Utilizing zeta potential measurements to study the effective charge, membrane partitioning, and membrane permeation of the lipopeptide surfactin

Deciphering the distinct biocontrol activities of lipopeptides fengycin and surfactin through their differential impact on lipid membranes

Lipopeptides produced by beneficial bacilli present promising alternatives to chemical pesticides for plant biocontrol purposes. Our research explores the distinct plant biocontrol activities of lipopeptides surfactin (SRF) and fengycin (FGC) by examining their interactions with lipid membranes. Our study shows that FGC exhibits a direct antagonistic activity against Botrytis cinerea and no marked immune-eliciting activity in Arabidopsis thaliana while SRF only demonstrates an ability to stimulate plant immunity. It also reveals that SRF and FGC exhibit diverse effects on membrane integrity and lipid packing. SRF primarily influences membrane physical state without significant membrane permeabilization, while FGC permeabilizes membranes without significantly affecting lipid packing. From our results, we can suggest that the direct antagonistic activity of lipopeptides is linked to their capacity to permeabilize lipid membrane while the stimulation of plant immunity is more likely the result of their ability to alter the mechanical properties of the membrane. Our work also explores how membrane lipid composition modulates the activities of SRF and FGC. Sterols negatively impact both lipopeptides' activities while sphingolipids mitigate the effects on membrane lipid packing but enhance membrane leakage. In conclusion, our findings emphasize the importance of considering both membrane lipid packing and leakage mechanisms in predicting the biological effects of lipopeptides. It also sheds light on the intricate interplay between the membrane composition and the effectiveness of the lipopeptides, providing insights for targeted biocontrol agent design.

Exploring membrane asymmetry and its effects on membrane proteins

Plasma membranes utilize free energy to maintain highly asymmetric, non-equilibrium distributions of lipids and proteins between their two leaflets. In this review we discuss recent progress in quantitative research enabled by using compositionally controlled asymmetric model membranes. Both experimental and computational studies have shed light on the nuanced mechanisms that govern the structural and dynamic coupling between compositionally distinct bilayer leaflets. This coupling can increase the membrane bending rigidity and induce order - or lipid domains - across the membrane. Furthermore, emerging evidence indicates that integral membrane proteins not only respond to asymmetric lipid distributions but also exhibit intriguing asymmetric properties themselves. We propose strategies to advance experimental research, aiming for a deeper, quantitative understanding of membrane asymmetry, which carries profound implications for cellular physiology.

Characterization of Brazilian green propolis as a photosensitizer for LED light-induced antimicrobial photodynamic therapy (aPDT) against methicillin-resistant Staphylococcus aureus (MRSA) and Vancomycin-intermediate Staphylococcus aureus (VISA)

Staphylococcus aureus is the primary cause of skin and soft tissue infections. Its significant adaptability and the development of resistance are the main factors linked to its spread and the challenges in its treatment. Antimicrobial photodynamic therapy emerges as a promising alternative. This work aimed to characterize the antimicrobial photodynamic activity of Brazilian green propolis, along with the key bioactive compounds associated with this activity. Initially, a scanning spectrometry was conducted to assess the wavelengths with the potential to activate green propolis. Subsequently, reference strains of methicillin-resistant Staphylococcus aureus (MRSA ATCC 43300) and vancomycin-intermediate Staphylococcus aureus (VISA ATCC 700699) were exposed to varying concentrations of green propolis: 1 µg/mL, 5 µg/mL, 10 µg/mL, 50 µg /mL and 100 µg/mL and were stimulated by blue, green or red LED light. Finally, high-performance liquid chromatography coupled with a diode array detector and tandem mass spectrometry techniques, along with classic molecular networking analysis, was performed to identify potential bioactive molecules with photodynamic activity. Brazilian green propolis exhibits a pronounced absorption peak and heightened photo-responsiveness when exposed to blue light within the range of 400 nm and 450 nm. This characteristic reveals noteworthy significant photodynamic activity against MRSA and VISA at concentrations from 5 µg/mL. Furthermore, the propolis comprises compounds like curcumin and other flavonoids sourced from flavone, which possess the potential for photodynamic activity and other antimicrobial functions. Consequently, Brazilian green propolis holds promise as an excellent bactericidal agent, displaying a synergistic antibacterial property enhanced by light-induced photodynamic effects.

