Purification and characterization of an acidophilic cellulase from Pleurotus ostreatus and its potential for agrowastes valorization

Biodegradation of agave Comiteco bagasse by Pleurotus spp.: a source of cellulases useful in hydrolytic treatment to produce reducing sugars

This study aimed to determine the production parameters of five strains of Pleurotus spp. during their cultivation on agave Comiteco bagasse, as well as the feasibility of using cellulolytic extracts to produce reducing sugars in the same bagasse. After cultivation, the basidiome production parameters varied between 41.2 and 65.7% (biological efficiency), 0.17 and 0.30 (yield), 0.60 and 0.90% (production rate), 16.4 and 41.1% (Bioconversion) and 9.4 and 21.3 g (mean mushroom weight). At day 15 of growth, P. djamor showed the highest β-glucosidase activity (43.95 ± 4.5 IU/g); on day 33. The same strain had the highest endoglucanase activity (21.12 ± 0.5 IU/ml). Both extracts were partially purified, and the kinetic parameters Vmax and Km were estimated (20.83 µmole/ml sec and 232.01 µmole/ml for β-glucosidase and 685.01 µmole/ml sec and 1,240.34 µmole/ml for endoglucanase). In the enzymatic hydrolysis assay, the highest concentration of reducing sugars (43.13 ± 1.09 g/L; 0.21 g/g bagasse) was obtained by a mixture of the two partially purified extracts acting synergistically after 48 h and with a pH adjustment. The results suggest that the use of agave Comiteco bagasse for cultivating edible mushrooms while obtaining cellulolytic extracts is an alternative treatment for waste reduction and valorization of agro-industrial by-products.

Biochemical Evaluation of Agaricus and Pleurotus Strains in Batch Cultures for Production Optimization of Valuable Metabolites

The production of various biochemical compounds such as proteins, glucans and glucanases, from the mycelium of four strains of Basidiomycetes species, Agaricus bisporus, Agaricus subrufescens, Pleurotus eryngii and Pleurotus ostreatus, during batch culture in shaking flasks, was studied. Fungi were cultured for 26 days in defined media with glucose as carbon source and were primarily evaluated for their ability to consume glucose and produce mycelial mass and intracellular polysaccharides (IPS). Results showed that on the 26th day of cultivation, P. ostreatus produced the maximum biomass (16.75 g/L), whereas P. eryngii showed the maximum IPS concentration (3.82 g/L). All strains presented a similar pattern in total protein production, with A. bisporus having the highest percentage of total proteins (36%, w/w). The calculated correlation coefficients among ribonucleic acid (RNA) vs. biomass (0.97) and RNA vs. protein (0.97) indicated a very strong relation between RNA and biomass/protein synthesis. The studied strains exhibited an increase in total glucan and glucanase (β-1,6) production during cultivation, with A. bisporus reaching the highest glucan percentage (8%, w/w) and glucanase activity (12.7 units/g biomass). Subsequently, processed analytical data were used in contour-graph analysis for data extrapolation to optimize future continuous culture.

Cellulase production by Aspergillus niger using urban lignocellulosic waste as substrate: Evaluation of different cultivation strategies

Cellulases are used in various industries, acting efficiently and sustainably in the degradation of cellulose contained in different raw materials and recovering high value products. It is the third largest group of enzymes consumed industrially, as they are required in processes linked to the food, biofuel, textile, cleaning products, among others. However, the main disadvantage in the use of commercial cellulases is the high cost. In this context, the objective of this work was to determine conditions for obtaining more efficient and economical cellulases. For this, the efficiency in obtaining the extracellular cellulases endoglucanase (CMCase) and exoglucanase (FPase) by a fungus Aspergillus niger was investigated using an urban lignocellulosic waste as substrate characterized by tree leaves collected from squares and avenues in urban areas. As urban lignocellulosic waste is an innovative raw material, its chemical composition was determined. This substrate contains 20.36% cellulose and induced the production of cellulases in all fermentation methods, proving to be a promising and sustainable source. The influence of the nutrient medium on CMCase and FPase activities was evaluated for three different sequential fermentation (SF) configurations. Medium 2 provided an increase of up to 100 U/L of CMCase and FPase in relation to medium 1. The interactive effect of pH and moisture content on CMCase e FPase production under SF was studied in a central composite design (CCD). Also, different fermentation methods (solid state, submerged and sequential) were evaluated. The use of SF increased the enzymatic activities of both cellulases by 140% compared to other conventional methods and also stood out in the production of proteins (270.05 μg/mL) and reducing sugars (1.19 mg/mL). The desirability function determined the optimal activities of CMCase and FPase as 413.49 U/L and 230.68 U/L, respectively, obtained from the optimal variables of pH 5.5 and 75% moisture content under SF. The effect of pH and moisture content on the activity of each cellulase was analyzed using the Pareto chart and response surface methodology (RSM). These results revealed favorable strategies for cellulase production, such as the use of urban lignocellulosic waste, SF and ideal operational conditions.

