The early and midterm function of decellularized aortic valve allografts

Decellularized aortic homografts versus mechanical composite grafts for aortic root replacement

OBJECTIVES

Mechanical composite valve grafts (MCVGs) are the first-line therapy for aortic root replacement in young adults. Decellularized aortic homografts (DAH) present a promising novel alternative due to their lower thrombogenicity. We aimed to compare both treatment options regarding survival and valve-related adverse events.

METHODS

This study was designed as a single-centre retrospective cohort study including patients who underwent root replacement with MCVG or DAH between 2000 and 2022. Urgent or emergent procedures were excluded.

RESULTS

The study cohort included 289 patients (MCVG n = 216, DAH n = 73) with a mean age of 48.5 ± 12 years (MCVG 49 ± 12 years vs DAH 47 ± 11 years; P = 0.23) and a median EuroScore II of 1.7% (1.2, 2.6). The 30-day mortality was 1% (n = 3). Cumulative survival at 3 years was 99% for DAH and 94% for MCVG, respectively (P = 0.15). Mean follow-up was 98.9 ± 72.7 months. Bleeding events (n = 14, 6.5%) and thromboembolism (n = 14, 6.5%) were only observed in the MCVG group (P = 0.19 and 0.09, respectively). Four cases (5%) of moderate structural valve deterioration occurred, all in the DAH group (P ≤ 0.001). The cumulative incidence of a composite end point of valve-related adverse events was significantly higher in the MCVG group (P = 0.0295).

CONCLUSIONS

Aortic root replacement with MCVGs and decellularized aortic homografts showed low mortality in an elective setting. Patients in the homograft cohort demonstrated significantly higher freedom from valve-related adverse events. DAH present a promising treatment option for young patients requiring root replacement; however, data on long-term durability are needed.

Development and testing of a transcatheter heart valve with reduced calcification potential

Introduction

Patients from developing countries who require heart valve surgery are younger and have less access to open heart surgery than those from developed countries. Transcatheter heart valves (THVs) may be an alternative but are currently unsuitable for young patients because of their inadequate durability. We developed and tested a THV utilizing two new types of decellularized bovine pericardial leaflets in an ovine model.

Methods

The two decellularized tissues [one with a very low dose (0.05%) of monomeric glutaraldehyde (GA) fixation and detoxification (DF) and the other without glutaraldehyde (DE)] were compared to an industry standard [Glycar-fixed with the standard dose (0.625%) of glutaraldehyde]. THVs were manufactured with the three tissue types and implanted in the pulmonary position of nine juvenile sheep for 180 days. Baseline and post-explantation evaluations were performed to determine the hemodynamic performance of the valves and their dynamic strength, structure, biological interaction, and calcification.

Results

Heart failure occurred in one animal due to incompetence of its Glycar valve, and the animal was euthanized at 158 days. The gradients over the Glycar valves were higher at the explant than at the implant, but the DE and DF valves maintained normal hemodynamic performance throughout the study. The DF and DE tissues performed well during the mechanical testing of explanted leaflets. Glycar tissue developed thick pannus and calcification. Compared to Glycar, the DF tissue exhibited reduced pannus overgrowth and calcification and the DE tissue exhibited no pannus formation and calcification. All tissues were endothelialized adequately. There was a striking absence of host ingrowth in the DE tissue leaflets, yet these leaflets maintained integrity and mechanical function.

Conclusion

In the juvenile sheep THV model, Glycar tissue developed significant pannus, calcification, and hemodynamic deterioration. Using a very low dose of monomeric GA to fix the decellularized bovine pericardium yielded less pannus formation, less calcification, and better hemodynamic function. We postulate that the limited pannus formation in the DF group results from GA. Bovine pericardium decellularized with our proprietary method resulted in inert tissue, which is a unique finding. These results justify further development and evaluation of the two decellularized tissue types in THVs for use in younger patients.

Aortic Valve Replacement in Adult Patients with Decellularized Homografts: A Single-Center Experience

BACKGROUND

decellularized aortic homografts (DAH) represent a promising alternative for aortic valve replacement in young adults due to their low immunogenicity and thrombogenicity. Herein, we report our midterm, single-center experience in adult patients with non-frozen DAH from corlife.

METHODS

safety, durability, and hemodynamic performance were evaluated according to current guidelines in all consecutive patients who had received a DAH at our center since 03/2016.

RESULTS

seventy-three (mean age 47 ± 11 years, 68.4% (n = 50) male) patients were enrolled. The mean diameter of the implanted DAH was 24 ± 2 mm. Mean follow-up was 36 ± 27 months, with a maximum follow-up of 85 months and cumulative follow-up of 215 years. No cases of stenosis were observed, in four (5.5%) cases moderate aortic regurgitation occurred, but no reintervention was required. No cases of early mortality, non-structural dysfunction, reoperation, valve endocarditis, or thrombosis were observed. Freedom from bleeding and thromboembolic events was 100%; freedom from re-intervention was 100%; survival was 98.6% (n = 72).

CONCLUSIONS

early and mid-term results showed low mortality and 100% freedom from reoperation, thromboembolic events, and bleeding at our center. However, in order for this novel approach to be established as a valid alternative to aortic valve replacement in young patients, long-term data are required.

Macrophage-extracellular matrix interactions: Perspectives for tissue engineered heart valve remodeling

In situ heart valve tissue engineering approaches have been proposed as promising strategies to overcome the limitations of current heart valve replacements. Tissue engineered heart valves (TEHVs) generated from in vitro grown tissue engineered matrices (TEMs) aim at mimicking the microenvironmental cues from the extracellular matrix (ECM) to favor integration and remodeling of the implant. A key role of the ECM is to provide mechanical support to and attract host cells into the construct. Additionally, each ECM component plays a critical role in regulating cell adhesion, growth, migration, and differentiation potential. Importantly, the immune response to the implanted TEHV is also modulated biophysically via macrophage-ECM protein interactions. Therefore, the aim of this review is to summarize what is currently known about the interactions and signaling networks occurring between ECM proteins and macrophages, and how these interactions may impact the long-term in situ remodeling outcomes of TEMs. First, we provide an overview of in situ tissue engineering approaches and their clinical relevance, followed by a discussion on the fundamentals of the remodeling cascades. We then focus on the role of circulation-derived and resident tissue macrophages, with particular emphasis on the ramifications that ECM proteins and peptides may have in regulating the host immune response. Finally, the relevance of these findings for heart valve tissue engineering applications is discussed.

Biofabrication of Sodium Alginate Hydrogel Scaffolds for Heart Valve Tissue Engineering

Every year, thousands of aortic valve replacements must take place due to valve diseases. Tissue-engineered heart valves represent promising valve substitutes with remodeling, regeneration, and growth capabilities. However, the accurate reproduction of the complex three-dimensional (3D) anatomy of the aortic valve remains a challenge for current biofabrication methods. We present a novel technique for rapid fabrication of native-like tricuspid aortic valve scaffolds made of an alginate-based hydrogel. Using this technique, a sodium alginate hydrogel formulation is injected into a mold produced using a custom-made sugar glass 3D printer. The mold is then dissolved using a custom-made dissolving module, revealing the aortic valve scaffold. To assess the reproducibility of the technique, three scaffolds were thoroughly compared. CT (computed tomography) scans showed that the scaffolds respect the complex native geometry with minimal variations. The scaffolds were then tested in a cardiac bioreactor specially designed to reproduce physiological flow and pressure (aortic and ventricular) conditions. The flow and pressure profiles were similar to the physiological ones for the three valve scaffolds, with small variabilities. These early results establish the functional repeatability of this new biofabrication method and suggest its application for rapid fabrication of ready-to-use cell-seeded sodium alginate scaffolds for heart valve tissue engineering.

