Dynamic hydrostatic pressure promotes differentiation of human dental pulp stem cells

Immunolocalization of the mechanogated ion channels PIEZO1 and PIEZO2 in human and mouse dental pulp and periodontal ligament

PIEZO1 and PIEZO2 are essential components of mechanogated ion channels, which are required for mechanotransduction and biological processes associated with mechanical stimuli. There is evidence for the presence of PIEZO1 and PIEZO2 in teeth and periodontal ligaments, especially in cell lines and mice, but human studies are almost nonexistent. Decalcified permanent human teeth and mouse molars were processed for immunohistochemical detection of PIEZO1 and PIEZO2. Confocal laser microscopy was used to examine the co-localization of PIEZO 1 and PIEZO2 with vimentin (a marker of differentiated odontoblasts) in human teeth. In the outer layer of the human dental pulp, abundant PIEZO1- and PIEZO2-positive cells were found that had no odontoblast morphology and were vimentin-negative. Based on their morphology, location, and the absence of vimentin positivity, they were identified as dental pulp stem cells or pre-odontoblasts. However, in mice, PIEZO1 and PIEZO2 were ubiquitously detected and colocalized in odontoblasts. Intense immunoreactivity of PIEZO1 and PIEZO2 has been observed in human and murine periodontal ligaments. Our findings suggest that PIEZO1 and PIEZO2 may be mechanosensors/mechanotransducers in murine odontoblasts, as well as in the transmission of forces by the periodontal ligament in humans and mice.

Chitosan-Calcium Aluminate as a Cell-homing Scaffold: Its Bioactivity Testing in a Microphysiological Dental Pulp Platform

In vitro models of the dental pulp microenvironment have been proposed for the assessment of biomaterials, to minimise animal use in operative dentistry. In this study, a scaffold/3-D dental pulp cell culture interface was created in a microchip, under simulated dental pulp pressure, to evaluate the cell-homing potential of a chitosan (CH) scaffold functionalised with calcium aluminate (the 'CHAlCa scaffold'). This microphysiological platform was cultured at a pressure of 15 cm H2O for up to 14 days; cell viability, migration and odontoblastic differentiation were then assessed. The CHAlCa scaffold exhibited intense chemotactic potential, causing cells to migrate from the 3-D culture to its surface, followed by infiltration into the macroporous structure of the scaffold. By contrast, the cells in the presence of the non-functionalised chitosan scaffold showed low cell migration and no cell infiltration. CHAlCa scaffold bioactivity was confirmed in dentin sialophosphoprotein-positive migrating cells, and odontoblastic markers were upregulated in 3-D culture. Finally, in situ mineralised matrix deposition by the cells was confirmed in an Alizarin Red-based assay, in which the CHAlCa and CH scaffolds were adapted to fit within dentin discs. More intense deposition of matrix was observed with the CHAlCa scaffold, as compared to the CH scaffold. In summary, we present an in vitro platform that provides a simple and reproducible model for selecting and developing innovative biomaterials through the assessment of their cell-homing potential. By using this platform, it was shown that the combination of calcium aluminate and chitosan has potential as an inductive biomaterial that can mediate dentin tissue regeneration during cell-homing therapies.

Mechanobiology of Dental Pulp Cells

The dental pulp is the inner part of the tooth responsible for properly functioning during its lifespan. Apart from the very big biological heterogeneity of dental cells, tooth microenvironments differ a lot in the context of mechanical properties-ranging from 5.5 kPa for dental pulp to around 100 GPa for dentin and enamel. This physical heterogeneity and complexity plays a key role in tooth physiology and in turn, is a great target for a variety of therapeutic approaches. First of all, physical mechanisms are crucial for the pain propagation process from the tooth surface to the nerves inside the dental pulp. On the other hand, the modulation of the physical environment affects the functioning of dental pulp cells and thus is important for regenerative medicine. In the present review, we describe the physiological significance of biomechanical processes in the physiology and pathology of dental pulp. Moreover, we couple those phenomena with recent advances in the fields of bioengineering and pharmacology aiming to control the functioning of dental pulp cells, reduce pain, and enhance the differentiation of dental cells into desired lineages. The reviewed literature shows great progress in the topic of bioengineering of dental pulp-although mainly in vitro. Apart from a few positions, it leaves a gap for necessary filling with studies providing the mechanisms of the mechanical control of dental pulp functioning in vivo.

Investigation of osteogenesis and angiogenesis in perfusion bioreactors using improved multi-layer PCL-nHA-nZnO electrospun scaffolds

PURPOSE

Bone tissue engineering aims to create a three-dimensional, matured, angiogenic scaffold with a suitable thickness that resembles a natural bone matrix. On the other hand, electrospun fibers, which researchers have considered due to their good biomimetic properties, are considered 2D structures. Due to the highly interwoven network and small pore size, achieving the desired thickness for bone lesions has always been challenging. In bone tissue engineering, bioreactors are crucial for achieving initial tissue maturity and introducing certain signals as flow parameters for differentiation.

METHODS

In the present study, Human bone marrow mesenchymal stem cells (hBMSCs) and human umbilical vein endothelial cells (HUVECs) were co-cultured in a perfusion bioreactor on treated (improved pore size by gelatin sacrification and subsequent ultrasonication) 5-layer polycaprolactone-nano hydroxyapatite-nano zinc oxide (T-PHZ) scaffolds to investigate osteogenesis and angiogenesis simultaneously. The flow parameters and stresses on the cells were studied using two patterns of parallel and vertical scaffolds relative to the flow of the culture medium. In dynamic vertical flow (DVF), the culture medium flows perpendicular to the scaffolds, and in dynamic parallel flow (DPF), the culture medium flows parallel to the scaffolds. In all evaluations, static samples (S) served as the control group.

