Ultraviolet germicidal irradiation of influenza-contaminated N95 filtering facepiece respirators

Feasibility analysis of inactivating influenza A(H1N1) virus using UVC robot in classroom environment

Background

Starting from 2009, H1N1 has been one of the respiratory diseases that afflict the global population. Concurrently, due to the influence of COVID-19, it has become widely accepted that preventing the virus's spread necessitates personal protection measures and disinfection in public spaces.

Experiments

This study conducted two experiments. In the classroom experiment, six UVC dose test points were calibrated to test whether the UVC dose at each testing point met the standards for inactivating IAVs and the time required to meet the standards. In the simulated classroom experiment, seven square slides made of IAVs were placed. After 10 min of robot movement, irradiated sterile square slides were made into suspension and injected into chicken embryos. Cultivate chicken embryos and conduct IAVs testing.

Results

Classroom experiment has shown that 5 testing points can meet the standards for inactivating IAVs(3 mJ/cm2), with a required time of 80 min, 40 min, 15 min, 5 min and 10 min. The UVC dose for testing points that do not meet the standards in 80 min is only 0.5 mJ/cm2. The simulation classroom experiment outcomes revealed that 99.99 % of IAVs were deactivated. Furthermore, this study established both a desktop control group and a chair arm control group, both of which yielded identical results, indicating an inactivation logarithm of IAVs≥4log.

Conclusion

The study presented that IAVs on the surface of an object can be effectively and rapidly deactivated at an irradiation density of 1.8 mW/cm2. Meanwhile, the study provides evidence of the feasibility of using the GXU robot to inactivate IAVs in a classroom environment.

N95 respirator hybrid decontamination method using Ultraviolet Germicidal Irradiation (UVGI) coupled with Microwave-Generated Steam (MGS)

The Coronavirus Disease 2019 (COVID-19) pandemic has induced a critical supply of personal protective equipment (PPE) especially N95 respirators. Utilizing respirator decontamination procedures to reduce the pathogen load of a contaminated N95 respirator can be a viable solution for reuse purposes. In this study, the efficiency of a novel hybrid respirator decontamination method of ultraviolet germicidal irradiation (UVGI) which utilizes ultraviolet-C (UV-C) rays coupled with microwave-generated steam (MGS) against feline coronavirus (FCoV) was evaluated. The contaminated 3M 1860 respirator pieces were treated with three treatments (UVGI-only, MGS-only, and Hybrid-UVGI + MGS) with variable time. The virucidal activity was evaluated using the TCID50 method. The comparison of decontamination efficiency of the treatments indicated that the hybrid method achieved at least a pathogen log reduction of 4 logs, faster than MGS and UVGI. These data recommend that the proposed hybrid decontamination system is more effective comparatively in achieving pathogen log reduction of 4 logs.

Photodegradation of polylactic acid: Characterisation of glassy and melt behaviour as a function of molecular weight

During the COVID-19 pandemic, UV-C germicidal lamps became widely available, even for household applications. However, their long-term degradation effects on the mechanical and rheological properties of polylactic acid (PLA) are still not well established. The relationship between degradation and its effects on the molecular structure and macroscale properties are hardly known. In this study, we investigated the effects of long-term exposure to UV-C irradiation on the properties of PLA and interpreted the results at the molecular scale. We performed gel permeation chromatography, Fourier-transform infrared spectroscopy and UV-Vis spectroscopy to analyse changes in chemical structure induced by the UV-irradiation. Then, we carried out thermal, rheological and tensile tests to investigate mechanical and melting properties, and we investigated the applicability of these test results to estimate molecular weight loss. We have created a 3D irradiation map that can facilitate the design of disinfection devices. Based on our results, we propose a maximum number of sterilisation cycles (13 cycles) for the tested PLA films that do not result in significant changes in tensile strength and modulus.

Moist heat as a promising method to decontaminate N95 masks: A large scale clinical study comparing four decontamination modalities-moist heat, steam, ultraviolet-C irradiation, and hydrogen peroxide plasma

BACKGROUND

Early in the COVID-19 pandemic, there was a global shortage of masks. Although mask reprocessing was practiced, no clinical study has assessed systematically the impact of repeated cycles of wear and decontamination on the integrity of N95 filtering facepiece respirators (FFRs).

METHODS

We evaluated mask fit assessed by qualitative respirator fit test (QRFT) after each cycle of wear and decontamination, as well as four measures of mask integrity-bacterial filtration efficacy, particle filtration efficacy, differential pressure, and splash resistance through five cycles of wear and decontamination using one of the four modalities (moist heat, steam, ultraviolet-C irradiation, and hydrogen peroxide plasma).

RESULTS

A total of 60.6% (hydrogen peroxide plasma) to 77.5% (moist heat) of the FFRs passed five cycles of wear and decontamination, as assessed by the wearers passing QRFT all five times. Moist heat-decontaminated FFRs retained all technical measures of integrity through all five cycles.

CONCLUSIONS

This is the first large-scale study to assess systematically the impact (clinically and quantitatively) on N95 FFR integrity of repeated cycles of wearing followed by decontamination. Our results suggest that moist heat is a promising method for decontaminating N95 FFRs. Performing QRFT after every cycle of wear and decontamination ensures wearer safety. Although there is currently no mask shortage, reprocessing may reduce medical waste and improve sustainability.

Biorisk Management Features of a Temporary COVID-19 Hospital

Introduction

Yale University designed and constructed a temporary field hospital for 100 COVID-19 symptomatic patients. Conservative biocontainment decisions were made in design and operational practices. Objectives of the field hospital included the safe flow of patients, staff, equipment and supplies, and obtaining approval by the Connecticut Department of Public Health (CT DPH) for opening as a field hospital.

Methods

The CT DPH regulations for mobile hospitals were used as primary guidance for the design, equipment, and protocols. References for BSL-3 and ABSL-3 design from the National Institutes of Health (NIH) and Tuberculosis isolation rooms from the United States Centers for Disease Control and Prevention (CDC) were also utilized. The final design involved an array of experts throughout the university.

Results and Conclusion

Vendors tested and certified all High Efficiency Particulate Air (HEPA) filters and balanced the airflows inside the field hospital. Yale Facilities designed and constructed positive pressure access and exit tents within the field hospital, established appropriate pressure relationships between zones, and added Minimum Efficiency Reporting Value 16 exhaust filters. The BioQuell ProteQ Hydrogen Peroxide decontamination unit was validated with biological spores in the rear sealed section of the biowaste tent. A ClorDiSys Flashbox UV-C Disinfection Chamber was also validated. Visual indicators were placed the doors of the pressurized tents and spaced throughout the facility to verify airflows. The plans created to design, construct and operate the field hospital provide a blueprint for recreating and reopening a field hospital in the future if ever needed at Yale University.

Physicochemical Properties of UV-Irradiated, Biaxially Oriented PLA Tubular Scaffolds

PLA and its blends are the most extensively used materials for various biomedical applications such as scaffolds, implants, and other medical devices. The most extensively used method for tubular scaffold fabrication is by using the extrusion process. However, PLA scaffolds show limitations such as low mechanical strength as compared to metallic scaffolds and inferior bioactivities, limiting their clinical application. Thus, in order to improve the mechanical properties of tubular scaffolds, they were biaxially expanded, wherein the bioactivity can be improved by surface modifications using UV treatment. However, detailed studies are needed to study the effect of UV irradiation on the surface properties of biaxially expanded scaffolds. In this work, tubular scaffolds were fabricated using a novel single-step biaxial expansion process, and the surface properties of the tubular scaffolds after different durations of UV irradiation were evaluated. The results show that changes in the surface wettability of scaffolds were observed after 2 min of UV exposure, and wettability increased with the increased duration of UV exposure. FTIR and XPS results were in conjunction and showed the formation of oxygen-rich functional groups with the increased UV irradiation of the surface. AFM showed increased surface roughness with the increase in UV duration. However, it was observed that scaffold crystallinity first increased and then decreased with the UV exposure. This study provides a new and detailed insight into the surface modification of the PLA scaffolds using UV exposure.

