Wastewater and waste CO2 for sustainable biofuels from microalgae

A comprehensive review on effective parameters on microalgae productivity and carbon capture rate

Rising carbon emissions caused by population growth and industrialization is a significant environmental challenge in various countries. To combat this issue, Renewable Energy (RE) and Carbon Capture and Storage (CCS) technologies should be commercialized to reduce Greenhouse Gas (GHG) emissions and generate carbon-free energy. One such technology is the use of microalgae, which can directly capture CO2 from the air through photosynthesis and potentially produce biofuels due to their high energy content. However, the carbon capture rate of microalgae varies globally due to numerous parameters and variables affecting microalgae productivity. Additionally, microalgae productivity and carbon capture formulas yield different results worldwide, especially in outdoor industrial-scale cultivation. This research aims to comprehensively review the effective variables and parameters in carbon capture by microalgae based on microalgae productivity and carbon capture formulas. The research also ranked countries based on CO2 production in four different categories to determine whether the biggest carbon producer countries could exhibit suitable weather conditions for microalgae cultivation. Findings reveal optimal ranges of critical variables in the microalgae growth formula, including temperature, solar radiation intensity, Photon Flux Density (PFD), and sunlight duration. The study also analyzes microalgae cultivation, carbon capture, and oxygen production formula in different systems such as Open Ponds (OP), Tubular Photobioreactors (TPBR), and Flat Plate Photobioreactors (FPPBR), while discussing other influential parameters. In conclusion, emphasizing the adjustment and utilization of optimal values of effective parameters in microalgae cultivation not only holds promise for future carbon capture by microalgae but also pushes human beings toward sustainable development goals.

Life cycle assessment of integrated microalgae oil production in Bojongsoang Wastewater Treatment Plant, Indonesia

This study aims to determine the eco-friendliness of microalgae-based renewable energy production in several scenarios based on life cycle assessment (LCA). The LCA provides critical data for sustainable decision-making and energy requirement analysis, including net energy ratio (NER) and cumulative energy demand (CED). The Centrum voor Milieuwetenschappen Leiden (CML) IA-Baseline was used on environmental impact assessment method by SimaPro v9.3.0.3® software and energy analysis of biofuel production using native polyculture microalgae biomass in municipal wastewater treatment plants (WWTP) Bojongsoang, Bandung, Indonesia. The study was analyzed under three scenarios: (1) the current scenario; (2) the algae scenario without waste heat and carbon dioxide (CO2); and (3) the algae scenario with waste heat and carbon dioxide (CO2). Waste heat and CO2 were obtained from an industrial zone near the WWTP. The results disclosed that the microalgae scenario with waste heat and CO2 utilization is the most promising scenario with the lowest environmental impact (- 0.139 kg CO2eq/MJ), positive energy balance of 1.23 MJ/m3 wastewater (NER > 1), and lower CED value across various impact categories. It indicates that utilizing the waste heat and CO2 has a positive impact on energy efficiency. Based on the environmental impact, NER and CED values, this study suggests that the microalgae scenario with waste heat and CO2 is more feasible and sustainable to adopt and could be implemented at the Bojongsoang WWTP.

Feasibility of bioplastic production using micro- and macroalgae- A review

Plastic disposal and their degraded products in the environment are global concern due to its adverse effects and persistence in nature. To overcome plastic pollution and its impacts on environment, a sustainable bioplastic production using renewable feedstock's, such as algae, are envisioned. In this review, the production of polymer precursors such as polylactic acid, polyhydroxybutyrates, polyhydroxyalkanoates, agar, carrageenan and alginate from microalgae and macroalgae through direct conversion and fermentation routes are summarized and discussed. The direct conversion of algal biopolymers without any bioprocess (whole algal biomass used emphasizing zero waste discharge concept) favours economic feasibility. Whereas indirect method uses conversion of algal polymers to monomers after pretreatment followed by bioplastic precursor production by fermentation are emphasized. This review paper also outlines the current state of technological developments in the field of algae-based bioplastic, both in industry and in research, and highlights the creation of novel solutions for green bioplastic production employing algal polymers. Finally, the cost economics of the bioplastic production using algal biopolymers are clearly mentioned with future directions of next level bioplastic production. In this review study, the cost estimation was given at laboratory level bioplastic production using casting methods. Further development of bioplastics at pilot scale level may give clear economic feasibility of production at industry. Here, in this review, we emphasized the overview of algal biopolymers for different bioplastic product development and its economic value and also current industries involved in bioplastic production.

