Ternary MIL-100(Fe)@Fe3O4/CA magnetic nanophotocatalysts (MNPCs): Magnetically separable and Fenton-like degradation of tetracycline hydrochloride

Effective removal of acetamiprid and eosin Y by adsorption on pristine and modified MIL-101(Fe)

In this work, the efficacy of two metal-organic frameworks (MIL-101(Fe) and NH2-MIL-101(Fe)) in eliminating acetamiprid (ATP) insecticide and eosin Y (EY) dye from aqueous solution is tested. An analysis was conducted on the developed nanocomposite's optical, morphological, and structural characteristics. The adsorption isotherm, kinetics, thermodynamics, reusability, and mechanisms for ATP and EY dye removal were assessed. NH2-MIL-101(Fe) adsorbed 76% and 90% of ATP pesticide and EY dye, respectively after 10 to 15 min in optimum conditions. For both adsorbents, with regard to explaining the isotherm data, the Langmuir model offered the most accurate description. Moreover, the adsorption of ATP and EY dye is described by the pseudo-second-order kinetic model. The maximum adsorption capacities of ATP and EY dye on MIL-101(Fe) were 57.6 and 48.9 mg/g compared to 70.5 and 97.8 mg/g using NH2-MIL-101(Fe). The greatest amount of ATP and EY dye clearance was obtained at a neutral medium for both adsorbents. The results of this investigation demonstrate the effectiveness of MIL-101(Fe) and NH2-MIL-101(Fe) as effective substances in the adsorption process for removing pesticides and dyes from aqueous solution.

Nanotechnology-assisted treatment of pharmaceuticals contaminated water

The presence of pharmaceutical compounds in wastewater due to an increase in industrialization and urbanization is a serious health concern. The demand for diverse types of pharmaceutical compounds is expected to grow as there is continuous improvement in the global human health standards. Discharge of domestic pharmaceutical personal care products and hospital waste has aggravated the burden on wastewater management. Further, the pharmaceutical water is toxic not only to the aquatic organism but also to terrestrial animals coming in contact directly or indirectly. The pharmaceutical wastes can be removed by adsorption and/or degradation approach. Nanoparticles (NPs), such as 2D layers materials, metal-organic frameworks (MOFs), and carbonaceous nanomaterials are proven to be more efficient for adsorption and/or degradation of pharmaceutical waste. In addition, inclusion of NPs to form various composites leads to improvement in the waste treatment efficacy to a greater extent. Overall, carbonaceous nanocomposites have advantage in the form of being produced from renewable resources and the nanocomposite material is biodegradable either completely or to a great extent. A comprehensive literature survey on the recent advancement of pharmaceutical wastewater is the focus of the present article.

Optimizing the performance of Fe-based metal-organic frameworks in photo-Fenton processes: Mechanisms, strategies and prospects

Contaminants in water pose a significant challenge as they are harmful and difficult to treat using conventional methods. Therefore, various new methods have been proposed to degrade organic pollutants in water, among which the photo-Fenton process is considered promising. In recent years, Fe-based metal-organic frameworks (Fe-MOFs) have gained attention and found applications in different fields due to their cost-effectiveness, non-toxic nature, and unique porous structure. Many researchers have applied Fe-MOFs to the photo-Fenton process in recent years and achieved good results. This review focuses on describing different strategies for enhancing the performance of Fe-MOFs in the photo-Fenton process. Also, the mechanism of MOF in the photo-Fenton process is described in detail. Finally, prospects for the application of Fe-MOFs in photo-Fenton systems for the treatment of organic pollutants in water are presented. This study provides information and ideas for researchers to use Fe-MOFs to remove organic pollutants from water by photo-Fenton process.

Application and Development Prospect of Nanoscale Iron Based Metal-Organic Frameworks in Biomedicine

Metal-organic frameworks (MOFs) are coordination polymers that comprise metal ions/clusters and organic ligands. MOFs have been extensively employed in different fields (eg, gas adsorption, energy storage, chemical separation, catalysis, and sensing) for their versatility, high porosity, and adjustable geometry. To be specific, Fe2+/Fe3+ exhibits unique redox chemistry, photochemical and electrical properties, as well as catalytic activity. Fe-based MOFs have been widely investigated in numerous biomedical fields over the past few years. In this study, the key index requirements of Fe-MOF materials in the biomedical field are summarized, and a conclusion is drawn in terms of the latest application progress, development prospects, and future challenges of Fe-based MOFs as drug delivery systems, antibacterial therapeutics, biocatalysts, imaging agents, and biosensors in the biomedical field.