Vesicle budding caused by lysolipid-induced asymmetry stress

Lysolipids such as lauroyl, myristoyl, and palmitoyl lysophosphatidylcholine (LPC) insert into the outer leaflet of liposomes but do not flip to the inner leaflet over many hours. This way, they create asymmetry stress between the intrinsic areas of the two leaflets. We have studied how this stress is relaxed with particular emphasis on the budding and fission of small (diameter 20-30 nm) daughter vesicles (DVs). Asymmetric flow field-flow fractionation was utilized to quantify the extent of budding from large unilamellar vesicles after exposure to LPC. Budding starts at a low threshold of the order of 2 mol% LPC in the outer (and ≈0 mol% LPC in the inner) leaflet. We see reason to assume that the fractional fluorescence intensity from DVs is a good approximation for the fraction of membrane lipid, POPC, transferred into DVs. Accordingly, budding starts with a "budding power" of ≈6 POPC molecules budding off per LPC added, corresponding to a more than 10-fold accumulation of LPC in the outer leaflet of DVs to ≈24 mol%. As long as budding is possible, little strain is built up in the membranes, a claim supported by the lack of changes in limiting fluorescence anisotropy, rotational correlation time, and fluorescence lifetime of symmetrically and asymmetrically inserted TMA-DPH. At physiological osmolarity, budding is typically limited to 20-30% of budded fraction with some batch-to-batch variation, but independent of the LPC species. We hypothesize that the budding limit is determined by the excess area of the liposomes upon preparation, which is then used up upon budding given the larger area-to-volume ratio of smaller liposomes. As the mother vesicles approach ideal spheres, budding must stop. This is qualitatively supported by increased and decreased budding limits of osmotically predeflated and preinflated vesicles, respectively.

Complex electrostatic effects on the selectivity of membrane-permeabilizing cyclic lipopeptides

Cyclic lipopeptides (CLiPs) have many biological functions, including the selective permeabilization of target membranes, and technical and medical applications. We studied the anionic CLiP viscosin from Pseudomonas along with a neutral analog, pseudodesmin A, and the cationic viscosin-E2K to better understand electrostatic effects on target selectivity. Calcein leakage from liposomes of anionic phosphatidylglycerol (PG) and phosphatidylethanolamine (PE) is measured in comparison with net-neutral phosphatidylcholine by time-resolved fluorescence. By contrast to the typical selectivity of cationic peptides against anionic membranes, we find viscosin more active against PG/PE at 30 μM lipid than viscosin-E2K. At very low lipid concentration, the selectivity is reversed. An equi-activity analysis reveals the reciprocal partition coefficients, 1/K, and the CLiP-to-lipid mole ratio within the membrane as leakage after 1 h reaches 50%, Re50. As expected, 1/K to PG/PE is much lower (higher affinity) for viscosin-E2K (3 μM) than viscosin (15 μM). However, the local damage to the PG/PE membrane caused by a viscosin molecule is much stronger than that of viscosin-E2K. This can be explained by the strong membrane expansion due to PG/viscosin repulsion inducing asymmetry stress between the two leaflets and, ultimately, transient limited leakage at Re50 = 0.08. PG/viscosin-E2K attraction opposes expansion and leakage starts only as the PG charges in the outer leaflet are essentially compensated by the cationic peptide (Re50 = 0.32). In the high-lipid regime (at lipid concentrations cL ≫ 1/K), virtually all CLiP is membrane bound anyway and Re50 governs selectivity, favoring viscosin. In the low-lipid regime at cL ≪ 1/K, virtually all CLiP is in solution, 1/K becomes important and the "cation attacks anionic membrane" selectivity gets restored. Overall, activity and selectivity data can only properly be interpreted if the lipid regime is known and predictions for other lipid concentrations or cell counts require knowledge of 1/K and Re50.

The effect of membrane thickness on the membrane permeabilizing activity of the cyclic lipopeptide tolaasin II

Tolaasin II is an amphiphilic, membrane-active, cyclic lipopeptide produced by Pseudomonas tolaasii and is responsible for brown blotch disease in mushroom. To better understand the mode of action and membrane selectivity of tolaasin II and related lipopeptides, its permeabilizing effect on liposomes of different membrane thickness was characterized. An equi-activity analysis served to distinguish between the effects of membrane partitioning and the intrinsic activity of the membrane-bound peptide. It was found that thicker membranes require higher local peptide concentrations to become leaky. More specifically, the mole ratio of membrane-bound peptide per lipid needed to induce 50% leakage of calcein within 1 h, R_e ⁵⁰, increased monotonically with membrane thickness from 0.0016 for the 14:1 to 0.0070 for the 20:1 lipid-chains. Moreover, fast but limited leakage kinetics in the low-lipid regime were observed implying a mode of action based on membrane asymmetry stress in this time and concentration window. While the assembly of the peptide to oligomeric pores of defined length along the bilayer z-axis can in principle explain inhibition by increasing membrane thickness, it cannot account for the observed limited leakage. Therefore, reduced intrinsic membrane-permeabilizing activity with increasing membrane thickness is attributed here to the increased mechanical strength and order of thicker membranes.

Added Value of Biophysics to Study Lipid-Driven Biological Processes: The Case of Surfactins, a Class of Natural Amphiphile Molecules

The role of membrane lipids is increasingly claimed to explain biological activities of natural amphiphile molecules. To decipher this role, biophysical studies with biomimetic membrane models are often helpful to obtain insights at the molecular and atomic levels. In this review, the added value of biophysics to study lipid-driven biological processes is illustrated using the case of surfactins, a class of natural lipopeptides produced by Bacillus sp. showing a broad range of biological activities. The mechanism of interaction of surfactins with biomimetic models showed to be dependent on the surfactins-to-lipid ratio with action as membrane disturber without membrane lysis at low and intermediate ratios and a membrane permeabilizing effect at higher ratios. These two mechanisms are relevant to explain surfactins' biological activities occurring without membrane lysis, such as their antiviral and plant immunity-eliciting activities, and the one involving cell lysis, such as their antibacterial and hemolytic activities. In both biological and biophysical studies, influence of surfactin structure and membrane lipids on the mechanisms was observed with a similar trend. Hence, biomimetic models represent interesting tools to elucidate the biological mechanisms targeting membrane lipids and can contribute to the development of new molecules for pharmaceutical or agronomic applications.

