Evaluation of phenotype stability and ecological risk of a genetically engineered alga in open pond production

Horizon scanning of potential environmental applications of terrestrial animals, fish, algae and microorganisms produced by genetic modification, including the use of new genomic techniques

With scientific progress and the development of new genomic techniques (NGTs), the spectrum of organisms modified for various purposes is rapidly expanding and includes a wide range of taxonomic groups. An improved understanding of which newly developed products may be introduced into the market and released into the environment in the near and more distant future is of particular interest for policymakers, regulatory authorities, and risk assessors. To address this information need, we conducted a horizon scanning (HS) of potential environmental applications in four groups of organisms: terrestrial animals (excluding insects and applications with gene drives), fish, algae and microorganisms. We applied a formal scoping review methodology comprising a structured search of the scientific literature followed by eligibility screening, complemented by a survey of grey literature, and regulatory websites and databases. In all four groups of organisms we identified a broad range of potential applications in stages of basic as well as advanced research, and a limited number of applications which are on, or ready to be placed on, the market. Research on GM animals including fish is focused on farmed animals and primarily targets traits which increase performance, influence reproduction, or convey resistance against diseases. GM algae identified in the HS were all unicellular, with more than half of the articles concerning biofuel production. GM algae applications for use in the environment include biocontrol and bioremediation, which are also the main applications identified for GM microorganisms. From a risk assessor's perspective these potential applications entail a multitude of possible pathways to harm. The current limited level of experience and limited amount of available scientific information could constitute a significant challenge in the near future, for which risk assessors and competent authorities urgently need to prepare.

Molecular approaches to enhance astaxanthin biosynthesis; future outlook: engineering of transcription factors in Haematococcus pluvialis

Microalgae are the preferred species for producing astaxanthin because they pose a low toxicity risk than chemical synthesis. Astaxanthin has multiple health benefits and is being used in: medicines, nutraceuticals, cosmetics, and functional foods. Haematococcus pluvialis is a model microalga for astaxanthin biosynthesis; however, its natural astaxanthin content is low. Therefore, it is necessary to develop methods to improve the biosynthesis of astaxanthin to meet industrial demands, making its commercialization cost-effective. Several strategies related to cultivation conditions are employed to enhance the biosynthesis of astaxanthin in H. pluvialis. However, the mechanism of its regulation by transcription factors is unknown. For the first time, this study critically reviewed the studies on identifying transcription factors, progress in H. pluvialis genetic transformation, and use of phytohormones that increase the gene expression related to astaxanthin biosynthesis. In addition, we propose future approaches, including (i) Cloning and characterization of transcription factors, (ii) Transcriptional engineering through overexpression of positive regulators or downregulation/silencing of negative regulators, (iii) Gene editing for enrichment or deletion of transcription factors binding sites, (iv) Hormonal modulation of transcription factors. This review provides considerable knowledge about the molecular regulation of astaxanthin biosynthesis and the existing research gap. Besides, it provides the basis for transcription factors mediated metabolic engineering of astaxanthin biosynthesis in H. pluvialis.

Challenges for the Post-Market Environmental Monitoring in the European Union Imposed by Novel Applications of Genetically Modified and Genome-Edited Organisms

Information on the state of the environment is important to achieve the objectives of the European Green Deal, including the EU's Biodiversity Strategy for 2030. The existing regulatory provisions for genetically modified organisms (GMOs) foresee an obligatory post-market environmental monitoring (PMEM) of potential adverse effects upon release into the environment. So far, GMO monitoring activities have focused on genetically modified crops. With the advent of new genomic techniques (NGT), novel GMO applications are being developed and may be released into a range of different, non-agricultural environments with potential implications for ecosystems and biodiversity. This challenges the current monitoring concepts and requires adaptation of existing monitoring programs to meet monitoring requirements. While the incorporation of existing biodiversity monitoring programs into GMO monitoring at the national level is important, additional monitoring activities will also be required. Using case examples, we highlight that monitoring requirements for novel GMO applications differ from those of GM crop plants previously authorized for commercial use in the European Union.