Valorization of wastewater: A paradigm shift towards circular bioeconomy and sustainability

Limitation in the availability of natural resources like water is the main drive for focussing on resource recovery from wastewater. Rapid urbanization with increased consumption of natural resources has severely affected its management and security. The application of biotechnological processes offers a feasible approach to concentrating and transforming wastewater for resource recovery and a step towards a circular economy. Wastewater generally contains high organic materials, nutrients, metals and chemicals, which have economic value. Hence, its management can be a valuable resource through the implementation of a paradigm transformation for value-added product recovery. This review focuses on the circular economy of "close loop" process by wastewater reuse and energy recovery identifying the emerging technologies for recovering resources across the wastewater treatment phase. Conventional wastewater treatment technologies have been discussed along with the advanced treatment technologies such as algal treatment, anammox technology, microbial fuel cells (MFC). Apart from recovering energy in the form of biogas and biohydrogen, second and third-generation biofuels as well as biohythane and electricity generation have been deliberated. Other options for resource recovery are single-cell protein (SCP), biopolymers as well as recovery of metals and nutrients. The paper also highlights the applications of treated wastewater in agriculture, aquaponics, fisheries and algal cultivation. The concept of Partitions-release-recover (PRR) has been discussed for a better understanding of the filtration treatment coupled with anaerobic digestion. The review provides a critical evaluation on the importance of adopting a circular economy and their role in achieving sustainable development goals (SDGs). Thus, it is imperative that such initiatives towards resource recovery from wastewater through integration of concepts can aid in providing wastewater treatment system with resource efficiency.

Agro-industrial wastewater-grown microalgae: A techno-environmental assessment of open and closed systems

Microalgae-based treatment can be applied to the bioremediation of agro-industrial wastewater, aiming at a circular economy approach. The present work compared the technical-environmental feasibility of operating a bubble column photobioreactor (PBR) and a high rate pond (HRP) for microalgae biomass production and wastewater treatment of a meat processing facility. The comparison was made regarding biomass productivity, phytoplankton composition, treatment efficiency, life cycle assessment, and energy balance. The daily yields of total biomass and the maximum specific growth rates were 483.33 mg L^-1 d^-1 and 0.23 d^-1 for PBR and 95.00 mg L^-1·d^-1 and 0.193 d^-1 for HRP, respectively, with a predominance of the species Scenedesmus acutus. The treatment efficiency of COD (~50%) and phosphorus (100%) were similar in the two reactors. However, the PBR showed greater assimilation of ammoniacal nitrogen (100% removal) due to the higher microalgal biomass productivity. Environmental impacts were assessed through the ReCiPe methodology for midpoint and endpoint levels. Results revealed that CO₂ supply was the most impactful process for both systems (>60%), but HRP reached lower environmental burdens (-105.90 mPt) than PBR (60.74 mPt). Energy balance through the Net Energy Ratio also resulted in the HPR advantage over the PBR (NER = 14.23 and 1.09, respectively). Still, both reactors present advantages when applied to different valorization routes. At the same time, both present room for improvement in the light of bioeconomy and biorefineries, aiming at sustainable wastewater treatment plants.

North by Southwest: Screening the Naturally Isolated Microalgal Strains from Different Habitats of Iran for Various Pharmaceutical and Biotechnology Applications

Background and Aims

Microalgae are known as a promising source for food, pharmaceutical, and biofuel production while providing environmental advantages. The present study evaluates some newly isolated microalgal strains from north and southwest of Iran as a potential source for high-value products.

Methods

Primitive screening was carried out regarding growth parameters. The molecular and morphological identifications of the selected strains were performed using 18S rRNA gene sequencing. After phylogenic and evolutionary studies, the selected microalgal strains were characterized in terms of protein and pigment content, in addition to the fatty acid profile content. Besides, the CO₂ fixation rate was determined to assess capability for various environmental applications.

Results

All of the selected strains were predominantly belonging to Scenedesmus sp. and Desmodesmus sp. The isolated Scenedesmus sp. VN 009 possessed the highest productivity content and CO₂ fixation rate of 0.054 g·L⁻¹d⁻¹ and 0.1 g·L⁻¹d⁻¹, respectively. Moreover, data from GC/MS analysis demonstrated the high robustness of this strain to produce several valuable fatty acids including α-linolenic acid and linoleic acid in 45% and 20% of total fatty acids.

Conclusions

The identified strains have a great but different potential for SCP, β-carotene, and ω-3 production, as well as CO₂ fixation for environmental purposes. In this study, considering the wide range of microalgal strains in different habitats of Iran, the potential applications of native microalgae for various pharmaceutical, food, and biotechnology purposes were investigated.

