Algal-microbial community collaboration for energy recovery and nutrient remediation from wastewater in integrated photobioelectrochemical systems

Effect of long-term exposure of mixture of ZnO and CuO nanoparticles on Scenedesmus obliquus

The present study investigated the possible toxic effect of ZnO and CuO nanoparticles (NPs) on freshwater microalgae, Scenedesmus obliquus at environmentally- relevant nanoparticle concentration (1 mg/L) and high concentration (10 mg/L) in BG-11 medium under white light LED-illumination over 35 days. The effect of time on the stability of media, nanoparticles, and their relation to toxicity to algae was also studied. The transmission electron microscopy indicated structural damage to algae due to the presence of a mixture of nanoparticles (at 10 mg/L). FTIR (Fourier Transform infrared) analysis of a sample containing a mixture of nanoparticles showed an addition of bonds and a difference in the peak location and its intensity values. The inhibition time for biomass was observed between 14 days and 21 days at 10 mg/L NPs. At 1 mg/L, the order of toxicity of NPs to algae was found to be: CuO NPs (highest toxicity) > ZnO NPs>ZnO + CuO NPs (least toxicity). During exposure of algae cells to a mixture of NPs at 10 mg/L NP concentration, a smaller value of metal deposition was observed than that during exposure to individual NPs. Antagonistic toxic effects of two NPs on dry cell weight of algae was observed at both concentration levels. Future work is needed to understand the steps involved in toxicity due to mixture of NPs to algae so that environmental exposures of algae to NPs can be managed and minimized.

Green and Sustainable Membranes: A review

Membranes are ubiquitous tools for modern water treatment technology that critically eliminate hazardous materials such as organic, inorganic, heavy metals, and biomedical pollutants. Nowadays, nano-membranes are of particular interest for myriad applications such as water treatment, desalination, ion exchange, ion concentration control, and several kinds of biomedical applications. However, this state-of-the-art technology suffers from some drawbacks, e.g., toxicity and fouling of contaminants, which makes the synthesis of green and sustainable membranes indeed safety-threatening. Typically, sustainability, non-toxicity, performance optimization, and commercialization are concerns centered on manufacturing green synthesized membranes. Thus, critical issues related to toxicity, biosafety, and mechanistic aspects of green-synthesized nano-membranes have to be systematically and comprehensively reviewed and discussed. Herein we evaluate various aspects of green nano-membranes in terms of their synthesis, characterization, recycling, and commercialization aspects. Nanomaterials intended for nano-membrane development are classified in view of their chemistry/synthesis, advantages, and limitations. Indeed, attaining prominent adsorption capacity and selectivity in green-synthesized nano-membranes requires multi-objective optimization of a number of materials and manufacturing parameters. In addition, the efficacy and removal performance of green nano-membranes are analyzed theoretically and experimentally to provide researchers and manufacturers with a comprehensive image of green nano-membrane efficiency under real environmental conditions.

Examining current trends and future outlook of bio-electrochemical systems (BES) for nutrient conversion and recovery: an overview

Nutrient-rich waste streams from domestic and industrial sources and the increasing application of synthetic fertilizers have resulted in a huge-scale influx of reactive nitrogen and phosphorus in the environment. The higher concentrations of these pollutants induce eutrophication and foster degradation of aquatic biodiversity. Besides, phosphorus being non-renewable resource is under the risk of rapid depletion. Hence, recovery and reuse of the phosphorus and nitrogen are necessary. Over the years, nutrient recovery, low-carbon energy, and sustainable bioremediation of wastewater have received significant interest. The conventional wastewater treatment technologies have higher energy demand and nutrient removal entails a major cost in the treatment process. For these issues, bio-electrochemical system (BES) has been considered as sustainable and environment friendly wastewater treatment technologies that utilize the energy contained in the wastewater so as to recovery nutrients and purify wastewater. Therefore, this article comprehensively focuses and critically analyzes the potential sources of nutrients, working mechanism of BES, and different nutrient recovery strategies to unlock the upscaling opportunities. Also, economic analysis was done to understand the technical feasibility and potential market value of recovered nutrients. Hence, this review article will be useful in establishing waste management policies and framework along with development of advanced configurations with major emphasis on nutrient recovery rather than removal from the waste stream.