Controllable synthesis of copper-organic frameworks via ligand adjustment for enhanced photo-Fenton-like catalysis

The efficient heterogeneous photo-Fenton-like catalysts based on two secondary ligand-induced Cu(II) metal-organic frameworks (Cu-MOF-1 and Cu-MOF-2) were constructed for the first time and investigated for the degradation of multiple antibiotics. Herein, two novel Cu-MOFs were prepared using mixed ligands by a facile hydrothermal method. The one-dimensional (1D) nanotube-like structure could be obtained by using V-shaped, long and rigid 4,4'-bis(3-pyridylformamide)diphenylether (3-padpe) ligand in Cu-MOF-1, while polynuclear Cu cluster could be prepared more easily by using short and small isonicotinic acid (HIA) ligand in Cu-MOF-2. Their photocatalytic performances were measured by degradation of multiple antibiotics in Fenton-like system. Comparatively, Cu-MOF-2 exhibited superior photo-Fenton-like performance under visible light irradiation. The outstanding catalytic performance of Cu-MOF-2 was ascribed to the tetranuclear Cu cluster configuration and excellent ability of photoinduced charge transfer and hole separation thus improved the photo-Fenton activity. In addition, Cu-MOF-2 showed high photo-Fenton activity in wide pH working range 3-10 and maintained wonderful stability after five cyclic experiments. The degradation intermediates and pathways were deeply studied. The main active species h⁺, O₂^- and OH worked together in photo-Fenton-like system and possible degradation mechanism was proposed. This study provided a new approach to design the Cu-based MOFs Fenton-like catalysts.

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

Functionalized magnetic nanostructured composites and hybrids for photocatalytic elimination of pharmaceuticals and personal care products

Due to rapid urbanization and globalization, an enormous use of pharmaceuticals and personal care products (PPCPs) has resulted their excessive release in water bodies leading to several environmental issues. This release into the environment takes place via household sewage, hospital effluents, manufacturing units and landfill sites etc. The pharmaceuticals and personal care products (PPCPs) are recently listed as emerging contaminants having many adverse effects towards aquatic life, human beings, and the whole ecosystem. The alarming threats of PPCPs demand efficient methods to cope up their hazardous impacts. The conventional wastewater remediations are not specifically designed for the removal of PPCPs and hence, they require advanced technologies and materials for their elimination to ensure water safety. Among various methods employed so far, photocatalysis is considered to be one of the most cost effective and eco-friendly method but it requires a suitable candidate as a photocatalyst. Thanks to the magnetic nanocomposites which have improved the limitations (poor stability, agglomeration, and difficult separation, etc.) of classically used nanomaterials. Magnetic nanocomposites contain at least one component having magnetic properties making their separation easy from the aqueous media after the photodegradation phenomenon. These can be further functionalized with other materials to obtain maximum advantage as photocatalyst. Few examples of such functionalized nanocomposites are inorganic material based magnetic nanocomposites, carbon based magnetic nanocomposites, biomaterial based magnetic nanocomposites, metal-organic framework based magnetic nanocomposites and polymer based magnetic nanocomposites etc. This review covers the global environmental issue of water pollution especially with respect to the PPCPs, their occurrence in aqueous environment and toxic effects on living beings. A comprehensive discussion of the recently reported functionalized magnetic nanocomposites for the photocatalytic removal of PPCPs from water is the main aim of this review. The synthetic/morphological approaches of various functionalized magnetic composites and their mechanism of action are also elaborated. The possible research challenges in the field of magnetic nanocomposites and future research directions are discussed to apply magnetic nanocomposites for wastewater treatment in near future.

Synthesis, modifications and applications of MILs Metal-organic frameworks for environmental remediation: The cutting-edge review

Ever-increasing anthropogenic activities are radically deteriorating the environment by causing severe pollution. Thus, curtailing the environmental pollution and promotion of sustainable development, are the hot issues confronted by scientists in this modern era. Metal-organic frameworks (MOFs) have been highly recognized as emerging promising materials for environmental remediation due to their versatile structure and extraordinary properties. Among them, MILs (MIL = Matérial Institute of Lavoisier) are the series of MOFs mostly known for their incredible stability, unique tailorable pore structures, and astounding versatile environmental applications. Their exclusive physiochemical properties and multifunctionality make them proficient for a wide range of pollutants removal in the exposure of versatile harsh environments, compared to other MOFs. This piece of research summarizes the state-of-the-art of development of MILs on the broad spectrum, highlighting their specificities, such as synthesis techniques, modifications and applications for environmental remediation. However, MILs wonderful properties and extraordinary applications in multiple fields, their deployment on practical and commercial-scale pollutants remediation is hindered by insufficient scientific research on underlying mechanisms and relationships. Henceforth, this review not only signifies the emerging importance of MILs for environmental applications but also indicates the urgency to maximize the scientific research for exploitation of MOFs on a practical level and promotion of green technologies for environmental remediation.

