Anatomy and fine structure of pedicellar glands in phoretic deutonymphs of uropodid mites (Acari: Mesostigmata)

Inclusion of juvenile stages improves diversity assessment and adds to our understanding of mite ecology - A case study from mires in Norway

Arachnid orders, Mesostigmata, Trombidiformes, and Sarcoptiformes, commonly known as 'mites', are abundant in mires, both as adults and as juveniles. However, due to the challenges of identification, the juvenile forms are often excluded from analyses. This is the first study in mires that included all three mite orders identified to the species level, including juvenile instars. We aimed to compare how diversity and the response to ecological variables differed if only the adults (ad) vs. the total number of specimens (ad+juv) are considered. Samples of 20 Sphagnum species (five subgenera) were collected and mites were extracted using Berlese funnels. Overall, nearly 60,000 mites were analyzed; of these Mesostigmata made up 1.87% of the total, Trombidiformes -0.27%, and Sarcoptiformes -97.86%. The study revealed 154 species (33 Mesostigmata, 24 Trombidiformes, and 97 Sarcoptiformes), the highest diversity of mites ever reported from mires. The inclusion of juveniles increased observed species richness by 6%, with 10 species (one Mesostigmata, six Trombidiformes, and three Sarcoptiformes) represented only by juvenile forms. Seventeen species are new to Norway (four Mesostigmata, one Sarcoptiformes, and 12 Trombidiformes, including five undescribed species of Stigmaeidae and Cunaxidae). Four of these were represented in the samples only by juveniles. Including the juveniles explained a greater amount of the variability of Trombidiformes (explanatory variables account for 23.60% for ad, and 73.74% for ad+juv) and Mesostigmata (29.23% - ad, 52.91% - ad+juv), but had less of an impact for Sarcoptiformes (38.48% - ad, 39.26% - ad+juv). Locality, Sphagnum subgenus and species, wetness, and trophic state significantly affected the mite communities and should be taken into consideration when studying mires. Since juvenile stages contribute significantly to mite diversity in mires, they should also be included in mite studies in other habitats.

Effect of food source availability in the salivary gland transcriptome of the unique burying beetle Nicrophorus pustulatus (Coleoptera: Silphidae)

Nicrophorus is a genus of beetles that bury and transform small vertebrate carcasses into a brood ball coated with their oral and anal secretions to prevent decay and that will serve as a food source for their young. Nicrophorus pustulatus is an unusual species with the ability to overtake brood of other burying beetles and whose secretions, unlike other Nicrophorus species, has been reported not to exhibit antimicrobial properties. This work aims to better understand how the presence or absence of a food source influences the expression of genes involved in the feeding process of N. pustulatus. To achieve that, total RNA was extracted from pooled samples of salivary gland tissue from N. pustulatus and sequenced using an Illumina platform. The resulting reads were used to assemble a de novo transcriptome using Trinity. Duplicates with more than 95% similarity were removed to obtain a "unigene" set. Annotation of the unigene set was done using the Trinotate pipeline. Transcript abundance was determined using Kallisto and differential gene expression analysis was performed using edgeR. A total of 651 genes were found to be differentially expressed, including 390 upregulated and 261 downregulated genes in fed insects compared to starved. Several genes upregulated in fed beetles are associated with the insect immune response and detoxification processes with only one transcript encoding for the antimicrobial peptide (AMP) defensin. These results confirm that N. pustulatus does not upregulate the production of genes encoding AMPs during feeding. This study provides a snapshot of the changes in gene expression in the salivary glands of N. pustulatus following feeding while providing a well described transcriptome for the further analysis of this unique burying beetle.

Morphology of genitalia and non-genitalic contact structures inTrouessartiafeather mites (Astigmata: Analgoidea: Trouessartiidae): is there evidence of correlated evolution between the sexes?

Positive correlations between the shapes of male and female sexual structures can be interpreted as cooperative or as combative. In the feather mite genus Trouessartia Canestrini, 1899, the spermaducts of females range from entirely internal to extending externally for varying lengths, whereas male primary genitalia range from gracile to massive. Males also possess a pair of adanal suckers used to hold onto the dorsal surface of the female during copulation. In the area of this attachment, females exhibit ornamentation and have strongly developed dorsal setae (setae h1), which we hypothesized serve to weaken the male’s hold during copulation. In male and female Trouessartia from 51 bird species, we compared female external spermaduct length and male genitalic “massiveness” and explored whether patterns of female dorsal ornamentation and (or) h1 seta size correlate with male adanal sucker size. Our results indicate that females with longer external spermaducts are associated with males with relatively massive genitalia. However, we found no significant relationship between male adanal sucker size and female ornamentation or h1 seta size. Further information regarding how the genitalia interact during sperm transfer is necessary to interpret correlations in genitalia size and strong intersexual differences in dorsal ornamentation and seta size in Trouessartia.