Advancements in algal membrane bioreactors: Overcoming obstacles and harnessing potential for eliminating hazardous pollutants from wastewater

This paper offers a comprehensive analysis of algal-based membrane bioreactors (AMBRs) and their potential for removing hazardous and toxic contaminants from wastewater. Through an identification of contaminant types and sources, as well as an explanation of AMBR operating principles, this study sheds light on the promising capabilities of AMBRs in eliminating pollutants like nitrogen, phosphorus, and organic matter, while generating valuable biomass and energy. However, challenges and limitations, such as the need for process optimization and the risk of algal-bacterial imbalance, have been identified. To overcome these obstacles, strategies like mixed cultures and bioaugmentation techniques have been proposed. Furthermore, this study explores the wider applications of AMBRs beyond wastewater treatment, including the production of value-added products and the removal of emerging contaminants. The findings underscore the significance of factors such as appropriate algal-bacterial consortia selection, hydraulic and organic loading rate optimization, and environmental factor control for the success of AMBRs. A comprehensive understanding of these challenges and opportunities can pave the way for more efficient and effective wastewater treatment processes, which are crucial for safeguarding public health and the environment.

Integration of third generation biofuels with bio-electrochemical systems: Current status and future perspective

Biofuels hold particular promise as these can replace fossil fuels. Algae, in particular, are envisioned as a sustainable source of third-generation biofuels. Algae also produce several low volume high-value products, which enhance their prospects of use in a biorefinery. Bio-electrochemical systems such as microbial fuel cell (MFC) can be used for algae cultivation and bioelectricity production. MFCs find applications in wastewater treatment, CO₂ sequestration, heavy metal removal and bio-remediation. Oxidation of electron donor by microbial catalysts in the anodic chamber gives electrons (reducing the anode), CO_2, and electrical energy. The electron acceptor at the cathode can be oxygen/NO₃ ^-/NO₂ ^-/metal ions. However, the need for a continuous supply of terminal electron acceptor in the cathode can be eliminated by growing algae in the cathodic chamber, as they produce enough oxygen through photosynthesis. On the other hand, conventional algae cultivation systems require periodic oxygen quenching, which involves further energy consumption and adds cost to the process. Therefore, the integration of algae cultivation and MFC technology can eliminate the need of oxygen quenching and external aeration in the MFC system and thus make the overall process sustainable and a net energy producer. In addition to this, the CO₂ gas produced in the anodic chamber can promote the algal growth in the cathodic chamber. Hence, the energy and cost invested for CO₂ transportation in an open pond system can be saved. In this context, the present review outlines the bottlenecks of first- and second-generation biofuels along with the conventional algae cultivation systems such as open ponds and photobioreactors. Furthermore, it discusses about the process sustainability and efficiency of integrating algae cultivation with MFC technology in detail.

Variation in phytoplankton diversity during phycoremediation in a polluted Colombian Caribbean swamp

Phytoplankton composition and abundance are considered among the bioindicators of variations in water quality, due to its sensitivity and rapid responses to changes in environmental parameters. The selection and scaling of the Microalgal Predominant Microbial Consortium (MPMC) were based on live samples collected from the Santiago Apóstol Swamp (SAS) and the Arroyo Grande de Corozal (AGC). The inoculum was scaled in a phycoculture plant, and the inoculation process was performed in the AGC that flows into the SAS. The phytoplankton community monitoring was performed from May 2019 to September 2021. In the process, a total of 1,652,258 gallons were inoculated. Precisely, 103 and 124 species were found in the AGC and SAS, respectively. By evaluating the physical, chemical, and microbiological variables in SAS in a multitemporal way based on the inoculation of the MPMC, it is possible to identify the variables that presented the greatest reduction. The density of SAS presented associations with dissolved oxygen, thermotolerant coliforms, Enterococci, pH, phosphorus, nitrates, speed, and Secchi. The AGC and SAS presented high trophic levels (eutrophication). This contamination by organic matter is probably due to the discharges of the domestic tributaries. The diversity of microalgae and cyanobacteria found in this study allows us to know the anthropogenic impact. The density of microalgae showed the positive impact of the treatment with MCPM, where there was a decrease in the species that denote organic contamination. The phytoremediation treatment was effective in terms of the changes observed in the physicochemical variables, and these changes were directly due to the efficiency of the treatment and not the natural behavior of the water sources in the region.