Seaweed farming: A perspectives of genetic engineering and nano-technology application

In order to meet the growing demand for resources, there is a rising interest in macroalgae cultivation worldwide due to their potential as a source of food, fuel, and bio-products. However, large-scale and sustainable seaweed cultivation has been a persistent challenge. Specific fundamental issues need to be addressed to maximize the benefits of seaweed production. This article reviews a plan for transitioning to an environmentally sustainable aquaculture system incorporating non-toxic nanoparticles. It also provides an overview of genetic enhancement techniques for macroalgae species to realize their potential fully. Additionally, the article discusses the need for advanced tools and concepts to overcome the challenges in seaweed identification and cultivation and emphasizes the importance of a coordinated effort in fundamental and applied research using emerging technologies to ensure long-term practicality.

Solar spectral management for natural photosynthesis: from photonics designs to potential applications

Photosynthesis is the most important biological process on Earth that converts solar energy to chemical energy (biomass) using sunlight as the sole energy source. The yield of photosynthesis is highly sensitive to the intensity and spectral components of light received by the photosynthetic organisms. Therefore, photon engineering has the potential to increase photosynthesis. Spectral conversion materials have been proposed for solar spectral management and widely investigated for photosynthesis by modifying the quality of light reaching the organisms since the 1990s. Such spectral conversion materials manage the photon spectrum of light by a photoconversion process, and a primary challenge faced by these materials is increasing their efficiencies. This review focuses on emerging spectral conversion materials for augmenting the photosynthesis of plants and microalgae, with a special emphasis on their fundamental design and potential applications in both greenhouse settings and microalgae cultivation systems. Finally, a discussion about the future perspectives in this field is made to overcome the remaining challenges.

Biodiversity risk assessment of genetically modified Chaetoceros gracilis for outdoor cultivation

A genetically modified (GM) strain of the diatom Chaetoceros gracilis expressing the phosphite dehydrogenase gene (ptxD), which is a useful gene both for the biological containment and the avoidance of microbial contamination, was characterized to estimate the risk against the biodiversity by laboratory experiments. GM strain could grow in the medium containing phosphite as a sole source of phosphorus, while its general characteristics such as growth, salt tolerance, heat and dehydration resistance in the normal phosphate-containing medium were equivalent to those of wild type (WT) strain. The increase in potential toxicity of GM strain against plant, crustacean, fish and mammal was also disproved. The dispersal ability of WT strain cultured in an outdoor raceway pond was investigated for 28 days by detecting the psb31 gene in vessels, settled at variable distances (between 5 and 60 m) from the pond. The diatom was detected only in one vessel placed 5 m apart. To estimate the influence on the environment, WT and GM strains were inoculated into freshwater, seawater and soil. The influence on the microbiome in those samples was assessed by 16S rRNA gene amplicon sequencing, in addition to the analysis of the survivability of those strains in the freshwater and the seawater. The results indicated that the effect to the microbiome and the survivability were comparable between WT and GM strains. All results showed that the introduction of the ptxD gene into the diatom had a low risk on biodiversity.

Biocontainment of Genetically Engineered Algae

Algae (including eukaryotic microalgae and cyanobacteria) have been genetically engineered to convert light and carbon dioxide to many industrially and commercially relevant chemicals including biofuels, materials, and nutritional products. At industrial scale, genetically engineered algae may be cultivated outdoors in open ponds or in closed photobioreactors. In either case, industry would need to address a potential risk of the release of the engineered algae into the natural environment, resulting in potential negative impacts to the environment. Genetic biocontainment strategies are therefore under development to reduce the probability that these engineered bacteria can survive outside of the laboratory or industrial setting. These include active strategies that aim to kill the escaped cells by expression of toxic proteins, and passive strategies that use knockouts of native genes to reduce fitness outside of the controlled environment of labs and industrial cultivation systems. Several biocontainment strategies have demonstrated escape frequencies below detection limits. However, they have typically done so in carefully controlled experiments which may fail to capture mechanisms of escape that may arise in the more complex natural environment. The selection of biocontainment strategies that can effectively kill cells outside the lab, while maintaining maximum productivity inside the lab and without the need for relatively expensive chemicals will benefit from further attention.

