Enhanced transdermal delivery of meloxicam by nanocrystals: Preparation, in vitro and in vivo evaluation

A quality by design framework for developing nanocrystal bioenabling formulations

The present study aims to outline a rational framework for the design and development of a 1.0% (w/v) hydrocortisone nanocrystal-based formulation, resorting to a simple, efficient, and scalable nanonization methodology, based on the high-pressure homogenization (HPH) technique. Accordingly, the innovative product was comprehensively optimized following a Quality by Design (QbD) approach. The thorough selection of formulation composition was driven by a dual purpose: improving skin permeation and stability. In the early stage of development, a Failure Mode, Effects and Criticality Analysis (FMECA) diagram was employed to identify the most impactful variables for the critical quality attributes (CQAs). In this sense, a rotatable, three-factor and five-level circumscribed central composite design (CCCD) was applied to investigate how squalene concentration (x1), soluplus concentration (x2) and HPH-time (x3) influence physicochemical properties, performance and physical stability of the formulation. A robust Design Space (DS) was defined, establishing the optimal settings for the critical variables, whose combination meets the requirements set in the quality target product profile (QTPP). Morphological analysis revealed the cuboidal shape of hydrocortisone nanocrystals. In what concerns colloidal properties, the most promising formulation disclosed a small particle size (Dx(50) = 311.8 ± 1.5 nm), along with narrow size distribution (span value = 1.91 ± 0.17). Zeta potential results (-2.19 ± 0.15 mV--12.1 ± 0.4 mV) suggested a steric hindrance stabilization. FTIR spectra showed no chemical interactions between drug and formulation components. XRD diffractograms confirmed loss of crystallinity during the downsizing process. In vitro studies revealed an improvement on drug release rate (316 ± 21-516 ± 35 μg/cm2/√t), compared to the coarse suspension and commercial products, and a straight dependence on the stabilizer concentration and HPH time. The permeation flux across the skin (0.16 ± 0.02-1.2 ± 0.5 μg/cm2/h) appeared to be dependent on the drug physicochemical properties, in particular saturation solubility. Further characterization of the experimental formulations pointed out the role of the stabilizing component to prevent against physical instability phenomena. This organic solvent-free, and therefore "green" nanocrystal production technology offers great potential for pharmaceutical R&D and drug delivery by enabling the development of new forms of conventional drugs with optimal physicochemical properties and performance.

Bibliometric analysis and visualization of transdermal drug delivery research in the last decade: global research trends and hotspots

Background: Transdermal delivery has become a crucial field in pharmaceutical research. There has been a proliferation of innovative methods for transdermal drug delivery. In recent years, the number of publications regarding transdermal drug delivery has been rising rapidly. To investigate the current research trends and hotspots in transdermal drug delivery, a comprehensive bibliometric analysis was performed. Methods: An extensive literature review was conducted to gather information on transdermal drug delivery that had been published between 2003 and 2022. The articles were obtained from the Web of Science (WOS) and the National Center for Biotechnology Information (NCBI) databases. Subsequently, the collected data underwent analysis and visualization using a variety of software tools. This approach enables a deeper exploration of the hotspots and emerging trends within this particular research domain. Results: The results showed that the number of articles published on transdermal delivery has increased steadily over the years, with a total of 2,555 articles being analyzed. The most frequently cited articles were related to the optimization of drug delivery and the use of nanotechnology in transdermal drug delivery. The most active countries in the field of transdermal delivery research were the China, United States, and India. Furthermore, the hotspots over the past 2 decades were identified (e.g., drug therapy, drug delivery, and pharmaceutical preparations and drug design). The shift in research focus reflects an increasing emphasis on drug delivery and control release, rather than simply absorption and penetration, and suggests a growing interest in engineering approaches to transdermal drug delivery. Conclusion: This study provided a comprehensive overview of transdermal delivery research. The research indicated that transdermal delivery would be a rapidly evolving field with many opportunities for future research and development. Moreover, this bibliometric analysis will help researchers gain insights into transdermal drug delivery research's hotspots and trends accurately and quickly.