Growth parameters and responses of green algae across a gradient of phototrophic, mixotrophic and heterotrophic conditions

Many studies have shown that algal growth is enhanced by organic carbon and algal mixotrophy is relevant for physiology and commercial cultivation. Most studies have tested only a single organic carbon concentration and report different growth parameters which hampers comparisons and improvements to algal cultivation methodology. This study compared growth of green algae Chlorella vulgaris and Chlamydomonas reinhardtii across a gradient of photoautotrophic-mixotrophic-heterotrophic culture conditions, with five acetate concentrations. Culture growth rates and biomass achieved were compared using different methods of biomass estimation. Both species grew faster and produced the most biomass when supplied with moderate acetate concentrations (1-4 g L^-1), but light was required to optimize growth rates, biomass yield, cell size and cell chlorophyll content. Higher acetate concentration (10 g L^-1) inhibited algal production. The choice of growth parameter and method to estimate biomass (optical density (OD), chlorophyll a fluorescence, flow cytometry, cell counts) affected apparent responses to organic carbon, but use of OD at 600, 680 or 750 nm was consistent. There were apparent trade-offs among exponential growth rate, maximum biomass, and culture time spent in exponential phase. Different cell responses over 1-10 g L^-1 acetate highlight profound physiological acclimation across a gradient of mixotrophy. In both species, cell size vs cell chlorophyll relationships were more constrained in photoautotrophic and heterotrophic cultures, but under mixotrophy, and outside exponential growth phase, these relationships were more variable. This study provides insights into algal physiological responses to mixotrophy but also has practical implications for choosing parameters for monitoring commercial algal cultivation.

Epibenthic microbial mats behavior as phosphorus sinks or sources in relation to biological and physicochemical conditions

Microbial mats are complex microecosystems that have shown promise as possible green filters to remediate polluted seawater. This usage would possibly require changing the natural conditions under which these microbial mats prosper in order to maximize their contact with the water. Thus, it is necessary to evaluate the adaptation of the mats to different environmental conditions, while monitoring their short-term efficiency at nutrient removal. To that aim, epibenthic microbial mats collected from a tidal flat in the Bahía Blanca Estuary, were incubated under different flooding conditions (periodically exposed to the air or continuously flooded), with and without the addition of a high phosphorus concentration (5 mg PO₄^3- L^-1), and with and without the presence of penicillin. This last condition was added to understand the influence of penicillin-sensitive microbes on cyanobacteria and diatom communities and their importance for P remediation. The presence of high P concentrations as well as the continual flooding of the mats resulted in the decrease of the dominant cyanobacterium, Coleofasciculus (Microcoleus) chthonoplastes, giving rise to the dominance of other genera such as Arthrospira sp. Or Oscillatoria sp., depending on the presence or absence of the antibiotic, respectively. Water P removal was highly efficient (60-87%) when the mats were treated with the high-P water. However, microbial mat behavior changed from P sink to source when mats where incubated in seawater with no P addition, suggesting that mats can both function as P sinks and sources, depending on the condition of the water they come in contact with.

Advancements in Bioelectricity Generation Through Nanomaterial-Modified Anode Electrodes in Microbial Fuel Cells

The use of nanotechnology in bioelectrochemical systems to recover bioelectricity and metals from waste appears to be a potentially appealing alternative to existing established procedures. This trend exactly characterizes the current renewable energy production technology. Hence, this review focuses on the improvement of the anode electrode by using different functional metal oxide-conducting polymer nanocomposites to enhance microbial fuel cell (MFC) performance. Enhancement of interfacial bioelectrocatalysis between electroactive microorganisms and hierarchical porous nanocomposite materials could enhance cost-effective bioanode materials with superior bioelectrocatalytic activity for MFCs. In this review, improvement in efficiency of MFCs by using iron oxide- and manganese oxide-based polypyrrole hybrid composites as model anode modifiers was discussed. The review also extended to discussing and covering the principles, components, power density, current density, and removal efficiencies of biofuel cell systems. In addition, this research review demonstrates the application of MFCs for renewable energy generation, wastewater treatment, and metal recovery. This is due to having their own unique working principle under mild conditions and using renewable biodegradable organic matter as a direct fuel source.