RESULTS

Live/dead, and MTT assays demonstrated the biocompatibility of the 5-layer scaffolds and the suitability of the bioreactor's functional conditions. ALP activity, EDAX analysis, and calcium content measurements exhibited greater osteogenesis for T-PHZ scaffolds in DVF conditions. Calcium content increased by a factor of 2.2, 1.8, and 1.6 during days 7 to 14 of culture under DVF, DPF and S conditions, respectively. After 21 days of co-culturing, an immunohistochemistry (IHC) test was performed to investigate angiogenesis and osteogenesis. Five antibodies were investigated in DVF, CD31, VEGFA, and VEGFR2 for angiogenesis, osteocalcin, and RUNX2 for osteogenesis. Compressive stress applied in DVF mode has increased osteogenic activity compared to DPF.

CONCLUSION

The results indicated the development of ideal systems for osteogenesis and angiogenesis on the treated multilayer electrospun scaffolds in the perfusion bioreactor.

Endodontic-orthodontic interactions: a review and treatment recommendations

The literature is replete with articles describing the many and varied interactions between endodontic treatment and orthodontic tooth movement (OTM), often reporting conflicting views and findings, which creates confusion for clinicians. Original research and review articles have described aspects such as apical root resorption and potential pulpal complications of teeth related to OTM. Some interactions are of relatively minor clinical significance, whilst others may have adverse consequences. A history of dental trauma before or during OTM further complicates the interactions. This review re-assesses the historical literature on endodontic-orthodontic interactions in light of more recent research and presents guidelines for managing clinical situations involving both disciplines. © 2023 Australian Dental Association.

Mechanical force regulates root resorption in rats through RANKL and OPG

Background

External root resorption is one of common complications of orthodontic treatment, while internal root resorption is rarely observed, and the difference between pulp and periodontal tissues during orthodontic treatment is still unknown. The purpose of this study was to evaluate the effects of orthodontic forces on histological and cellular changes of the dental pulp and periodontal tissues.

Methods

Orthodontic tooth movement model was established in Forty-eight adult male Wistar rats. The distance of orthodontic tooth movement was quantitatively analyzed. The histological changes of pulp and periodontal tissues were performed by hematoxylin–eosin staining, tartrate-resistant acid phosphate staining was used to analyze the changes of osteoclast number, immunohistochemistry analysis and reverse transcription polymerase chain reaction were used to examine the receptor of nuclear factor-κB ligand (RANKL) and osteoprotegerin (OPG) expression. The width of tertiary dentine was quantitatively analyzed. Tartrate-resistant acid phosphate staining and the erosion area of osteo assay surface plate was used to evaluate osteoclast activity.

Results

The orthodontic tooth movement distance increased in a force dependent manner, and reached the peak value when orthodontic force is 60 g. Heavy orthodontic force increased the RANKL expression of periodontal ligament srem cells (PDLSCs) which further activated osteoclasts and resulted in external root resorption, while the RANKL expression of dental pulp stem cells (DPSCs) was relatively low to activate osteoclasts and result in internal root resorption, and the dental pulp tend to form tertiary dentine under orthodontic force stimulation.

Conclusions

Heavy orthodontic forces activated osteoclasts and triggered external root resorption by upregulating RANKL expression in rat periodontal tissues, while there was no significant change of RANKL expression in dental pulp tissue under heavy orthodontic forces, which prevented osteoclast activation and internal root resorption.

Effects of mechanical force on proliferation and apoptosis of stem cells from human exfoliated deciduous teeth

OBJECTIVES

This study was designed to explore the effects of mechanical force on the proliferation, apoptosis, and morphology of stem cells from human exfoliated deciduous tooth pulp (SHEDs).

MATERIALS AND METHODS

Caries-free stranded deciduous teeth were extracted, and SHEDs were isolated through enzymatic digestion. The cultured SHEDs were subjected to different levels of mechanical stimuli (0, 100, 200, and 300 g) for 7 days (30 min/day) using external centrifugal force. Cell proliferation was evaluated with the CCK-8 assay, and the cell cycle and apoptosis were assessed by flow cytometry. The cell morphology was examined using transmission electron microscopy.

RESULTS

Cell proliferation assay showed no differences between the three stimulation groups and the control group in day 1 to day 3. From the 4th day, cell proliferation was significantly lower in the mechanical force groups than in the control group, but no significant difference was observed among the three mechanical force groups. Besides, there was no significant difference in cell apoptosis among the four groups for 7 days. On day 7 after stimulation, the SHEDs were shrunken, with significantly increased isochromosome in the nucleus and an increase in lysosomes.

CONCLUSIONS

Mechanical force can inhibit the proliferation and affect morphology of SHEDs, but it has no effect on cell apoptosis.

CLINICAL RELEVANCE

Mechanical force stimulation significantly inhibited cell proliferation of SHEDs. Mechanical force stimulation had no significant effect on cell apoptosis of SHEDs. The morphology and ultrastructure of SHEDs changed after mechanical force stimulation.

Screening of differentially expressed miRNAs during osteogenic/odontogenic differentiation of human dental pulp stem cells exposed to mechanical stress

MicroRNAs (miRNAs) have been demonstrated as crucial transcriptional regulators in proliferation, differentiation, and tumorigenesis. The comprehensive miRNA profiles of osteogenic/odontogenic differentiation of human dental pulp stem cells (hDPSCs) under the condition of mechanical stress remains largely unknown. In this study, we aimed to discover the miRNA expression profiles of hDPSCs exposed to mechanical stress under the osteogenic/odontogenic process. We found that mechanical stress (0.09 MPa and 0.18 MPa, respectively, 30 min/day) significantly promoted the proliferation of hDPSCs since the fifth day. The expressions of DSPP, DMP1, and RUNX2 were significantly increased on day 7 in the presence of 0.09 MPa and 0.18 MPa mechanical stress. On day 14, the expression levels of DSPP, DMP1, and RUNX2 were decreased in the presence of mechanical stress. Among 2578 expressed miRNAs, 5 miRNAs were upregulated and 3 miRNAs were downregulated. Six hub target genes were merged in protein-protein interactions (PPI) network analysis, in which existed only one sub-network. Bioinformatics analysis identified an array of affected signaling pathways involved in the development of epithelial and endothelial cells, cell-cell junction assembly, Rap1 signaling pathway, regulation of actin cytoskeleton, and MAPK signaling pathway. Our results revealed the miRNA expression profiles of osteogenic/odontogenic differentiation of hDPSCs under mechanical stress and identified eight miRNAs that were differentially expressed in response to the mechanical stress. Bioinformatics analysis also showed that various signaling pathways were affected by mechanical stress.

