Influence of Fe/HZSM-5 catalyst on elemental distribution and product properties during hydrothermal liquefaction of Nannochloropsis sp

Enhancing humic acids production from cornstalk under fast hydrothermal conditions: Insights into new pathways of skeleton self-polymerization and branch growth

Hydrochar, a sustainable fertilizer rich in humic substances, is made from lignocellulose through hydrothermal conversion. However, hydrothermal humification (HTH) is challenged by low yields and limited selectivity in the resulting hydrochar. This study proved humic-like acids production can be enhanced under fast non-catalytic conditions (260 ∼ 280 °C, 0 ∼ 1 h). A higher yield (by 14.1 %) and selectivity (by 40.2 %) in hydrochar of humic-like acids than conventional HTH (＜250 °C) were achieved. Meanwhile, decreased lignin derivatives, carbonyl and quinone groups, as well as increased sp2-C structures in the humic-like acids were observed. The synthesized humic-like acids exhibited a lower degree of aromatization and a higher molecular weight than commercial variants. Two pathways of humic-like acids formation of self-polymerization and the development of branched sidechains were hypothesized based on mass mitigation, carbon flow and aqueous phase compositions. This research contributes a novel approach to producing humic-like acids rich hydrochar for environmentally friendly fertilizer production.

Effects of Lipids and Type of Amino Acid in Protein in Microalgae on Nitrogen Reaction Pathways during Hydrothermal Liquefaction

It is meaningful to understand the conversion pathways of nitrogen during the hydrothermal liquefaction process of microalgae to reveal the related reaction mechanisms and develop effective methods to prevent N from ending in biocrude, which eventually increases the quality of biocrude. Extending from our previous works that mainly focused on two high-protein (>50 wt%) microalgae (Chlorella sp. and Spirulina sp.), Nannochloropsis sp., which has a high lipid content (>70 wt%), was used as the feedstock for this project using the same methodology. The high lipid content in Na. induced less nitrogen during the oil phase and as a result, reduced the heteroatom content while also improving the quality of biocrude. It is worth noting that another investigation was conducted on the model compounds with different types of amino acids to specify the effects of the types of amino acids in the proteins in microalgae on the N pathway and their distribution in the products (aqueous phase, oil, solid, and gas). It was found that the basic amino acid in microalgae caused the formation of more N-heterocyclic compounds in the biocrude. The mass flow based on the mass balance was demonstrated to further refine the map showing the predicted reaction pathway of nitrogen from the previous version.

Current challenges of hydrothermal treated wastewater (HTWW) for environmental applications and their perspectives: A review

Hydrothermal treatment (HT) is an emerged thermochemical approach for the utilization of biomass. In the last decade, intense research has been conducted on bio-oil and hydrochar, during which extensive amount of hydrothermal treated wastewater (HTWW) is produced, containing large amount of organic compounds along with several toxic chemicals. The composition of HTWW is highly dependent on the process conditions and organic composition of biomass, which determines its further utilization. The current study provides a comprehensive overview of recent advancements in HTWW utilization and its properties which can be changed by varying different parameters like temperature, residence time, solid concentration, mass ratio and catalyst including types of biomasses. HTWW characterization, parameters, reaction mechanism and its application were also summarized. By considering the challenges of HTWW, some suggestions and proposed methodology to overcome the bottleneck are provided.

Review on hydrothermal liquefaction aqueous phase as a valuable resource for biofuels, bio-hydrogen and valuable bio-chemicals recovery

Hydrothermal liquefaction (HTL) of biomass results in the formation of bio-oil, aqueous phase (HTL-AP), bio-char, and gaseous products. Safer disposal of HTL-AP is difficult on an industrial scale since it comprises low molecular acid compounds. This review provides a comprehensive note on the recent articles published on the effective usage of HTL-AP for the recovery of valuable compounds. Thermo-chemical and biological processes are the preferred techniques for the recovery of biofuel, platform chemicals from HTL-AP. From this review, it was evident that the composition of HTL-AP and product recovery are the integrated pathways, which depend on each other. Substitute as reaction medium in HTL process, growth medium for algae and microbes are the most common mode of reuse and recycle of HTL-AP. Future research is needed to depict the mechanism of HTL process when HTL-AP is used as a reaction medium on an industrial scale. Need to find a solution for the hindrance in commercializing HTL process and recovery of value-added compounds from HTL-AP from lab scale to industry level. Integrated pathways on reuse and HTL-AP recycle helps in reduced environmental concerns and sustainable production of bio-products.