Nanocrystals in cosmetics and cosmeceuticals by topical delivery

The main issues with local delivery of cosmetics are their high sensitivity and limited drug loading of active pharmaceutical ingredient. Nanocrystal technology offers consumers cutting-edge and effective products and exhibits enormous development potential in the beauty business as a new delivery method to address the issue of low solubility and low permeability of sensitive chemicals. In this review, we described the processes for making NCs, along with the impacts of loading and the uses of different carriers. Among them, nanocrystalline loaded gel and emulsion are widely used and may further improve the stability of the system. Then, we introduced the beauty efficacy of drug NCs from five aspects: anti-inflammation and acne, anti-bacterial, lightening and freckle removal, anti-aging as well as UV protection. Following that, we presented the current scenario about stability and safety. Finally, the challenges and vacancy were discussed along with the potential uses of NCs in the cosmetics industry. This review serves as a resource for the advancement of nanocrystal technology in the cosmetics sector.

Spray freeze dried niclosamide nanocrystals embedded dry powder for high dose pulmonary delivery

Based on the drug repositioning strategy, niclosamide (NCL) has shown potential applications for treating COVID-19. However, the development of new formulations for effective NCL delivery is still challenging. Herein, NCL-embedded dry powder for inhalation (NeDPI) was fabricated by a novel spray freeze drying technology. The addition of Tween-80 together with 1,2-Distearoyl-sn-glycero-3-phosphocholine showed the synergistic effects on improving both the dispersibility of primary NCL nanocrystals suspended in the feed liquid and the spherical structure integrity of the spray freeze dried (SFD) microparticle. The SFD microparticle size, morphology, crystal properties, flowability and aerosol performance were systematically investigated by regulating the feed liquid composition and freezing temperature. The addition of leucine as the aerosol enhancer promoted the microparticle sphericity with greatly improved flowability. The optimal sample (SF_{- 80}D-N₂₀L₂D₂T₁) showed the highest fine particle fraction of ∼47.83%, equivalently over 3.8 mg NCL that could reach the deep lung when inhaling 10 mg dry powders.

Tacrolimus nanocrystals microneedle patch for plaque psoriasis

Plaque psoriasis is characterized by an abnormal thickening of the epidermis, which causes great difficulties for traditional topical drug delivery. Microneedles can pierce the thickened epidermis and deliver drugs to the skin for psoriasis treatment. Tacrolimus is a poorly water-soluble immunosuppressant used for the treatment of psoriasis. In this study, tacrolimus (TAC) nanocrystals (NCs) were produced using a bottom-up technique that dispersed TAC into a sodium hyaluronate-based microneedle patch (MNP), and its therapeutic efficacy was evaluated. The average particle size of the TAC NCs was 259.6 ± 2.3 nm. The mechanical strength of the microneedles was 0.41 ± 0.06 N/needle, which was sufficient to penetrate psoriatic skin. Microneedles were detached from the substrate 10 min after insertion into the psoriasis skin with an insertion depth of 258.8 ± 14.4 μm. The intradermal retention of the MNP (8.40 ± 0.33 μg/cm²) was six times that of the commercial ointment (1.40 ± 0.12 μg/cm²). In pharmacodynamic experiments, results indicated improvement in the phenotypic and histopathological features and reduction in the level of TNF-α, IL-17A, and IL-23 of psoriatic skin treated with TAC NCs MNP. Therefore, MNP loaded with TAC NCs may be a promising approach for psoriasis treatment.

Developed meloxicam loaded microparticles for colon targeted delivery: Statistical optimization, physicochemical characterization, and in-vivo toxicity study