Impact of Three Different Processing Techniques on the Strength and Structure of Juvenile Ovine Pulmonary Homografts

Homografts are routinely stored by cryopreservation; however, donor cells and remnants contribute to immunogenicity. Although decellularization strategies can address immunogenicity, additional fixation might be required to maintain strength. This study investigated the effect of cryopreservation, decellularization, and decellularization with additional glutaraldhyde fixation on the strength and structure of ovine pulmonary homografts harvested 48 h post-mortem. Cells and cellular remnants were present for the cryopreserved group, while the decellularized groups were acellular. The decellularized group had large interfibrillar spaces in the extracellular matrix with uniform collagen distribution, while the additional fixation led to the collagen network becoming dense and compacted. The collagen of the cryopreserved group was collapsed and appeared disrupted and fractured. There were no significant differences in strength and elasticity between the groups. Compared to cryopreservation, decellularization without fixation can be considered an alternative processing technique to maintain a well-organized collagen matrix and tissue strength of homografts.

The effect of decellularisation on the real time mechanical fatigue of porcine aortic heart valve roots

Decellularised heart valve roots offer a promising option for heart valve replacement in young patients, having the potential to remodel and repair. Replacement heart valves have to undergo billions of opening and closing cycles throughout the patient’s lifetime. Therefore, understanding the effect of cyclic loading on decellularised heart valve roots is important prior to human implantation. The aim of this preliminary study was to investigate the influence of low concentration sodium dodecyl sulphate (SDS) decellularisation treatment on the in vitro real time mechanical fatigue of porcine aortic heart valve roots under physiological real time cyclic loading conditions. This required a specific real time in vitro method to be developed, since previous methods relied on accelerated testing, which is non-physiological, and not appropriate for valve replacement materials that exhibit time dependent characteristics. The effects of the real time fatigue on hydrodynamic function and mechanical properties of the heart valve roots were assessed. The mechanical fatigue of decellularised porcine aortic heart valve roots (n = 6) was assessed and compared to cellular porcine aortic heart valve roots (n = 6) in a modified Real time Wear Tester (RWT) at a physiological frequency and under cyclic pressure conditions for a maximum of 1.2 million cycles. Periodically, the heart valve roots were removed from the RWT to assess the influence of cyclic loading on valve competency (static leaflet closure). At the end of testing further hydrodynamic performance parameters were ascertained, along with determination of leaflet material properties. A real time mechanical fatigue assessment method was developed and applied; with two cellular and two decellularised porcine aortic leaflets in different heart valve roots showing tears in the belly region. The decellularised aortic heart valve roots exhibited comparative functionality to the cellular heart valve roots under in vitro static and pulsatile hydrodynamic conditions. However, the material properties of the decellularised aortic leaflets were significantly altered following cyclic fatigue assessment and showed increases in elastin and collagen phase slopes and ultimate tensile strength compared to the cellular porcine aortic leaflets in the circumferential direction. This preliminary study demonstrated that low concentration SDS decellularised porcine aortic heart valve roots can withstand physiological cyclic deformations up to 1.2 million cycles in a RWT whilst maintaining their overall hydrodynamic function and leaflet mechanical properties. This is the first full report of preclinical mechanical fatigue assessment of decellularised porcine aortic heart valve roots under physiological real time conditions.

A New Decellularization Protocol of Porcine Aortic Valves Using Tergitol to Characterize the Scaffold with the Biocompatibility Profile Using Human Bone Marrow Mesenchymal Stem Cells

The most common aortic valve diseases in adults are stenosis due to calcification and regurgitation. In pediatric patients, aortic pathologies are less common. When a native valve is surgically replaced by a prosthetic one, it is necessary to consider that the latter has a limited durability. In particular, current bioprosthetic valves have to be replaced after approximately 10 years; mechanical prostheses are more durable but require the administration of permanent anticoagulant therapy. With regard to pediatric patients, both mechanical and biological prosthetic valves have to be replaced due to their inability to follow patients’ growth. An alternative surgical substitute can be represented by the acellular porcine aortic valve that exhibits less immunogenic risk and a longer lifespan. In the present study, an efficient protocol for the removal of cells by using detergents, enzyme inhibitors, and hyper- and hypotonic shocks is reported. A new detergent (Tergitol) was applied to replace TX-100 with the aim to reduce toxicity and maximize ECM preservation. The structural integrity and efficient removal of cells and nuclear components were assessed by means of histology, immunofluorescence, and protein quantification; biomechanical properties were also checked by tensile tests. After decellularization, the acellular scaffold was sterilized with a standard protocol and repopulated with bone marrow mesenchymal stem cells to analyze its biocompatibility profile.

The effectiveness and safety of pulmonary autograft as living tissue in Ross procedure: a systematic review

Background

Reports on effectiveness and safety after the implant of pulmonary autograft (PA) living tissue in Ross procedure, to treat both congenital and acquired disease of the aortic valve and left ventricular outflow tract (LVOT), show variable durability results. We undertake a quantitative systematic review of evidence on outcome after the Ross procedure with the aim to improve insight into outcome and potential determinants.

Methods

A systematic search of reports published from October 1979 to January 2021 was conducted (PubMed, Ovid Medline, Ovid Embase and Cochrane library) reporting outcomes after the Ross procedure in patients with diseased aortic valve with or without LVOT. Inclusion criteria were observational studies reporting on mortality and/or morbidity after autograft aortic valve or root replacement, completeness of follow-up >90%, and study size n≥30. Forty articles meeting the inclusion criteria were allocated to two categories: pediatric patient series and young adult patient series. Results were tabulated for a clearer presentation.

Results

A total of 342 studies were evaluated of which forty studies were included in the final analysis as per the eligibility criteria. A total of 8,468 patients were included (7,796 in pediatric cohort and young adult series and 672 in pediatric series). Late mortality rates were remarkably low alongside similar age-matched mortality with the general population in young adults. There were differences in implantation techniques as regard the variability in stress and the somatic growth that recorded conflicting outcomes regarding the miniroot vs the subcoronary approach.

Discussion

The adaptability of lung autograft to allow for both stress variability and somatic growth make it an ideal conduit for Ross's operation. The use of the miniroot technique over subcoronary implantation for better adaptability to withstand varying degrees of stress is perhaps more applicable to different patient subgroups.

Fibrous heart valve leaflet substrate with native-mimicked morphology

Tissue-engineered heart valves are a promising alternative solution to prosthetic valves. However, long-term functionalities of tissue-engineered heart valves depend on the ability to mimic the trilayered, oriented structure of native heart valve leaflets. In this study, using electrospinning, we developed trilayered microfibrous leaflet substrates with morphological characteristics similar to native leaflets. The substrates were implanted subcutaneously in rats to study the effect of their trilayered oriented structure on in vivo tissue engineering. The tissue constructs showed a well-defined structure, with a circumferentially oriented layer, a randomly oriented layer and a radially oriented layer. The extracellular matrix, produced during in vivo tissue engineering, consisted of collagen, glycosaminoglycans, and elastin, all major components of native leaflets. Moreover, the anisotropic tensile properties of the constructs were sufficient to bear the valvular physiological load. Finally, the expression of vimentin and α-smooth muscle actin, at the gene and protein level, was detected in the residing cells, revealing their growing state and their transdifferentiation to myofibroblasts. Our data support a critical role for the trilayered structure and anisotropic properties in functional leaflet tissue constructs, and indicate that the leaflet substrates have the potential for the development of valve scaffolds for heart valve replacements.

