioavailability of group B was 88.69% that of group A. From our findings, group B (3 g: 75 mg) shows a quicker drug elimination process than group A (8 g: 75 mg), which suggests that the withdrawal period for the new formulation may be shorter.

Mixing energy as an adjustment tool for aerodynamic behaviour of an inhaled product: In-vitro and in-vivo effects

This paper describes the development of a fixed dose dry powder combination of indacaterol maleate (Inda) and glycopyrronium bromide (Glyco) in Easyhaler® inhaler for a comparative pharmacokinetic (PK) study, as well as the outcome of such a study. The development aim was to produce formulations with three different in vitro dispersibility profiles for both Inda and Glyco. This so-called 'rake' approach allows for quantitation of the candidate formulations relative to the reference product Ultibro® Breezhaler® in terms of the key PK parameters. Three formulations (A, B and C) were produced based on the mixing energy concept. For both APIs, formulation A (lowest mixing energy) displayed the highest fine particle fractions and formulation C (highest mixing energy) the lowest. GMP manufacturing confirmed the performance of the three formulations. The candidate formulations were tested against the reference product in a single dose PK study in healthy volunteers. Clear differences in Inda plasma concentration profiles were observed between the treatments when administered concomitantly with charcoal, with Easyhaler A showing the highest Cmax value and Easyhaler C the lowest. Easyhaler B was bioequivalent to Ultibro Breezhaler with regard to the primary PK parameters of Inda, Cmax and AUC72h. For Glyco, Easyhaler formulations A, B and C provided lower peak concentrations than Ultibro Breezhaler. For AUC72h of Glyco, Easyhaler B was bioequivalent to the reference product. Additional measures for adjustment of formulation performance can be foreseen, whose effects can be predicted based on mixing energy theory.

Conversion of liquid chitosan-based nanoemulsions into inhalable solid microparticles: Process challenges with polysaccharide

Solid particles ≤5 μm are essential to allow lower lung deposition and macrophage phagocytosis of anti-tubercular drugs. Decorating liquid nanoemulsion of anti-tubercular drug with macrophage-specific chitosan and chitosan-folate conjugate and spray drying the nanoemulsion with lactose produced oversized solid particles due to polysaccharide binding effects. This study designed solid nanoemulsion using lactose as the primary solid carrier and explored additives and spray-drying variables to reduce the binding and particle growth effects of chitosan. Deposition of magnesium stearate on lactose negated chitosan-inducible excessive lactose-liquid nanoemulsion binding and solid particle growth. Moderating the adhesion of chitosan-decorated liquid nanoemulsion onto lactose produced smooth-surface solid microparticles (size: 5.45 ± 0.26 μm; roughness: ∼80 nm) with heterogeneous size (span: 1.87 ± 1.21) through plasticization of constituent materials of nanoemulsion and lactose involving OH/N-H, C-H, CONH and/or COO moieties. Smaller solid particles could attach onto the larger particles with minimal steric hindrance by smooth surfaces. Together with round solid particulate structures (circularity: 0.919 ± 0.002), good pulmonary inhalation beneficial for treatment of pulmonary tuberculosis as well as other diseases is conferred.

Polymyxin B sulfate inhalable microparticles with high-lectin-affinity sugar carriers for efficient treatment of biofilm-associated pulmonary infections

Pulmonary infections caused by multidrug-resistant bacteria have become a significant threat to human health. Bacterial biofilms exacerbate the persistence and recurrence of pulmonary infections, hindering the accessibility and effectiveness of antibiotics. In this study, a dry powder inhalation (DPI) consisting of polymyxin B sulfate (PMBS) inhalable microparticles and high-lectin-affinity (HLA) sugar (i.e., raffinose) carriers was developed for treating pulmonary infections and targeting bacterial lectins essential for biofilm growth. The formulated PMBS-HLA DPIs exhibited particle sizes of approximately 3 μm, and surface roughness varied according to the drug-to-carrier ratio. Formulation F5 (PMBS: raffinose = 10:90) demonstrated the highest fine particle fraction (FPF) value (64.86%), signifying its substantially enhanced aerosol performance, potentially attributable to moderate roughness and smallest mass median aerodynamic particle size. The efficacy of PMBS-HLA DPIs in inhibiting biofilm formation and eradicating mature biofilms was significantly improved with the addition of raffinose, suggesting the effectiveness of lectin-binding strategy for combating bacterial biofilm-associated infections. In rat models with acute and chronic pulmonary infections, F5 demonstrated superior bacterial killing and amelioration of inflammatory responses compared to spray-dried PMBS (F0). In conclusion, our HLA carrier-based formulation presents considerable potential for the efficient treatment of multidrug-resistant bacterial biofilm-associated pulmonary infections.

