Applications of Celite-adsorbed white radish (Raphanus sativus) peroxidase in batch process and continuous reactor for the degradation of reactive dyes

Development of chia gum/alginate-polymer support for horseradish peroxidase immobilization and its application in phenolic removal

Chia gum's molecular structure with distinctive properties as well as the alginate-based hydrogel's three-dimensionally cross-linked structure can provide a potent matrix for immobilization of enzyme. Herein, chia gum (CG)/alginate (A)-polymeric complex was synthesized and employed as a support material for the immobilization of horseradish peroxidase (HRP). HRP was successfully immobilized on the developed ACG-polymeric support, and the highest immobilization recovery (75%) was observed at 1.0% CG and 2% A, pH 7.0, and 50 units of the enzyme. The structure, morphology, and thermal properties of the prepared ACG-HRP were demonstrated using Fourier Transform Infrared (FTIR), Scanning Electron Microscope, and Thermogravimetric (TGA) analyses. ACG-HRP showed a good reusability (60%) over ten reuses. The immobilized ACG-HRP displayed an acidic pH optimum (6.0), a higher temperature optimum (50 °C), and improved thermal stability (30-50 °C) compared to the soluble HRP at pH 7.0, 40 °C and (30-40 °C), respectively. ACG-HRP has a lower affinity for hydrogen peroxide (H2O2) and guaiacol and a higher oxidizing affinity for a number of phenolic substrates. The ACG-HRP demonstrated greater resistance to heavy metals, isopropanol, urea, Triton X-100, and urea, as well as improved efficiency for eliminating phenol and p-chlorophenol. The developed ACG-polymeric support provided improved enzyme properties, allowed the reuse of the immobilized HRP in 10 cycles, and made it promising for several biotechnological applications.

Preparation and evaluation of celite decorated iron nanoparticles for the sequestration performance of hexavalent chromium from aqueous solution

The increasing usage of an important heavy metal chromium for industrial purposes, such as metallurgy, electroplating, leather tanning, and other fields, has contributed to an augmented level of hexavalent chromium (Cr(VI)) in watercourses negatively impacting the ecosystems and significantly making Cr(VI) pollution a serious environmental issue. In this regard, iron nanoparticles exhibited great reactivity in remediation of Cr(VI)-polluted waters and soils, but, the persistence and dispersion of the raw iron should be improved. Herein, this article utilized an environment-friendly celite as a modifying reagent and described the preparation of a novel composites namaly celite decorated iron nanoparticles (C-Fe⁰) and evaluation of C-Fe⁰ for the sequestration performance of Cr(VI) from aqueous solution. The results indicated that initial Cr(VI) concentration, adsorbent dosage, and especially solution pH are all critical factors to control C-Fe⁰ performance in Cr(VI) sequestration. We demonstrated that C-Fe⁰ could achieve a high Cr(VI) sequestration efficiency with an optimized adsorbent dosage. Fitness of the pseudo-second-order kinetics model with data indicated that adsorption was the rate-controlling step and chemical interaction controlled Cr(VI) sequestration on C-Fe⁰. The adsorption isotherm of Cr(VI) could be the best depicted by Langmuir model with a monolayer adsorption. The underlying sequestration path of Cr(VI) by C-Fe⁰ was then put forward, and the combined effect of adsorption and reduction implied the potentials of C-Fe⁰ in Cr(VI) removal.

LC-MSMS based screening of emerging pollutant degradation by different peroxidases

BACKGROUND

The presence of a wide range of bioactive organic pollutants in wastewater and municipal water sources is raising concerns about their potential effects on humans. Not surprisingly, various approaches are being explored that can efficiently degrade these persistent organic pollutants. Use of peroxidases has recently been recognized as a novel remediation approach that may have potential advantages over conventional degradation techniques. However, testing the abilities of different peroxidases to degrade diverse emerging pollutants is tedious and cumbersome.

RESULTS

In the present study, we present a rapid and robust approach to easily test the degradability of 21 different emerging pollutants by five different peroxidases (soybean peroxidase, chloroperoxidase, lactoperoxidase, manganese peroxidase, and horseradish peroxidase) using an LC-MSMS approach. Furthermore, this approach was also used to examine the role of a redox mediator in these enzymatic degradation assays. Our results show that some of the organic pollutants can be easily degraded by all five of the peroxidases tested, whereas others are only degraded by a specific peroxidase (or when a redox mediator was present) and there are some that are completely resistant to degradation by any of the peroxidases tested (even in the presence of a redox mediator). The degradation of furosemide and trimethoprim by soybean peroxidase and chloroperoxidase, respectively, was investigated in detail by examining the transformation products generated during their degradation. Some of the products generated during enzymatic breakdown of these pollutants have been previously reported by others, however, we report many new transformation products.

