Ischemic mitral regurgitation: a quantitative three-dimensional echocardiographic analysis

Mitral Valve Translocation: A Novel Operation for the Treatment of Secondary Mitral Regurgitation

BACKGROUND

Conventional annuloplasty repair of secondary (functional) ischemic mitral regurgitation (IMR) is associated with a 60% recurrence of moderate or greater mitral regurgitation at 2 years. We developed a novel repair technique for IMR that addresses the underlying geometric alterations of the mitral valve apparatus and compared outcomes with those of conventional repair in a swine model.

METHODS

Chronic IMR was induced by percutaneous embolization of the circumflex artery. Swine with severe IMR (median 9 weeks after infarction) underwent undersized rigid annuloplasty (n = 5) or translocation repair (n = 6). Translocation repair consisted of detaching the mitral valve en bloc at the annulus, creating a 1 cm wide frustum-shaped pericardial patch, and suturing the outer circumference of the patch to the annulus and inner circumference to the mitral valve.

RESULTS

Operative survival was 92% (11 of 12). All animals had none/trace residual central mitral regurgitation, and mean inflow gradients were similar (1 mm Hg [interquartile range, 1 to 2] vs 2 mm Hg [interquartile range, 1 to 2]; P = .75) in the annuloplasty and translocation groups, respectively. Median coaptation length marginally improved in conventional swine (3 to 4 mm, P = .05), but dramatically improved in translocation swine (3 to 8 mm, P = .003). Posterior leaflet angle increased from 39 to 80 degrees (P = .05) in annuloplasty swine but decreased from 50 to 31 degrees (P = .03) in translocation swine. The posterior leaflet was immobile after annuloplasty but had preserved motion after translocation (excursion, 1 degree vs 24 degrees; P = .045).

CONCLUSIONS

Mitral valve translocation effectively treats mitral regurgitation by relieving leaflet tethering. Compared with annuloplasty, mitral valve translocation creates a larger surface of coaptation and preserves leaflet mobility without compromising diastolic function.

The Carpentier-Edwards Classic and Physio Annuloplasty Rings in Repair of Degenerative Mitral Valve Disease: A Retrospective Study

Background

Physio ring (SR) is considered an improved version of the Classic rigid ring (RR). Today, SR is more widely used in mitral valve (MV) repair. We sought to compare the long-term outcomes of repair with RR and SR in degenerative mitral valve disease.

Methods

In a computerized registry of our institution, 306 patients had MV repair with either RR (139 patients) or SR (167 patients) ring between 2005 and 2015. Fifteen of them had concomitant tricuspid valve repair. Ninety-two (30.1%) had Barlow's disease and 214 (69.9%) had fibroelastic deficiency. The patients had similar demographic and echocardiographic characteristics.

Results

There were 4 (1.3%) operative mortalities. Mean follow-up time was 107.4 ± 13.2 months. Left ventricular end diastolic and end systolic diameters significantly improved in both groups but not between groups. Survival at 10 years was 84.6% (93.1% in RR and 91.5% in SR; p = 0.177) and 10-year freedom from recurrent MR ≥ 2+ was 74.5% (88.2% in RR and 86.3% in SR; p = 0.110). Reoperations for repair failure were 8 in RR and 6 in SR. By Cox regression analysis, Barlow's disease and preoperative MR = 4+ were predictors of repair failure. Old age (≥70 years), NYHA functional class IV and pulmonary artery systolic pressure (≥40 mmHg) were predictors of poor survival by univariate analysis.

Conclusion

Long-term outcomes of repair for degenerative MV disease with the Classic and Physio rings are comparable. We also reiterate the importance of large size annuloplasty rings for Barlow's disease to avoid the incidence left ventricular outflow obstruction.

Injectable Shear-Thinning Hydrogels Prevent Ischemic Mitral Regurgitation and Normalize Ventricular Flow Dynamics

Injectable hydrogels are known to attenuate left-ventricular (LV) remodeling following myocardial infarction (MI), dependent on material mechanical properties. The effect of hydrogel injection on ischemic mitral regurgitation (IMR) resultant from LV remodeling remains relatively unexplored. This study uses multiple imaging methods to evaluate the efficacy of injectable hydrogels with tunable modulus to prevent post-MI development of IMR. Posterolateral MI was induced in 20 sheep with subsequent epicardial injection of saline (control (MI); n = 7), soft hydrogel (guest-host crosslinking, modulus <1 kPa, n = 7), or stiff hydrogel (dual-crosslinking, modulus = 41.4 ± 4.3 kPa, n = 6) within the infarct region and 8-week follow-up. IMR and valve geometry were assessed by echocardiography. LV geometry (long-axis dimension, posterior chordae length) and ventricular flow dynamics were assessed by magnetic resonance imaging. IMR developed in MI controls at 8 weeks and was attenuated with hydrogel treatment (IMR grade for MI: 1.86 ± 0.69; guest-host crosslinking: 1.29 ± 1.11; dual-crosslinking: 0.50 ± 0.55, P = 0.02 vs MI). Tethering of the posterior leaflet increased in MI controls, but not with stiff hydrogel treatment. Across cohorts, IMR was correlated with changes in the long-axis dimension (Spearman R = 0.77) and posterior chordae length (Spearman R = 0.64). Intraventricular flow dynamics were highly disturbed in MI controls, but stiff hydrogel treatment normalized flow patterns and reduced the prevalence of large (≥2+ MR, >5 mL) regurgitant volumes. Injectable hydrogels attenuated subvalvular remodeling and leaflet tethering, preventing IMR development and normalizing LV flow dynamics. Hydrogels with a supraphysiological modulus yielded best outcomes.