Photoactive decontamination and reuse of face masks

The corona virus disease 2019 (COVID-19) pandemic has led to global shortages in disposable respirators. Increasing the recycling rate of masks is a direct, low-cost strategy to mitigate COVID-19 transmission. Photoactive decontamination of used masks attracts great attention due to its fast response, remarkable virus inactivation effect and full protection integrity. Here, we review state-of-the-art situation of photoactive decontamination. The basic mechanism of photoactive decontamination is firstly discussed in terms of ultraviolet, photothermal or photocatalytic properties. Among which, ultraviolet radiation damages DNA and RNA to inactivate viruses and microorganisms, and photothermal method damages them by destroying proteins, while photocatalysis kills them by destroying the structure. The practical applications of photoactive decontamination strategies are then fully reviewed, including ultraviolet germicidal irradiation, and unconventional masks made of functional nanomaterials with photothermal or photocatalytic properties. Their performance requirements are elaborated together with the advantages of long-term recycle use. Finally, we put forward challenges and prospects for further development of photoactive decontamination technology.

Conservation Practices for Personal Protective Equipment: A Systematic Review with Focus on Lower-Income Countries

During the start of the COVID-19 pandemic, shortages of personal protective equipment (PPE) necessitated unprecedented and non-validated approaches to conserve PPE at healthcare facilities, especially in high income countries where single-use disposable PPE was ubiquitous. Our team conducted a systematic literature review to evaluate historic approaches for conserving single-use PPE, expecting that lower-income countries or developing contexts may already be uniquely conserving PPE. However, of the 50 included studies, only 3 originated from middle-income countries and none originated from low-income countries. Data from the included studies suggest PPE remained effective with extended use and with multiple or repeated use in clinical settings, as long as donning and doffing were performed in a standard manner. Multiple decontamination techniques were effective in disinfecting single use PPE for repeated use. These findings can inform healthcare facilities and providers in establishing protocols for safe conservation of PPE supplies and updating existing protocols to improve sustainability and overall resilience. Future studies should evaluate conservation practices in low-resource settings during non-pandemic times to develop strategies for more sustainable and resilient healthcare worldwide.

Filtration performance, fit test and side effects of respiratory personal protective equipment following decontamination: Observations for user safety and comfort

OBJECTIVE

While facing personal protective equipment (PPE) shortages during the COVID-19 pandemic, several institutions looked to PPE decontamination and reuse options. This study documents the effect of two hydrogen peroxide treatments on filtration efficiency and fit tests as well as the side effects for volunteers after the decontamination of N95 filtering facepiece respirators (FFRs). We also propose an efficient and large-scale treatment protocol that allows for the traceability of this protective equipment in hospitals during PPE shortages.

METHODS

The effects of low-temperature hydrogen peroxide sterilization and hydrogen peroxide vapor (HPV) on two FFR models (filtration, decontamination level, residual emanation) were evaluated. Ten volunteers reported comfort issues and side effects after wearing 1h FFRs worn and decontaminated up to five times.

RESULTS

The decontamination process does not negatively affect FFR efficiency, but repeated use and handling tend to lead to damage, limiting the number of times FFRs can be reused. Moreover, the recommended 24-h post-treatment aeration does not sufficiently eliminate residual hydrogen peroxide. Prolonged aeration time increased user comfort when using decontaminated FFRs.

CONCLUSIONS

HPV and low-temperature hydrogen peroxide sterilization seem to be appropriate treatments for FFR decontamination when the PPE is reused by the same user. PPE decontamination and reuse methods should be carefully considered as they are critical for the comfort and safety of healthcare workers.

Effectiveness of a low-cost UVGI chamber for decontaminating filtering facepiece respirators to extend reuse

In emergencies like the COVID-19 pandemic, the reuse or reprocessing of filtering facepiece respirators (FFRs) may be required to mitigate exposure risk. Research gap: Only a few studies evaluated decontamination effectiveness against SARS-CoV-2 that are practical for low-resource settings. This study aimed to determine the effectiveness of a relatively inexpensive ultraviolet germicidal irradiation chamber to decontaminate FFRs contaminated with SARS-CoV-2. A custom-designed UVGI chamber was constructed to determine the ability to decontaminate seven FFR models including N95s, KN95, and FFP2s inoculated with SARS-CoV-2. Vflex was excluded due to design folds/pleats and UVGI shadowing inside the chamber. Structural and functional integrity tolerated by each FFR model on repeated decontamination cycles was assessed. Twenty-seven participants were fit-tested over 30 cycles for each model and passed if the fit factor was ≥100. Of the FFR models included for testing, only the KN95 model failed filtration. The 3M™ 3M 1860 and Halyard™ duckbill 46727 (formerly Kimberly Clark) models performed better on fit testing than other models for both pre-and-post decontaminations. Fewer participants (0.3 and 0.7%, respectively) passed fit testing for Makrite 9500 N95 and Greenline 5200 FFP2 and only two for the KN95 model post decontamination. Fit testing appeared to be more affected by donning & doffing, as some passed with adjustment and repeat fit testing. A ≥ 3 log reduction of SARS-CoV-2 was achieved for worn-in FFRs namely Greenline 5200 FFP2. Conclusion: The study showed that not all FFRs tested could withstand 30 cycles of UVGI decontamination without diminishing filtration efficiency or facial fit. In addition, SARS-CoV-2 log reduction varied across the FFRs, implying that the decontamination efficacy largely depends on the decontamination protocol and selection of FFRs. We demonstrated the effectiveness of a low-cost and scalable decontamination method for SARS-CoV-2 and the effect on fit testing using people instead of manikins. It is recognized that extensive experimental evidence for the reuse of decontaminated FFRs is lacking, and thus this study would be relevant and of interest in crisis-capacity settings, particularly in low-resource facilities.

Application of Ultraviolet-C Radiation and Gaseous Ozone for Microbial Inactivation on Different Materials

With the advent of the COVID-19 pandemic, there has been a global incentive for applying environmentally sustainable and rapid sterilization methods, such as ultraviolet-C radiation (UVC) and ozonation. Material sterilization is a requirement for a variety of industries, including food, water treatment, clothing, healthcare, medical equipment, and pharmaceuticals. It becomes inevitable when devices and items like protective equipment are to be reused on/by different persons. This study presents novel findings on the performance of these sterilization methods using four microorganisms (Escherichia coli , Staphylococcus aureus , Candida albicans , and Aspergillus fumigatus) and six material substrates (stainless steel, polymethyl methacrylate, copper, surgical facemask, denim, and a cotton-polyester fabric). The combination of both ozone and UVC generally yields improved performance compared to their respective applications for the range of materials and microorganisms considered. Furthermore, the effectiveness of both UVC and ozone was higher when the fungi utilized were smeared onto the nonabsorbent materials than when 10 μL droplets were placed on the material surfaces. This dependence on the contaminating liquid surface area was not exhibited by the bacteria. This study highlights the necessity of adequate UVC and ozone dosage control as well as their synergistic and multifunctional attributes when sterilizing different materials contaminated with a wide range of microorganisms.

Plasma-generated reactive water mist for disinfection of N95 respirators laden with MS2 and T4 bacteriophage viruses

Due to the shortage of personal protective equipment (PPE) during the COVID-19 pandemic, the interest and demand for sterilization devices to reuse PPE has increased. For reuse of face masks, they must be effectively decontaminated of potential infectious agents without compromising its filtration ability during sterilization. In this study, we utilized an atmospheric pressure pulsed dielectric barrier discharge (DBD), combined with nebulized liquid microdroplets to generate plasma-activated mist (PAM). MS2 and T4 bacteriophages were used to conduct the decontamination tests on two types of N95 respirators. Results showed at least a 2-log reduction of MS2 and T4 on N95 respirators treated in one cycle with 7.8% hydrogen peroxide PAM and at least a 3-log reduction treated in 10% hydrogen peroxide PAM. In addition, it was found that there was no significant degradation in filtration efficiency of N95 respirators (3M 1860 and 1804) treated in 10% hydrogen peroxide PAM found after 20 cycles. In terms of re-useability of masks after treatment as determined, it was shown that the elastic straps of 3M 1804 were fragmented after 20 treatment cycles rendering them unusable, while the straps of 3M 1860 were not negatively affected even after 20 disinfection cycles.

