Effect of surfactants, temperature, and sonication on the virucidal activity of polyhexamethylene biguanide against the bacteriophage MS2

Multifunctional polymeric guanidine and hydantoin halamines with broad biocidal activity

Prolonged and excessive use of biocides during the coronavirus disease era calls for incorporating new antiviral polymers that enhance the surface design and functionality for existing and potential future pandemics. Herein, we investigated previously unexplored polyamines with nucleophilic biguanide, guanidine, and hydantoin groups that all can be halogenated leading to high contents of oxidizing halogen that enables enhancement of the biocidal activity. Primary amino groups can be used to attach poly(N-vinylguanidine) (PVG) and poly(allylamine-co-4-aminopyridine-co-5-(4-hydroxybenzylidene)hydantoin) (PAH) as well as a broad-spectrum commercial biocide poly(hexamethylene biguanide) (PHMB) onto a solid support. Halogenation of polymer suspensions was conducted through in situ generation of excess hypobromous acid (HBrO) from bromine and sodium hydroxide or by sodium hypochlorite in aqueous solutions, resulting in N-halamines with high contents of active > N-Br or > N-Cl groups. The virucidal activity of the polymers against human respiratory coronavirus HCoV-229E increased dramatically with their halogenation. Brominated PHMB-Br showed activation activity value > 5 even at 1 mg/L, and complete virus inhibition was observed with either PHMB-Br or PAH-Br at 10 mg/mL. Brominated PVG-Br and PAH-Br possessed fungicidal activity against C. albicans, while PHMB was fungistatic. PHMB, PHMB-Br and PAH polymers demonstrated excellent bactericidal activity against the methicillin-resistant S. aureus and vancomycin-resistant E. faecium. Brominated polymers (PHMB-Br, PVG-Br, PAH-Br) were not toxic to the HeLa monolayers, indicating acceptable biocompatibility to cultured human cells. With these features, the N-halamine polymers of the present study are a worthwhile addition to the arsenal of biocides and are promising candidates for development of non-leaching coatings.

An Overview of Diverse Strategies To Inactivate Enterobacteriaceae-Targeting Bacteriophages

Bacteriophages are viruses that infect bacteria and thus threaten industrial processes relying on the production executed by bacterial cells. Industries bear huge economic losses due to such recurring and resilient infections. Depending on the specificity of the process, there is a need for appropriate methods of bacteriophage inactivation, with an emphasis on being inexpensive and high efficiency. In this review, we summarize the reports on antiphagents, i.e., antibacteriophage agents on inactivation of bacteriophages. We focused on bacteriophages targeting the representatives of the Enterobacteriaceae family, as its representative, Escherichia coli, is most commonly used in the bio-industry. The review is divided into sections dealing with bacteriophage inactivation by physical factors, chemical factors, and nanotechnology-based solutions.

Improved virus concentration methods for wash waters from decontamination of permeable and non-permeable surfaces

Surface decontamination is a method of using wash water to decontaminated surfaces preventing transmission of biological contaminants that can pose potential health risks to responders and the public. However, the risks associated with handling used wash water are largely unknown due to the lack of effective methodology to screen for pathogenic microorganisms present in these samples, especially viral pathogens. This study adapted the dead-end hollow-fiber ultrafiltration (D-HFUF) system to wash waters, including a separate procedure for recovering particle attached viruses. Simulated wash water was created using dechlorinated tap water containing a mild surfactant (0.05 % Tween 80). To determine virus recovery efficiencies, measured amounts of somatic and F+ coliphage were spiked into 2-liter volumes of wash water under the following scenarios: (1) wash water was amended with a measured amount of sterile river sediment with no sediment separation prior to filter concentration; or (2) sediment added to wash water was allowed to settle prior to filter concentrating clarified liquid portions, while precipitated sediment was subjected to viral extraction techniques to recover particle attached virus; and (3) the optimized method was deployed on non-porous and porous surfaces to simulate a decontamination clean-up event. Separation of sediment prior to D-HFUF significantly increased recovery of coliphages, (P = <0.0001) versus filtration of sediment and liquids simultaneously. A tryptic soy broth (TSB) elution solution was significantly more effective (P = ≤0.010) for recovery of both somatic and F+ coliphage, (108 ± 9 % and 92 ± 9 %, respectively), compared to elution buffers containing various surfactants (sodium hexametaphosphate, Tween 80) for recovering particle attached virus. Simulating a biocontaminate clean-up event (using the optimized sediment separation and elution protocol) resulted in coliphage recoveries of 75-96 % (permeable surface) and 71-92 % (non-permeable surface). This procedure can be used to effectively detect viruses in used wash waters aiding in reducing risks to human health during site decontamination.

