Fluorescence microscopic visualization and quantification of initial bacterial colonization on enamel in situ

Extracellular host DNA contributes to pathogenic biofilm formation during periodontitis

Introduction

Periodontal diseases are known to be associated with polymicrobial biofilms and inflammasome activation. A deeper understanding of the subgingival cytological (micro) landscape, the role of extracellular DNA (eDNA) during periodontitis, and contribution of the host immune eDNA to inflammasome persistence, may improve our understanding of the mechanisms underlaying severe forms of periodontitis.

Methods

In this work, subgingival biolfilms developing on biologically neutral polyethylene terephthalate films placed in gingival cavities of patients with chronic periodontitis were investigated by confocal laser scanning microscopy (CLSM). This allowed examination of realistic cytological landscapes and visualization of extracellular polymeric substances (EPS) including amyloids, total proteins, carbohydrates and eDNA, as well as comparison with several single-strain in vitro model biofilms produced by oral pathogens such as Klebsiella pneumoniae, Pseudomonas aeruginosa, Staphylococcus aureus, Streptococcus gordonii, S. sanguinis and S. mitis. Fluorescence in situ hybridization (FISH) analysis was also used to identify eDNA derived from eubacteria, streptococci and members of the Bacteroides-Porphyromonas-Prevotella (BPP) group associated with periodontitis.

Results

Analysis of subgingival biofilm EPS revealed low levels of amyloids and high levels of eDNA which appears to be the main matrix component. However, bacterial eDNA contributed less than a third of the total eDNA observed, suggesting that host-derived eDNA released in neutrophil extracellular traps may be of more importance in the development of biofilms causing periodontitis.

Discussion

eDNA derived from host immunocompetent cells activated at the onset of periodontitis may therefore be a major driver of bacterial persistence and pathogenesis.

Impact of pH-adjusted fluoride and stannous solutions on the protective properties on the pellicle layer in vitro and in situ

This study evaluates the ideal pH for anti-erosion and anti-adherent efficacy of fluoride and stannous solutions (sodium fluoride (SF), amine fluoride (AF), sodium monofluorophosphate (SMFP), stannous fluoride (SnF2) with 500 ppm fluoride concentration each and stannous chloride (SnCl2, 1563 ppm stannous)). In vitro, solutions were tested at pH 4.5 and 5.5. The main in situ experiments were carried out at the pH of 4.5: For pellicle formation 6 volunteers wore bovine enamel slabs intraorally for 1 min, rinsed with 8 ml solution for 1 min and continued for up to 30 min/8 h. Physiological pellicle samples served as controls. After incubation in HCl (2.0, 2.3) for 2 min mineral release was determined photometrically. Bacterial counts on 8 h biofilms were determined by fluorescence microscopy (BacLight™ and DAPI with Concanavalin A). Modification of the pellicle ultrastructure was examined by TEM. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney-U tests with Bonferroni-correction (p < 0.05). SnF2 showed a significant erosion protection. AF, SnF2, and SnCl2 were most anti-adherent. SnF2 and SnCl2 caused a pronounced basal pellicle with stannous precipitates. Compared to other fluoride monosubstances, stannous ions offer greater protection against erosive acidic attacks. Stannous ions act as crucial co-factor in this process.

Biofilm formation of C. albicans on occlusal device materials and antibiofilm effects of chitosan and eugenol

STATEMENT OF PROBLEM

Microbial adhesion on occlusal devices may lead to oral diseases such as candidiasis. Whether chitosan and eugenol provide antibiofilm effects is unclear.

PURPOSE

The purpose of this in vitro study was to evaluate the biofilm formation of C. albicans strains on occlusal device materials and the antibiofilm effects of chitosan and eugenol against C. albicans on these surfaces.

MATERIAL AND METHODS

A total of 88 specimens (5×10×2 mm) were produced from occlusal device materials with 4 production techniques: vacuum-formed thermoplastic (Group V), head-press (Group H), computer-aided design and computer-aided manufacture (CAD-CAM) (Group C), and 3-dimensionally (3D) printed (Group D) (n=22). After various finishing procedures, the surface properties of the specimens were evaluated by using surface free energy (SFE), surface roughness (SR) measurements, and elemental and topographic analysis. Biofilm formation of C. albicans strain and the antibiofilm effects of chitosan and eugenol against biofilm formation on these surfaces were also examined with a crystal violet assay. The distribution's normality was statistically analyzed with the Kolmogorov-Smirnov test. One-way and two-way analysis of variance with post hoc Tukey tests were used for statistical evaluations (α=.05).

RESULTS

Surface roughness values in Groups D and H were significantly higher than in other groups (P<.05). While the highest surface free energy values (except γp) were in Group V, Group C had the highest γp. The lowest biofilm value appeared in Group H. Chitosan exhibited an antibiofilm effect in all groups except Group H, while eugenol was effective in all groups.

CONCLUSIONS

The production method affected the susceptibility of occlusal device materials to the adhesion of C. albicans. Eugenol was an effective antibiofilm agent for device materials.

Optimizing the use of low-frequency ultrasound for bacterial detachment of in vivo biofilms in dental research-a methodological study

OBJECTIVES

Low-frequency, low-intensity ultrasound is commonly utilized in various dental research fields to remove biofilms from surfaces, but no clear recommendation exists in dental studies so far. Therefore, this study aims to optimize the sonication procedure for the dental field to efficiently detach bacteria while preserving viability.

MATERIALS AND METHODS

Initial biofilm was formed in vivo on bovine enamel slabs (n = 6) which were worn by four healthy participants for 4 h and 24 h. The enamel slabs covered with biofilm were then ultrasonicated ex vivo for various time periods (0, 1, 2, 4, 6 min). Colony-forming units were determined for quantification, and bacteria were identified using MALDI-TOF. Scanning electron microscopic images were taken to also examine the efficiency of ultrasonications for different time periods.

RESULTS

Ultrasonication for 1 min resulted in the highest bacterial counts, with at least 4.5-fold number compared to the non-sonicated control (p < 0.05). Most bacteria were detached within the first 2 min of sonication, but there were still bacteria detached afterwards, although significantly fewer (p < 0.0001). The highest bacterial diversity was observed after 1 and 2 min of sonication (p < 0.03). Longer sonication periods negatively affected bacterial counts of anaerobes, Gram-negative bacteria, and bacilli. Scanning electron microscopic images demonstrated the ability of ultrasound to desorb microorganisms, as well as revealing cell damage and remaining bacteria.

CONCLUSIONS

With the use of low-frequency, low-intensity ultrasound, significantly higher bacterial counts and diversity can be reached. A shorter sonication time of 1 min shows the best results overall.

CLINICAL RELEVANCE

This standardization is recommended to study initial oral biofilms aged up to 24 h to maximize the outcome of experiments and lead to better comparability of studies.

The combinatorial applications of 1,4-naphthoquinone and tryptophan inhibit the biofilm formation of Staphylococcus aureus

Microorganisms embedded within an extracellular polymeric matrix are known as biofilm. The extensive use of antibiotics to overcome the biofilm-linked challenges has led to the emergence of multidrug-resistant strains. Staphylococcus aureus is one such nosocomial pathogen that is known to cause biofilm-linked infections. Thus, novel strategies have been adopted in this study to inhibit the biofilm formation of S. aureus. Two natural compounds, namely, 1,4-naphthoquinone (a quinone derivative) and tryptophan (aromatic amino acid), have been chosen as they could independently show efficient antibiofilm activity. To enhance the antibiofilm potential, the two compounds were combined and tested against the same organism. Several experiments like crystal violet (CV) assay, protein estimation, extracellular polymeric substance (EPS) extraction, and estimation of metabolic activity confirmed that the combination of the two compounds could significantly inhibit the biofilm formation of S. aureus. To comprehend the underlying mechanism, efforts were further directed to understand whether the two compounds could inhibit biofilm formation by compromising the cell surface hydrophobicity of the bacteria. The results revealed that the cell surface hydrophobicity got reduced by ~ 49% when the compounds were applied together. Thus, the combinations could show enhanced antibiofilm activity by attenuating cell surface hydrophobicity. Further studies revealed that the selected concentrations of the compounds could disintegrate (~ 70%) the pre-existing biofilm of the test bacteria without showing any antimicrobial activity. Hence, the combined application of tryptophan and 1,4-naphthoquinone could be used to inhibit the biofilm threats of S. aureus.