Evaluation of the effectiveness of UV-C dose for photoinactivation of SARS-CoV-2 in contaminated N95 respirator, surgical and cotton fabric masks

As part of efforts to combat the Covid-19 pandemic and decrease the high transmissibility of the new coronavirus, SARS-CoV-2, effective inactivation strategies, such as UV-C decontamination technologies, can be reliably disseminated and well-studied. The present study investigated the susceptibility of a high viral load of SARS-CoV-2 in filtering facepiece respirators (FFR) N95, surgical mask, cotton fabric mask and N95 straps under three different doses of UV-C, applying both real-time PCR (qPCR) and plaque formation assays to quantify viral load reduction and virus infectivity, respectively. The results show that more than 95% of the amount of SARS-CoV-2 RNA could be reduced after 10 min of UV-C exposure (0.93 J cm-2 per side) in FFR N95 and surgical masks and, after 5 min of UV-C treatment (0.46 J cm-2 per side) in fabric masks. Furthermore, the analysis of viable coronaviruses after these different UV-C treatments demonstrated that the lowest applied dose is sufficient to decontaminate all masks ([Formula: see text] 3-log10 reduction of the infective viral load, > 99.9% reduction). However, for the elastic strap of N95 respirators, a UV-C dose three times greater than that used in masks (1.4 J cm-2 per side) is required. The findings suggest that the complete decontamination of masks can be performed effectively and safely in well-planned protocols for pandemic crises or as strategies to reduce the high consumption and safe disposal of these materials in the environment.

Decontamination Assessment of Nanofiber-based N95 Masks

As the world battles with the outbreak of the novel coronavirus, it also prepares for future global pandemics that threaten our health, economy, and survivor. During the outbreak, it became evident that use of personal protective equipment (PPE), specially face masks, can significantly slow the otherwise uncontrolled spread of the virus. Nevertheless, the outbreak and its new variants have caused shortage of PPE in many regions of the world. In addition, waste management of the enormous economical and environmental footprint of single use PPE has proven to be a challenge. Therefore, this study advances the theme of decontaminating used masks. More specifically, the effect of various decontamination techniques on the integrity and functionality of nanofiber-based N95 masks (i.e. capable of at least filtering 95% of 0.3 μm aerosols) were examined. These techniques include 70% ethanol, bleaching, boiling, steaming, ironing as well as placement in autoclave, oven, and exposure to microwave (MW) and ultraviolet (UV) light. Herein, filtration efficiency (by Particle Filtration Efficiency equipment), general morphology, and microstructure of nanofibers (by Field Emission Scanning Electron microscopy) prior and after every decontamination technique were observed. The results suggest that decontamination of masks with 70% ethanol can lead to significant unfavorable changes in the microstructure and filtration efficiency (down to 57.33%) of the masks. In other techniques such as bleaching, boiling, steaming, ironing and placement in the oven, filtration efficiency dropped to only about 80% and in addition, some morphological changes in the nanofiber microstructure were seen. Expectedly, there was no significant reduction in filtration efficiency nor microstructural changes in the case of placement in autoclave and exposure to the UV light. It was concluded that, the latter methods are preferable to decontaminate nanofiber-based N95 masks.

Sensitivity of influenza virus to ultraviolet irradiation

BACKGROUND

The measures implemented against the coronavirus pandemic also led to a sharp decline in influenza infections in the 2020/2021 flu season. In the meantime, however, the number of influenza infections has risen again; it is known from history that influenza viruses can also trigger severe pandemics. Therefore, we investigated the efficacy of ultraviolet radiation in the spectral range of 200-400 nm for inactivating influenza viruses.

MATERIALS AND METHODS

The scientific literature was searched for published ultraviolet (UV) irradiation experiments with influenza viruses and the results were standardized by determining the lg-reduction dose. The results were then sorted and analyzed by virus type and wavelength as far as possible.

RESULTS

The scope of the published data sets was limited and revealed large variations with regard to the lg-reduction dose. Only for experiments with influenza viruses in liquid media in the UVC spectral range around 260 nm - the emission range of commonly-used mercury vapor lamps - was there sufficient data to compare virus types. No significant difference between the virus (sub-) types was observed. The lg-reduction dose in this spectral range is 1.75 mJ/cm² (median). It was also shown that influenza viruses are particularly sensitive in the far-UVC spectral range (200-230 nm).

CONCLUSION

UVC, including far-UVC, is suited for influenza virus inactivation as long as the viruses are in UVC-transparent materials. A large difference in the UV sensitivity of different influenza viruses from the last approx. 100 years could not be detected. Thus, it is reasonable to assume that future influenza viruses will also be similarly UV-sensitive or that UV can also inactivate new influenza viruses.

Mask disinfection using atmospheric pressure cold plasma

OBJECTIVES

Mask usage has increased over the last few years due to the COVID-19 pandemic, resulting in a mask shortage. Furthermore, their prolonged use causes skin problems related to bacterial overgrowth. To overcome these problems, atmospheric pressure cold plasma was studied as an alternative technology for mask disinfection.

METHODS

Different microorganisms (Pseudomonas aeruginosa, Escherichia coli, Staphylococcus spp.), different gases (nitrogen, argon, and air), plasma power (90-300 W), and treatment times (45 seconds to 5 minutes) were tested.

RESULTS

The best atmospheric pressure cold plasma treatment was the one generated by nitrogen gas at 300 W and 1.5 minutes. Testing of breathing and filtering performance and microscopic and visual analysis after one and five plasma treatment cycles, highlighted that these treatments did not affect the morphology or functional capacity of the masks.

CONCLUSION

Considering the above, we strongly believe that atmospheric pressure cold plasma could be an inexpensive, eco-friendly, and sustainable mask disinfection technology enabling their reusability and solving mask shortage.

Effect of UV-C germicidal irradiation (UVGI) on the structural integrity of N95 and KN95 respirators

This study focuses on reprocessing a group of filtering facepiece respirators (FFR) using ultraviolet germicidal irradiation (UVGI). The aim is to explore the possibility of disinfecting selected KN95 FFRs, in comparison with the N95 FFRs, and assess their viability for reusage. For this purpose, five models of unused N95 and KN95 FFR models obtained from the hospital were exposed to UV-C light using a customized UVGI chamber. The material integrity of treated FFRs was examined in terms of particle penetration and strap tension. The surface morphology of all models is inspected to determine the visible changes of each FFR upon exposure to 1-100 cycles (1 cycle is equivalent to 1 J/cm² UV dose). The penetration test results indicate that the physical properties of the KN95 and N95 FFRs remain within permissible limits despite being reprocessed by up to 100 cycles (100 J/cm²). Using a microscope, the physical observations also reveal that no visible damage can be seen even after 100 J/cm² exposure. Apart from the filter bodies, the tension of each strap was also found to not be significantly affected by UV radiation by at least 10 disinfection cycles (10 J/cm²). This confirms that KN95, as well as N95 FFRs, can be subjected to UV treatment as a means of disinfection.

Surface Inactivation of Human Coronavirus by MACOMA™ UVA-TiO2 Coupled Photocatalytic Disinfection System

There is an immense healthcare challenge and financial pressure due to the COVID-19 pandemic caused by a newly identified human coronavirus, SARS-CoV-2. Effective COVID-19 prevention efforts in healthcare, home, and community settings highlight the need for rapid, efficient, and no-contact SARS-CoV-2 inactivation strategies. Here, we examined the photocatalytic and virucidal activity of the MACOMA™ TiO2 photocatalytic film activated by an UVA-LED-12V-367 nm (MA-717836-1) lamp against the HCoV-OC43, a member of the beta coronaviruses family, like SARS-CoV-2, using quantitative RT-qPCR and virus infectivity assays. The UVA radiation-responsive TiO2 film accelerated virus inactivation (decreased viral titer) compared to the uncoated glass surface when placed at a vertical distance of 1.2 feet (~14 inches) from virus samples for 10, 30, and 60 min. UVA-LED exposure for both 10 and 30 min effectively reduced the viral RNA copies and the infectious virus in samples on TiO2-coated surfaces compared to the control surfaces. Importantly, a 60 min exposure of samples on the TiO2 completely eliminated HCoV-OC43. These results confirmed that the MACOMA™ UVA/TiO2-based disinfection system provides a rapid and complete surface inactivation of tested human coronavirus in a human-safe manner and has great potential for limiting the virus spread in poorly ventilated as well as high-traffic public places.