Biochemical Characterization of Thermostable Carboxymethyl Cellulase and β-Glucosidase from Aspergillus fumigatus JCM 10253

Second-generation biofuel production has emerged as a prominent sustainable and alternative energy. The biochemical properties of cellulolytic enzymes are imperative for cellulosic biomass conversion into fermentable sugars. In the present study, thermostable CMCase and β-glucosidase were purified and characterized from Aspergillus fumigatus JCM 10253. The enzymes were purified through 80% ammonium sulfate precipitation, followed by dialysis and DEAE-cellulose ion-exchange chromatography. The molecular masses of the purified CMCase and β-glucosidase were estimated to be 125 kDa and 90 kDa, respectively. The CMCase and β-glucosidase demonstrated optimum activities at pH 6.0 and 5.0, respectively. Their respective maximum temperatures were 50 and 60 °C. The cellulase activities were stimulated by 10 mM concentration of Ca²⁺, Ni²⁺, Fe²⁺, Mg²⁺, Cu²⁺, Mn²⁺, Zn²⁺, and Pb²⁺ ions. The CMCase activity was enhanced by surfactant Triton X-100 but marginally influenced by most inhibitors. The β-glucosidase retained its activity in the presence of organic solvents (30%) isoamyl alcohol, heptane, toluene, and ethyl acetate, while CMCase was retained with acetone during a prolonged incubation of 168 h. The K_m and V_max values of the two cellulases were studied. The properties of high thermostability and good tolerance against organic solvents could signify its potential use in biofuel production and other value-added products.

Overview of lignocellulolytic enzyme systems with special reference to valorization of lignocellulosic biomass

Lignocellulosic biomass, one of the most valuable natural resources, is abundantly present on earth. Being a renewable feedstock, it harbors a great potential to be exploited as a raw material, to produce various value-added products. Lignocellulolytic microorganisms hold a unique position regarding the valorization of lignocellulosic biomass as they contain efficient enzyme systems capable of degrading this biomass. The ubiquitous nature of these microorganisms and their survival under extreme conditions have enabled their use as an effective producer of lignocellulolytic enzymes with improved biochemical features crucial to industrial bioconversion processes. These enzymes can prove to be an exquisite tool when it comes to the eco-friendly manufacturing of value-added products using waste material. This review focuses on highlighting the significance of lignocellulosic biomass, microbial sources of lignocellulolytic enzymes and their use in the formation of useful products.

Current perspective on production and applications of microbial cellulases: a review

The potential of cellulolytic enzymes has been widely studied and explored for bioconversion processes and plays a key role in various industrial applications. Cellulase, a key enzyme for cellulose-rich waste feedstock-based biorefinery, has increasing demand in various industries, e.g., paper and pulp, juice clarification, etc. Also, there has been constant progress in developing new strategies to enhance its production, such as the application of waste feedstock as the substrate for the production of individual or enzyme cocktails, process parameters control, and genetic manipulations for enzyme production with enhanced yield, efficiency, and specificity. Further, an insight into immobilization techniques has also been presented for improved reusability of cellulase, a critical factor that controls the cost of the enzyme at an industrial scale. In addition, the review also gives an insight into the status of the significant application of cellulase in the industrial sector, with its techno-economic analysis for future applications. The present review gives a complete overview of current perspectives on the production of microbial cellulases as a promising tool to develop a sustainable and greener concept for industrial applications.

Cellulase production by white-rot basidiomycetous fungi: solid-state versus submerged cultivation

White-rot basidiomycetous (WRB) fungi are a group of wood-decaying fungi that are known to be endowed with the ability to secrete enzymes that can catalyze decomposition of a range of plant cell wall polysaccharides, including cellulose and lignin. Expression of these enzymes is induced by the substrate and the enzyme yields obtained depend on the growth of the fungi and thus the mode of cultivation. In order to exploit WRB fungi for local enzyme production for converting lignocellulosic materials in biorefinery processes, the fungi can principally be cultivated in either solid-state (SSC) or submerged cultivation (SmC) systems. In this review, we quantitatively assess the data available in the literature on cellulase production yields by WRB fungi cultivated by SSC or SmC. The review also assesses cellulolytic enzyme production rates and enzyme recovery when WRB fungi are cultivated on different biomass residues in SSC or SmC systems. Although some variation in cellulase production yields have been reported for certain substrates, the analysis convincingly shows that SmC is generally more efficient than SSC for obtaining high cellulase production yields and high cellulase production rates on the substrate used. However, the cultivation method also affects the enzyme activity profile obtained, and the resulting enzyme titers and significant dilution of the enzymes usually occurs in SmC. The review also highlights some future approaches, including sequential cultivations and co-cultivation of WRB fungi for improved enzyme expression, as well as on-site approaches for production of enzyme blends for industrial biomass conversion. The quantitative comparisons made have implications for selection of the most appropriate cultivation method for WRB fungi for attaining maximal cellulase production.