Antimicrobial and Virucidal Potential of Morpholinium-Based Ionic Liquids

Witnessed by the ongoing spread of antimicrobial resistant bacteria as well as the recent global pandemic of the SARS-CoV-2 virus, the development of new disinfection strategies is of great importance, and novel substance classes as effective antimicrobials and virucides are urgently needed. Ionic liquids (ILs), low-melting salts, have been already recognized as efficient antimicrobial agents with prospects for antiviral potential. In this study, we examined the antiviral activity of 12 morpholinium based herbicidal ionic liquids with a tripartite test system, including enzyme inhibition tests, virucidal activity determination against five model viruses and activity against five bacterial species. The antimicrobial and enzymatic tests confirmed that the inhibiting activity of ILs corresponds with the number of long alkyl side chains and that [Dec₂Mor]⁺ based ILs are promising candidates as novel antimicrobials. The virucidal tests showed that ILs antiviral activity depends on the type and structure of the virus, revealing enveloped Phi6 phage as highly susceptible to the ILs action, while the non-enveloped phages PRD1 and MS2 proved completely resistant to ionic liquids. Furthermore, a comparison of results obtained for P100 and P001 phages demonstrated for the first time that the susceptibility of viruses to ionic liquids can be dependent on differences in the phage tail structure.

Viral disinfection using nonthermal plasma: A critical review and perspectives on the plasma-catalysis system

The transmission of viral infections via aerosol has become a serious threat to public health. This has produced an ever-increasing demand for effective forms of viral inactivation technology/processes. Plasma technology is rising in popularity and gaining interest for viral disinfection use. Due to its highly effectively disinfection and flexible operation, non-thermal plasma (NTP) is a promising technology in decontaminating bacteria or virus from air or surfaces. This review discusses the fundamentals of non-thermal plasma and the disinfection mechanisms of the biocidal agents produced in plasma, including ultraviolet (UV) photons, reactive oxygen species, and reactive nitrogen species. Perspectives on the role of catalysts and its potential applications in cold plasma disinfection are discussed.

New insights into the antiviral activity of nordihydroguaiaretic acid: Inhibition of dengue virus serotype 1 replication

BACKGROUND

Dengue virus (DENV) is considered one of the most important pathogens in the world causing 390 million infections each year. Currently, the development of vaccines against DENV presents some shortcomings and there is no antiviral therapy available for its infection. An important challenge is that both treatments and vaccines must be effective against all four DENV serotypes. Nordihydroguaiaretic acid (NDGA), isolated from Larrea divaricata Cav. (Zygophyllaceae) has shown a significant inhibitory effect on a broad spectrum of viruses, including DENV serotypes 2 and 4.

PURPOSE

We evaluated the in vitro virucidal and antiviral activity of NDGA on DENV serotype 1 (DENV1), including the study of its mechanism of action, to provide more evidence on its antiviral activity.

METHODS

The viability of viral particles was quantified by the plaque-forming unit reduction method. NDGA effects on DENV1 genome and viral proteins were evaluated by qPCR and immunofluorescence, respectively. Lysosomotropic activity was assayed using acridine orange and neutral red dyes.

RESULTS

NDGA showed in vitro virucidal and antiviral activity against DENV1. The antiviral effect would be effective within the first 2 h after viral internalization, when the uncoating process takes place. In addition, we determined by qPCR that NDGA decreases the amount of intracellular RNA of DENV1 and, by immunofluorescence, the number of cells infected. These results indicate that the antiviral effect of NDGA would have an intracellular mechanism of action, which is consistent with its ability to be incorporated into host cells. Considering the inhibitory activity of NDGA on the cellular lipid metabolism, we compared the antiviral effect of two inhibitors acting on two different pathways of this type of metabolism: 1) resveratrol that inhibits the sterol regulatory element of binding proteins, and 2) caffeic acid that inhibits the 5-lipoxygenase (5-LOX) enzyme. Only caffeic acid produced an inhibitory effect on DENV1 infection. We studied the lysosomotropic activity of NDGA on host cells and found, for the first time, that this compound inhibited the acidification of cell vesicles which would prevent DENV1 uncoating process.

