Synthesis and toxicity characterization of carbon coated iron oxide nanoparticles with highly defined size distributions

Improving the Theranostic Potential of Magnetic Nanoparticles by Coating with Natural Rubber Latex for Ultrasound, Photoacoustic Imaging, and Magnetic Hyperthermia: An In Vitro Study

BACKGROUND/OBJECTIVES

Magnetic nanoparticles (MNPs) have gained attention in theranostics for their ability to combine diagnostic imaging and therapeutic capabilities in a single platform, enhancing targeted treatment and monitoring. Surface coatings are essential for stabilizing MNPs, improving biocompatibility, and preventing oxidation that could compromise their functionality. Natural rubber latex (NRL) offers a promising coating alternative due to its biocompatibility and stability-enhancing properties. While NRL-coated MNPs have shown potential in applications such as magnetic resonance imaging, their effectiveness in theranostics, particularly magnetic hyperthermia (MH) and photoacoustic imaging (PAI), remains underexplored.

METHODS

In this study, iron oxide nanoparticles were synthesized via coprecipitation, using NRL as the coating agent. The samples were labeled by NRL amount used during synthesis: NRL-100 for 100 μL and NRL-400 for 400 μL.

RESULTS

Characterization results showed that NRL-100 and NRL-400 samples exhibited improved stability with zeta potentials of -27 mV and -30 mV, respectively and higher saturation magnetization values of 79 emu/g and 88 emu/g of Fe3O4. Building on these findings, we evaluated the performance of these nanoparticles in biomedical applications, including magnetomotive ultrasound (MMUS), PAI, and MH. NRL-100 and NRL-400 samples showed greater displacements and higher contrast in MMUS than uncoated samples (5, 8, and 9 µm) at 0.5 wt%. In addition, NRL-coated samples demonstrated an improved signal-to-noise ratio (SNR) in PAI. SNR values were 24.72 (0.51), 31.44 (0.44), and 33.81 (0.46) dB for the phantoms containing uncoated MNPs, NRL-100, and NRL-400, respectively. Calorimetric measurements for MH confirmed the potential of NRL-coated MNPs as efficient heat-generating agents, showing values of 43 and 40 W/g for NRL-100 and NRL-400, respectively.

CONCLUSIONS

Overall, NRL-coated MNPs showed great promise as contrast agents in MMUS and PAI imaging, as well as in MH applications.

What function of nanoparticles is the primary factor for their hyper-toxicity?

Nanomaterials have applications in environmental protection, hygiene, medicine, agriculture, and the food industry due to their enhanced bio-efficacy/toxicity as science and technology have progressed, notably nanotechnology. The extension in the use of nanoparticles in day-to-day products and their excellent efficacy raises worries about safety concerns associated with their use. Therefore, to understand their safety concerns and find the remedy, it is imperative to understand the rationales for their enhanced toxicity at low concentrations to minimize their potential side effects. The worldwide literature quotes different nanoparticle functions responsible for their enhanced bio-efficacy/ toxicity. Since the literature on the comparative toxicity study of nanoparticles of different shapes and sizes having different other physic-chemical properties like surface areas, surface charge, solubility, etc., evident that the nanoparticle's toxicity is not followed the fashion according to their shape, size, surface area, surface charge, solubility, and other Physico-chemical properties. It raises the question then what function of nanoparticle is the primary factor for their hyper toxicity. Why do non-spherical and large-sized nanoparticles show the same or higher toxicity to the same or different cell line or test organism instead of having lower surface area, surface charge, larger size, etc., than their corresponding spherical and smaller-sized nanoparticles? Are these factors a secondary, not primary, factor for nanoparticles hyper-toxicity? If so, what function of nanoparticles is the primary function for their hyper-toxicity? Therefore, in this article, literature related to the comparative toxicity of nanoparticles was thoroughly studied, and a hypothesis is put forth to address the aforesaid question, that the number of atoms/ions/ molecules per nanoparticles is the primary function of nanoparticles toxicity.