The colocalizations of pulp neural stem cells markers with dentin matrix protein-1, dentin sialoprotein and dentin phosphoprotein in human denticle (pulp stone) lining cells

BACKGROUND

The primary dentin, secondary dentin, and reactive tertiary dentin are formed by terminal differentiated odontoblasts, whereas atubular reparative tertiary dentin is formed by odontoblast-like cells. Odontoblast-like cells differentiate from pulpal stem cells, which express the neural stem cell markers nestin, S100β, Sox10, and P0. The denticle (pulp stone) is an unique mineralized extracellular matrix that frequently occurs in association with the neurovascular structures in the dental pulp. However, to date, the cellular origin of denticles in human dental pulp is unclear. In addition, the non-collagenous extracellular dentin matrix proteins dentin matrix protein 1 (DMP1), dentin sialoprotein (DSP), and dentin phosphoprotein (DPP) have been well characterized in the dentin matrix, whereas their role in the formation and mineralization of the denticle matrix remains to be clarified.

METHODS

To characterize the formation of denticle, healthy human third molars (n = 59) were completely sectioned and evaluated by HE staining in different layers at 720 µm intervals. From these samples, molars with (n = 5) and without denticles (n = 8) were selected. Using consecutive cryo-sections from a layer containing denticles of different sizes, we examined DMP1, DSP, and DPP in denticle lining cells and tested their co-localizations with the glial stem cell markers nestin, S100β, Sox10, and P0 by quantitative and double staining methods.

RESULTS

DMP1, DSP and DPP were found in odontoblasts, whereas denticle lining cells were positive only for DMP1 and DSP but not for DPP. Nestin was detected in both odontoblasts and denticle lining cells. S100β, Sox10, and P0 were co-localized with DMP1 and DSP in different subpopulations of denticle lining cells.

CONCLUSIONS

The co-localization of S100β, Sox10, and P0 with DMP1 and DSP in denticle lining cells suggest that denticle lining cells are originated from glial and/or endoneurial mesenchymal stem cells which are involved in biomineralization of denticle matrix by secretion of DMP1 and DSP. Since denticles are atubular compared to primary, secondary, reactionary tertiary dentin and denticle formed by odontoblasts, our results suggest that DPP could be one of the proteins involved in the complex regulation of dentinal tubule formation.

Mechanical loading and the control of stem cell behavior

OBJECTIVE

Mechanical stimulation regulates many cell responses. The present study describes the effects of different in vitro mechanical stimulation approaches on stem cell behavior.

DESIGN

The narrative review approach was performed. The articles published in English language that addressed the effects of mechanical force on stem cells were searched on Pubmed and Scopus database. The effects of extrinsic mechanical force on stem cell response was reviewed and discussed.

RESULTS

Cells sense mechanical stimuli by the function of mechanoreceptors and further transduce force stimulation into intracellular signaling. Cell responses to mechanical stimuli depend on several factors including type, magnitude, and duration. Further, similar mechanical stimuli exhibit distinct cell responses based on numerous factors including cell type and differentiation stage. Various mechanical applications modulate stemness maintenance and cell differentiation toward specific lineages.

CONCLUSIONS

Mechanical force application modulates stemness maintenance and differentiation. Modification of force regimens could be utilized to precisely control appropriate stem cell behavior toward specific applications.

Biomechanical studies on biomaterial degradation and co-cultured cells: mechanisms, potential applications, challenges and prospects

This review provides a comprehensive overview of biomechanical studies on biomaterial degradation and co-cultured cells as well as valuable biomechanical ideas on how to design or optimize cell biomaterial co-culture system.

Dental Pulp Stem Cell Mechanoresponsiveness: Effects of Mechanical Stimuli on Dental Pulp Stem Cell Behavior

Dental pulp is known to be an accessible and important source of multipotent mesenchymal progenitor cells termed dental pulp stem cells (DPSCs). DPSCs can differentiate into odontoblast-like cells and maintain pulp homeostasis by the formation of new dentin which protects the underlying pulp. DPSCs similar to other mesenchymal stem cells (MSCs) reside in a niche, a complex microenvironment consisting of an extracellular matrix, other local cell types and biochemical stimuli that influence the decision between stem cell (SC) self-renewal and differentiation. In addition to biochemical factors, mechanical factors are increasingly recognized as key regulators in DPSC behavior and function. Thus, microenvironments can significantly influence the role and differentiation of DPSCs through a combination of factors which are biochemical, biomechanical and biophysical in nature. Under in vitro conditions, it has been shown that DPSCs are sensitive to different types of force, such as uniaxial mechanical stretch, cyclic tensile strain, pulsating fluid flow, low-intensity pulsed ultrasound as well as being responsive to biomechanical cues presented in the form of micro- and nano-scale surface topographies. To understand how DPSCs sense and respond to the mechanics of their microenvironments, it is essential to determine how these cells convert mechanical and physical stimuli into function, including lineage specification. This review therefore covers some aspects of DPSC mechanoresponsivity with an emphasis on the factors that influence their behavior. An in-depth understanding of the physical environment that influence DPSC fate is necessary to improve the outcome of their therapeutic application for tissue regeneration.