Emerging Trends in Sustainable CO2 -Management Materials

With the rising level of atmospheric CO₂ worsening climate change, a promising global movement toward carbon neutrality is forming. Sustainable CO₂ management based on carbon capture and utilization (CCU) has garnered considerable interest due to its critical role in resolving emission-control and energy-supply challenges. Here, a comprehensive review is presented that summarizes the state-of-the-art progress in developing promising materials for sustainable CO₂ management in terms of not only capture, catalytic conversion (thermochemistry, electrochemistry, photochemistry, and possible combinations), and direct utilization, but also emerging integrated capture and in situ conversion as well as artificial-intelligence-driven smart material study. In particular, insights that span multiple scopes of material research are offered, ranging from mechanistic comprehension of reactions, rational design and precise manipulation of key materials (e.g., carbon nanomaterials, metal-organic frameworks, covalent organic frameworks, zeolites, ionic liquids), to industrial implementation. This review concludes with a summary and new perspectives, especially from multiple aspects of society, which summarizes major difficulties and future potential for implementing advanced materials and technologies in sustainable CO₂ management. This work may serve as a guideline and road map for developing CCU material systems, benefiting both scientists and engineers working in this growing and potentially game-changing area.

Recent advances, current issues and future prospects of bioenergy production: A review

With the immense potential of bioenergy to drive carbon neutrality and achieve the climate targets of the Paris Agreement, this paper aims to present the recent advances in bioenergy production as well as their limitations. The novelty of this review is that it covers a comprehensive range of strategies in bioenergy production and it provides the future prospects for improvement. This paper reviewed more than 200 peer-reviewed scholarly papers mainly published between 2010 and 2021. Bioenergy is derived from biomass, which, through thermochemical and biochemical processes, is converted into various forms of biofuels. This paper reveals that bioenergy production is temperature-dependent and thermochemical processes currently have the advantage of higher efficiency over biochemical processes in terms of lower response time and higher conversion. However, biochemical processes produce more volatile organic compounds and have lower energy and temperature requirements. The combination of the two processes could fill the shortcomings of a single process. The choices of feedstock are diverse as well. In the future, it can be anticipated that continuous technological development to enhance the commercial viability of different processes, as well as approaches of ensuring their sustainability, will be among the main aspects to be studied in greater detail.

Advances in microalgal research for valorization of industrial wastewater

This review article focuses on recent updates on remediation of industrial wastewater (IWW) through microalgae cultivation. These include how adding additional supplements of nutrient to some specific IWWs lacking adequate nutrients improving the microalgae growth and remediation simultaneously. Various pretreatments strategy recently employed for IWWs treatment other than dealing with microalgae was discussed. Various nutrient-rich IWW could be utilized directly with additional dilution, supplement of nutrients and without any pretreatment. Recent advances in various approaches and new tools used for cultivation of microalgae on IWW such as two-step cultivation, pre-acclimatization, novel microalgal-bioelectrical systems, integrated catalytic intense pulse-light process, sequencing batch reactor, use of old stabilized algal-bacterial consortium, immobilized microalgae cells, microalgal bacterial membrane photobioreactor, low-intensity magnetic field, BIO_ALGAE simulation tool, etc. are discussed. In addition, biorefinery of microalgal biomass grown on IWW and its end-use applications are reviewed.

Insights into the potential impact of algae-mediated wastewater beneficiation for the circular bioeconomy: A global perspective

Algae-based technologies are one of the emerging solutions to societal issues such as accessibility to clean water and carbon-neutral energy and are a contender for the circular bioeconomy. In this review, recent developments in the use of different algal species for nutrient recovery and biomass production in wastewater, challenges, and future perspectives have been addressed. The ratio and bioavailability of nutrients in wastewater are vital parameters, which significantly impact nutrient recovery efficiency and algal biomass production. However, the optimum nutrient concentration and ratio may vary depending upon the microalgal species as well as cultivation conditions. The use of indigenous algae and algae-based consortia with other microorganisms has been proved promising in improving nutrient recovery efficiency and biomass production in pilot scale operations. However, environmental and cultivation conditions also play a significant role in determining the feasibility of the process. This review further focused on the assessment of the potential benefits of algal biomass production, renewable biofuel generation, and CO₂ sequestration using wastewater in different countries on the basis of available data on wastewater generation and estimated nutrient contents. It was estimated that 5-10% replacement of fossil crude requirement with algal biofuels would require ~952-1903 billion m³ of water, 10-21 billion tons of nitrogen, and 2-4 billion tons of phosphorus fertilizers. In this context, coupling wastewater treatment and algal biomass production seem to be the most sustainable option with potential global benefits of polishing wastewater through nutrients recycling and carbon dioxide sequestration.