Complexities related to the amorphous content of lactose carriers

Although the amount of amorphous content in lactose is low, its impact on the performance of a dry powder inhalation formulation might be high. Many formulators and regulatory agencies believe that the levels of amorphous content should be controlled once there is a relationship with the final product performance. This is however not an easy task. The current paper elaborates on multiple challenges and complexities that are related to the control of the amorphous content in lactose. The definition and quantification methods of amorphous lactose are reviewed, as well as challenges related to thermodynamic instability. Additionally, current monographs and recent position papers considering this parameter are discussed to provide an overview of the regulatory landscape. Development of a control strategy is recommended, provided that the amorphous content at a specific moment in the process has shown to have an impact on the performance of the dry powder inhaler.

Impact of high shear blending on distribution of magnesium stearate on lactose for dry powder inhaled formulations

The use of magnesium stearate along with lactose in Dry Powder Inhaler (DPI) formulations is increasing. The impact of different conditions of high shear blending on the distribution of magnesium stearate on lactose particles was investigated in this study. The formulated blends were manufactured using high shear blending of pre-blended coarse and fine lactose particles with 1.0% (w/w) magnesium stearate under different blending conditions, specifically blending speed and time. The effects of blending conditions on the distribution of magnesium stearate on lactose particles were clearly identifiable by characterizing the formulated blends by means of rheological evaluations, scanning electron microscopy, and chemical surface analysis using time-of-flight secondary ion mass spectrometry (ToF-SIMS). Rheological properties were significantly affected in blends with magnesium stearate compared to blends without magnesium stearate. Blending speed exhibited a strong influence on the distribution of magnesium stearate on lactose surface, while blending time had relatively minor effect.

Microstructural insight into inhalation powder blends through correlative multi-scale X-ray computed tomography

Dry powder inhalers (DPI) are important for topical drug delivery to the lungs, but characterising the pre-aerosolised powder microstructure is a key initial step in understanding the post-aerosolised blend performance. In this work, we characterise the pre-aerosolised 3D microstructure of an inhalation blend using correlative multi-scale X-ray Computed Tomography (XCT), identifying lactose and drug-rich phases at multiple length scales on the same sample. The drug-rich phase distribution across the sample is shown to be homogeneous on a bulk scale but heterogeneous on a particulate scale, with individual clusters containing different amounts of drug-rich phase, and different parts of a carrier particle coated with different amounts of drug-rich phase. Simple scalings of the drug-rich phase thickness with carrier particle size are used to derive the drug-proportion to carrier particle size relationship. This work opens new doors to micro-structural assessment of inhalation powders that could be invaluable for bioequivalence assessment of dry powder inhalers.

Drug combinations for inhalation: Current products and future development addressing disease control and patient compliance

Pulmonary delivery is an alternative route of administration with numerous advantages over conventional routes of administration. It provides low enzymatic exposure, fewer systemic side effects, no first-pass metabolism, and concentrated drug amounts at the site of the disease, making it an ideal route for the treatment of pulmonary diseases. Owing to the thin alveolar-capillary barrier, and large surface area that facilitates rapid absorption to the bloodstream in the lung, systemic delivery can be achieved as well. Administration of multiple drugs at one time became urgent to control chronic pulmonary diseases such as asthma and COPD, thus, development of drug combinations was proposed. Administration of medications with variable dosages from different inhalers leads to overburdening the patient and may cause low therapeutic intervention. Therefore, products that contain combined drugs to be delivered via a single inhaler have been developed to improve patient compliance, reduce different dose regimens, achieve higher disease control, and boost therapeutic effectiveness in some cases. This comprehensive review aimed to highlight the growth of drug combinations by inhalation over time, obstacles and challenges, and the possible progress to broaden the current options or to cover new indications in the future. Moreover, various pharmaceutical technologies in terms of formulation and device in correlation with inhaled combinations were discussed in this review. Hence, inhaled combination therapy is driven by the need to maintain and improve the quality of life for patients with chronic respiratory diseases; promoting drug combinations by inhalation to a higher level is a necessity.