Effect of five decontamination methods on face masks and filtering facepiece respirators contaminated with Staphylococcus aureus and Pseudomonas aeruginosa

Introduction. In the context of the global pandemic due to SARS-CoV-2, procurement of personal protective equipment during the crisis was problematic. The idea of reusing and decontaminating personal surgical masks in facilities was explored in order to avoid the accumulation of waste and overcome the lack of equipment.

Hypothesis. Our hypothesis is that this work will show the decontamination methods assessed are effective for bacteria, such as Staphylococcus aureus and Pseudomonas aeruginosa .

Aim. We aim to provide information about the effects of five decontamination procedures (UV treatment, dry heat, vaporized H2O2, ethanol treatment and blue methylene treatment) on S. aureus and P. aeruginosa . These bacteria are the main secondary bacterial pathogens responsible for lung infections in the hospital environment.

Methodology. The surgical masks and the filtering facepiece respirators were inoculated with two bacterial strains ( S. aureus ATCC 29213 and P. aeruginosa S0599) and submitted to five decontamination treatments: vaporized H2O2 (VHP), UV irradiation, dry heat treatment, ethanol bath treatment and blue methylene treatment. Direct and indirect microbiology assessments were performed on three positive controls, five treated masks and one negative control.

Results. The five decontaminations showed significant (P<0.05) but different degrees of reductions of S. aureus and P. aeruginosa . VHP, dry heat treatment and ethanol treatment adequately reduced the initial contamination. The 4 min UV treatment allowed only a reduction to five orders of magnitude for face mask respirators. The methylene blue treatment induced a reduction to two orders of magnitude.

Conclusions. The three methods that showed a log10 reduction factor of 6 were the dry heat method, VHP and ethanol bath treatment. These methods are effective and their establishment in the medical field are easy but require economic investment.

Verifiable Surface Disinfection Using Ultraviolet Light with a Mobile Manipulation Robot

Robots are being increasingly used in the fight against highly-infectious diseases such as the Novel Coronavirus (SARS-CoV-2). By using robots in place of human health care workers in disinfection tasks, we can reduce the exposure of these workers to the virus and, as a result, often dramatically reduce their risk of infection. Since healthcare workers are often disproportionately affected by large-scale infectious disease outbreaks, this risk reduction can profoundly affect our ability to fight these outbreaks. Many robots currently available for disinfection, however, are little more than mobile platforms for ultraviolet lights, do not allow fine-grained control over how the disinfection is performed, and do not allow verification that it was done as the human supervisor intended. In this paper, we present a semi-autonomous system, originally designed for the disinfection of surfaces in the context of Ebola Virus Disease (EVD) that allows a human supervisor to direct an autonomous robot to disinfect contaminated surfaces to a desired level, and to subsequently verify that this disinfection has taken place. We describe the overall system, the user interface, how our calibration and modeling allows for reliable disinfection, and offer directions for future work to address open space disinfection tasks.

Disinfection of Respirators with Ultraviolet Radiation

Data for interpreting virus inactivation on N95 face filtering respirators (FFRs) by ultraviolet (UV) radiation are important in developing UV strategies for N95 FFR disinfection and reuse for any situation, whether it be everyday practices, contingency planning for expected shortages, or crisis planning for known shortages. Data regarding the integrity, form, fit, and function of N95 FFR materials following UV radiation exposure are equally important. This article provides these data for N95 FFRs following UV-C irradiation (200 nm to 280 nm) in a commercial UV-C enclosure. Viral inactivation was determined by examining the inactivation of OC43, a betacoronavirus, inoculated on N95 FFRs. Different metrological approaches were used to examine irradiated N95 FFRs to determine if there were any discernible physical differences between non-irradiated N95 FFRs and those irradiated using the UV-C enclosure. Material integrity was examined using high-resolution scanning electron microscopy. Form, fit, and function were examined using flow resistance, tensile strength, and particle filtration measurements. A separate examination of filter efficiency, fit, and strap tensile stress measurements was performed by the National Personal Protective Technology Laboratory. Data from these metrological examinations provide evidence that N95 FFR disinfection and reuse using the UV-C enclosure can be effective.

Portable Ultraviolet-C Chambers for Inactivation of SARS-CoV-2

The goal of this project was to create and optimize the performance of portable chambers for reliable ultraviolet (UV) disinfection of personal protective equipment (PPE) and enable its safe reuse. During unforeseen times of high demand for PPE, such as during the coronavirus disease 2019 (COVID-19) pandemic, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), single-use PPE supply can be quickly depleted. UV radiation has been shown to disinfect materials with high efficacy. This paper reports the design and construction of two 280 nm ultraviolet-C (UV-C) disinfection chambers in the form of portable chambers with 46 cm × 46 cm × 46 cm interior dimensions, one using light-emitting diodes and the other using mercury vapor lamps. This paper summarizes and presents a review of SARS-CoV-2 UV deactivation research during 2020 to 2021. Additionally, this paper discusses efforts to increase the uniformity and overall intensity of the UV-C radiation within the chambers through the installation of a UV-reflective, porous polytetrafluoroethylene (PTFE) material. A calculator prototype was additionally designed to calculate the reduction of SARS-CoV-2 as a result of UV-C disinfection, and the prototype code is presented. The paper describes the selection of UV-C radiation sources for the chambers and the chambers' mechanical and electrical design, PTFE installation, testing, and safety considerations.

Decontamination of High-Efficiency Mask Filters From Respiratory Pathogens Including SARS-CoV-2 by Non-thermal Plasma

The current pandemic resulted in a rapidly increasing demand for personal protective equipment (PPE) initially leading to severe shortages of these items. Hence, during an unexpected and fast virus spread, the possibility of reusing highly efficient protective equipment could provide a viable solution for keeping both healthcare professionals and the general public equipped and protected. This requires an efficient decontamination technique that preserves functionality of the sensitive materials used for PPE production. Non-thermal plasma (NTP) is a decontamination technique with documented efficiency against select bacterial and fungal pathogens combined with low damage to exposed materials. We have investigated NTP for decontamination of high-efficiency P3 R filters from viral respiratory pathogens in comparison to other commonly used techniques. We show that NTP treatment completely inactivates SARS-CoV-2 and three other common human respiratory viruses including Influenza A, Rhinovirus and Adenovirus, revealing an efficiency comparable to 90°C dry heat or UVC light. Unlike some of the tested techniques (e.g., autoclaving), NTP neither influenced the filtering efficiency nor the microstructure of the filter. We demonstrate that NTP is a powerful and economic technology for efficient decontamination of protective filters and other sensitive materials from different respiratory pathogens.

Rapid design and implementation of a UVC decontamination room

With the recent COVID-19 pandemic that has swept the world and the nation, hospitals around the country have experienced shortages in Personal Protective Equipment, specifically N95 filter face-mask respirators (FFRs). This has created the need for facilities to develop sterilization processes to enable reuse of face masks by the health care personnel. Among the various methods of sterilization, UVC light exposure is the easiest to implement given the factors of time, safety, and availability. Face masks and/or other PPE are exposed to UVC light for a specified time to kill any viruses or bacteria that may reside on the surfaces of the masks. A collaborative effort was formed in April of 2020 between Wellstar Health System and Kennesaw State University to (1) setup an appropriate sterilization room at a Wellstar hospital (2) develop the procedural guidelines necessary to ensure quality control and (3) assess employees’ perceptions of the N95 FFR decontamination process and efficacy. This paper will first describe the methodology used to validate the layout of the room, which consists of a rudimentary analytical analysis of the UVC photon intensity from bulb-to-mask, computer simulations to determine the lighting power density throughout the room, and experimental measurements to confirm the appropriate energy deposition. This paper will then document the procedures for handling and processing the pre- and post-sterilized masks followed by employee survey findings. It is the hope of the authors that this paper will serve to provide a generic blueprint for hospitals and other organizations to follow if a future need arises for rapid UVC decontamination.