Life cycle assessment of hetero- and phototrophic as well as combined cultivations of Galdieria sulphuraria

Microalgae cultivation for food purposes could have high environmental impacts. The study performed life cycle assessment (LCA) of hypothetical model combining phototrophic and heterotrophic cultivations, exchanging produced gases (carbon dioxide from heterotrophic and oxygen from autotrophic) as a potential strategy to reduce the environmental impact of microalgae cultivation. The LCA indicated that the production of Galdieria sulphuraria in a combined cultivation system has environmental benefits compared with the separate phototrophic cultivation and an almost twice lower carbon footprint than phototrophic cultivation. The benefits are based on the lower volume of culture broth and consequently reduced energy demand as well as less demanding wastewater treatment of the heterotrophic cultivation. Such combination of cultivation activities could be recommended to the producers dealing with phototrophic cultivation as a sustainable strategy for the environmental impact reduction.

Life Cycle Assessment of Biofuels

Life cycle assessment (LCA) assesses the environmental burdens or impacts of products from cradle to grave. It is also possible to assess such burdens or impacts for parts of the life cycle. A brief overview is given of LCA methodology. A number of choices have to be made in the goal and scope definition, inventory analysis, and impact assessment stages of life cycle assessments. Such choices can have substantial impacts on LCA outcomes. There are uncertainties in outcomes linked to inventory data and modeling. In the case that future biofuels and production processes are studied, assessment outcomes are characterized by relatively large uncertainties. Choices and uncertainties should be considered in the interpretation stage of life cycle assessments. Methodologies applied to several important environmentally relevant aspects of biofuel life cycles are discussed. These aspects are: emissions of substances impacting climate, depletion of virtually nonrenewable abiotic resources, primary energy demand, and water footprint. LCA can be useful in identifying life cycle stages and processes that are major contributors to environmental burdens, for determining the energetic return on energy invested in biofuels, for the identification of environmental trade-offs, and for comparing the life cycle environmental burdens of products.

Review on integrated biofuel production from microalgal biomass through the outset of transesterification route: a cascade approach for sustainable bioenergy

In recent years, microalgal feedstocks have gained immense potential for sustainable biofuel production. Thermochemical, biochemical conversions and transesterification processes are employed for biofuel production. Especially, the transesterification process of lipid molecules to fatty acid alkyl esters (FAAE) is being widely employed for biodiesel production. In the case of the extractive transesterification process, biodiesel is produced from the extracted microalgal oil. Whereas In-situ (reactive) transesterification allows the direct conversion of microalgae to biodiesel avoiding the sequential steps, which subsequently reduces the production cost. Though microalgae have the highest potential to be an alternate renewable feedstock, the minimization of biofuel production cost is still a challenge. The biorefinery approaches that rely on simple cascade processes involving cost-effective technologies are the need of an hour for sustainable bioenergy production using microalgae. At the same time, combining the biorefineries for both (i) high value-low volume (food and health supplements) and (ii) low value- high volume (waste remediation, bioenergy) from microalgae involves regulatory and technical problems. Waste-remediation and algal biorefinery were extensively reviewed in many previous reports. On the other hand, this review focuses on the cascade processes for efficient utilization of microalgae for integrated bioenergy production through the transesterification. Microalgal biomass remnants after the transesterification process, comprising carbohydrates as a major component (process flow A) or the carbohydrate fraction after bio-separation of pretreated microalgae (process flow B) can be utilized for bioethanol production. Therefore, this review concentrates on the cascade flow of integrated bioprocessing methods for biodiesel and bioethanol production through the transesterification and biochemical routes. The review also sheds light on the recent combinatorial approaches of transesterification of microalgae. The applicability of spent microalgal biomass residue for biogas and other applications to bring about zero-waste residue are discussed. Furthermore, techno-economic analysis (TEA), life cycle assessment (LCA) and challenges of microalgal biorefineries are discussed.

Symbiotic integration of bioprocesses to design a self-sustainable life supporting ecosystem in a circular economy framework

Climate change, resource depletion and unsustainable crop productivity are major challenges that mankind is currently facing. Natural ecosystems of earth's biosphere are becoming vulnerable and there is a need to design Bioregenerative Life Support Systems (BLSS) which are ecologically engineered microcosms that could effectively deal with problems associated with urbanization and industrialization in a sustainable manner. The principles of BLSS could be integrated with waste fed biorefineries and solar energy to create a self-sustainable bioregenerative ecosystem (SSBE). Such engineered ecosystems will have potential to fulfil urban life essentials and climate change mitigation thus generating ecologically smart and resilient communities which can strengthen the global economy. This article provides a detailed overview on SSBE framework and its improvement in the contemporary era to achieve circular bioeconomy by means of effective resource recycling.

