Therapeutic neovascularization promoted by injectable hydrogels

Myocardial Matrix Hydrogels Mitigate Negative Remodeling and Improve Function in Right Heart Failure Model

This study evaluates the effectiveness of myocardial matrix (MM) hydrogels in mitigating negative right ventricular (RV) remodeling in a rat model of RV heart failure. The goal was to assess whether a hydrogel derived from either the right or left ventricle could promote cardiac repair. Injured rat right ventricles were injected with either RV-or left ventricular-derived MM hydrogels. Both hydrogels improved RV function and morphology and reduced negative remodeling. This study supports the potential of injectable biomaterial therapies for treating RV heart failure.

Recent Advances in Chemically Engineered Nanostructures Impact on Ischemic Stroke Treatment

Stroke is a serious public health problem that raises expenses for society and causes long-term impairment and death. However, due to restricted blood-brain barrier (BBB) penetration, there are few treatment alternatives for treating stroke. Recanalization techniques, neuroprotective medications, and recovery techniques are all forms of treatment. The ischemic stroke treatment window is too narrow for logical and efficient therapy, and detection is possible only in advanced stages. BBB integrity disruption, neurotoxicity, and the brief half-life of therapeutic thrombolytics are the key molecular pathogenic causes of ischemic stroke. Existing neuroprotective drugs' inability to promote the recovery of ischemic brain tissue after a stroke is another factor that contributes to the disease's progression, chronic nature, and severity. A possible approach to getting around these medication restrictions and boosting the effectiveness of therapies is nanotechnology. In order to get around these drug-related restrictions and boost the effectiveness of therapies for neurological conditions such as stroke, nanotechnology has emerged as a viable option. These problems might be avoided by using nanoparticle-based methods to create a thrombolytic medication that is safe to use after the tissue plasminogen activator (tPA) treatment window has passed. The idea of using biomimetic nanoparticles in the future for the treatment of ischemic stroke through immunotherapy and stem cell therapy is highlighted, along with recent advancements in the study of nanomaterials for ischemic stroke diagnostics and treatment.

Advanced hydrogels: New expectation for the repair of organic erectile dysfunction

Organic erectile dysfunction (ED) is a type of sexual disorder in men that is usually associated with illness, surgical injury, normal aging and has a high incidence across the globe. And the essence of penile erection is a neurovascular event regulated by a combination of factors. Nerve and vascular injury are the main causes of erectile dysfunction. Currently, the main treatment options for ED include phosphodiesterase type 5 inhibitors (PDE5Is), intracorporeal injections and vacuum erection devices (VEDs), which are ineffective. Therefore, it is essential to find an emerging, non-invasive and effective treatment for ED. The histopathological damage causing ED can be improved or even reversed with hydrogels, in contrast to current therapies. Hydrogels have many advantages, they can be synthesized from various raw materials with different properties, possess a definite composition, and have good biocompatibility and biodegradability. These advantages make hydrogels an effective drug carrier. In this review, we began with an overview of the underlying mechanisms of organic erectile dysfunction, discussed the dilemmas of existing treatments for ED, and described the unique advantages of hydrogel over other approaches. Then emphasizing the progress of research on hydrogels in the treatment of ED.

Functional Skeletal Muscle Regeneration Using Muscle Mimetic Tissue Fabricated by Microvalve-Assisted Coaxial 3D Bioprinting

3D-printed artificial skeletal muscle, which mimics the structural and functional characteristics of native skeletal muscle, is a promising treatment method for muscle reconstruction. Although various fabrication techniques for skeletal muscle using 3D bio-printers are studied, it is still challenging to build a functional muscle structure. A strategy using microvalve-assisted coaxial 3D bioprinting in consideration of functional skeletal muscle fabrication is reported. The unit (artificial muscle fascicle: AMF) of muscle mimetic tissue is composed of a core filled with medium-based C2C12 myoblast aggregates as a role of muscle fibers and a photo cross-linkable hydrogel-based shell as a role of connective tissue in muscles that enhances printability and cell adhesion and proliferation. Especially, a microvalve system is applied for the core part with even cell distribution and strong cell-cell interaction. This system enhances myotube formation and consequently shows spontaneous contraction. A multi-printed AMF (artificial muscle tissue: AMT) as a piece of muscle is implanted into the anterior tibia (TA) muscle defect site of immunocompromised rats. As a result, the TA-implanted AMT responds to electrical stimulation and represents histologically regenerated muscle tissue. This microvalve-assisted coaxial 3D bioprinting shows a significant step forward to mimicking native skeletal muscle tissue.