Patterns of Distribution of Phoretic Deutonymphs of Uropodina on Longhorn Beetles in Białowieża Primeval Forest, Central Europe

We studied the distributional patterns of phoretic deutonymphs of the genera Oodinychus and Trichouropoda (Uropodina) on the longhorn beetles Monochamus sartor urussovii, Plagionotus detritus, Tetropium castaneum, and Te. fuscum, based on large samples of specimens (992 beetles and 25,587 mites) collected in the Białowieża Primeval Forest in Central Europe in the years 2008 and 2012–2016. All the studied phoretic phoront-host associations are characterized by different patterns of the attachment sites of mites on beetle’s body. In the case of O. ovalis and M. sartor urussovii association, the deutonymphs were found mostly on the pronotum and dorsal surface of the elytra. This is the only instance in which phoronts were absent on the legs. Deutonymphs of T. sociata on P. detritus preferred the abdomnen (both tergites and ventrites) and the hindlegs. Only in this case the phoronts were attached inside the subelytral space. The highest number of deutonymphs of T. shcherbakae on both Tetropium species occured on the legs. In the case of Te. castaneum, similar proportions of mites were recorded on all pairs of legs, while the preferred location of mites phoretic on Te. fuscum were the forelegs. Both the preferences of phoretic deutonymphs for specific parts of the host’s body and the participation of carriers transporting deutonymphs on particular parts of their bodies were very consistent.

To attach or not to attach? The effect of carrier surface morphology and topography on attachment of phoretic deutonymphs of Uropoda orbicularis (Acari)

Previous studies on preferences of phoretic deutonymphs of Uropodina for attachment sites have shown that they frequently select smooth and hydrophobic surfaces. The aim of our study was to provide the detailed morphological and topographical characteristics of beetle body surfaces to which deutonymphs frequently attach and to verify how the presence of setae and surface sculpture affects deutonymph attachment. The study was conducted on Uropoda orbicularis (Müller, 1776) and its common beetle carriers: Aphodius prodromus (Brahm, 1790), Aphodius fimetarius (Linnaeus, 1758), Onthophagus nuchicornis (Linnaeus, 1758) and Margarinotus carbonarius (Hoffmann, 1803). Morphology and topography of elytra, femora, propygidia and pygidia of beetles were analysed mainly using SEM methods supported with CLSM and AFM techniques. The hypothesis that deutonymphs may attach to surfaces covered with setae, if seta density is low enough not to disturb mite movement, was tested. The study revealed that deutonymphs attach to surfaces of various types as follows: (i) smooth, (ii) hairy, i.e., covered with setae, (iii) flat and (iv) sculptured. Smooth body parts and body parts covered with setae of low density were most frequently and intensively occupied with deutonymphs. Surfaces of high seta density were avoided by mites. Within elytra of Aphodius beetles, deutonymphs definitely preferred flat surfaces of elytral intervals. On the contrary, densely punctuated propygidium and pygidium in M. carbonarius were heavily infested with deutonymphs. We conclude that carrier surface morphology and topography are important for Uropodina deutonymph attachment, but these two factors cannot fully explain the observed relation.

Localization and density of phoretic deutonymphs of the mite Uropoda orbicularis (Parasitiformes: Mesostigmata) on Aphodius beetles (Aphodiidae) affect pedicel length

The phoretic stage of Uropodina mites is a deutonymph with developed morphological adaptations for dispersal by insects. Phoretic deutonymphs are able to produce a pedicel, a stalk-like temporary attachment structure that connects the mite with the carrier. The aim of our study was to determine whether localization and density of phoretic deutonymphs on the carrier affect pedicel length. The study was conducted on a common phoretic mite—Uropoda orbicularis (Uropodina) and two aphodiid beetles—Aphodius prodromus and Aphodius distinctus. Our results show that pedicel length is influenced by the localization of deutonymphs on the body of the carrier. The longest pedicels are produced by deutonymphs attached to the upper part of elytra, whereas deutonymphs attached to femora and trochanters of the third pair of legs and the apex of elytra construct the shortest pedicels. In general, deutonymphs attached to more exposed parts of the carrier produce longer pedicels, whereas shorter pedicels are produced when deutonymphs are fixed to non-exposed parts of the carrier. A second factor influencing pedicel length is the density of attached deutonymphs. Mean pedicel length and deutonymph densities were highly correlated: higher deutonymph density leads to the formation of longer pedicels. The cause for this correlation is discussed, and we conclude that pedicel length variability can increase successful dispersal.

Morphological diversity of pedicels in phoretic deutonymphs of Uropodina mites (Acari: Mesostigmata)

The pedicel is a structure that connects the phoretic deutonymph of Uropodina mites with its carrier and enables dispersal. The shapes, lengths and diameters of pedicels formed by Uropoda orbicularis, Trichouropoda ovalis, Uroobovella pulchella and Uroobovella nova were studied by scanning and light microscopy. Pedicels of U. orbicularis and T. ovalis have the shape of a straight stalk. In U. pulchella, the pedicel is extremely short, irregularly shaped and composed of homogeneous material. The longest pedicel is found in U. nova and it may be helically coiled in this species. The length of the pedicel is positively correlated with deutonymph body size between species, but not within species. Pedicels of U. orbicularis and U. pulchella have the largest diameter. The pedicel diameter in U. orbicularis and T. ovalis is inversely proportional to its length, but not in U. nova and U. pulchella. The constituent of pedicel stems in U. pulchella is homogeneous, whereas in U. orbicularis and T. ovalis it contains a bundle of tightly packed fibres. In U. nova coiled pedicels are comprised of two layered materials of different electron density, one of which is electron lucid and located peripherally. Hypotheses on the origin of the pedicel are proposed.