Ethylenediaminetetraacetic acid (EDTA) enhances intracellular lipid staining with Nile red in microalgae Tetraselmis suecica

Physiological and Biochemical Responses of Bicarbonate Supplementation on Biomass and Lipid Content of Green Algae Scenedesmus sp. BHU1 Isolated From Wastewater for Renewable Biofuel Feedstock

In the present study, different microalgae were isolated from wastewater environment and evaluated for higher growth and lipid accumulation. The growth adaptability of all the isolated microalgae were tested for carbon source with supplementation of sodium bicarbonate in BG-11 N⁺ medium. Further based on the uptake rate of sodium bicarbonate and growth behavior, microalgal strains were selected for biofuel feedstock. During the study, growth parameters of all the isolates were screened after supplementation with various carbon sources, in which strain Scenedesmus sp. BHU1 was found highly effective among all. The efficacy of Scenedesmus sp. BHU1 strain under different sodium bicarbonate (4–20 mM) concentration, in which higher growth 1.4 times greater than control was observed at the concentration 12 mM sodium bicarbonate. In addition, total chlorophyll content (Chl-a + Chl-b), chlorophyll fluorescence (Fv/Fm, Y(II), ETR max, and NPQmax), and biomass productivity were found to be 11.514 μg/ml, 0.673, 0.675, and 31.167 μmol electrons m⁻² s⁻¹, 1.399, 59.167 mg/L/day, respectively, at the 12 mM sodium bicarbonate. However, under optimum sodium bicarbonate supplementation, 56.920% carbohydrate and 34.693% lipid content were accumulated, which showed potential of sodium bicarbonate supplementation in renewable biofuel feedstock by using Scenedesmus sp. BHU1 strain.

Rapid quantification of intracellular polyhydroxyalkanoates via fluorescence techniques: A critical review

Polyhydroxyalkanoates (PHA) are promising bioplastics with excellent physicochemical properties and biodegradability, whereas PHA products suffer from high manufacturing costs. To reduce costs of PHA production, experiments with mixed microbial cultures and low-cost substrates have been conducted widely, where rapid and robust PHA quantification methods are necessary. Compared with traditional gas chromatography methods, PHA fluorescence quantification (PHA-FQ) methods may be quicker, safer and more suitable for modern experiments with high throughput requirements. However, practical applications of PHA-FQ methods are still limited. Therefore, this review provides a comprehensive understanding of PHA-FQ methods. Performance of PHA-staining fluorochromes, relevant spectral properties, and important staining procedures are summarized. Current developments of PHA-FQ protocols are critically reviewed. Main considerations needed to make PHA-FQ protocol reliable are comprehensively discussed. Finally, potential improvements in various aspects of PHA-FQ methods are highlighted. This review could help researchers develop more effective PHA-FQ methods and facilitate future experiments related to PHA.

Role of Autophagy in Haematococcus lacustris Cell Growth under Salinity

The microalga Haematococcus lacustris (formerly H. pluvialis) is able to accumulate high amounts of the carotenoid astaxanthin in the course of adaptation to stresses like salinity. Technologies aimed at production of natural astaxanthin for commercial purposes often involve salinity stress; however, after a switch to stressful conditions, H. lacustris experiences massive cell death which negatively influences astaxanthin yield. This study addressed the possibility to improve cell survival in H. lacustris subjected to salinity via manipulation of the levels of autophagy using AZD8055, a known inhibitor of TOR kinase previously shown to accelerate autophagy in several microalgae. Addition of NaCl in concentrations of 0.2% or 0.8% to the growth medium induced formation of autophagosomes in H. lacustris, while simultaneous addition of AZD8055 up to a final concentration of 0.2 µM further stimulated this process. AZD8055 significantly improved the yield of H. lacustris cells after 5 days of exposure to 0.2% NaCl. Strikingly, this occurred by acceleration of cell growth, and not by acceleration of aplanospore formation. The level of astaxanthin synthesis was not affected by AZD8055. However, cytological data suggested a role of autophagosomes, lysosomes and Golgi cisternae in cell remodeling during high salt stress.