3D bioprinting of emulating homeostasis regulation for regenerative medicine applications

Homeostasis is the most fundamental mechanism of physiological processes, occurring simultaneously as the production and outcomes of pathological procedures. Accompanied by manufacture and maturation of intricate and highly hierarchical architecture obtained from 3D bioprinting (three-dimension bioprinting), homeostasis has substantially determined the quality of printed tissues and organs. Instead of only shape imitation that has been the remarkable advances, fabrication for functionality to make artificial tissues and organs that act as real ones in vivo has been accepted as the optimized strategy in 3D bioprinting for the next several years. Herein, this review aims to provide not only an overview of 3D bioprinting, but also the main strategies used for homeostasis bioprinting. This paper briefly introduces the principles of 3D bioprinting system applied in homeostasis regulations firstly, and then summarizes the specific strategies and potential trend of homeostasis regulations using multiple types of stimuli-response biomaterials to maintain auto regulation, specifically displaying a brilliant prospect in hormone regulation of homeostasis with the most recently outbreak of vasculature fabrication. Finally, we discuss challenges and future prospects of homeostasis fabrication based on 3D bioprinting in regenerative medicine, hoping to further inspire the development of functional fabrication in 3D bioprinting.

Engineering microparticles based on solidified stem cell secretome with an augmented pro-angiogenic factor portfolio for therapeutic angiogenesis

Tissue (re)vascularization strategies face various challenges, as therapeutic cells do not survive long enough in situ, while the administration of pro-angiogenic factors is hampered by fast clearance and insufficient ability to emulate complex spatiotemporal signaling. Here, we propose to address these limitations by engineering a functional biomaterial capable of capturing and concentrating the pro-angiogenic activities of mesenchymal stem cells (MSCs).

In particular, dextran sulfate, a high molecular weight sulfated glucose polymer, supplemented to MSC cultures, interacts with MSC-derived extracellular matrix (ECM) components and facilitates their co-assembly and accumulation in the pericellular space. Upon decellularization, the resulting dextran sulfate-ECM hybrid material can be processed into MIcroparticles of SOlidified Secretome (MIPSOS). The insoluble format of MIPSOS protects protein components from degradation, while facilitating their sustained release. Proteomic analysis demonstrates that MIPSOS are highly enriched in pro-angiogenic factors, resulting in an enhanced pro-angiogenic bioactivity when compared to naïve MSC-derived ECM (cECM). Consequently, intravital microscopy of full-thickness skin wounds treated with MIPSOS demonstrates accelerated revascularization and healing, far superior to the therapeutic potential of cECM. Hence, the microparticle-based solidified stem cell secretome provides a promising platform to address major limitations of current therapeutic angiogenesis approaches.

•

Dextran sulfate assembles with mesenchymal stem cell secretome.

•

As a result, microparticles of solidified stem cell secretome (MIPSOS) are formed.

•

The insoluble MIPSOS format protects proteins from premature degradation.

•

MIPSOS are enriched in pro-angiogenic factors and exhibit gradual release kinetics.

•

MIPSOS demonstrate superior pro-angiogenic properties and thus therapeutic potential.

