Effect of lamellarity and size on calorimetric phase transitions in single component phosphatidylcholine vesicles

Optimisation and in-vivo evaluation of extracted Karanjin loaded liposomal topical formulation for treatment of psoriasis in tape-stripped mouse model

AIM

The present work is focus on development of anti-psoriasis activity of Karanjin (isolated from Pongamia pinnata seed oil) loaded liposome based lotion for enhancement of skin permeation and retention.

METHOD

Karanjin was isolated using liquid-liquid extraction method and characterised by HPLC analysis and partition coefficient. Further, isolated Karanjin was loaded into liposomes using thin-film hydration technique and optimised by Box-Behnken design. Selected optimised batch was characterised their mean diameter, PDI, zeta potential, and entrapment efficiency, morphology (by TEM), FTIR and ex-vivo skin retention. Additionally, Karanjin loaded liposomes were formulated into lotion and characterise their rheological, spreadability, texture, ex-vivo skin permeation & retention, stability and anti-psoriatic activity in mouse tail model.

RESULT

The yield of Karanjin from seed oil was 0.1% w/v and have lipophilic nature. The optimised liposomal formulation showed 195 ± 1.8 nm mean diameter, 0.271 ± 0.02 PDI, -27.0 ± 2.1 mV zeta potential and 61.97 ± 2.5% EE. TEM image revel the spherical shap of liposome surrounded by single phospholipid bilayer and no interection between drug and excipients. Further, lotion was prepared by 0.1% w/v carbopol and found to 615 mPa.sec viscosity, good thixotropic behaviour, spreadability and texture. There was 22.44% increase in drug permeation for Karanjin loaded liposomal lotion compared to pure Karanjin lotion, confirm by ex-vivo permeation and retention. While, in-vivo study revel the liposomal lotion of Karanjin was found to have 16.09% higher drug activity then 5% w/w conventional Karanjin lotion.

CONCLUSION

Karanjin loaded liposomal lotion have an effective anti-psoriatic agent and showed better skin permeation and retention than the conventional Karanjin lotion.

The ATPase activity of ABCA1 is increased by cholesterol in the presence of anionic lipids

High-density lipoprotein (HDL) transports excess cholesterol from peripheral tissues back to the liver, and plasma HDL levels are inversely related to cardiovascular disease incidence. ATP-binding cassette A1 (ABCA1) is a member of the ABC protein superfamily, and generates nascent HDL, which consists of several hundreds of phospholipids and cholesterol wrapped by apolipoprotein A-I (apoA-I). However, it remains unclear whether cholesterol is a transport substrate of ABCA1. Since ATP hydrolysis of ABC proteins is typically increased by their transport substrates, we characterized the effects of cholesterol on the ATPase activity of purified ABCA1 using liposomes of various lipid compositions. ABCA1 showed substantial ATPase activity (20-30 nmol$\cdot$min-1$\cdot$mg-1) only in liposomes containing anionic lipids, including phosphatidylserine. Cholesterol increased the ATPase activity by 1.6- to 3-fold in the presence of anionic lipids. Moreover, phosphatidylserine addition to BHK/ABCA1 cells increased phosphatidylcholine and cholesterol efflux to apoA-I. Next, we investigated the sterol specificity of ABCA1. The ATPase activity of ABCA1 was strongly enhanced by desmosterol and zymosterol, similar to cholesterol. In contrast, 7-dehydrocholesterol and lathosterol weakly increased the ATPase activity, and no increase was observed with stigmasterol or brassicasterol. These findings suggest that ABCA1 transports cholesterol and prefers cholesterol over plant sterols as a transport substrate.

Preparation of pectin-coated and chitosan-coated phenylethanoside liposomes: Studies on characterization, stability, digestion and release behavior

In this paper, the effects of extrusion, ultrasound on physicochemical properties of liposomes were studied, and the liposomes were prepared by ethanol injection combined with extrusion-ultrasound. In addition, the quality of PhGs lips, pectin-coated PhGs lips (P-lips) and chitosan-coated PhGs lips (C-lips) was evaluated by the average particle size, encapsulation efficiency (EE) and other indicators, which indicated that the nanoparticles had been successfully prepared. Compared with extrusion or ultrasonic operation alone, the EEs of ethanol injection combined with extrusion-ultrasonic increased by 8 % and 18 % respectively. Subsequently, transmission electron microscopy, Fourier transform infrared spectroscopy and DSC thermal analysis showed that PhGs in PhGs lips may produce hydrogen bonding forces with phospholipids, and pectin and chitosan in P-lips and C-lips were not only coated on the surface of PhGs lips, but also might have some interaction between them. Cell experiments showed that PhGs lips, P-lips and C-lips can effectively improve the bioavailability of PhGs. In addition, the storage stability of P-lips and C-lips was not significantly improved compared to PhGs lips, but their digestive stability was significantly improved, and the final retention rate in simulated intestinal fluid was about 25 % higher than that of PhGs lips.

Oseltamivir phosphate interaction with model membranes

Oseltamivir belongs to the neuraminidase inhibitors, developed against the influenza virus, and registered under the trademark Tamiflu. Despite its long-term acquaintance, there is limited information in the literature about its physicochemical and structural properties in a lipid-water system. We present an experimentally determined partition coefficient with structural information on the interaction of oseltamivir with the model membrane, its possible location, and its effect on the membrane thermodynamics. The hydrophobic part of the lipid bilayer is affected to a moderate extent, which was proved by slight changes in thermal and structural properties. Hereby, interaction of oseltamivir with the phospholipid bilayer induces concentration dependent decrease of lateral pressure in the bilayer acyl chain region. Oseltamivir charges the bilayer surface positively, which results in the zeta potential increase and changes in anisotropic properties studied by the polarised light microscopy. At the highest oseltamivir concentrations studied, the multilamellar structure is extensively disturbed, likely due to electrostatic repulsion between the adjacent bilayers.

