Electrochemical piezoelectric reusable immunosensor for aflatoxin B1 detection

Highly Reusable Electrochemical Immunosensor for Ultrasensitive Protein Detection

The detection and quantification of protein biomarkers in bodily fluids is important for many clinical applications, including disease diagnosis and health monitoring. Current techniques for ultrasensitive protein detection, such as enzyme-linked immunosorbent assay (ELISA) and electrochemical sensing, involve long incubation times (1.5-3 hr) and rely on single-use sensing electrodes which can be costly and generate excessive waste. This work demonstrates a reusable electrochemical immunosensor employing magnetic nanoparticles (MNPs) and dually labeled gold nanoparticles (AuNPs) for ultrasensitive measurements of protein biomarkers. As proof of concept, this platform was used to detect C-X-C motif chemokine ligand 9 (CXCL9), a biomarker associated with kidney transplant rejection, immune nephritis from checkpoint inhibitor therapy, and drug-associated acute interstitial nephritis, in human urine. The sensor successfully detected CXCL9 at concentrations as low as 27 pg/mL within ~1 hr. This immunosensor was also adapted onto a handheld smartphone-based diagnostic device and used for measurements of CXCL9, which exhibited a lower limit of detection of 65 pg/mL. Lastly, we demonstrate that the sensing electrodes can be reused for at least 100 measurements with a negligible loss in analytical performance, reducing the costs and waste associated with electrochemical sensing.

Biosensors for Deoxynivalenol and Zearalenone Determination in Feed Quality Control

Mycotoxin contamination of cereals used for feed can cause intoxication, especially in farm animals; therefore, efficient analytical tools for the qualitative and quantitative analysis of toxic fungal metabolites in feed are required. Current trends in food/feed analysis are focusing on the application of biosensor technologies that offer fast and highly selective and sensitive detection with minimal sample treatment and reagents required. The article presents an overview of the recent progress of the development of biosensors for deoxynivalenol and zearalenone determination in cereals and feed. Novel biosensitive materials and highly sensitive detection methods applied for the sensors and the application of these sensors to food/feed products, the limit, and the time of detection are discussed.

Biosensing platform on ferrite magnetic nanoparticles: Synthesis, functionalization, mechanism and applications

Ferrite magnetic nanoparticles (FMNPs) are gaining popularity to design biosensors for high-performance clinical diagnosis. The fusion of information shows that FMNPs based biosensors require well-tuned FMNPs as detection probes to produce large and specific biological signals with minimal non-specific binding. Nevertheless, there is a noticeable lacuna of information to solve the issues related to suitable synthesis route, particle size reduction, functionalization, sensitivity towards targeted intercellular biological tiny particles, and lower signal-to-noise ratio. Therefore it allows exploring unique characteristics of FMNPs to design a suitable sensing device for intracellular measurements and diseases detection. This review focuses on the extensively used synthesis routes, their advantages and limitations, crystalline structure, functionalization, along with recent applications of FMNPs in biosensors, taking into consideration their analytical figures of merit and range of linearity. This work also addresses the current progress, key factors for sensitivity, selectivity and productivity improvement along with the challenges, future trends and perspectives of FMNPs based biosensors.

A review on graphene-based electrochemical sensor for mycotoxins detection

This work focuses on the study of nanomaterial-based sensors for mycotoxins detection. Due to their adverse effects on humans and animals, mycotoxins are heavily regulated, and the foodstuff and feed stocks with a high probability of being contaminated are often analyzed. In this context, the recent developments in graphene-based electrochemical sensors for mycotoxins detection were examined. The mycotoxins' toxicity implications on their detection and the development of diverse recognition elements are described considering the current challenges and limitations.