Integration of a side-stream microalgae process into a municipal wastewater treatment plant: A life cycle analysis

This study investigates the environmental improvements associated to the integration of a microalgae unit as a side-stream process within an existing municipal wastewater treatment facility in northern Italy. Microalgae are fed on the centrate from sludge dewatering, rich in nutrients, and on the CO₂ in the flue-gas of the combined heat and power unit. The produced biomass is recirculated upflow the water line where it settles and undergoes anaerobic digestion generating extra biogas. A life cycle assessment was performed collecting primary data from an algal pilot-scale plant installed at the facility. Fifteen environmental indicators were evaluated. Compared to the baseline wastewater treatment, the new algal configuration allows an improvement for 7 out of 15 indicators mainly thanks to the electricity savings in the facility. Some recommendations are provided to improve the performance of the algal system in the scaling up.

Utilization of domestic wastewater as a water source of Tetradesmusobliquus PF3 for the biological removal of nitric oxide

The reduction of nitrogen oxide (DeNOx) from flue gas by microalgae is a promising technology that has attracted increasing attention. Because the water source is a major limitation of microalgae application in the DeNOx from flue gas, we investigated the feasibility of using domestic wastewater (WW) as a water source. As a result, a biomass accumulation rate of 0.27 ± 0.01 mg L^-1 d^-1 was achieved by Tetradesmusobliquus PF3 cultivated in WW for 8 d, and 30 mg L^-1 of nitrate nitrogen was added to the WW to fulfill the nutrient requirements of the microalgae cells. The ammonium (NH₄⁺) nitrogen present in WW exerted inhibitory effects on the removal of nitric oxide (NO), thereby leading to 8% decrease removal efficiency in comparison with that using clean water and nutrients (BG11 medium). However, these inhibitory effects disappeared following the exhaustion of NH₄⁺ by T. obliquus PF3 after 1 d. To overcome the inhibition of NH₄⁺ and to achieve a high NO removal efficiency, a strategy of connecting two reactors in series was presented. The removal efficiency of NO by the two series reactors reached up to 71.2 ± 2.9%, which was significantly higher than that obtained by a single reactor (43.1 ± 3.6%). In addition, 70.9 ± 4.8% of the supplied NO was fixed into microalgae cells in the two reactors, which was 1.75 times higher than that in the single reactor (40.6 ± 5.1%), thereby suggesting that connecting two reactors in series rendered effective recovery of NO from flue gas using WW as a water source. In this study, we provided an economically viable water source for the application of microalgae in the biological DeNOx from flue gases.

Salinization and wastewater effects on the growth and some cell contents of Scenedesmus bijugatus

The aim of this study is to determine the effect of salinization and wastewater stresses on the growth, some cellular contents (total soluble proteins, total soluble carbohydrates, nucleic acids, and amino acids composition) and ultrastructure using TEM of unicellular green alga Scenedesmus bijugatus. Treatment of S. bijugatus by NaCl at 10 and 50 mg L-1 significantly increased the growth of this alga and its cellular macro-molecules. While, treatment above this concentration with NaCl significantly inhibited the growth and cellular macro-molecules. On the other hand, treatment by NaCl at the pre-lethal concentration (300 mg L-1) had different effects on its detected amino acids. Whereas, Asp. Acid, Pro, Cys, Val, Iso-leu, leu, Phe.ala and Lys were slightly stimulated with salinization treatment. On contrast the levels of amino acids: Thr, Ser, Glu.acid, Gly, Ala, Mth, His and Arg were markedly inhibited. Ultrastructure examination of treated S. bijugatus by 300 mg L-1 of NaCl for 8 days showed increase of starch granules, shrinkage of cell contents and thickening of cell wall. The recorded data indicated also that treatment by wastewater with all concentrations led to stimulatory effects on their growth and cellular macro-molecules except at 100% wastewater which had inhibitory effects on Asp., Gly., Thr., Ser., Pro., Glu., Ala., Meth., and Cyst., of S. bijugatus. Also, wastewater induced a slight change in the treated S. bijugatus as elevation in starch granules and presence of thylakoid membranes although not clear as in the control.