Fabrication and working of portable PPE kit sterilizer using UV Ozone Sanitization process

Personnel protective equipment, N95 masks, and filtering facepiece respirators such as goggles, face shields, played a very important rolein the safety of bothvirus-affected persons and as well as medical staff, health workers. As the coronavirus (Covid-19) was increasing exponentially worldwide, healthcare has been the demand for this basic equipment especiallyface protection shields have critical issues. There has been an effort to find out the different ways to conserve PPE kits, to use after the sterilization process. The current work focused onthe fabrication of the Portable PPE Kit Sterilizer model using UV Ozone Sanitization Processto utilize for recycling of N95 masks, goggles. Due to its miniature structure, can be used in public health sectors like the hospital, research centers, schools, and laboratories also. The method adopted was cheap, reuse, well suited for mass sanitization.

Ultraviolet-C Irradiation, Heat, and Storage as Potential Methods of Inactivating SARS-CoV-2 and Bacterial Pathogens on Filtering Facepiece Respirators

The arrival of SARS-CoV-2 to Aotearoa/New Zealand in February 2020 triggered a massive response at multiple levels. Procurement and sustainability of medical supplies to hospitals and clinics during the then upcoming COVID-19 pandemic was one of the top priorities. Continuing access to new personal protective equipment (PPE) was not guaranteed; thus, disinfecting and reusing PPE was considered as a potential alternative. Here, we describe part of a local program intended to test and implement a system to disinfect PPE for potential reuse in New Zealand. We used filtering facepiece respirator (FFR) coupons inoculated with SARS-CoV-2 or clinically relevant multidrug-resistant pathogens (Acinetobacter baumannii Ab5075, methicillin-resistant Staphylococcus aureus USA300 LAC and cystic-fibrosis isolate Pseudomonas aeruginosa LESB58), to evaluate the potential use of ultraviolet-C germicidal irradiation (UV-C) or dry heat treatment to disinfect PPE. An applied UV-C dose of 1000 mJ/cm2 was sufficient to completely inactivate high doses of SARS-CoV-2; however, irregularities in the FFR coupons hindered the efficacy of UV-C to fully inactivate the virus, even at higher UV-C doses (2000 mJ/cm2). Conversely, incubating contaminated FFR coupons at 65 °C for 30 min or 70 °C for 15 min, was sufficient to block SARS-CoV-2 replication, even in the presence of mucin or a soil load (mimicking salivary or respiratory secretions, respectively). Dry heat (90 min at 75 °C to 80 °C) effectively killed 106 planktonic bacteria; however, even extending the incubation time up to two hours at 80 °C did not completely kill bacteria when grown in colony biofilms. Importantly, we also showed that FFR material can harbor replication-competent SARS-CoV-2 for up to 35 days at room temperature in the presence of a soil load. We are currently using these findings to optimize and establish a robust process for decontaminating, reusing, and reducing wastage of PPE in New Zealand.

Rationale and process for N95 respirator sanitation and reuse in the coronavirus disease 2019 (COVID-19) pandemic

OBJECTIVE

The novel severe acute respiratory coronavirus virus 2 (SARS-CoV-2) was first reported in Wuhan, China, in December 2019 and is notable for being highly contagious and potentially lethal; and SARS-CoV-2 is mainly spread by droplet transmission. The US healthcare system's response to the COVID-19 pandemic has been challenged by a shortage of personal protective equipment (PPE), especially N95 respirators. Restricted use, reuse, and sanitation of PPE have been widely adopted to provide protection for frontline healthcare workers caring for often critically ill and highly contagious patients. Here, we describe our validated process for N95 respirator sanitation.

DESIGN

Process development, validation, and implementation.

SETTING

Level 1, urban, academic, medical center.

METHODS

A multidisciplinary team developed a novel evidence-based process for N95 respirator reprocessing and sanitation using ultraviolet (UV) light. Dose measurement, structural integrity, moisture content, particle filtration, fit testing, and environmental testing were performed for both quality control and validation of the process.

RESULTS

The process achieved UV light dosing for sanitation while maintaining the functional and structural integrity of the N95 respirators, with a daily potential throughput capacity of ∼12,000 masks. This process has supported our health system to provide respiratory PPE to all frontline team members.

CONCLUSIONS

This novel method of N95 respirator sanitation can safely enable reuse of the N95 respirators essential for healthcare workers caring for patients with COVID-19. Our high-throughput process can extend local supplies of this critical PPE until the national supply is replenished.

Hydrogen peroxide vapor decontamination of N95 respirators for reuse

OBJECTIVE

The coronavirus disease 2019 (COVID-19) pandemic has led to global shortages of N95 respirators. Reprocessing of used N95 respirators may provide a higher filtration crisis alternative, but whether effective sterilization can be achieved for a virus without impairing respirator function remains unknown. We evaluated the viricidal efficacy of Bioquell vaporized hydrogen peroxide (VHP) on contaminated N95 respirators and tested the particulate particle penetration and inhalation and exhalation resistance of respirators after multiple cycles of VHP.

METHODS

For this study, 3M 1870 N95 respirators were contaminated with 3 aerosolized bacteriophages: T1, T7, and Pseudomonas phage phi-6 followed by 1 cycle of VHP decontamination using a BQ-50 system. Additionally, new and unused respirators were sent to an independent laboratory for particulate filter penetration testing and inhalation and exhalation resistance after 3 and 5 cycles of VHP.

RESULTS

A single VHP cycle resulted in complete eradication of bacteriophage from respirators (limit of detection 10 PFU). Respirators showed acceptable limits for inhalation/exhalation resistance after 3 and 5 cycles of VHP. Respirators demonstrated a filtration efficiency >99 % after 3 cycles, but filtration efficiency fell below 95% after 5 cycles of HPV.

CONCLUSION

Bioquell VHP demonstrated high viricidal activity for N95 respirators inoculated with aerosolized bacteriophages. Bioquell technology can be scaled for simultaneous decontamination of a large number of used but otherwise intact respirators. Reprocessing should be limited to 3 cycles due to concerns both about impact of clinical wear and tear on fit, and to decrement in filtration after 3 cycles.

Safe and effective re-use policy for high-efficiency filtering facepiece respirators (FFRS): Experience of one hospital during the Covid-19 pandemic in 2020

The high transmissibility rate of the Severe Acute Respiratory Syndrome Coronavirus 2 facilitated an exponential growth in the number of infections, posing a tremendous threat to healthcare systems across the world. The use of Non-oil 95% efficiency (N95) respirators demonstrated to reduce the risk of virus transmission. The escalated demand in N95 respirators during 2020 generated a massive shortage worldwide which resulted in serious implications, one being an increase in healthcare providers' costs. In response, various optimization strategies were implemented. This study aimed to assess the implementation of a safe and effective re-use policy for high-efficiency filtering facepiece respirators (FFRs) in a high-complexity university hospital in 2020. Associated costs were estimated through a descriptive accounting analysis of resources saved. Acceptability, appropriateness, and feasibility rates were 80.5%, 78.8%, and 83.6%, respectively. With an implementation cost of approximately 10,000 USD, there was a 56.1% reduction in FFRs consumption, compared with a non-policy scenario, with savings exceeding 500,000 USD in 2020. In a pandemic scenario where it is vital to spare resources, a FFRs rational use policy demonstrated to be a highly cost-efficient alternative in order to save resources without increasing contagion risk among healthcare workers.

Masks for COVID-19

Sustainable solutions on fabricating and using a face mask to block the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spread during this coronavirus pandemic of 2019 (COVID-19) are required as society is directed by the World Health Organization (WHO) toward wearing it, resulting in an increasingly huge demand with over 4 000 000 000 masks used per day globally. Herein, various new mask technologies and advanced materials are reviewed to deal with critical shortages, cross-infection, and secondary transmission risk of masks. A number of countries have used cloth masks and 3D-printed masks as substitutes, whose filtration efficiencies can be improved by using nanofibers or mixing other polymers into them. Since 2020, researchers continue to improve the performance of masks by adding various functionalities, for example using metal nanoparticles and herbal extracts to inactivate pathogens, using graphene to make masks photothermal and superhydrophobic, and using triboelectric nanogenerator (TENG) to prolong mask lifetime. The recent advances in material technology have led to the development of antimicrobial coatings, which are introduced in this review. When incorporated into masks, these advanced materials and technologies can aid in the prevention of secondary transmission of the virus.