Phasor-FLIM-guided unraveling of ATRA supramolecular organization in liposomal nanoformulations

Here we use fluorescence lifetime imaging microscopy (FLIM) to study the supramolecular organization of nanoencapsulated liposomal all-trans retinoic acid (ATRA), exploiting ATRA's intrinsic fluorescence as a source of signal and phasor transformation as a fit-free analytical approach to lifetime data. Our non-invasive method is suitable for checking for the presence of a fraction of ATRA molecules interacting with liposomal membranes. The results are validated by independent small-angle X-ray scattering (SAXS) and nano-differential scanning calorimetry (NanoDSC) measurements, probing ATRA's putative position on the membrane and effect on membrane organization. Besides the insights on the specific case-study proposed, the present results confirm the effectiveness of Phasor-FLIM analysis in elucidating the nanoscale supramolecular organization of fluorescent drugs in pharmaceutical formulations. This underscores the importance of leveraging advanced imaging techniques to deepen our understanding and optimize drugs' performance in delivery applications.

Lipid bilayer properties potentially contributed to the evolutionary disappearance of betaine lipids in seed plants

BACKGROUND

Many organisms rely on mineral nutrients taken directly from the soil or aquatic environment, and therefore, developed mechanisms to cope with the limitation of a given essential nutrient. For example, photosynthetic cells have well-defined responses to phosphate limitation, including the replacement of cellular membrane phospholipids with non-phosphorous lipids. Under phosphate starvation, phospholipids in extraplastidial membranes are replaced by betaine lipids in microalgae. In higher plants, the synthesis of betaine lipid is lost, driving plants to other strategies to cope with phosphate starvation where they replace their phospholipids by glycolipids.

RESULTS

The aim of this work was to evaluate to what extent betaine lipids and PC lipids share physicochemical properties and could substitute for each other. By neutron diffraction experiments and dynamic molecular simulation of two synthetic lipids, the dipalmitoylphosphatidylcholine (DPPC) and the dipalmitoyl-diacylglyceryl-N,N,N-trimethylhomoserine (DP-DGTS), we found that DP-DGTS bilayers are thicker than DPPC bilayers and therefore are more rigid. Furthermore, DP-DGTS bilayers are more repulsive, especially at long range, maybe due to unexpected unscreened electrostatic contribution. Finally, DP-DGTS bilayers could coexist in the gel and fluid phases.

CONCLUSION

The different properties and hydration responses of PC and DGTS provide an explanation for the diversity of betaine lipids observed in marine organisms and for their disappearance in seed plants.

Novel liposomal formulations for protection and delivery of levodopa: Structure-properties correlation

Liposomes are promising drug carriers for a wide range of central nervous system disorders, such as Parkinson's disease (PD), since they can protect active substances from degradation and could be administered intranasally, ensuring a direct access to the brain. Levodopa (LD), the drug commonly used to treat PD, spontaneously oxidizes in aqueous solutions and thus needs to be stabilized. Our investigation focuses on the preparation and the physico-chemical characterization of mixed liposomes to vehiculate LD and two natural substances (L-ascorbic acid and quercetin) that can prevent its oxidation and contribute to the treatment of Parkinson's disease. These co-loaded vesicles were prepared using a saturated phospholipid and structurally related cationic or analogue N-oxide surfactants and showed different properties, based on their composition. In particular, ex-vivo permeability tests using porcine nasal mucosa were performed, denoting that subtle variations of the lipids structure can significantly affect the delivery of LD to the target site.

A Facile Method to Coat Nanoparticles with Lipid Bilayer Membrane: Hybrid Silica Nanoparticles Disguised as Biomembrane Vesicles by Particle Penetration of Concentrated Lipid Layers

Natural membrane vesicles, including extracellular vesicles and enveloped viruses, participate in various events in vivo. To study and manipulate these events, biomembrane-coated nanoparticles inspired by natural membrane vesicles are developed. Herein, an efficient method is presented to prepare organic-inorganic hybrid materials in high yields that can accommodate various lipid compositions and particle sizes. To demonstrate this method, silica nanoparticles are passed through concentrated lipid layers prepared using density gradient centrifugation, followed by purification, to obtain lipid membrane-coated nanoparticles. Various lipids, including neutral, anionic, and cationic lipids, are used to prepare concentrated lipid layers. Single-particle analysis by imaging flow cytometry determines that silica nanoparticles are uniformly coated with a single lipid bilayer. Moreover, cellular uptake of silica nanoparticles is enhanced when covered with a lipid membrane containing cationic lipids. Finally, cell-free protein expression is applied to embed a membrane protein, namely the Spike protein of severe acute respiratory syndrome coronavirus 2, into the coating of the nanoparticles, with the correct orientation. Therefore, this method can be used to develop organic-inorganic hybrid nanomaterials with an inorganic core and a virus-like coating, serving as carriers for targeted delivery of cargos such as proteins, DNA, and drugs.