A mini-review: mechanism of antimicrobial action and application of surfactin

Surfactin, an antibacterial lipopeptide produced by different strains of Bacillus subtilis, is a powerful biosurfactant. It also has multiple biological activities including antiviral, anti-mycoplasma and antiprotozoal activities, in addition to the broad-spectrum antimicrobial activities against Gram-positive bacteria, Gram-negative bacteria and fungi. Surfactin may be one of the promising alternatives to antibiotics. Surfactin's chemical structure and physicochemical properties are briefly discussed in this mini-review. Surfactin's antibacterial mechanism is mainly outlined as follows: (1) attacking pathogenic bacteria's cell membrane, causing cell membrane disintegration or osmotic pressure imbalance; (2) inhibiting pathogenic bacteria's protein synthesis, preventing cell reproduction; (3) inhibiting pathogenic bacteria's enzyme activity, affecting normal cell metabolism. This provides basis for the further research and application of surfactin. Finally, the application of surfactin in food and its prospect are summarized in brief.

Surface Characterization of Lipid Biomimetic Systems

Zeta potential and dipole potential measures are direct operational methodologies to determine the adsorption, insertion and penetration of ions, amphipathic and neutral compounds into the membranes of cells and model systems. From these results, the contribution of charged and dipole groups can be deduced. However, although each method may give apparent affinity or binding constants, care should be taken to interpret them in terms of physical meaning because they are not independent properties. On the base of a recent model in which the lipid bilayer is considered as composed by two interphase regions at each side of the hydrocarbon core, this review describes how dipole potential and zeta potential are correlated due to water reorganization. From this analysis, considering that in a cell the interphase region the membrane extends to the cell interior or overlaps with the interphase region of another supramolecular structure, the correlation of dipole and electrostatic forces can be taken as responsible of the propagation of perturbations between membrane and cytoplasm and vice versa. Thus, this picture gives the membrane a responsive character in addition to that of a selective permeability barrier when integrated to a complex system.

The Optimal Lipid Chain Length of a Membrane-Permeabilizing Lipopeptide Results From the Balance of Membrane Partitioning and Local Damage

Pseudodesmin A (PSD) is a cyclic lipodepsipeptide produced by Pseudomonas that kills certain bacteria at MIC_1/2 in the single micromolar range, probably by permeabilizing their cellular membranes. Synthetic PSD variants, where the native decanoic (C10) acyl chain is varied in length from C4 to C8 and C12 to C14 carbons, were described to be not or less active against a panel of gram-positive strains, as compared to native PSD-C10. Here, we test the membrane-permeabilizing activity of PSD-C4 through PSD-C14 in terms of calcein release from liposomes, which is characterized in detail by the fluorescence-lifetime based leakage assay. Antagonistic concentrations and their chain length dependence agree well for liposome leakage and antimicrobial activity. The optimal chain length is governed by a balance between membrane partitioning (favoring longer chains) and the local perturbation or “damage” inflicted by a membrane-bound molecule (weakening for longer chains). Local perturbation, in turn, may involve at least two modes of action. Asymmetry stress between outer and inner leaflet builds up as the lipopeptides enter the outer leaflet and when it reaches a system-specific stability threshold, it causes a transient membrane failure that allows for the flip of some molecules from the outer to the inner leaflet. This cracking-in may be accompanied by transient, incomplete leakage from the aqueous cores of the liposomes observed, typically, for some seconds or less. The mismatch of the lipopeptide with the lipid leaflet geometry, expressed for example in terms of a spontaneous curvature, has two effects. First, it affects the threshold for transient leakage as described. Second, it controls the rate of equilibrium leakage proceeding as the lipopeptide has reached sufficient local concentrations in both leaflets to form quasi-toroidal defects or pores. Both modes of action, transient and equilibrium leakage, synergize for intermediate chain lengths such as the native, i.e., for PSD-C10. These mechanisms may also account for the reported chain-length dependent specificities of antibiotic action against the target bacteria.

Membrane-water partitioning - Tackling the challenges of poorly soluble drugs using chaotropic co-solvents

Many newly developed drugs suffer from poor water solubility and low bioavailability and hence, need special formulation vehicles like vesicular or micellar drug delivery systems. The knowledge of their membrane-water partition coefficient K becomes critical as is governs drug loading and release from the vehicle, as well as absorption into the body. The dilemma is that measuring K is particularly challenging for these very compounds. Here we establish a strategy to resolve this problem. We added DMSO to shift K and solubility into a convenient range and extrapolated these results back to zero-DMSO. Isothermal titration calorimetry revealed that logK of the kinase inhibitor Lapatinib decreased proportionally to DMSO content (2.5 - 20v%) with a slope of -1/20v% (m value = 28 kJ/mol). This implies a K of 84 mM-1 in DMSO-free buffer. This strategy should be transferable to other poorly soluble drugs and further detection methods.