Electroconductive biomaterials for cardiac tissue engineering

Myocardial infarction (MI) is still the leading cause of mortality worldwide. The success of cell-based therapies and tissue engineering strategies for treatment of injured myocardium have been notably hindered due to the limitations associated with the selection of a proper cell source, lack of engraftment of engineered tissues and biomaterials with the host myocardium, limited vascularity, as well as immaturity of the injected cells. The first-generation approaches in cardiac tissue engineering (cTE) have mainly relied on the use of desired cells (e.g., stem cells) along with non-conductive natural or synthetic biomaterials for in vitro construction and maturation of functional cardiac tissues, followed by testing the efficacy of the engineered tissues in vivo. However, to better recapitulate the native characteristics and conductivity of the cardiac muscle, recent approaches have utilized electroconductive biomaterials or nanomaterial components within engineered cardiac tissues. This review article will cover the recent advancements in the use of electrically conductive biomaterials in cTE. The specific emphasis will be placed on the use of different types of nanomaterials such as gold nanoparticles (GNPs), silicon-derived nanomaterials, carbon-based nanomaterials (CBNs), as well as electroconductive polymers (ECPs) for engineering of functional and electrically conductive cardiac tissues. We will also cover the recent progress in the use of engineered electroconductive tissues for in vivo cardiac regeneration applications. We will discuss the opportunities and challenges of each approach and provide our perspectives on potential avenues for enhanced cTE. STATEMENT OF SIGNIFICANCE: Myocardial infarction (MI) is still the primary cause of death worldwide. Over the past decade, electroconductive biomaterials have increasingly been applied in the field of cardiac tissue engineering. This review article provides the readers with the leading advances in the in vitro applications of electroconductive biomaterials for cTE along with an in-depth discussion of injectable/transplantable electroconductive biomaterials and their delivery methods for in vivo MI treatment. The article also discusses the knowledge gaps in the field and offers possible novel avenues for improved cardiac tissue engineering.

Restoring Carboxylates on Highly Modified Alginates Improves Gelation, Tissue Retention and Systemic Capture

Alginate hydrogels are gaining traction for use in drug delivery, regenerative medicine, and as tissue engineered scaffolds due to their physiological gelation conditions, high tissue biocompatibility, and wide chemical versatility. Traditionally, alginate is decorated at the carboxyl group to carry drug payloads, peptides, or proteins. While low degrees of substitution do not cause noticeable mechanical changes, high degrees of substitution can cause significant losses to alginate properties including complete loss of calcium cross-linking. While most modifications used to decorate alginate deplete the carboxyl groups, we propose that alginate modifications that replenish the carboxyl groups could overcome the loss in gel integrity and mechanics. In this report, we demonstrate that restoring carboxyl groups during functionalization maintains calcium cross-links as well as hydrogel shear-thinning and self-healing properties. In addition, we demonstrate that alginate hydrogels modified to a high degree with azide modifications that restore the carboxyl groups have improved tissue retention at intramuscular injection sites and capture blood-circulating cyclooctynes better than alginate hydrogels modified with azide modifications that deplete the carboxyl groups. Taken together, alginate modifications that restore carboxyl groups could significantly improve alginate hydrogel mechanics for clinical applications. STATEMENT OF SIGNIFICANCE: Chemical modification of hydrogels provides a powerful tool to regulate cellular adhesion, immune response, and biocompatibility with local tissues. Alginate, due to its biocompatibility and easy chemical modification, is being explored for tissue engineering and drug delivery. Unfortunately, modifying alginate to a high degree of substitution consumes carboxyl group, which are necessary for ionic gelation, leading to poor hydrogel crosslinking. We introduce alginate modifications that restore the alginate's carboxyl groups. We demonstrate that modifications that reintroduce carboxyl groups restore gelation and improve gel mechanics and tissue retention. In addition to contributing to a basic science understanding of hydrogel properties, we anticipate our approach will be useful to create tissue engineered scaffolds and drug delivery platforms.

A smart injectable composite hydrogel with magnetic navigation and controlled glutathione release for promoting in situ chondrocyte array and self-healing in damaged cartilage tissue