Sustainable energy from waste organic matters via efficient microbial processes

This review emphasizes utilization of waste organic matters from water bodies and soil sources for sustainable energy development. These organic waste matters (including microplastics) from a variety of environmental sources have created a big challenge to utilize them for energy development for human needs, maintaining a cleaner environment and thereby, producing useful bioproducts (sustainable bioenergy or other primary metabolites). Anaerobic digestions as well as other effective wastewater treatment approaches are discussed. From the water bodies, waste organic matter reduction can be achieved by a reduction of chemical oxygen demand and biological oxygen demand after the waste treatment. Other forms of organic waste matter are available in the form of agro wastes or residues (stalk of wheat or rice, maize, corn etc.) due to crop cultivation, which are generally burnt into ashes. Such wastes can be utilized for bioenergy energy production, which would help for the reduction of climate changes or other toxic gases. Hydrogen, bioelectricity, ethanol, butanol, methane and algal diesel or other types of fuel sources would help to provide sustainable source of bioenergy that can be produced from these wastes via degradation by the biological processes. This review will discuss in depths about the sustainable nature of organic matters to produce clean energy via application of efficient biological methods to maintain a clean environment, thereby providing alternative options to fossil energy fuels.

Microalgae carbon fixation integrated with organic matters recycling from soybean wastewater: Effect of pH on the performance of hybrid system

Microalgae have been considered as promising alternative for CO2 fixation and wastewater purification. In our previous work, a hybrid microalgae CO2 fixation concept has been put forward, which initially used carbonate solution absorb CO2, and then provided obtained bicarbonate as nutrition for microalgae growth to avoid the challenge of low CO2 solubility and carbon fixation efficiency in the conventional process. In this work, the proposed hybrid system was further intensified via integrating soybean wastewater nutrition removal with bicarbonate-carbon (NH4HCO3 and KHCO3) conversion. The investigation results indicated that the maximum biomass productivity (0.74 g L-1) and carbon bioconversion efficiency (46.9%) were achieved in low-NH4HCO3 concentration system with pH adjusted to 7. pH adjustment of different bicarbonate systems also enhanced total nitrogen (TN), total phosphorus (TP) and chemical oxygen demand (COD) removal efficiency up to 87.5%, 99.5% and 77.6%, respectively. In addition, maximum neutral lipid (14.4 mg L-1·d-1) and polysaccharide (14.5 mg L-1·d-1) productivities could be obtained in the KHCO3 systems, while higher crude protein productivity (48.1 mg L-1·d-1) was yielded in the NH4HCO3 systems.

Critical processes and variables in microalgae biomass production coupled with bioremediation of nutrients and CO2 from livestock farms: A review

Development of renewable and clean energy as well as bio-based fine chemicals technologies are the keys to overcome the problems such as fossil depletion, global warming, and environment pollution. To date, cultivation of microalgae using wastewater is regarded as a promising approach for simultaneous nutrients bioremediation and biofuels production due to their high photosynthesis efficiency and environmental benefits. However, the efficiency of nutrients removal and biomass production strongly depends on wastewater properties and microalgae species. Moreover, the high production cost is still the largest limitation to the commercialization of microalgae biofuels. In this review paper, the state-of-the-art algae species employed in livestock farm wastes have been summarized. Further, microalgae cultivation systems and impact factors in livestock wastewater to microalgae growth have been thoroughly discussed. In addition, technologies reported for microalgal biomass harvesting and CO₂ mass transfer enhancement in the coupling process were presented and discussed. Finally, this article discusses the potential benefits and challenges of coupling nutrient bioremediation, CO₂ capture, and microalgal production. Possible engineering measures for cost-effective nutrients removal, carbon fixation, microalgal biofuels and bioproducts production are also proposed.

CO2 utilization: Turning greenhouse gas into fuels and valuable products

This study critically reviews the recent developments and future opportunities pertinent to the conversion of CO₂ as a potent greenhouse gas (GHG) to fuels and valuable products. CO₂ emissions have reached an alarming level of around 410 ppm and have become the primary driver of global warming and climate change leading to devastating events such as droughts, hurricanes, torrential rains, floods, tornados and wildfires across the world. These events are responsible for thousands of deaths and have adversely affected the economic development of many countries, loss of billions of dollars, across the globe. One of the promising choices to tackle this issue is carbon sequestration by pre- and post-combustion processes and oxyfuel combustion. The captured CO₂ can be converted into fuels and valuable products, including methanol, dimethyl ether (DME), and methane (CH₄). The efficient use of the sequestered CO₂ for the desalinization might be critical in overcoming water scarcity and energy issues in developing countries. Using the sequestered CO₂ to produce algae in combination with wastewater, and producing biofuels is among the promising strategies. Many methods, like direct combustion, fermentation, transesterification, pyrolysis, anaerobic digestion (AD), and gasification, can be used for the conversion of algae into biofuel. Direct air capturing (DAC) is another productive technique for absorbing CO₂ from the atmosphere and converting it into various useful energy resources like CH₄. These methods can effectively tackle the issues of climate change, water security, and energy crises. However, future research is required to make these conversion methods cost-effective and commercially applicable.