A comprehensive pipeline for multi-resolution modeling of the mitral valve: Validation, computational efficiency, and predictive capability

Multiple studies have demonstrated that the pathological geometries unique to each patient can affect the durability of mitral valve (MV) repairs. While computational modeling of the MV is a promising approach to improve the surgical outcomes, the complex MV geometry precludes use of simplified models. Moreover, the lack of complete in vivo geometric information presents significant challenges in the development of patient-specific computational models. There is thus a need to determine the level of detail necessary for predictive MV models. To address this issue, we have developed a novel pipeline for building attribute-rich computational models of MV with varying fidelity directly from the in vitro imaging data. The approach combines high-resolution geometric information from loaded and unloaded states to achieve a high level of anatomic detail, followed by mapping and parametric embedding of tissue attributes to build a high-resolution, attribute-rich computational models. Subsequent lower resolution models were then developed and evaluated by comparing the displacements and surface strains to those extracted from the imaging data. We then identified the critical levels of fidelity for building predictive MV models in the dilated and repaired states. We demonstrated that a model with a feature size of about 5 mm and mesh size of about 1 mm was sufficient to predict the overall MV shape, stress, and strain distributions with high accuracy. However, we also noted that more detailed models were found to be needed to simulate microstructural events. We conclude that the developed pipeline enables sufficiently complex models for biomechanical simulations of MV in normal, dilated, repaired states.

What Does 3D Echocardiography Add to 2D Echocardiography in the Assessment of Mitral Regurgitation?

PURPOSE OF REVIEW

The purpose of this review was to elucidate the additional value of 3D echocardiography for the assessment of mitral regurgitation (MR) compared to standard 2D echocardiography.

RECENT FINDINGS

3D echocardiography provides key information, aetiology, degenerative mitral valve disease vs. secondary MR, causes and mechanism, severity by measurements of effective regurgitant orifice area and regurgitant volume; likelihood of reparability and assessment of pre- and intra-mitral valve transcatheter procedures. 3D echocardiography as a promising method for assessment of MR is useful and crucial for research, clinical practice and patient management in all heart valve team members.

Three-Dimensional Mitral Valve Morphology and Age-Related Trends in Children and Young Adults with Structurally Normal Hearts Using Transthoracic Echocardiography

BACKGROUND

The mitral valve has a complex three-dimensional (3D) morphology that is incompletely described by two-dimensional echocardiography (echo). Three-dimensional echo provides a more robust tool to analyze the mitral valve. The shape of the mitral annulus and leaflets, and differences with age, have not been described by 3D echo in normal children. Our objective was to characterize and quantify the 3D mitral valve morphology in children with normal transthoracic echocardiograms over a broad spectrum of age and to identify differences in valve shape with age.

METHODS

Three-dimensional midsystolic mitral valve models were constructed in 100 children and young adults with normal echocardiograms using 3D transthoracic images. Annular and leaflet metrics were quantified and regression equations were prepared. Interuser and intrauser variability was measured.

RESULTS

Two hundred fifty patients, from neonate to young adult, were retrospectively reviewed to obtain 100 evaluable patients (40% evaluable). The annular height to commissural width ratio of the mitral valve ("saddle shape") was preserved across age (median 24.3, IQR 21.8-28.1). Three-dimensional mitral valve area, length, and volume parameters were linearly related to body surface area (P < .001). The ratio of anterior to posterior leaflet length and posterior leaflet angle increased with body surface area (P = .0004 and .002, respectively) suggesting posterior movement of the coaptation line. Two-dimensional lateral annular diameter underestimated 3D lateral annular metrics (P < .001, mean difference 20-22%) but was highly correlated (R > 0.87, P < .001). Interuser and intrauser variability were acceptable.

CONCLUSIONS

Assessment of 3D mitral valve morphology in children is possible in a modern clinical pediatric echocardiography laboratory using transthoracic images, although further optimization of imaging is needed. The saddle shape of the mitral annulus was preserved across age and size. Most mitral valve parameters increased linearly with patient size. Further investigation is warranted to explore changes in valve morphology in the pediatric population in health and with disease.

Ex Vivo Methods for Informing Computational Models of the Mitral Valve

Computational modeling of the mitral valve (MV) has potential applications for determining optimal MV repair techniques and risk of recurrent mitral regurgitation. Two key concerns for informing these models are (1) sensitivity of model performance to the accuracy of the input geometry, and, (2) acquisition of comprehensive data sets against which the simulation can be validated across clinically relevant geometries. Addressing the first concern, ex vivo micro-computed tomography (microCT) was used to image MVs at high resolution (~40 micron voxel size). Because MVs distorted substantially during static imaging, glutaraldehyde fixation was used prior to microCT. After fixation, MV leaflet distortions were significantly smaller (p < 0.005), and detail of the chordal tree was appreciably greater. Addressing the second concern, a left heart simulator was designed to reproduce MV geometric perturbations seen in vivo in functional mitral regurgitation and after subsequent repair, and maintain compatibility with microCT. By permuting individual excised ovine MVs (n = 5) through each state (healthy, diseased and repaired), and imaging with microCT in each state, a comprehensive data set was produced. Using this data set, work is ongoing to construct and validate high-fidelity MV biomechanical models. These models will seek to link MV function across clinically relevant states.

Transapical Coaptation Plate for Functional Mitral Regurgitation: An In Vitro Study

A novel transapical coaptation plate (TCP) device was developed and anchored by sutures in the mitral valve to treat functional mitral regurgitation. The objective of this study was to test efficacy of the TCP in an in vitro model. Eight fresh porcine mitral valves were mounted in a left heart simulator to simulate functional mitral regurgitation by means of annular dilatation and asymmetrical or symmetrical papillary muscle (PM) displacement. Six polyurethane TCPs in thickness of 6.4(#1), 4.8(#2), 3.2(#3) mm and hardness of durometer 30 A (H) and 30 OO(S),were fabricated and labeled as H1, H2, H3 and S1, S2, S3, respectively. These TCPs were anchored by the sutures in the mitral annulus and left ventricle apex, and tested. Steady backward flow leakage in a hydrostatic condition and regurgitant volume in a pulsatile flow were measured before and after implantation of the TCPs. Mean regurgitant volume fractions in the asymmetric PM displacement were reduced significantly from 59.1 to 37.2% for H1, 43.2% for H2, 35.9% for S1 and 34.2% for S2 (p < 0.021), after implantation of the TCPs. No significant reduction in mitral regurgitation was seen for H3 and S3 (p > 0.067). Mitral regurgitation was mild in the symmetric PM displacement, and was not significantly reduced after implantation of the TCPs. In conclusion, the TCP anchored by the sutures in the mitral annulus and left ventricle apex functions successfully as a plug in the mitral valve leaflet gap. The TCP with thickness equal to or greater than 4.8 mm is effective to reduce functional mitral regurgitation. The TCP hardness has no effect on difference in reduction of functional mitral regurgitation.