Dimanganese trioxide (Mn2O3) based label-free electrochemical biosensor for detection of Aflatoxin-B1

This work presents, a manganese oxide nanoparticles (Mn₂O₃nps) based electrochemical immunosensor for the detection of Aflatoxin-B1 (AFB1). X-ray diffrraction spectroscopy study confirms the purely synthesized Mn₂O₃nps with an average crystallite size of 31.5 nm. Transmission electron microscopy study confirms average particle size of 45 nm. To fabricate an electrochemical biosensor, a thin film of Mn₂O₃nps was fabricated onto indium tin oxide (ITO) surface using electrophoretic technique. Such fabricated thin film was utilized to immobilize antibodies (Anti-AFB1) for the selective detection of AFB1 using differential pulse voltammetry technique. Prior to perform sensing, bovine serum albumin (BSA) was utilized to block the uncovered sites on the Anti-AFB1/Mn₂O₃/ITO immunoelectrode surface. The response of BSA/Anti-AFB1/Mn₂O₃/ITO immunoelectrode was measured as a function of AFB1 in a linear detection range of 1 pg mL^-1 to 10 µg mL^-1 and sensor showed highest sensitivity of 2.044 μA mL ng^-1cm^-2 with lower detection limit of 0.54 pg mL^-1. A spiked sample response of corn extract was studied in the linear range of 1 pg mL^-1 to 10 µg mL^-1 and immunoelectrode (BSA/Anti-AFB1/Mn₂O₃/ITO) showed recovery rate of 98.6 %.

Recent Advances in Aflatoxins Detection Based on Nanomaterials

Aflatoxins are the secondary metabolites of Aspergillus flavus and Aspergillus parasiticus and are highly toxic and carcinogenic, teratogenic and mutagenic. Ingestion of crops and food contaminated by aflatoxins causes extremely serious harm to human and animal health. Therefore, there is an urgent need for a selective, sensitive and simple method for the determination of aflatoxins. Due to their high performance and multipurpose characteristics, nanomaterials have been developed and applied to the monitoring of various targets, overcoming the limitations of traditional methods, which include process complexity, time-consuming and laborious methodologies and the need for expensive instruments. At the same time, nanomaterials provide general promise for the detection of aflatoxins with high sensitivity, selectivity and simplicity. This review provides an overview of recent developments in nanomaterials employed for the detection of aflatoxins. The basic aspects of aflatoxin toxicity and the significance of aflatoxin detection are also reviewed. In addition, the development of different biosensors and nanomaterials for aflatoxin detection is introduced. The current capabilities and limitations and future challenges in aflatoxin detection and analysis are also addressed.

Gold nanoparticles mediated designing of versatile aptasensor for colorimetric/electrochemical dual-channel detection of aflatoxin B1

This work is aimed to develop of a new class of versatile aptasensor to specifically detect aflatoxin B1 (AFB1) using dual-channel detection method. To achieve this objective, gold nanoparticles (AuNPs) having peroxidase-like activity and capability of promoting silver deposition were used as the versatile label for both colorimetric and electrochemical techniques. First of all, aptamer (apt) modified Fe₃O₄@Au magnetic beads (MBs-apt) and cDNA modified AuNPs (cDNA-AuNPs) were prepared to use as capture probes and signal probes, respectively. Taking advantage of hybridization reaction between apt and cDNA, these two probes were coupled with each other to generate MBs-apt/cDNA-AuNPs bioconjugations. The high affinity between apt and AFB1 made cDNA-AuNPs detached from MBs-apt, and the released signal probes were separated and collected using an external magnetic field and used for both colorimetric and electrochemical detection channels. The dual-channel signals were directly proportional to logarithm of AFB1 concentration within the ranges of 5-200 ng mL^-1 and 0.05-100 ng mL^-1. The detection limit can reach as low as 35 pg mL^-1 and 0.43 pg mL^-1 for colorimetric and electrochemical channel, respectively. Moreover, the proposed aptasensor has been successfully applied to determine AFB1 in corn samples with satisfactory results. This dual-channel detection method can not only improve the detection precision and diversity significantly, but also can reduce the false-negative and-positive rates in food quality monitoring. We believe we have provided a general strategy with the convincing dual-readout mode which possess great promising in all of the aptamer related fields.

Functional nanomaterials based immunological detection of aflatoxin B1: a review

Aflatoxin B1 (AFB1) is highly carcinogenic, mutagenic and teratogenic. Accordingly, sensitive, rapid and cost-effective techniques for detection of AFB1 is in urgent demand for food safety and the health of consumers. In this review, we report the current state of immunoassay formats and development, mainly based on nanomaterials for determination of AFB1. Following an introduction of the field, the microplate-, membrane- and microelectrode-based immunoassays are described. The relevant mechanisms, sensitivities, superiorities and deficiencies of each format are discussed. Finally, perspectives on the future development of nanomaterials-based immunoassays for AFB1 are provided.