Post-synthesis nanostructuration of BSA-Capsaicin nanoparticles generated by sucrose excipient

In the pharmaceutical industry nano-hydrocolloid systems frequently coalesce or present nanoparticle aggregation after a long storage periods. Besides, the lyophilization process used to dry nanoparticles (NPs) produces loss of their original properties after dispersion. In this work we evaluated the effect on morphology and physicochemical properties of different protective excipients during drying of bovine serum albumin (BSA) NPs loaded with different concentrations of capsaicin. Capsaicin concentrations of 0, 812, 1625, 2437, and 3250 µg mL⁻¹ were used; subsequently, NPs were dried with deionized water (DW), NaCl (DN), sucrose (DS), and not dried (ND). We found that ND, DW, and DN treatments showed a negative effect on the NPs properties; while, DS reduced the aggregation and produced the formation of isolated nanoparticles at higher concentrations of capsaicin (3250 µg mL⁻¹), improving their circular shape, morphometrical parameters, and ζ-potential. The stability of the BSA-capsaicin NPs was associated to complex capsaicin/amino acid/water, in which GLY/GLN, ALA/HIS, ARG, THR, TYR, and Iso/CYS amino acids are involved in the restructuration of capsaicin molecules into the surface of nanoparticles during the drying process. The secondary nanostructuration in the post-synthesis stage can improve the molecular stability of the particles and the capacity of entrapping hydrophobic drugs, like capsaicin.

Bridging the Antimicrobial Activity of Two Lactoferricin Derivatives in E. coli and Lipid-Only Membranes

We coupled the antimicrobial activity of two well-studied lactoferricin derivatives, LF11-215 and LF11-324, in Escherichia coli and different lipid-only mimics of its cytoplasmic membrane using a common thermodynamic framework for peptide partitioning. In particular, we combined an improved analysis of microdilution assays with ζ-potential measurements, which allowed us to discriminate between the maximum number of surface-adsorbed peptides and peptides fully partitioned into the bacteria. At the same time, we measured the partitioning of the peptides into vesicles composed of phosphatidylethanolamine (PE), phosphatidylgylcerol (PG), and cardiolipin (CL) mixtures using tryptophan fluorescence and determined their membrane activity using a dye leakage assay and small-angle X-ray scattering. We found that the vast majority of LF11-215 and LF11-324 readily enter inner bacterial compartments, whereas only 1-5% remain surface bound. We observed comparable membrane binding of both peptides in membrane mimics containing PE and different molar ratios of PG and CL. The peptides' activity caused a concentration-dependent dye leakage in all studied membrane mimics; however, it also led to the formation of large aggregates, part of which contained collapsed multibilayers with sandwiched peptides in the interstitial space between membranes. This effect was least pronounced in pure PG vesicles, requiring also the highest peptide concentration to induce membrane permeabilization. In PE-containing systems, we additionally observed an effective shielding of the fluorescent dyes from leakage even at highest peptide concentrations, suggesting a coupling of the peptide activity to vesicle fusion, being mediated by the intrinsic lipid curvatures of PE and CL. Our results thus show that LF11-215 and LF11-324 effectively target inner bacterial components, while the stored elastic stress makes membranes more vulnerable to peptide translocation.

A Comparative Formulation Development and Evaluation of Tazarotene Ethosomal and Transfersomal Gel for Effective Management of Acne

Acne vulgaris is the most prevalent disorder in the period before puberty when increased adrenal androgen level causes enlargement of the sebaceous glands and it increased the production of sebum on the face, chest, and back. This disease is caused due to interaction between many causative agents or pathogenic components which lead to formation of the acne and those are seborrhea, follicular hyper keratinization, microbial formation of pilosebaceous unit by Propionibacterium acne and arrival of inflammatory mediators. Tazarotene is a well-known retinoid related to vitamin A that belongs to an acetylenic class of retinoid, used in the management of acne. Oral administration of Tazarotene causes changes in bone morphology after prolonged exposure to high doses, which also exhibit teratogenicity but this does not occur with topical delivery. Ethosomes are non-invasive delivery carriers enabling drugs to reach to the bottom of the skin layers and/or the system and transfersomes are the self-adaptable ultra-deformable flexible elastic bilayer vesicles composed of phospholipids able to penetrate through the pores of skin even smaller than its size. Present research aims the comparative evaluation of ethosomal and transfersomal gels loaded with Tazarotene in the treatment of acne. In the present study, ethosomes and transfersomes were formulated by the cold method and hand-shaking method, respectively, followed by loading of Tazarotene and development into gel formulation. The formulated gel samples were evaluated for in vitro release study, in vitro permeation study, in vitro anti-acne study, in vivo percutaneous permeation study by CLSM, and in vivo anti-acne study. The results proved that both the formulated ethosomal and transfersomal gels have better permeation through the skin but ethosomal gel showed better release in comparison to transfersomal gel, also final gels exhibited the anti-acne potentiality.