Chronic ischemic mitral regurgitation and papillary muscle infarction detected by late gadolinium-enhanced cardiac magnetic resonance imaging in patients with ST-segment elevation myocardial infarction

BACKGROUND

Both papillary muscle infarction (PMI) and chronic ischemic mitral regurgitation (CIMR) are associated with reduced survival after myocardial infarction. The influence of PMI on CIMR and factors influencing both entities are incompletely understood.

OBJECTIVES

We sought to determine the influence of PMI on CIMR after primary percutaneous coronary intervention (PCI) for ST-segment elevation myocardial infarction (STEMI) and to define independent predictors of PMI and CIMR.

METHODS

Between January 2011 and May 2013, 263 patients (mean age 57.8 ± 11.5 years) underwent late gadolinium-enhanced cardiac magnetic resonance imaging and transthoracic echocardiography 4 months after PCI for STEMI. Infarct size, PMI, and mitral valve and left ventricular geometric and functional parameters were assessed. Univariate and multivariate analyses were performed to identify predictors of PMI and CIMR (≥grade 2+).

RESULTS

PMI was present in 61 patients (23 %) and CIMR was present in 86 patients (33 %). In patients with PMI, 52 % had CIMR, and in patients without PMI, 27 % had CIMR (P < 0.001). In multivariate analyses, infarct size [odds ratio (OR) 1.09 (95 % confidence interval 1.04-1.13), P < 0.001], inferior MI [OR 4.64 (1.04-20.62), P = 0.044], and circumflex infarct-related artery [OR 8.21 (3.80-17.74), P < 0.001] were independent predictors of PMI. Age [OR 1.08 (1.04-1.11), P < 0.001], infarct size [OR 1.09 (1.03-1.16), P = 0.003], tethering height [OR 19.30 (3.28-113.61), P = 0.001], and interpapillary muscle distance [OR 3.32 (1.31-8.42), P = 0.011] were independent predictors of CIMR.

CONCLUSIONS

The risk of PMI is mainly associated with inferior infarction and infarction in the circumflex coronary artery. Although the prevalence of CIMR is almost doubled in the presence of PMI, PMI is not an independent predictor of CIMR. Tethering height and interpapillary muscle distance are the strongest independent predictors of CIMR.

Preoperative Three-Dimensional Valve Analysis Predicts Recurrent Ischemic Mitral Regurgitation After Mitral Annuloplasty

BACKGROUND

Valve repair for ischemic mitral regurgitation (IMR) with undersized annuloplasty rings is characterized by high IMR recurrence rates. Patient-specific preoperative imaging-based risk stratification for recurrent IMR would optimize results. We sought to determine if prerepair three-dimensional (3D) echocardiography combined with a novel valve-modeling algorithm would be predictive of IMR recurrence 6 months after repair.

METHODS

Intraoperative transesophageal real-time 3D echocardiography was performed in 50 patients undergoing undersized ring annuloplasty for IMR and in 21 patients with normal mitral valves. A customized image analysis protocol was used to assess 3D annular geometry and regional leaflet tethering. IMR recurrence (≥ grade 2) was assessed with two-dimensional transthoracic echocardiography 6 months after repair.

RESULTS

Preoperative annular geometry was similar in all IMR patients, and preoperative leaflet tethering was significantly higher in patients with recurrent IMR (n=13) than in patients in whom IMR did not recur (n=37) (tethering index: 3.91 ± 1.01 vs 2.90 ± 1.17, p = 0.008; tethering angles of A3: 23.5° ± 8.9° vs 14.4° ± 11.4°, p = 0.012; P2: 44.4° ± 8.8° vs 28.2° ± 17.0°, p = 0.002; and P3: 35.2° ± 6.0° vs. 18.6° ± 12.7°, p < 0.001). Multivariate logistic regression analysis revealed the preoperative P3 tethering angle as an independent predictor of IMR recurrence with an optimal cutoff value of 29.9° (area under the curve, 0.92; 95% confidence interval, 0.84 to 1.00; p < 0.001).

CONCLUSIONS

3D echocardiography combined with valve modeling is predictive of recurrent IMR. Preoperative regional leaflet tethering of segment P3 is a strong independent predictor of IMR recurrence after undersized ring annuloplasty. In patients with a preoperative P3 tethering angle of 29.9° or larger, chordal-sparing valve replacement rather than valve repair should be strongly considered.

Medially constrained deformable modeling for segmentation of branching medial structures: Application to aortic valve segmentation and morphometry

Deformable modeling with medial axis representation is a useful means of segmenting and parametrically describing the shape of anatomical structures in medical images. Continuous medial representation (cm-rep) is a "skeleton-first" approach to deformable medial modeling that explicitly parameterizes an object's medial axis and derives the object's boundary algorithmically. Although cm-rep has effectively been used to segment and model a number of anatomical structures with non-branching medial topologies, the framework is challenging to apply to objects with branching medial geometries since branch curves in the medial axis are difficult to parameterize. In this work, we demonstrate the first clinical application of a new "boundary-first" deformable medial modeling paradigm, wherein an object's boundary is explicitly described and constraints are imposed on boundary geometry to preserve the branching configuration of the medial axis during model deformation. This "boundary-first" framework is leveraged to segment and morphologically analyze the aortic valve apparatus in 3D echocardiographic images. Relative to manual tracing, segmentation with deformable medial modeling achieves a mean boundary error of 0.41 ± 0.10 mm (approximately one voxel) in 22 3DE images of normal aortic valves at systole. Deformable medial modeling is additionally demonstrated on pathological cases, including aortic stenosis, Marfan syndrome, and bicuspid aortic valve disease. This study demonstrates a promising approach for quantitative 3DE analysis of aortic valve morphology.