Liposomes or Extracellular Vesicles: A Comprehensive Comparison of Both Lipid Bilayer Vesicles for Pulmonary Drug Delivery

The rapid and non-invasive pulmonary drug delivery (PDD) has attracted great attention compared to the other routes. However, nanoparticle platforms, like liposomes (LPs) and extracellular vesicles (EVs), require extensive reformulation to suit the requirements of PDD. LPs are artificial vesicles composed of lipid bilayers capable of encapsulating hydrophilic and hydrophobic substances, whereas EVs are natural vesicles secreted by cells. Additionally, novel LPs-EVs hybrid vesicles may confer the best of both. The preparation methods of EVs are distinguished from LPs since they rely mainly on extraction and purification, whereas the LPs are synthesized from their basic ingredients. Similarly, drug loading methods into/onto EVs are distinguished whereby they are cell- or non-cell-based, whereas LPs are loaded via passive or active approaches. This review discusses the progress in LPs and EVs as well as hybrid vesicles with a special focus on PDD. It also provides a perspective comparison between LPs and EVs from various aspects (composition, preparation/extraction, drug loading, and large-scale manufacturing) as well as the future prospects for inhaled therapeutics. In addition, it discusses the challenges that may be encountered in scaling up the production and presents our view regarding the clinical translation of the laboratory findings into commercial products.

Interaction of GC376, a SARS-COV-2 MPRO inhibitor, with model lipid membranes

Partitioning and effect of antiviral GC376, a potential SARS-CoV-2 inhibitor, on model lipid membranes was studied using dynamic light scattering (DLS), UV–VIS spectrometry, Excimer fluorescence, Differential scanning calorimetry (DSC) and Small- and Wide-angle X-ray scattering (SAXS/WAXS). Partition coefficient of GC376 between lipid and water phase was found to be low, reaching K_P = 46.8 ± 18.2. Results suggest that GC376 partitions into lipid bilayers at the level of lipid head-groups, close to the polar/hydrophobic interface. Changes in structural and thermodynamic properties strongly depend on the GC376/lipid mole ratio. Already at lowest mole ratios GC376 induces increase of lateral pressures, mainly in the interfacial region of the bilayer. Hereby, the pre- and main-transition temperature of the lipid system increases, what is attributed to tighter packing of acyl chains induced by GC376. At GC376/DPPC ≥ 0.03 mol/mol we detected formation of domains with different GC376 content resulting in the lateral phase separation and changes in both, main transition temperature and enthalpy. The observed changes are attributed to the response of the system on the increased lateral stresses induced by partitioning of GC376. Obtained results are discussed in context of liposome-based drug delivery systems for GC376 and in context of indirect mechanism of virus replication inhibition.

Deciphering the origin of the melting profile of unilamellar phosphatidylcholine liposomes by measuring the turbidity of its suspensions

The elucidation of the thermal properties of phosphatidylcholine liposomes is often based on the analysis of the thermal capacity profiles of multilamellar liposomes (MLV), which may qualitatively disagree with those of unilamellar liposomes (LUV). Experiments and interpretation of LUV liposomes is further complicated by aggregation and lamellarization of lipid bilayers in a short time period, which makes it almost impossible to distinguish the signatures of the two types of bilayers. To characterize independently MLV and LUV of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), the latter were prepared with the addition of small amounts of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylglycerol (DPPG) which, due to the sterical hindrance and negative charge at a given pH value, cause LUV repellence and contribute to their stability. Differential scanning calorimetry curves and temperature-dependent UV/Vis spectra of the prepared MLV and LUV were measured. Multivariate analysis of spectrophotometric data determined the phase transition temperatures (pretransition at T_p and the main phase transition at T_m), and based on the changes in turbidities, the thickness of the lipid bilayer in LUV was determined. The obtained data suggested that the curvature change is a key distinguishing factor in MLV and LUV heat capacity profiles. By combining the experimental results and those obtained by MD simulations, the interfacial water layer was characterized and its contribution to the thermal properties of LUV was discussed.

Multiscale Dynamics of Lipid Vesicles in Polymeric Microenvironment

Understanding dynamic and complex interaction of biological membranes with extracellular matrices plays a crucial role in controlling a variety of cell behavior and functions, from cell adhesion and growth to signaling and differentiation. Tremendous interest in tissue engineering has made it possible to design polymeric scaffolds mimicking the topology and mechanical properties of the native extracellular microenvironment; however, a fundamental question remains unanswered: that is, how the viscoelastic extracellular environment modifies the hierarchical dynamics of lipid membranes. In this work, we used aqueous solutions of poly(ethylene glycol) (PEG) with different molecular weights to mimic the viscous medium of cells and nearly monodisperse unilamellar DMPC/DMPG liposomes as a membrane model. Using small-angle X-ray scattering (SAXS), dynamic light scattering, temperature-modulated differential scanning calorimetry, bulk rheology, and fluorescence lifetime spectroscopy, we investigated the structural phase map and multiscale dynamics of the liposome–polymer mixtures. The results suggest an unprecedented dynamic coupling between polymer chains and phospholipid bilayers at different length/time scales. The microviscosity of the lipid bilayers is directly influenced by the relaxation of the whole chain, resulting in accelerated dynamics of lipids within the bilayers in the case of short chains compared to the polymer-free liposome case. At the macroscopic level, the gel-to-fluid transition of the bilayers results in a remarkable thermal-stiffening behavior of polymer–liposome solutions that can be modified by the concentration of the liposomes and the polymer chain length.