Injectable cell-based hydrogels allow surgical operation in a minimally invasive way for articular cartilage lesions but the chondrocytes in the injectable hydrogels are difficultly arrayed and fixed at the site of interest to repair the cartilage tissue. In this study, an injectable hyaluronic acid-polyacrylic acid (HA-pAA) hydrogel was first synthesized using hyaluronic acid-cyclodextrin (HA-CD) and polyacrylic acid-ferrocene (pAA-Fc) to provide cell-delivery and self-healing. To promote the cell fixation and alignment, porous poly(lactic-co-glycolic acid) (PLGA) magnetic microcapsules (PPMMs) with glutathione (GSH) loaded and iron oxide nanoparticles (IO) located in the shell were designed. The GSH-loaded PPMMs with layer-by-layer (LbL) assembly of hyaluronic acid (HA) and GSH (LbL-PPMMs) can provide a two-stage rapid and slow release of GSH to modulate the self-healing of the HA-pAA hydrogel at the injured site. Furthermore, the chondrocytes embedded in the HA-pAA hydrogel could be delivered through CD44 receptors on the HA polymer chains of LbL-PPMMs toward the surface of the damaged site by an internal magnetic force. The composite hydrogel system of chondrocytes/LbL-PPMMs/HA-pAA can provide the damaged cartilage with a more even and smooth surface than other groups in a rabbit model after 8 weeks of implantation. In addition, the chondrocytes in the deep zone tissue exhibit a columnar array, similar to the cell arrangement in normal cartilage tissue. Together with the cell navigation behavior and GSH release from the LbL-PPMM/HA-pAA hydrogel, a full closure of lesions on the cartilage tissue can be achieved. Our results demonstrate the highly promising potential of the injectable LbL-PPMM/HA-pAA system in cartilage tissue repair.

Development of Injectable Hydroxyapatite/2-(dimethylamino)Ethyl Methacrylate/Polyvinylpyrrolidone Aqua-Hydrogel System to Repair of the Shoulder Joint Head for Hemiarthroplasty

This study aimed to develop osteogenic structure assembly for modular bone treatment presentations, effect of 2-(dimethylamino)ethyl methacrylate and polyvinyl pyrrolidone combination as cell adhesive molecule with hydroxyapatite-based composite as osteoconductive constituent was inspected on bone fracture repair. The prepared injectable composite hydrogel showed significantly improved mechanical stability. The ternary composite gel was characterized for functional group modifications and chemical interactions using Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Moreover, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analyses were performed to observe surface appearances of the hydrogel. The hydroxyapatite/2-(dimethylamino)ethyl methacrylate/poly-N-vinyl-2-pyrrolidone hydrogel played key role in supporting osteoblastic cell spread due to their bioactivity and strength abilities. The present findings revealed the significance of hydroxyapatite concentration on proliferation and osteogenic purpose of the cells. The developed performances of hydrogel have been improved cell proliferation and functions to repair bone fracture.

Formulation and Characterization of a New Injectable Bone Substitute Composed PVA/Borax/CaCO3 and Demineralized Bone Matrix

The occurrence of bone-related disorders and diseases has dramatically increased in recent years around the world. Demineralized bone matrix (DBM) has been widely used as a bone implant due to its osteoinduction and bioactivity. However, the use of DBM is limited because it is a particulate material, which makes it difficult to manipulate and implant with precision. In addition, these particles are susceptible to migration to other sites. To address this situation, DBM is commonly incorporated into a variety of carriers. An injectable scaffold has advantages over bone grafts or preformed scaffolds, such as the ability to flow and fill a bone defect. The aim of this research was to develop a DBM carrier with such viscoelastic properties in order to obtain an injectable bone substitute (IBS). The developed DBM carrier consisted of a PVA/glycerol network cross-linked with borax and reinforced with CaCO3 as a pH neutralizer, porosity generator, and source of Ca. The physicochemical properties were determined by an injectability test, FTIR, SEM, and TGA. Porosity, degradation, bioactivity, possible cytotoxic effect, and proliferation in osteoblasts were also determined. The results showed that the developed material has great potential to be used in bone tissue regeneration.

Advances in Injectable and Self-healing Polysaccharide Hydrogel Based on the Schiff Base Reaction

Injectable hydrogel possesses great application potential in disease treatment and tissue engineering, but damage to gel often occurs due to the squeezing pressure from injection devices and the mechanical forces from limb movement, and leads to the rapid degradation of gel matrix and the leakage of the load material. The self-healing injectable hydrogels can overcome these drawbacks via automatically repairing gel structural defects and restoring gel function. The polysaccharide hydrogels constructed through the Schiff base reaction own advantages including simple fabrication, injectability, and self-healing under physiological conditions, and therefore have drawn extensive attention and investigation recently. In this short review, the preparation and self-healing properties of the polysaccharide hydrogels that is established on the Schiff base reaction are focused on and their biological applications in drug delivery and cell therapy are discussed.