Augmented CO2 tolerance by expressing a single H+-pump enables microalgal valorization of industrial flue gas

Microalgae can accumulate various carbon-neutral products, but their real-world applications are hindered by their CO2 susceptibility. Herein, the transcriptomic changes in a model microalga, Chlamydomonas reinhardtii, in a high-CO2 milieu (20%) are evaluated. The primary toxicity mechanism consists of aberrantly low expression of plasma membrane H+-ATPases (PMAs) accompanied by intracellular acidification. Our results demonstrate that the expression of a universally expressible PMA in wild-type strains makes them capable of not only thriving in acidity levels that they usually cannot survive but also exhibiting 3.2-fold increased photoautotrophic production against high CO2 via maintenance of a higher cytoplasmic pH. A proof-of-concept experiment involving cultivation with toxic flue gas (13 vol% CO2, 20 ppm NOX, and 32 ppm SOX) shows that the production of CO2-based bioproducts by the strain is doubled compared with that by the wild-type, implying that this strategy potentially enables the microalgal valorization of CO2 in industrial exhaust.

Enhanced lipid accumulation in microalgae through nanoparticle-mediated approach, for biodiesel production: A mini-review

Nanoparticle application in microalgae for enhanced lipid production is an ongoing work that leads towards the contribution in biodiesel production. During this decade, metal nanoparticles are constantly being reported to have numerous applications in diverse fields, because of their unique optical, electrical, and magnetic properties. They can interact with the biomolecules of cells and thereby alters cellular metabolisms, which in turn reflects their ability to regulate some primary or secondary metabolic pathways. Nanoparticles derived from metals like Fe, Cu, and Se are taking part in redox processes and their presence in many enzymes may modulate algal metabolisms. Besides by upregulating or downregulating the expression of several genes, nanoparticle exposure can alter gene expressions in many organisms. In microalgae such as Chlorella vulgaris, C. pyrenoidosa, Scenedesmus obliquus, S. rubescens, Trachydiscus minut u s, Parachlorella kessleri, and Tetraselmis suecica; metal nanoparticle exposure in different environmental conditions have impacts on various physiological or molecular changes, thereby increasing the growth rate, biomass and lipid production. The present mini-review gives an insight into the various advantages and a future outlook on the application of nanoparticles in microalgae for biofuel production. Also, it can be proposed that nanoparticles could be useful in blocking or deactivating the AGPase enzyme (involved in the glucose to starch conversion pathway), binding to its active site, thereby increasing lipid production in microalgae that could be utilized for enhanced biodiesel production.

Publishing Environmental Assessment and Management Science: Crossing the Hurdles

Benefits accrue to scientists, resource managers, companies, and policymakers when environmental scientists publish in peer-reviewed journals. However, environmental scientists and practitioners face challenges, including the sometimes low value placed on journal articles, institutional vested interests in outcomes, and the changing priorities of employers and project sponsors. Confidentiality agreements can also lead scientists to assume publication is not an option. Case studies may be viewed by potential authors as too routine for peer-reviewed journals. On the basis of 30 years of experience, we suggest that publishing hurdles can be overcome and that environmental scientists have a range of options. The topics of manuscripts can include not only results from case studies and perspectives based on them but also byproducts of assessments, including definitions, plans, monitoring methods and models, and decision frameworks. Environmental scientists have unique opportunities to move science forward with their practical knowledge if they can move across the institutional, logistical, data-related, and content-related hurdles.

Enhancement of Acid Protease Activity of Aspergillus oryzae Using Atmospheric and Room Temperature Plasma

Atmospheric and room temperature plasma (ARTP) system is a novel and efficient mutagenesis protocol for microbial breeding. In this study, ARTP was employed to treat spores of Aspergillus oryzae strain 3.042 for selection of high acid protease producers. With an irradiation time of 150 s at the lethal rate of 90%, 19 mutants with higher acid protease activity were initially selected based on different mutant colony morphology and ratio of the clarification halo of protease activity to the colony diameter. Measurements of the acid protease activity revealed that mutant strain B-2 is characterized by a steady hereditary stability with increased acid protease, neutral protease and total protease activities of 54.7, 17.3, and 8.5%, respectively, and decreased alkaline protease activity of 8.1%. In summary, the identified mutant strain B-2 exhibits great potential for the enhancement of the insufficient acid protease activity during the middle and later stages of soy sauce fermentation.