Solid Magnetoliposomes as Multi-Stimuli-Responsive Systems for Controlled Release of Doxorubicin: Assessment of Lipid Formulations

Stimuli-responsive liposomes are a class of nanocarriers whose drug release occurs, preferentially, when exposed to a specific biological environment, to an external stimulus, or both. This work is focused on the design of solid magnetoliposomes (SMLs) as lipid-based nanosystems aiming to obtain multi-stimuli-responsive vesicles for doxorubicin (DOX) controlled release in pathological areas under the action of thermal, magnetic, and pH stimuli. The effect of lipid combinations on structural, colloidal stability, and thermodynamic parameters were evaluated. The results confirmed the reproducibility for SMLs synthesis based on nine lipid formulations (combining DPPC, DSPC, CHEMS, DOPE and/or DSPE-PEG), with structural and colloidal properties suitable for biological applications. A loss of stability and thermosensitivity was observed for formulations containing dioleoylphosphatidylethanolamine (DOPE) lipid. SMLs PEGylation is an essential step to enhance both their long-term storage stability and stealth properties. DOX encapsulation (encapsulation efficiency ranging between 87% and 96%) in the bilayers lowered its pK_a, which favors the displacement of DOX from the acyl chains to the surface when changing from alkaline to acidic pH. The release profiles demonstrated a preferential release at acidic pH, more pronounced under mimetic mild-hyperthermia conditions (42 °C). Release kinetics varied with the lipid formulation, generally demonstrating hyperthermia temperatures and acidic pH as determining factors in DOX release; PEGylation was shown to act as a diffusion barrier on the SMLs surface. The integrated assessment and characterization of SMLs allows tuning lipid formulations that best respond to the needs for specific controlled release profiles of stimuli-responsive nanosystems as a multi-functional approach to cancer targeting and therapy.

Changes Experienced by Low-Concentration Lipid Bicelles as a Function of Temperature

Differential scanning calorimetry (DSC) of dipalmitoyl phosphatidylcholine (DPPC), dihexanoyl phosphatidylcholine, and dipalmitoyl phosphatidylglycerol bicelles reveals two endothermic peaks. Based on analysis of small angle neutron scattering and small angle X-ray scattering data, the two DSC peaks are associated with the melting of DPPC and a change in bicellar morphology─namely, either bicelle-to-spherical vesicle or oblate-to-spherical vesicle. The reversibility of the two structural transformations was examined by DSC and found to be consistent with the corresponding small angle scattering data. However, the peak that is not associated with the melting of DPPC does not correspond to any structural transformation for bicelles containing distearoyl phosphatidylethanolamine conjugated with polyethylene glycol. Based on complementary experimental data, we conclude that membrane flexibility, lipid miscibility, and differential solubility between the long- and short-chain lipids in water are important parameters controlling the reversibility of morphologies experienced by the bicelles.

Calorimetry of extracellular vesicles fusion to single phospholipid membrane

Extracellular vesicles (EVs)-mediated communication relies not only on the delivery of complex molecular cargoes as lipids, proteins, genetic material, and metabolites to their target cells but also on the modification of the cell surface local properties induced by the eventual fusion of EVs' membranes with the cells' plasma membrane. Here we applied scanning calorimetry to study the phase transition of single phospholipid (DMPC) monolamellar vesicles, investigating the thermodynamical effects caused by the fusion of doping amounts of mesenchymal stem cells-derived EVs. Specifically, we studied EVs-induced consequences on the lipids distributed in the differently curved membrane leaflets, having different density and order. The effect of EV components was found to be not homogeneous in the two leaflets, the inner (more disordered one) being mainly affected. Fusion resulted in phospholipid membrane flattening associated with lipid ordering, while the transition cooperativity, linked to membrane domains' coexistence during the transition process, was decreased. Our results open new horizons for the investigation of the peculiar effects of EVs of different origins on target cell membrane properties and functionality.

Scattering versus fluorescence self-quenching: more than a question of faith for the quantification of water flux in large unilamellar vesicles?

The endeavors to understand the determinants of water permeation through membrane channels, the effect of the lipid or polymer membrane on channel function, the development of specific water flow inhibitors, the design of artificial water channels and aquaporins for the use in industrial water filtration applications all rely on accurate ways to quantify water permeabilities (P f). A commonly used method is to reconstitute membrane channels into large unilamellar vesicles (LUVs) and to subject these vesicles to an osmotic gradient in a stopped-flow device. Fast recordings of either scattered light intensity or fluorescence self-quenching signals are taken as a readout for vesicle volume change, which in turn can be recalculated to accurate P f values. By means of computational and experimental data, we discuss the pros and cons of using scattering versus self-quenching experiments or subjecting vesicles to hypo- or hyperosmotic conditions. In addition, we explicate for the first time the influence of the LUVs size distribution, channel distribution between vesicles and remaining detergent after protein reconstitution on P f values. We point out that results such as the single channel water permeability (p f) depend on the membrane matrix or on the direction of the applied osmotic gradient may be direct results of the measurement and analysis procedure.