Therapeutic effects of chitosan in veterinary dermatology: A systematic review of the literature

Chitosan is a natural polysaccharide with biocompatibility, biodegradability, nontoxicity, antimicrobial, and hemostatic properties. This biopolymer has been used in different pharmaceutical forms; therefore, it has an attractive potential for dermal applications in veterinary medicine. The aim of this review is to assess the healing potential of chitosan, based on its dermatological effects on animals, to enrich the therapeutic options of veterinary clinicians. A systematic review was conducted based on the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) strategy, retrieving 1,032 studies and selecting 39 after the inclusion and exclusion criteria were applied. The studies included reports with confirmed positive effects (n = 46/99, 46.5 %) (P < 0.05), with positive effects (n = 49.5/99, 49.5 %), and with no effect (n = 4/99, 4 %); none of the studies reported adverse effects. There is an association between frequency of application and a decrease in healing time (P = 0.038); applying chitosan "every 48-72 hours" was the most recommended frequency (n = 10/19, 52.9 %). Chitosan, when applied to skin lesions on animals, produces positive effects on healing, potentially becoming a safe biomaterial for skin treatments in veterinary practice. As an initial protocol, we suggest applying chitosan every 48-72 hours for at least 2 weeks (7 applications).

Mussel-inspired agarose hydrogel scaffolds for skin tissue engineering

Polysaccharide hydrogels are widely used in tissue engineering because of their superior biocompatibility and low immunogenicity. However, many of these hydrogels are unrealistic for practical applications as the cost of raw materials is high, and the fabrication steps are tedious. This study focuses on the facile fabrication and optimization of agarose-polydopamine hydrogel (APG) scaffolds for skin wound healing. The first study objective was to evaluate the effects of polydopamine (PDA) on the mechanical properties, water holding capacity and cell adhesiveness of APG. We observed that APG showed decreased rigidity and increased water content with the addition of PDA. Most importantly, decreased rigidity translated into significant increase in cell adhesiveness. Next, the slow biodegradability and high biocompatibility of APG with the highest PDA content (APG3) was confirmed. In addition, APG3 promoted full-thickness skin defect healing by accelerating collagen deposition and promoting angiogenesis. Altogether, we have developed a straightforward and efficient strategy to construct functional APG scaffold for skin tissue engineering, which has translation potentials in clinical practice.

Release of VEGF and BMP9 from injectable alginate based composite hydrogel for treatment of myocardial infarction

Myocardial infarction (MI) is one of cardiovascular diseases that pose a serious threat to human health. The pathophysiology of MI is complex and contains several sequential phases including blockage of a coronary artery, necrosis of myocardial cells, inflammation, and myocardial fibrosis. Aiming at the treatment of different stages of MI, in this work, an injectable alginate based composite hydrogel is developed to load vascular endothelial active factor (VEGF) and silk fibroin (SF) microspheres containing bone morphogenetic protein 9 (BMP9) for releasing VEGF and BMP9 to realize their respective functions. The results of in vitro experiments indicate a rapid initial release of VEGF during the first few days and a relatively slow and sustained release of BMP9 for days, facilitating the formation of blood vessels in the early stage and inhibiting myocardial fibrosis in the long-term stage, respectively. Intramyocardial injection of such composite hydrogel into the infarct border zone of mice MI model via multiple points promotes angiogenesis and reduces the infarction size. Taken together, these results indicate that the dual-release of VEGF and BMP9 from the composite hydrogel results in a collaborative effect on the treatment of MI and improvement of heart function, showing a promising potential for cardiac clinical application.

Nanocurcumin and arginine entrapped injectable chitosan hydrogel for restoration of hypoxia induced endothelial dysfunction

Hypoxia is a condition that gradually leads to ischemic damages in organs which is marked by poor tissue perfusion. Depending on the severity of the condition, revascularisation therapies are needed for reducing the risk of organ dysfunction. This study was aimed at developing an injectable nanocurcumin and arginine incorporated chitosan hydrogel (nC/R) that can prevent hypoxia induced endothelial damage. The prepared hydrogel has shear thinning, stable and injectable nature. The (nC and nC/R) hydrogels showed significant antioxidant activity and biodegradation in vitro. The release of curucmin and arginine from the nC/R was found to be higher at acidic pH, which predominates in an ischemic site. To mimic low oxygen environment, an in vitro hypoxic endothelial dysfunction model was developed which showed decreased expressions of phosphorylated eNOS (serine 1177) when compared to the cells cultured in normoxic condition. In vitro tube formation assay demonstrated the protective effect of nC/R towards hypoxia induced reduction of tube width. The nC/R hydrogel was found to enhance phosphorylation of eNOS at serine 1177 site in cultured endothelial cells subjected to hypoxia. Therefore, nC/R hydrogel could effectively deliver both curcumin and arginine and therapeutically reduce the effect of hypoxia induced endothelial dysfunction.