Comparison of the function and structural integrity of cryopreserved pulmonary homografts versus decellularized pulmonary homografts after 180 days implantation in the juvenile ovine model

Homograft availability and durability remain big challenges. Increasing the post-mortem ischaemic harvesting time beyond 24 h increases the potential donor pool. Cryopreservation, routinely used to preserve homografts, damages the extracellular matrix (ECM), contributing to valve degeneration. Decellularization might preserve the ECM, promoting host-cell infiltration and contributing towards better clinical outcomes. This study compared the performance of cryopreserved versus decellularized pulmonary homografts in the right ventricle outflow tract (RVOT) of a juvenile ovine model. Homografts (n = 10) were harvested from juvenile sheep, subjected to 48 h post-mortem cold ischaemia, cryopreserved or decellularized and implanted in the RVOT of juvenile sheep for 180 days. Valve performance was monitored echocardiographically. Explanted leaflet and wall tissue evaluated histologically, on electron microscopical appearance, mechanical properties and calcium content. In both groups the annulus diameter increased. Cryopreserved homografts developed significant (¾) pulmonary regurgitation, with trivial regurgitation (¼) in the decellularized group. Macroscopically, explanted cryopreserved valve leaflets retracted and thickened while decellularized leaflets remained thin and pliable with good coaptation. Cryopreserved leaflets and walls demonstrated loss of interstitial cells with collapsed collagen, and decellularized scaffolds extensive, uniform ingrowth of host-cells with an intact collagen network. Calcific deposits were shown only in leaflets and walls of cryopreserved explants. Young fibroblasts, with vacuoles and rough endoplasmic reticulum in the cytoplasm, repopulated the leaflets and walls of decellularized scaffolds. Young's modulus of wall tissue in both groups increased significantly. Cryopreserved valves deteriorate over time due to loss of cellularity and calcification, while decellularized scaffolds demonstrated host-cell repopulation, structural maintenance, tissue remodelling and growth potential.

Early results from a prospective, single-arm European trial on decellularized allografts for aortic valve replacement: the ARISE study and ARISE Registry data

OBJECTIVES

Decellularized aortic homografts (DAH) may provide an additional aortic valve replacement option for young patients due to their potential to overcome the high early failure rate of conventional allogenic and xenogenic aortic valve prostheses.

METHODS

A prospective, European Union-funded, single-arm, multicentre, safety study was conducted in 8 centres evaluating non-cryopreserved DAH for aortic valve replacement.

RESULTS

One hundred and forty-four patients (99 male) were prospectively enrolled between October 2015 and October 2018, mean age 33.6 ± 20.8 years; 45% had undergone previous cardiac operations. Mean implanted DAH diameter 22.6 ± 2.4 mm and mean durations for the operation, cardiopulmonary bypass and cross-clamp were 341 ± 140, 174 ± 80 and 126 ± 43 min, respectively. There were 2 early deaths (1 LCA thrombus on day 3 and 1 ventricular arrhythmia 5 h postop) and 1 late death due to endocarditis 4 months postoperatively, resulting in a total mortality of 2.08%. One pacemaker implantation was necessary and 1 DAH was successfully repaired after 6 weeks for early regurgitation following subcoronary implantation. All other DAH were implanted as a free-standing root. After a mean follow-up of 1.54 ± 0.81 years, the primary efficacy end points peak gradient (mean 11.8 ± 7.5 mmHg) and regurgitation (mean 0.42 ± 0.49, grade 0-3) were excellent. At 2.5 years, freedom from explantation/endocarditis/bleeding/stroke was 98.4 ± 1.1%/99.4 ± 0.6%/99.1 ± 0.9%/99.2 ± 0.8%, respectively, with results almost identical to those in an age-matched Ross operation cohort of 212 patients (mean age 34 years) despite DAH patients having undergone >2× more previous procedures.

CONCLUSIONS

The initial results of the prospective multicentre ARISE trial show DAH to be safe for aortic valve replacement with excellent haemodynamics in the short follow-up period.

Paediatric aortic valve replacement using decellularized allografts

OBJECTIVES

Options for paediatric aortic valve replacement (AVR) are limited if valve repair is not feasible. Results of paediatric Ross procedures are inferior to adult Ross results, and mechanical AVR imposes constant anticoagulation with the inherent risks.

METHODS

The study design was a prospective, multicentre follow-up of all paediatric patients receiving decellularized aortic homografts (DAHs) for AVR in 8 European centres.

RESULTS

A total of 106 children (77 boys) were operated (mean age 10.1 ± 4.8 years, DAH diameter 20.5 ± 3.8 mm). A total of 60 (57%) had undergone previous surgical interventions: 34 with 1, 15 with 2 and 11 with ≥3. There was one early death in a 12-year-old girl, who underwent her fourth aortic valve operation, due to intracerebral haemorrhage on extracorporeal membrane oxygenation after coronary reimplantation problems following 3-sinus reconstruction 1 year earlier. One 2-year-old patient died due to sepsis 2 months postoperatively with no evidence for endocarditis. In addition, a single pacemaker implantation was necessary and a 2.5-year-old girl underwent successful HTx due to chronic myocardial failure despite an intact DAH. After a mean follow-up of 3.30 ± 2.45 years, primary efficacy end points mean peak gradient (18.1 ± 20.9 mmHg) and regurgitation (mean 0.61 ± 0.63, grade 0-3) were very good. Freedom from death/explantation/endocarditis/bleeding/stroke at 5 years was 97.8 ± 1.6/85.0 ± 7.4/100/100/100% respectively. Calculated expected adverse events were lower for DAH compared to cryopreserved homograft patients (mean age 8.9 years), lower than in Ross patients (9.4 years) and in the same range as mechanical AVR (12.8 years).

CONCLUSIONS

Even though the overall number of paediatric DAH patients and the follow-up time span are still limited, our data suggest that DAHs may present a promising additional option for paediatric AVR.

Chemokine-Induced PBMC and Subsequent MSC Migration Toward Decellularized Heart Valve Tissue

PURPOSE

Enhancing the recellularization of a decellularized heart valve in situ may lead to an improved or ideal heart valve replacement. A promising approach is leveraging the immune response for inflammation-mediated recellularization. However, this mechanism has not been previously demonstrated in vitro.

METHODS

This study investigated loading the chemokine MCP-1 into decellularized porcine heart valve tissue and measured the migration of human peripheral blood mononuclear cells (PBMCs) and mesenchymal stem cells (MSCs) toward the chemokine loaded valve tissue.

RESULTS

The results of this study demonstrate that MCP-1-loaded tissues increase PBMC migration compared to non-loaded tissues. Additionally, we demonstrate MCP-1-loaded tissues that have recruited PBMCs lead to increased migration of MSCs compared to decellularized tissue alone.

CONCLUSION

The results of this study provide evidence for the inflammation-mediated recellularization mechanism. Furthermore, the results support the use of such an approach for enhancing the recellularization of a decellularized heart valve.

In vitro evaluation of surface biological properties of decellularized aorta for cardiovascular use

The aim of this study was to determine an in vitro evaluation method that could directly predict in vivo performance of decellularized tissue for cardiovascular use. We hypothesized that key factors for in vitro evaluation would be found by in vitro assessment of decellularized aortas that previously showed good performance in vivo, such as high patency. We chose porcine aortas, decellularized using three different decellularization methods: sodium dodecyl-sulfate (SDS), freeze-thawing, and high-hydrostatic pressurization (HHP). Immunohistological staining, a blood clotting test, scanning electron microscopy (SEM) analysis, and recellularization of endothelial cells were used for the in vitro evaluation. There was a significant difference in the remaining extracellular matrix (ECM) components, ECM structure, and the luminal surface structure between the three decellularized aortas, respectively, resulting in differences in the recellularization of endothelial cells. On the other hand, there was no difference observed in the blood clotting test. These results suggested that the blood clotting test could be a key evaluation method for the prediction of in vivo performance. In addition, evaluation of the luminal surface structure and the recellularization experiment should be packaged as an in vitro evaluation because the long-term patency was probably affected. The evaluation approach in this study may be useful to establish regulations and a quality management system for a cardiovascular prosthesis.