Polyhydroxyalkanoate Nanoparticles for Pulmonary Drug Delivery: Interaction with Lung Surfactant

Polyhydroxyalkanoates (PHA) are polyesters produced intracellularly by many bacterial species as energy storage materials, which are used in biomedical applications, including drug delivery systems, due to their biocompatibility and biodegradability. In this study, we evaluated the potential application of this nanomaterial as a basis of inhaled drug delivery systems. To that end, we assessed the possible interaction between PHA nanoparticles (NPs) and pulmonary surfactant using dynamic light scattering, Langmuir balances, and epifluorescence microscopy. Our results demonstrate that NPs deposited onto preformed monolayers of DPPC or DPPC/POPG bind these surfactant lipids. This interaction facilitated the translocation of the nanomaterial towards the aqueous subphase, with the subsequent loss of lipid from the interface. NPs that remained at the interface associated with liquid expanded (LE)/tilted condensed (TC) phase boundaries, decreasing the size of condensed domains and promoting the intermixing of TC and LE phases at submicroscopic scale. This provided the stability necessary for attaining high surface pressures upon compression, countering the destabilization induced by lipid loss. These effects were observed only for high NP loads, suggesting a limit for the use of these NPs in pulmonary drug delivery.

UV Properties and Loading into Liposomes of Quinoline Derivatives

The scientific relevance of quinolines is strictly linked to the fine-tuning of their features by functionalizing the heterocyclic core. Consequently, the compounds of this class are very versatile and can be used as possible drugs for a lot of medical applications. In this work, the inclusion of eight synthetic quinoline derivatives in liposomes formulated with different lipids was investigated in terms of the encapsulation efficiency and to highlight the effect on the liposome size distribution and thermotropic behavior. Excellent encapsulation was accomplished with all the quinoline/phospholipid combinations. Differences in the interactions at the molecular level, dependent on the quinoline molecular scaffolds and lipid structure, were observed, which could significantly bias the interaction with the drug and its release in pharmaceutical applications. Experiments in combination with computational studies demonstrated that the UV absorption of quinolines with expanded conjugation could be affected by the environment polarity. This was probably due to a solvent-dependent ability of these quinolines to stack into aggregates, which could also occur upon inclusion into the lipid bilayer.

Amyloid-Mediated Mechanisms of Membrane Disruption

Protein aggregation and amyloid formation are pathogenic events underlying the development of an increasingly large number of human diseases named “proteinopathies”. Abnormal accumulation in affected tissues of amyloid β (Aβ) peptide, islet amyloid polypeptide (IAPP), and the prion protein, to mention a few, are involved in the occurrence of Alzheimer’s (AD), type 2 diabetes mellitus (T2DM) and prion diseases, respectively. Many reports suggest that the toxic properties of amyloid aggregates are correlated with their ability to damage cell membranes. However, the molecular mechanisms causing toxic amyloid/membrane interactions are still far to be completely elucidated. This review aims at describing the mutual relationships linking abnormal protein conformational transition and self-assembly into amyloid aggregates with membrane damage. A cross-correlated analysis of all these closely intertwined factors is thought to provide valuable insights for a comprehensive molecular description of amyloid diseases and, in turn, the design of effective therapies.

Proteostasis of Islet Amyloid Polypeptide: A Molecular Perspective of Risk Factors and Protective Strategies for Type II Diabetes

The possible link between hIAPP accumulation and β-cell death in diabetic patients has inspired numerous studies focusing on amyloid structures and aggregation pathways of this hormone. Recent studies have reported on the importance of early oligomeric intermediates, the many roles of their interactions with lipid membrane, pH, insulin, and zinc on the mechanism of aggregation of hIAPP. The challenges posed by the transient nature of amyloid oligomers, their structural heterogeneity, and the complex nature of their interaction with lipid membranes have resulted in the development of a wide range of biophysical and chemical approaches to characterize the aggregation process. While the cellular processes and factors activating hIAPP-mediated cytotoxicity are still not clear, it has recently been suggested that its impaired turnover and cellular processing by proteasome and autophagy may contribute significantly toward toxic hIAPP accumulation and, eventually, β-cell death. Therefore, studies focusing on the restoration of hIAPP proteostasis may represent a promising arena for the design of effective therapies. In this review we discuss the current knowledge of the structures and pathology associated with hIAPP self-assembly and point out the opportunities for therapy that a detailed biochemical, biophysical, and cellular understanding of its aggregation may unveil.

Formation of Uni-Lamellar Vesicles in Mixtures of DPPC with PEO-b-PCL Amphiphilic Diblock Copolymers

The ability of mixtures of 1.2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and the amphiphilic diblock copolymers poly (ethylene oxide)-block-poly(ε-caprolactone) (PEO-b-PCL) to stabilize uni-lamellar nano-vesicles is reported. Small angle neutron scattering (SANS) is used to define their size distribution and bilayer structure and resolve the copresence of aggregates and clusters in solution. The vesicles have a broad size distribution which is compatible with bilayer membranes of relatively low bending stiffness. Their mean diameter increases moderately with temperature and their number density and mass is higher in the case of the diblock copolymer with the larger hydrophobic block. Bayesian analysis is performed in order to justify the use of the particular SANS fitting model and confirm the reliability of the extracted parameters. This study shows that amphiphilic block copolymers can be effectively used to prepare mixed lipid-block copolymer vesicles with controlled lamellarity and a significant potential as nanocarriers for drug delivery.