Near-infrared light-triggered β-NaYF4:Yb,Tm,Gd@MIL-100(Fe) nanomaterials for antibacterial applications

By inducing a photo-Fenton reaction under 980 nm light irradiation, β-NaYF4:Yb,Tm,Gd@MIL-100(Fe) could generate abundant ROS for antibacterial applications.

Application of Magnetic Composites in Removal of Tetracycline through Adsorption and Advanced Oxidation Processes (AOPs): A Review

Water pollution induced by the tetracycline (TC) has caused global increasing attention owing to its extensive use, environmental persistence, and potential harm for human health. Adsorption and advanced oxidation processes (AOPs) have been promising techniques for TC removal due to ideal effectiveness and efficiency. Magnetic composites (MCs) which exploit the combined advantages of nano scale, alternative sources, easy preparation, and separation from wastewater are widely used for catalysis and adsorption. Herein, we intensively reviewed the available literature in order to provide comprehensive insight into the applications and mechanisms of MCs for removal of TC by adsorption and AOPs. The synthesis methods of MCs, the TC adsorption, and removal mechanisms are fully discussed. MCs serve as efficient adsorbents and photocatalysts with superior performance of photocatalytic performance in TC degradation. In addition, the TC can be effectively decomposed by the Fenton-based and SO4•− mediated oxidation under catalysis of the reported MCs with excellent catalytic performance. Based on the existing literature, we further discuss the challenge and future perspectives in MCs-based adsorption and AOPs in removing TC.

Heterogeneous Fenton catalysts: A review of recent advances

Heterogeneous Fenton catalysts are emerging as excellent materials for applications related to water purification. In this review, recent trends in the synthesis and application of heterogeneous Fenton catalysts for the abatement of organic pollutants and disinfection of microorganisms are discussed. It is noted that as the complexity of cell wall increases, the resistance level towards various disinfectants increases and it requires either harsh conditions or longer exposure time for the complete disinfection. In case of viruses, enveloped viruses (e.g. SARS-CoV-2) are found to be more susceptible to disinfectants than the non-enveloped viruses. The introduction of plasmonic materials with the Fenton catalysts broadens the visible light absorption efficiency of the hybrid material, and incorporation of semiconductor material improves the rate of regeneration of Fe(II) from Fe(III). A special emphasis is given to the use of Fenton catalysts for antibacterial applications. Composite materials of magnetite and ferrites remain a champion in this area because of their easy separation and reuse, owing to their magnetic properties. Iron minerals supported on clay materials, perovskites, carbon materials, zeolites and metal-organic frameworks (MOFs) dramatically increase the catalytic degradation rate of contaminants by providing high surface area, good mechanical stability, and improved electron transfer. Moreover, insights to the zero-valent iron and its capacity to remove a wide range of organic pollutants, heavy metals and bacterial contamination are also discussed. Real world applications and the role of natural organic matter are summarised. Parameter optimisation (e.g. light source, dosage of catalyst, concentration of H2O2 etc.), sustainable models for the reusability or recyclability of the catalyst and the theoretical understanding and mechanistic aspects of the photo-Fenton process are also explained. Additionally, this review summarises the opportunities and future directions of research in the heterogeneous Fenton catalysis.

Tetracycline Removal by Activating Persulfate with Diatomite Loading of Fe and Ce

Persulfate (PS)-based oxidation technology is efficient in removing refractory organics from water. A novel diatomite (DIA) support Fe and Ce composite (Fe-Ce/DIA) was prepared for activating persulfate to degrade tetracycline in water. The Fe and Ce were uniformly loaded on DIA, and the total pore size of Fe-Ce/DIA was 6.99 × 10⁻² cm³/g, and the average pore size was 12.06 nm. Fe-Ce/DIA presented a good catalytic activity and 80% tetracycline was removed under the persulfate system. The Fe-Ce/DIA also had photocatalytic activity, and the corresponding tetracycline removal efficiency was 86% under UV irradiation. Fe-Ce/DIA exhibited less iron dissolution rate compared with Fe-DIA. The tetracycline degradation rate was enhanced when the temperature increased. The optimal tetracycline removal efficiency was obtained when the conditions were of persulfate 10 mM, Fe-Ce/DIA dosage 0.02 g/L, and tetracycline concentration 50 mg/L. In addition, Fe-Ce/DIA showed a wide pH application and good reusability and stability.