Lipid Scrambling Induced by Membrane-Active Substances

The functional roles of the lipid asymmetry of biomembranes are attracting increasing attention. This study characterizes the activity of surfactants to induce transmembrane flip-flop of lipids and thus "scramble" this asymmetry. Detergent-induced lipid scrambling of liposomes mimicking the charge asymmetry of bacterial membranes with 20 mol % of 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-glycerol in the outer leaflet only was quantified by ζ-potential measurements for octaethylene glycol dodecyl ether (C₁₂EO₈), octyl glucoside (OG), and dodecyl maltoside. Membrane leakage was separately measured by the fluorescence lifetime-based calcein leakage assay and the onset of the membrane-to-micelle transition by isothermal titration calorimetry. Partition coefficients and partial molar areas were obtained as well. For the quickly membrane-permeant C₁₂EO₈ and OG, leakage proceeds at a rather sharp threshold content in the membrane, which is well below the onset of solubilization and little dependent on incubation time; it is accompanied by fast lipid scrambling. However, unlike leakage, flip-flop is a relaxation process that speeds up gradually from taking weeks in the detergent-free membrane to minutes or less in the leaking membrane. Hence, after 24 h of incubation, 10 mol % of C₁₂EO₈ or 50 mol % of OG in the membrane suffice for virtually complete lipid scrambling, whereas leakage remains below 10% for up to 14 mol % of C₁₂EO₈ and 88 mol % of OG. There is thus a concentration window in which lipid scrambling proceeds without leakage. This implies that lipid scrambling must be considered a possible mode of action of antimicrobial peptides and other membrane-active drugs or biomolecules. A related, detergent-based protocol for scrambling the lipid asymmetry of liposomes and maybe cells without compromising their overall integrity would be a very valuable tool to study functions of lipid asymmetry.

Revealing the Mode of Action of Halictine Antimicrobial Peptides: A Comprehensive Study with Model Membranes

Antimicrobial peptides are innate host defense molecules with the ability to kill pathogens. They have been widely studied for their membrane lytic activity and their potential to overcome the ever-increasing threat of antimicrobial resistance against conventional antibiotics. Here, we focus on two halictines, antimicrobial peptides first obtained from the venom of the eusocial bee Halictus sexcinctus. The peptides, HAL-1 and HAL-2, are cationic (with +3 and +4 charges, respectively) and amphipathic, have 12 amino acid residues, and exhibit high biological activity. For this study, the mechanism of action of HAL-1 and HAL-2 was studied in detail using large and giant unilamellar vesicles composed of pure palmitoyl oleoyl phosphatidyl choline (POPC) and a mixture of POPC and the anionic lipid palmitoyl oleoyl phosphatidyl glycerol (POPG) as biomimetic models of the membranes of eukaryotes and microorganisms, respectively. A set of complementary techniques was put forward: carboxyfluorescein leakage assay, phase contrast optical microscopy, ζ-potential, static and dynamic light scattering, fluorescence and circular dichroism spectroscopies, and isothermal titration calorimetry. The results show that both halictines are able to interact strongly with anionic membranes: The interaction is exothermic and accompanied by structuring of the peptides as an α-helix and deep insertion into the membrane causing substantial membrane permeabilization at very low peptide/lipid molar ratios. Extensive vesicle aggregation was detected only at a high peptide concentration. On the other hand, the interaction of the halictines with POPC is significantly milder. Yet, the peptides were able to permeabilize the POPC membranes to some extent. Comparing both peptides, HAL-1 showed a somewhat stronger effect on model membranes. Fits to the data revealed apparent binding constants on the order of 10³-10⁴ M^-1 for anionic membranes and 1 order of magnitude lower for zwitterionic bilayers. When lytic activity results were compared at the same bound peptide/lipid ratio, the halictines exhibited a higher activity toward zwitterionic membranes. As novel peptides, small and with powerful activity, these halictines are potential candidates for becoming antimicrobial agents.

Transfersomes — A Nanoscience in Transdermal Drug Delivery and Its Clinical Advancements

The convenient nanotransdermal delivery system is always likely to have some ideal and unique characteristics, predominantly for safety, desired actions, clinical efficacy, enriched with a therapeutic index with minimal adverse occurrence. One of the most challenging tasks for the formulators is to transfer the medicament, especially macromolecules, through the skin. Some of the ways to achieve this is the use of a painful needle or some other methods which also have economical constraints. A new technology has been developed, that is ultradeformable liposomes, also called as transfersomes. These are an elastic type of lipid vesicle aggregates capable of delivering wide range of active moieties including various biomolecules. It can be manufactured by evaporation, vortexing, reverse-phase evaporation, ethanol injection or freeze-thaw methods, where phospholipids and edge activators are the major ingredients that contribute the main role in their unique mechanism of permeation through less permeable stratum corneum. This review mainly focuses on the clinical trial studies and patents accessible on transfersomal products worldwide, highlights the recent work on transfersomes with various therapeutic agents. An effort to explain the deeper penetration of transfersomes across the epidermis layer by its pharmacokinetics and dynamic properties has been taken.