Transplantation of cryopreserved human heart valves in Europe: 30 years of banking in Brussels and future perspectives

For over 30 years, our TE has processed, controlled for quality and distributed cryopreserved allograft valves for human application. We present a review of this activity and future perspectives of cardiovascular tissue banking. The donor age and medical/behavioral history are in compliance with the regulations of the EUMS. Allograft morphology and function are evaluated in a class A cleanroom. Tests for viral/bacterial infection, histological control of structure/infection/malignancy and control-rate cryopreservation are performed. A total of 7562 hearts were sent to our TE, whereas 7290 valves (pulmonary, aortic and mitral) were transplanted. The donations increased over time: 1934, 2566 and 3062 hearts were donated during the first, second and third decades (increases of 32.7 and 19.3% during the second and third decades). Likewise, there was a significant increase in transplantations with 2050, 2550 and 2690 valves implanted during the first, second and third decades (24.4 and 5.5% increase during the second and third decades). A total of 4475 pulmonary (61.4%), 2760 aortic (37.9%) and 55 mitral valves (0.7%) were transplanted. Outstanding long-term results in adults and evidence of immune-related deterioration of allografts in neonates and infants were demonstrated. Decellularization was suggested as a solution. One hundred pulmonary and 180 aortic valves were sent for transplantation after decellularization for the ESPOIR and ARISE clinical trials and beyond. The donation and transplantation activity increased progressively. Although cryopreserved valves represent the best substitute for diseased valves, accelerated failure appears after implantation in neonates and infants. The implementation of new technologies, such as decellularization, as a standard procedure for treatment of allograft valves will offer further improvements in allograft quality and increase of durability.

Characterization of Laminins in Healthy Human Aortic Valves and a Modified Decellularized Rat Scaffold

Aortic valve stenosis is one of the most common cardiovascular diseases in western countries and can only be treated by replacement with a prosthetic valve. Tissue engineering is an emerging and promising treatment option, but in-depth knowledge about the microstructure of native heart valves is lacking, making the development of tissue-engineered heart valves challenging. Specifically, the basement membrane (BM) of heart valves remains incompletely characterized, and decellularization protocols that preserve BM components are necessary to advance the field. This study aims to characterize laminin isoforms expressed in healthy human aortic valves and establish a small animal decellularized aortic valve scaffold for future studies of the BM in tissue engineering. Laminin isoforms were assessed by immunohistochemistry with antibodies specific for individual α, β, and γ chains. The results indicated that LN-411, LN-421, LN-511, and LN-521 are expressed in human aortic valves (n = 3), forming a continuous monolayer in the endothelial BM, whereas sparsely found in the interstitium. Similar results were seen in rat aortic valves (n = 3). Retention of laminin and other BM components, concomitantly with effective removal of cells and residual DNA, was achieved through 3 h exposure to 1% sodium dodecyl sulfate and 30 min exposure to 1% Triton X-100, followed by nuclease processing in rat aortic valves (n = 3). Our results provide crucial data on the microenvironment of valvular cells relevant for research in both tissue engineering and heart valve biology. We also describe a decellularized rat aortic valve scaffold useful for mechanistic studies on the role of the BM in heart valve regeneration.

Decellularized tissue-engineered heart valves calcification: what do animal and clinical studies tell us?

Cardiovascular diseases are the first cause of death worldwide. Among different heart malfunctions, heart valve failure due to calcification is still a challenging problem. While drug-dependent treatment for the early stage calcification could slow down its progression, heart valve replacement is inevitable in the late stages. Currently, heart valve replacements involve mainly two types of substitutes: mechanical and biological heart valves. Despite their significant advantages in restoring the cardiac function, both types of valves suffered from serious drawbacks in the long term. On the one hand, the mechanical one showed non-physiological hemodynamics and the need for the chronic anticoagulation therapy. On the other hand, the biological one showed stenosis and/or regurgitation due to calcification. Nowadays, new promising heart valve substitutes have emerged, known as decellularized tissue-engineered heart valves (dTEHV). Decellularized tissues of different types have been widely tested in bioprosthetic and tissue-engineered valves because of their superior biomechanics, biocompatibility, and biomimetic material composition. Such advantages allow successful cell attachment, growth and function leading finally to a living regenerative valvular tissue in vivo. Yet, there are no comprehensive studies that are covering the performance of dTEHV scaffolds in terms of their efficiency for the calcification problem. In this review article, we sought to answer the question of whether decellularized heart valves calcify or not. Also, which factors make them calcify and which ones lower and/or prevent their calcification. In addition, the review discussed the possible mechanisms for dTEHV calcification in comparison to the calcification in the native and bioprosthetic heart valves. For this purpose, we did a retrospective study for all the published work of decellularized heart valves. Only animal and clinical studies were included in this review. Those animal and clinical studies were further subcategorized into 4 categories for each depending on the effect of decellularization on calcification. Due to the complex nature of calcification in heart valves, other in vitro and in silico studies were not included. Finally, we compared the different results and summed up all the solid findings of whether decellularized heart valves calcify or not. Based on our review, the selection of the proper heart valve tissue sources (no immunological provoking residues), decellularization technique (no damaged exposed residues of the decellularized tissues, no remnants of dead cells, no remnants of decellularizing agents) and implantation techniques (avoiding suturing during the surgical implantation) could provide a perfect anticalcification potential even without in vitro cell seeding or additional scaffold treatment.

Decellularized Intervertebral Discs: A Potential Replacement for Degenerate Human Discs

Intervertebral disc (IVD) degeneration is a major cause of back pain. Current surgical interventions have limitations. An alternative approach is to replace degenerated IVDs with a natural biological scaffold. The removal of cellular components from human IVDs should render them nonimmunogenic upon implantation. The aim of this initial proof of technical feasibility study was to develop a decellularization protocol on bovine IVDs with endplates (EPs) and assess protocol performance before application of the protocol to human IVDs with attached EP and vertebral bone (VB). A decellularization protocol based on hypotonic low concentration sodium dodecyl sulfate (0.1% w/v) with proteinase inhibitors, freeze/thaw cycles, and nuclease and sonication treatments was applied to IVDs. Histological, biochemical, and biomechanical comparisons were made between cellular and decellularized tissue. Cell removal from bovine IVDs was demonstrated and total DNA levels of the decellularized inner annulus fibrosus (iAF), outer annulus fibrosus (oAF), and EP were 40.7 (±11.4), 25.9 (±3.8), and 29.3 (±3.1) ng.mg⁻¹ dry tissue weight, respectively (n = 6, ±95% confidence level [CL]). These values were significantly lower than in cellular tissue. No significant difference in DNA levels between bovine cellular and decellularized nucleus pulposus (NP) was found. Glycosaminoglycans (GAGs) were largely retained in the NP, iAF, and oAF. Cyclic compression testing showed sufficient sensitivity to detect an increase in stiffness of bovine IVD postdecellularization (2957.2 ± 340.8 N.mm⁻¹) (predecellularization: 2685.4 ± 263.1 N.mm⁻¹; n = 5, 95% CL), but the difference was within natural tissue variation. Total DNA levels for all decellularized tissue regions of human IVDs (NP, iAF, oAF, EP, and VB) were below 50 ng.mg⁻¹ dry tissue weight (range: 2 ng.mg⁻¹, iAF to 29 ng.mg⁻¹, VB) and the tissue retained high levels of GAGs. Further studies to assess the biocompatibility and regenerative potential of decellularized human IVDs in vitro and in vivo are now required; however, proof of technical feasibility has been demonstrated and the retention of bone in the IVD samples would allow incorporation of the tissue into the recipient spine.