A novel coaptation plate device for functional mitral regurgitation: an in vitro study

A novel mitral valve repair device, coaptation plate (CP), was proposed to treat functional mitral regurgitation. The objective of this study was to test efficacy of the CP in an in vitro model of functional mitral regurgitation. Ten fresh porcine mitral valves were mounted in a left heart simulator, Mitral regurgitation was emulated by means of annular dilatation, and the asymmetrical or symmetrical papillary muscles (PM) displacement. A rigid and an elastic CPs were fabricated and mounted in the orifice of regurgitant mitral valves. Steady flow leakage in a hydrostatic condition and regurgitant volume in a pulsatile flow were measured before and after implantation of the CPs. The rigid and elastic CPs reduced mitral valve regurgitant volume fraction from 60.5 ± 11.4 to 35 ± 11.6 and 36.5 ± 9.9%, respectively, in the asymmetric PM displacement. Mitral regurgitation was much lower in the symmetric PM displacement than in the asymmetric PM displacement, and was not significantly reduced after implantation of either CP. In conclusion, both the rigid and elastic CPs are effective and have no difference in reduction of functional mitral regurgitation. The CP does not aggravate mitral valve coaptation and may be used as a preventive way.

Semi-automated segmentation and quantification of mitral annulus and leaflets from transesophageal 3-D echocardiographic images

Quantification of three-dimensional (3-D) morphology of the mitral valve (MV) using real-time 3-D transesophageal echocardiography (RT3-D TEE) has proved to be a valuable tool for the assessment of MV pathologies, but of limited use in clinical practice because it relies on user-intensive approaches. This study presents a new algorithm for the segmentation and morphologic quantification of the mitral annulus (MA) and mitral leaflets (ML) in closed valve configuration from RT3-D TEE volumes. Following initialization, the MA and the ML and the coaptation line (CL) are automatically obtained in 3-D. Validation with manual tracings was performed on 33 patients, resulting in segmentation errors in the order of 0.7 mm and 0.6 mm for the MA and ML segmentation, in addition to good intra- and inter-observer reproducibility (coefficients of variation below 12% and 15%, respectively). The ability of the algorithm to assess different MV pathologies as well as repaired valves with implanted annular rings was also explored. The reported performance of the proposed fast, semi-automated MA and ML quantification makes it promising for future applications in clinical settings such as the operating room, where obtaining results in short time is important.

Four-dimensional modelling of the mitral valve by real-time 3D transoesophageal echocardiography: proof of concept

OBJECTIVES

The complexity of the mitral valve (MV) anatomy and function is not yet fully understood. Assessing the dynamic movement and interaction of MV components to define MV physiology during the complete cardiac cycle remains a challenge. We herein describe a novel semi-automated 4D MV model.

METHODS

The model applies quantitative analysis of the MV over a complete cardiac cycle based on real-time 3D transoesophageal echocardiography (RT3DE) data. RT3DE data of MVs were acquired for 18 patients. The MV annulus and leaflets were semi-automatically reconstructed. Dimensions of the mitral annulus (anteroposterior and anterolateral-posteromedial diameter, annular circumference, annular area) and leaflets (MV orifice area, intercommissural distance) were acquired. Variability and reproducibility (intraclass correlation coefficient, ICC) for interobserver and intraobserver comparison were quantified at 4 time points during the cardiac cycle (mid-systole, end-systole, mid-diastole and end-diastole).

RESULTS

Mitral annular dimensions provided highly reliable and reproducible measurements throughout the cardiac cycle for interobserver (variability range, 0.5-1.5%; ICC range, 0.895-0.987) and intraobserver (variability range, 0.5-1.6%; ICC range, 0.827-0.980) comparison, respectively. MV leaflet parameters showed a high reliability in the diastolic phase (variability range, 0.6-9.1%; ICC range, 0.750-0.986), whereas MV leaflet dimensions showed a high variability and lower correlation in the systolic phase (variability range, 0.6-22.4%; ICC range, 0.446-0.915) compared with the diastolic phase.

CONCLUSIONS

This 4D model provides detailed morphological reconstruction as well as sophisticated quantification of the complex MV structure and dynamics throughout the cardiac cycle with a precision not yet described.

Emerging trends in heart valve engineering: Part III. Novel technologies for mitral valve repair and replacement

In this portion of an extensive review of heart valve engineering, we focus on the current and emerging technologies and techniques to repair or replace the mitral valve. We begin with a discussion of the currently available mechanical and bioprosthetic mitral valves followed by the rationale and limitations of current surgical mitral annuloplasty methods; a discussion of the technique of neo-chordae fabrication and implantation; a review the procedures and clinical results for catheter-based mitral leaflet repair; a highlight of the motivation for and limitations of catheter-based annular reduction therapies; and introduce the early generation devices for catheter-based mitral valve replacement.

Three-dimensional ultrasound-derived physical mitral valve modeling

PURPOSE

Advances in mitral valve repair and adoption have been partly attributed to improvements in echocardiographic imaging technology. To educate and guide repair surgery further, we have developed a methodology for fast production of physical models of the valve using novel three-dimensional (3D) echocardiographic imaging software in combination with stereolithographic printing.

DESCRIPTION

Quantitative virtual mitral valve shape models were developed from 3D transesophageal echocardiographic images using software based on semiautomated image segmentation and continuous medial representation algorithms. These quantitative virtual shape models were then used as input to a commercially available stereolithographic printer to generate a physical model of the each valve at end systole and end diastole.

EVALUATION

Physical models of normal and diseased valves (ischemic mitral regurgitation and myxomatous degeneration) were constructed. There was good correspondence between the virtual shape models and physical models.

CONCLUSIONS

It was feasible to create a physical model of mitral valve geometry under normal, ischemic, and myxomatous valve conditions using 3D printing of 3D echocardiographic data. Printed valves have the potential to guide surgical therapy for mitral valve disease.