Generation of BSA-capsaicin Nanoparticles and Their Hormesis Effect on the Rhodotorula mucilaginosa Yeast

Capsaicin is a chemical compound found in pungent chili peppers (Capsicum spp.). In biotechnology, capsaicin has been proposed as a pathogen control; however, its low solubility in water and high instability limits its uses. The aim of this work was to study the effect of high concentrations of capsaicin on the synthesis of nanoparticles and to evaluate their inhibitory effect on the growth of Rhodotorula mucilaginosa yeast. Bovine serum albumin (BSA)-capsaicin nanoparticles were formulated at 0, 16.2, 32.5, 48.7 and 65.0 µg of capsaicin per mg of BSA. Nanoparticle properties were evaluated and they were added to cultures of R. mucilaginosa to quantify their effect on cell viability. We found that increased capsaicin levels caused several changes to the physicochemical parameters, probably due to changes in the hydrophobicity sites of the albumin during the nanostructuration. The administration of nanoparticles to cultures of R. mucilaginosa produced a maximal viability with nanoparticles at 16.2 µg/mg; on the contrary, nanoparticles at 65.0 µg/mg caused maximal cell death. R. mucilaginosa cells displayed a hormesis effect in response to the nanoparticle dose concentration. The nanoparticles showed different responses during the uptake process, probably as a consequence of the nanostructural properties of capsaicin in the BSA molecules.

Nanovesicles for Nanomedicine: Theory and Practices

Lipid-based nanovesicles such as liposomes, niosomes, and ethosomes are now well recognized as potential candidates for drug delivery and theranostic applications. Some of them have already stepped forward from laboratory to market. The property to entrap lipophilic drugs in their bilayers and hydrophilic drugs in the aqueous milieu makes them a unique carrier for drug delivery. Delivery of drugs/diagnostics to various organs/tissues/cells via nanovesicles is considered to be a topic of long-standing interest with new challenges being posed to formulation scientists with new developments. The key challenge in this context is the physiological and pathological conditions, which make the delivery of drugs extremely difficult at the disease locus and makes their precise delivery ineffective. This chapter gives an insight into the role of novel nanovesicles in the field of drug delivery. We present an overview of the formulation and characterization and role of diverse nanovesicles. A comprehensive update about their application and current as well as potential challenges have also been discussed.

Fly ash based robust biocatalyst generation: a sustainable strategy towards enhanced green biosurfactant production and waste utilization

Biosurfactants have been well recognized as an environmentally friendly alternative to chemical surfactants. However, their production remains challenging due to low productivity, short-term microbe stability and the potentially toxic by-products generated in the growth media. To overcome these challenges, the emerging biofilm-based biosynthesis was investigated in this study. A fresh insight into the biosynthesis process was provided through using waste fly ash as a carrier material. The biofilm produced by biosurfactant producer B. subtilis N3-1P attached onto the surface of fly ash acted as a robust and effective biocatalyst. Zeta potential analysis and scanning electron microscope (SEM) characterization were conducted to help unravel the biocatalyst formation. High-value biosurfactant products were then produced in an efficient and sustainable manner. Stimulation by a fly ash assisted biocatalyst on biosurfactant production was confirmed. The biosurfactant yield was boosted over ten times after 24 hours, at a fly ash dosage of 0.5%. The highest biosurfactant yield was achieved after five days, with a final productivity of 305 critical micelle dilution. The underlying mechanism of fly ash assisted biosurfactant production was tracked through it exerting an effect on the quorum sensing system. Fourier-transform infrared (FTIR) spectroscopy and matrix assisted laser desorption/ionization-time of flight (MALDI-TOF) analysis demonstrated that the final biosurfactant product belonged to the lipopeptides. This research output is expected to accelerate the development of more effective bioreactors, and make a continuous contribution to high-value product generation and waste reduction.

Biosurfactants have been well recognized as an environmentally friendly alternative to chemical surfactants.

KR12 peptide associated with cyclodextrin: Antimicrobial and antitumor activities

The aim of this study was to determine the physical properties and antimicrobial and antiproliferative effects of the KR12 peptide complexed with 2-hydroxypropyl-β-cyclodextrin (Hp-βCd) in vitro. The KR12:Hp-βCd composition was evaluated for particle size and its zeta (ζ)-potential in the presence and absence of cells. Antimicrobial activity against Streptococcus mutans, Actinobacillus actinomycetemcomitans, and Porphyromonas gingivalis for the peptide alone or associated was evaluated by minimal inhibitory concentration. The cytotoxicity of the peptide and composition toward fibroblasts, Caco-2 cells, and A431 cells was determined using the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide; thiazolyl blue assay and hemolysis assay. Membrane integrity was analyzed by the lactate dehydrogenase assay. KR12:Hp-βCd decreased the peptide concentration required for the antimicrobial effect. Moreover, this composition was able to modify cell surface parameters, such as ζ-potential, and alter the degree of hemolysis induced by KR12. However, the KR12:Hp-βCd and KR12 alone alter the zeta potential of cells to a similar extent, suggesting a similar level of membrane interaction. The peptide alone inhibited the proliferation of Caco-2 and A431 cells more efficiently than KR12:Hp-βCd (p < 0.001), but did not show significant cytotoxic effects via the dehydrogenase lactate assay. Both substances were effective in inhibiting the growth of odontopathogenic bacteria, as well as inhibiting Caco-2 epithelial cells. These observations highlight the potential antimicrobial and antiproliferative effects of KR12 peptide alone or associated with Hp-βCd.