Mineral trioxide aggregate affects cell viability and induces apoptosis of stem cells from human exfoliated deciduous teeth

BACKGROUND

Mineral trioxide aggregate (MTA) is widely used for pulp-capping procedures in permanent teeth and as a gold standard material in endodontics. The aim of the study was to investigate the effect of MTA on cell viability and apoptosis when MTA is directly in contact with Stem Cells from Human Exfoliated Deciduous Teeth (SHEDs).

METHODS

MTA was mixed and coated in the bottom of a 24-well plate. SHEDs collected and cultured from normal exfoliated human deciduous teeth (passages 3-4) were seeded on square cover glasses. The glasses with seeded SHEDs were incubated in the plates with or without MTA coating. They were divided into four groups: MTA direct contact, direct control, MTA indirect contact, and indirect control. After 1, 2 and 3 days of culturing, cell morphology was observed and cell viability was assessed by the WST-1 cell cytotoxicity assay. TUNEL assay, immunofluorescent labeling and western blot analysis were used to study the effects of MTA on SHEDs apoptosis.

RESULTS

MTA impaired cell viability of SHEDs in 1, 2 and 3 days, and the effect of direct contact was more severe. Cell apoptosis with positive Annexin V and TUNEL staining was noted when there was direct contact with MTA. Western blot analysis revealed that Bcl-2 and Bcl-xL decreased after SHEDs were in contact with MTA.

CONCLUSIONS

This study shows that direct contact with 1 week post-set MTA significantly decreases the viability of SHEDs and induced cell apoptosis. The results suggest that there is a possible cytotoxic effect of pulp tissue when there is direct contact with MTA. Different responses would be expected due to the strong alkaline characteristics of fresh mixed MTA.

Effect of cyclic uniaxial compressive stress on human dental pulp cells in vitro

PURPOSE

Teeth are exposed to various forces during functional and parafunctional movements. These processes inevitably affect the dental pulp, and the mechanism of these influences has been the subject of many previous studies using different apparatuses and obtaining different results. In this study, we aimed to investigate the effects of compressive stress on the proliferation and differentiation of human dental pulp cells (hDPCs).

MATERIALS AND METHODS

A four-point bending strain system was adopted to apply low-density cyclic uniaxial compressive stress (2000 microstrain, 0.5 Hz) to hDPCs for 1.5, 3, 6, 12, and 24 h. The cell cycle progression and mRNA expression of differentiation-related genes (BMP2, ALP, DMP1, DSPP, COL I) were then examined to investigate the proliferation and differentiation of hDPCs.

RESULTS

The results showed that cyclic compressive stress changed the morphology of hDPCs after 12 and 24 h of mechanical loading; cell cycle progression was promoted, especially in the 24-h group (p < 0.05). The expression of BMP2 was significantly upregulated after 3 and 6 h of mechanical loading but declined in the 12- and 24-h groups, whereas the expression levels of DMP1 and DSPP were significantly upregulated in the 12- and 24-h loading groups (p < 0.05).

CONCLUSIONS

Dental pulp cells were sensitive to compressive stress, especially after 12 and 24 h of applied force. Proliferation and odontogenic differentiation were significantly promoted in this in vitro model.

Dental pulp stem cells for bone tissue engineering: a review of the current literature and a look to the future

The aim of this narrative review is to investigate the implication of mesenchymal stem cells harvested from human dental pulp in in vivo bone tissue regeneration. We focused on studies related to roles of human dental pulp stem cells in in vivo bone regeneration. A total of 1021 studies were identified; after the assessment of eligibility, only 39 studies were included in the review. The evaluated information of the studies regards the experimental strategies (e.g., the isolation method, the scaffold, the in vivo animal models). The overall main evidences highlighted from the analysis are that dental pulp stem cells and human-exfoliated deciduous teeth stem cells supported by a suitable scaffold should be considered a valuable source for bone tissue regeneration.

Dental pulp stem cells for bone tissue engineering: a review of the current literature and a look to the future

The aim of this narrative review is to investigate the implication of mesenchymal stem cells harvested from human dental pulp in in vivo bone tissue regeneration. We focused on studies related to roles of human dental pulp stem cells in in vivo bone regeneration. A total of 1021 studies were identified; after the assessment of eligibility, only 39 studies were included in the review. The evaluated information of the studies regards the experimental strategies (e.g., the isolation method, the scaffold, the in vivo animal models). The overall main evidences highlighted from the analysis are that dental pulp stem cells and human-exfoliated deciduous teeth stem cells supported by a suitable scaffold should be considered a valuable source for bone tissue regeneration.

Physical forces modulate cell differentiation and proliferation processes

Currently, the predominant hypothesis explains cellular differentiation and behaviour as an essentially genetically driven intracellular process, suggesting a gene-centrism paradigm. However, although many living species genetic has now been described, there is still a large gap between the genetic information interpretation and cell behaviour prediction. Indeed, the physical mechanisms underlying the cell differentiation and proliferation, which are now known or suspected to guide such as the flow of energy through cells and tissues, have been often overlooked. We thus here propose a complementary conceptual framework towards the development of an energy-oriented classification of cell properties, that is, a mitochondria-centrism hypothesis based on physical forces-driven principles. A literature review on the physical-biological interactions in a number of various biological processes is analysed from the point of view of the fluid and solid mechanics, electricity and thermodynamics. There is consistent evidence that physical forces control cell proliferation and differentiation. We propose that physical forces interfere with the cell metabolism mostly at the level of the mitochondria, which in turn control gene expression. The present perspective points towards a paradigm shift complement in biology.