Emerging Technologies in Algal Biotechnology: Toward the Establishment of a Sustainable, Algae-Based Bioeconomy

Mankind has recognized the value of land plants as renewable sources of food, medicine, and materials for millennia. Throughout human history, agricultural methods were continuously modified and improved to meet the changing needs of civilization. Today, our rapidly growing population requires further innovation to address the practical limitations and serious environmental concerns associated with current industrial and agricultural practices. Microalgae are a diverse group of unicellular photosynthetic organisms that are emerging as next-generation resources with the potential to address urgent industrial and agricultural demands. The extensive biological diversity of algae can be leveraged to produce a wealth of valuable bioproducts, either naturally or via genetic manipulation. Microalgae additionally possess a set of intrinsic advantages, such as low production costs, no requirement for arable land, and the capacity to grow rapidly in both large-scale outdoor systems and scalable, fully contained photobioreactors. Here, we review technical advancements, novel fields of application, and products in the field of algal biotechnology to illustrate how algae could present high-tech, low-cost, and environmentally friendly solutions to many current and future needs of our society. We discuss how emerging technologies such as synthetic biology, high-throughput phenomics, and the application of internet of things (IoT) automation to algal manufacturing technology can advance the understanding of algal biology and, ultimately, drive the establishment of an algal-based bioeconomy.

Metabolic engineering of phosphite metabolism in Synechococcus elongatus PCC 7942 as an effective measure to control biological contaminants in outdoor raceway ponds

BACKGROUND

The use of cyanobacteria and microalgae as cell factories to produce biofuels and added-value bioproducts has received great attention during the last two decades. Important investments have been made by public and private sectors to develop this field. However, it has been a challenge to develop a viable and cost-effective platform for cultivation of cyanobacteria and microalgae under outdoor conditions. Dealing with contamination caused by bacteria, weedy algae/cyanobacteria and other organisms is a major constraint to establish effective cultivation processes.

RESULTS

Here, we describe the implementation in the cyanobacterium Synechococcus elongatus PCC 7942 of a phosphorus selective nutrition system to control biological contamination during cultivation. The system is based on metabolic engineering of S. elongatus to metabolize phosphite, a phosphorus source not normally metabolized by most organisms, by expressing a bacterial phosphite oxidoreductase (PtxD). Engineered S. elongatus strains expressing PtxD grow at a similar rate on media supplemented with phosphite as the non-transformed control supplemented with phosphate. We show that when grown in media containing phosphite as the sole phosphorus source in glass flasks, the engineered strain was able to grow and outcompete biological contaminants even when the system was intentionally inoculated with natural competitors isolated from an irrigation canal. The PtxD/phosphite system was successfully used for outdoor cultivation of engineered S. elongatus in 100-L cylindrical reactors and 1000-L raceway ponds, under non-axenic conditions and without the need of sterilizing containers and media. Finally, we also show that the PtxD/phosphite system can be used as selectable marker for S. elongatus PCC 7942 transgenic strains selection, eliminating the need of antibiotic resistance genes.

CONCLUSIONS

Our results suggest that the PtxD/phosphite system is a stable and sufficiently robust strategy to control biological contaminants without the need of sterilization or other complex aseptic procedures. Our data show that the PtxD/phosphite system can be used as selectable marker and allows production of the cyanobacterium S. elongatus PCC 7942 in non-axenic outdoor reactors at lower cost, which in principle should be applicable to other cyanobacteria and microalgae engineered to metabolize phosphite.

Investigations in ultrasonic enhancement of β-carotene production by isolated microalgal strain Tetradesmus obliquus SGM19

Microalgae constitute relatively novel source of lipids for biodiesel production. The economy of this process can be enhanced by the recovery of β-carotenes present in the microalgal cells. The present study has addressed matter of enhancement of lipids and β-carotene production by microalgal species of Tetradesmus obliquus SGM19 with the application of sonication. As first step, the growth cycle of Tetradesmus obliquus SGM19 was optimized using statistical experimental design. Optimum parameters influencing microalgal growth were: Sodium nitrate = 1.5 g/L, ethylene diamine tetraacetic acid = 0.001 g/L, temperature = 28.5 °C, pH = 7.5, light intensity = 5120 lux, β-carotene yield = 0.67 mg/g DCW. Application of 33 kHz and 1.4 bar ultrasound at 10% duty cycle was revealed to enhance the lipid and β-carotene yields by 34.5% and 31.5%, respectively. Kinetic analysis of substrate and product profiles in control and test experiments revealed both lipid and β-carotene to be growth-associated products. The intracellular NAD(H) content during late log phase was monitored in control and test experiments as a measure of relative kinetics of intracellular metabolism. Consistently higher NAD(H) concentrations were observed for test experiments; indicating faster metabolism. Finally, the viability of ultrasound-exposed microalgal cells (assessed with flow cytometry) was >80%.