Iron-catalyzed fast hydrothermal liquefaction of Cladophora socialis macroalgae into high quality fuel precursor

Fast hydrothermal liquefaction of acid-washed Cladophora socialis macroalgae has been studied over homogeneous (KOH, K₂CO₃, H₃PO₄, HCOOH) and heterogeneous (H-ZSM-5, Raney Ni, Ru/C, Fe metal) catalysts in a batch reactor at 350 °C. Biocrude with maximum yield (36.2%) and energy density (37.1 MJ kg^-1) and minimum heteroatom contents (3.8% N and 10.1% O) were achieved with metallic Fe. GC-MS indicates reduction in content of carbonyls, acids and N-containing substances and increase in levels of phenols and hydrocarbons in biocrude while ¹H NMR suggests the enhanced formation of oxygenated/nitrogenous compounds in aqueous phase over Fe catalyst compared to non-catalytic test. Such carbonyls and acids removal was proposed to occur via hydride reduction and decarboxylation pathways, respectively. GPC and TAN confirm vast improvement in stability and corrosiveness properties of Fe-catalyzed biocrude. Regeneration of used catalyst has been conducted and the regenerated catalyst exhibited slight deactivation, likely due to sintering of Fe particles.

The Application of Catalytic Processes on the Production of Algae-Based Biofuels: A Review

Over the last decades, microalgal biomass has gained a significant role in the development of different high-end (nutraceuticals, colorants, food supplements, and pharmaceuticals) and low-end products (biodiesel, bioethanol, and biogas) due to its rapid growth and high carbon-fixing efficiency. Therefore, microalgae are considered a useful and sustainable resource to attain energy security while reducing our current reliance on fossil fuels. From the technologies available for obtaining biofuels using microalgae biomass, thermochemical processes (pyrolysis, Hydrothermal Liquefaction (HTL), gasification) have proven to be processed with higher viability, because they use all biomass. However, due to the complex structure of the biomass (lipids, carbohydrates, and proteins), the obtained biofuels from direct thermochemical conversion have large amounts of heteroatoms (oxygen, nitrogen, and sulfur). As a solution, catalyst-based processes have emerged as a sustainable solution for the increase in biocrude production. This paper’s objective is to present a comprehensive review of recent developments on the catalyst-mediated conversion of algal biomass. Special attention will be given to operating conditions, strains evaluated, and challenges for the optimal yield of algal-based biofuels through pyrolysis and HTL.

Effects of reaction conditions on products and elements distribution via hydrothermal liquefaction of duckweed for wastewater treatment

Wastewater treatment by duckweed is a naturally sustainable technology. However, its development is limited due to the lack of a follow-up treatment of duckweed. The duckweed was proposed for the treatment of rural domestic wastewater and agricultural wastewater, and it was further processed to produce bio-oil via hydrothermal liquefaction at various temperatures (250 °C-370 °C) and residence times (15-60 min). The highest bio-oil yield of 35.6 wt% was obtained at 370 °C, 45 min. The higher heating value of bio-oil was 40.85 MJ/kg, and the H/C ratio (1.72-1.98) was similar to that of petroleum (1.84). The gas chromatography-mass spectrometry analysis results revealed that the bio-oil mainly consisted of N-heterocycles, cyclic ketones, esters, amides, long-chain hydrocarbons, phenols, and aromatic intermediates. Valuable compounds (3-pyridinol, 2-pyrrolidinone, and its analogues) of high concentration were identified in the water-soluble organic matter. Compared with other materials, this study produced higher-quality bio-oil and water-soluble organic matter.

Hydrothermal liquefaction of Fe-impregnated water hyacinth for generation of liquid bio-fuels and nano Fe carbon hybrids

In this work, hydrothermal liquefaction experiments of iron impregnated water hyacinth were performed with a motive to enhance bio-oil yields along with generation of nanometal carbon hybrids. Iron nanoparticles were impregnated and its metal loading was determined by ICP-MS. The impact of operating parameters like temperature, biomass to water ratio and reaction time on bio-oil yields was studied. During hydrothermal liquefaction a maximum total bio-oil yield of 38.1% was obtained at 280 °C along with formation of nanometal carbon hybrids. The light oil and heavy oil fractions were characterized by GCMS and NMR for determining the key components. The light oil mainly comprises of alkanes, alcohols and esters whereas heavy oil contains esters, ethers, carboxylic acids and phenols. XRD and XPS of Fe-impregnated water hyacinth and residues confirmed the transition of Fe^+3/+2 to Fe⁰. TEM analysis resulted an average particle size of Fe nanoparticles around 19.6 nm.