Social networking at the microbiome-host interface

Microbial species colonizing host ecosystems in health or disease rarely do so alone. Organisms conglomerate into dynamic heterotypic communities or biofilms in which interspecies and interkingdom interactions drive functional specialization of constituent species and shape community properties, including nososymbiocity or pathogenic potential. Cell-to-cell binding, exchange of signaling molecules, and nutritional codependencies can all contribute to the emergent properties of these communities. Spatial constraints defined by community architecture also determine overall community function. Multilayered interactions thus occur between individual pairs of organisms, and the relative impact can be determined by contextual cues. Host responses to heterotypic communities and impact on host surfaces are also driven by the collective action of the community. Additionally, the range of interspecies interactions can be extended by bacteria utilizing host cells or host diet to indirectly or directly influence the properties of other organisms and the community microenvironment. In contexts where communities transition to a dysbiotic state, their quasi-organismal nature imparts adaptability to nutritional availability and facilitates resistance to immune effectors and, moreover, exploits inflammatory and acidic microenvironments for their persistence.

Sensors for Biomass Monitoring in Vegetated Green Infrastructure: A Review

Bioretention cells, or rain gardens, can effectively reduce many contaminants in polluted stormwater through phytoremediation and bioremediation. The vegetated soil structure develops bacterial communities both within the soil and around the vegetation roots that play a significant role in the bioremediative process. Prediction of a bioretention cell's performance and efficacy is essential to the design process, operation, and maintenance throughout the design life of the cell. One of the key hurdles to these important issues and, therefore, to appropriate designs, is the lack of effective and inexpensive devices for monitoring and quantitatively assessing this bioremediative process in the field. This research reviews the available technologies for biomass monitoring and assesses their potential for quantifying bioremediative processes in rain gardens. The methods are discussed based on accuracy and calibration requirements, potential for use in situ, in real-time, and for characterizing biofilm formation in media that undergoes large fluctuations in nutrient supply. The methods discussed are microscopical, piezoelectric, fiber-optic, thermometric, and electrochemical. Microscopical methods are precluded from field use but would be essential to the calibration and verification of any field-based sensor. Piezoelectric, fiber-optic, thermometric, and some of the electrochemical-based methods reviewed come with limitations by way of support mechanisms or insufficient detection limits. The impedance-based electrochemical method shows the most promise for applications in rain gardens, and it is supported by microscopical methods for calibration and validation.

Olive Oil as a Transport Medium for Bioactive Molecules of Plants?-An In Situ Study

(1) Caries and erosions still remain a challenge for preventive dentistry. Certain plant extracts have shown beneficial effects in preventive dentistry. The aim of this study was to evaluate the antibacterial, anti-adherent and erosion-protective properties of ellagic acid (EA) as a polyphenolic agent. The combination with olive oil was investigated additionally to verify a possible improved bioactive effect of EA. (2) An in situ study was carried out with six subjects. Individual splints were prepared with bovine enamel specimens. The splints were worn for 1 min (pellicle formation time). Thereafter, 10 min rinses were performed with EA in water/in oil. Bacterial adherence was evaluated by fluorescence microscopy (DAPI, ConA, BacLight) after an 8 h oral exposition time. Additionally, the splints were worn for 30 min to quantify demineralization processes. The ultrastructure of the pellicle was investigated after an oral exposure time of 2 h under a transmission electron microscope. Statistical analysis was performed by Kruskal-Wallis tests, Mann-Whitney U tests and Bonferroni-Holm correction. (3) Rinsing with EA led to a significant reduction of adherent vital and dead bacteria. The combination with olive oil did not improve these outcomes. The assessment of glucan structures after rinsing with EA in water showed significant effects. Significant differences were observed for both rinses in calcium release at pH 3.0. After rinsing with EA in oil, significantly less calcium was released compared to rinsing with EA in water (pH = 3.0). (4) Olive oil is not suitable as a transport medium for lipophilic polyphenols. EA has anti-adherent and antibacterial properties in situ. EA also shows erosion-protective effects, which can be enhanced in combination with olive oil depending on the pH value. Ellagic acid has a neutral pH and could be an opportunity in the treatment of specific patient groups (xerostomia or mucositis).

Simultaneous Chemical Mapping of Live Biofilm Microenvironmental pH and Hydrogen Peroxide in Real Time with a Triple Scanning Electrochemical Microscopy Tip

Dental plaque biofilm is a complex ecosystem. The distribution of microbial species in the biofilm is heavily influenced by local chemical interactions that result from diverse metabolic activities and the nature of the released molecules. As a relevant example, H2O2-producing bacteria can antagonize disease-associated bacteria, leading to the maintenance of a healthy oral microbiome. Herein, we report the development of a triple-sensor (redox, pH, and H2O2) scanning electrochemical microscopy (SECM) tip capable of simultaneously mapping the pH and H2O2 concentration produced by a dental plaque-derived multispecies biofilm grown on hydroxyapatite. The pH sensor of the triple SECM tip showed a near Nernstian slope of -71.1 ± 2 mV/pH (N = 3), whereas the H2O2 sensor showed a slope of -0.052 ± 0.002 nA/μM H2O2 at pH 7.2 and a detection limit of 1.0 ± 0.2 μM (N = 7). There is no significant difference in the sensitivities of H2O2 sensors at pH 6.2, 7.2, and 8.2 at 95% CI (N = 7). The pH and H2O2 sensors demonstrated excellent reversibility with response times of 3 and 5 s, respectively, along with reliable stability over 4 h at 37 °C. The sensors did not show any cross talk between pH and H2O2 concentration ([H2O2]) measurements, highlighting the accuracy and versatility of the SECM tip. Simultaneous chemical imaging of pH and [H2O2] across the biofilm revealed a clustered distribution of local H2O2 concentrations, ranging from 0 to 17 μM. Conversely, the local pH remained constant at 7.2. The relation of local chemical profiles and the distribution of bacterial species within the oral microbiome was experimentally investigated in the context of bacterial H2O2 antagonism. The benefit of clustered H2O2 production was that the total area of H2O2 produced by smaller clusters was 67% more than that of a single cluster with the same starting number of bacteria. Thus, this triple SECM tip can potentially be used to study local molecular mechanisms that result in dysbiosis of the oral microbiome.

Efficacy of Endodontic Disinfection Protocols in an E. faecalis Biofilm Model-Using DAPI Staining and SEM

The aim of this study was to investigate the antimicrobial efficacy of different disinfection protocols in a novel Enterococcus faecalis biofilm model based on a visualization method and to evaluate the potential alteration of dentinal surface. A total of 120 extracted human premolars were allocated to 6 groups with different irrigation protocols. The assessment of the effectiveness of each protocol and the alteration of dentinal surface were visualized by using SEM and fluorescence microscopy (DAPI). A dense E. faecalis biofilm with a penetration depth of 289 μm (medial part of the root canal) and 93 μm (apical part) validated that the biofilm model had been successfully implemented. A significant difference between the 3% NaOCl groups and all the other groups in both observed parts of the root canal (p < 0.05) was detected. However, the SEM analysis revealed that the dentinal surface in the 3% NaOCl groups was severely altered. The established biofilm model and the visualization method based on DAPI are appropriate for bacterial quantification and evaluation of the depth effect of different disinfection protocols in the root canal system. The combination of 3% NaOCl with 20% EDTA or MTAD with PUI allows the decontamination of deeper dentine zones within the root canal but simultaneously alters the dentinal surface.

Direct and indirect effects of different dentifrices on the initial bacterial colonization of enamel in situ overnight

OBJECTIVE

The aim of this study was to investigate the direct and indirect influence of fluoridated toothpastes and fluoride-free toothpaste with hydroxyapatite (HAP) as active ingredient on initial bacterial colonization on enamel in situ.

METHODS

For this clinical-experimental pilot study, eight subjects were instructed to brush their teeth with three different toothpastes (Elmex^® : 1400 ppm AmF, Meridol^® : 1400 ppm AmF +SnF2, Karex^® : HAP), using each for two consecutive days. As a control, brushing without toothpaste was performed. To evaluate bacterial colonization, subject wore splints with buccally placed bovine enamel platelets overnight. Two modes were tested. In a first pass (regimen A), the splints were inserted after toothbrushing to examine the indirect effects of the dentifrices. In order to investigate the direct effects, the specimens were brushed in situ in a second pass (regimen B). Biofilm formation was visualized and quantified using fluorescence microscopy (DAPI and BacLight) and transmission electron microscopy (TEM).