Photo-electrochemical Osmotic System Enables Simultaneous Metal Recovery and Electricity Generation from Wastewater

Global depletion of natural resources provides an impetus for developing low-cost, environmentally benign technologies for the recovery of valuable resources from wastewater. In this study, we present an autonomous photo-electrochemical osmotic system (PECOS) that can recover a wide range of metals from simulated metal-laden wastewater with sunlight illumination while generating electricity. The PECOS comprises a draw solution chamber with a nickel nanoparticle-functionalized titanium nanowire (Ni-TiNA) photoanode, a feed solution chamber containing synthetic wastewater with an immersed carbon fiber cathode, and a forward osmosis (FO) membrane mounted between the chambers as a separator. Using a Na₂-EDTA anolyte as a draw solution at neutral pH, we demonstrate that a sunlit PECOS achieves copper recovery at a rate of 51 g h^-1 per m^-2 of membrane area from simulated copper-laden wastewater while simultaneously producing a maximum power density of 228 mW m^-2. Moreover, because of the osmotic pressure difference generated by the photo-electrochemical reactions, the PECOS reduces the wastewater volume by extracting fresh water through the FO membrane at a water flux of 0.84 L m^-2 h^-1. We further demonstrate the feasibility of the PECOS in recovering diverse metals from a simulated metal-laden industrial wastewater under sunlight irradiation. Our proof-of-concept PECOS prototype provides a sustainable technological solution that leverages sunlight in an electrochemical osmotic system to recover multiple resources from wastewater.

Combined microalgal photobioreactor/microbial fuel cell system: Performance analysis under different process conditions

Increasing energy demands and greenhouse gases emission from wastewater treatment processes prompted the investigation of alternatives capable to achieve effective treatment, energy and materials recovery, and reduce environmental footprint. Combination of microbial fuel cell (MFC) technology with microalgal-based process in MFC-PBR (photobioreactor) systems could reduce greenhouse gases emissions from wastewater treatment facilities, capturing CO₂ emitted from industrial facilities or directly from the atmosphere. Microalgae production could enhance recovery of wastewater-embedded resources. Two system MFC-PBR configurations were tested and compared with a control MFC, under different operating conditions, using both synthetic and agro-industrial wastewater as anolytes. COD removal efficiency (ηCOD) and energy production were monitored during every condition tested, reaching ηCOD values up to 99%. Energy recovery efficiency and energy losses were also evaluated. The system equipped with microalgal biocathode proved to be capable to efficiently treat real wastewater, surpassing the effectiveness of the control unit under specific conditions. Oxygen provided by the algae improves the overall energy balance of this system, which could be further enhanced by many possible resources recovery opportunities presented by post-processing of the cathodic effluent.

Development and validation of a photobioreactor for uniform distribution of light intensity along the optical path based on numerical simulation

A theoretical approach was followed to optimize the design of a cylindrical photobioreactor for wastewater treatment based on algal culture. In particular, the problem of uneven light distribution that impairs algal growth was minimized by optimizing the area of uniform illumination distribution for a bioreactor design that can be enlarged without affecting its performance. The theoretical analysis was based on modeled simulations to determine the best configuration and illumination mode. The Monte Carlo method was used to simulate the illumination distribution inside the bioreactor, and the relationships between the width of the area with uniform illumination and related parameters were explored. Based on these theoretical considerations and predictions, an actual experimental photobioreactor was built containing a working area (where culture of Chlorella pyrenoidosa was enabled) and a catchment area for effluent. The performance of this bioreactor was tested with synthetic wastewater as a substrate. The light distribution was found to be relatively uniform inside the bioreactor, supporting excellent algal growth and resulting in maximum removal rates of 84.41% for total nitrogen, 99.73% for total phosphorus, 85.03% for NH₄⁺-N, and 75.94% for chemical oxygen demand (COD) over a period of 32 days of operation. The presented approach provides new insights for improving the efficiency and scalability of photobioreactors and promotes their development for wastewater treatment and resource utilization.