CONCLUSIONS

LC-MSMS approaches, like the one described here, can be used to rapidly evaluate the potential of different peroxidases (and redox requirements) to be used as bioremediation agents. Our preliminary result shows peroxidases hold tremendous potential for being used in a final wastewater treatment step.

Conductive bacterial cellulose by in situ laccase polymerization of aniline

Conductive and colored bacterial cellulose (BC) was developed by entrapment of polyaniline (PANi) onto dry BC membranes. The polyaniline was produced by in situ green polymerization of aniline by Myceliophthora thermophila laccase at pH = 4, 25°C, in the presence of a mediator, 1-hydroxybenzotriazol (HBT), using two different reactors, a water bath (WB) and an ultrasonic bath (US). MALDI-TOF and 1H NMR characterization of the experiment solutions confirmed the efficient polymerization of aniline by laccase. The dried BC membranes with entrapped polyaniline showed electrical conductive behavior and strong coloration, opening novel routes for the exploitation of functionalized bacterial cellulose as a green material for technical textiles, wearables, and other applications.

Horseradish peroxidase-mediated decolourization of Orange II: modelling hydrogen peroxide utilization efficiency at different pH values

Enzymatic decolourization of azo-dyes could be a cost-competitive alternative compared to physicochemical or microbiological methods. Stoichiometric and kinetic features of peroxidase-mediated decolourization of azo-dyes by hydrogen peroxide (P) are central for designing purposes. In this work, a modified version of the Dunford mechanism of peroxidases was developed. The proposed model takes into account the inhibition of peroxidases by high concentrations of P, the substrate-dependant catalatic activity of peroxidases (e.g. the decomposition of P to water and oxygen), the generation of oxidation products (OP) and the effect of pH on the decolourization kinetics of the azo-dye Orange II (OII). To obtain the parameters of the proposed model, two series of experiments were performed. In the first set, the effects of initial P concentration (0.01-0.12 mM) and pH (5-10) on the decolourization degree were studied at a constant initial OII concentration (0.045 mM). Obtained results showed that at pH 9-10 and low initial P concentrations, the consumption of P was mainly to oxidize OII. From the proposed model, an expression for the decolourization degree was obtained. In the second set of experiments, the effect of the initial concentrations of OII (0.023-0.090 mM), P (0.02-4.7 mM), HRP (34-136 mg/L) and pH (5-10) on the initial specific decolourization rate (q₀) was studied. As a general rule, a noticeable increase in q₀ was observed for pHs higher than 7. For a given pH, q₀ increased as a function of the initial OII concentration. Besides, there was an inhibitory effect of high P concentrations on q₀. To asses the possibility of reusing the enzyme, repeated additions of OII and P were performed. Results showed that the enzyme remained active after six reuse cycles. A satisfactory accordance between the change of the absorbance during these experiments and absorbances calculated using the proposed model was obtained. Considering that this set of data was not used during the fitting procedure of the model, the agreement between predicted and experimental absorbances provides a powerful validation of the model developed in the present work.

A hierarchical assembly of flower-like hybrid Turkish black radish peroxidase-Cu2+ nanobiocatalyst and its effective use in dye decolorization

Effective dye decolorization in wastewater still shows a big challenge. Although the biological methods, especially using enzymes, offer alternative and effective process for dye degradation and overcome the limitations of chemical and physical methods such as the instability, lack of reusability and high cost of free enzymes strictly, which limit their use in many scientific and technical applications. Enzymes rapidly lose their activities in aqueous solutions and against environmental changes due to their very susceptibility and unfavorable conformations. Herein, we report preparation of the enzyme-inorganic hybrid nanostructures with flower-like shape consisting of Turkish black radish peroxidase and Cu²⁺ metal ions using an encouraging enzyme immobilization approach. The peroxidase-Cu²⁺ hybrid nanoflowers (NFs) exhibited enhanced stability and activity towards various pH values and provided excellent dye decolorization efficiency for Victoria blue (VB) dye with more than 90% within 1 h. The NFs were also repeatedly used in efficient and caused 77% VB decolorization efficiency even at tenth cycles. However, to the best of our knowledge, for the first time, we prepared peroxidase enzyme isolated from Turkish black radish incorporated NFs and used them for dye decolorization. We believe that the NFs can be promising materials for dye decolorization in real wastewater treatment.