Viscosity and degradation controlled injectable hydrogel for esophageal endoscopic submucosal dissection

Endoscopic submucosal dissection (ESD) is a common procedure to treat early and precancerous gastrointestinal lesions. Via submucosal injection, a liquid cushion is created to lift and separate the lesion and malignant part from the muscular layer where the formed indispensable space is convenient for endoscopic incision. Saline is a most common submucosal injection liquid, but the formed liquid pad lasts only a short time, and thus repeated injections increase the potential risk of adverse events. Hydrogels with high osmotic pressure and high viscosity are used as an alternate; however, with some drawbacks such as tissue damage, excessive injection resistance, and high cost. Here, we reported a nature derived hydrogel of gelatin-oxidized alginate (G-OALG). Based on the rheological analysis and compare to commercial endoscopic mucosal resection (EMR) solution (0.25% hyaluronic acid, HA), a designed G-OALG hydrogel of desired concentration and composition showed higher performances in controllable gelation and injectability, higher viscosity and more stable structures. The G-OALG gel also showed lower propulsion resistance than 0.25% HA in the injection force assessment under standard endoscopic instruments, which eased the surgical operation. In addition, the G-OALG hydrogel showed good in vivo degradability biocompatibility. By comparing the results acquired via ESD to normal saline, the G-OALG shows great histocompatibility and excellent endoscopic injectability, and enables create a longer-lasting submucosal cushion. All the features have been confirmed in the living both pig and rat models. The G-OALG could be a promising submucosal injection agent for esophageal ESD.

•

Injectable gel with controlled viscosity.

•

Injectable gel with controlled degradation.

•

Making esophageal submucosal liquid cushion.

•

Potential treatment for early esophageal cancer.

•

Big animal in-situ imaging.

Three-dimensional scaffold-free microtissues engineered for cardiac repair

Cardiovascular diseases, including myocardial infarction (MI), persist as the leading cause of mortality and morbidity worldwide. The limited regenerative capacity of the myocardium presents significant challenges specifically for the treatment of MI and, subsequently, heart failure (HF). Traditional therapeutic approaches mainly rely on limiting the induced damage or the stress on the remaining viable myocardium through pharmacological regulation of remodeling mechanisms, rather than replacement or regeneration of the injured tissue. The emerging alternative regenerative medicine-based approaches have focused on restoring the damaged myocardial tissue with newly engineered functional and bioinspired tissue units. Cardiac regenerative medicine approaches can be broadly categorized into three groups: cell-based therapies, scaffold-based cardiac tissue engineering, and scaffold-free cardiac tissue engineering. Despite significant advancements, however, the clinical translation of these approaches has been critically hindered by two key obstacles for successful structural and functional replacement of the damaged myocardium, namely: poor engraftment of engineered tissue into the damaged cardiac muscle and weak electromechanical coupling of transplanted cells with the native tissue. To that end, the integration of micro- and nanoscale technologies along with recent advancements in stem cell technologies have opened new avenues for engineering of structurally mature and highly functional scaffold-based (SB-CMTs) and scaffold-free cardiac microtissues (SF-CMTs) with enhanced cellular organization and electromechanical coupling for the treatment of MI and HF. In this review article, we will present the state-of-the-art approaches and recent advancements in the engineering of SF-CMTs for myocardial repair.