Valorising nutrient-rich digestate: Dilution, settlement and membrane filtration processing for optimisation as a waste-based media for microalgal cultivation

Digestate produced from the anaerobic digestion of food and farm waste is primarily returned to land as a biofertiliser for crops, with its potential to generate value through alternative processing methods at present under explored. In this work, valorisation of a digestate resulting from the treatment of kitchen and food waste was investigated, using dilution, settlement and membrane processing technology. Processed digestate was subsequently tested as a nutrient source for the cultivation of Chlorella vulgaris, up to pilot-scale (800L). Dilution of digestate down to 2.5% increased settlement rate and induced release of valuable compounds for fertiliser usage such as nitrogen and phosphorus. Settlement, as a partial processing of digestate offered a physical separation of liquid and solid fractions at a low cost. Membrane filtration demonstrated efficient segregation of nutrients, with micro-filtration recovering 92.38% of phosphorus and the combination of micro-filtration, ultra-filtration, and nano-filtration recovering a total of 94.35% of nitrogen from digestate. Nano-filtered and micro-filtered digestates at low concentrations were suitable substrates to support growth of Chlorella vulgaris. At pilot-scale, the microalgae grew successfully for 28 days with a maximum growth rate of 0.62 day^-1 and dry weight of 0.86  g⋅L^-1. Decline in culture growth beyond 28 days was presumably linked to ammonium and heavy metal accumulation in the cultivation medium. Processed digestate provided a suitable nutrient source for successful microalgal cultivation at pilot-scale, evidencing potential to convert excess nutrients into biomass, generating value from excess digestate and providing additional markets to the anaerobic digestion sector.

Successful bio-electrochemical treatment of nitrogenous mariculture wastewater by enhancing nitrogen removal via synergy of algae and cathodic photo-electro-catalysis

Systems with catalytic cathode in microbial fuel cell can achieve high treatment efficiency enhanced by the cathode. Such bio-electrochemical systems have potential applications in treating high-salinity nitrogenous mariculture wastewater. For sustainable development of the mariculture industry, enhancing inorganic nitrogen removal is of vital importance due to the low carbon to nitrogen (C/N) ratio of wastewater and strict discharge standard. Herein, simulated mariculture wastewater (high salinity, low COD/N ratio of 0.5-1.0) was successfully treated in an integrated self-biased bio-electrochemical system, with catalyst (TiO₂/Co-WO₃/SiC) on the cathode and natural-grown algae in the cathode chamber. Satisfactory nitrogen removal (94.05% NH₄⁺-N and 77.35% inorganic nitrogen) and favorable 76.66% removal of organics (UV₂₅₄) were both achieved, with visible light illumination. The NH₄⁺-N in the effluent was below 2 mg L^-1. The synergy of bacteria, algae and cathode, promoted pollutant removal, and made the system sustainable and efficient in treating mariculture wastewater.

Toward enhanced performance of integrated photo-bioelectrochemical systems: Taxa and functions in bacteria-algae communities

An integrated photo-bioelectrochemical (IPB) system uses microalgae in the cathode of a microbial fuel cell to achieve higher electricity generation and nutrient removal from wastewater. Using multivariate analysis and surveys of IPB studies, this paper identifies key algal and bacterial taxa and discusses their functions critical for IPB performance. Unicellular algae with high photosynthetic oxygen production and biofilm formation can enhance IPB energy production. Diverse bacterial taxa achieve nitrogen transformations and can improve total nitrogen removal. Understanding bacteria-algae interactions via quorum sensing in the IPB cathode may potentially aid in boosting system performance. Future advances in development of IPBs for wastewater treatment will benefit from interdisciplinary collaboration in analysis of microbial community functions.

Short-term efficiency of epibenthic microbial mat components on phosphorus sorption

Microbial mats may be an alternative tool for phosphorus (P) remediation of eutrophic coastal waters. The main objective of this work was to determine the importance that the living and non-living components of the mats have on P short-term sorption. Microbial mats were collected in the Paso Seco coastal flat, Argentina (40°38'3.32″S; 62°12'24.85″W), and incubated under controlled conditions in the lab. An adsorption curve was performed with the microbial mats. Active mats had a Freundlich constant 8.9-fold higher than underlying sandy sediments. Collected samples were then treated as follows: maintaining and disturbing their structural integrity (natural and autoclaved, respectively), and both conditions were incubated with filtered seawater, without and with phosphate addition (0 and 5 mg P L^-1, respectively). Natural mats had a significantly-higher phosphate removal percentage than autoclaved ones, suggesting that living microorganisms increase P short-term sorption efficiency by ~25%, while non-living matter may account for the rest.