"Staying Out" Rather than "Cracking In": Asymmetric Membrane Insertion of 12:0 Lysophosphocholine

Interactions between detergents and model membranes are well described by the three-stage model: saturation and solubilization boundaries divide bilayer-only, bilayer-micelle coexistence, and micelle-only ranges. An underlying assumption of the model is the equilibration of detergent between the two membrane leaflets. However, many detergents partition asymmetrically at room temperature due to slow flip-flop, such as sodium dodecyl sulfate (SDS) and lysolipids. In this work, we use isothermal titration calorimetry (ITC) and dynamic light scattering (DLS) to investigate the solubilization of unilamellar POPC vesicles by 12:0 lysophosphocholine (12:0 LPC). Flip-flop of 12:0 LPC occurs beyond the time scale of our experiments, which establish a characteristic nonequilibrated state with asymmetric distribution: 12:0 LPC partitions primarily into the outer leaflet. Increasing asymmetry stress in the membrane does not lead to membrane failure, i.e., "cracking in" as seen for alkyl maltosides and other surfactants; instead, it reduces further membrane insertion which leads to the "staying out" of 12:0 LPC in solution. At above the critical micellar concentration of 12:0 LPC in the presence of the membrane, micelles persist and accommodate further LPC but take up lipid from vesicles only very slowly. Ultimately, solubilization proceeds via the micellar mechanism (Kragh-Hansen et al., 1995). With a combination of demicellization and solubilization experiments, we quantify the molar ratio partition coefficient (0.6 ± 0.1 mM^-1) and enthalpy of partitioning (6.1 ± 0.3 kJ·mol^-1) and estimate the maximum detergent/lipid ratio reached in the outer leaflet (<0.13). Despite the inapplicability of the three-stage model to 12:0 LPC at room temperature, we are able to extract quantitative information from ITC solubilization experiments and DLS that are important for the understanding of asymmetry-dependent processes such as endocytosis and the gating of mechanosensitive channels in vitro.

Vesicle Leakage Reflects the Target Selectivity of Antimicrobial Lipopeptides from Bacillus subtilis

Cyclic lipopeptides act against a variety of plant pathogens and are thus highly efficient crop-protection agents. Some pesticides contain Bacillus subtilis strains that produce lipopeptide families, such as surfactins (SF), iturins (IT), and fengycins (FE). The antimicrobial activity of these peptides is mainly mediated by permeabilizing cellular membranes. We used a fluorescence-lifetime based leakage assay to examine the effect of individual lipid components in model membranes on lipopeptide activity. Leakage induction by FE was strongly inhibited by cholesterol (CHOL) as well as by phosphatidylethanolamine (PE) and -glycerol (PG) lipids. Already moderate amounts of CHOL increased the tolerable FE content in membranes by an order of magnitude to 0.5 FE per PC + CHOL. This indicates reduced FE-lipid demixing and aggregation, which is known to be required for membrane permeabilization and explains the strong inhibition by CHOL. Ergosterol (ERG) had a weak antagonistic effect. This confirms results of microbiological tests and agrees with the fungicidal activity and selectivity of FE. SF is known to be much less selective in its antimicrobial action. In line with this, liposome leakage by SF was little affected by sterols and PE. Interestingly, PG increased SF activity and changed its leakage mechanism toward all-or-none, suggesting more specific, larger, and/or longer-lived defect structures. This may be because of the reduced energetic cost of locally accumulating anionic SF in an anionic lipid matrix. IT was found largely inactive in our assays. B. subtilis QST713 produces the lipopeptides in a ratio of 6 mol SF: 37 mol FE: 57 mol IT. Leakage induced by this native mixture was inhibited by CHOL and PE, but unaffected by ERG and by PG in the absence of PE. Note that fungi contain anionic lipids, but little PE. Hence, our data explain the strong, fungicidal activity and selectivity of B. subtilis QST713 lipopeptides.