The study aimed to fabricate and evaluate Meloxicam (MLX) loaded Hydroxypropyl Methylcellulose (HPMC) microparticles for colon targeting because MLX is a potent analgesic used in the treatment of pain and inflammation associated with colorectal cancer (CRC). Nevertheless, its efficiency is limited by poor solubility and gastrointestinal tracts (GIT) associated side effects. Seventeen formulations of MLX loaded HPMC microparticles were fabricated by the oil-in-oil (O/O)/ emulsion solvent evaporation (ESE) technique. A 3-factor, 3-level Box Behnken (BBD) statistical design was used to estimate the combined effects of the independent variables on the dependent variables (responses), such as the percent yield (R1), the entrapment efficiency (EE) (R2), mean particle size (R3) and in vitro percentage of cumulative drug release (R4). For physicochemical characterization FTIR, XRD, DSC, and SEM analyses were performed. Biocompatibility and non-toxicity were confirmed by in-vivo acute oral toxicity determination. The percentage yield and EE were 65.75-90.71%, and 70.62-88.37%, respectively. However, the mean particle size was 62.89-284.55 μm, and the in vitro cumulative drug release percentage was 74.25-92.64% for 24 hours. FTIR analysis showed that the composition of the particles was completely compatible, while XRD analysis confirmed the crystalline nature of the pure drug and its transition into an amorphous state after formulation. DSC analysis revealed the thermal stability of the formulations. The SEM analysis showed dense spherical particles. The toxicity study in albino rabbits showed no toxicity and was found biocompatible. The histopathological evaluation showed no signs of altered patterns. Results of this study highlighted a standard colonic drug delivery system with the ability to improve patient adherence and reduce GIT drug-associated side effects in CRC treatment.

Preparation, Characterization, and Evaluation of Breviscapine Nanosuspension and Its Freeze-Dried Powder

As a biopharmaceutics classification system (BCS) class IV drug, breviscapine (Bre) has low solubility in water, poor chemical stability, a short biological half-life and rapid removal from plasma. This paper prepared a Bre nanosuspension (Bre-NS) by an ultrasound-assisted anti-solvent precipitation method. Characterization of Bre-NS was studied using a Box–Behnken design concerning drug concentration in DMSO, an anti-solvent-to-solvent ratio, and sonication time. Under the optimized conditions of 170 mg/mL for the drug concentration, a 1:60 solvent-to-anti-solvent ratio, and a 9 min sonication time, the particle size of Bre-NS was 303.7 ± 7.3 nm, the polydispersity index was 0.178 ± 0.015, and the zeta potential was −31.10 ± 0.26 mV. Combined with the results from differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier transform-infrared spectroscopy (FT-IR), the findings indicated that the crystal form and chemical structure of Bre-NS did not change during the entire process. The optimized formulation displayed good stability, increased solubility, and better in vitro release. Therefore, the results of this study can be a reference for the delivery system design of insoluble active components and effective parts in traditional Chinese medicine.

Advancement of nanomedicines in chronic inflammatory disorders

Chronic diseases, as stated by the WHO, are a threat to human health which kill 3 out of every 5 people worldwide. Therapeutics for such illnesses can be developed using traditional medicine. However, it is not an easy path from natural products to Western pharmacological and pharmaceutical methods. For several decades, chronic inflammatory disorders, especially in Westernized countries, have increased incidence and prevalence. Several NSAIDs are used to decrease inflammation and pain; however, there are numerous negative consequences of these anti-inflammatory medications, whereas plant-based natural products have anti-inflammatory therapeutic benefits that have little or no adverse effects. Nanoparticles are a new type of drug delivery device that may be designed to provide excellent target selectivity for certain cells and tissues while also having a high drug loading capacity, resulting in better pharmacokinetics, pharmacodynamics (PKPD), and therapeutic bioavailability. The size and polarity of phytochemical compounds make it hard to pass the blood-brain barrier (BBB), blood-vessel endothelial lining, gastrointestinal tract and mucosa. In addition, the gastrointestinal system is enzymatically destroyed. Therefore, nanoparticles or nanocrystals might also be used for encapsulation or conjugation of these chemicals as a method to improve their organic effectiveness through their gastrointestinal stability, absorption rate and dispersion. The therapy of numerous inflammatory illnesses, including arthritis, gastritis, Nephritis, Hepatitis (Type A, B &C), ulcerative colitis, Alzheimer's disease, atherosclerosis, allergic responses (asthma, eczema) or autoimmune disorders, is characterised by nanoparticles. This review paper provides information on the numerous nanosystem described with their probable mechanism to treat chronic inflammatory diseases.