Effects of bacterial inoculation and nitrogen loading on bacterial-algal consortium composition and functions in an integrated photobioelectrochemical system

An integrated photo-bioelectrochemical system (IPB) for wastewater treatment combines a microbial fuel cell with an algal bioreactor, eliminating requirements for aeration, promoting electricity generation, remediating nutrients and producing algal biomass for conversion into biofuel or other bioproducts. To examine strategies for improving IPB functions of electrochemical output and nutrient removal efficiency, this study tested effects of cathode bacterial inoculation and nitrogen loading on cathode microbial community and IPB performance. IPB cathodes were inoculated with the green alga Chlorella vulgaris, in combination with nitrite-oxidizing bacteria (NOB) Nitrobacter winogradskyi, and/or ammonium-oxidizing bacteria (AOB) Nitrosomonas europaea. IPB performance was examined before and after nitrifying bacteria inoculations and under three ammonium loading concentrations in the wastewater medium. Bacterial communities in the cathode suspension and biofilm were examined by 16S rRNA gene sequence analysis. Relative to the algae only control, cathode inoculation with NOB and/or AOB improved net nutrient removal, but resulted in reduced dissolved oxygen availability, which impaired electricity generation. Higher ammonium loading increased electricity production and nutrient removal, possibly by overcoming algal-bacterial competition. Inoculation with nitrifying bacteria resulted in minor changes to total bacterial composition and AOB or NOB comprised <3% of total sequences after 1 month. Community composition changed more dramatically following increase in ammonium-N concentration from 40 to 80 mg L^-1. Manipulation of N loading could be a useful strategy to improve IPB performance, while inoculation of AOB or NOB may be beneficial for treatment of water with high ammonium loading when N removal is the primary system goal.

Synergy of biofuel production with waste remediation along with value-added co-products recovery through microalgae cultivation: A review of membrane-integrated green approach

Development of advanced biofuels such as bioethanol and biodiesel from renewable resources is critical for the earth's sustainable management and to slow down the global climate change by partial replacement of gasoline and diesel in the transport sector. Being a diverse group of aquatic micro-organisms, algae are the most prominent resources on the planet, distributed in an aquatic system, a potential source of bioenergy, biomass and secondary metabolites. Microalgae-based biofuel production is widely accepted as non-food fuel sources and better choice for achieving goals of incorporation of a clean fuel source into the transportation sector. The present review article provides a comprehensive literature survey as well as a novel approach on the application of microalgae for their simultaneous cultivation and bioremediation of high nutrient containing wastewater. In addition to that, merits and demerits of different existing conventional techniques for microalgae culture reactors, harvesting of algal biomass, oil recovery, use of different catalysts for transesterification reactions and other by-products recovery have been discussed and compared with the membrane-based system to find out the best optimal conditions for higher biomass as well as lipid yield. This article also deals with the use of a tailor-made membrane in an appropriate module that can be used in upstream and downstream processes during algal-based biofuels production. Such membrane-integrated system has the potential of low-cost and eco-friendly separation, purification and concentration enrichment of biodiesel as well as other valuable algal by-products which can bring the high degree of process intensification for scale-up at the industrial stage.

Potential applications of algae in the cathode of microbial fuel cells for enhanced electricity generation with simultaneous nutrient removal and algae biorefinery: Current status and future perspectives

Production of biofuels and other value-added products from wastewater along with quality treatment is an uttermost necessity to achieve environmental sustainability and promote bio-circular economy. Algae-Microbial fuel cell (A-MFC) with algae in cathode chamber offers several advantages e.g. photosynthetic oxygenation for electricity recovery, CO₂-fixation, wastewater treatment, etc. However, performance of A-MFC depends on several operational parameters and also on electrode materials types; therefore, enormous collective efforts have been made by researchers for finding optimal conditions in order to enhance A-MFC performance. The present review is a comprehensive snapshot of the recent advances in A-MFCs, dealing two major parts: 1) the power generation, which exclusively outlines the effect of different parameters and development of cutting edge cathode materials and 2) wastewater treatment at cathode of A-MFC. This review provides fundamental knowledge, critical constraints, current status and some insights for making A-MFC technology a reality at commercial scale operation.