A Critical Review on Metal-Organic Frameworks and Their Composites as Advanced Materials for Adsorption and Photocatalytic Degradation of Emerging Organic Pollutants from Wastewater

Water-borne emerging pollutants are among the greatest concern of our modern society. Many of these pollutants are categorized as endocrine disruptors due to their environmental toxicities. They are harmful to humans, aquatic animals, and plants, to the larger extent, destroying the ecosystem. Thus, effective environmental remediations of these pollutants became necessary. Among the various remediation techniques, adsorption and photocatalytic degradation have been single out as the most promising. This review is devoted to the compilations and analysis of the role of metal-organic frameworks (MOFs) and their composites as potential materials for such applications. Emerging organic pollutants, like dyes, herbicides, pesticides, pharmaceutical products, phenols, polycyclic aromatic hydrocarbons, and perfluorinated alkyl substances, have been extensively studied. Important parameters that affect these processes, such as surface area, bandgap, percentage removal, equilibrium time, adsorption capacity, and recyclability, are documented. Finally, we paint the current scenario and challenges that need to be addressed for MOFs and their composites to be exploited for commercial applications.

UiO-66(Ti)-Fe3O4-WO3 photocatalyst for efficient ammonia degradation from wastewater into continuous flow-loop thin film slurry flat-plate photoreactor

This work presents the characterization of novel synthesized UiO-66(Ti)-Fe₃O₄-WO₃ magnetic photocatalyst and investigates their photocatalytic activity for the photodegradation of ammonia in a designed continuous flow-loop thin-film slurry flat-plate photoreactor (TFSR). Excellent ammonia degradation efficiency was achieved in the presence of the synthesized catalyst at ambient conditions using no more reactive oxidant species. Several independent variables involving catalyst mass, flowrate, pH, irradiation time and initial ammonia concentration as well as corresponding experiments were analyzed and design using the central composite design (CCD). The influence and significance of each parameter and their binary interactions were then evaluated by applying the analysis of variance. The ammonia degradation efficiency of 91.80 % with the desirability of 0.903 were obtained at optimum values of operational parameters including 550 mL/min,10, 0.125 g/L, 60 min and 30 mg/L for solution flowrate, pH, catalyst mass, irradiation time and initial ammonia concentration, respectively. Furthermore, the liquid phase products of ammonia degradation such as nitrate and nitrite ions were completely removed, and purified water was produced using the combination of reverse osmosis process and mixed resins beds. The photocatalyst mechanism study revealed that [Formula: see text] was the predominant reactive oxygen species in the ammonia photodegradation.

Modified MIL-100(Fe) for enhanced photocatalytic degradation of tetracycline under visible-light irradiation

Iron-based metal-organic frameworks (MOFs) with low cost and excellent photocatalytic potential are extremely attractive in the field of energy utilization and environmental remediation. In this study, a novel In₂S₃/MIL-100(Fe) photocatalyst was successfully synthesized by a facile solvothermal method for the first time. Several technologies (such as X-ray diffraction, scanning electron microscope, transmission electron microscope, and X-ray photoelectron spectroscopy) were used to characterize the as-obtained samples and demonstrate the successful combination of MIL-100(Fe) and In₂S₃. Experimental results showed that 18% of tetracycline (TC) was adsorbed under dark condition and another 70% of TC was degraded under visible-light irradiation when treating 100 mL of TC solution (10 mg/L) with 30 mg of In₂S₃/MIL-100(Fe) composites. The corresponding TC removal efficiency was almost 1.9 and 1.6 times higher than that of pure MIL-100(Fe) and In₂S₃, respectively. The mechanism investigations revealed that the heterojunction composite exhibited superior charge transfer than either MIL-100(Fe) or In₂S₃, and this caused more efficient separation of electron-hole pairs. As a result, more radicals and holes were generated in the composite, leading to better photocatalytic performance. This work highlights the powerful combination of MOFs and semiconductor, which is a promising approach to fabricate heterojunction photocatalyst for wastewater purification.