Revisiting the guidelines and choice the ideal substitute for aortic valve endocarditis

Aortic valve replacement is the most commonly performed cardiac surgical operation worldwide for infective endocarditis (IE). Long-term durability and avoidance of infection relapse are the treatment goals. However, no detailed guidelines on prosthesis selection and surgical strategy are available. Management should be guided by a comprehensive evaluation of infection extension and its microbiological characteristics, the clinical profile of the patient and the risk of infection recurrence. We conducted a literature search of the PubMed database, EMBASE and Cochrane Library (through November 2019) for studies reporting to the use of biological substitutes in aortic valve endocarditis (AVE). Studies comparing long-term outcomes in the use of allogenic and autologous with conventional prostheses were investigated. Conventional mechanical or stented xenografts are the preferred choice for localized aortic infection. In cases of complex IE with the involvement of the root or the aorto-mitral continuity, the use of homografts are recommended, according to surgeon's and center experience. Homograft use needs to be balanced against the risk of structural degeneration. Prosthetic bioroot or prosthetic valved conduit with a mechanical or bioprosthetic valve are acceptable alternatives. The choice of aortic valves substitute and surgical strategy in IE is multifaceted. Principles guiding the selection of prosthesis and surgical approach rely on the long-term durability and the avoidance of infection relapse. A decisional algorithm considering the extension of the infection and its microbiological characteristics, the clinical profile of the patient and the risk of infection recurrence is provided. A multidisciplinary effort is required to achieve consistent outcomes.

Next-generation tissue-engineered heart valves with repair, remodelling and regeneration capacity

Valvular heart disease is a major cause of morbidity and mortality worldwide. Surgical valve repair or replacement has been the standard of care for patients with valvular heart disease for many decades, but transcatheter heart valve therapy has revolutionized the field in the past 15 years. However, despite the tremendous technical evolution of transcatheter heart valves, to date, the clinically available heart valve prostheses for surgical and transcatheter replacement have considerable limitations. The design of next-generation tissue-engineered heart valves (TEHVs) with repair, remodelling and regenerative capacity can address these limitations, and TEHVs could become a promising therapeutic alternative for patients with valvular disease. In this Review, we present a comprehensive overview of current clinically adopted heart valve replacement options, with a focus on transcatheter prostheses. We discuss the various concepts of heart valve tissue engineering underlying the design of next-generation TEHVs, focusing on off-the-shelf technologies. We also summarize the latest preclinical and clinical evidence for the use of these TEHVs and describe the current scientific, regulatory and clinical challenges associated with the safe and broad clinical translation of this technology.

Progressive Reinvention or Destination Lost? Half a Century of Cardiovascular Tissue Engineering

The concept of tissue engineering evolved long before the phrase was forged, driven by the thromboembolic complications associated with the early total artificial heart programs of the 1960s. Yet more than half a century of dedicated research has not fulfilled the promise of successful broad clinical implementation. A historical account outlines reasons for this scientific impasse. For one, there was a disconnect between distinct eras each characterized by different clinical needs and different advocates. Initiated by the pioneers of cardiac surgery attempting to create neointimas on total artificial hearts, tissue engineering became fashionable when vascular surgeons pursued the endothelialisation of vascular grafts in the late 1970s. A decade later, it were cardiac surgeons again who strived to improve the longevity of tissue heart valves, and lastly, cardiologists entered the fray pursuing myocardial regeneration. Each of these disciplines and eras started with immense enthusiasm but were only remotely aware of the preceding efforts. Over the decades, the growing complexity of cellular and molecular biology as well as polymer sciences have led to surgeons gradually being replaced by scientists as the champions of tissue engineering. Together with a widening chasm between clinical purpose, human pathobiology and laboratory-based solutions, clinical implementation increasingly faded away as the singular endpoint of all strategies. Moreover, a loss of insight into the healing of cardiovascular prostheses in humans resulted in the acceptance of misleading animal models compromising the translation from laboratory to clinical reality. This was most evident in vascular graft healing, where the two main impediments to the in-situ generation of functional tissue in humans remained unheeded–the trans-anastomotic outgrowth stoppage of endothelium and the build-up of an impenetrable surface thrombus. To overcome this dead-lock, research focus needs to shift from a biologically possible tissue regeneration response to one that is feasible at the intended site and in the intended host environment of patients. Equipped with an impressive toolbox of modern biomaterials and deep insight into cues for facilitated healing, reconnecting to the “user needs” of patients would bring one of the most exciting concepts of cardiovascular medicine closer to clinical reality.

The Potential Impact and Timeline of Engineering on Congenital Interventions

Congenital interventional cardiology has seen rapid growth in recent decades due to the expansion of available medical devices. Percutaneous interventions have become standard of care for many common congenital conditions. Unfortunately, patients with congenital heart disease often require multiple interventions throughout their lifespan. The availability of transcatheter devices that are biodegradable, biocompatible, durable, scalable, and can be delivered in the smallest sized patients will rely on continued advances in engineering. The development pipeline for these devices will require contributions of many individuals in academia and industry including experts in material science and tissue engineering. Advances in tissue engineering, bioresorbable technology, and even new nanotechnologies and nitinol fabrication techniques which may have an impact on the field of transcatheter congenital device in the next decade are summarized in this review. This review highlights recent advances in the engineering of transcatheter-based therapies and discusses future opportunities for engineering of transcatheter devices.

Non-physiologic Bioreactor Processing Conditions for Heart Valve Tissue Engineering

PURPOSE

Conventional methods of seeding decellularized heart valves for heart valve tissue engineering have led to inconsistent results in interstitial cellular repopulation, particularly of the distal valve leaflet, and notably distinct from documented re-endothelialization. The use of bioreactor conditioning mimicking physiologic parameters has been well explored but cellular infiltration remains challenging. Non-characteristic, non-physiologic conditioning parameters within a bioreactor, such as hypoxia and cyclic chamber pressure, may be used to increase the cellular infiltration leading to increased recellularization.

METHODS

To investigate the effects of novel and perhaps non-intuitive bioreactor conditioning parameters, ovine aortic heart valves were seeded with mesenchymal stem cells and cultured in one of four environments: hypoxia and high cyclic pressures (120 mmHg), normoxia and high cyclic pressures, hypoxia and negative cyclic pressures (- 20 mmHg), and normoxia and negative cyclic pressures. Analysis included measurements of cellular density, cell phenotype, and biochemical concentrations.

RESULTS

The results revealed that the bioreactor conditioning parameters influenced the degree of recellularization. Groups that implemented hypoxic conditioning exhibited increased cellular infiltration into the valve leaflet tissue compared to normoxic conditioning, while pressure conditioning did not have a significant effect of recellularization. Protein expression across all groups was similar, exhibiting a stem cell and valve interstitial cell phenotype. Biochemical analysis of the extracellular matrix was similar between all groups.

CONCLUSION

These results suggest the use of non-physiologic bioreactor conditioning parameters can increase in vitro recellularization of tissue engineered heart valve leaflets. Particularly, hypoxic culture was found to increase the cellular infiltration. Therefore, bioreactor conditioning of tissue engineered constructs need not always mimic physiologic conditions, and it is worth investigating novel or uncharacteristic culture conditions as they may benefit aspects of tissue culture.