Biofuel Application as a Factor of Sustainable Development Ensuring: The Case of Russia

Diffusion of the biofuels (BF) using is justified by opening up the opportunities for obtaining fuel and energy from previously inaccessible sources and by the existence of energy-deficient regions, in particular in Russia. Works of different scientists on the problems of creating and using BF were the methodological basis of this study. Information on the state and prospects of the development of renewable energy sources in Russian regions was collected from regulatory documents and was obtained by employing a questionnaire survey. For the study of the collected materials, the different methods of comparative analysis, and the methods of expert assessments were used. The results of the Status-Quo analysis of BF production in Russia have shown that the creation of BF performed relatively successfully. However, there are many more perspectives, connected with expanding the utilization of the different raw materials. Also, the analysis of organizational and economic mechanisms applied for production of BF and the obtained data on several organizations-producers allowed for proposing six indexes for the assessment of the BF production effectiveness. It is suggested that BF production in Russia will contribute to the sustainable development of a number of the country’s regions in the near future.

Bioenergy from biofuel residues and waste

This section presents a review of the scientific literature published in 2018 on topics relating to sustainable bioenergy from biofuel residues and waste. This review is divided into the following sections: Feedstocks, Bioethanol, Biodiesel, Biohydrogen, Hydrogen, Biofuel Residues, Microalgae, and Lignocelluloses.

Screening of oleaginous algal strains from Chlamydomonas reinhardtii mutant libraries via density gradient centrifugation

Microalgae have a high potential to be utilized as feedstock for biofuels because they have high growth rates and do not compromise food production. Commercialized algae-based biofuel production relies on the development of strains with high lipid content. Based on the relatively low density of lipids compared to other cellular components, density gradient centrifugation was used to isolate high lipid content algal strains from Chlamydomonas reinhardtii mutant libraries. The correlation between cell density and lipid content was confirmed by analysis of Nile red fluorescence intensity, total lipids, and total fatty acid methyl ester content. A strain isolated by this screening method had 50% higher lipid content and 7% lower cell density than the parent wild-type strain. Consequently, we demonstrated that screening of algal strains with low cell density via continuous density gradient centrifugation allows simple, rapid, and inexpensive screening for high lipid content strains.

Combination of nejayote and swine wastewater as a medium for Arthrospira maxima and Chlorella vulgaris production and wastewater treatment

Nejayote and swine wastewater are highly pollutant effluents and a source of organic matter load that sometimes released into water bodies (rivers or lakes), soils or public sewer system, with or without partial treatments. Nejayote is a wastewater product of alkaline cooking of maize, whereas, swine wastewater results from the primary production of pigs for the meat market. Owing to the presence of environmentally related pollutants, both sources are considered the major cause of pollution and thus require urgent action. Herein, we report a synergistic approach to effectively use and/or treat Nejayote and swine wastewater as a cost-effective culture medium for microalgae growth, which ultimately induces the removal of polluting agents. In this study, the strains Arthrospira maxima and Chlorella vulgaris were grown using different dilutions of Nejayote and swine wastewater. Both wastewaters were used as the only source of macronutrients and trace elements for growth. For A. maxima, the treatment of 10% nejayote and 90% of water (T3) resulted in a cell growth of 32 × 10⁴ cell/mL at 12 days (μ_max = 0.27/d). While, a mixture of 25% swine wastewater, 25% nejayote and 50% water (T2) produced 32 × 10⁴ cell/mL at 18 days (μ_max = 0.16/d). A significant reduction was also noted as 92% from 138 mg/L of TN, 75% from 77 mg/L of TP, and 96% from 8903 mg/L of COD, among different treatments. For C. vulgaris, the treatment of 10% swine wastewater and 90% water (T1) gave a cell growth of 128 × 10⁶ cell/mL (μ_max = 0.57/d) followed by T3 yielded 62 × 10⁶ cell/mL (μ_max = 0.70/d) and T2 yielded 48 × 10⁶ cell/mL (μ_max = 0.54/d). Up to 91% reduction from 138 mg/L of TN, 85% from 19 mg/L of TP and 96% from 4870 mg/L of COD was also recorded. These results show that microalgae can be used to treat these types of wastewater while at the same time using them as a culture media for microalgae. The resultant biomass can additionally be used for getting other sub-products of commercial interest.