The Alpha 7 Nicotinic Acetylcholine Receptor of Deciduous Dental Pulp Stem Cells Regulates Osteoclastogenesis During Physiological Root Resorption

The physiological root resorption of deciduous teeth is a normal phenomenon, but the mechanisms underlying this process are still unclear. In this study, deciduous dental pulp stem cells (DDPSCs) and permanent dental pulp stem cells (DPSCs) were derived from deciduous teeth and normal permanent teeth at different stages of resorption. In the middle stage of root resorption, DDPSCs exhibited an increase in the ability to induce osteoclast differentiation. Activation of the alpha 7 nicotinic acetylcholine receptor (α7 nAChR) by secretory mammalian Ly-6 urokinase-type plasminogen activator receptor-associated protein 1 (SLURP-1) caused a significant increase in the expression levels of NF-κB, receptor activator of nuclear factor-kappa B ligand (RANKL), and the ratio of RANKL/osteoprotegerin (OPG). These effects were inhibited by alpha-bungarotoxin (α-BTX). Furthermore, the expression levels of RANKL/OPG were significantly reduced following inhibition of NF-κB. High-strength, dynamic positive pressure increased the expression of SLURP-1 and α7 nAChR in DDPSCs in the stable stage. These data indicated that mechanical stress stimulated the expression of SLURP-1 and α7 nAChR in DDPSCs. Additionally, SLURP-1 activated α7 nAChR, thereby upregulating the expression of NF-κB and enhancing its activity, thus regulating RANKL/OPG expression and affecting the ability of DDPSCs to influence osteoclastogenesis, which likely enhances root resorption and leads to the physiological loss of deciduous teeth.

Ultrasound Stimulation of Different Dental Stem Cell Populations: Role of Mitogen-activated Protein Kinase Signaling

INTRODUCTION

Mesenchymal stem cells (MSCs) from dental tissues may respond to low-intensity pulsed ultrasound (LIPUS) treatment, potentially providing a therapeutic approach to promoting dental tissue regeneration. This work aimed to compare LIPUS effects on the proliferation and MAPK signaling in MSCs from rodent dental pulp stem cells (DPSCs) compared with MSCs from periodontal ligament stem cells (PDLSCs) and bone marrow stem cells (BMSCs).

METHODS

Isolated MSCs were treated with 1-MHz LIPUS at an intensity of 250 or 750 mW/cm2 for 5 or 20 minutes. Cell proliferation was evaluated by 5-bromo-2-deoxyuridine (BrdU) staining after 24 hours of culture following a single LIPUS treatment. Specific ELISAs were used to determine the total and activated p38, ERK1/2, and JNK MAPK signaling proteins up to 4 hours after treatment. Selective MAPK inhibitors PD98059 (ERK1/2), SB203580 (p38), and SP600125 (JNK) were used to determine the role of activation of the particular MAPK pathways.

RESULTS

The proliferation of all MSC types was significantly increased after LIPUS treatment. LIPUS at a 750-mW/cm2 dose induced the greatest effects on DPSCs. BMSC proliferation was stimulated in equal measures by both intensities, whereas 250 mW/cm2 LIPUS exposure exerted maximum effects on PDLSCs. ERK1/2 was activated immediately in DPSCs after treatment. Concomitantly, DPSC proliferation was specifically modulated by ERK1/2 inhibition, whereas p38 and JNK inhibition exerted no effects. In BMSCs, JNK MAPK signaling was LIPUS activated, and the increase in proliferation was blocked by specific inhibition of the JNK pathway. In PDLSCs, JNK MAPK signaling was activated immediately after LIPUS, whereas p-p38 MAPK increased significantly in these cells 4 hours after exposure. Correspondingly, JNK and p38 inhibition modulated LIPUS-stimulated PDLSC proliferation.

CONCLUSIONS

LIPUS promoted MSC proliferation in an intensity and cell-specific dependent manner via activation of distinct MAPK pathways.

Influence of the mechanical environment on the engineering of mineralised tissues using human dental pulp stem cells and silk fibroin scaffolds

Teeth constitute a promising source of stem cells that can be used for tissue engineering and regenerative medicine purposes. Bone loss in the craniofacial complex due to pathological conditions and severe injuries could be treated with new materials combined with human dental pulp stem cells (hDPSCs) that have the same embryonic origin as craniofacial bones. Optimising combinations of scaffolds, cells, growth factors and culture conditions still remains a great challenge. In the present study, we evaluate the mineralisation potential of hDPSCs seeded on porous silk fibroin scaffolds in a mechanically dynamic environment provided by spinner flask bioreactors. Cell-seeded scaffolds were cultured in either standard or osteogenic media in both static and dynamic conditions for 47 days. Histological analysis and micro-computed tomography of the samples showed low levels of mineralisation when samples were cultured in static conditions (0.16±0.1 BV/TV%), while their culture in a dynamic environment with osteogenic medium and weekly µCT scans (4.9±1.6 BV/TV%) significantly increased the formation of homogeneously mineralised structures, which was also confirmed by the elevated calcium levels (4.5±1.0 vs. 8.8±1.7 mg/mL). Molecular analysis of the samples showed that the expression of tooth correlated genes such as Dentin Sialophosphoprotein and Nestin were downregulated by a factor of 6.7 and 7.4, respectively, in hDPSCs when cultured in presence of osteogenic medium. This finding indicates that hDPSCs are able to adopt a non-dental identity by changing the culture conditions only. Also an increased expression of Osteocalcin (1.4x) and Collagen type I (1.7x) was found after culture under mechanically dynamic conditions in control medium. In conclusion, the combination of hDPSCs and silk scaffolds cultured under mechanical loading in spinner flask bioreactors could offer a novel and promising approach for bone tissue engineering where appropriate and rapid bone regeneration in mechanically loaded tissues is required.