CONCLUSION

The present work contributes to the knowledge of NDGA activity on DENV. We describe its activity on DENV1, a serotype different to those that have been already reported. Moreover, we provide evidence on which stage/s of the viral replication cycle NDGA exerts its effects. We suggest that the mechanism of action of NDGA on DENV1 is related to its lysosomotropic effect, which inhibits the viral uncoating process.

Polyhexamethylene biguanide hydrochloride (PHMB)-properties and application of an antiseptic agent. A narrative review

The prevention and management of ocular surface infections is still one of the great challenges for ophthalmologists. The spread of antimicrobial resistance makes it necessary to use antiseptic substances with a broad antimicrobial spectrum. Polyhexamethylene biguanide hydrochloride (Polyhexanide, PHMB) is a broad-spectrum antiseptic with excellent tolerance and a low-risk profile. Its physicochemical action on the phospholipid membrane and DNA replication or repair mechanism, prevents or impedes the development of resistant bacterial strains. PHMB revealed its effective against numerous organisms like viruses, Gram-negative and Gram-positive bacteria, and fungi. Polyhexanide is commonly used as preservative in commercially available disinfecting solutions for contact lens care and in ophthalmic formulations at different concentrations ranging from 1 µg/ml to 50 µg/ml. The administration of 0.02% (200 µg/ml) PHMB is often the first-line therapy of Acanthamoeba keratitis. However, to date, only one close-out randomized controlled study tested the efficacy of 0.02% PHMB in Acanthamoeba keratitis and a phase III study is still ongoing. This paper reviews the antiseptic agent PHMB, focusing on biochemical mechanisms, safety profile and applications in ophthalmology.

The efficacy of different sanitizers against MS2 bacteriophage introduced onto plastic or stainless steel surfaces

The virucidal activities of 11 prepared disinfectant solutions (active ingredients of household sanitizers) and 10 household sanitizers against bacteriophage MS2 on plastic and stainless steel surfaces were studied. Among the prepared sanitizers, 70-90% ethanol and ethanol-based disinfectants resulted in 1-2.5 log PFU/mL reductions on both surfaces. The 70% isopropanol and isopropanol-based formula reduced MS2 by 0.7-1.5 log PFU/mL on both surfaces. Other disinfectants, containing 0.1% benzalkonium chloride (BAC), 0.5% hydrogen peroxide, or 4% acetic acid, showed significant (P < 0.05) lower log reductions (-0.17-0.55 log PFU/mL) compared with other treatments. At room temperature, the virucidal activities of 70% ethanol on plastic (1.46-1.64 log PFU/mL reductions) and stainless steel (0.84-0.93 log PFU/mL reductions) surfaces were not significantly (P > 0.05) affected by the treatment time (30-600 s). However, 85% ethanol-treated groups showed significant (P < 0.05) higher log reductions in 60 and 600 s treated groups (1.69-2.24 log PFU/mL) compared with those in 30 s treated groups (0.92-1.32 log PFU/mL). Their virucidal activities were further examined at low temperatures (4 and 8 °C). We observed that the surface inactivation efficacies were not affected by the low temperatures. In addition, the virucidal activities of household sanitizers revealed that sanitizers with 1.84% (pH = 12.5, ∼17,500 ppm free-chlorine concentrations) or 3% (pH = 13.1, ∼38,100 ppm free-chlorine concentrations) sodium hypochlorite (NaClO) reduced 4.15-6.23 log PFU/mL MS2 on hard surfaces after 60 s contact time. Furthermore, an approximately 1.5 log PFU/mL reduction was observed in groups treated by sanitizer H (active ingredients: 58% ethanol + 0.1% quaternary ammonium compound). Household products with BAC or organic acid resulted in -0.28-0.33 log reductions on two surfaces after 30 or 60 s treatment. Therefore, the use of ethanol and NaClO-based products should be considered as a potential surface decontamination strategy in the food industry.