Lamellarity and size distributions in mixed DPPC/amphiphilic poly(2-oxazoline) gradient copolymer vesicles and their temperature response

Mixed liposomes of dipalmitoylphosphatidylcholine (DPPC) and gradient (pseudodiblock) poly(2-methyl-2-oxazoline)-grad-poly(2-phenyl-2-oxazoline) (MPOx) copolymers are investigated by small angle neutron scattering (SANS). All experimental data, from different phospholipid-copolymer compositions, concentrations and temperatures are fitted with one model. This model allows the determination of the separate contributions from vesicular populations of different lamellarity and size. MPOx copolymers are proved to modify both the size and lamellarity of DPPC liposomes. The gradient copolymer with higher hydrophilic content induces shrinkage of the uni- and bi-lamellar DPPC vesicles. The copolymer with lower hydrophilic content causes dramatic changes on the lamellarity of DPPC vesicles by the formation of hexa-lamellar vesicles. The tendency of multi-lamellar vesicles to transform into uni-lamellar ones as temperature increases is more pronounced in the presence of the copolymers. These findings may have direct implications on the drug loading and release properties of liposomes and their interactions with cells.

Structure of supported DPPC/cholesterol bilayers studied via X-ray reflectivity

The electron density profile of bilayers of DPPC/cholesterol mixtures supported on semiconductor grade silicon substrates were studied with the objective of determining how the proximity of a solid interface modifies the phase diagram of mixed bilayers. The bilayers were studied in situ immersed in water via synchrotron X-ray reflectivity (XRR). Measurements were performed as a function of temperature through the main phase transition and cholesterol mole fractions up to 40%. Analysis of XRR yields the bilayer thickness, roughness and leaflet asymmetry. We find that the structure of the pure DPPC bilayers in the gel phase is in agreement with previous X-ray measurements of supported bilayers deposited via vesicle fusion and multilamellar vesicles but show more clearly defined features than measurements made on films formed using Langmuir-Blodget Langmuir-Shaffer (LB) deposition. Examination of bilayer thickness vs. temperature shows that the melting temperature for supported bilayers is shifted upwards by approximately 4 °C relative to multilamellar vesicles and that the melting temperature decreases with increasing cholesterol content up to 20%. For pure DPPC bilayers the leaflets melt in two stages with the distal leaflet melting first. For cholesterol concentrations of 10% and 20% there is no clear indication of separate melting. For 33% and 40% cholesterol content no clear transition is seen in the bilayer thickness, but an abrupt change in roughness indicates possible microdomain formation in the 40% cholesterol sample.

Preparation and Evaluation of Eudragit L100-PEG Proliponiosomes for Enhanced Oral Delivery of Celecoxib

PEGylated Eudragit L100 (ELP)-containing proliponiosomes (PLNs) were developed for improved oral delivery of celecoxib (CXB). The successful introduction of PEG 2000 or 5000 to Eudragit L100 (EL) was confirmed via proton nuclear magnetic resonance analysis of which calculated molar substitution ratio of PEG to EL was 36.0 or 36.7, respectively. CXB, ELP, phospholipid, and non-ionic surfactants were dissolved in dimethyl sulfoxide and lyophilized to produce CXB-loaded PLNs (CXB@PLNs). The physical state of CXB@PLNs was evaluated using differential scanning calorimetry and powder X-ray diffractometry, which revealed that crystalline CXB was transformed into amorphous form after the fabrication procedure. The reconstitution of CXB@PLNs in aqueous media generated CXB-loaded liponiosomes with nano-sized mean diameters and spherical morphology. CXB@PLNs displayed enhanced dissolution rate and permeability compared to CXB suspension. In vivo pharmacokinetic studies performed on rats demonstrated the improved oral bioavailability of CXB@PLNs compared to that of CXB suspension. No serious systemic toxicity was observed in the blood biochemistry tests performed on rats. These results suggest that the developed PLNs could be promising oral delivery systems for improving the bioavailability of poorly water-soluble drugs, such as CXB.

Hypericin photodynamic activity in DPPC liposomes - part II: stability and application in melanoma B16-F10 cancer cells

Hypericin (Hyp) is considered a promising photosensitizer for Photodynamic Therapy (PDT), due to its high hydrophobicity, affinity for cell membranes, low toxicity and high photooxidation activity. In this study, Hyp photophysical properties and photodynamic activity against melanoma B16-F10 cells were optimized using DPPC liposomes (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) as a drug delivery system. This nanoparticle is used as a cell membrane biomimetic model and solubilizes hydrophobic drugs. Hyp oxygen singlet lifetime (τ) in DPPC was approximately two-fold larger than that in P-123 micelles (Pluronic™ surfactants), reflecting a more hydrophobic environment provided by the DPPC liposome. On the other hand, singlet oxygen quantum yield values (Φ_Δ¹O₂) in DPPC and P-123 were similar; Hyp molecules were preserved as monomers. The Hyp/DPPC liposome aqueous dispersion was stable during fluorescence emission and the liposome diameter remained stable for at least five days at 30 °C. However, the liposomes collapsed after the lyophilization/rehydration process, which was resolved by adding the lyoprotectant Trehalose to the liposome dispersion before lyophilization. Cell viability of the Hyp/DPPC formulation was assessed against healthy HaCat cells and high-metastatic melanoma B16-F10 cells. Hyp incorporated into the DPPC carrier presented a higher selectivity index than the Hyp sample previously solubilized in ethanol under the illumination effect. Moreover, the IC₅₀ was lower for Hyp in DPPC than for Hyp pre-solubilized in ethanol. These results indicate the potential of the formulation of Hyp/DPPC for future biomedical applications in PDT treatment.