Single-cell RT-PCR and immunocytochemical detection of mechanosensitive transient receptor potential channels in acutely isolated rat odontoblasts

OBJECTIVE

Hydrostatic force applied to tooth pulp has long been suspected to be the direct cause of dental pain. However, the molecular and cellular identity of the transducer of the mechanical force in teeth is not clear. Growing number of literatures suggested that odontoblasts, secondary to its primary role as formation of tooth structure, might function as a cellular mechanical transducer in teeth.

DESIGN

In order to determine whether odontoblasts could play a crucial role in transduction of hydrostatic force applied to dental pulp into electrical impulses, current study investigated the expression of stretch-activated transient receptor potential (TRP) channels in acutely isolated odontoblasts from adult rats by single cell reverse transcriptase polymerase chain reaction and immunocytochemical analysis.

RESULTS

As the result, expression of TRPM7 (melastatin 7) was observed in majority (87%) of odontoblasts while mRNAs for TRPC1 (canonical 1), TRPC6 (canonical 6) and TRPV4 (vanilloid 4) were detected in small subpopulations of odontoblasts. TRPM3 (melastatin 3) was not detected in our experimental set-up. Immunocytochemical analysis further revealed TRPM7 expression at protein level.

CONCLUSION

Expression of the mechanosensitive TRP channels provides additional evidence that supports the sensory roles of odontoblasts. Given that TRPM7 is a mechanosensitive ion channel with a kinase activity that plays a role in Mg(2+) homeostasis, it is possible that TRPM7 expressed in odontoblasts might play a central role in mineralization during dentin formation.

The effect of mechanical loading on osteogenesis of human dental pulp stromal cells in a novel in vitro model

Tooth loss often results in alveolar bone resorption because of lack of mechanical stimulation. Thus, the mechanism of mechanical loading on stem cell osteogenesis is crucial for alveolar bone regeneration. We have investigated the effect of mechanical loading on osteogenesis in human dental pulp stromal cells (hDPSCs) in a novel in vitro model. Briefly, 1 × 10(7) hDPSCs were seeded into 1 ml 3% agarose gel in a 48-well-plate. A loading tube was then placed in the middle of the gel to mimic tooth-chewing movement (1 Hz, 3 × 30 min per day, n = 3). A non-loading group was used as a control. At various time points, the distribution of live/dead cells within the gel was confirmed by fluorescence markers and confocal microscopy. The correlation and interaction between the factors (e.g. force, time, depth and distance) were statistically analysed. The samples were processed for histology and immunohistochemistry. After 1-3 weeks of culture in the in-house-designed in vitro bioreactor, fluorescence imaging confirmed that additional mechanical loading increased the viable cell numbers over time as compared with the control. Cells of various phenotypes formed different patterns away from the reaction tube. The cells in the middle part of the gel showed enhanced alkaline phosphatase staining at week 1 but reduced staining at weeks 2 and 3. Additional loading enhanced Sirius Red and type I collagen staining compared with the control. We have thus successfully developed a novel in-house-designed in vitro bioreactor mimicking the biting force to enhance hDPSC osteogenesis in an agarose scaffold and to promote bone formation and/or prevent bone resorption.

Cellular and molecular mechanisms of dental nociception

Due, in part, to the unique structure of the tooth, dental pain is initiated via distinct mechanisms. Here we review recent advances in our understanding of inflammatory tooth pain and discuss 3 hypotheses proposed to explain dentinal hypersensitivity: The first hypothesis, supported by functional expression of temperature-sensitive transient receptor potential channels, emphasizes the direct transduction of noxious temperatures by dental primary afferent neurons. The second hypothesis, known as hydrodynamic theory, attributes dental pain to fluid movement within dentinal tubules, and we discuss several candidate cellular mechanical transducers for the detection of fluid movement. The third hypothesis focuses on the potential sensory function of odontoblasts in the detection of thermal or mechanical stimuli, and we discuss the accumulating evidence that supports their excitability. We also briefly update on a novel strategy for local nociceptive anesthesia via nociceptive transducer molecules in dental primary afferents with the potential to specifically silence pain fibers during dental treatment. Further understanding of the molecular mechanisms of dental pain would greatly enhance the development of therapeutics that target dental pain.

Cyclic hydrostatic pressure stimulates enhanced bone development in the foetal chick femur in vitro

Mechanical loading of bone and cartilage in vivo results in the generation of cyclic hydrostatic forces as bone compression is transduced to fluid pressure in the canalicular network and the joint synovium. It has therefore been suggested that hydrostatic pressure is an important stimulus by which osteochondral cells and their progenitors sense and respond to mechanical loading in vivo. In this study, hydrostatic pressure regimes of 0-279kPa at 0.005-2Hz were applied to organotypically cultured ex vivo chick foetal femurs (e11) for 1hour per day in a custom designed bioreactor for 14days and bone formation assessed by X-ray microtomography and qualified by histology. We found that the mineralised portion of the developing femur cultured under any cyclic hydrostatic pressure regime was significantly larger and/or denser than unstimulated controls but that constant (non-cycling) hydrostatic pressure had no effect on bone growth. Further experiments showed that the increase in bone formation was directly proportional to stimulation frequency (R(2)=0.917), but independent of the magnitude of the pressure applied, whilst even very low frequencies of stimulation (0.005Hz) had significant effects on bone growth. Expression of Type-II collagen in both epiphyses and diaphysis was significantly upregulated (1.48-fold and 1.95-fold respectively), together with osteogenic genes (osteonectin and osteopontin) and the osteocyte maturation marker CD44. This work demonstrates that cyclic hydrostatic pressure promotes bone growth and mineralisation in a developmental model and supports the hypothesis that hydrostatic forces play an important role in regulating bone growth and remodelling in vivo.