The Therapeutic Potential of Chemo/Thermotherapy with Magnetoliposomes for Cancer Treatment

Cancer represents a very grave and quickly growing public health problem worldwide. Despite the breakthroughs in treatment and early detection of the disease, an increase is projected in the incidence rate and mortality during the next 30 years. Thus, it is important to develop new treatment strategies and diagnostic tools. One alternative is magnetic hyperthermia, a therapeutic approach that has shown promising results, both as monotherapy and in combination with chemo- and radiotherapy. However, there are still certain limitations and questions with respect to the safety of the systemic administration of magnetic nanoparticles. To deal with these issues, magnetoliposomes were conceived as a new generation of liposomes that incorporate superparamagnetic nanoparticles and oncological pharmaceuticals within their structure. They have the advantage of targeted and selective drug delivery to the diseased organs and tissues. Some of them can avoid the immune response of the host. When exposed to a magnetic field of alternating current, magnetoliposomes produce hyperthermia, which acts synergistically with the released drug. The aim of the present review is to describe the most recent advances in the use of magnetoliposomes and point out what research remains to be done for their application to chemo-thermal therapy in cancer patients.

Superparamagnetic Fe/Au Nanoparticles and Their Feasibility for Magnetic Hyperthermia

Today, magnetic hyperthermia constitutes a complementary way to cancer treatment. This article reports a promising aspect of magnetic hyperthermia addressing superparamagnetic and highly Fe/Au core-shell nanoparticles. Those nanoparticles were prepared using a wet chemical approach at room temperature. We found that the as-synthesized core shells assembled with spherical morphology, including face-centered-cubic Fe cores coated and Au shells. The high-resolution transmission microscope images (HRTEM) revealed the formation of Fe/Au core/shell nanoparticles. The magnetic properties of the samples showed hysteresis loops with coercivity (HC) close to zero, revealing superparamagnetic-like behavior at room temperature. The saturation magnetization (MS) has the value of 165 emu/g for the as-synthesized sample with a Fe:Au ratio of 2:1. We also studied the feasibility of those core-shell particles for magnetic hyperthermia using different frequencies and different applied alternating magnetic fields. The Fe/Au core-shell nanoparticles achieved a specific absorption rate of 50 W/g under applied alternating magnetic field with amplitude 400 Oe and 304 kHz frequency. Based on our findings, the samples can be used as a promising candidate for magnetic hyperthermia for cancer therapy.

Atomic-scale investigation of the effect of surface carbon coatings on the oxidation and mechanical properties of iron nanowires

The understanding of the complex atomistic-scale mechanisms of the oxidation process of carbon (C) coated iron nanowires (Fe NW) and also the resulting modulation of mechanical properties is a highly challenging task.

Magnetite (Fe3O4) Nanoparticles in Biomedical Application: From Synthesis to Surface Functionalisation

Nanotechnology has gained much attention for its potential application in medical science. Iron oxide nanoparticles have demonstrated a promising effect in various biomedical applications. In particular, magnetite (Fe3O4) nanoparticles are widely applied due to their biocompatibility, high magnetic susceptibility, chemical stability, innocuousness, high saturation magnetisation, and inexpensiveness. Magnetite (Fe3O4) exhibits superparamagnetism as its size shrinks in the single-domain region to around 20 nm, which is an essential property for use in biomedical applications. In this review, the application of magnetite nanoparticles (MNPs) in the biomedical field based on different synthesis approaches and various surface functionalisation materials was discussed. Firstly, a brief introduction on the MNP properties, such as physical, thermal, magnetic, and optical properties, is provided. Considering that the surface chemistry of MNPs plays an important role in the practical implementation of in vitro and in vivo applications, this review then focuses on several predominant synthesis methods and variations in the synthesis parameters of MNPs. The encapsulation of MNPs with organic and inorganic materials is also discussed. Finally, the most common in vivo and in vitro applications in the biomedical world are elucidated. This review aims to deliver concise information to new researchers in this field, guide them in selecting appropriate synthesis techniques for MNPs, and to enhance the surface chemistry of MNPs for their interests.