RESULTS

For brushing regimen A (indirect effect of dentifrices), no statistical differences were detected between any of the tested dentifrices or the control. Likewise, no statistically significant differences were recorded for brushing regimen B (direct effect of dentifrices). Furthermore, no differences between the different brushing techniques were determined with regard to the ultrastructure of the overnight biofilm.

CONCLUSION

Within the limitations of the present pilot study, it can be concluded that in patients with good oral hygiene, dentifrices and their chemical composition have no statistically significant effect on the initial bacterial colonization of enamel platelets in situ, irrespectively of the mode of application.

Understanding the Predictive Potential of the Oral Microbiome in the Development and Progression of Early Childhood Caries

BACKGROUND

Early childhood caries (ECC) is the most common chronic disease in young children and a public health problem worldwide. It is characterized by the presence of atypical and fast progressive caries lesions. The aggressive form of ECC, severe early childhood caries (S-ECC), can lead to the destruction of the whole crown of most of the deciduous teeth and cause pain and sepsis, affecting the child's quality of life. Although the multifactorial etiology of ECC is known, including social, environmental, behavioral, and genetic determinants, there is a consensus that this disease is driven by an imbalance between the oral microbiome and host, or dysbiosis, mediated by high sugar consumption and poor oral hygiene. Knowledge of the microbiome in healthy and caries status is crucial for risk monitoring, prevention, and development of therapies to revert dysbiosis and restore oral health. Molecular biology tools, including next-generation sequencing methods and proteomic approaches, have led to the discovery of new species and microbial biomarkers that could reveal potential risk profiles for the development of ECC and new targets for anti-caries therapies. This narrative review summarized some general aspects of ECC, such as definition, epidemiology, and etiology, the influence of oral microbiota in the development and progression of ECC based on the current evidence from genomics, transcriptomic, proteomic, and metabolomic studies and the effect of antimicrobial intervention on oral microbiota associated with ECC.

CONCLUSION

The evaluation of genetic and proteomic markers represents a promising approach to predict the risk of ECC before its clinical manifestation and plan efficient therapeutic interventions for ECC in its initial stages, avoiding irreversible dental cavitation.

Biodentine Inhibits the Initial Microbial Adhesion of Oral Microbiota In Vivo

This study aimed to evaluate the in vivo initial microbial adhesion of oral microorganisms on the biomaterial Biodentine compared to MTA and AH Plus. Cylindrical samples of the materials were prepared, and dentin slabs served as a control. An individual intraoral lower jaw splint served as a carrier for the samples and was worn by six volunteers. The specimens were worn for 120 min. Adherent bacteria were quantified by determining the colony-forming units (CFUs), while the visualization and quantification of total adherent microorganisms were facilitated by using DAPI and live/dead staining combined with fluorescence microscopy. Bovine dentin had a significantly higher number of aerobic CFUs compared to Biodentine (p = 0.017) and MTA (p = 0.013). The lowest amounts of DAPI-stained adherent microorganisms were quantified for Biodentine (15% ± 9%) and the control (18% ± 9%), while MTA showed the highest counts of initially adherent microorganisms (38% ± 10%). Significant differences were found for MTA and Biodentine (p = 0.004) as well as for MTA and the control (p = 0.021) and for AH Plus and the control (p = 0.025). Biodentine inhibited microbial adherence, thereby yielding an antimicrobial effectivity similar to that of MTA.

Preventing Peri-implantitis: The Quest for a Next Generation of Titanium Dental Implants

Titanium and its alloys are frequently the biomaterial of choice for dental implant applications. Although titanium dental implants have been utilized for decades, there are yet unresolved issues pertaining to implant failure. Dental implant failure can arise either through wear and fatigue of the implant itself or peri-implant disease and subsequent host inflammation. In the present report, we provide a comprehensive review of titanium and its alloys in the context of dental implant material, and how surface properties influence the rate of bacterial colonization and peri-implant disease. Details are provided on the various periodontal pathogens implicated in peri-implantitis, their adhesive behavior, and how this relationship is governed by the implant surface properties. Issues of osteointegration and immunomodulation are also discussed in relation to titanium dental implants. Some impediments in the commercial translation for a novel titanium-based dental implant from "bench to bedside" are discussed. Numerous in vitro studies on novel materials, processing techniques, and methodologies performed on dental implants have been highlighted. The present report review that comprehensively compares the in vitro, in vivo, and clinical studies of titanium and its alloys for dental implants.

On the Pathogenicity of the Oral Biofilm: A Critical Review from a Biological, Evolutionary, and Nutritional Point of View

Plaque control is one of the most recommended approaches in the prevention and therapy of caries and periodontal diseases. However, although most individuals in industrialized countries already perform daily oral hygiene, caries and periodontal diseases still are the most common diseases of mankind. This raises the question of whether plaque control is really a causative and effective approach to the prevention of these diseases. From an evolutionary, biological, and nutritional perspective, dental biofilms have to be considered a natural phenomenon, whereas several changes in human lifestyle factors during modern evolution are not “natural”. These lifestyle factors include the modern “Western diet” (rich in sugar and saturated fats and low in micronutrients), smoking, sedentary behavior, and continuous stress. This review hypothesizes that not plaque itself but rather these modern, unnatural lifestyle factors are the real causes of the high prevalence of caries and periodontal diseases besides several other non-communicable diseases. Accordingly, applying evolutionary and lifestyle medicine in dentistry would offer a causative approach against oral and common diseases, which would not be possible with oral hygiene approaches used on their own.

Assessing Microbial Monitoring Methods for Challenging Environmental Strains and Cultures

This paper focuses on the comparison of microbial biomass increase (cell culture growth) using field-relevant testing methods and moving away from colony counts. Challenges exist in exploring the antimicrobial growth of fastidious strains, poorly culturable bacteria and bacterial communities of environmental interest. Thus, various approaches have been explored to follow bacterial growth that can be efficient surrogates for classical optical density or colony-forming unit measurements. Here, six species grown in pure culture were monitored using optical density, ATP assays, DNA concentrations and 16S rRNA qPCR. Each of these methods have different advantages and disadvantages concerning the measurement of growth and activity in complex field samples. The species used as model systems for monitoring were: Acetobacterium woodii, Bacillus subtilis, Desulfovibrio vulgaris, Geoalkalibacter subterraneus, Pseudomonas putida and Thauera aromatica. All four techniques were found to successfully measure and detect cell biomass/activity differences, though the shape and accuracy of each technique varied between species. DNA concentrations were found to correlate the best with the other three assays (ATP, DNA concentrations and 16S rRNA-targeted qPCR) and provide the advantages of rapid extraction, consistency between replicates and the potential for downstream analysis. DNA concentrations were determined to be the best universal monitoring method for complex environmental samples.

A critical analysis of research methods and experimental models to study irrigants and irrigation systems

Irrigation plays an essential role in root canal treatment. The purpose of this narrative review was to critically appraise the experimental methods and models used to study irrigants and irrigation systems and to provide directions for future research. Studies on the antimicrobial effect of irrigants should use mature multispecies biofilms grown on dentine or inside root canals and should combine at least two complementary evaluation methods. Dissolution of pulp tissue remnants should be examined in the presence of dentine and, preferably, inside human root canals. Micro-computed tomography is currently the method of choice for the assessment of accumulated dentine debris and their removal. A combination of experiments in transparent root canals and numerical modeling is needed to address irrigant penetration. Finally, models to evaluate irrigant extrusion through the apical foramen should simulate the periapical tissues and provide quantitative data on the amount of extruded irrigant. Mimicking the in vivo conditions as close as possible and standardization of the specimens and experimental protocols are universal requirements irrespective of the surrogate endpoint studied. Obsolete and unrealistic models must be abandoned in favour of more appropriate and valid ones that have more direct application and translation to clinical Endodontics.