Quantitative assessment of mitral valve coaptation using three-dimensional transesophageal echocardiography

BACKGROUND

Functional mitral regurgitation (FMR) occurs as a consequence of left ventricular remodeling and is an independent predictor of adverse outcome. FMR is assessed qualitatively with two-dimensional echocardiography, but accurate quantitation of the actual degree of mitral valve (MV) coaptation is not possible with this method. We evaluated a novel three-dimensional (3D) approach to quantify the MV coaptation zone in patients with FMR. We hypothesized that measuring the 3D MV coaptation zone is feasible and would correlate with FMR severity when indexed to MV area.

METHODS

Data were gathered on 25 patients with FMR undergoing cardiac operations, and included a comprehensive two-dimensional and 3D examination with intraoperative transesophageal echocardiography. Using available 3D MV quantification software, offline analysis of end-systolic MV coaptation zone and MV area was performed. A novel MV coaptation index was calculated by the following formula: [3D end-systolic MV coaptation zone/3D MV area]. FMR severity was described as trace, mild, moderate, and severe using the integrative approach recommended by official guidelines.

RESULTS

Analysis of variance demonstrated that the coaptation index was associated with the severity of FMR (F = 20.5, r(2) = 0.75, p < 0.0001). There was also a correlation between 2D vena contracta and the coaptation index (r = -0.74, p < 0.0003).

CONCLUSIONS

We describe a novel 3D approach to direct assessment of the MV coaptation zone. When indexed to the MV area, the 3D MV coaptation zone is closely associated with FMR severity. Assessment of the mitral coaptation may be a potentially powerful tool in the perioperative evaluation of the competency of the MV.

Relocation of papillary muscles for ischemic mitral valve regurgitation: the role of three-dimensional transesophageal echocardiography

OBJECTIVE

The assessment of the mitral valve apparatus (MVA) and its modifications during ischemic mitral regurgitation (IMR) is better performed by three-dimensional (3D) transesophageal echocardiography (TEE). The aim of our study was to carry out nonrestrictive mitral annuloplasty in addition to relocation of papillary muscles (PPMs) oriented by preoperative real-time 3D TEE through the mitral valve quantification dedicated software.

METHODS

Since January 2008, a total of 70 patients with severe IMR were examined both before and after mitral valve repair. The mean (SD) coaptation depth and the mean (SD) tenting area were 1.4 (0.4) cm and 3.2 (0.5) cm2, respectively. Intraoperative 3D TEE was performed, followed by a 3D offline reconstruction of the MVA. A schematic MVA model was obtained, and a geometric model as a "truncated cone" was traced according to preoperative data. The expected truncated cone after annuloplasty was retraced. A conventional normal coaptation depth of approximately 6 mm was used to detect the new position of the PPMs tips.

RESULTS

Perioperative offline reconstruction of the MVA and the respective truncated cone was feasible in all patients. The expected position of the PPMs tips, desirable to reach a normal tenting area with a coaptation depth of 6 mm or more, was obtained in all patients. After surgery, all parameters were calculated, and no statistically significant difference was found compared with the expected data.

CONCLUSIONS

Relocation of PPMs plus ring annuloplasty reduce mitral valve tenting and may improve mitral valve repair results in patients with severe IMR. This technique may be easily and precisely guided by preoperative offline 3D echocardiographic mitral valve reconstruction.

Ischemic mitral regurgitation: mechanisms, intraoperative echocardiographic evaluation, and surgical considerations

Ischemic mitral regurgitation (IMR) is a subcategory of functional rather than organic, mitral valve (MV) disease. Whether reversible or permanent, left ventricular remodeling creates IMR that is complex and multifactorial. A comprehensive TEE examination in patients with IMR may have important implications for perioperative clinical decision making. Several TEE measures predictive of MV repair failure have been identified. Current practice among most surgeons is to typically repair the MV in patients with IMR. MV replacement is usually reserved for situations in which the valve cannot be reasonably repaired, or repair is unlikely to be tolerated clinically.

Fully automatic segmentation of the mitral leaflets in 3D transesophageal echocardiographic images using multi-atlas joint label fusion and deformable medial modeling

Comprehensive visual and quantitative analysis of in vivo human mitral valve morphology is central to the diagnosis and surgical treatment of mitral valve disease. Real-time 3D transesophageal echocardiography (3D TEE) is a practical, highly informative imaging modality for examining the mitral valve in a clinical setting. To facilitate visual and quantitative 3D TEE image analysis, we describe a fully automated method for segmenting the mitral leaflets in 3D TEE image data. The algorithm integrates complementary probabilistic segmentation and shape modeling techniques (multi-atlas joint label fusion and deformable modeling with continuous medial representation) to automatically generate 3D geometric models of the mitral leaflets from 3D TEE image data. These models are unique in that they establish a shape-based coordinate system on the valves of different subjects and represent the leaflets volumetrically, as structures with locally varying thickness. In this work, expert image analysis is the gold standard for evaluating automatic segmentation. Without any user interaction, we demonstrate that the automatic segmentation method accurately captures patient-specific leaflet geometry at both systole and diastole in 3D TEE data acquired from a mixed population of subjects with normal valve morphology and mitral valve disease.

Statistical assessment of normal mitral annular geometry using automated three-dimensional echocardiographic analysis

BACKGROUND

The basis of mitral annuloplasty ring design has progressed from qualitative surgical intuition to experimental and theoretical analysis of annular geometry with quantitative imaging techniques. In this work, we present an automated three-dimensional (3D) echocardiographic image analysis method that can be used to statistically assess variability in normal mitral annular geometry to support advancement in annuloplasty ring design.

METHODS

Three-dimensional patient-specific models of the mitral annulus were automatically generated from 3D echocardiographic images acquired from subjects with normal mitral valve structure and function. Geometric annular measurements including annular circumference, annular height, septolateral diameter, intercommissural width, and the annular height to intercommissural width ratio were automatically calculated. A mean 3D annular contour was computed, and principal component analysis was used to evaluate variability in normal annular shape.