Structural and physicochemical properties of Rheum emodi mediated Mg(OH)2 nanoparticles and their antibacterial and cytotoxic potential

In the present investigation, Rheum emodi roots extract mediated magnesium hydroxide nanoparticles [Mg(OH)2 NPs] through the bio-inspired experimental technique were synthesised. Mg(OH)2 NPs were characterised by using various characterisation techniques such as field emission scanning electron microscopy, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and ultraviolet-visible spectroscopy. The formation of Mg(OH)2 NPs was confirmed by X-ray diffraction. The structural analysis confirmed the hexagonal crystal symmetry of Mg(OH)2 NPs with space group P-3m1 and space group no. 164 using the Rietveld refinement technique. TEM micrographs illustrated the nano-size formation of Mg(OH)2 NPs of spherical shape and size ∼14.86 nm. With the aid of FTIR data, plant metabolites such as anthraquinones have been identified as a stabilising and reducing agent for the synthesis of biogenic Mg(OH)2 NPs. The synthesised Mg(OH)2 NPs showed antimicrobial and cytotoxic potential against Gram-negative and Gram-positive bacteria such as Escherichia coli (ATCC 25922) and Staphylococcus aureus (ATCC 25923) and MDA-MB-231 human breast cancer cell lines.

Chemically synthesized nanoparticles of iron and iron-carbides

In this paper, we report a one-pot chemical synthesis technique for the preparation of iron and iron-carbide nanoparticles. Mössbauer spectroscopy, X-ray diffraction and magnetometry were used as the main tools to identify the different phases of Fe-C present. The influence of experimental parameters on the structural and compositional properties of nanoparticles was investigated in detail. These particles show ferromagnetic behavior with room temperature coercivity higher than 300 Oe. The X-ray diffraction was complemented by Mössbauer spectroscopy and thermo-magnetic analysis. Remarkably, the carbon content in iron-carbide nanoparticles (carbon rich or carbon poor iron-carbides) can be modulated simply by varying the experimental conditions, like the reaction time, temperature and iron precursor concentration. Magnetic properties can be tailored based upon crystallographic structure and particles composition.

Carbon-Coated Superparamagnetic Nanoflowers for Biosensors Based on Lateral Flow Immunoassays

Superparamagnetic iron oxide nanoflowers coated by a black carbon layer (Fe3O4@C) were studied as labels in lateral flow immunoassays. They were synthesized by a one-pot solvothermal route, and they were characterized (size, morphology, chemical composition, and magnetic properties). They consist of several superparamagnetic cores embedded in a carbon coating holding carboxylic groups adequate for bioconjugation. Their multi-core structure is especially efficient for magnetic separation while keeping suitable magnetic properties and appropriate size for immunoassay reporters. Their functionality was tested with a model system based on the biotin-neutravidin interaction. For this, the nanoparticles were conjugated to neutravidin using the carbodiimide chemistry, and the lateral flow immunoassay was carried out with a biotin test line. Quantification was achieved with both an inductive magnetic sensor and a reflectance reader. In order to further investigate the quantifying capacity of the Fe3O4@C nanoflowers, the magnetic lateral flow immunoassay was tested as a detection system for extracellular vesicles (EVs), a novel source of biomarkers with interest for liquid biopsy. A clear correlation between the extracellular vesicle concentration and the signal proved the potential of the nanoflowers as quantifying labels. The limit of detection in a rapid test for EVs was lower than the values reported before for other magnetic nanoparticle labels in the working range 0-3 × 107 EVs/μL. The method showed a reproducibility (RSD) of 3% (n = 3). The lateral flow immunoassay (LFIA) rapid test developed in this work yielded to satisfactory results for EVs quantification by using a precipitation kit and also directly in plasma samples. Besides, these Fe3O4@C nanoparticles are easy to concentrate by means of a magnet, and this feature makes them promising candidates to further reduce the limit of detection.