Mechanistic study of a diazo dye degradation by Soybean Peroxidase

Background

Enzyme based remediation of wastewater is emerging as a novel, efficient and environmentally-friendlier approach. However, studies showing detailed mechanisms of enzyme mediated degradation of organic pollutants are not widely published.

Results

The present report describes a detailed study on the use of Soybean Peroxidase to efficiently degrade Trypan Blue, a diazo dye. In addition to examining various parameters that can affect the dye degradation ability of the enzyme, such as enzyme and H₂O₂ concentration, reaction pH and temperature, we carried out a detailed mechanistic study of Trypan Blue degradation. HPLC-DAD and LC-MS/MS studies were carried out to confirm dye degradation and analyze the intermediate metabolites and develop a detailed mechanistic dye degradation pathway.

Conclusion

We report that Soybean peroxidase causes Trypan Blue degradation via symmetrical azo bond cleavage and subsequent radical-initiated ring opening of the metabolites. Interestingly, our results also show that no high molecular weight polymers were produced during the peroxidase-H₂O₂ mediated degradation of the phenolic Trypan Blue.

Oxidative degradation of Remazol Turquoise Blue G 133 by soybean peroxidase

Reactive dyes are widely employed in textile industries and their removal from wastewaters is a relevant environmental problem. In addition to chemical and physical methods, several bioremediation approaches, involving intact micro-organisms or isolated enzymes, have been proposed to decolorize dye solutions. In this paper, we report the complete and fast decolourization of a Cu(II)-phthalocyanine based reactive dye (Remazol Turquoise Blue G 133) by means of the soybean peroxidase/H(2)O(2) system. The oxidative degradation of the dye in aqueous solution at 25°C was studied as function of pH, revealing a quantitative decolourization yield at acidic pH values with a maximum of activity at pH 3.3. The reaction products were identified and characterized by HPLC-diode array detector (DAD)-mass spectrometry (MS), ionic chromatography and EPR techniques. This analysis showed that the enzyme catalyses the breaking of the phthalocyanine ring producing sulfophthalimide as the main degradation product, and the release of stoichiometric amount of ammonium and Cu(II) ions.

Catalyzed degradation of disperse dyes by calcium alginate-pectin entrapped bitter gourd (Momordica charantia) peroxidase

Calcium-alginate pectin entrapped bitter gourd peroxidase (BGP) has been employed for the treatment of disperse dyes: Disperse Brown 1 (DB 1) and Disperse Red 17 (DR 17). Peroxidase alone was unable to decolorize DR 17 and DB 1. However, the investigated dyes were decolorized maximally by BGP in the presence of 0.2 mmol/L redox mediator, violuric acid (VA). A slow decrease in percent decolorization was observed when VA concentration was higher than 0.2 mmol/L which could likely be due to the high reactivity of its aminoxyl radical (> N-O*) intermediate, that might undergo chemical reactions with aromatic amino acid side chains of the enzyme thereby inactivating it. Maximum decolorization of the dyes was observed at pH 3.0 and 40 degrees C within 2 hr of incubation. Immobilized peroxidase decolorized 98% DR 17 and 71% DB 1 using 35 U of BGP in batch process in 90 min. Immobilized enzyme decolorized 85% DR 17 and 51% DB 1 whereas soluble enzyme decolorized DR 17 to 48% and DB 1 to 30% at 60 degrees C. UV-visible spectral analysis was used to evaluate the degradation of these dyes and their toxicity was tested by Allium cepa test. The generally observed higher stability of the bioaffinity bound enzymes against various forms of inactivation may be related to the specific and strong binding of enzyme with bioaffinity support which prevents the unfolding/denaturation of enzyme. Thus entrapped peroxidase was found to be effective in the decolorization of the investigated dyes.

Immobilization of intracellular carbonyl reductase from Geotrichum candidum for the stereoselective reduction of 1-naphthyl ketone

Different cell disintegration methods were used for the liberation of intracellular carbonyl reductase from Geotrichum candidum, in its active form. Solid shear (bead milling) was proved to be the best method for the extraction of the enzyme. Various solid supports were checked for the immobilization of the purified enzyme. Carbonyl reductase was immobilized on silica with an optimized protein loading of 4 mg/g support. Cross-linking with glutaraldehyde rendered the preparation more stable and suitable for use in consecutive batches. Carbonyl reductase of G. candidum immobilized on silica support and cross-linked by glutaraldehyde was found to be highly efficient biocatalyst formulation for the production of S(-)-1-(1'-naphthyl) ethanol.