Ethylene glycol assisted synthesis of hierarchical Fe-ZSM-5 nanorods assembled microsphere for adsorption Fenton degradation of chlorobenzene

A unique zeolite catalyst, Fe doped ZSM-5 microsphere assembled by uniform nanorod-like crystals with hierarchical pore structure, was successfully synthesized and applied for the adsorption and degradation of trace chlorobenzene (CB) in the presence of H₂O₂. The organic ferric salts as the precursors, ethylene glycol as a chelating/reducing agent and the dynamic two-stage temperature-varied hydrothermal technique, together made the synthesized hierarchical Fe-ZSM-5 nanorods assembled microspheres (FZ-CA-5EG) to be characterized by abundant highly dispersed and valency-controlled framework Fe^3+/2+ species. As a result of these features, the FZ-CA-5EG showed excellent ability of adsorption and degradation efficiency of CB, and enhanced durability due to negligible leaching of framework Fe species. Moreover, the hydroxyl radicals were determined as the main the reactive oxygen species of CB oxidation degradation, and a possible adsorption-oxidation degradation pathway was proposed.

Recent advances in MOF-based photocatalysis: environmental remediation under visible light

Highly photoactive MOFs can be engineered via various strategies for the purpose of extended visible light absorption, more efficient generation, separation and transfer of charge carriers, as well as good recyclability.

MIL-100(Fe)/Ti3C2 MXene as a Schottky Catalyst with Enhanced Photocatalytic Oxidation for Nitrogen Fixation Activities

A new microporous MIL-100(Fe)/Ti₃C₂ MXene composite was constructed as a non-noble metal-based Schottky junction photocatalyst with improved nitrogen fixation ability. Ti₃C₂ MXene nanosheets exhibited excellent metal conductivity and were employed as two-dimensional support to optimize the composite's energy band structure. MIL-100(Fe) with a large specific surface area was used as an adsorbent and a photocatalytic oxidation center. The MIL-100(Fe)/Ti₃C₂ MXene composite not only exhibited higher thermal stability but also showed significantly increased nitrogen fixation activity under visible light. The NO conversion rate of the composite catalyst was about four and three times higher than that of the pure Ti₃C₂ MXene and the pure MIL-100(Fe) samples, respectively. Although adsorption plays an important role in the nitrogen fixation process, the synergistic effects of the Schottky junctions are the main cause of the enhanced photocatalytic activity. The built-in electric field can be generated to form charge-transfer channels, which help to achieve a desirable photocatalytic activity.

In Situ Synthesis of MIL-100(Fe) at the Surface of Fe3O4@AC as Highly Efficient Dye Adsorbing Nanocomposite

A new magnetic nanocomposite called MIL-100(Fe) @Fe3O4@AC was synthesized by the hydrothermal method as a stable adsorbent for the removal of Rhodamine B (RhB) dye from aqueous medium. In this work, in order to increase the carbon uptake capacity, magnetic carbon was first synthesized and then the Fe3O4 was used as the iron (III) supplier to synthesize MIL-100(Fe). The size of these nanocomposite is about 30-50 nm. Compared with activated charcoal (AC) and magnetic activated charcoal (Fe3O4@AC) nanoparticles, the surface area of MIL-100(Fe) @Fe3O4@AC were eminently increased while the magnetic property of this adsorbent was decreased. The surface area of AC, Fe3O4@AC, and MIL-100(Fe) @Fe3O4@AC was 121, 351, and 620 m2/g, respectively. The magnetic and thermal property, chemical structure, and morphology of the MIL-100(Fe) @Fe3O4@AC were considered by vibrating sample magnetometer (VSM), thermogravimetric analysis (TGA), zeta potential, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), Brunner-Emmet-Teller (BET), and transmission electron microscopy (TEM) analyses. The relatively high adsorption capacity was obtained at about 769.23 mg/g compared to other adsorbents to eliminate RhB dye from the aqueous solution within 40 min. Studies of adsorption kinetics and isotherms showed that RhB adsorption conformed the Langmuir isotherm model and the pseudo second-order kinetic model. Thermodynamic amounts depicted that the RhB adsorption was spontaneous and exothermic process. In addition, the obtained nanocomposite exhibited good reusability after several cycles. All experimental results showed that MIL-100(Fe) @Fe3O4@AC could be a prospective sorbent for the treatment of dye wastewater.