Electrochemical immunosensor based on an antibody-hierarchical mesoporous SiO2 for the detection of Staphylococcus aureus

The outbreak of food-borne pathogens has become a serious concern; therefore, the detection of pathogenic bacteria in food is required. Untreated, sensitive, and reliable sensors should be developed for the detection of Staphylococcus aureus (S. aureus). In this study, a sensitive antibody-based electrochemical immunosensor was developed using antibody (Ab)-hierarchical mesoporous silica (HMS) bio-conjugates for label-free detection of low concentrations of S. aureus. First, a bio-template method based on butterfly wings was used to prepare the HMS. Then, the carrier material was amino-functionalized to cross-link the antibody with glutaraldehyde. The Ab-HMS bio-conjugates were then immobilized on a glassy carbon electrode (GCE), and the presence of S. aureus was detected by analyzing the changes in the peak currents after the antigen-antibody complex formation. Differential pulse voltammetry (DPV) was performed with bacterial concentrations ranging from 10 to 2 × 103 colony forming units (CFU) mL-1. Selective tests were performed using Escherichia coli (E. coli), Listeria monocytogenes (L. monocytohenes), and Salmonella, and the selective assays showed specific detection of S. aureus using the sensor. In addition, the immunosensor showed a good linear relationship between the peak current increase and logarithmic S. aureus concentration (R 2 = 0.9759) with a fast detection time (20 min) and detection limit of 11 CFU mL-1. When the electrochemical impedance spectroscopy (EIS) was performed under the same conditions, the results showed a good linear relationship between the impedance change value and the bacterial concentration (R 2 = 0.9720), the limit of detection (LOD) was 12 CFU mL-1. The performance of the sensor was compared with that of the colony counting method in the spiked milk sample test. The results showed no significant difference in the test results. Hence, this electrochemical immunosensor can be used to quickly detect S. aureus in actual food samples with a high sensitivity, specificity and stability.

Development of a smartphone-based biomimetic sensor for aflatoxin B1 detection using molecularly imprinted polymer membranes

A novel smartphone-based optical biomimetic sensor based on free-standing molecularly imprinted polymer (MIP) membranes was developed for rapid and sensitive point-of-care detection of aflatoxin B1. The developed MIP membranes were capable of selective recognition of the target analyte and, at the same time, of generation of a fluorimetric sensor response, which could be registered using the camera of a smartphone and analysed using image analysis. The developed system provides a possibility of synchronous detection of aflatoxin B1 in 96 channels. UV irradiation of aflatoxin B1, selectively bound by the MIP membranes from the analysed samples, initiated fluorescence of aflatoxin B1 with intensity directly proportional to its concentration. The composition of the MIP membranes used as a recognition element was optimised taking into account data of computational modelling. Two functional monomers (2-acrylamido-2-methyl-1-propansulfonic acid and acrylamide) were identified as optimal for the formation of aflatoxin B1-selective binding sites in the structure of the MIP membranes. Working characteristics of the smartphone-based sensor system were also estimated. The influence of pH and of buffer and NaCl concentrations on the smartphone-based sensor responses were studied. High selectivity of the developed sensor system towards aflatoxin B1 was confirmed in experiments with the close structural analogue of the target analyte - aflatoxin G2, and ochratoxin A. The detection limit for aflatoxin B1 using the smartphone-based sensor systems was found to be 20 ng mL^-1 for the sensor based on MIP membranes synthesised with acrylamide as a functional monomer. The storage stability of the recognition elements of the developed sensors was estimated as one year when stored at 22 °C. The possibility to detect the aflatoxin B1 in contaminated food samples was shown. The MIP-membrane-based sensor system provided a convenient point-of-care approach in food safety testing.

Progress on nanostructured electrochemical sensors and their recognition elements for detection of mycotoxins: A review

Nanomaterial-embedded sensors have been developed and applied to monitor various targets. Mycotoxins are fungal secondary metabolites that can exert carcinogenic, mutagenic, teratogenic, immunotoxic, and estrogenic effects on humans and animals. Consequently, the need for the proper regulation on foodstuff and feed materials has been recognized from times long past. This review provides an overview of recent developments in electrochemical sensors and biosensors employed for the detection of mycotoxins. Basic aspects of the toxicity of mycotoxins and the implications of their detection are comprehensively discussed. Furthermore, the development of different molecular recognition elements and nanomaterials required for the detection of mycotoxins (such as portable biosensing systems for point-of-care analysis) is described. The current capabilities, limitations, and future challenges in mycotoxin detection and analysis are also addressed.