Mechanical stretch increases the proliferation while inhibiting the osteogenic differentiation in dental pulp stem cells

Dental pulp stem cells (DPSCs), which can differentiate into several types of cells, are subjected to mechanical stress by jaw movement and occlusal forces. In this study, we evaluated how the uniaxial mechanical stretch influences proliferation and differentiation of DPSCs. DPSCs were isolated and cultured from male Sprague-Dawley rats. Cultured DPSCs were identified by surface markers and the differentiation capabilities as adipocytes or osteoblasts. To examine the response to mechanical stress, uniaxial stretch was exposed to cultured DPSCs. We evaluated the impact of stretch on the intracellular signaling, proliferation, osteogenic differentiation, and gene expressions of DPSCs. Stretch increased the phosphorylation of Akt, ERK1/2, and p38 MAP kinase as well as the proliferation of DPSCs. The stretch-induced proliferation of DPSCs was abolished by the inhibition of the ERK pathway. On the other hand, stretch significantly decreased the osteogenic differentiation of DPSCs, but did not affect the adipogenic differentiation. We also confirmed mRNA expressions of osteocalcin and osteopontin were significantly suppressed by stretch. In conclusion, uniaxial stretch increased the proliferation of DPSCs, while suppressing osteogenic differentiation. These results suggest a crucial role of mechanical stretch in the preservation of DPSCs in dentin. Furthermore, mechanical stretch may be a useful tool for increasing the quantity of DPSCs in vitro for regenerative medicine.

Mechanical stress enhances production of cytokines in human periodontal ligament cells induced by Porphyromonas gingivalis

OBJECTIVE

We have previously reported that human periodontal ligament (hPDL) cells produced many kinds of cytokines as a result of bacterial stimulation, including stimulation with Porphyromonas gingivalis (P. gingivalis). However, the effects of mechanical stress on cytokine production in hPDL cells stimulated by periodontopathogenic bacteria are not clearly understood. In this study, we investigated the effects of mechanical stress on the production of inflammatory cytokines in hPDL cells induced by stimulation with P. gingivalis.

METHODS

The hPDL cells were exposed to various levels of mechanical stress (1, 6, 10 and 50MPa) and costimulated with mechanical stress and P. gingivalis for 24h. Cytokine mRNA expressions were determined by RT-PCR. Cytokines in the culture supernatant were assessed by ELISA, and morphologic changes in hPDL cells were observed.

RESULTS

The expressions of interleukin (IL)-6, IL-8 and tumor necrosis factor-α mRNA were observed in hPDL cells after exposure to mechanical stress. Moreover, the production of IL-6 and IL-8 increased significantly after exposure to mechanical stress ranging from 1 to 10MPa. The amount of IL-8 in the culture supernatants of hPDL cells costimulated with P. gingivalis and mechanical stress was significantly higher than the expected additive amount. The morphology of hPDL cells did not change after exposure to 6MPa, but these cells were partly detached from the Petri dish after exposure to 50MPa.

CONCLUSIONS

These results suggest that local inflammation of the periodontal ligament may be induced mainly by periodontal bacteria, and mechanical stress may promote local inflammation.

Pressure induces interleukin-6 expression via the P2Y6 receptor in human dental pulp cells

BACKGROUND AND OBJECTIVE

An increase in intrapulpal pressure occurs during inflammation and restorative procedures; however, the role of the pressure on human dental pulp cell (HDPC) is not yet clarified. In this study, the effect of pressure on interleukin-6 (IL-6) expression of HDPCs was examined.

DESIGN

HDPCs were applied with pressure (0.7-1.4 g/cm(2)). The level of IL-6 mRNA and protein release was determined by RT-PCR and ELISA, respectively. The signalling pathways were investigated using inhibitors, antagonists, and small interfering RNA.

RESULTS

The results showed that pressure up-regulated IL-6 mRNA expression and protein release in a time- and dose-dependent manner. The implication of P2Y receptor was exhibited by a significant inhibition of pressure-induced IL-6 expression by suramin, an antagonist for the non-specific purinergic receptor family. Using loss of function experiments, we showed MRS2578 (a specific P2Y6 antagonist), as well as P2Y6 small interfering RNA, abolished pressure-induced IL-6, whilst MRS2179 (a specific P2Y1 antagonist) and NF449 (a P2X1, P2X3, P2Y1, and P2Y2 antagonist) had no effect. Finally, we demonstrated that either the conditioned medium collected from pressurised dental pulp cells or addition of UDP, a selective agonist of P2Y6, up-regulated IL-6 expression in HDPCs.

CONCLUSIONS

These results indicate that pressure could induce IL-6 expression through the P2Y6 receptor in HDPCs, leading to a new insight of the role of pressure on cytokine release during pulpal inflammatory process.

Mineral trioxide aggregate promotes odontoblastic differentiation via mitogen-activated protein kinase pathway in human dental pulp stem cells

Mitogen-activated protein kinase (MAPK) pathways are involved in stem cell differentiation. However, the odontoblastic differentiation-inducing effects by mineral trioxide aggregate (MTA) via MAPK pathways have not been clarified in human dental pulp stem cells (DPSCs). In this study we investigated the effects of MTA on cell viability and production of differentiation markers, and the involvement of MAPK signaling pathways in cultured human DPSCs. Cells were cultured with MTA, and the viability and differentiation productions of the cells were determined using the MTT assay and real-time PCR analysis, respectively. MAPK activation was measured by western blotting. MTA at concentrations of 20 and 10 mg/ml was toxic for human DPSCs. MTA significantly increased the expression of alkaline phosphatase (ALP), dentin sialophosphoprotein (DSPP), type I collagen (COLI), osteocalcin (OCN) and bone sialoprotein (BSP) mRNAs and induced the phosphorylation of p42 and p44 (p42/44), p38 and c-Jun N-terminal kinases 1 and 2 (JNK1/2) MAPK. Furthermore, the inhibitor of p42/44 MAPK attenuated the MTA-induced odontoblastic differentiation. These data indicated that MTA-induced odontoblastic differentiation of human DPSCs was via MAPK pathways, which may play a key role in the repair responses of dentin-pulp-like complexes.