Nanocrystals based pulmonary inhalation delivery system: advance and challenge

Pulmonary inhalation administration is an ideal approach to locally treat lung disease and to achieve systemic administration for other diseases. However, the complex nature of the structural characteristics of the lungs often results in the difficulty in the development of lung inhalation preparations. Nanocrystals technology provides a potential formulation strategy for the pulmonary delivery of poorly soluble drugs, owing to the decreased particle size of drug, which is a potential approach to overcome the physiological barrier existing in the lungs and significantly increased bioavailability of drugs. The pulmonary inhalation administration has attracted considerable attentions in recent years. This review discusses the barriers for pulmonary drug delivery and the recent advance of the nanocrystals in pulmonary inhalation delivery. The presence of nanocrystals opens up new prospects for the development of novel pulmonary delivery system. The particle size control, physical instability, potential cytotoxicity, and clearance mechanism of inhaled nanocrystals based formulations are the major considerations in formulation development.

A ROS-responsive fluorescent probe detecting experimental colitis by functional polymeric nanoparticles

Current evidence shows that oxidative stress plays an essential role in the pathogenesis and progression of inflammatory bowel disease (IBD). TotalROX (λabs/λem = 425/525 nm) is a ratiometric probe with high detection sensitivity and a superior capacity to monitor total cellular oxidative capacity. Herein, we investigated the potential of combining totalROX with an oral nanoparticle delivery system to detect the degree of colitis. This detection system also featured pH-responsive Eudragit S100, hyaluronic acid with high affinity to the CD44 receptor, and chitosan, and demonstrated improved loading efficiency and stability. An experimental mouse model of experimental colitis was induced by dextran sodium sulfate do that we could investigate the ability of our nanoparticles to target the colon and determine the degree of inflammation. We also determined and validated the positive correlation between the fluorescence intensity of the detection product (Ox670, λabs/λem = 650/675 nm) and myeloperoxidase activity (R² = 0.97) and the histopathological score (R² = 0.98). TotalROX had significant ability to measure reactive oxygen species (ROS) produced by cells under inflammatory conditions, as confirmed by in vitro experiments with Caco-2 cells. Collectively, the data generated demonstrate that when loaded with totalROX, these functional nanoparticles are promising tools for cellular imaging after oral administration. This is the first description of a ROS-responsive fluorescent probe to evaluate the degree of colitis in experimental animal models and provides a promising approach for the diagnosis of inflammation in IBD with fluorescence-guided colonoscopy.

High-Payload Nanosuspension of Centella asiatica Extract for Improved Skin Delivery with No Irritation

Background

The titrated extract of Centella asiatica (CA) has received much attention as a cosmeceutical ingredient owing to its anti-wrinkle effect. However, due to the low solubility and high molecular weight of pharmacologically active constituents, including asiatic acid (AA), madecassic acid (MA), and asiaticoside (AS), it is challenging to fabricate high-payload topical preparations of CA with satisfactory skin absorption profiles.

Purpose

This study aimed to design a high-payload topical preparation of CA using nanocrystallization technique and to evaluate its skin absorption profile and local tolerability.

Methods

High-payload nanocrystal suspensions (NSs) were prepared using lab-scale bead-milling technology, by adjusting the type and amount of suspending agent, CA content, type of vehicle, and milling speed. CA-loaded NSs were characterized in terms of morphology, particle size, crystallinity, and in vitro dissolution pattern. Skin absorption of CA nanocrystals was evaluated using a vertical Franz diffusion cell mounted with porcine skin. In vivo skin irritation following topical application of high-payload NS was assessed in normal rats.

Results

The optimized NS system, composed of 10% (w/v) CA, 0.5% polyvinylpyrrolidone (PVP) K30 as steric stabilizer, and 89.5% of distilled water, was characterized as follows: spherical or elliptical in shape, 200 nm in size, with low crystallinity. The in vitro dissolution of AA or MA from NSs was markedly faster compared to raw material, under sink condition. Penetration of AA, MA, and AS in the porcine skin was markedly elevated using the high-payload NS formula, providing 5-, 4-, and 4.5-fold higher accumulation in skin layer, compared to that of the marketed cream formula (CA 1%, Madeca cream). Moreover, topical application of high-payload NS was tolerable, showing neither erythema nor oedema in normal rats.

Conclusion

The novel NS system is expected to be a virtuous approach for offering a better skin absorption of CA, without using an excess quantity of solubilizers.