Exploring the influence of magnesium stearate content and mixing modality on the rheological properties and in vitro aerosolization of dry powder inhaler

Since carrier-based dry powder inhalers (DPIs) suffer from inadequate drug deposition in the lung, an increasing number of marketed products have added magnesium stearate (MgSt) to improve the aerosolization, dispersion, and stability against moisture of DPI. However, for carrier-based DPI, there is a lack of examination of the optimal MgSt content as well as the mixing modality, and there is also a need to verify the applicability of rheological properties to predict the in vitro aerosolization of DPI formulations containing MgSt. Therefore, in this work, DPI formulations were prepared using fluticasone propionate as a model drug and commercial crystalline lactose Respitose® SV003 as a carrier within 1% MgSt content, the effect of MgSt content on the rheological and aerodynamic properties were investigated. After the optimal MgSt content was determined, the effects of mixing modality, mixing order, and carrier size on formulation properties were further investigated. Meanwhile, correlations were established between rheological parameters and in vitro drug deposition parameters, and the contribution of rheological parameters were determined using principal component analysis (PCA). The results showed that the optimal content of MgSt in DPI formulations is 0.25%-0.5% under both high-shear and low-shear, using medium-sized carriers (D50 around 70 μm) and low-shear mixing are beneficial for improving in vitro aerosolization. Good linear relationships between powder rheological parameters such as basic flow energy (BFE), specific energy (SE), Permeability and fine particle fraction (FPF) were established, PCA showed that both flowability and adhesion are key properties affecting FPF. In conclusion, both MgSt content and mixing modality can influence rheological properties of the DPI, which can be used as a screeing tool for DPI formuluation and preparation process optimization.

Segregation in inhalable powders: Quantification of the effect of vibration on adhesive mixtures

The objective of this investigation was to study the effect of induced vibrations on adhesive mixtures containing budesonide and salbutamol sulphate as active pharmaceutical ingredients (APIs) and InhaLac 70 as carrier. A series of adhesive mixtures with varied API concentration (1-4%) was prepared for each API. Half of the adhesive mixture was stressed on a vibrating sieve under conditions resembling hopper flow. Based on scanning electron micrographs, it was concluded that InhaLac 70 contains particles of two distinct shapes, one irregular with groves and valleys and the other more regular with well defined edges. The dispersibility of the control and stressed mixtures was studied using a next generation impactor. The stressed mixtures containing 1 and 1.5% API displayed a significant reduction in fine particle dose (FPD) compared to the control. The reduction in FPD resulted from a loss of API from the adhesive mixture during vibration and as a consequence of restructuring and self agglomeration resulting in reduced dispersibility. However, no significant difference was observed for mixtures with larger weight fractions of API (2 and 4% API) but these have a drawback of reduced fine particle fraction (FPF). It is concluded that vibrations induced on the adhesive mixtures during handling potentially have a significant effect on the dispersibility of the API and the total amount of drug delivered to the lungs.

Smart Specification Setting for Dry Powder Inhalation Carriers

The specifications of excipients are important to pharmaceutical manufacturers to ensure that the final product can be manufactured robustly over the entire lifecycle of a drug product. Particle size specifications are key for dry powder inhalation excipients and they should be agreed between users and suppliers. The current paper evaluates two development strategies to set particle size specifications. It is shown that the application of quality-by-design principles to specification setting could result in broader specifications, while it guarantees that efficacy, safety and manufacturing of the medication is not affected. A multitude of reasons exist to keep specifications broader than the production capability range, including improved risk-mitigation and potentially reduced regulatory challenges during and after registration.

Delivery technology of inhaled therapy for asthma and COPD

Inhaled therapy is the cornerstone of the management of asthma and chronic obstructive pulmonary disease (COPD). Drugs such as bronchodilators and corticosteroids are administered directly to the airways for local effect and rapid onset of action while systemic exposure and side effects are minimized. There are four major types of inhaler devices used clinically to generate aerosols for inhalation, namely, pressurized metered-dose inhalers (pMDIs), nebulizers, Soft Mist™ inhalers (SMIs) and dry powder inhalers (DPIs). Each of them has its own unique characteristics that can target different patient groups. For instance, patients' inhaler technique is critical for pMDIs and SMIs to achieve proper drug deposition in the lung, which could be challenging for some patients. Nebulizers are designed to deliver aerosols to patients during tidal breathing, but they require electricity to operate and are less portable than other devices. DPIs are the only device that delivers aerosols in dry powder form with better stability, but they rely on patients' inspiration effort for powder dispersion, rendering them unsuitable for patients with compromised lung function. Choosing a device that can cater for the need of individual patient is paramount for effective inhaled therapy. This chapter provides an overview of inhaled therapy for the management of asthma and COPD. The operation principles, merits and limitations of different delivery technologies are examined. Looking ahead, the challenges of delivering novel therapeutics such as biologics through the pulmonary route are also discussed.