Wastewater Biofilm Photosynthesis in Photobioreactors

Photosynthetic performance of algal-bacterial biofilms from an Italian wastewater treatment plant was studied in a flow-lane photobioreactor at different irradiances, temperatures, and flow regime to evaluate the effects of these environmental parameters on biofilms’ functioning, in view of application of these communities in wastewater biological treatment. Pulse amplitude modulated fluorescence was used to estimate the effective quantum yield of PSII (ΔF/F_m’) of the light-acclimated biofilms and to perform rapid light curves (RLCs) for the determination of the photosynthetic parameters (rel.ETR_max, α, I_k). Chl a, ash free dry weight (AFDW), and dry weight (DW) were measured to assess phototrophic and whole biofilm biomass development over time. From the analysis of photosynthetic parameter variation with light intensity, temperature and flow rate, it was possible to identify the set of experimental values favoring biofilm photosynthetic activity. Biomass increased over time, especially at the highest irradiances, where substrata were fastly colonized and mature biofilms developed at all temperatures and flow conditions tested.

High-concentration nitrogen removal coupling with bioelectric power generation by a self-sustaining algal-bacterial biocathode photo-bioelectrochemical system under daily light/dark cycle

High-concentration nitrogen removal coupled with bioelectric power generation in an algal-bacterial biocathode photo-bioelectrochemical system (PBES) was investigated. The PBES can self-sustaining operation with continuous power output under day/night cycle by alternately using photosynthetic dissolved oxygen and nitrate/nitrite as cathodic electron acceptors. The PBES generated a high maximum power of 110mw/m² under illumination and relatively lower power of 40mw/m² under dark. The bioelectricity generation was accompanied by high-concentration nitrogen removal in the algal-bacterial biocathode. The NH₄N was removed completely within 120 h while maximum NO₃N removal efficiency of 86% and maximum total nitrogen removal efficiency of 83% can be reached after 192 h at initial NH₄N concentration of 314 mg/L and NO₃N concentration of 330 mg/L. Combined processes of bioelectrochemical reduction and algal-bacterial interactions provided multiple approaches for nitrogen removal in the biocathode, including nitrifying using photosynthetic oxygen, bioelectrochemical denitrification using the cathode as electron donor, heterotrophic denitrification using photosynthetically produced dissolved organic matters as carbon source and algal-bacterial uptake. Accelerated nitrogen removal with simultaneously improved cathode performance was observed at high concentration of nitrogen and phosphate buffer due to enhanced algal activities for photosynthetic oxygen release and enhanced algal-bacterial interactions for nitrogen transformation. Addition of external organic carbon negatively affected nitrification and decreased cathode potential due to oxygen consumption by aerobic carbon oxidation but enhanced denitrification due to continuous release of high concentration of photosynthetically produced dissolved organic matters by alga. The PBEC was demonstrated as an energy-saving approach for high-strengthen nitrogenous wastewater treatment.

Microbial recycling cells (MRCs): A new platform of microbial electrochemical technologies based on biocompatible materials, aimed at cycling carbon and nutrients in agro-food systems

This article reviews the mechanisms that drive nutrients and carbon sequestration from wastewaters by microbial electrochemical technologies (METs). In this framework, a new generation of METs is also presented (to be called microbial recycling cells, MRCs), based on 100%-recyclable materials (biomass-derived char coal, clay, terracotta, paper, ligno-cellulosic plant materials, etc.), which can act as bio-electrodes, separators and structural frames. In traditional METs architectures (based on technological materials such as carbon cloths, plastic panels, membranes, binders), inorganic salts precipitation and adsorption, as well as biofouling due to organic-matter deposition, are considered as main drawbacks that clog and hinder the systems over relatively short periods. In MRCs, these mechanisms should be maximized, instead of being avoided. In this perspective, both inorganic and organic forms of the main nutrients are sequestered from wastewater and deposited on METs modules. Once the systems become saturated, they can entirely be recycled as agricultural soil conditioners or as base for organic-mineral fertilizers.