Deposition of NiO Nanoparticles on Nanosized Zeolite NaY for Production of Biofuel via Hydrogen-Free Deoxygenation

Nickel-based catalysts play an important role in the hydrogen-free deoxygenation for the production of biofuel. The yield and quality of the biofuel are critically affected by the physicochemical properties of NiO supported on nanosized zeolite Y (Y65, crystal size of 65 nm). Therefore, 10 wt% NiO supported on Y65 synthesized by using impregnation (IM) and deposition–precipitation (DP) methods were investigated. It was found that preparation methods have a significant effect on the deoxygenation of triolein. The initial rate of the DP method (14.8 g_oil·h⁻¹) was 1.5 times higher than that of the IM method (9.6 g_oil·h⁻¹). The DP-Y65 showed the best deoxygenation performance with a 80.0% conversion and a diesel selectivity of 93.7% at 380 °C within 1 h. The outstanding performance from the DP method was due to the smaller NiO particle size (3.57 ± 0.40 nm), high accessibility (H.F value of 0.084), and a higher Brönsted to Lewis acidity (B/L) ratio (0.29), which has improved the accessibility and deoxygenation ability of the catalyst. The NH₄⁺ released from the decomposition of the urea during the DP process increased the B/L ratio of zeolite NaY. As a result, the pretreatment to convert Na-zeolite to H-zeolite in a conventional zeolite synthesis can be avoided. In this regard, the DP method offers a one-pot synthesis to produce smaller NiO-supported nanosized zeolite NaY with a high B/L ratio, and it managed to produce a higher yield with selectivity towards green diesel via deoxygenation under a hydrogen-free condition.

Catalytic Thermochemical Conversion of Algae and Upgrading of Algal Oil for the Production of High-Grade Liquid Fuel: A Review

The depletion of fossil fuel has drawn growing attention towards the utilization of renewable biomass for sustainable energy production. Technologies for the production of algae derived biofuel has attracted wide attention in recent years. Direct thermochemical conversion of algae obtained biocrude oil with poor fuel quality due to the complex composition of algae. Thus, catalysts are required in such process to remove the heteroatoms such as oxygen, nitrogen, and sulfur. This article reviews the recent advances in catalytic systems for the direct catalytic conversion of algae, as well as catalytic upgrading of algae-derived oil or biocrude into liquid fuels with high quality. Heterogeneous catalysts with high activity in deoxygenation and denitrogenation are preferable for the conversion of algae oil to high-grade liquid fuel. The paper summarized the influence of reaction parameters and reaction routes for the catalytic conversion process of algae from critical literature. The development of new catalysts, conversion conditions, and efficiency indicators (yields and selectivity) from different literature are presented and compared. The future prospect and challenges in general utilization of algae are also proposed.

Reaction engineering and kinetics of algae conversion to biofuels and chemicals via pyrolysis and hydrothermal liquefaction

A state-of-the-art review on pyrolysis and hydrothermal liquefaction of algae to fuels and chemicals with emphasis on reaction chemistry and kinetics.

Comparative production of biochars from corn stalk and cow manure

The aim of the present work was to compare corn stalk (CS) and cow manure (CM) for hydrochar production at different reaction temperatures (180-260 °C) and retention times (1-4 h). CM and CS resulted in hydrochars with significantly different physicochemical properties; however, both led to similar yields (30-65%). CM-derived hydrochar had a lower carbon content but a higher nitrogen and ash content than CS-derived hydrochar. CM-derived hydrochar demonstrated potential as a soil amendment due to its higher content of nitrogen, the presence of surface functional groups and higher specific surface area in comparison to CS-derived hydrochar. In comparison, CS-derived hydrochar demonstrated suitability as a solid fuel due to its high heating value and low ignition temperature. This study revealed that the composition of lignocellulose significantly impacted the properties and thus potential applications of hydrochar.