Influence of Laminin Coating on the Autologous In Vivo Recellularization of Decellularized Vascular Protheses

Decellularization of non-autologous biological implants reduces the immune response against foreign tissue. Striving for in vivo repopulation of aortic prostheses with autologous cells, thereby improving the graft biocompatibility, we examined surface coating with laminin in a standardized rat implantation model. Detergent-decellularized aortic grafts from donor rats (n = 37) were coated with laminin and systemically implanted into Wistar rats. Uncoated implants served as controls. Implant re-colonization and remodeling were examined by scanning electron microscopy (n = 10), histology and immunohistology (n = 18). Laminin coating persisted over eight weeks. Two weeks after implantation, no relevant neoendothelium formation was observed, whereas it was covering the whole grafts after eight weeks, with a significant acceleration in the laminin group (p = 0.0048). Remarkably, the intima-to-media ratio, indicating adverse hyperplasia, was significantly diminished in the laminin group (p = 0.0149). No intergroup difference was detected in terms of medial recellularization (p = 0.2577). Alpha-smooth muscle actin-positive cells originating from the adventitial surface invaded the media in both groups to a similar extent. The amount of calcifying hydroxyapatite deposition in the intima and the media did not differ between the groups. Inflammatory cell markers (CD3 and CD68) proved negative in coated as well as uncoated decellularized implants. The coating of decellularized aortic implants with bioactive laminin caused an acceleration of the autologous recellularization and a reduction of the intima hyperplasia. Thereby, laminin coating seems to be a promising strategy to enhance the biocompatibility of tissue-engineered vascular implants.

State of the Art: Tissue Engineering in Congenital Heart Surgery

Congenital heart disease is the leading cause of death secondary to congenital abnormalities in the United States and the incidence has increased significantly over the last 50 years. For those defects requiring surgical repair, bioprosthetic xenografts, allografts, and synthetic materials have traditionally been used. However, none of these modalities offer the potential for growth and accommodation within the pediatric population. Tissue engineering has been an area of great interest in a variety of cardiac applications as an innovative solution to create a product that can grow and regenerate within the body over time. Over the last 30 years, the original tissue engineering paradigm of a scaffold seeded with cells and cultured in a bioreactor has been expanded upon to include innovative methods of decellularization and production of "off-the-shelf" tissue-engineered products capable of in situ host cell repopulation. Despite progress in conceptual design and promising clinical results, widespread use of tissue-engineered products remains limited due to both regulatory and ongoing scientific challenges. Here, we describe the current state of the art with regards to in vitro, in vivo, and in situ tissue engineering as applicable within the field of congenital heart surgery and provide a brief overview of challenges and future directions.

Ectopic mineralization in heart valves: new insights from in vivo and in vitro procalcific models and promising perspectives on noncalcifiable bioengineered valves

Ectopic calcification of native and bioprosthetic heart valves represents a major public health problem causing severe morbidity and mortality worldwide. Valve procalcific degeneration is known to be caused mainly by calcium salt precipitation onto membranes of suffering non-scavenged cells and dead-cell-derived products acting as major hydroxyapatite nucleators. Although etiopathogenesis of calcification in native valves is still far from being exhaustively elucidated, it is well known that bioprosthesis mineralization may be primed by glutaraldehyde-mediated toxicity for xenografts, cryopreservation-related damage for allografts and graft immune rejection for both. Instead, mechanical valves, which are free from calcification, are extremely thrombogenic, requiring chronic anticoagulation therapies for transplanted patients. Since surgical substitution of failed valves is still the leading therapeutic option, progressive improvements in tissue engineering techniques are crucial to attain readily available valve implants with good biocompatibility, proper functionality and long-term durability in order to meet the considerable clinical demand for valve substitutes. Bioengineered valves obtained from acellular non-valvular scaffolds or decellularized native valves are proving to be a compelling alternative to mechanical and bioprosthetic valve implants, as they appear to permit repopulation by the host's own cells with associated tissue remodelling, growth and repair, besides showing less propensity to calcification and adequate hemodynamic performances. In this review, insights into valve calcification onset as revealed by in vivo and in vitro procalcific models are updated as well as advances in the field of valve bioengineering.

In Vivo Response of Acellular Porcine Pericardial for Tissue Engineered Transcatheter Aortic Valves

Current heart valve prostheses have limitations that include durability, inability to grow in pediatric patients, and lifelong anticoagulation. Transcatheter aortic valve replacements are minimally invasive procedures, and therefore have emerged as an alternative to traditional valve prostheses. In this experiment, the regenerative capacity of potential tissue engineered transcatheter valve scaffolds (1) acellular porcine pericardium and (2) mesenchymal stem cell-seeded acellular porcine pericardium were compared to native porcine aortic valve cusps in a rat subcutaneous model for up to 8 weeks. Immunohistochemistry, extracellular matrix evaluation, and tissue biomechanics were evaluated on the explanted tissue. Acellular valve scaffolds expressed CD163, CD31, alpha smooth muscle actin, and vimentin at each time point indicating host cell recellularization; however, MSC-seeded tissue showed greater recellularization. Inflammatory cells were observed with CD3 biomarker in native porcine pericardial tissue throughout the study. No inflammation was observed in either acellular or MSC-seeded scaffolds. There was no mechanical advantage observed in MSC-seeded tissue; however after the first week post-explant, there was a decrease in mechanical properties in all groups (p < 0.05). MSC-seeded and acellular porcine pericardium expressed decreased inflammatory response and better host-cell recellularization compared to the native porcine aortic valve cusps.

Detergent-based decellularization strategy preserves macro- and microstructure of heart valves

OBJECTIVES

Biological tissue has great potential to function as bioprostheses in patients for heart valve replacement. As these matrices are mainly xenogenic, the immunogenicity needs to be reduced by decellularization steps. Reseeding of bioscaffolds has tremendous potential to prevent calcification upon implantation, so intact microstructure of the material is mandatory. An optimal decellularization protocol of heart valves resulting in adequate preservation of the extracellular architecture has still not been developed. Biological scaffolds must be decellularized to remove the antigenic potential while preserving the complex mixture of structural and functional proteins that constitute the extracellular matrix.

METHODS

Here, we compared 3 different decellularization strategies for their efficiency to remove cells completely while preserving the porcine heart valve ultrastructure. Porcine pulmonary heart valves were treated either with trypsin-ethylenediaminetetraacetic acid (TRP), a protocol using detergents in combination with nucleases (DET + ENZ), or with Accutase® solution followed by nuclease treatment (ACC + ENZ). The treated heart valves then were subjected to histological, DNA and scanning electron microscopic analyses.

RESULTS

All DNA fragments were removed after ACC + ENZ treatment, whereas cellular removal was incomplete in the TRP group. TRP and ACC + ENZ-treated valves were enlarged and showed a disrupted architecture and degraded ultrastructure. In contrast, fully acellular heart valves with intact architecture, layer composition and surface topography were achieved with DET + ENZ treatment. DET + ENZ treatment yielded excellent results in terms of preservation of material architecture and removal of DNA content.

CONCLUSIONS

Compared to TRP and ACC + ENZ procedures, DET + ENZ-treated porcine pulmonary heart valves demonstrated well-preserved macroscopic structures and microscopic matrix components and represent an excellent scaffold for further application in tissue engineering.