Antibacterial Activity and Biofilm Inhibition of New-Generation Hybrid/Fluoride-Releasing Restorative Materials

The antibacterial activity, and the effect of the application of additional topical fluoride on the bacterial activity, biofilm formation, and surface roughness of new-generation hybrid/fluoride-releasing materials were investigated. Two hundred and forty specimens were prepared in split Teflon molds (8 × 2 mm) from a resin composite (as negative control: G-aenial A’Chord/GC), Equia Forte HT Fil(GC), Equia Forte HT Fil+Equia Forte Coat, Riva Self-Cure (SDI), Riva Self-Cure+Equia Forte Coat, Zirconomer (Shofu), Beautifil II (Shofu), and Riva Silver (Shofu). Penicillin G,1U was used as positive control. The antibacterial activity was evaluated by the agar diffusion test immediately after the materials set using Streptococcus mutans (S. mutans) and Lactobacillus casei (L. casei), and repeated after application of 0.20% w/w (900 ppm) topical fluoride. The biofilm formation of S. mutans on each material was quantified by crystal violet staining. Surface roughness of the specimens was measured by a profilometer. The data were analyzed by Kruskal–Wallis, Dunn’s, one-way ANOVA, and Tukey’s HSD tests (p < 0.05). None of the tested restorative materials showed antibacterial activity and no inhibition zones were observed after treatment of the restoratives with additional topical fluoride. There were significant differences among the groups in terms of biofilm formation (p < 0.005). Equia Forte HT Fil with and without coating showed the lowest, while Riva self-cure without coating and Zirconomer showed the highest biofilm accumulation. None of the new-generation hybrid/fluoride-releasing materials demonstrated antibacterial activity and additional topical fluoride application did not make any change. Biofilm formation of the tested materials differed. All tested materials showed different surface roughness values (p < 0.005). Characteristics and compositions of the materials seemed to be more effective than the surface roughness.

The antimicrobial effect of Rosmarinus officinalis extracts on oral initial adhesion ex vivo

Objective

In the last few decades, there has been a growing worldwide interest in the use of plant extracts for the prevention of oral diseases. The main focus of this interest lies in the identification and isolation of substances that limit the formation of microbial biofilm which plays a major role in the development of caries, periodontitis, and peri-implantitis. In this clinical ex vivo study, we investigated the antimicrobial effects of Rosmarinus officinalis extract against oral microorganisms within in situ initial oral biofilms.

Materials and methods

Initial in situ biofilm samples (2 h) from six healthy volunteers were treated ex vivo with R. officinalis extract at concentrations of 20 mg/ml and 30 mg/ml. The number of viable bacterial cells was determined by counting the colony-forming units. All surviving bacteria were isolated in pure cultures and identified using MALDI-TOF and biochemical testing procedures. Additionally, live/dead staining in combination with epifluorescence microscopy was used for visualizing the antimicrobial effects in the initial biofilms.

Results

The number of colony-forming units in the R. officinalis–treated biofilms was significantly lower than in the untreated controls (p < 0.001). The reduction range of log10 was 1.64–2.78 and 2.41–3.23 for aerobic and anaerobic bacteria, respectively. Regarding the bacterial composition, large intra- and interindividual variability were observed. Except for Campylobacter spp., the average amount of all bacterial taxa was lower after treatment with R. officinalis than in the untreated biofilms. A total of 49 different species were detected in the untreated biofilms, while only 11 bacterial species were detected in the R. officinalis–treated biofilms. Live/dead staining confirmed that the R. officinalis–treated biofilms had significantly lower numbers of surviving bacteria than the untreated biofilms.

Conclusions

The treatment with R. officinalis extract has a significant potential to eliminate microbial oral initial biofilms.

Clinical relevance

The results of this study encourage the use of R. officinalis extracts in biofilm control and thus in the treatment of caries and periodontitis as a herbal adjuvant to synthetic substances.

Antimicrobial Effects of Inula viscosa Extract on the In Situ Initial Oral Biofilm

Given the undesirable side effects of commercially used mouth rinses that include chemically synthesized antimicrobial compounds such as chlorhexidine, it is essential to discover novel antimicrobial substances based on plant extracts. The aim of this study was to examine the antimicrobial effect of Inula viscosa extract on the initial microbial adhesion in the oral cavity. Individual test splints were manufactured for the participants, on which disinfected bovine enamel samples were attached. After the initial microbial adhesion, the biofilm-covered oral samples were removed and treated with different concentrations (10, 20, and 30 mg/mL) of an I. viscosa extract for 10 min. Positive and negative controls were also sampled. Regarding the microbiological parameters, the colony-forming units (CFU) and vitality testing (live/dead staining) were examined in combination with fluorescence microscopy. An I. viscosa extract with a concentration of 30 mg/mL killed the bacteria of the initial adhesion at a rate of 99.99% (log₁₀ CFU value of 1.837 ± 1.54). Compared to the negative control, no killing effects were determined after treatment with I. viscosa extract at concentrations of 10 mg/mL (log₁₀ CFU value 3.776 ± 0.831; median 3.776) and 20 mg/mL (log₁₀ CFU value 3.725 ± 0.300; median 3.711). The live/dead staining revealed a significant reduction (p < 0.0001) of vital adherent bacteria after treatment with 10 mg/mL of I. viscosa extract. After treatment with an I. viscosa extract with a concentration of 30 mg/mL, no vital bacteria could be detected. For the first time, significant antimicrobial effects on the initial microbial adhesion in in situ oral biofilms were reported for an I. viscosa extract.

The Influence of Modified Experimental Dental Resin Composites on the Initial In Situ Biofilm-A Triple-Blinded, Randomized, Controlled Split-Mouth Trial

The purpose of the study was to investigate the bacterial viability of the initial biofilm on the surface of experimental modified dental resin composites. Twenty-five healthy individuals with good oral hygiene were included in this study. In a split-mouth design, they received acrylic splints with five experimental composite resin specimens. Four of them were modified with either a novel polymeric hollow-bead delivery system or methacrylated polymerizable Irgasan (Antibacterial B), while one specimen served as an unmodified control (ST). A delivery system based on Poly-Pore^® was loaded with one of the active agents: Tego^® Protect 5000 (Antiadhesive A), Dimethicone (Antiadhesive B), or Irgasan (Antibacterial A). All study subjects refrained from toothbrushing during the study period. Specimens were detached from the splints after 8 h and given a live/dead staining before fluorescence microscopy. A Friedman test and a post hoc Nemenyi test were applied with a significance level at p < 0.05. In summary, all materials but Antibacterial B showed a significant antibacterial effect compared to ST. The results suggested the role of the materials’ chemistry in the dominance of cell adhesion. In conclusion, dental resin composites with Poly-Pore-loaded active agents showed antibacterial effectiveness in situ.

The dentin pellicle - A neglected topic in dental research

OBJECTIVE

All soft and solid surfaces exposed to the oral cavity are covered by an acquired pellicle. While the pellicle adsorbed on enamel is well researched, only limited data are available on the dentin pellicle. The purpose of the present review is to summarize studies considering the composition, structure and properties of the dentin pellicle and compare them with the current state of research on enamel pellicle.

METHODS

The literature search was conducted using Medline database and Google Scholar, including checking reference lists of journal articles by handsearching. Thereby, 19 studies were included in the present review.

RESULTS AND CONCLUSION

The dentin pellicle has a similar ultrastructure to the enamel pellicle, which is up to 1 μm thick depending on pellicle formation time and localization in the oral cavity. In contrast, due to the lack of studies on the dentin pellicle regarding its composition and properties, a comparison to the enamel pellicle is difficult. So far, only one study showed anti-abrasive properties and data on anti-erosive properties were controversial. Despite becoming more and more clinically relevant due to the increasing frequency of dentin exposure, the dentin pellicle is largely unexplored. For further investigations it is not only necessary to standardize dentin specimens, but also to assess fundamental research on dentin itself, as its complex morphology and composition may have a crucial influence on pellicle formation. Furthermore, a more detailed knowledge of the dentin pellicle may also reveal target sites for modification in favor of its protective properties.