Phytosterol biosynthesis and production by diatoms (Bacillariophyceae)

Diatoms are abundant unicellular marine photosynthetic algae that have genetically diversified their physiology and metabolism while adapting to numerous environments. The metabolic repertoire of diatoms presents opportunities to characterise the biosynthesis and production of new and potentially valuable microalgal compounds, including sterols. Sterols of plant origin, known as phytosterols, have been studied for health benefits including demonstrated cholesterol-lowering properties. In this review we summarise sterol diversity, the unique metabolic features of sterol biosynthesis in diatoms, and prospects for the extraction of diatom phytosterols in comparison to existing sources. We also review biotechnological efforts to manipulate diatom biosynthesis, including culture conditions and avenues for the rational engineering of metabolism and cellular regulation.

Marine Natural Products from Microalgae: An -Omics Overview

Over the last decade, genome sequences and other -omics datasets have been produced for a wide range of microalgae, and several others are on the way. Marine microalgae possess distinct and unique metabolic pathways, and can potentially produce specific secondary metabolites with biological activity (e.g., antipredator, allelopathic, antiproliferative, cytotoxic, anticancer, photoprotective, as well as anti-infective and antifouling activities). Because microalgae are very diverse, and adapted to a broad variety of environmental conditions, the chances to find novel and unexplored bioactive metabolites with properties of interest for biotechnological and biomedical applications are high. This review presents a comprehensive overview of the current efforts and of the available solutions to produce, explore and exploit -omics datasets, with the aim of identifying species and strains with the highest potential for the identification of novel marine natural products. In addition, funding efforts for the implementation of marine microalgal -omics resources and future perspectives are presented as well.

Gene Editing of Microalgae: Scientific Progress and Regulatory Challenges in Europe

It is abundantly clear that the development of gene editing technologies, represents a potentially powerful force for good with regard to human and animal health and addressing the challenges we continue to face in a growing global population. This now includes the development of approaches to modify microalgal strains for potential improvements in productivity, robustness, harvestability, processability, nutritional composition, and application. The rapid emergence and ongoing developments in this area demand a timely review and revision of the current definitions and regulations around genetically modified organisms (GMOs), particularly within Europe. Current practices within the EU provide exemptions from the GMO directives for organisms, including crop plants and micro-organisms that are produced through chemical or UV/radiation mutagenesis. However, organisms generated through gene editing, including microalgae, where only genetic changes in native genes are made, remain currently under the GMO umbrella; they are, as such, excluded from practical and commercial opportunities in the EU. In this review, we will review the advances that are being made in the area of gene editing in microalgae and the impact of regulation on commercial advances in this area with consideration to the current regulatory framework as it relates to GMOs including GM microalgae in Europe.

Environmental building policy by the use of microalgae and decreasing of risks for Canadian oil sand sector development

Environmental building recommendations aimed towards new environmental policies and management-changing decisions which as example demonstrated in consideration of the problems of Canadian oil sands operators. For the implementation of the circular economic strategy, we use an in-depth analysis of reported environmental after-consequence on all stages of the production process. The study addressed the promotion of innovative solutions for greenhouse gas emission, waste mitigation, and risk of falling in oil prices for operators of oil sands with creating market opportunities. They include the addition of microalgae biomass in tailings ponds for improvement of the microbial balance for the water speedily cleaning, recycling, and reusing with mitigation of GHG emissions. The use of food scraps for the nutrition of microalgae will reduce greenhouse gas emission minimally, on 0.33 MtCO₂eq for Alberta and 2.63 MtCO₂eq/year for Canada. Microalgae-derived biofuel can reduce this emission for Alberta on 11.9-17.9 MtCO₂eq and for Canada on 71-106 MtCO₂eq/year, and the manufacturing of other products will adsorb up to 135.6 MtCO₂ and produce 99.2 MtO₂. The development of the Live Conserve Industry and principal step from non-efficient protection of the environment to its cultivation in a large scale with mitigation of GHG emission and waste as well as generating of O₂ and value-added products by the use of microalgae opens an important shift towards a new design and building of a biological system.