Application of Chitosan Microparticles against Human Norovirus

ABSTRACT

Human norovirus (HuNoV) is the leading cause of foodborne illness outbreaks and the second most common cause of waterborne infections in the United States. The goal of this research was to investigate the antiviral activity of chitosan microparticles (CMs) against HuNoV GII.4 Sydney and its cultivable surrogate Tulane virus (TuV) in suspensions mimicking fecally contaminated water. CMs were prepared by cross-linking chitosan molecules with sodium sulfate, and the antiviral activity of CMs was assessed with an infectivity assay on TuV and by quantitative reverse transcription PCR on TuV and HuNoV. A 3% CM suspension in phosphate-buffered saline (pH 7.2) bound to TuV particles but had a negligible impact on virus infectivity (P > 0.05). A 10-min contact time resulted in a 1.5-log reduction in genomic copies per mL of TuV and HuNoV in fecal suspensions (P < 0.05). Despite the negligible impact on viral infectivity, CMs can moderately bind to infectious virus particles and help purify environmental water by removing these particles. In this study, TuV was a suitable surrogate for HuNoV with similar log reductions in fecal suspension. These findings highlight the potential application of CM as a novel treatment to minimize the spread of waterborne viral pathogens.

HIGHLIGHTS

Laboratory-scale waste stabilisation pond development

The present study describes the development of a laboratory-scale waste stabilisation pond (WSP) system, undertaken in order to investigate the effects of hydraulic, physicochemical, microbial and physical parameters on wastewater treatment. Previous studies have focused predominantly on hydraulic characteristics. This system was engineered at a scale much smaller than had previously been seen in the literature. The scale of the model used here allows for improved optimisation at a shorter time scale that would be seen for larger pilot-scale systems. Additionally, with the addition of viruses, a smaller scale model allows for more control over viral concentration used. Once constructed, the system was dosed with wastewater from a wastewater treatment plant and both the influent and effluent were monitored using common testing methods as well as direct viral analysis. Successful wastewater treatment was seen in terms of reduction of indicator bacteria and virus, as determined by culture-based methods. This treatment and the associated stabilisation of physicochemical parameters such as dissolved oxygen and pH, indicates the successful development of a microbial community within the laboratory-scale WSP.

Survival of MS2 and Φ6 viruses in droplets as a function of relative humidity, pH, and salt, protein, and surfactant concentrations

The survival of viruses in droplets is known to depend on droplets' chemical composition, which may vary in respiratory fluid between individuals and over the course of disease. This relationship is also important for understanding the persistence of viruses in droplets generated from wastewater, freshwater, and seawater. We investigated the effects of salt (0, 1, and 35 g/L), protein (0, 100, and 1000 μg/mL), surfactant (0, 1, and 10 μg/mL), and droplet pH (4.0, 7.0, and 10.0) on the viability of viruses in 1-μL droplets pipetted onto polystyrene surfaces and exposed to 20%, 50%, and 80% relative humidity (RH) using a culture-based approach. Results showed that viability of MS2, a non-enveloped virus, was generally higher than that of Φ6, an enveloped virus, in droplets after 1 hour. The chemical composition of droplets greatly influenced virus viability. Specifically, the survival of MS2 was similar in droplets at different pH values, but the viability of Φ6 was significantly reduced in acidic and basic droplets compared to neutral ones. The presence of bovine serum albumin protected both MS2 and Φ6 from inactivation in droplets. The effects of sodium chloride and the surfactant sodium dodecyl sulfate varied by virus type and RH. Meanwhile, RH affected the viability of viruses as shown previously: viability was lowest at intermediate to high RH. The results demonstrate that the viability of viruses is determined by the chemical composition of carrier droplets, especially pH and protein content, and environmental factors. These findings emphasize the importance of understanding the chemical composition of carrier droplets in order to predict the persistence of viruses contained in them.

Bactericidal efficacy of potassium peroxymonosulfate under various concentrations, organic material conditions, exposure timing and its application on various surface carriers

Four concentrations of potassium peroxymonosulfate (PPMS) were evaluated for bactericidal activities and indicated that the concentration is less than the manufacturing-recommended concentrations, must extend the exposure time for bacterial inactivation. However, even with and without of organic material contamination, did not show marked inactivation difference. In addition, all concentrations were inactivated on all carrier surfaces within 30 sec, except on rubber where inactivation occurred within 1 min. However, quaternary ammonium compounds were inactivated on stainless steel and plastic within 1 min and 30 sec, respectively, but not inactivated within 5 min on rubber surfaces. Conclusion, PPMS inactivated bacteria under optimal concentration, organic material conditions, exposure timing and on carrier surfaces which can useful as an alternative disinfectant for biosecurity enhancement.