Charge-Mediated Localization of Conjugated Polythiophenes in Zwitterionic Model Cell Membranes

The selective engineering of conjugated polyelectrolyte (CPE)-phospholipid interfaces is poised to play a key role in the design of advanced biomedical and biotechnological devices. Herein, we report a strategic study to investigate the relationship between the charge of the CPE side group and their association with zwitterionic phospholipid bilayers. The interaction of dipalmitoylphosphatidylcholine (DPPC) phospholipid vesicles with a series of poly(thiophene)s bearing zwitterionic, cationic, or anionic terminal groups (P3Zwit, P3TMAHT and P3Anionic, respectively) has been probed. Although all CPEs showed an affinity for the zwitterionic vesicles, the calculated partition coefficients determined using photoluminescence spectroscopy suggested preferential incorporation within the lipid bilayer in the order P3Zwit > P3Anionic ≫ P3TMAHT. The polarity probe Prodan was used to further qualify the position of the CPE inside the vesicle bilayers via Förster resonance energy transfer (FRET) studies. The varying proximity of the CPEs to Prodan was reflected in the Stern-Volmer quenching constants and decreased in the order P3Anionic > P3TMAHT ≫ P3Zwit. Dynamic light scattering measurements showed an increase in the hydrodynamic diameter of the DPPC vesicles upon addition of each poly(thiophene), but to the greatest extent for P3Anionic. Small-angle neutron scattering studies also revealed that P3Anionic specifically increased the thickness of the headgroup region of the phospholipid bilayer. Epifluorescence and atomic force microscopy imaging showed that P3TMAHT formed amorphous agglomerates on the vesicle surface, P3Zwit was buried throughout the bilayer, and P3Anionic formed a shell of protruding chains around the surface, which promoted vesicle fusion. The global data indicate three distinctive modes of interaction for the poly(thiophene)s within DPPC vesicles, whereby the nature of the association is ultimately controlled by the pendant charge group on each CPE chain. Our results suggest that charge-mediated self-assembly may provide a simple and effective route to design luminescent CPE probes capable of specific localization within phospholipid membranes.

Membrane interactions of proline-rich antimicrobial peptide, Chex1-Arg20, multimers

The increasing prevalence of antibiotic-resistant pathogens requires the development of new antibiotics. Proline-rich antimicrobial peptides (PrAMPs), including native apidaecins, Bac7, and oncocins or designed A3APO, show multi-modal actions against pathogens together with immunostimulatory activities. The interactions of the designed PrAMP, Chex1-Arg20, and its dimeric and tetrameric oligomers with different model membranes were investigated by circular dichroism spectroscopy, dynamic light scattering, zeta potential, differential scanning calorimetry, and dye leakage. Chex1-Arg20 oligomers showed stronger affinity and preferential binding to negatively charged phospholipid bilayers and led to lipid aggregation and neutralization. Fluorescence microscopy of negatively charged giant unilamellar vesicles with AlexFluor-647-labeled Chex1-Arg20 dimers and tetramers displayed aggregation at a peptide/lipid low ratio of 1:200 and at higher peptide concentrations (1:100/1:50) for Chex1-Arg20 monomer. Such interactions, aggregation, and neutralization of PrAMP oligomers additionally showed the importance of interactions of PrAMPs with negatively charged membranes.

Sequential detection of multiple phase transitions in model biological membranes using a red-emitting conjugated polyelectrolyte

Charge-mediated assembly of an anionic poly(thiophene) leads to a highly sensitive probe of membrane order.

Correlating antimicrobial activity and model membrane leakage induced by nylon-3 polymers and detergents

Most antimicrobial peptides act upon target microorganisms by permeabilizing their membranes. The mode of action is often assessed by vesicle leakage experiments that use model membranes, with the assumption that biological activity correlates with the permeabilization of the lipid bilayer. The current work aims to extend the interpretation of vesicle leakage results and examine the correlation between vesicle leakage and antimicrobial activity. To this end, we used a lifetime-based leakage assay with calcein-loaded vesicles to study the membrane permeabilizing properties of a novel antifungal polymer poly-NM, two of its analogs, and a series of detergents. In conjunction, the biological activities of these compounds against Candida albicans were assessed and correlated with data from vesicle leakage. Poly-NM induces all-or-none leakage in polar yeast lipid vesicles at the polymer's MIC, 3 μg mL(-1). At this and higher concentrations, complete leakage after an initial lag time was observed. Concerted activity tests imply that this polymer acts independently of the detergent octyl glucoside (OG) for both vesicle leakage and activity against C. albicans spheroplasts. In addition, poly-NM was found to have negligible activity against zwitterionic vesicles and red blood cells. Our results provide a consistent, detailed picture of the mode of action of poly-NM: this polymer induces membrane leakage by electrostatic lipid clustering. In contrast, poly-MM:CO, a nylon-3 polymer comprised of both cationic and hydrophobic segments, seems to act by a different mechanism that involves membrane asymmetry stress. Vesicle leakage for this polymer is transient (limited to <100%) and graded, non-specific among zwitterionic and polar yeast lipid vesicles, additive with detergent action, and correlates poorly with biological activity. Based on these results, we conclude that comprehensive leakage experiments can provide a detailed description of the mode of action of membrane permeabilizing compounds. Without this thorough approach, it would have been logical to assume that the two nylon-3 polymers we examined act via similar mechanisms; it is surprising that their mechanisms are so distinct. Some, but not all mechanisms of vesicle permeabilization allow for antimicrobial activity.

A bivalent cationic dye enabling selective photo-inactivation against Gram-negative bacteria

Selective photoinactivation against Gram-negative bacteria over Gram-positive bacteria was successfully realized by a bivalent triarylmethane dye.