RESULTS

The following mean ± standard deviations were obtained from 3D echocardiographic image analysis: annular circumference, 107.0 ± 14.6 mm; annular height, 7.6 ± 2.8 mm; septolateral diameter, 28.5 ± 3.7 mm; intercommissural width, 33.0 ± 5.3 mm; and annular height to intercommissural width ratio, 22.7% ± 6.9%. Principal component analysis indicated that shape variability was primarily related to overall annular size, with more subtle variation in the skewness and height of the anterior annular peak, independent of annular diameter.

CONCLUSIONS

Patient-specific 3D echocardiographic-based modeling of the human mitral valve enables statistical analysis of physiologically normal mitral annular geometry. The tool can potentially lead to the development of a new generation of annuloplasty rings that restore the diseased mitral valve annulus back to a truly normal geometry.

Isolated effect of geometry on mitral valve function for in silico model development

Computational models for the heart's mitral valve (MV) exhibit several uncertainties that may be reduced by further developing these models using ground-truth data-sets. This study generated a ground-truth data-set by quantifying the effects of isolated mitral annular flattening, symmetric annular dilatation, symmetric papillary muscle (PM) displacement and asymmetric PM displacement on leaflet coaptation, mitral regurgitation (MR) and anterior leaflet strain. MVs were mounted in an in vitro left heart simulator and tested under pulsatile haemodynamics. Mitral leaflet coaptation length, coaptation depth, tenting area, MR volume, MR jet direction and anterior leaflet strain in the radial and circumferential directions were successfully quantified at increasing levels of geometric distortion. From these data, increase in the levels of isolated PM displacement resulted in the greatest mean change in coaptation depth (70% increase), tenting area (150% increase) and radial leaflet strain (37% increase) while annular dilatation resulted in the largest mean change in coaptation length (50% decrease) and regurgitation volume (134% increase). Regurgitant jets were centrally located for symmetric annular dilatation and symmetric PM displacement. Asymmetric PM displacement resulted in asymmetrically directed jets. Peak changes in anterior leaflet strain in the circumferential direction were smaller and exhibited non-significant differences across the tested conditions. When used together, this ground-truth data-set may be used to parametrically evaluate and develop modelling assumptions for both the MV leaflets and subvalvular apparatus. This novel data may improve MV computational models and provide a platform for the development of future surgical planning tools.

Regional annular geometry in patients with mitral regurgitation: implications for annuloplasty ring selection

BACKGROUND

The saddle shape of the normal mitral annulus has been quantitatively described by several groups. There is strong evidence that this shape is important to valve function. A more complete understanding of regional annular geometry in diseased valves may provide a more educated approach to annuloplasty ring selection and design. We hypothesized that mitral annular shape is markedly distorted in patients with diseased valves.

METHODS

Real-time 3-dimensional echocardiography was performed in 20 patients with normal mitral valves, 10 with ischemic mitral regurgitation, and 20 with myxomatous mitral regurgitation (MMR). Thirty-six annular points were defined to generate a 3-dimensional model of the annulus. Regional annular parameters were measured from these renderings. Left ventricular inner diameter was obtained from 2-dimensional echocardiographic images.

RESULTS

Annular geometry was significantly different among the three groups. The annuli were larger in the MMR and in the ischemic mitral regurgitation groups. The annular enlargement was greater and more pervasive in the MMR group. Both diseases were associated with annular flattening, although though the regional distribution of that flattening was different between groups. Left ventricular inner diameter was increased in both groups. However, relative to the Left ventricular inner diameter, the annulus was disproportionately dilated in the MMR group.

CONCLUSIONS

Patients with MMR and ischemic mitral regurgitation have enlarged and flattened annuli. In the case of MMR, annular distortions may be the driving factor leading to valve incompetence. These data suggest that the goal of annuloplasty should be the restoration of normal annular saddle shape and that the use of flexible, partial, and flat rings may be ill advised.

Multi-atlas segmentation with robust label transfer and label fusion

Multi-atlas segmentation has been widely applied in medical image analysis. This technique relies on image registration to transfer segmentation labels from pre-labeled atlases to a novel target image and applies label fusion to reduce errors produced by registration-based label transfer. To improve the performance of registration-based label transfer against registration errors, our first contribution is to propose a label transfer scheme that generates multiple warped versions of each atlas to one target image through registration paths obtained by composing inter-atlas registrations and atlas-target registrations. The problem of decreasing quality of warped atlases caused by accumulative errors in composing multiple registrations is properly addressed by an atlas selection method that is guided by atlas segmentations. To improve the performance of label fusion against registration errors, our second contribution is to integrate the probabilistic correspondence model employed by the non-local mean approach with the joint label fusion technique, both of which have shown excellent performance for label fusion. Experiments on mitral-valve segmentation in 3D transesophageal echocardiography (TEE) show the effectiveness of the proposed techniques.

Toward patient-specific simulations of cardiac valves: state-of-the-art and future directions

Recent computational methods enabling patient-specific simulations of native and prosthetic heart valves are reviewed. Emphasis is placed on two critical components of such methods: (1) anatomically realistic finite element models for simulating the structural dynamics of heart valves; and (2) fluid structure interaction methods for simulating the performance of heart valves in a patient-specific beating left ventricle. It is shown that the significant progress achieved in both fronts paves the way toward clinically relevant computational models that can simulate the performance of a range of heart valves, native and prosthetic, in a patient-specific left heart environment. The significant algorithmic and model validation challenges that need to be tackled in the future to realize this goal are also discussed.

Dynamic 3-dimensional echocardiographic assessment of mitral annular geometry in patients with functional mitral regurgitation

BACKGROUND

Mitral valve (MV) annular dynamics have been well described in animal models of functional mitral regurgitation (FMR). Despite this, little if any data exist regarding the dynamic MV annular geometry in humans with FMR. In the current study we hypothesized that 3-dimensional (3D) echocardiography, in conjunction with commercially available software, could be used to quantify the dynamic changes in MV annular geometry associated with FMR.

METHODS

Intraoperative 3D transesophageal echocardiographic data obtained from 34 patients with FMR and 15 controls undergoing cardiac operations were dynamically analyzed for differences in mitral annular geometry with TomTec 4D MV Assessment 2.0 software (TomTec Imaging Systems GmbH, Munich, Germany).