Characterization of phospholipid vesicles containing lauric acid: physicochemical basis for process and product development

Lauric acid (LAH) strongly inhibits the growth of acne-causing bacteria. LAH is essentially water-insoluble and the solubility of laurate (LA) salts are medium and temperature dependent. Hence, LAH/LA preparations are difficult to formulate. Here we fully characterized phospholipid vesicles containing up to 50 mol% LAH. Vesicles of dipalmitoylphosphatidylcholine (DPPC) containing LAH, at pHs 7.4 and 5.0, were characterized measuring size, charge, bilayer phase transition temperature (Tm) and permeability of water-soluble probes. Small angle X-ray scattering and cryotransmission electron microscopy showed multilamellar vesicles at low LAH %. Increasing LAH % had a negligible effect on particle size. An internal aqueous compartment in all vesicle's preparations, even at equimolar DPPC: LAH fractions, was demonstrated using water-soluble probes. At pH 5.0, the interaction between DPPC and LAH increased the Tm and phase transition cooperativity showing a single lipid phase formed by hydrogen-bonded DPPC: LAH complexes. At pH 7.4, vesicles containing 50 mol% LAH exhibited distinct phases, ascribed to complex formation between LAH and LA or LAH and DPPC. LAH incorporated in the vesicles minimally permeated a skin preparation at both pHs, indicating that the primary sites of LAH solubilization were the skin layers. These results provide the foundations for developing processes and products containing DPPC: LAH.

Simulation of fluid/gel phase equilibrium in lipid vesicles

Simulation of single component dipalmitoylphosphatidylcholine (DPPC) coarse-grained DRY-MARTINI lipid vesicles of diameter 10 nm (1350 lipids), 20 nm (5100 lipids) and 40 nm (17 600 lipids) is performed using statistical temperature molecular dynamics (STMD), to study finite size effects upon the order-disorder gel/fluid transition. STMD obtains enhanced sampling using a generalized ensemble, obtaining a flat energy distribution between upper and lower cutoffs, with little computational cost over canonical molecular dynamics. A single STMD trajectory of moderate length is sufficient to sample 20+ transition events, without trapping in the gel phase, and obtain well averaged properties. Phase transitions are analyzed via the energy-dependence of the statistical temperature, T_S(U). The transition temperature decreases with decreasing diameter, in agreement with experiment, and the transition changes from first order to borderline first-second order. The size- and layer-dependence of the structure of both stable phases, and of the pathway of the phase transition, are determined. It is argued that the finite size effects are primarily caused by the disruption of the gel packing by curvature. Inhomogeneous states with faceted gel patches connected by unusual fluid seams are observed at high curvature, with visually different structure in the inner and outer layers due to the different curvatures. Thus a simple physical picture describes phase transitions in nanoscale finite systems far from the thermodynamic limit.

Membrane deformation and layer-by-layer peeling of giant vesicles induced by the pore-forming toxin pneumolysin

Membranes under attack by the pore-forming toxin pneumolysin reveal a hitherto unknown layer-by-layer peeling mechanism and disclose the multilamellar structure.

Determination of the Main Phase Transition Temperature of Phospholipids by Nanoplasmonic Sensing

Our study demonstrates that nanoplasmonic sensing (NPS) can be utilized for the determination of the phase transition temperature (T_m) of phospholipids. During the phase transition, the lipid bilayer undergoes a conformational change. Therefore, it is presumed that the T_m of phospholipids can be determined by detecting conformational changes in liposomes. The studied lipids included 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), and 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC). Liposomes in gel phase are immobilized onto silicon dioxide sensors and the sensor cell temperature is increased until passing the T_m of the lipid. The results show that, when the system temperature approaches the T_m, a drop of the NPS signal is observed. The breakpoints in the temperatures are 22.5 °C, 41.0 °C, and 55.5 °C for DMPC, DPPC, and DSPC, respectively. These values are very close to the theoretical T_m values, i.e., 24 °C, 41.4 °C, and 55 °C for DMPC, DPPC, and DSPC, respectively. Our studies prove that the NPS methodology is a simple and valuable tool for the determination of the T_m of phospholipids.

Effect of chemical composition and sonication procedure on properties of food-grade soy lecithin liposomes with added glycerol

The effect of two-step and five-step acetone washing of soybean lecithin (SL) on compositional properties of partially purified phosphatidylcholines (PW2 and PW5) was studied. Trace amounts of protein were detected in SL, PW2 and PW5, with a predominance of glutamic acid and aspartic acid. Increasing the number of acetone washing steps significantly reduced the total content of γ-, δ- and α-tocopherol. Similar reductions (≈90%) of neutral lipids were found in both PW2 and PW5, but the removal of free fatty acids was higher in PW5 than in PW2 (78% vs. 71%). Linoleic acid was the main constituent in both the neutral lipids and the phospholipid fractions of SL, PW2 and PW5, accounting for around 53-59% of total fatty acids; however, a considerable amount of it was removed by increasing the number of washing steps. All phospholipid classes were mostly concentrated in the first two-step washing of lecithin. Further washing increased the concentration of phosphatidylcholine (PC) in PW5, as compared to PW2. Glycerol-containing liposomes from PW2 and PW5 were produced using two different-intensity sonication procedures (method A: 120W, 5min; method B: 30W, 2min) using a probe-type sonicator (100mL volume suspension). Liposomes of soy lecithin and liposomes of PW5 without glycerol were also obtained by using strong sonication (method A). The liposomal dispersion with the highest purification and the stronger sonication was clearly distinguished from the others, both in particle size and in zeta potential. DSC results showed noticeable interference of glycerol in the membrane structure, but minimal changes in particle size and surface charge.