Lyophilized Composite Loaded with Meloxicam-Peppermint oil Nanoemulsion for Periodontal Pain

Maintaining oral health helps to prevent periodontal inflammation and pain, which can progress into more detrimental issues if left untreated. Meloxicam (MX) is a commonly used analgesic for periodontal pain, but it can have adverse gastrointestinal effects and poor solubility. Therefore, this study aimed to enhance the solubility of MX by developing a self-nanoemulsifying drug delivery system (SNEDDS). Considering the anti-ulcer activity of peppermint oil (PO), it was added in a mixture with medium-chain triglyceride (MCT) to the MX-loaded SNEDDS formulation (MX-PO-SNEDDS). After optimization, MX-PO-SNEDDS exhibited a PO:MCT ratio of 1.78:1, surfactant mixture HLB value of 14, and MX:oil mix ratio of 1:15, a particle size of 47 ± 3 nm, stability index of 85 ± 4%, ex vivo J_ss of 4 ± 0.6 μg/cm²min, and ulcer index of 1 ± 0.25 %. Then, orally flash disintegrating lyophilized composites (MX-SNELCs) were prepared using the optimized MX-PO-SNEDDs. Results reveal that MX-SNELCs had a wetting time of 4 ± 1 s and disintegration time of 3 ± 1 s with a high in vitro MX release of 91% by the end of 60 min. The results of pharmacokinetic studies in human volunteers further demonstrated that, compared to a marketed MX tablets, MX-SNELCs provided a higher C_max, T_max, and AUC and a relatively greater bioavailability of 152.97 %. The successfully developed MX-SNELCs were found to be a better alternative than the conventional tablet dosage form, thus indicating their potential for further development in a clinically acceptable strategy for managing periodontal pain.

Enhanced Dermal Delivery of Flurbiprofen Nanosuspension Based Gel: Development and Ex Vivo Permeation, Pharmacokinetic Evaluations

PURPOSE

The objective of this study was to optimize the Flurbiprofen (FB) nanosuspension (NS) based gel and to investigate the in vitro release, ex vivo permeation, the plasma concentration-time profile and pharmacokinetic parameters.

METHODS

FB-NSs were developed using the wet milling process with the Design of Experiment (DoE) approach. The optimum FB-NS was characterized on the basis of SEM, DSC, XRPD, solubility and permeation studies. The dermal gel was prepared by incorporating FB-NS into HPMC gel. Then the in-vitro release, ex vivo permeation studies were performed, and pharmacokinetic studies were evaluated on rats.

RESULTS

The particle size, polydispersity index and zeta potential values of optimum NS were determined as 237.7 ± 6.8 nm, 0.133 ± 0.030 and - 30.4 ± 0.7 mV, respectively. By means of the surfactant content and nanosized particles of the nanosuspension, the solubility of FB was increased about 7-fold. The percentage permeated amount of FB from FB-NS gel (8.40%) was also found to be higher than the physical mixture (5.25%) and coarse suspension (reference) (2.08%) gels. The pharmacokinetic studies showed that the C_max of FB-NS gel was 2.5 times higher than the reference gel, while AUC_0-24 was 2.96 times higher.

CONCLUSION

FB-NSs were successfully prepared with a wet milling method and optimized with the DoE approach. The optimized FB nanosuspension gel provided better permeation and pharmacokinetic performance compared to FB coarse suspension gel.

Hair follicle targeting with curcumin nanocrystals: Influence of the formulation properties on the penetration efficacy