Surface Modification of Magnetic Nanoparticles by Carbon-Coating Can Increase Its Biosafety: Evidences from Biochemical and Neurobehavioral Tests in Zebrafish

Recently, magnetic nanoparticles (MNPs) have gained much attention in the field of biomedical engineering for therapeutic as well as diagnostic purposes. Carbon magnetic nanoparticles (C-MNPs) are a class of MNPs categorized as organic nanoparticles. C-MNPs have been under considerable interest in studying in various applications such as magnetic resonance imaging, photothermal therapy, and intracellular transportof drugs. Research work is still largely in progress for testing the efficacy of C-MNPs on the theranostics platform in cellular studies and animal models. In this study, we evaluated the neurobehavioral toxicity parameters on the adult zebrafish (Danio rerio) at either low (1 ppm) or high (10 ppm) concentration level of C-MNPs over a period of two weeks by waterborne exposure. The physical properties of the synthesized C-MNPs were characterized by transmission electron microscopy, Raman, and XRD spectrum characterization. Multiple behavior tests for the novel tank, mirror biting, predator avoidance, conspecific social interaction, shoaling, and analysis of biochemical markers were also conducted to elucidate the corresponding mechanism. Our data demonstrate the waterborne exposure of C-MNPs is less toxic than the uncoated MNPs since neither low nor high concentration C-MNPs elicit toxicity response in behavioral and biochemical tests in adult zebrafish. The approach combining biochemical and neurobehavioral approaches would be helpful for understanding C-MNPs association affecting the bioavailability, biosafety, interaction, and uptake of these C-MNPs in the living organism.

Introduction of magnetic and supermagnetic nanoparticles in new approach of targeting drug delivery and cancer therapy application

In this article, the recent applications of different types of magnetic nanoparticles such as α-Fe₂O₃ (hematite), γ-Fe₂O₃ (maghemite), Fe₃O₄ (magnetite), hexagonal (MFe₁₂O₁₉), garnet (M₃Fe₅O₁₂) and spinel (MFe₂O₄), where M represents one or more bivalent transition metals (Mn, Fe, Co, Ni, Ba, Sr, Cu, and Zn), and different materials for coating the surface of magnetic nanoparticles like poly lactic acid (PLA), doxorubicin hydrophobic (DOX-HCL), paclitaxel (PTX), EPPT-FITC, oleic acid, tannin, 3-Aminopropyltriethoxysilane (APTES), multi-wall carbon nanotubes (CNTs), polyethylenimine (PEI) and polyarabic acid in drug delivery, biomedicine and treatment of cancer, specially chemotherapy, are reviewed. MNPs possess large surface area to volume ratios because of their nano-size, low surface charge at physiological pH and they aggregate easily in solution due to their essential magnetic nature. These materials are widely used in biology and medicine in many cases. One targeted delivery technique that has gained prominence in recent years is the use of magnetic nanoparticles. In these systems, therapeutic compounds are attached to biocompatible magnetic nanoparticles and magnetic fields generated outside the body are focused on specific targets in vivo. The fields capture the particle complex, resulting in enhanced delivery to the target site. Also, the application of brand new supermagnetic nanoparticles, like Ba,SrFe₁₂O₁₉, is considered and studied in this paper.

Endoplasmic reticulum stress mediates inflammatory response triggered by ultra-small superparamagnetic iron oxide nanoparticles in hepatocytes