Virucidal Efficacy of a Quaternary Ammonium Compound with Food Additive-Grade Calcium Hydroxide Toward Avian Influenza Virus and Newcastle Disease Virus on Abiotic Carriers

The virucidal efficacies of a 0.2% food additive-grade calcium hydroxide [FdCa(OH)₂] solution, a quaternary ammonium compound (QAC) diluted at 1:500 (QACx500), and their mixture [Mix500; FdCa(OH)₂ powder added at a final concentration of 0.2% to QACx500] were investigated as fomites for avian influenza virus (AIV) and Newcastle disease virus (NDV) on abiotic carriers (steel, rubber, and plastic) at two different temperatures (room temperature [RT; 25 ± 2 C] and 2 C). These viruses were seeded on coupons (5 cm×5 cm) of rubber, steel, or plastic with 5% fetal bovine serum. After complete drying, the coupons were covered with the test solutions at RT or 2 C. After fixed incubation periods, viruses were recovered from the coupons and titrated. At RT, Mix500 required a short time (3 min) to inactivate AIV and NDV to effective levels (≥3 log virus reduction) on rubber, steel, and plastic carriers compared with QAC or FdCa(OH)_2. At low temperature, QACx500 inactivated AIV on steel and plastic carriers to effective levels within 60 min, whereas Mix500 did so within 10 min. QACx500 and FdCa(OH)₂ solutions could inactivate NDV on steel and plastic carriers within 20 and 10 min, respectively, and Mix500 could do so within 3 min. Viruses on the carriers required longer incubation periods for inactivation at 2 C than at 25 C. These results demonstrate desirable synergistic virucidal effects of Mix500 for important poultry viruses on abiotic carriers, while indicating high applicability within poultry farming.

Bactericidal efficacies of food additive grade calcium hydroxide toward Legionella pneumophila

Food additive grade calcium hydroxide (FdCa(OH)₂) in the solution of 0.17% was evaluated for its bactericidal efficacies toward Legionella pneumophila with or without sodium hypochlorite (NaOCl) at a concentration of 200 ppm total residual chlorine, at room temperature (RT) (25°C ± 2°C) and 42°C, either with or without 5% fetal bovine serum (FBS). Besides, FdCa(OH)₂ in different concentration solutions were prepared in field water samples (hot spring and bath tab water) and evaluated for their bactericidal efficacies at 42°C. FdCa(OH)₂ (0.17%) inactivated the L. pneumophila to the undetectable level (<2.6 log CFU/ml) within 5 min and 3 min, respectively, at RT and 42°C, with 5% FBS. At RT and 42°C, NaOCl inactivated L. pneumophila to the undetectable level within 5 min, without 5% FBS, but with 5% FBS, it could only inactivate this bacterium effectively (≥3 log reductions). Conversely, at RT and 42°C, the mixture of 0.17% FdCa(OH)₂ and 200 ppm NaOCl could inactivate L. pneumophila to the undetectable level, respectively, within 3 min and 1 min, even with 5% FBS, and it was elucidated that FdCa(OH)₂ has a synergistic bactericidal effect together with NaOCl. FdCa(OH)₂ 0.05% solution prepared in hot spring water could inactivate L. pneumophila to the undetectable within 3 min at 42°C. So, FdCa(OH)₂ alone could show nice bactericidal efficacy at 42°C, even with 5% FBS, as well as in field water samples.

Don't Shut the Stable Door after the Phage Has Bolted-The Importance of Bacteriophage Inactivation in Food Environments

In recent years, a new potential measure against foodborne pathogenic bacteria was rediscovered-bacteriophages. However, despite all their advantages, in connection to their widespread application in the food industry, negative consequences such as an uncontrolled phage spread as well as a development of phage resistant bacteria can occur. These problems are mostly a result of long-term persistence of phages in the food production environment. As this topic has been neglected so far, this article reviews the current knowledge regarding the effectiveness of disinfectant strategies for phage inactivation and removal. For this purpose, the main commercial phage products, as well as their application fields are first discussed in terms of applicable inactivation strategies and legal regulations. Secondly, an overview of the effectiveness of disinfectants for bacteriophage inactivation in general and commercial phages in particular is given. Finally, this review outlines a possible strategy for users of commercial phage products in order to improve the effectiveness of phage inactivation and removal after application.