Tissue-Engineered Grafts from Human Decellularized Extracellular Matrices: A Systematic Review and Future Perspectives

Tissue engineering and regenerative medicine involve many different artificial and biologic materials, frequently integrated in composite scaffolds, which can be repopulated with various cell types. One of the most promising scaffolds is decellularized allogeneic extracellular matrix (ECM) then recellularized by autologous or stem cells, in order to develop fully personalized clinical approaches. Decellularization protocols have to efficiently remove immunogenic cellular materials, maintaining the nonimmunogenic ECM, which is endowed with specific inductive/differentiating actions due to its architecture and bioactive factors. In the present paper, we review the available literature about the development of grafts from decellularized human tissues/organs. Human tissues may be obtained not only from surgery but also from cadavers, suggesting possible development of Human Tissue BioBanks from body donation programs. Many human tissues/organs have been decellularized for tissue engineering purposes, such as cartilage, bone, skeletal muscle, tendons, adipose tissue, heart, vessels, lung, dental pulp, intestine, liver, pancreas, kidney, gonads, uterus, childbirth products, cornea, and peripheral nerves. In vitro recellularizations have been reported with various cell types and procedures (seeding, injection, and perfusion). Conversely, studies about in vivo behaviour are poorly represented. Actually, the future challenge will be the development of human grafts to be implanted fully restored in all their structural/functional aspects.

Successful decellularization of thick-walled tissue: Highlighting pitfalls and the need for a multifactorial approach

INTRODUCTION:

Decellularization of thick tissue is challenging and varying. Therefore, we tried to establish a multifactorial approach for reliable aortic wall decellularization.

METHODS:

Porcine aortic walls were decellularized according to different procedures. Decellularization was performed for 24 (G1), 48 (G2), and 72 h (G3) with a solution of 0.5% desoxycholate and 0.5% dodecyl sulfate. The procedure was characterized using intermittent washing steps, the inclusion of sonication as well as DNase and α-galactosidase treatment. The decellularization efficiency was measured by the evaluation of 4',6-diamidino-2-phenylindole and hematoxylin and eosin staining and quantitative DNA assays. Pentachrome and picrosirius red staining, scanning electron microscopy as well as glycosaminoglycan assays were performed to evaluate the effect of the procedure on the extracellular matrix.

RESULTS:

4',6-Diamidino-2-phenylindole and hematoxylin and eosin staining revealed a large amount of remaining nuclei in all groups. However, consecutive DNase treatment had a significant effect. While the remaining DNA was detected in some samples of G1 and G2, samples of G3 were fully decellularized. Glycosaminoglycan content was significantly reduced to 50% after 24 h (G1) but remained constant for G2 and G3. Picrosirius red staining revealed an intact and stable collagen network without any visible defects. Pentachrome staining substantiated these results. Nonetheless, the fiber network remains intact, which could be confirmed by reflection electron microscopy analysis.

CONCLUSION:

In this study, we developed a procedure that grants successful decellularization of porcine aortic wall while maintaining the fibrous microstructure. We highlighted the significant effect of DNase and α-galactosidase treatment. In addition, we could show the need for a multifactorial treatment and comprehensive evaluation protocols for thick tissue decellularization.

Development and characterisation of a large diameter decellularised vascular allograft

The aims of this study were to develop a biological large diameter vascular graft by decellularisation of native human aorta to remove the immunogenic cells whilst retaining the essential biomechanical, and biochemical properties for the ultimate benefit of patients with infected synthetic grafts. Donor aortas (n = 6) were subjected to an adaptation of a propriety decellularisation process to remove the cells and acellularity assessed by histological analysis and extraction and quantification of total DNA. The biocompatibility of the acellular aortas was determined using standard contact cytotoxicity tests. Collagen and denatured collagen content of aortas was determined and immunohistochemistry was used to determine the presence of specific extracellular matrix proteins. Donor aortas (n = 6) were divided into two, with one half subject to decellularisation and the other half retained as native tissue. The native and decellularised aorta sections were then subject to uniaxial tensile testing to failure [axial and circumferential directions] and suture retention testing. The data was compared using a paired t-test. Histological evaluation showed an absence of cells in the treated aortas and retention of histoarchitecture including elastin content. The decellularised aortas had less than 15 ng mg-1 total DNA per dry weight (mean 94% reduction) and were biocompatible as determined by in vitro contact cytotoxicity tests. There were no gross changes in the histoarchitecture [elastin and collagen matrix] of the acellular aortas compared to native controls. The decellularisation process also reduced calcium deposits within the tissue. The uniaxial tensile and suture retention testing revealed no significant differences in the material properties (p > 0.05) of decellularised aorta. The decellularisation procedure resulted in minimal changes to the biological and biomechanical properties of the donor aortas. Acellular donor aorta has excellent potential for use as a large diameter vascular graft.

Decellularized mitral valve in a long-term sheep model

OBJECTIVES

The objective of this study was to evaluate surgical handling, in vivo hemodynamic performance and morphological characteristics of decellularized mitral valves (DMVs) in a long-term sheep model.

METHODS

Ovine mitral valves were decellularized using detergents and β-mercaptoethanol. Orthotopic implantations were performed in 6-month-old sheep (41.3 ± 1.2 kg, n = 11) without annulus reinforcement. Commercially available stented porcine aortic valves [biological mitral valve (BMV), n = 3] were implanted conventionally and used as controls. Valve function was evaluated by transoesophageal echocardiography and explants were investigated by a routine bright field microscopy and immunofluorescent histology.

RESULTS

During implantation, 2 DMVs required cleft closure of the anterior leaflet. All valves were competent on water test and early postoperative transoesophageal echocardiography. Six animals (DMV, n = 4; BMV, n = 2) survived 12 months. Six animals died within the first 4 months due to valve-related complications. At 12 months, transoesophageal echocardiography revealed severe degeneration in all BMVs. Macroscopically, BMV revealed calcification at the commissures and leaflet insertion area. Histological examination showed sporadic cells negative for endothelial nitric oxide synthase, von Willebrand factor and CD45 on their surface. In contrast, DMV showed no calcification or stenosis, and the regurgitation was trivial to moderate in all animals. Fibrotic hardening occurred only along the suture line of the valve annulus, immunostaining revealed collagen IV covering the entire leaflet surface and a repopulation with endothelial cells.

CONCLUSIONS

Surgical implantation of DMV is feasible and results in good early graft function. Additional in vivo investigations are required to minimize the procedure-related complications and to increase the reproducibility of surgical implantation. Degenerative profile of allogeneic DMV is superior to commercially available porcine aortic prosthesis.

Long-term outcome of cryopreserved allograft for aortic valve replacement

OBJECTIVE

The most efficient surgical approach to severe aortic valve disease in the young adult is still debated: cryopreserved aortic allograft offers excellent hemodynamic and avoid anticoagulation, but long-term durability is influenced by structural valve deterioration (SVD). This study aimed to describe long-term results of aortic allografts and to identify factors influencing long-term durability.

METHODS

From January 1993 to August 2010, 210 patients underwent aortic allograft replacement via the free-hand subcoronary implantation technique (N = 55) or root replacement with coronary reimplantation (N = 155). Clinic and echocardiographic follow-up was updated to April 2016.

RESULTS

Overall mortality and cardiac mortality occurred in 80 (38.1%) and 64 (30.5%) patients, respectively. Reoperation was required in 69 cases (32.8%), whereas SVD required reoperation in 57 cases (27.1%). No early endocarditis occurred, whereas late endocarditis occurred in 4 patients. The free-hand technique seems to be associated with improved left ventricular remodeling compared with the root-replacement technique, and smaller allograft size represents a predictor of reoperation independently on the surgical technique used. In the overall population, there were 44 women of childbearing age, and 37 patients remained pregnant during the follow-up of the study. No differences were found in the clinical outcomes among women who had children and who did not.