The effect of different light intensities and light/dark regimes on the performance of photosynthetic microalgae microbial fuel cell

This study develops a photosynthetic microalgae microbial fuel cell (PMMFC) engaged Chlorella vulgaris microalgae to investigate effect of light intensities and illumination regimes on simultaneous production of bioelectricity, biomass and wastewater treatment. The performance of the system under different light intensity (3500, 5000, 7000 and 10,000 lx) and light/dark regimes (24/00, 12/12, 16/8 h) was investigated. The optimum light intensity and light/dark regimes for achieving maximum yield of PMMFC were obtained. The maximum power density of 126 mW m^-3, the coulombic efficiency of 78% and COD removal of 5.47% were achieved. The maximum biomass concentration of 4 g l^-1 (or biomass yield of 0.44 g l^-1 day^-1) was obtained in continuous light intensity of 10,000 lx. The comparison of the PMMFC performance with air-cathode and abiotic-cathode MFCs shows that the maximum power density of air-cathode MFC was only 13% higher than PMMFC.

Advances in algal-prokaryotic wastewater treatment: A review of nitrogen transformations, reactor configurations and molecular tools

The synergistic activity of algae and prokaryotic microorganisms can be used to improve the efficiency of biological wastewater treatment, particularly with regards to nitrogen removal. For example, algae can provide oxygen through photosynthesis needed for aerobic degradation of organic carbon and nitrification and harvested algal-prokaryotic biomass can be used to produce high value chemicals or biogas. Algal-prokaryotic consortia have been used to treat wastewater in different types of reactors, including waste stabilization ponds, high rate algal ponds and closed photobioreactors. This review addresses the current literature and identifies research gaps related to the following topics: 1) the complex interactions between algae and prokaryotes in wastewater treatment; 2) advances in bioreactor technologies that can achieve high nitrogen removal efficiencies in small reactor volumes, such as algal-prokaryotic biofilm reactors and enhanced algal-prokaryotic treatment systems (EAPS); 3) molecular tools that have expanded our understanding of the activities of algal and prokaryotic communities in wastewater treatment processes.

Nutrient removal and biomass production: advances in microalgal biotechnology for wastewater treatment

Owing to certain drawbacks, such as energy-intensive operations in conventional modes of wastewater treatment (WWT), there has been an extensive search for alternative strategies in treatment technology. Biological modes for treating wastewaters are one of the finest technologies in terms of economy and efficiency. An integrated biological approach with chemical flocculation is being conventionally practiced in several-sewage and effluent treatment plants around the world. Overwhelming responsiveness to treat wastewaters especially by using microalgae is due to their simplest photosynthetic mechanism and ease of acclimation to various habitats. Microalgal technology, also known as phycoremediation, has been in use for WWT since 1950s. Various strategies for the cultivation of microalgae in WWT systems are evolving faster. However, the availability of innovative approaches for maximizing the treatment efficiency, coupled with biomass productivity, remains the major bottleneck for commercialization of microalgal technology. Investment costs and invasive parameters also delimit the use of microalgae in WWT. This review critically discusses the merits and demerits of microalgal cultivation strategies recently developed for maximum pollutant removal as well as biomass productivity. Also, the potential of algal biofilm technology in pollutant removal, and harvesting the microalgal biomass using different techniques have been highlighted. Finally, an economic assessment of the currently available methods has been made to validate microalgal cultivation in wastewater at the commercial level.

Effective algal harvesting by using mesh membrane for enhanced energy recovery in an innovative integrated photobioelectrochemical system

In this work, an innovative design of integrated photobioelectrochemcial system (IPB) and an algal harvesting method based on polyester-mesh membrane (MM) were investigated. The algal growth/harvesting period of 6 days led to the highest surface biomass productivity (SBP) of 0.88 g m^-2 day^-1 and the highest energy generation of 0.157 ± 0.001 kJ day^-1. The harvesting frequency of 3 times in an operational cycle (with three pieces of MM) enhanced the SBP to 1.14 g m^-2 day^-1. The catholyte recirculation for catholyte mixing resulted in a positive net energy production (NEP) of 0.227 ± 0.025 kJ day^-1. Those results have demonstrated the benefits of both using mesh membrane and the new reactor design for algal collection with positive effects on improving IPB performance.