Bactericidal efficacy of a quaternary ammonium compound with food additive grade calcium hydroxide toward Salmonella Infantis and Escherichia coli on abiotic carriers

The bactericidal efficacies of 0.2% food additive grade calcium hydroxide (FdCa(OH)2) solution, a quaternary ammonium compound (QAC) diluted at 1:500 (QACx500) and their mixture-Mix500 (FdCa(OH)2 powder added at final concentration 0.2% to QACx500)-were investigated at two different temperatures (room temperature (RT) (25 ± 2°C) and 2°C), using varying contact time, with or without presence of organic materials (5% fetal bovine serum: FBS), either in suspension or on abiotic carrier (steel, rubber and plastic). In the suspension test, QACx500 could inactivate Salmonella Infantis at effective level (≥3 log reductions), within 30 sec and 5 sec, respectively, with or without 5% FBS at RT; however, at 2°C it required 30 min and 1 min, respectively. Mix500 revealed the same efficacy as QACx500 at RT, but, at 2°C it required 1 min and 30 sec, respectively with or without FBS. Whereas, 0.2% FdCa(OH)2 solution alone could inactivate S. Infantis within 1 min and 3 min, respectively at RT and 2°C, even with 5% FBS. In the carrier test, single disinfectant required bit more (3 or 5 min) contact time to reduce bacterial load (S. Infantis or Escherichia coli) down to the effective level on rubber surface than that on steel and plastic surface. However, Mix500 could inactivate both bacteria on carrier surfaces within 1 min, even at 2°C. Thus, synergistic effects were observed in the suspension test and the carrier test at both temperatures toward both bacteria.

An efficient virus aerosol sampler enabled by adiabatic expansion

Protection of public health against pathogenic viruses transmitted through the airborne route requires effective sampling of airborne viruses for determination of their concentration and distribution. However, sampling viable airborne viruses is challenging as conventional bioaerosol sampling devices operate on inertia-based mechanisms that inherently have low sampling efficiency for virus aerosols in the ultrafine size range (< 100 nm). Herein, a Batch Adiabatic-expansion for Size Intensification by Condensation (BASIC) approach was developed for efficient sampling of virus aerosols. The BASIC utilizes adiabatic expansion in a supersaturated container to activate condensation of water vapor onto virus aerosol particles, thus amplifying the size of the particles by orders of magnitude. Using aerosolized MS2 bacteriophage, the BASIC's performance was evaluated and optimized both from the perspectives of physical size amplification as well as preservation of the viability of the MS2 bacteriophage. Experimental results show that one compression/expansion (C/E) cycle under a compression pressure of 103.5 kPa and water temperature of 25 °C was sufficient to increase the particle diameter from < 100 nm to > 1 µm; further increases in the number of C/E cycles neither increased particle number concentration nor diameter. An increase in compression pressure was associated with physical size amplification and a higher concentration of collected viable MS2. Water temperature of 40 °C was found to be the optimal for size amplification as well as viability preservation. No significant effect on particle size enlargement was observed by changing the dwell time after expansion. The results illustrate the BASIC's capability as a simple, quick and inexpensive tool for rapid sampling of viable airborne viruses.

Efficacy evaluation of commercial disinfectants by using Salmonella enterica serovar Typhimurium as a test organism

The efficacies of six commercial disinfectants were evaluated by using Salmonella enterica serovar Typhimurium under simulated natural conditions such as sub-zero temperature, short disinfecting time, and surface type (uneven or smooth). We used a suspensionmodel test to determine the disinfecting efficacy under varying contact times (1, 5, 10, and 30 min) and temperatures (25°C, 4°C, 0°C, and -10°C). The bactericidal effect according to surface structure was measured by using a carriermodel test at 25°C and -10°C. The effective concentrations of each disinfectant were fixed to give a disinfecting effect within a short time (< 1 min) at 25°C and -10°C. The suspension model results revealed that bactericidal efficacy significantly dropped at low temperature for most of the disinfectants used; a sodium dichloroisocyanurate product showed the strongest efficacy. In the carrier test, bacterial load on a wooden surface was more difficult to remove than that on a stainless-steel surface. The results show that commercial disinfectant products vary in their disinfecting efficacy, which is affected by several field factors including temperature, contact time, and carrier material. Environmental conditions and surface type for disinfection should be considered prior to selecting an optimal disinfectant in the field.

