Simultaneous determination of Nitazoxanide and Ofloxacin in pharmaceutical preparations using UV-spectrophotometric and high performance thin layer chromatography methods

Thiazolidinediones: Recent Development in Analytical Methodologies

The instrumental analytical methods that have been developed and utilized for the determination of thiazolidinedione in bulk medications, formulations and biological fluids have been reviewed after an in-depth analysis of the literature published in a variety of analytical and pharmaceutical chemistry-related journals. The approaches covered by this research, which covers the years 2001-2022, include complex methods for analysis, chromatographic techniques and spectrometric analytical procedures. The mobile phase, flow rate, sample matrix, wavelength and other factors identified in the literature were just a few of the parameters used to evaluate thiazolidinediones. The present review focuses on the published analytical techniques for thiazolidinedione analysis that have been previously identified in the literature. The specified outcomes followed extensive learning, and the most recent advances in analytical methods for the identification of pioglitazone, pioglitazone HCl, rosiglitazone, rosiglitazone maleate and lobeglitazone were reviewed. Additionally, this article briefly discusses features of analytical discovery on thiazolidinediones, which will enable readers to access all discoveries in one place with precise outcomes.

A dual-mode fluorescence and colorimetric sensing platform for efficient detection of ofloxacin in aquatic products using iron alkoxide nanozyme

Trace detection of ofloxacin (OFL) with high sensitivity, reliability, and visual clarity is challenging. To address this, a novel dual-modal aptasensor with fluorescence-colorimetric capabilities was designed that exploit the target-induced release of 3,3',5,5'-tetramethylbenzidine (TMB) molecules from aptamer-gated mesoporous silica nanoparticles (MSNs), the oxidase-like activity of iron alkoxide (IA) nanozyme, and the fluorescence attributes of core-shell upconversion nanoparticles. Therefore, the study reports a dual mode detection, with a fluorescence detection range for OFL spanning from 0.1 μg/kg to 1000 μg/kg (and a detection limit of 0.048 μg/kg). Additionally, the colorimetric method offered a linear detection range of 0.3 μg/kg to 1000 μg/kg, with a detection limit of 0.165 μg/kg. The proposed biosensor had been successfully applied to the determination of OFL content in real samples with satisfactory recoveries (78.24-96.14 %).

Application of green synthesized magnesium oxide nanoparticles to prolong commercial availability of Vitis vinifera L

The objective of the study was to extend shelf life of Vitis vinifera (L.) by the application of green synthesized Magnesium oxide nanoparticles. Aqueous leaf extract of Azadirachta indica A. juss. and various concentrations of 20 mM, 30 mM, and 40 mM solutions of Magnesium nitrate hexa hydrate salt, were used to synthesize nanoparticles of different size. The characterization of nanoparticles was done by SEM, XRD, and UV. The antimicrobial activity of MgO NPs was evaluated for Azospirilum brasilense and Trichoderma viride, representative of microbes responsible for V. vinifera fruits spoilage. Nanoparticles with crystal size of 28.60 nm has more pronounced effect against microbes. The Shelf life of the Vitis vinifera L. was evaluated by application of 28.60 nm MgO NPs through T1 (nanoparticles coated on packaging), T2 (nanoparticles coated directly on fruit) at 4 °C and 25 °C. T1 at 4 °C was effective to extend the shelf life of Vitis vinifera (L) for an average of 20 days.

Dual Direct Z-Scheme Heterojunction with Stable Electron Supply to a Au/PANI Photocathode for Ultrasensitive Photoelectrochemical and Electrochromic Visualization Detection of Ofloxacin in a Microfluidic Sensing Platform

A novel dual-mode microfluidic analytical device integrating self-powered photoelectrochemical (PEC) sensing with electrochromic visualization analysis was developed for ultrasensitive ofloxacin (OFL) detection. First, an advanced dual direct Z-scheme BiVO₄@Ni-ZnIn₂S₄/Bi₂S₃ (BVZIS) heterojunction was designed as a photoanode matrix to steadily provide electrons. The dual Z-scheme structure formed in photoactive BVZIS composites greatly accelerated the migration of electrons. In addition, the doping of Ni in ZnIn₂S₄ markedly enhanced the optical absorption and promoted the separation of the photocarrier. Second, electrochromic material polyaniline-modified Au (Au/PANI) was first electrodeposited on the photocathode for immobilizing aptamers and realizing visualized readout. On the one hand, Au/PANI with excellent conductivity could receive electrons from the photoanode without external energy supply. On the other hand, PANI would be rapidly reduced by the received electrons and change its color from blue to green obviously. With the increase in OFL, the increased steric hindrance resulted in the significant decline in the PEC signal and RGBgreen value. Third, wide linear ranges of PEC (0.05 pg/mL to 150 ng/mL) and electrochromic technique (0.1 pg/mL to 100 ng/mL) as well as low detection limits of PEC (18 fg/mL) and electrochromic (30 fg/mL) sensors could achieve the ultrasensitive detection of OFL in milk and river water.