Microalgae Brewery Wastewater Treatment: Potentials, Benefits and the Challenges

Concerns about environmental safety have led to strict regulations on the discharge of final brewery effluents into water bodies. Brewery wastewater contains huge amounts of organic compounds that can cause environmental pollution. The microalgae wastewater treatment method is an emerging environmentally friendly biotechnological process. Microalgae grow well in nutrient-rich wastewater by absorbing organic nutrients and converting them into useful biomass. The harvested biomass can be used as animal feed, as an alternative energy source for biodiesel production and as biofertilizer. This review discusses conventional and current brewery wastewater treatment methods, and the application and potential of microalgae in brewery wastewater treatment. This study also discusses the benefits as well as challenges associated with microalgae brewery and other industrial wastewater treatments.

Latest development in microalgae-biofuel production with nano-additives

BACKGROUND

Microalgae have been experimented as a potential feedstock for biofuel generation in current era owing to its' rich energy content, inflated growth rate, inexpensive culture approaches, the notable capacity of CO₂ fixation, and O₂ addition to the environment. Currently, research is ongoing towards the advancement of microalgal-biofuel technologies. The nano-additive application has been appeared as a prominent innovation to meet this phenomenon.

MAIN TEXT

The main objective of this study was to delineate the synergistic impact of microalgal biofuel integrated with nano-additive applications. Numerous nano-additives such as nano-fibres, nano-particles, nano-tubes, nano-sheets, nano-droplets, and other nano-structures' applications have been reviewed in this study to facilitate microalgae growth to biofuel utilization. The present paper was intended to comprehensively review the nano-particles preparing techniques for microalgae cultivation and harvesting, biofuel extraction, and application of microalgae-biofuel nano-particles blends. Prospects of solid nano-additives and nano-fluid applications in the future on microalgae production, microalgae biomass conversion to biofuels as well as enhancement of biofuel combustion for revolutionary advancement in biofuel technology have been demonstrated elaborately by this review. This study also highlighted the potential biofuels from microalgae, numerous technologies, and conversion processes. Along with that, the study recounted suitability of potential microalgae candidates with an integrated design generating value-added co-products besides biofuel production.

CONCLUSIONS

Nano-additive applications at different stages from microalgae culture to end-product utilization presented strong possibility in mercantile approach as well as positive impact on the environment along with valuable co-products generation into the near future.

The Use of Microalgae for Coupling Wastewater Treatment With CO2 Biofixation

Production and emission of CO2 from different sources have caused significant changes in the climate, which is the major concern related to global warming. Among other CO2 removal approaches, microalgae can efficiently remove CO2 through the rapid production of algal biomass. In addition, microalgae have the potential to be used in wastewater treatment. Although, wastewater treatment and CO2 removal by microalgae have been studied separately for a long time, there is no detailed information available on combining both processes. In this review article, microalgae-based CO2 biofixation, various microalgae cultivation systems,¯ and microalgae-derived wastewater treatment are separately discussed, followed by the concept of integration of CO2 biofixation process and wastewater treatment. In each section, details of energy efficiency and differences across microalgae species are also given.

A review of the innovative gas separation membrane bioreactor with mechanisms for integrated production and purification of biohydrogen

This review article focuses on an assessment of the innovative Gas Separation Membrane Bioreactor (GS-MBR), which is an emerging technology because of its potential for in-situ biohydrogen production and separation. The GS-MBR, as a special membrane bioreactor, enriches CO₂ directly from the headspace of the anaerobic H₂ fermentation process. CO₂ can be fed as a substrate to auxiliary photo-bioreactors to grow microalgae as a promising raw material for biocatalyzed, dark fermentative H₂-evolution. Overall, these features make the GS-MBR worthy of study. To the best of the authors' knowledge, the GS-MBR has not been studied in detail to date; hence, a comprehensive review of this topic will be useful to the scientific community.

Impact of surface tension of wastewater on biofilm formation of microalgae Chlorella sp

The organic matter and surfactants in wastewater may cause variations in the surface tension of wastewater (STW) ranging between ∼40 and ∼70 mJ·m^-2. This study focused on the influence of STW on microalgae biofilm formation. A theoretical analysis was first conducted, and then microalgae biofilm formation on hydrophilic and hydrophobic substrata in liquid and real wastewater with different surface tensions was studied. The results demonstrated that STW affected microalgae biofilm formation remarkably. When the surface tension of liquid medium (γ^lv) was approximately equal to the average value of surface free energy of microalgae and substrata, biofilm formation reached the minimum. Microalgae biofilm formation on a hydrophilic surface first decreased (from ∼2200 to ∼1500 cells/mm²) and then increased (from ∼1500 to 3100 cells/mm²) with the decrease in γ^lv (from ∼70 to ∼40 mJ·m^-2), whereas biofilm on a hydrophobic surface continued to decrease (from ∼2500 to 1000 cells/mm²).