Ultra-small superparamagnetic iron oxide nanoparticles (USPIO-NPs) are widely used as clinical magnetic resonance imaging contrast agents for hepatic diseases diagnosis. USPIO-NPs often damage the hepatocytes and affect the function of liver but its mechanism of action remains unclear. In the present study, USPIO-NPs caused higher cytotoxicity and lactate dehydrogenase (LDH) leakage in hepatic L02 cells than SPIO-NPs. Subsequently, USPIO-NPs affected more genes' expression than SPIO-NPs analyzed through microarray and bioinformatics analysis. The affected genes were involved in several biological processes, including calcium ion homeostasis, inflammatory response-related leukocyte chemotaxis, and migration. In addition, the level of endoplasmic reticulum (ER) calcium ion was increased by USPIO-NPs. USPIO-NPs also upregulated the genes related to acute-phase inflammation, including IL1B, IL6, IL18, TNFSF12, TNFRSF12, SAA1, SAA2, JAK1, STAT5B, and CXCL14. Furthermore, interleukin-6 (IL-6) secretion was elevated by USPIO-NPs as detected using ELISA. On the other hand, USPIO-NPs changed the morphology of ER and triggered the ER stress and unfolded protein response PERK/ATF4 pathway. Furthermore, blocking ER stress with inhibitor or ATF4 small interfering RNA counteracted IL-6-related acute-phase inflammation and cytotoxicity caused by USPIO-NPs. Taken together, we found that the USPIO-NPs could trigger stronger IL-6-related acute-phase inflammation than SPIO-NPs in hepatocytes. We demonstrated, for the first time, that IL-6-related acute-phase inflammation caused by NPs was regulated by PERK/ATF4 signaling. The PERK/ATF4 pathway explored in this study could be a candidate for diagnostic and therapeutic target against NPs-induced liver injury and cytotoxicity, which would be helpful for USPIO-NPs medical application.

The impact of doped silicon quantum dots on human osteoblasts

Interaction of red/infrared fluorescent (B, P co-doped) Si quantum dots with biological environment (medium and cells) is sensitive to the presence of fetal bovine serum, to the particle size and surface potential and influenced by particle ageing.

In Vitro/In Vivo Toxicity Evaluation and Quantification of Iron Oxide Nanoparticles

Increasing biomedical applications of iron oxide nanoparticles (IONPs) in academic and commercial settings have alarmed the scientific community about the safety and assessment of toxicity profiles of IONPs. The great amount of diversity found in the cytotoxic measurements of IONPs points toward the necessity of careful characterization and quantification of IONPs. The present document discusses the major developments related to in vitro and in vivo toxicity assessment of IONPs and its relationship with the physicochemical parameters of IONPs. Major discussion is included on the current spectrophotometric and imaging based techniques used for quantifying, and studying the clearance and biodistribution of IONPs. Several invasive and non-invasive quantification techniques along with the pitfalls are discussed in detail. Finally, critical guidelines are provided to optimize the design of IONPs to minimize the toxicity.

Monitoring microbial metabolites using an inductively coupled resonance circuit

We present a new approach to monitor microbial population dynamics in emulsion droplets via changes in metabolite composition, using an inductively coupled LC resonance circuit. The signal measured by such resonance detector provides information on the magnetic field interaction with the bacterial culture, which is complementary to the information accessible by other detection means, based on electric field interaction, i.e. capacitive or resistive, as well as optical techniques. Several charge-related factors, including pH and ammonia concentrations, were identified as possible contributors to the characteristic of resonance detector profile. The setup enables probing the ionic byproducts of microbial metabolic activity at later stages of cell growth, where conventional optical detection methods have no discriminating power.

Highly efficient antibacterial iron oxide@carbon nanochains from wüstite precursor nanoparticles

A new hydrothermal synthesis approach involving the carbonization of glucose in the presence of wüstite (FeO) nanoparticles is presented, which leads to the fabrication of rapidly acting and potent antibacterial agents based on iron oxide@carbon (IO@C) nanochains. By using nonmagnetic FeO precursor nanoparticles that slowly oxidize into the magnetic Fe3O4 crystal structure under hydrothermal conditions, we were able to prepare well-defined and short-length IO@C nanochains that are highly dispersed in aqueous media and readily interact with bacterial cells, leading to a complete loss in bacterial cell viability within short incubation times at minimal dosage. The smaller IO@C nanochains synthesized using the FeO precursor nanoparticles can reach above 2-fold enhancement in microbe-killing activity when compared to the larger nanochains fabricated directly from Fe3O4 nanoparticles. In addition, the synthesized IO@C nanochains can be easily isolated using an external magnet and be subsequently recycled to effectively eradicate Escherichia coli cells even after five separate treatment cycles.