Novel quartz crystal microbalance immunodetection of aflatoxin B1 coupling cargo-encapsulated liposome with indicator-triggered displacement assay

A simple and sensitive quartz crystal microbalance (QCM) immunosensing platform was designed for the high-efficient detection of aflatoxin B₁ (AFB₁) in foodstuff. Initially, phenoxy-derived dextran molecule was immobilized on the surface of QCM gold substrate by using thiolated β-cyclodextrin based on the supramolecular host-guest chemistry between phenoxy group and cyclodextrin. Then, AFB₁-bovine serum albumin (AFB₁-BSA)-conjugated concanavalin A (Con A) was assembled onto the QCM probe through the dextran-Con A interaction. Glucose-loaded nanoliposome, labeled with monocolonal anti-AFB₁ antibody, was used for the amplification of QCM signal. Upon target AFB₁ introduction, the analyte competed with the immobilized AFB₁-BSA on the probe for the labeled anti-AFB₁ antibody on the nanoliposome. Based on specific antigen-antibody reaction, the amount of the conjugated nanoliposomes on the QCM probe gradually decreased with the increment of target AFB₁ in the sample. Upon injection of Triton X-100 in the detection cell, the carried nanoliposome was lysed to release the encapsulated glucose molecules. Thanks to the stronger affinity of Con A toward glucose than that of dextran, AFB₁-BSA-labeled Con A was displaced from the QCM probe, resulting in the change of the local frequency. Under the optimum conditions, the shift of the functionalized QCM immunosensing interface in the frequency shift was proportional to the concentration of target AFB₁ within a dynamic range from 1.0 ng kg^-1 to 10 μg kg^-1 at a low detection limit of 0.83 ng kg^-1. In addition, the acceptable assayed results on precision, reproducibility, specificity and method accuracy for the analysis of real samples were also acquired. Importantly, our strategy can provide a signal-on competitive immunoassay for the detection of small molecules, e.g., mycotoxins and biotoxins, thereby representing a versatile sensing schemes by controlling the corresponding antibody or hapten in the analysis of food safety.

Tetramethyl-6-carboxyrhodamine quenching-based aptasensing platform for aflatoxin B1: Analytical performance comparison of two aptamers

In this study, a simple TAMRA (tetramethyl-6-carboxyrhodamine) quenching-based aptasensing platform was designed for the detection of aflatoxin B1 (AFB1). Here, we compared the analytical performance of two aptamer sequences: seqA and seqB. The AFB1 detection was based on the interactions of FAM (carboxyfluorescein)-labeled aptamer with TAMRA-labeled DNA complementary strand in the presence and absence of target analyte. Under optimized experimental conditions, TAMRA-labeled strand quenched the fluorescence response of FAM-labeled aptamer due to the noncovalent interaction between the two DNA strands. The binding of AFB1 induced the complex formation and weakened the interaction between FAM-labeled aptamer and TAMRA-labeled complementary strand, resulting in the fluorescence recovery. By using this principle concept, an assay was constructed for the detection of AFB1. The method exhibited good sensitivity, good selectivity with a limit of detection of 0.2 ng ml(-1), and a wide linear range from 0.25 to 32 ng ml(-1). For real sample application, the aptasensors were tested in beer and wine samples, with good recovery rates obtained for AFB1 detection.

Recent advances in mycotoxins detection

Mycotoxins contamination in both food and feed is inevitable. Mycotoxin toxicity in foodstuff can occur at very low concentrations necessitating early availability of sensitive and reliable methods for their detection. The present research thrust is towards the development of a user friendly biosensor for mycotoxin detection at both academic and industrial levels to replace conventional expensive chromatographic and ELISA techniques. This review critically analyzes the recent research trend towards the construction of immunosensor, aptasensor, enzymatic sensors and others for mycotoxin detection with a reference to label and label free methods, synthesis of new materials including nano dimension, and transuding techniques. Technological aspects in the development of biosensors for mycotoxin detection, current challenges and future prospects are also included to provide a overview and suggestions for future research directions.