Pim-1 is up-regulated by shear stress and is involved in shear stress-induced proliferation of rat mesenchymal stem cells

AIMS

Investigation of the response of mesenchymal stem cells (MSCs) to vascular mechanical forces is very important in the field of cardiovascular intervention. Ser/Thr-protein kinase Pim-1 is a novel transducer of cell survival and the cell cycle that promotes signals in the hematopoietic cell system. Current studies aim to foster an understanding of Pim-1 expression and regulation in MSCs in response to different durations and strengths of laminar shear stress (SS) and to investigate the role of Pim-1 in SS-induced cell proliferation.

MAIN METHODS

A parallel-plate flow chamber was used to control the strength and duration of SS. Proliferation was measured with the BrdU cell proliferation assay. The expressions of Pim-1 mRNA and protein were evaluated by reverse transcription-polymerase chain reaction and western blotting, respectively. RNA interference was used to knock down the Pim-1 gene.

KEY FINDINGS

The results showed that SS up-regulation of Pim-1 mRNA and protein was time-dependent. Pim-1 induction was SS strength-dependent, and the expression level reached a maximum at 30 dynes/cm(2). Inhibitors of p38MAPK and ERK attenuated the SS-induced expression of Pim-1. In addition, SS significantly increased BrdU-uptake, which was effectively blocked by the silencing of Pim-1.

SIGNIFICANCE

These results demonstrated that Pim-1 is expressed in MSCs and plays an important role in the SS-induced proliferation of MSCs.

Uniaxial cyclic tensile stretch inhibits osteogenic and odontogenic differentiation of human dental pulp stem cells

As the most important organs of occlusion, teeth are subjected to a variety of mechanical stresses. These stresses are transmitted into the dental pulp tissue and affect the dental pulp stem cells. In this study, human dental pulp stem cells were isolated from human impacted third molars and their multilineage differentiation abilities were tested. Human dental pulp stem cells were then exposed to cyclic tensile stretch. The results showed that the cyclic tensile stretch inhibited the expression of osteogenic marker genes and proteins such as BMP-2, OCN and ALP. Simultaneously, odontogenic marker genes and proteins such as DSPP, DSP and BSP were also inhibited by the mechanical stress. It was concluded that cyclic tensile stretch inhibits the osteogenic and odontogenic differentiation of dental pulp stem cells.

Human bone marrow stromal cells display variable anatomic site-dependent response and recovery from irradiation

OBJECTIVES

Orofacial bone is commonly affected by osteoradionecrosis (ORN) during head and neck cancer radiotherapy possibly due to interactions of several factors including radiation damage to resident bone marrow stromal cells (BMSCs). Irradiation causes DNA damage, triggers p53-dependent signalling resulting in either cell-cycle arrest or apoptosis. In same individuals, disproportionately higher rapid growth of orofacial BMSCs relative to those of axial/appendicular bones suggests their response to radiation is skeletally site-specific. We hypothesised that survival and osteogenic recovery capacity of irradiated human BMSCs is site-dependent based on anatomic skeletal site of origin.

METHODS

Early passage BMSCs from maxilla, mandible and iliac crest of four normal volunteers were exposed to 2.5 to 10 Gy gamma radiation to evaluate clonogenic survival, effects on cell cycle, DNA damage, p53-related response and in vivo osteogenic regenerative capacity.

RESULTS

Orofacial bone marrow stromal cells (OF-MSCs) survived higher radiation doses and recovered quicker than iliac crest (IC-MSCs) based on clonogenic survival, proliferation and accumulation in G0G1 phase. Post-irradiation p53 level was relatively unchanged but expression of p21, a downstream effector was moderately increased in OF-MSCs. Re-establishment of in vivo bone regeneration was delayed more in irradiated IC-MSCs relative to OF-MSCs.

CONCLUSIONS

Effect of irradiation on human BMSCs was skeletal site-specific with OF-MSCs displaying higher radio-resistance and quicker recovery than IC-MSCs.

Mechanical stress promotes odontoblastic differentiation via the heme oxygenase-1 pathway in human dental pulp cell line

AIMS

Although heme oxygenase-1 (HO-1) is involved in osteoblastic differentiation, the HO-1- and odontoblastic differentiation-inducing effects of mechanical stress (MS) have not been clarified in human dental pulp cells (HDPCs). In this study, we examined the effects of MS on the odontoblastic differentiation of immortalized HDPCs and on the primary intracellular signaling pathways, including the HO-1 pathway, implicated in this differentiation.

MAIN METHODS

A Flexercell strain unit was used to generate cyclic tensile strain in HDPCs. Expressions of mRNAs encoding HO-1 and HDPC differentiation markers, such as osteopontin (OPN), bone sialoprotein (BSP), dentin sialophosphoprotein (DSPP), and dentin matrix-protein-1 (DMP-1), were evaluated using the reverse transcription-polymerase chain reaction. Expression of the NF-E2-related transcription factor 2 (Nrf2) protein was analyzed by Western blotting.

KEY FINDINGS

MS significantly increased the expression of HO-1, OPN, BSP, DSPP, and DMP-1 mRNAs in HDPCs. HO-1 silencing and inhibitors of HO-1, p38 MAPK, ERK, phosphoinositide 3-kinase, and nuclear factor-kappaB (NF-kappaB) all attenuated MS-stimulated differentiation. The MS-induced nuclear translocation of Nrf2 was suppressed by inhibitors of PI3K and NF-kappaB.

SIGNIFICANCE

Collectively, these results provide the first evidence that MS stimulates odontoblastic differentiation of HDPCs via modulation of the Nrf2-mediated HO-1 pathway.