A Turn-On–Type Fluorescence Resonance Energy Transfer Eco-friendly Method for Nitazoxanide Quantification in Pharmaceutical Dosage Form and Spiked Plasma: Evaluation of Greenness Profile Using Different Assessment Tools

A brand-new class of anti-infective drugs that work against bacteria, viruses, and protozoan parasites is nitazoxanide and related thiazolides. Thiazolides have also been shown to cause cell cycle arrest and apoptotic cell death in cancer cells in recent years. In this study, an eco-friendly, spectrofluorimetric technique that is verified, easy, and sensitive has been proposed for quantifying nitazoxanide (NTZ), a broad-spectrum antiparasitic drug. When NTZ is reduced with zinc (Zn) powder in an acidic media, a highly fluorescent product is produced. To get the highest sensitivity, different experimental conditions impacting the response were examined and optimized. Following excitation at 299 nm, scanning of the fluorescent product was done at 440 nm. The intensity of the fluorescence was proportional to the drug concentration in the range of 0.1–0.6 μg/mL. The approach was validated according to International Conference on Harmonization (ICH) guidelines, and the outcome was satisfactory. The detection and quantitation limits were calculated to be 0.013 and 0.038 μg/mL, respectively. The suggested technique was successful in analyzing commercially available NTZ dosage forms. Furthermore, the proposed technique was used to assess NTZ levels in human plasma and it was bio-analytically validated according to European Medicines Agency (EMA) guidelines. The suggested method can be used in quality control laboratories as well as in pharmacokinetic studies. In order to picture the green profile of the developed method, four greenness assessment tools have been applied. National Environmental Methods Index (NEMI), analytical Eco-Scale Assessment (ESA), Green Analytical Procedure Index (GAPI) and Analytical Greenness metric (AGREE) are the relatively most widely used metrics. So, they were utilized to perform a detailed greenness comparison between the proposed method and some of the reported methods for the determination of NTZ. The developed method was found to be an excellent green method with the highest AGREE score.

The influence mechanism of the molecular structure on the peak current and peak potential in electrochemical detection of typical quinolone antibiotics

Antibiotic pollution in water has become an increasingly serious problem, posing a potentially huge threat to human health. Ofloxacin (OFL), norfloxacin (NOR), and enoxacin (ENX) are typical broad-spectrum quinolone antibiotics, which are frequently detected in various water environments. An electrochemical sensor is a rapid and effective tool to detect antibiotics in the aquatic environment. The molecular structure of target pollutants is an important factor affecting the detection performance of electrochemical sensors. Based on the electrochemical detection results of antibiotics (OFL, NOR, and ENX), we first used the molecular structure analysis method based on quantum chemistry to accurately identify the electronegativity and the electrocatalytic degree of the oxidizable (and non-oxidizable) functional groups of pollutants. We also clarified the influence mechanism of the molecular structure on the peak current and peak potential. These results can provide theoretical support for rapidly selecting electrodes with a suitable electrochemical window to efficiently detect trace organic pollutants (such as antibiotics) in water based on the molecular structure of the target pollutant.

Designing of CuS growing on Bi2WO6 nanosheet heterostructures based on a photoelectrochemical aptasensor for detecting ofloxacin

Bi2WO6 (BW) was compounded with different contents of copper sulfide (CuS) by a two-step procedure. The chemical composition and morphology of the materials were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The results of photoelectrochemical (PEC) tests showed that CuS can improve the PEC performance of semiconductor materials and it has the best performance when the CuS mass fraction is 5%. Therefore, CuS/BW-5% nanocomposite has been constructed as ofloxacin (OFL) drug PEC aptasensors by binding of aptamer receptors. The PEC aptasensor based on CuS/BW-5% has a linear relationship for OFL of 1-12,000 nM and a determination limit of 0.35 nM. Since the photoelectron potential generated by CuS/BW-5% heterojunction reduces the combination of photogenerated electrons and holes CuS/BW-5% has a better photoelectrocatalytic performance. Graphical abstract Schematic presentation of a photoelectrochemical aptasensor based on CuS/Bi2WO6 for the determination of OFL.

New insights into the effect of pH on the mechanism of ofloxacin electrochemical detection in aqueous solution

We first found that identifying the protonation status and polarity of the target pollutant helped to rapidly find an optimal pH condition for its electrochemical detection, which promoted practical application.