Hydrogen peroxide vapor decontamination of N95 respirators for reuse

OBJECTIVE

The coronavirus disease 2019 (COVID-19) pandemic has led to global shortages of N95 respirators. Reprocessing of used N95 respirators may provide a higher filtration crisis alternative, but whether effective sterilization can be achieved for a virus without impairing respirator function remains unknown. We evaluated the viricidal efficacy of Bioquell vaporized hydrogen peroxide (VHP) on contaminated N95 respirators and tested the particulate particle penetration and inhalation and exhalation resistance of respirators after multiple cycles of VHP.

METHODS

For this study, 3M 1870 N95 respirators were contaminated with 3 aerosolized bacteriophages: T1, T7, and Pseudomonas phage phi-6 followed by 1 cycle of VHP decontamination using a BQ-50 system. Additionally, new and unused respirators were sent to an independent laboratory for particulate filter penetration testing and inhalation and exhalation resistance after 3 and 5 cycles of VHP.

RESULTS

A single VHP cycle resulted in complete eradication of bacteriophage from respirators (limit of detection 10 PFU). Respirators showed acceptable limits for inhalation/exhalation resistance after 3 and 5 cycles of VHP. Respirators demonstrated a filtration efficiency >99 % after 3 cycles, but filtration efficiency fell below 95% after 5 cycles of HPV.

CONCLUSION

Bioquell VHP demonstrated high viricidal activity for N95 respirators inoculated with aerosolized bacteriophages. Bioquell technology can be scaled for simultaneous decontamination of a large number of used but otherwise intact respirators. Reprocessing should be limited to 3 cycles due to concerns both about impact of clinical wear and tear on fit, and to decrement in filtration after 3 cycles.

Conceptualizing a novel Hybrid Decontamination System (HDS) based on UV/H2O2 treatment for the enhanced decontamination and reuse of N95 FFRs

The ongoing Pandemic of COVID-19 caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has severely stressed the worldwide healthcare system and has created dangerous shortages of personal protective equipment (PPE) including N95 filtering facepiece respirators (FFRs). Even though suppliers struggled to meet global demand for N95 masks at an unprecedented level, a shortage of FFR appears as a significant factor in the transmission of the disease to frontline workers. CDC, USA has mentioned that FFR decontamination and reuse may be necessary during times of shortage to ensure guaranteed availability. Hence present stressed condition faced by the healthcare sector seeks for an affordable decontamination strategy that can be replicated easily broadening the utility of FFR decontamination across a range of healthcare settings. After reviewing available literature on the various disinfection techniques that may be used for the decontamination of FFRs, a first of its kind, portable Hybrid Decontamination System/procedure has been conceptualized and designed. This system combines the disinfecting properties of both vaporous hydrogen peroxide (VHP) and ultra-violet C irradiation (UV C) to ensure maximum decontamination of N95 respirators. The instrument will be equipped with a hydrogen peroxide chamber and UV light source. Sterilization of the FFRs will be done through treatment with VHP followed by UV light treatment. The proposed system will allow the user to completely sterilize the FFRs in a time-efficient manner.

What We Are Learning from COVID-19 for Respiratory Protection: Contemporary and Emerging Issues

Infectious respiratory diseases such as the current COVID-19 have caused public health crises and interfered with social activity. Given the complexity of these novel infectious diseases, their dynamic nature, along with rapid changes in social and occupational environments, technology, and means of interpersonal interaction, respiratory protective devices (RPDs) play a crucial role in controlling infection, particularly for viruses like SARS-CoV-2 that have a high transmission rate, strong viability, multiple infection routes and mechanisms, and emerging new variants that could reduce the efficacy of existing vaccines. Evidence of asymptomatic and pre-symptomatic transmissions further highlights the importance of a universal adoption of RPDs. RPDs have substantially improved over the past 100 years due to advances in technology, materials, and medical knowledge. However, several issues still need to be addressed such as engineering performance, comfort, testing standards, compliance monitoring, and regulations, especially considering the recent emergence of pathogens with novel transmission characteristics. In this review, we summarize existing knowledge and understanding on respiratory infectious diseases and their protection, discuss the emerging issues that influence the resulting protective and comfort performance of the RPDs, and provide insights in the identified knowledge gaps and future directions with diverse perspectives.

Factors affecting decontamination of N95 masks for reuse: Feasibility & practicality of various methods

The SARS-CoV-2 pandemic has led to an enormous increase in cases worldwide in a short time. The potential shortage might call for the reuse of personal protective equipment especially N95 masks. In this review, the methods available for decontamination of N95 masks have been compared to highlight the advantages and efficacies of different methods. Studies conducted to evaluate the biocidal efficacy, effect on filtration efficacy of the decontamination method, and maintenance of structural integrity of masks, were reviewed. Ultraviolet germicidal irradiation (UVGI) and hydrogen peroxide (H2O2) vapour were the most commonly evaluated interventions and showed good germicidal activity without significant deleterious effects on mask performance. Vapourous H2O2 was the best method as it maintained NIOSH (The National Institute for Occupational Safety and Health) recommendations of the mask on re-use and additionally, one mask could be decontaminated and reused 30 times. Ethylene oxide (EtO) preserved the maximum filtration efficacy and flow resistance. Chemical and heat-based methods had the advantages of being cost-effective and feasible but affected the structural integrity and fit of the masks. For the decontamination of N95 masks, among the heat-based methods steam was found to be the best for low middle-income countries setting. H2O2-based methods, UVGI, and EtO all exhibited both adequate biocidal efficacies and functionality (fit testing and structural integrity). Further studies on logistics, healthcare worker acceptability of reuse, and actual efficacy of protection against SARS-CoV-2 infection should be carried out to validate the use of decontamination in the real-life settings.

Exploring Reusability of Disposable Face Masks: Effects of Disinfection Methods on Filtration Efficiency, Breathability, and Fluid Resistance

To curb the spread of the COVID-19 virus, the use of face masks such as disposable surgical masks and N95 respirators is being encouraged and even enforced in some countries. The widespread use of masks has resulted in global shortages and individuals are reusing them. This calls for proper disinfection of the masks while retaining their protective capability. In this study, the killing efficiency of ultraviolet-C (UV-C) irradiation, dry heat, and steam sterilization against bacteria (Staphylococcus aureus), fungi (Candida albicans), and nonpathogenic virus (Salmonella virus P22) is investigated. UV-C irradiation for 10 min in a commercial UV sterilizer effectively disinfects surgical masks. N95 respirators require dry heat at 100 °C for hours while steam treatment works within 5 min. To address the question on safe reuse of the disinfected masks, their bacteria filtration efficiency, particle filtration efficiency, breathability, and fluid resistance are assessed. These performance factors are unaffected after 5 cycles of steam (10 min per cycle) and 10 cycles of dry heat at 100 °C (40 min per cycle) for N95 respirators, and 10 cycles of UV-C irradiation for surgical masks (10 min per side per cycle). These findings provide insights into formulating the standard procedures for reusing masks without compromising their protective ability.

Reusing and/or reprocessing the N95 face respirator mask or equivalent: An integrative review

OBJECTIVE

to analyze the scientific evidence available on the different reprocessing methods and the necessary conditions for reuse of the N95 face respirator mask or equivalent.

METHOD

an integrative literature review. The PICO strategy was used to elaborate the question. The search was conducted in four databases: PubMed, SciVerse Scopus, WebofScience and EMBASE, considering any period of time.

RESULTS

a total of 32 studies were included from the 561 studies identified, and they were presented in two categories: "Conditions for reuse" and "Reprocessing the masks". Of the evaluated research studies, seven(21.8%) addressed the reuse of the N95 face respirator mask or equivalent and 25(78.1%) evaluated different reprocessing methods, namely: ultraviolet germicidal irradiation(14); hydrogen peroxide(8); vapor methods(14); using dry heat(5) and chemical methods(sodium hypochlorite[6], ethanol[4] and sodium chloride with sodium bicarbonate and dimethyldioxirane[1]). We emphasize that different methods were used in one same article.