How Do Polymer Coatings Affect the Growth and Bacterial Population of a Biofilm Formed by Total Human Salivary Bacteria?-A Study by 16S-RNA Sequencing

Antimicrobial surface modifications are required to prevent biomaterial-associated biofilm infections, which are also a major concern for oral implants. The aim of this study was to evaluate the influence of three different coatings on the biofilm formed by human saliva. Biofilms grown from human saliva on three different bioactive poly(oxanorbornene)-based polymer coatings (the protein-repellent PSB: poly(oxanorbornene)-based poly(sulfobetaine), the protein-repellent and antimicrobial PZI: poly(carboxyzwitterion), and the mildly antimicrobial and protein-adhesive SMAMP: synthetic mimics of antimicrobial peptides) were analyzed and compared with the microbial composition of saliva, biofilms grown on uncoated substrates, and biofilms grown in the presence of chlorhexidine digluconate. It was found that the polymer coatings significantly reduced the amount of adherent bacteria and strongly altered the microbial composition, as analyzed by 16S RNA sequencing. This may hold relevance for maintaining oral health and the outcome of oral implants due to the existing synergism between the host and the oral microbiome. Especially the reduction of some bacterial species that are associated with poor oral health such as Tannerella forsythia and Fusobacterium nucleatum (observed for PSB and SMAMP), and Prevotella denticola (observed for all coatings) may positively modulate the oral biofilm, including in situ.

Effect of different beverages on surface properties and cariogenic biofilm formation of composite resin materials

The consumption of certain beverages may affect the physical and biological properties of resin composites (RCs) according to type. This in vitro study aimed to evaluate the surface properties and cariogenic biofilm formation in microhybrid and nanohybrid RCs after immersion in different beverages. The effects of four beverages (distilled water-control, tea, coffee, and cola) on two RCs (microhybrid and nanohybrid) were evaluated. Changes in the surface properties were evaluated for each group using surface roughness measurement (n = 10), scanning electron microscopy (SEM) (n = 4) observation, and energy-dispersive X-ray spectroscopy (EDX) (n = 5) analysis. In vitro Streptococcus mutans biofilm formation on the specimens of each group was determined using confocal laser scanning microscopy and SEM analysis (n = 14). The data were analyzed using two-way analysis of variance, with Bonferroni as a post-hoc test and Pearson's correlation (p < .05). Microhybrid RC presented more surface roughness (p = .014) and cariogenic biofilm formation (p = .040). The surface roughness (F = 0.733, p = .536) and cariogenic biofilm formation (F = 1.685, p = .181) values were not affected by the beverages. However, according to qualitative SEM and EDX measurements, these parameters varied depending on the beverage groups. No correlation was found between surface roughness and cariogenic biofilm formation (r = 0.135, p = .287). Microhybrid RCs had a rougher surface and a higher amount of cariogenic biofilm formation than nanohybrid RCs after being subjected to different beverages.

Influence of the Manufacturing Method on the Adhesion of Candida albicans and Streptococcus mutans to Oral Splint Resins

Microbial adhesion to oral splints may lead to oral diseases such as candidiasis, periodontitis or caries. The present in vitro study aimed to assess the effect of novel computer-aided design/computer-aided manufacturing (CAD/CAM) and conventional manufacturing on Candida albicans and Streptococcus mutans adhesion to oral splint resins. Standardized specimens of four 3D-printed, two milled, one thermoformed and one pressed splint resin were assessed for surface roughness by widefield confocal microscopy and for surface free energy by contact angle measurements. Specimens were incubated with C. albicans or S. mutans for two hours; a luminometric ATP assay was performed for the quantification of fungal and bacterial adhesion. Both one-way ANOVA with Tukey post hoc testing and Pearson correlation analysis were performed (p < 0.05) in order to relate manufacturing methods, surface roughness and surface free energy to microbial adhesion. Three-dimensional printing and milling were associated with increased adhesion of C. albicans compared to conventional thermoforming and pressing, while the S. mutans adhesion was not affected. Surface roughness and surface free energy showed no significant correlation with microbial adhesion. Increased fungal adhesion to oral splints manufactured by 3D printing or milling may be relevant for medically compromised patients with an enhanced risk for developing candidiasis.

Long-Term Use of Oral Hygiene Products Containing Stannous and Fluoride Ions: Effect on Viable Salivary Bacteria

The aim of this randomized, controlled clinical trial was to isolate and identify viable microorganisms in the saliva of study participants that continuously used a stannous and fluoride ion (F/Sn)-containing toothpaste and mouth rinse over a period of three years in comparison to a control group that used stannous ion free preparations (noF/Sn) over the same time period. Each group (F/Sn and noF/Sn) included 16 participants that used the respective oral hygiene products over a 36-month period. Stimulated saliva samples were collected at baseline (T0) and after 36 months (T1) from all participants for microbiological examination. The microbial composition of the samples was analyzed using culture technique, matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry, and 16S rDNA Polymerase Chain Reaction (PCR). There were only minor differences between both groups when comparing the absolute values of viable microbiota and bacterial composition. The treatment with F/Sn led to a slight decrease in disease-associated and a slight increase in health-associated bacteria. It was shown that the use of stannous ions had no negative effects on physiological oral microbiota even after prolonged use. In fact, a stabilizing effect of the oral hygiene products containing stannous ions on the health-associated oral microbiota could be expected.

Evaluation of surface characteristic and bacterial adhesion of low-shrinkage resin composites

This study aimed to examine the surface characteristics of low shrinkage composites and adhesion of Streptococcus mutans and Streptococcus mitis to these materials. Control material (glass) and three low shrinkage composites (Charisma Diamond, Kalore GC, Beatiful II LS) were used. After polishing procedure was applied to composite specimens, surface roughness (SR), surface free energy (SFE), and contact angle measurements were performed. Surfaces of composite were analyzed using scanning electron microscope and energy-dispersive X-ray spectroscopy. After pellicle formation with artificial saliva, S. mutans and S. mitis biofilms were incubated in 5% CO₂ for 24 h at 37°C and were analyzed using confocal laser scanning microscopy. The lowest SR and highest SFE values were found in the control group. While the contact angle of control was statistically lower than composites, statistically difference was not found between composite groups. S. mutans adhesion of composites was significantly lower than control group, but there was no significant difference between composites. S. mitis adhesion of all groups was statistically similar. SR did not affect the S. mutans and S. mitis adhesion. Less adherence of S. mutans to low shrinkage composites was associated with low SFE and high contact angle values. Even though the highest SR was observed in the Charisma Diamond, no difference was found between the composites in terms of bacterial adhesion.

Antifungal and Surface Properties of Chitosan-Salts Modified PMMA Denture Base Material

Chitosan (CS) and its derivatives show antimicrobial properties. This is of interest in preventing and treating denture stomatitis, which can be caused by fungi. Therefore, the aim of this study was the development of a novel antifungal denture base material by modifying polymethyl methacrylate (PMMA) with CS-salt and characterizing its antifungal and surface properties in vitro. For this purpose, the antifungal effect of chitosan-hydrochloride (CS-HCl) or chitosan-glutamate (CS-G) as solutions in different concentrations was determined. To obtain modified PMMA resin specimens, the CS-salts were added to the PMMA before polymerization. The roughness of these specimens was measured by contact profilometry. For the evaluation of the antifungal properties of the CS-salt modified resins, a C. albicans biofilm assay on the specimens was performed. As solutions, both the CS-G and CS-HCl-salt had an antifungal effect and inhibited C. albicans growth in a dose-dependent manner. In contrast, CS-salt modified PMMA resins showed no significant reduced C. albicans biofilm formation. Furthermore, the addition of CS-salts to PMMA significantly increased the surface roughness of the specimens. This study shows that despite the antifungal effect of CS-salts in solution, a modification of PMMA resin with these CS-salts does not improve the antifungal properties of PMMA denture base material.

Modification of in situ Biofilm Formation on Titanium by a Hydroxyapatite Nanoparticle-Based Solution

Oral biofilms play an essential role on peri-implant disease development. Synthetic hydroxyapatite nanoparticles (nHAP) are a bioinspired material that has structural and functional similarities to dental enamel apatite and may provide preventive properties against biofilm formation. This study aimed to investigate the effects of an experimental nHAP solution on biofilm formation on polished and non-polished titanium under oral conditions. Five volunteers carried maxillary splints with non-polished and polished titanium and followed a 48 h rinsing protocol with the proposed nHAP solution, and with chlorhexidine 0.2% (CHX) and water, as controls. Samples were analyzed by fluorescence microscopy (FM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). FM showed a significant reduction of biofilms on polished samples treated with nHAP (p = 0.0485) compared with water, without differences between nHAP and CHX (p > 0.9999). Analyzing biofilm viability, polished samples rinsed with nHAP showed significantly fewer dead bacteria than CHX (p = 0.0079), but there was no significant difference in viability between polished samples rinsed with water and nHAP (p = 0.9268). A significantly higher biofilm coverage was observed on the non-polished surfaces compared to the polished surfaces when nHAP was applied (p = 0.0317). This difference between polished and non-polished surfaces was not significant when water (p = 0.1587) or CHX (p = 0.3413) rinsing were applied. SEM and TEM analysis supported the FM findings, that polished samples rinsed with nHAP presented fewer biofilm coverage compared to samples rinsed with water. In conclusion, the nHAP solution reduced the biofilm formation on polished Ti surfaces without altering bacterial viability, providing a novel approach for the management of biofilm formation on biomaterials.