Nanocrystals are a universal formulation approach for improved drug delivery of poorly water-soluble drug substances. Besides oral application, also topical application of the nanocrystals is feasible, because the increased kinetic solubility of the nanocrystals results in an increased concentration gradient, thus fostering passive, dermal penetration. Nanocrystals are also promising for targeting drug substances into the hair follicle. After penetration into the hair follicle, the nanocrystals could form a depot from which the active is released into the hair follicle. Thus, leading to a long-lasting and very efficient dermal drug delivery. The efficacy of nanocrystals to penetrate the hair follicles and the influence of the vehicle in which the nanocrystals are suspended was not yet investigated. Therefore, in this study curcumin nanocrystals with a size of about 300 nm were produced and incorporated into gels with different properties. The efficacy to penetrate the hair follicles, as well as the passive, dermal penetration, was assessed on the ex-vivo pig ear model. Nanocrystals were efficiently taken up by the hair follicles and reached the lower part of the infundibulum. This region is optimal for efficient drug delivery because the barrier of the lower infundibulum is not fully developed and thus more permeable, which results in a less hindered passive diffusion of drug substances. The penetration efficacy of the nanocrystals into the hair follicles was not affected by the different types of vehicles, which represented either oleogels or hydrogels that varied in viscosity as well as in the type and the concentration of the gelling agent. All gels possessed a shear-thinning flow behavior and it is hypothesized that all gels fluidized during the skin massage, whereby leading to similarly low viscosities than the aqueous nanosuspension and thus to similar penetration results. The passive, dermal penetration of curcumin was different for the different gels and the main driving parameter leading to good passive diffusion was caused by good skin hydrating properties of the vehicle. The best passive penetration was achieved from hydrogels that contained a humectant. However, the addition of the humectant reduced the efficacy of the nanocrystals to penetrate the hair follicle. Data so far, therefore, suggest that hair follicle targeting with nanocrystals that are suspended in water or simple, shear-thinning gels is highly effective. However, the addition of other excipients, e.g. humectants, to these vehicles might cause changes in the penetration profiles. More research in this regard is needed to understand these observations in more detail.

Recent trends, challenges and future outlook of transdermal drug delivery systems for rheumatoid arthritis therapy

At present, several drug molecules have been used for the treatment of rheumatoid arthritis (RA). However, the utilization of these compounds through the oral and parenteral route is limited due to low bioavailability, rapid metabolism, poor absorption, first-pass effect, and serious adverse effects. A transdermal delivery system is an appealing option in this scenario, as it possesses the proficiency to overcome drawbacks associated with the oral and parenteral route. With the innovation of several enhancement strategies, many therapeutic agents have been administered transdermally, proposing an exceptional approach to treat RA. The present article provides an insight into the etiology and pathophysiology of RA. The challenges of the transdermal route and the strategies to improve those problems are described. The current advances in increasing the transdermal efficiency of the therapeutics against RA are discussed. Limitations and advantages regarding the state of the art transdermal delivery system and future outlook are also summarized.

Localised and sustained intradermal delivery of methotrexate using nanocrystal-loaded microneedle arrays: Potential for enhanced treatment of psoriasis

Methotrexate (MTX), typically used as its sodium salt (MTX Na), is a first-line treatments for moderate to severe psoriasis, showing good efficacy. However, its systemic administration is associated with many side effects. Intradermal delivery into psoriatic tissue could offer an alternative approach. However, successful intradermal administration of MTX Na is currently precluded by its physicochemical properties. Moreover, due to its hydrophilic nature, MTX Na is swiftly cleared from the target tissue, necessitating frequent dosing which may affect patient compliance. To address these limitations, we investigated the combination of nanocrystal (NC) and dissolving microneedle (MN) technologies as an alternative approach for localised and sustained intradermal delivery of MTX Na. Poorly water-soluble MTX nanocrystals (MTX NC) were produced by a bottom-up technique with a mean particle size of 678 ± 15 nm. Sustained in vitro drug release was observed over 72 h. The MTX NC were then incorporated into the shafts of dissolving MN arrays with a drug loading of 2.48 mg/array. The MTX NC-loaded MN arrays exhibited satisfactory mechanical strength and insertion capabilities in the skin-simulant Parafilm M® and their shafts dissolved entirely in less than 20 min after insertion into excised neonatal porcine skin. Importantly, in vivo studies in Sprague Dawley rats revealed that the MN arrays were able to deposit approximately 25.1% of the loaded MTX NC in the skin, which acted, in turn, as a drug depot and released the MTX in a sustained manner over 72 h, while minimising MTX systemic exposure. Indeed, 24 h from MN application, 312.70 ± 161.95 µg/g of MTX was retained in the skin at the application site. This was approximately 322-fold higher than the amount of MTX (0.942 ± 0.59 µg/g) retained in the skin after oral administration of MTX Na. Interestingly, even after 72 h after MN application, around 12.5% of the MTX NC deposited in the skin by the MN was retained. In contrast, the maximal blood concentration of MTX achieved following MN application, was only 40% of that measured after oral administration of MTX Na. Accordingly, MTX NC-loaded dissolving MN arrays could be a promising approach for effective localised and sustained intradermal delivery of MTX as a potential enhanced treatment for psoriasis.