Microbiological interactions with cold plasma

There is a diverse range of microbiological challenges facing the food, healthcare and clinical sectors. The increasing and pervasive resistance to broad-spectrum antibiotics and health-related concerns with many biocidal agents drives research for novel and complementary antimicrobial approaches. Biofilms display increased mechanical and antimicrobial stability and are the subject of extensive research. Cold plasmas (CP) have rapidly evolved as a technology for microbial decontamination, wound healing and cancer treatment, owing to the chemical and bio-active radicals generated known collectively as reactive oxygen and nitrogen species. This review outlines the basics of CP technology and discusses the interactions with a range of microbiological targets. Advances in mechanistic insights are presented and applications to food and clinical issues are discussed. The possibility of tailoring CP to control specific microbiological challenges is apparent. This review focuses on microbiological issues in relation to food- and healthcare-associated human infections, the role of CP in their elimination and the current status of plasma mechanisms of action.

Efficient collection of viable virus aerosol through laminar-flow, water-based condensational particle growth

AIMS

State-of-the-art bioaerosol samplers have poor collection efficiencies for ultrafine virus aerosols. This work evaluated the performance of a novel growth tube collector (GTC), which utilizes laminar-flow water-based condensation to facilitate particle growth, for the collection of airborne MS2 viruses.

METHODS AND RESULTS

Fine aerosols (<500 nm) containing MS2 coliphage were generated from a Collison nebulizer, conditioned by a dilution dryer and collected by a GTC and a BioSampler. The GTC effectively condensed water vapour onto the virus particles, creating droplets 2-5 μm in diameter, which facilitated collection. Comparison of particle counts upstream and downstream revealed that the GTC collected >93% of the inlet virus particles, whereas the BioSampler's efficiency was about 10%. Viable counts of the GTC-collected viruses were also one order of magnitude higher than those of the BioSampler (P = 0·003).

CONCLUSION

The efficiency of the GTC for the viable collection of MS2 viruses exceeds that of industry standard instrument, the BioSampler, by a factor of 10-100.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study reveals that the GTC is an effective collector of viable MS2 aerosols, and concludes the instrument will be an effective tool for studying viable virus aerosols and the inhalation risks posed by airborne viruses.

Characterization and control of surfactant-mediated Norovirus interactions

Understanding of the colloidal interactions of Norovirus particles in aqueous medium could provide insights on the origins of the notorious stability and infectivity of these widespread viral agents. We characterized the effects of solution pH and surfactant type and concentration on the aggregation, dispersion, and disassembly of Norovirus virus-like particles (VLPs) using dynamic light scattering, electrophoretic light scattering, and transmission electron microscopy. Owing to net negative surface charge of the VLPs at neutral pH, low concentrations of cationic surfactant tend to aggregate the VLPs, whereas low concentrations of anionic surfactant tend to disperse the particles. Increasing the concentration of these surfactants beyond their critical micelle concentration leads to virus capsid disassembly and breakdown of aggregates. Non-ionic surfactants, however, had little effect on virus interactions and likely stabilized them additionally in suspension. The data were interpreted on the basis of simple models for surfactant binding and re-charging of the virus capsid. We used zeta potential data to characterize virus surface charge and interpret the mechanisms behind these demonstrated surfactant-virus interactions. The fundamental understanding and control of these interactions will aid in practical formulations for virus inactivation and removal from contaminated surfaces.

Inactivation of coxsackievirus B4, feline calicivirus and herpes simplex virus type 1: unexpected virucidal effect of a disinfectant on a non-enveloped virus applied onto a surface

OBJECTIVE

To evaluate the effect of a disinfectant onto viruses in suspension on the one hand and applied onto a surface on the other.