Isolation and Profiling of Circulating Tumor-Associated Exosomes Using Extracellular Vesicular Lipid-Protein Binding Affinity Based Microfluidic Device

Extracellular vesicles (EVs) are emerging as a potential diagnostic test for cancer. Owing to the recent advances in microfluidics, on-chip EV isolation is showing promise with respect to improved recovery rates, smaller necessary sample volumes, and shorter processing times than ultracentrifugation. Immunoaffinity-based microfluidic EV isolation using anti-CD63 is widely used; however, anti-CD63 is not specific to cancer-EVs, and some cancers secrete EVs with low expression of CD63. Alternatively, phosphatidylserine (PS), usually expressed in the inner leaflet of the lipid bilayer of the cells, is shown to be expressed on the outer surface of cancer-associated EVs. A new exosome isolation microfluidic device (new ExoChip), conjugated with a PS-specific protein, to isolate cancer-associated exosomes from plasma, is presented. The device achieves 90% capture efficiency for cancer cell exosomes compared to 38% for healthy exosomes and isolates 35% more A549-derived exosomes than an anti-CD63-conjugated device. Immobilized exosomes are then easily released using Ca2+ chelation. The recovered exosomes from clinical samples are characterized by electron microscopy and western-blot analysis, revealing exosomal shapes and exosomal protein expressions. The new ExoChip facilitates the isolation of a specific subset of exosomes, allowing the exploration of the undiscovered roles of exosomes in cancer progression and metastasis.

How to use Nile Red, a selective fluorescent stain for microalgal neutral lipids

The use of Nile Red for rapid monitoring of the neutral lipid content in microalgae has gained interest over the last decade, since neutral lipids are feedstock for renewable transportation fuel. In this review, we discuss the main considerations needed to make an NR protocol reliable for staining neutral lipids in microalgae. Cell wall permeability must be enhanced by using stain carriers: DMSO (5% v/v to 25% v/v), glycerol (0.1 to 0.125mg/mL), or EDTA (3.0 to 3.8mg/mL). Temperatures between 30 and 40°C facilitate the diffusion of NR through the cell wall without incurring excess quenching. Good NR-lipid interaction requires using a low NR/cell ratio; the NR concentration must be between 0.25μg/mL and 2.0μg/mL, and the cell concentration >5×10(4)cells/mL. In order to have the maximum and stable NR fluorescence, it is necessary to scan the excitation/emission wavelengths for up to a 40-min of incubation time. We outline a five-step method to customize the Nile Red protocol to a specific strain: 1) Evaluate the strain's suitability by checking for the presence of neutral lipid, 2) Select of the best excitation/emission wavelength, 3) Optimization of incubation time, stain carrier, dye concentration, and temperature, 4) Prepare single-strain algal cultures with different lipid contents to calibrate NR fluorescence with neutral-lipid content, and 5) Correlate NR fluorescence intensity to neutral lipid content for the same strain. Once the protocol is customized, the NR method allows for rapid and reliable monitoring of neutral lipid content of a microalgae strain.

Advances in techniques for assessment of microalgal lipids

Microalgae are a varied group of organisms with considerable commercial potential as sources of various biochemicals, storage molecules and metabolites such as lipids, sugars, amino acids, pigments and toxins. Algal lipids can be processed to bio-oils and biodiesel. The conventional method to estimate algal lipids is based on extraction using solvents and quantification by gravimetry or chromatography. Such methods are time consuming, use hazardous chemicals and are labor intensive. For rapid screening of prospective algae or for management decisions (e.g. decision on timing of harvest), a rapid, high throughput, reliable, accurate, cost effective and preferably nondestructive analytical technique is desirable. This manuscript reviews the application of fluorescent lipid soluble dyes (Nile Red and BODIPY 505/515), nuclear magnetic resonance (NMR), Raman, Fourier transform infrared (FTIR) and near infrared (NIR) spectroscopy for the assessment of lipids in microalgae.

Efficacy of EDTA and Phosphorous on Biomass Yield and Total Lipid Accumulation in Two Green Microalgae with Special Emphasis on Neutral Lipid Detection by Flow Cytometry

Chlorella ellipsoidea and Chlorococcum infusionum, promising microalgae for biodiesel feedstock production, were treated with ethylenediaminetetraacetate (EDTA) and phosphorous to induce stress which was then followed by flow cytometry to study the enhanced intracellular neutral lipid content. Treatment resulted in up to a threefold increase in total lipid content of Chlorella (41.8±1.9% at 16 days of incubation period) and more than twofold increases in Chlorococcum (31.3±1.0% at 18 days of incubation period) under phosphorous starvation in the culture. It was observed that maximum biomass yields in Chlorella and Chlorococcum were 1.56±0.06 and 2.17±0.12 g/L at 1.5 g/L of phosphorous after 20 and 18 days of incubation periods, respectively. The qualitative analyses of neutral lipid bodies under stress conditions were performed by confocal microscopy and revealed bright golden-yellow lipid droplets in stress exposed cells. Significant increase of monounsaturated fatty acids under the nutrient limited conditions was suitable to produce biodiesel. The maximum biomass (g/L) and lipid content (% dry cell weight) at different stresses showed significant results (p<0.05) by single-factor Analysis of Variance (ANOVA) followed by Duncan’s Multiple Range Test (DMRT).