Enhanced transdermal delivery of curcumin nanosuspensions: A mechanistic study based on co-localization of particle and drug signals

Nanosuspensions have received much attention in enhanced transdermal delivery. However, the corresponding mechanisms have not been clarified. In particular, whether nanosuspensions can directly penetrate across the stratum corneum (SC) and what is the transdermal route for the enhanced penetration. Therefore, curcumin (CUR) was adopted in this study as a model drug, while an aggregation-caused quenching (ACQ) probe was physically embedded in CUR nanosuspensions, i.e., the CUR hybrid nanosuspensions (CUR-HNSs), for bioimaging. The ACQ properties enable identification of intact CUR-HNSs. The co-localization of particle and CUR signals was exploited to outline the translocation profiles of intact nanosuspensions as well as the cargoes. Three sizes of CUR-HNSs are prepared, which are spherical and amorphous. CUR is poor in transdermal transport even in propylene glycol solution, which was enhanced by nanosuspensions. Although 400 nm CUR-HNSs present higher steady state flux than 140 nm and 730 nm ones, the cumulative amount of permeated CUR is yet less than 2% of the applied dose at 12 h. Co-localization of CUR and ACQ probe signals indicates that CUR-HNSs can infiltrate into the SC layer and accumulate in the hair follicles. The intact CUR-HNSs cannot enter into the skin. On the contrary, CUR molecules diffuse into the whole skin tissues following dissolution of CUR-HNSs in the SC and the hair follicles. In conclusion, nanosuspensions are advantageous for transdermal delivery of poorly permeable drugs by filtrate into the SC and accumulate in hair follicles.

Microfluidics for pharmaceutical nanoparticle fabrication: The truth and the myth

Using micro-sized channels to manipulate fluids is the essence of microfluidics which has wide applications from analytical chemistry to material science and cell biology research. Recently, using microfluidic-based devices for pharmaceutical research, in particular for the fabrication of micro- and nano-particles, has emerged as a new area of interest. The particles that can be prepared by microfluidic devices can range from micron size droplet-based emulsions to nano-sized drug loaded polymeric particles. Microfluidic technology poses unique advantages in terms of the high precision of the mixing regimes and control of fluids involved in formulation preparation. As a result of this, monodispersity of the particles prepared by microfluidics is often recognised as being a particularly advantageous feature in comparison to those prepared by conventional large-scale mixing methods. However, there is a range of practical drawbacks and challenges of using microfluidics as a direct micron- and nano-particle manufacturing method. Technological advances are still required before this type of processing can be translated for application by the pharmaceutical industry. This review focuses specifically on the application of microfluidics for pharmaceutical solid nanoparticle preparation and discusses the theoretical foundation of using the nanoprecipitation principle to generate particles and how this is translated into microfluidic design and operation.

Fabrication of Fine Puerarin Nanocrystals by Box-Behnken Design to Enhance Intestinal Absorption

Puerarin is widely used as a therapeutic agent to cardiovascular diseases in clinics in China through intravenous administration, which could elicit adverse drug reactions caused by cosolvents, hindering its application in clinics. Therefore, the development of oral dosage is urgently needed. In our previous studies, we proved that the bioavailability of puerarin increased as particle sizes of nanocrystals decreased; however, we have not optimized the best process parameters for nanocrystals. In this study, we aim to fabricate fine nanocrystals (with smallest particle size) by Box-Behnken design and study the intestinal permeability of puerarin and its nanocrystals via employing everted gut sac model and in situ perfusion model. The results showed that the Box-Behnken design could be used to optimize the producing parameters of puerarin nanocrystals, and the particle sizes of fine nanocrystals were about 20 nm. Results of everted gut sacs showed that the polyvinylpyrrolidone (PVP) and verapamil had no influence on the absorption of puerarin and nanocrystals, and the nanocrystals could increase the P_app of puerarin for 2.2-, 2.9-, and 2.9-folds, respectively, in duodenum, jejunum, and ileum. Enhanced Ka and Peff were observed on the nanocrystal group, compared with puerarin, and PVP and verapamil had no influence on the absorption of nanocrystals, while the absorption of puerarin was influenced by P-gp efflux. Combining the results mentioned above, we can conclude that the Box-Behnken design benefits the optimization for preparation of nanocrystals, and the nanocrystals could enhance the intestinal absorption of puerarin by enhanced permeability and inhibited P-gp efflux.