Effect of a Er, Cr:YSGG laser and a Er:YAG laser treatment on oral biofilm-contaminated titanium

OBJECTIVE

Implant surface decontamination is a challenging procedure for therapy of peri-implant disease. This study aimed to compare the effectiveness of decontamination on oral biofilm-contaminated titanium surfaces in Er:YAG laser, Er, Cr:YSGG laser, and plastic curette.

METHODOLOGY

For oral biofilms formation, six participants wore an acrylic splint with eight titanium discs in the maxillary arch for 72 hours. A total of 48 contaminated discs were distributed among four groups: untreated control; decontamination with plastic curettes; Er, Cr:YSGG laser; and Er:YAG laser irradiation. Complete plaque removal was estimated using naked-eye and the time taken was recorded; the residual plaque area was measured and the morphological alteration of the specimen surface was observed by scanning electron microscopy. The total bacterial load and the viability of adherent bacteria were quantified by live or dead cell labeling with fluorescence microscopy.

RESULTS

The mean treatment time significantly decreased based on the treatment used in the following order: Er:YAG, Er, Cr:YSGG laser, and plastic curettes (234.9±25.4 sec, 156.1±12.7 sec, and 126.4±18.6 sec, P=0.000). The mean RPA in the Er, Cr:YSGG laser group (7.0±2.5%) was lower than Er:YAG and plastic curettes groups (10.3±2.4%, 12.3±3.6%, p=0.023). The viable bacteria on the titanium surface after Er, Cr:YSGG laser irradiation was significantly lower compared to the decontamination with plastic curette (P=0.05) but it was not significantly different from the Er:YAG laser irradiation.

CONCLUSION

We found that Er:YAG laser and Er, Cr:YSGG laser irradiation were effective methods for decontaminations without surface alterations.

Effects of Experimental Agents Containing Tannic Acid or Chitosan on the Bacterial Biofilm Formation in Situ

Chitosan and tannic acid are known for their antibacterial properties. In the present in-situ study, their antibacterial and anti-adherent effects on biofilm formation on enamel were investigated. Six subjects carried upper jaw splints with bovine enamel specimens, allowing in-situ biofilm formation. During the two-day trial, subjects rinsed with experimental solutions that contained either chitosan, tannic acid (pH = 2.5), tannic acid (pH = 7) or hydrochloric acid. Water served as the negative and chlorhexidine as the positive control. Rinsing occurred four or five times following two different rinsing protocols to investigate both the immediate and long-lasting effects. After 48 h of intraoral exposure, the dental plaque was stained with LIVE/DEAD^® BacLight, and fluorescence micrographs were evaluated by using the software ImageJ. The results were verified by scanning electron microscopy. Rinsing with chitosan resulted in little immediate antibacterial and anti-adherent effects but failed to show any long-lasting effect, while rinsing with tannic acid resulted in strong immediate and long-lasting effects. Except for a slightly lower antibacterial effect, the neutral solution of tannic acid was as good as the acidic solution. Hydrochloric acid showed neither an antibacterial nor an anti-adherent effect on dental biofilm formation. Experimental solutions containing tannic acid are promising anti-biofilm agents, irrespective of the pH values of the solutions. Chitosan, on the other hand, was not able to prevent biofilm formation.

Effect of fragaria vesca, hamamelis and tormentil on the initial bacterial colonization in situ

OBJECTIVE

The presentin situ study aims to examine the influence of the polyphenolic tea drugs fragaria vesca, hamamelis and tormentil on the initial oral bioadhesion.

DESIGN

Initial biofilm formation was performed on bovine enamel slabs which were carried intraorally by 12 subjects. After 1 min of intraoral pellicle formation, the subjects rinsed with fragaria vesca, tormentil (0.8 mg/8 mL) and hamamelis (0.2 mg/8 mL) for 10 min. Tap water served as negative control, 0.2 % CHX as positive control. The investigations took place on different days (wash-out: 2 days). Afterwards, fluorescence microscopy has been performed per test solution (n = 5) and per subject (n = 12) to visualize bacterial adhesion and glucan formation (8 h oral exposition) with DAPI, ConA and BacLight. Additionally, TEM was used to visualize the pellicle ultrastructure and expectorate samples. Statistical evaluation was carried out using the Kruskal-Wallis- (p < 0.5), Mann-Whitney U test (p < 0.5) and Bonferroni-Holm-correction (p < 0.1).

RESULTS

Rinsing with the polyphenolic tea extracts reduced significantly initial bacterial colonization (DAPI) compared to the negative control. There was no significant difference betweenfragaria vesca, hamamelis and tormentil. All solutions showed a reducing effect on the glucan formation. No significant difference was observed between fragaria vesca and CHX. Considerable alterations of the pellicle's ultrastructure manifested by an increase in thickness and electron density resulted from rinsing with the three polyphenolic aqueous extracts.

CONCLUSIONS

Fragaria vesca, hamamelis and tormentil significantly reduce initial bioadhesion and glucan formation in situ and are therefore recommended as adjuvant antibacterial oral therapeutics.

Synergism between Corynebacterium and Streptococcus sanguinis reveals new interactions between oral commensals

The oral microbiome engages in a diverse array of highly sophisticated ecological interactions that are crucial for maintaining symbiosis with the host. Streptococci and corynebacteria are among the most abundant oral commensals and their interactions are critical for normal biofilm development. In this study, we discovered that Streptococcus sanguinis specifically responds to the presence of Corynebacterium durum by dramatically altering its chain morphology and improving its overall fitness. By employing gas chromatography-mass spectrometry (GC-MS) analysis, specific fatty acids were identified in C. durum supernatants that are responsible for the observed effect. Membrane vesicles (MVs) containing these fatty acids were isolated from C. durum supernatants and were able to replicate the chain morphology phenotype in S. sanguinis, suggesting MV as a mediator of interspecies interactions. Furthermore, S. sanguinis responds to C. durum lipids by decreasing the expression of key FASII genes involved in fatty acid synthesis. Several of these genes are also essential for the chain elongation phenotype, which implicates a regulatory connection between lipid metabolism and chain elongation. In addition, C. durum was found to affect the growth, cell aggregation, and phagocytosis of S. sanguinis, revealing a complex association of these species that likely supports oral commensal colonization and survival.

Effects of subgingival air-polishing with trehalose powder on oral biofilm during periodontal maintenance therapy: a randomized-controlled pilot study

Background

This pilot study was part of a larger study which compared the effect of subgingival air-polishing using trehalose powder with sonic scaling on clinical parameters during supportive periodontal therapy. Within this microbiological part of the investigation subgingival samples were taken from 10 participants to analyze the survival of different bacterial species after the two different treatments as a proof of principle.

Methods

In 10 participants two non-adjacent, single-root teeth requiring treatment (PD =5 mm with bleeding on probing (BOP) or > 5 mm) were selected following a split-mouth design and were treated either with a sonic scaler or air-polishing device and trehalose powder. For persistent pockets (PD =4 mm and BOP or > 4 mm), treatment was repeated after 3 months. Subgingival biofilm samples were taken at baseline (BL), subsequently and three and six months after treatment. After determination of the bacterial counts (TBL), isolated bacteria were identified by MALDI-TOF-MS. If unsuccessful, PCR and 16S rDNA sequencing were performed.

Results

In both treatment groups, TBL decreased immediately after treatment remaining at a lower level. This confirms the findings of the larger study regarding clinical parameters showing a comparable effect on PD, BOP and CAL. Immediately after treatment, the diversity of detected species decreased significantly more than in the sonic group (p = 0.03). After 3 months, the proportion of Gram-positive anaerobic rods was lower in the air-polishing group (powder/ sonic 7%/ 25.9%, p = 0.025). Also, there was a greater reduction of Gram-negative aerobic rods for this group at this time (air-polishing/ sonic − 0.91 / -0.23 Log10 cfu/ ml, p = 0.020).