RESULTS

In patients with FMR, the mean mitral annular area (14.6 cm(2) versus 9.6 cm(2)), circumference (14.1 cm versus 11.4 cm), anteroposterior (4.0 cm versus 3.0 cm) and anterolateral-posteromedial (4.3 cm versus 3.6 cm) diameters, tenting volume (6.2 mm(3) versus 3.5 mm(3)) and nonplanarity angle (NPA) (154 degrees ± 15 versus 136 degrees ± 11) were greater at all points during systole compared with controls (p < 0.01). Vertical mitral annular displacement (5.8 mm versus 8.3 mm) was reduced in FMR compared with controls (p < 0.01).

CONCLUSIONS

There are significant differences in dynamic mitral annular geometry between patients with FMR and those without. We were able to analyze these changes in a clinically feasible fashion. Ready availability of this information has the potential to aid comprehensive quantification of mitral annular function and possibly assist in both clinical decision making and annuloplasty ring selection.

Recurrence of mitral regurgitation after partial versus complete mitral valve ring annuloplasty for functional mitral regurgitation

OBJECTIVES

Both partial and complete annuloplasty rings are used for mitral valve repair for patients with functional mitral regurgitation (FMR). We sought to determine if recurrence of mitral regurgitation (MR) is affected by the type of ring used.

METHODS

Five hundred forty-eight patients diagnosed with FMR underwent mitral valve repair with ring annuloplasty between 1998 and 2008 in our institution. Medical records were reviewed retrospectively for clinical and echocardiographic data to determine the presence of recurrent MR (defined as moderate or severe).

RESULTS

Among 479 patients for whom postoperative echocardiographic data were available, recurrent MR occurred less frequently in the complete versus partial ring group (20 of 209 [10%] vs 56 of 270 [21%] patients; P = .001), despite lower preoperative ejection fractions in the complete ring group (median, 35%; interquartile range, 25%-45% vs median, 40%; interquartile range, 30%-55%; P < .001). Kaplan-Meier analysis demonstrated greater freedom from recurrent MR in the complete ring group (108 vs 103 months; P = .001). Risk-matched propensity analysis of 102 patients per group (area under the curve, 0.824; 95% confidence interval, 0.788-0.861; P < .001) also demonstrated that complete ring recipients had greater freedom from recurrent MR than partial ring recipients by univariate analysis (7 [7%] vs 17 [17%] patients; P = .049), and a trend toward greater freedom by Kaplan-Meier analysis (110 vs 104 months; P = .068).

CONCLUSIONS

The use of complete mitral annuloplasty rings provides improved freedom from recurrent MR in patients with FMR.

Development of a semi-automated method for mitral valve modeling with medial axis representation using 3D ultrasound

PURPOSE

Precise 3D modeling of the mitral valve has the potential to improve our understanding of valve morphology, particularly in the setting of mitral regurgitation (MR). Toward this goal, the authors have developed a user-initialized algorithm for reconstructing valve geometry from transesophageal 3D ultrasound (3D US) image data.

METHODS

Semi-automated image analysis was performed on transesophageal 3D US images obtained from 14 subjects with MR ranging from trace to severe. Image analysis of the mitral valve at midsystole had two stages: user-initialized segmentation and 3D deformable modeling with continuous medial representation (cm-rep). Semi-automated segmentation began with user-identification of valve location in 2D projection images generated from 3D US data. The mitral leaflets were then automatically segmented in 3D using the level set method. Second, a bileaflet deformable medial model was fitted to the binary valve segmentation by Bayesian optimization. The resulting cm-rep provided a visual reconstruction of the mitral valve, from which localized measurements of valve morphology were automatically derived. The features extracted from the fitted cm-rep included annular area, annular circumference, annular height, intercommissural width, septolateral length, total tenting volume, and percent anterior tenting volume. These measurements were compared to those obtained by expert manual tracing. Regurgitant orifice area (ROA) measurements were compared to qualitative assessments of MR severity. The accuracy of valve shape representation with cm-rep was evaluated in terms of the Dice overlap between the fitted cm-rep and its target segmentation.

RESULTS

The morphological features and anatomic ROA derived from semi-automated image analysis were consistent with manual tracing of 3D US image data and with qualitative assessments of MR severity made on clinical radiology. The fitted cm-reps accurately captured valve shape and demonstrated patient-specific differences in valve morphology among subjects with varying degrees of MR severity. Minimal variation in the Dice overlap and morphological measurements was observed when different cm-rep templates were used to initialize model fitting.

CONCLUSIONS

This study demonstrates the use of deformable medial modeling for semi-automated 3D reconstruction of mitral valve geometry using transesophageal 3D US. The proposed algorithm provides a parametric geometrical representation of the mitral leaflets, which can be used to evaluate valve morphology in clinical ultrasound images.

Augmented mitral valve leaflet area decreases leaflet stress: a finite element simulation

BACKGROUND

Using human mitral valve (MV) models derived from three-dimensional echocardiography, finite element analysis was used to predict mechanical leaflet and chordal stress. Subsequently, valve geometries were altered to examine the effects on stresses of the following: (1) varying coaptation area; (2) varying noncoapted leaflet tissue area; and (3) varying interleaflet coefficient of friction (μ).

METHODS

Three human MV models were loaded with a transvalvular pressure of 80 mm Hg using finite element analysis. Initially leaflet coaptation was set to 10%, 50%, or 100% of actual coaptation length to test the influence of coaptation length on stress distribution. Next, leaflet surface areas were augmented by 1% overall and by 2% in the noncoapted "belly" region to test the influence of increased leaflet billowing without changing the gross geometry of the MV. Finally, the coefficient of friction between the coapted leaflets was set to μ = 0, 0.05, or 0.3, to assess the influence of friction on MV function.