Study of Top-down and Bottom-up Approaches by Using Design of Experiment (DoE) to Produce Meloxicam Nanocrystal Capsules

In order to investigate the correlation among energy input-related, drug-related, and stabilizer-related aspects for both top-down and bottom-up nanocrystal production, meloxicam nanosuspensions (NS) were produced by using three different methods (low-energy wet milling, high-pressure homogenization, and precipitation) and each method was optimized by using design of experiment (DoE). Box-Behnken design of 3 factors and 3 levels was applied for the optimization of each method. All the three models were found to be significant and the optimized process parameters were used for production of NS, respectively. Interestingly, by comparison of the top-down and bottom-up approaches, the influence of energy input (homogenization pressure or milling speed) from the instruments seemed not significant for top-down compared with bottom-up for this drug. Different mechanisms of homogenization (relatively high energy zone) and milling (relatively low energy zone) led to obtained various significant correlations for each method. Capsules containing nanocrystals were successfully produced by using a novel method applying NS (after wet bead milling and homogenization processes) as wetting agent for direct capsuling and showed superiority regarding as dissolution rate compared with the traditional two-step method (freeze-dried powder used for capsuling as the first step). Different NS preparation methodologies proved to have a direct influence on the following capsuling process and consequently, in the dissolution rate. This study also proved that residual DMSO in nanosuspension after precipitation process could affect the freeze-drying process, which might further alter the redispersion and influence the downstream processes.

Fabrication of ultra-small nanocrystals by formation of hydrogen bonds: In vitro and in vivo evaluation

Poor water solubility and low bioavailability hinder the clinical application of about 70% of newly synthesized compounds. Nanocrystal technology has become a preferred way to improve bioavailability by improving solubility. However, it remains challenging to produce nanocrystals with ultra-small particle sizes to further enhance the extent of bioavailability. Herein, we constructed ultra-small puerarin nanocrystals (Pue-NCs) (20-40 nm) via formation of hydrogen bond during HPH. We confirmed the formation of hydrogen bonds by ¹H NMR and FTIR, and observed the distribution of polymer chains by SEM and TEM. The absorption mechanisms were studied in Caco-2 cell monolayers, and the results showed that the major transport mechanism for puerarin was passive diffusion, meanwhile, for Pue-NCs, the passive transport and micropinocytosis-mediated endocytosis coexisted. The absolute bioavailability of Pue-NCs was 35.28%, which was 11.54 folds compared to that of puerarin. Therapeutic equivalence was demonstrated between Pue-NCs and puerarin injection at 50 mg/kg and 15 mg/kg, respectively, in isoproterenol-induced myocardial ischemia model. This study provides a novel strategy for preparing ultra-small nanocrystals by HPH to increase bioavailability of poorly soluble drugs.

Drug nanocrystals: Fabrication methods and promising therapeutic applications

The drug nanocrystals (NCs) with unique physicochemical properties are now considered as a promising drug delivery system for poorly water-soluble drugs. So far >20 formulations of NCs have been approved in the market. In this review, we summarized recent advances of NCs with emphasis on their therapeutic applications based on administration route and disease states. At the end, we present a brief description of the future perspectives of NCs and their potential role as a promising drug delivery system. As a strategy for solubilization and bioavailability enhancement, the NCs have gained significant success. Besides this, the function of NCs is still far from developed. The emerging NC-based drug delivery approach would widen the applications of NCs in drug delivery and bio-medical field. Their in vitro and in vivo fate is extremely unclear; and the development of hybrid NCs with environment-sensitive fluorophores may assist to extend the scope of bio-imaging and provide better insight to their intracellular uptake kinetics, in vitro and in vivo.