CONCLUSION

no evidence was found to support safe reprocessing of face respirator masks. In addition, reuse is contraindicated due to the risk of self-contamination and inadequate sealing.

Best Practices for Germicidal Ultraviolet-C Dose Measurement for N95 Respirator Decontamination

Ultraviolet-C (UV-C) decontamination holds promise in combating the coronavirus disease 2019 pandemic, particularly with its potential to mitigate the N95 respirator shortage. Safe, effective, and reproducible decontamination depends critically on UV-C dose, yet dose is frequently measured and reported incorrectly, which results in misleading and potentially harmful protocols. Understanding best practices in UV-C dose measurement for N95 respirator decontamination is essential to the safety of medical professionals, researchers, and the public. Here, we outline the fundamental optical principles governing UV-C irradiation and detection, as well as the key metrics of UV-C wavelength and dose. In particular, we discuss the technical and regulatory distinctions between UV-C N95 respirator decontamination and other applications of germicidal UV-C, and we highlight the unique considerations required for UV-C N95 respirator decontamination. Together, this discussion will inform best practices for UV-C dose measurement for N95 respirator decontamination during crisis-capacity conditions.

UVC-based photoinactivation as an efficient tool to control the transmission of coronaviruses

The ongoing COVID-19 pandemic made us re-realize the importance of environmental disinfection and sanitation in indoor areas, hospitals, and clinical rooms. UVC irradiation of high energy and short wavelengths, especially in the 200-290-nm range possesses the great potential for germicidal disinfection. These properties of UVC allow to damage or destruct the nucleic acids (DNA/RNA) in diverse microbes (e.g., bacteria, fungi, and viruses). UVC light can hence be used as a promising tool for prevention and control of their infection or transmission. The present review offers insights into the historical perspective, mode of action, and recent advancements in the application of UVC-based antiviral therapy against coronaviruses (including SARS CoV-2). Moreover, the application of UVC lights in the sanitization of healthcare units, public places, medical instruments, respirators, and personal protective equipment (PPE) is also discussed. This article, therefore, is expected to deliver a new path for the developments of UVC-based viricidal approach.

Impact of ultraviolet germicidal irradiation on new silicone half-piece elastometric respirator (VJR-NMU) performance, structural integrity and sterility during the COVID-19 pandemic

Since the innovation of our new half-piece elastometric respirator, this type of filtering facepiece respirator (FFR) has been used widely in Thailand. Decontamination methods including ultraviolet C (UVC) germicidal irradiation and 70% alcohol have been implemented to decontaminate these respirators. We then examined the inactivation potential of different decontamination processes on porcine epidemic diarrhea virus (PEDV) and numerous bacterial strains, most of which were skin-derived. To enable rigorous integrity of the masks after repeated decontamination processes, fit tests by the Bitrex test, tensile strength and elongation at break were also evaluated. Our results showed that UVC irradiation at a dose of 3 J/cm2 can eradicate bacteria after 60 min and viruses after 10 min. No fungi were found on the mask surface before decontamination. The good fit test results, tensile strength and elongation at break were still maintained after multiple cycles of decontamination. No evidence of physical degradation was found by gross visual inspection. Alcohol (70%) is also an easy and effective way to eradicate microorganisms on respirators. As the current pandemic is expected to continue for months to years, the need to supply adequate reserves of personnel protective equipment (PPE) and develop effective PPE reprocessing methods is crucial. Our studies demonstrated that the novel silicone mask can be safely reprocessed and decontaminated for many cycles by UVC irradiation, which will help ameliorate the shortage of important protective devices in the COVID-19 pandemic era.

Mapping of UV-C dose and SARS-CoV-2 viral inactivation across N95 respirators during decontamination

During public health crises like the COVID-19 pandemic, ultraviolet-C (UV-C) decontamination of N95 respirators for emergency reuse has been implemented to mitigate shortages. Pathogen photoinactivation efficacy depends critically on UV-C dose, which is distance- and angle-dependent and thus varies substantially across N95 surfaces within a decontamination system. Due to nonuniform and system-dependent UV-C dose distributions, characterizing UV-C dose and resulting pathogen inactivation with sufficient spatial resolution on-N95 is key to designing and validating UV-C decontamination protocols. However, robust quantification of UV-C dose across N95 facepieces presents challenges, as few UV-C measurement tools have sufficient (1) small, flexible form factor, and (2) angular response. To address this gap, we combine optical modeling and quantitative photochromic indicator (PCI) dosimetry with viral inactivation assays to generate high-resolution maps of "on-N95" UV-C dose and concomitant SARS-CoV-2 viral inactivation across N95 facepieces within a commercial decontamination chamber. Using modeling to rapidly identify on-N95 locations of interest, in-situ measurements report a 17.4 ± 5.0-fold dose difference across N95 facepieces in the chamber, yielding 2.9 ± 0.2-log variation in SARS-CoV-2 inactivation. UV-C dose at several on-N95 locations was lower than the lowest-dose locations on the chamber floor, highlighting the importance of on-N95 dose validation. Overall, we integrate optical simulation with in-situ PCI dosimetry to relate UV-C dose and viral inactivation at specific on-N95 locations, establishing a versatile approach to characterize UV-C photoinactivation of pathogens contaminating complex substrates such as N95s.

Practical considerations for Ultraviolet-C radiation mediated decontamination of N95 respirator against SARS-CoV-2 virus

Decontaminating N95 respirators for reuse could mitigate shortages during the COVID-19 pandemic. Although the United States Center for Disease Control has identified Ultraviolet-C irradiation as one of the most promising methods for N95 decontamination, very few studies have evaluated the efficacy of Ultraviolet-C for SARS-CoV-2 inactivation. In addition, most decontamination studies are performed using mask coupons that do not recapitulate the complexity of whole masks. We sought to directly evaluate the efficacy of Ultraviolet-C mediated inactivation of SARS-CoV-2 on N95 respirators. To that end we created a portable UV-C light-emitting diode disinfection chamber and tested decontamination of SARS-CoV-2 at different sites on two models of N95 respirator. We found that decontamination efficacy depends on mask model, material and location of the contamination on the mask. Our results emphasize the need for caution when interpreting efficacy data of UV-C decontamination methods.

[Limited Reuse and Extended Use of Filtering Facepiece Respirators]

Objetivo

Los equipos de protección individual (EPI), y dentro de ellos las mascarillas, son fundamentales en una pandemia como la del COVID-19, que ha requerido, en muchas ocasiones, de reutilización de material debido a su escasez. El objetivo de esta revisión es sintetizar la evidencia disponible sobre la reutilización y uso extendido de las mascarillas de media y alta filtración.

Método

Revisión exploratoria. Búsqueda a través de lenguaje natural en PubMed y Centros, Agencias y Organizaciones para el Control de Enfermedades. Se limitó a artículos publicados entre 2010-2020 en inglés y en español.

Resultados

Se localizaron 83 artículos, seleccionándose 14, más cinco recomendaciones. Los temas abordados se clasifican en siete apartados: Caducidad, uso extendido y reutilización de mascarillas, técnica de manipulación, sellado, efectos físicos psicológicos y cumplimentación, contaminación y descontaminación de mascarillas.

Conclusiones

La reutilización de las mascarillas no está recomendada por los organismos oficiales ni los fabricantes, sólo se acepta en casos extraordinarios, como las pandemias. Los estudios se caracterizan por contar con muestras pequeñas, usan diferentes modelos de mascarillas ajustando su recomendación al modelo.

Decontaminating N95/FFP2 masks for reuse during the COVID-19 epidemic: a systematic review

BACKGROUND

With the current COVID-19 pandemic, many healthcare facilities have been lacking a steady supply of filtering facepiece respirators. To better address this challenge, the decontamination and reuse of these respirators is a strategy that has been studied by an increasing number of institutions during the COVID-19 pandemic.