Nanoviscosity Measurements Revealing Domain Formation in Biomimetic Membranes

Partitioning of lipid molecules in biomimetic membranes is a model system for the study of naturally occurring domains, such as rafts, in biological membranes. The existence of nanometer scale membrane domains in binary lipid mixtures has been shown with microscopy methods; however, the nature of these domains has not been established unequivocally. A common notion is to ascribe domain separation to thermodynamic phase equilibria. However, characterizing thermodynamic phases of single bilayer membranes has not been possible due to their extreme dimensions: the size of the domains falls to the order of tens to hundreds of nanometers whereas the membrane thickness is only a few nanometers. Here, we present direct measurements of phase transitions in single bilayers of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)/1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) phospholipid mixtures using quartz crystal microbalance-based nanoviscosity measurements. Coexisting thermodynamic phases have been successfully identified, and a phase diagram was constructed for the single bilayer binary lipid system. It was demonstrated that domain separation only takes place in planar membranes, and thus, it is absent in liposomes and not detectable in calorimetric measurements on liposome suspensions. On the basis of energetic analysis, the main transition was identified as the breaking of van der Waals interactions between the acyl chains.

Modulation of cellulase activity by charged lipid bilayers with different acyl chain properties for efficient hydrolysis of ionic liquid-pretreated cellulose

The stability of cellulase activity in the presence of ionic liquids (ILs) is critical for the enzymatic hydrolysis of insoluble cellulose pretreated with ILs. In this work, cellulase was incorporated in the liposomes composed of negatively charged 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) and zwitterionic phosphatidylcholines (PCs) with different length and degree of unsaturation of the acyl chains. The liposomal cellulase-catalyzed reaction was performed at 45°C in the acetate buffer solution (pH 4.8) with 2.0g/L CC31 as cellulosic substrate. The crystallinity of CC31 was reduced by treating with 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) at 120°C for 30min. The liposomal cellulase continuously catalyzed hydrolysis of the pretreated CC31 for 48h producing glucose in the presence of 15wt% [Bmim]Cl. The charged lipid membranes were interactive with [Bmim](+), as elucidated by the [Bmim]Cl-induced alterations in fluorescence polarization of the membrane-embedded 1,6-diphenyl-1,3,5-hexatriene (DPH) molecules. The charged membranes offered the microenvironment where inhibitory effects of [Bmim]Cl on the cellulase activity was relieved. The maximum glucose productivity GP of 10.8 mmol-glucose/(hmol-lipid) was obtained at the reaction time of 48h with the cellulase incorporated in the liposomes ([lipid]=5.0mM) composed of 50mol% POPG and 1,2-dilauroyl-sn-glycero-3-phosohocholine (DLPC) with relatively short and saturated acyl chains.

A liposome-based size calibration method for measuring microvesicles by flow cytometry

ESSENTIALS: A gold standard to determine the sizes of microvesicles by flow cytometry is needed. We used fluorescently labeled liposomes to estimate the size of microvesicles with flow cytometry. We suggest that liposomes are more accurate size calibrators than the commonly used polystyrene beads. The liposome-based size calibrators improve the size assessment of microvesicle made with flow cytometry.

BACKGROUND

During the past years, the need for a gold standard to determine the sizes of extracellular vesicles including microvesicles by flow cytometry has been emphasized.

METHODS

This work suggests that artificial vesicles can be used as calibrators to estimate the size of microvesicles from the side scattering (SSC) measured with flow cytometry. We prepared fluorescently labeled liposomes with different maximum sizes defined by the pore size (200, 400, 800, and 1000 nm) of the membrane used for the extrusion. The fluorescence strengths from the largest liposomes pertaining to each pore size enabled us to verify the correlation between the SSC from a liposome and the corresponding size.

CONCLUSIONS

This study indicates that artificial vesicles are more accurate size calibrators compared to the commonly used polystyrene calibrator beads illustrated by the SSC from 110 nm polystyrene beads corresponds to the scattering from ~400 nm vesicle-like particles. We also show that this method of size assessment based on SSC has a low resolution that is roughly estimated to be between 60 and 200 nm, dependent on the vesicle size.

Nanoparticle-supported lipid bilayers as an in situ remediation strategy for hydrophobic organic contaminants in soils

Polycyclic aromatic hydrocarbons (PAHs) are persistent environmental organic contaminants due to their low water solubility and strong sorption onto organic/mineral surfaces. Here, nanoparticle-supported lipid bilayers (NP-SLBs) made of 100-nm SiO2 nanoparticles and the zwitterionic lipid 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) are investigated as constructs for removing PAHs from contaminated sites, using benzo[a]pyrene (BaP) as an example. DMPC in the form of small unilamellar vesicles (SUVs) or DMPC-NP-SLBs with excess DMPC-SUVs to support colloidal stability, when added to saturated BaP solutions, sorb BaP in ratios of up to 10/1 to 5/1 lipid/BaP, over a 2-week period at 33 °C. This rate increases with temperature. The presence of humic acid (HA), as an analog of soil organic matter, does not affect the BaP uptake rate by DMPC-NP-SLBs and DMPC-SUVs, indicating preferential BaP sorption into the hydrophobic lipids. HA increases the zeta potential of these nanosystems, but does not disrupt their morphology, and enhances their colloidal stability. Studies with the common soil bacteria Pseudomonas aeruginosa demonstrate viability and growth using DMPC-NP-SLBs and DMPC-SUVs, with and without BaP, as their sole carbon source. Thus, NP-SLBs may be an effective method for remediation of PAHs, where the lipids provide both the method of extraction and stability for transport to the contaminant site.