CONCLUSIONS

Cryopreserved allograft is a valid option, especially in complex infective endocarditis and in women of childbearing age. A careful choice of allograft size and implantation technique can reduce the risk of SVD.

Extended bioreactor conditioning of mononuclear cell-seeded heart valve scaffolds

The tissue-engineered heart valve may be the ideal valve replacement option but still must overcome challenges in leaflet recellularization. This study sought to investigate the potential for leaflet matrix restoration and repopulation following mononuclear cell seeding and extended periods of bioreactor conditioning. Human aortic heart valves were seeded with mononuclear cells and conditioned in a pulsatile bioreactor for 3 days, 3 weeks, or 6 weeks. The results of this study determined that a mononuclear cell population can be readily localized within the leaflet tissue in as little as 3 days. Furthermore, as extended bioreactor condition continued to the 3- and 6-week time points, the mesenchymal stem cell subfraction proliferated and appeared to become the predominant cell phenotype. This was evident through positive expression of mesenchymal stem cell markers and no expression of mononuclear cell markers observed by immunohistochemistry in the 3- and 6-week groups. In addition, cells in the 3- and 6-week groups exhibited an up-regulation of mesenchymal stem cell–associated genes (THY1, NT5E, and ITGB1) and a down-regulation of mononuclear cell–associated genes (CD14, ICAM1, and PECAM1) compared to the initial seeded cell population. However, repopulation of the leaflet interstitium was less extensive than anticipated. Valves in the 6-week time point also exhibited retracted leaflets. Thus, while the 3-week bioreactor-conditioning period used in this study may hold some promise, a bioreactor-conditioning period of 6 weeks is not a viable option for clinical translation due to the negative impact on valve performance.

Cardiovascular tissue engineering: From basic science to clinical application

Valvular heart disease is an increasing population health problem and, especially in the elderly, a significant cause of morbidity and mortality. The current treatment options, such as mechanical and bioprosthetic heart valve replacements, have significant restrictions and limitations. Considering the increased life expectancy of our aging population, there is an urgent need for novel heart valve concepts that remain functional throughout life to prevent the need for reoperation. Heart valve tissue engineering aims to overcome these constraints by creating regenerative, self-repairing valve substitutes with life-long durability. In this review, we give an overview of advances in the development of tissue engineered heart valves, and describe the steps required to design and validate a novel valve prosthesis before reaching first-in-men clinical trials. In-silico and in-vitro models are proposed as tools for the assessment of valve design, functionality and compatibility, while in-vivo preclinical models are required to confirm the remodeling and growth potential of the tissue engineered heart valves. An overview of the tissue engineered heart valve studies that have reached clinical translation is also presented. Final remarks highlight the possibilities as well as the obstacles to overcome in translating heart valve prostheses into clinical application.

Tissue-Engineered Heart Valves: A Call for Mechanistic Studies

Heart valve disease carries a substantial risk of morbidity and mortality. Outcomes are significantly improved by valve replacement, but currently available mechanical and biological replacement valves are associated with complications of their own. Mechanical valves have a high rate of thromboembolism and require lifelong anticoagulation. Biological prosthetic valves have a much shorter lifespan, and they are prone to tearing and degradation. Both types of valves lack the capacity for growth, making them particularly problematic in pediatric patients. Tissue engineering has the potential to overcome these challenges by creating a neovalve composed of native tissue that is capable of growth and remodeling. The first tissue-engineered heart valve (TEHV) was created more than 20 years ago in an ovine model, and the technology has been advanced to clinical trials in the intervening decades. Some TEHVs have had clinical success, whereas others have failed, with structural degeneration resulting in patient deaths. The etiologies of these complications are poorly understood because much of the research in this field has been performed in large animals and humans, and, therefore, there are few studies of the mechanisms of neotissue formation. This review examines the need for a TEHV to treat pediatric patients with valve disease, the history of TEHVs, and a future that would benefit from extension of the reverse translational trend in this field to include small animal studies.

Heart valve tissue engineering: an overview of heart valve decellularization processes

Despite recent advances in medicine and surgery, many people still suffer from cardiovascular diseases, which affect their life span and morbidity. Regenerative medicine and tissue engineering are novel approaches based on restoring or replacing injured tissues and organs with scaffolds, cells and growth factors. Scaffolds are acquired from two major sources, synthetic materials and naturally derived scaffolds. Biological scaffolds derived from native tissues and cell-derived matrix offer many advantages. They are more biocompatible with a higher affinity to cells, which facilitate tissue reconstruction. Interestingly, xenogeneic recipients generally tolerate their components. Therefore, heart valve tissue engineering is increasingly benefiting from naturally derived scaffolds. In this review, we investigated the different protocols and methods that have been used for heart valve decellularization.

Developing a Clinically Relevant Tissue Engineered Heart Valve-A Review of Current Approaches

Tissue engineered heart valves (TEHVs) have the potential to address the shortcomings of current implants through the combination of cells and bioactive biomaterials that promote growth and proper mechanical function in physiological conditions. The ideal TEHV should be anti-thrombogenic, biocompatible, durable, and resistant to calcification, and should exhibit a physiological hemodynamic profile. In addition, TEHVs may possess the capability to integrate and grow with somatic growth, eliminating the need for multiple surgeries children must undergo. Thus, this review assesses clinically available heart valve prostheses, outlines the design criteria for developing a heart valve, and evaluates three types of biomaterials (decellularized, natural, and synthetic) for tissue engineering heart valves. While significant progress has been made in biomaterials and fabrication techniques, a viable tissue engineered heart valve has yet to be translated into a clinical product. Thus, current strategies and future perspectives are also discussed to facilitate the development of new approaches and considerations for heart valve tissue engineering.

* A Rat Model for the In Vivo Assessment of Biological and Tissue-Engineered Valvular and Vascular Grafts

The demand for an improvement of the biocompatibility and durability of vascular and valvular implants requires translational animal models to study the in vivo fate of cardiovascular grafts. In the present article, a review on the development and application of a microsurgical rat model of infrarenal implantation of aortic grafts and aortic valved conduits is provided. By refinement of surgical techniques and inclusion of hemodynamic considerations, a functional model has been created, which provides a modular platform for the in vivo assessment of biological and tissue-engineered grafts. Through optional addition of procalcific diets, disease-inducing agents, and genetic modifications, complex multimorbidity scenarios mimicking the clinical reality in cardiovascular patients can be simulated. Applying this model, crucial aspects of the biocompatibility, biofunctionality and degeneration of vascular and valvular implants in dependency on graft preparation, and modification as well as systemic antidegenerative treatment of the recipient have been and will be addressed.

Recellularization of decellularized heart valves: Progress toward the tissue-engineered heart valve

The tissue-engineered heart valve portends a new era in the field of valve replacement. Decellularized heart valves are of great interest as a scaffold for the tissue-engineered heart valve due to their naturally bioactive composition, clinical relevance as a stand-alone implant, and partial recellularization in vivo. However, a significant challenge remains in realizing the tissue-engineered heart valve: assuring consistent recellularization of the entire valve leaflets by phenotypically appropriate cells. Many creative strategies have pursued complete biological valve recellularization; however, identifying the optimal recellularization method, including in situ or in vitro recellularization and chemical and/or mechanical conditioning, has proven difficult. Furthermore, while many studies have focused on individual parameters for increasing valve interstitial recellularization, a general understanding of the interacting dynamics is likely necessary to achieve success. Therefore, the purpose of this review is to explore and compare the various processing strategies used for the decellularization and subsequent recellularization of tissue-engineered heart valves.