Conclusion

Within the limitations of this study air-polishing and sonic treatment seem to have a comparable effect on the subgingival oral biofilm during supportive periodontal treatment.

Trial registration

The study was registered in an international trial register (German Clinical Trial Register number DRKS 00006296) on 10th of June 2015. HTML&TRIAL_ID = DRKS00006296.

Incorporation of zwitterionic materials into light-curable fluoride varnish for biofilm inhibition and caries prevention

We incorporated zwitterionic materials into light-curable fluoride varnish (LCFV) in order to inhibit biofilm accumulation and prevent dental caries, and the properties of LCFV with three different zwitterionic materials, namely, 2-methacryloyloxyethyl phosphorylcholine (MPC), carboxybetaine methacrylate (CBMA), and sulfobetaine methacrylate (SBMA) polymers (each at a weight percentage of 3%), were compared; unmodified LCFV without any zwitterionic material was used as a control. Material properties including film thickness and degree of conversion (DC) of each type of LCFV were evaluated. In addition, protein-repellent effects and inhibitory effects on Streptococcus mutans adhesion and saliva-derived biofilm accumulation of LCFV were estimated. Finally, the preventive effect of LCFV on enamel demineralization was assessed in vitro on extracted human teeth specimens stored in S. mutans-containing medium. The film thickness of LCFV significantly decreased with the incorporation of zwitterionic materials compared to the control LCFV, whereas there were no significant differences in the DC among all of the LCFV groups. Furthermore, the amount of adsorbed protein, adherent S. mutans colony-forming unit (CFU) counts, and saliva-derived biofilm thickness and biomass were all significantly lower for LCFV with incorporated zwitterionic materials compared with the control. All LCFV groups including the control showed certain preventive effects against enamel demineralization during a 14-day immersion in the medium with S. mutans and sucrose, and the depth of demineralization was significantly lower in LCFV with zwitterionic materials than in the control. Thus, the incorporation of zwitterionic materials such as MPC, CBMA, and SBMA appears to confer superior antifouling effects to LCFV.

Influence of pure fluorides and stannous ions on the initial bacterial colonization in situ

The present clinical-experimental study aims to examine the effect of pure experimental fluoride solutions and stannous chloride on the initial oral bioadhesion under in situ conditions. After 1 min of pellicle formation on bovine enamel slabs, 12 subjects rinsed with 8 ml of the fluoride test solutions (NaF, Na2PO3F, AmF, SnF2,) with 500 ppm fluoride concentration each for 1 min. Additionally, rinsing without a solution (control) and rinsing with 1563 ppm SnCl2 solution took place for 1 min. Afterwards, fluorescence microscopy took place to visualize bacterial adhesion and glucan formation (8 h oral exposition) with DAPI and ConA and the BacLight method. TEM was performed to visualize the pellicle ultrastructure together with EDX to detect stannous ions. The rinsing solutions with pure SnF2 and SnCl2 reduced significantly the initial bacterial colonization (DAPI). While, NaF and Na2PO3F showed no significant effect compared to the control. There was no significant difference between AmF, SnF2 and SnCl2. All tested experimental solutions showed no reducing effect on the glucan formation. Considerable alterations of the pellicle ultrastructure resulted from rinsing with the Sn-containing solutions. SnF2 appears to be the most effective type of fluoride to reduce initial bacterial colonization in situ. The observed effects primarily have to be attributed to the stannous ions' content.

Pulsed 450 nm blue light suppresses MRSA and Propionibacterium acnes in planktonic cultures and bacterial biofilms

In our recent study, we showed that pulsed blue light (PBL) suppresses the growth of Propionibacterium acnes more than continuous wave (CW) blue light in vitro, but it is not known that other bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA), respond similarly to PBL. The high potency of PBL relative to CW blue light makes it a suitable antimicrobial for suppressing bacterial growth in biofilms as well. Therefore, we determined if MRSA-a deadly bacterium of global concern-is susceptible to 450 nm PBL irradiation in vitro, and ascertained whether the bactericidal effect of PBL on planktonic P. acnes culture can be replicated in biofilms of P. acnes and MRSA. In three series of experiments, we irradiated P. acnes and MRSA respectively, either in planktonic cultures, forming biofilms or formed biofilms. Compared to controls, the results showed 100% bacterial suppression in planktonic cultures of MRSA irradiated with 3 mW/cm² irradiance and 7.6 J/cm² radiant exposure three times at 30-minute intervals, and also in P. acnes cultures irradiated with 2 mW/cm² irradiance 5 J/cm² radiant exposure thrice daily during each of 3 days. Irradiation of biofilms with the same irradiances and radiant exposures that gave 100% bacterial suppression in planktonic cultures resulted in disruption and disassembly of the architecture of MRSA and P. acnes biofilms, more so in forming biofilms than formed biofilms. The antimicrobial effect on each bacterium was minimal in forming biofilms, and even less in formed biofilms. Increasing radiant exposure slightly from 7.6 J/cm² to 10.8 J/cm² without changing any other parameter, yielded more disruption of the biofilm and fewer live MRSA and P. acnes, suggesting that 100% bacterial suppression is possible with further refinement of the protocol. In both planktonic cultures and biofilms, PBL suppressed MRSA more than P. acnes.

CdSe QD Biosynthesis in Yeast Using Tryptone-Enriched Media and Their Conjugation with a Peptide Hecate for Bacterial Detection and Killing

The physical and chemical synthesis methods of quantum dots (QDs) are generally unfavorable for biological applications. To overcome this limitation, the development of a novel "green" route to produce highly-fluorescent CdSe QDs constitutes a promising substitute approach. In the present work, CdSe QDs were biosynthesized in yeast Saccharomyces cerevisiae using a novel method, where we showed for the first time that the concentration of tryptone highly affects the synthesis process. The optimum concentration of tryptone was found to be 25 g/L for the highest yield. Different methods were used to optimize the QD extraction from yeast, and the best method was found to be by denaturation at 80 °C along with an ultrasound needle. Multiple physical characterizations including transmission electron microscopy (TEM), dynamic light scattering (DLS), energy-dispersive X-ray spectroscopy (EDX), and spectrophotometry confirmed the optical features size and shape distribution of the QDs. We showed that the novel conjugate of the CdSe QDs and a cell-penetrating peptide (hecate) can detect bacterial cells very efficiently under a fluorescent microscope. The conjugate also showed strong antibacterial activity against vancomycin-resistant Staphylococcus aureus (VRSA), methicillin-resistant Staphylococcus aureus (MRSA), and Escherichia coli, which may help us to cope with the problem of rising antibiotic resistance.

Activity and distribution pattern of enzymes in the in-situ pellicle of children

OBJECTIVE

This study investigated, for the first time, pellicle enzymes with respect to their activity, distribution and fluorescence pattern in children with different caries experience.

DESIGN

In-situ pellicles were collected from 41 children (aged 4-6 years) with different caries status; 17 of them were caries-free (dmf = 0), 12 had dental restorations but no current caries (dmf ≥ 2) and 12 had at least two carious lesions (dmf ≥ 2). Bovine enamel samples were fixed on individual upper jaw braces for pellicle formation. After 30 min of intraoral exposure, the pellicle and saliva samples were analysed for the activities of amylase, lysozyme, peroxidase and glucosyltransferase (GTF). The distribution of these enzymes, including GTF-isoforms B, C and D, and the pellicle ultrastructure were examined by gold-immunolabelling and transmission electron microscopy (TEM). Furthermore, interactions between pellicle enzymes and adherent bacteria were visualised using combined fluorescence and immunofluorescence labelling.

RESULTS

There were no significant differences in the pellicle enzyme activities between the study groups. TEM analysis revealed the absence of GTF C and D in the pellicle of caries-active children. Amylase, peroxidase and GTF-isoforms showed a random distribution within the pellicle layer; lysozyme was found in the form of clusters. A similar ultrastructural pattern was observed for all subjects. Fluorescence labelling technique enabled visualisation of all enzymes, except for GTF B.