RESULTS

Leaflet coaptation length did not affect stress distribution in either the coapted or noncoapted leaflet regions; peak leaflet stress was 0.36 ± 0.17 MPa at 100%, 0.35 ± 0.14 MPa at 50%, and 0.35 ± 0.15 MPa at 10% coaptation lengths (p = 0.85). Similarly, coaptation length did not affect peak chordal tension (p = 0.74). Increasing the noncoapted leaflet area decreased the peak valvular stresses by 5 ± 2% (p = 0.02). Varying the coefficient of friction between leaflets did not alter leaflet or chordal stress distribution (p = 0.18).

CONCLUSIONS

Redundant MV leaflet tissue reduces mechanical stress on the noncoapted leaflets; the extent of coaptation or frictional interleaflet interaction does not independently influence leaflet stresses. Repair techniques that increase or preserve noncoapted leaflet area may decrease mechanical stresses and thereby enhance repair durability.

Advances in 3D echocardiography for mitral valve

The advent of real-time (RT) 3D transesophageal echocardiography (TEE) in 2007 has enhanced our understanding of the location and extent of the pathology of the native, as well as prosthetic, mitral valve (MV), particularly for MV prolapse and the anatomy of perivalvular dehiscence with prosthetic MV. MV quantification programs provide precise assessment of many quantitative MV parameters allowing 3D echocardiography to determine and quantify the geometry of mitral apparatus, including mitral annulus and periannular region, leaflet volume and anatomy, tethering distances, and tenting volumes. The detailed, accurate and optimal RT spatial visualization of the MV with 3D TEE gives greater confidence to the echocardiographer, interventionalist and the surgeon alike, facilitating medical and surgical treatment decisions. This article highlights recent advances in RT 3D TEE and transthoracic echocardiography echocardiographic imaging of the MV.

The influence of saddle-shaped annuloplasty on leaflet curvature in patients with ischaemic mitral regurgitation

OBJECTIVES

Reports indicate that repair procedures for ischaemic mitral regurgitation (IMR) are less durable than previously thought. Repair failure has been shown to be stress related. Leaflet curvature is the major determinant of valve stress. Theoretical and animal experiments have shown that saddle-shaped annuloplasty optimizes leaflet curvature when compared with standard flat ring annuloplasty. Despite this, the influence of the ring shape on leaflet curvature has not been described in patients with IMR. This study uses real-time three-dimensional echocardiography (rt-3DE) to assess the influence of the ring shape on leaflet curvature.

METHODS

Rt-3DE was performed in 21 patients with IMR after placement of either a flat (n = 10, CE-Physio, Edwards) or saddle-shaped (n = 11, Profile 3D, Medtronic) annuloplasty ring. A combination of commercially available and customized software was used to measure multiple leaflet curvature parameters across all regions of the mitral valve.

RESULTS

Independently of the shape of the annuloplasty ring, all patients were subject to the same degree of annular undersizing. Patients who received saddle-shaped annuloplasty rings had greater leaflet curvature in all six mitral valve leaflet regions (A1 = 0.36 ± 0.10, A2 = 0.53 ± 0.13, A3 = 0.47 ± 0.13, P1 = 0.35 ± 0.23, P2 = 0.53 ± 0.34, P3 = 0.42 ± 0.20 cm(-2)) compared with patients who received flat annuloplasty rings (A1 = 0.16 ± 0.11, A2 = 0.18 ± 0.09, A3 = 0.16 ± 0.11, P1 = 0.20 ± 0.17, P2 = 0.21 ± 0.11, P3 = 0.18 ± 0.13 cm(-2)). These differences were statistically significant in all regions except the P1 region.

CONCLUSIONS

Saddle-shaped annuloplasty rings increase leaflet curvature compared with flat rings in patients with IMR. As a result, saddle-shaped annuloplasty may decrease leaflet stress and potentially increases the durability of the repair in patients with IMR.

Mitral valve annuloplasty and papillary muscle relocation oriented by 3-dimensional transesophageal echocardiography for severe functional mitral regurgitation

OBJECTIVE

The study of the mitral valve apparatus and its modifications during functional mitral regurgitation (FMR) is better revealed by 3-dimensional (3D) transesophageal echocardiography (TOE). To plan mitral valve repair by annuloplasty and papillary muscle (PPM) relocation, we proposed a valve repair procedure oriented by the new main features obtained by real-time 3D TOE reconstruction of the mitral valve apparatus.

METHODS

Since January 2008, 25 patients with severe FMR before mitral valve repair were examined. Mean coaptation depth and mean tenting area were 1.3 ± 0.2 cm and 3.2 ± 0.5 cm(2), respectively. Intraoperative 2D and 3D TOE were performed, followed by a 3D offline reconstruction of the mitral valve apparatus. A schematic mitral valve apparatus model was obtained. A geometric model like a truncated cone was traced in according to the preoperative measurements. The size of the prosthetic ring was selected preoperatively according to the anterior leaflet surface. The expected truncated cone after annuloplasty was retraced. A conventional normal coaptation depth about 0.6 cm was used to detect the new position of the PPM tips.

RESULTS

Offline reconstruction of the mitral valve apparatus and respective truncated cone were feasible in all patients. The expected position of the PPM tips desirable to reach a normal tenting area with a coaptation depth 0.6 cm or less was obtained in all patients. After surgery, all parameters were calculated and no statistically significant difference was found compared with the expected data.

CONCLUSIONS

PPM relocation plus ring annuloplasty reduce mitral valve tenting and may improve mitral valve repair results for patients with severe FMR. This technique may be easily and precisely guided by preoperative offline 3D echocardiographic mitral valve reconstruction.

Semi-automated mitral valve morphometry and computational stress analysis using 3D ultrasound

In vivo human mitral valves (MV) were imaged using real-time 3D transesophageal echocardiography (rt-3DTEE), and volumetric images of the MV at mid-systole were analyzed by user-initialized segmentation and 3D deformable modeling with continuous medial representation, a compact representation of shape. The resulting MV models were loaded with physiologic pressures using finite element analysis (FEA). We present the regional leaflet stress distributions predicted in normal and diseased (regurgitant) MVs. Rt-3DTEE, semi-automated leaflet segmentation, 3D deformable modeling, and FEA modeling of the in vivo human MV is tenable and useful for evaluation of MV pathology.