METHODS

We conducted a systematic literature review in PubMed, PubMed Central, Embase, and Google Scholar. Studies were eligible when (electronically or in print) up to 17 June 2020, and published in English, French, German, or Spanish. The primary outcome was reduction of test viruses or test bacteria by log3 for disinfection and log6 for sterilization. Secondary outcome was physical integrity (fit/filtration/degradation) of the respirators after reprocessing. Materials from the grey literature, including an unpublished study were added to the findings.

FINDINGS

Of 938 retrieved studies, 35 studies were included in the analysis with 70 individual tests conducted. 17 methods of decontamination were found, included the use of liquids (detergent, benzalkonium chloride, hypochlorite, or ethanol), gases (hydrogen peroxide, ozone, peracetic acid or ethylene oxide), heat (either moist with or without pressure or dry heat), or ultra violet radiation (UVA and UVGI); either alone or in combination. Ethylene oxide, gaseous hydrogen peroxide (with or without peracetic acid), peracetic acid dry fogging system, microwave-generated moist heat, and steam seem to be the most promising methods on decontamination efficacy, physical integrity and filtration capacity.

INTERPRETATION

A number of methods can be used for N95/FFP2 mask reprocessing in case of shortage, helping to keep healthcare workers and patients safe. However, the selection of disinfection or sterilization methods must take into account local availability and turnover capacity as well as the manufacturer; meaning that some methods work better on specific models from specific manufacturers.

SYSTEMATIC REGISTRATION NUMBER

CRD42020193309.

Reusing Face Covering Masks: Probing the Impact of Heat Treatment

The COVID-19 pandemic resulted in imminent shortages of personal protective equipment such as face masks. To address the shortage, new sterilization or decontamination procedures for masks are quickly being developed and employed. Dry heat and steam sterilization processes are easily scalable and allow treatment of large sample sizes, thus potentially presenting fast and efficient decontamination routes, which could significantly ease the rapidly increasing need for protective masks globally during a pandemic like COVID-19. In this study, a suite of structural and chemical characterization techniques, including scanning electron microscopy (SEM), contact angle, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman were utilized to probe the heat treatment impact on commercially available 3M 8210 N95 Particulate Respirator and VWR Advanced Protection surgical mask. Unique to this study is the use of the synchrotron-based In situ and Operando Soft X-ray Spectroscopy (IOS) beamline (23-ID-2) housed at the National Synchrotron Light Source II at Brookhaven National Laboratory for near-edge X-ray absorption spectroscopy (NEXAFS).

Reusing Face Covering Masks: Probing the Impact of Heat Treatment

The COVID-19 pandemic resulted in imminent shortages of personal protective equipment such as face masks. To address the shortage, new sterilization or decontamination procedures for masks are quickly being developed and employed. Dry heat and steam sterilization processes are easily scalable and allow treatment of large sample sizes, thus potentially presenting fast and efficient decontamination routes, which could significantly ease the rapidly increasing need for protective masks globally during a pandemic like COVID-19. In this study, a suite of structural and chemical characterization techniques, including scanning electron microscopy (SEM), contact angle, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman were utilized to probe the heat treatment impact on commercially available 3M 8210 N95 Particulate Respirator and VWR Advanced Protection surgical mask. Unique to this study is the use of the synchrotron-based In situ and Operando Soft X-ray Spectroscopy (IOS) beamline (23-ID-2) housed at the National Synchrotron Light Source II at Brookhaven National Laboratory for near-edge X-ray absorption spectroscopy (NEXAFS).

Development and validation of technologies suitable for the decontamination and re-use of contaminated N95 filtering facepiece respirators in response to the COVID-19 pandemic

Background

Coronavirus disease 2019 (COVID-19) has brought significant challenges to society globally, particularly in the area of healthcare provision. A pressing need existed in protecting those tasked with delivering healthcare solutions during the COVID-19 crisis by providing solutions for preserving adequate supplies of effective personal protective equipment (PPE).

Aim

To evaluate and validate available methods for the decontamination of N95 filtering facepiece respirators (FFRs) while maintaining functionality during re-use.

Methods

Multiple low-temperature steam and vaporized hydrogen peroxide (VHP) technologies were assessed for inactivation of Mycobacterium spp. and feline calicivirus (employed as representatives of the contamination challenge).

Findings

Virus (≥3log₁₀) and Mycobacterium spp. (≥6log₁₀) inactivation was achieved on various types of N95 FFRs using an array of heat (65–71^oC), humidity (>50% relative humidity) and VHP without affecting the performance of the PPE.

Conclusion

The methods have been validated and were authorized by the US Food and Drug Administration under a temporary emergency use authorization. Based on the findings, opportunities exist for development and deployment of decontamination methods made from simple, general purpose materials and equipment should a future need arise.

Modeling the efficiency of UV at 254 nm for disinfecting the different layers within N95 respirators

The study presented a Monte Carlo simulation of light transport in eight commonly used filtered facepiece respirators (FFRs) to assess the efficacy of UV at 254 nm for the inactivation of SARS-CoV-2. The results showed different fluence rates across the thickness of the eight different FFRs, implying that some FFR models may be more treatable than others, with the following order being (from most to least treatable): models 1512, 9105s, 1805, 9210, 1870+, 8210, 8110s and 1860, for single side illumination. The model predictions did not coincide well with some previously reported experimental data on virus inactivation when applied to FFR surfaces. The simulations predicted that FFRs should experience higher log reductions (>>6-log) than those observed experimentally (often limited to ~5-log). Possible explanations are virus shielding by aggregation or soiling, and a lack of the Monte Carlo simulations considering near-field scattering effects that can create small, localized regions of low UV photon probability on the surface of the fiber material. If the latter is the main cause in limiting practical UV viral decontamination, improvement might be achieved by exposing the FFR to UV isotropically from all directions, such as by varying the UV source to the FFR surface angle during treatment.

Optical Attenuators Extend Dynamic Range but Alter Angular Response of Planar Ultraviolet-C Dosimeters

Effective ultraviolet-C (UV-C) decontamination protocols of N95 respirators require validation that the entire N95 surface receives sufficient dose. Photochromic indicators (PCIs) can accurately measure UV-C dose on nonplanar surfaces, but often saturate below doses required to decontaminate porous, multilayered textiles like N95s. Here, we investigate the use of optical attenuators to extend PCI dynamic range while maintaining a near-ideal angular response-critical for accurate measurements of uncollimated UV-C. We show analytically that tuning attenuator refractive index, attenuation coefficient, and thickness can extend dynamic range, but compromises angular response unless the attenuator is an ideal diffuser. To investigate this tradeoff empirically, we stack PCIs behind model specular (floated borosilicate) and diffuse (polytetrafluoroethylene) attenuators, characterize the angular response, and evaluate on-N95 UV-C measurement accuracy within a decontamination system. Both attenuators increase PCI dynamic range >4×, but simultaneously introduce angle-dependent transmittance, which causes location-dependent underestimation of UV-C dose. PCI-borosilicate and PCI-polytetrafluoroethylene stacks underreport true on-N95 dose by (1) 14.7% and 3.6%, respectively, when near-normal to the source lamp array, and (2) 40.8% and 19.8%, respectively, in a steeply sloped location. Overall, we demonstrate that while planar attenuators can increase PCI dynamic range, verifying near-ideal angular response is critical for accurate UV-C measurements.

The value of photomedicine in a global health crisis: Utilizing ultraviolet C to decontaminate N95 respirators during the COVID-19 pandemic

One early problem during the height of the COVID‐19 global pandemic, caused by severe acute respiratory syndrome 2 (SARS‐CoV‐2), was the shortage of personal protective equipment donned by healthcare workers, particularly N95 respirators. Given the known virucidal, bactericidal, and fungicidal properties of ultraviolet irradiation, in particular ultraviolet C (UVC) radiation, our photomedicine and photobiology unit explored the role of ultraviolet germicidal irradiation (UVGI) using UVC in effectively decontaminating N95 respirators. The review highlights the important role of photobiology and photomedicine in this pandemic. Namely, the goals of this review were to highlight: UVGI as a method of respirator disinfection—specifically against SARS‐CoV‐2, adverse reactions to UVC and precautions to protect against exposure, other methods of decontamination of respirators, and the importance of respirator fit testing.