METHODS

A system combining flocked swabs to recover viruses dried onto stainless steel carriers and gel filtration to eliminate cytotoxic products has been developed to study the virucidal effect of a quaternary ammonium-based disinfectant towards herpes simplex virus type 1 (HSV-1), coxsackievirus B4 (CVB4) and feline calicivirus F9 (FCV). The recovery of FCV has been estimated by RT real-time PCR.

RESULTS

HSV-1, CVB4 and FCV had a titer over 10(4) TCID50 · ml(-1) after 2 h drying and were recovered from the carriers using flocked swabs. HSV-1 was inactivated in suspension and on stainless steel carriers by the disinfectant (a reduction factor of 4 and 2.83 log, respectively) whereas CVB4 was resistant. The reduction of infectious titer was moderate, 1.5 log in 30 min, when FCV was in suspension, whereas it was up to 4 log in 10 min when the virus was dried on a carrier. Dried FCV was efficiently recovered from carriers as demonstrated by RT real-time PCR.

CONCLUSION

A non-enveloped virus, FCV, applied on a surface, but not in suspension, was inactivated by a quaternary ammonium-based disinfectant. The resistance of viruses applied onto a surface to the effect of disinfectants should be investigated further.

Evaluation of polyhexamethylene biguanide (PHMB) as a disinfectant for adenovirus

IMPORTANCE

Swimming pools can be a vector for transmission of adenovirus ocular infections. Polyhexamethylene biguanide (PHMB) is a disinfectant used in swimming pools and hot tubs.

OBJECTIVE

To determine whether PHMB is an effective disinfectant against ocular adenovirus serotypes at a concentration used to disinfect swimming pools and hot tubs.

DESIGN

In vitro laboratory study.

INTERVENTIONS

The direct disinfecting activity of PHMB was determined in triplicate assays by incubating 9 human adenovirus types (1, 2, 3, 4, 5, 7a, 8, 19, and 37) with PHMB concentrations of 50 and 0 ppm (micrograms per milliliter) for 24 hours at room temperature to simulate swimming pool temperatures or 40oC to simulate hot tub temperatures.

MAIN OUTCOME MEASURES

Plaque assays were performed to determine adenovirus titers after incubation. Titers were log10 converted and mean (SD) log10 reductions relative to controls were calculated. Virucidal (>99.9%) decreases in mean adenovirus titers after PHMB treatment were determined for each adenovirus type and temperature tested. RESULTS At room temperature, 50 ppm of PHMB produced mean reductions in titers less than 1 log10 for all adenovirus types tested. At 40°C, 50 ppm of PHMB produced mean reductions in titers less than 1 log10 for 2 adenovirus types and greater than 1 but less than 3 log10 for 7 of 9 adenovirus types.

CONCLUSIONS AND RELEVANCE

At a concentration of 50 ppm, PHMB was not virucidal against adenovirus at temperatures consistent with swimming pools or hot tubs. Recreational water maintained and sanitized with PHMB can serve as a vector for the transmission of ocular adenovirus infections.

PHMB: an effective antimicrobial in wound bioburden management

The effective management of bacterial bioburden is an essential element of wound care. Recent years have seen the increased use of topical antimicrobial dressings to control colonisation and infection, yet there is concern that some may inhibit wound healing and may have systemic sequelae (World Union of Wound Healing Societies (WUWHS), 2008). This article focuses on the safety and effectiveness of PHMB, an antimicrobial compound that is relatively underused in the UK, and argues that it is an effective option for the management of bacterial colonisation and infection.

Antiviral properties of polymeric aziridine- and biguanide-modified core-shell magnetic nanoparticles

Polycationic superparamagnetic nanoparticles (∼150-250 nm) were evaluated as virucidal agents. The particles possess a core-shell structure, with cores consisting of magnetite clusters and shells of functional silica covalently bound to poly(hexamethylene biguanide) (PHMBG), polyethyleneimine (PEI), or PEI terminated with aziridine moieties. Aziridine was conjugated to the PEI shell through cationic ring-opening polymerization. The nanometric core-shell particles functionalized with biguanide or aziridine moieties are able to bind and inactivate bacteriophage MS2, herpes simplex virus HSV-1, nonenveloped infectious pancreatic necrosis virus (IPNV), and enveloped viral hemorrhagic septicaemia virus (VHSV). The virus-particle complexes can be efficiently removed from the aqueous milieu by simple magnetocollection.