CONCLUSION

Pellicle enzyme activities and ultrastructure are not associated with children's caries status. Further investigation is needed to assess the influence of individual GTF-isoforms on caries susceptibility in children.

Is it really penetration? Part 2. Locomotion of Enterococcus faecalis cells within dentinal tubules of bovine teeth

OBJECTIVE

The aim of the present vitro study was to examine the question whether devitalized Enterococcus faecalis (E. faecalis) cells can migrate into dentinal tubules and if that process takes place in a time-dependent manner.

DESIGN

Sixty bovine root canals were incubated with devitalized and vital streptomycin-resistant E. faecalis strains after root canal enlargement (size 80, taper .02) with 3% NaOCl solution. Incubation times 7, 14, 21, 28, 35, and 42 days. Samples were processed for analysis by scanning electron microscopy (SEM) and DAPI (4',6-diamidino-2-phenylindole) staining. The penetration depth was calculated with the measurement tool of the Axio Vision program (Zeiss, Jena, Germany). Statistical analysis was performed by Kruskal-Wallis (α = 0.05) and Mann-Whitney U test (p < 0.05).

RESULTS

Devitalized E. faecalis strains were able to migrate into dentinal tubules. The total number and penetration depth of devitalized E. faecalis cells was lower compared to the vital suspension of E. faecalis. It was noted, that bacterial penetration was not common to all of the dentinal tubules in the vital E. faecalis control and especially in the devitalized control. The migration took place in a time-dependent migration characteristic.

CONCLUSIONS

Devitalized E. faecalis cells are still able to migrate into the dentinal tubules due to possible electrokinetic and osmotic processes. Thereby, increased exposure times lead to a time-dependent penetration characteristic.

CLINICAL RELEVANCE

Since devitalized bacteria can migrate as well into dentinal tubules, the presence of bacteria within dentinal tubules cannot be interpreted as a failure of tested preparation regimens.

A suite of complementary biocontrol traits allows a native consortium of root-associated bacteria to protect their host plant from a fungal sudden-wilt disease

The beneficial effects of plant--bacterial interactions in controlling plant pests have been extensively studied with single bacterial isolates. However, in nature, bacteria interact with plants in multitaxa consortia, systems which remain poorly understood. Previously, we demonstrated that a consortium of five native bacterial isolates protected their host plant Nicotiana attenuata from a sudden wilt disease. Here we explore the mechanisms behind the protection effect against the native pathosystem. Three members of the consortium, Pseudomonas azotoformans A70, P. frederiksbergensis A176 and Arthrobacter nitroguajacolicus E46, form biofilms when grown individually in vitro, and the amount of biofilm increased synergistically in the five-membered consortium, including two Bacillus species, B. megaterium and B. mojavensis. Fluorescence in situ hybridization and scanning electron microscopy in planta imaging techniques confirmed biofilm formation and revealed locally distinct distributions of the five bacterial strains colonizing different areas on the plant-root surface. One of the five isolates, K1 B. mojavensis produces the antifungal compound surfactin, under in vitro and in vivo conditions, clearly inhibiting fungal growth. Furthermore, isolates A70 and A176 produce siderophores under in vitro conditions. Based on these results we infer that the consortium of five bacterial isolates protects its host against fungal phytopathogens via complementary traits. The study should encourage researchers to create synthetic communities from native strains of different genera to improve bioprotection against wilting diseases.

Relevance of Topographic Parameters on the Adhesion and Proliferation of Human Gingival Fibroblasts and Oral Bacterial Strains

Dental implantology allows replacement of failing teeth providing the patient with a general improvement of health. Unfortunately not all reconstructions succeed, as a consequence of the development of infections of bacterial origin on the implant surface. Surface topography is known to modulate a differential response to bacterial and mammalian cells but topographical measurements are often limited to vertical parameters. In this work we have extended the topographical measurements also to lateral and hybrid parameters of the five most representative implant and prosthetic component surfaces and correlated the results with bacterial and mammalian cell adhesion and proliferation outcomes. Primary human oral gingival fibroblast (gum cells) and the bacterial strains: Streptococcus mutans, Streptococcus sanguinis and Aggregatibacter actinomycetemcomitans, implicated in infectious processes in the oral/implant environment were employed in the presence or absence of human saliva. The results confirm that even though not all the measured surface is available for bacteria to adhere, the overall race for the surface between cells and bacteria is more favourable to the smoother surfaces (nitrided, as machined or lightly acid etched) than to the rougher ones (strong acid etched or sandblasted/acid etched).

Bacterial viability in oral biofilm after tooth brushing with amine fluoride or sodium fluoride

OBJECTIVE

The aim of this study was to investigate the effects of sodium fluoride (NaF) and amine fluoride (AmF) on bacterial viability in the oral cavity.

MATERIAL AND METHODS

Healthy subjects brushed their teeth with either fluoride free toothpaste, NaF- or AmF-containing toothpaste. Biofilm smears from different locations were collected before and immediately and 30 and 120 min after tooth brushing. The smears were stained with live/dead bacterial staining, and the number of the respective bacteria was counted. The data were statistically analyzed by comparing the numbers of bacteria before and after the application of no fluoride, NaF and AmF.

RESULTS

The highest numbers of bacteria were found in the tongue biofilm, followed by the palatal and cheek biofilm. The lowest numbers were found in the mouth floor biofilm. After the application of AmF, no changes in the numbers of bacteria were found in the biofilms, except for the cheek, where they were reduced. After the application of NaF, the number of bacteria decreased significantly in all biofilms. After 120 min, bacterial regrowth was complete.

CONCLUSIONS

AmF has only little effect on the bacterial viability of oral biofilms. NaF application reduces the number of living bacteria in the oral biofilms. This effect lasts not longer than 120 min.

Comparison of initial oral microbiomes of young adults with and without cavitated dentin caries lesions using an in situ biofilm model

Dental caries is caused by acids released from bacterial biofilms. However, the in vivo formation of initial biofilms in relation to caries remains largely unexplored. The aim of this study was to compare the oral microbiome during the initial phase of bacterial colonization for individuals with (CC) and without (NC) cavitated dentin caries lesions. Bovine enamel slabs on acrylic splints were worn by the volunteers (CC: 14, NC: 13) for in situ biofilm formation (2 h, 4 h, 8 h, 1 ml saliva as reference). Sequencing of the V1/V2 regions of the 16S rRNA gene was performed (MiSeq). The relative abundances of individual operational taxonomic units (OTUs) were compared between samples from the CC group and the NC group. Random forests models were furthermore trained to separate the groups. While the overall heterogeneity did not differ substantially between CC and NC individuals, several individual OTUs were found to have significantly different relative abundances. For the 8 h samples, most of the significant OTUs showed higher relative abundances in the CC group, while the majority of significant OTUs in the saliva samples were more abundant in the NC group. Furthermore, using OTU signatures enabled a separation between both groups, with area-under-the-curve (AUC) values of ~0.8. In summary, the results suggest that initial oral biofilms provide the potential to differentiate between CC and NC individuals.

Impact of the springtail's cuticle nanotopography on bioadhesion and biofilm formation in vitro and in the oral cavity

Springtails (Collembola) have a nanostructured cuticle. To evaluate and to understand anti-biofouling properties of springtail cuticles' morphology under different conditions, springtails, shed cuticles and cuticle replicates were studied after incubation with protein solutions and bacterial cultures using common in vitro models. In a second step, they were exposed to human oral environment in situ in order to explore potential application in dentistry. In vitro, the cuticular structures were found to resist wetting by albumin solutions for up to 3 h and colonization by Staphylococcus epidermidis was inhibited. When exposed in the oral cavity, initial pellicle formation was of high heterogeneity: parts of the surface were coated by adsorbed proteins, others remained uncoated but exhibited locally attached, 'bridging', proteinaceous membranes spanning across cavities of the cuticle surface; this unique phenomenon was observed for the first time. Also the degree of bacterial colonization varied considerably. In conclusion, the springtail cuticle partially modulates bioadhesion in the oral cavity in a unique and specific manner, but it has no universal effect. Especially after longer exposure, the nanotextured surface of springtails is masked by the pellicle, resulting in subsequent bacterial colonization, and, thus, cannot effectively avoid bioadhesion in the oral cavity comprehensively. Nevertheless, the observed phenomena offer valuable information and new perspectives for the development of antifouling surfaces applicable in the oral cavity.