Poly(N-isopropylacrylamide)-based dual-crosslinking biohybrid injectable hydrogels for vascularization

Injectable hydrogels provide a powerful and non-invasive approach for numerous applications in cell transplantation, growth factor delivery, tissue regeneration and so forth. The properties of injectable hydrogels should be well-tuned for specific applications, where their overall design should ensure biocompatibility, non-toxicity, robust mechanical properties, and most importantly the ability to promote vascularization and integration with the host tissue/organ. Among these criteria, vascularization remains a key design element in the development of functional therapeutic hydrogels for successful translation into clinical settings. To that end, there is still a critical need for the development of the next generation of injectable hydrogels with precisely tuned biophysical and biochemical properties which could simultaneously promote tissue vascularization. In this work, we developed a temperature responsive, dual-crosslinking, biohybrid hydrogels, modified with a vasculogenic peptide for applications in regenerative medicine, specifically tissue vascularization. The synthesized hydrogels consisted of poly(N-isopropylacrylamide)-based copolymer, functionalized gelation and angiogenic VEGF-mimetic QK peptide with enhanced shear-thinning and injectability properties. QK peptide is a VEGF-mimetic vasculogenic peptide which binds to VEGF receptors and activates intercellular pathway for vascularization. Apart from the presence of QK peptide, the mechanical properties of the hydrogels were precisely tuned by altering the polymer concentration, enabling successful assembly and endothelial cell network formation. Extended in vitro studies demonstrated successful encapsulation and homogeneous distribution of endothelial cells within the three-dimensional (3D) environment of the hydrogel matrix with significantly enhanced vascularization in presence of the QK peptide as early as 3 days of culture. A small, preliminary in vivo study in mice showed a trend of increased blood vessel formation in hydrogels that incorporated the QK peptide. Overall, our study presents the design and characterization of injectable, dual-crosslinking and vasculogenic hydrogels with controlled properties which could be utilized for numerous applications in regenerative medicine, minimally invasive cell and drug delivery as well as fundamental studies on tissue vascularization and angiogenesis. STATEMENT OF SIGNIFICANCE: In this work, we synthesized a new class of temperature responsive, dual-crosslinking, biohybrid injectable hydrogels with enhanced vascularization properties for broad applications in regenerative medicine and minimally invasive cell/drug delivery. The developed hydrogels properly accommodated 3D culture, assembly and network formation of endothelial cells, as evidenced by in vitro and in vivo studies.

Nanocomposite Gel as Injectable Therapeutic Scaffold: Microstructural Aspects and Bioactive Properties

The development of tissue scaffolds able to provide proper and accelerated regeneration of tissue is a main task of tissue engineering. We developed a nanocomposite gel that may be used as an injectable therapeutic scaffold. The nanocomposite gel is based on biocompatible gelling agents with embedded nanoparticles (iron oxide, silver, and hydroxyapatite) providing therapeutic properties. We have investigated the microstructure of the nanocomposite gel exposed to different substrates (porous materials and biological tissue). Here we show that the nanocomposite gel has the ability to self-reassemble mimicking the substrate morphology: exposition on porous mineral substrate caused reassembling of nanocomposite gel into 10× smaller scale structure; exposition to a section of humerus cortical bone decreased the microstructure scale more than twice (to ≤3 μm). The reassembling happens through a transitional layer which exists near the phase separation boundary. Our results impact the knowledge of gels explaining their abundance in biological organisms from the microstructural point of view. The results of our biological experiments showed that the nanocomposite gel may find diverse applications in the biomedical field.

The effects of Berberis vulgaris consumption on plasma levels of IGF-1, IGFBPs, PPAR-γ and the expression of angiogenic genes in women with benign breast disease: a randomized controlled clinical trial

BACKGROUND

The present study was designed to investigate the effects of Berberis vulgaris (BV) juice consumption on plasma levels of insulin-like growth factor (IGF-1), IGF-binding proteins (IGFBPs), and the expression of PPAR-γ, VEGF and HIF in women with benign breast disease.

METHODS

This parallel design randomized, double-blind controlled clinical trial was conducted on 85 eligible patients diagnosed with benign breast disease. They were assigned randomly into either BV juice group (n = 44, BV juice: 480 ml/day) or placebo group (n = 41, BV placebo juice: 480 ml/day) for 8 weeks intervention. Participants, caregivers and those who assessed laboratory analyses were blinded to the assignments. Plasma levels of biomarkers were measured at baseline and after 8 weeks by ELISA. Quantitative real-time PCR was used to measure the fold change in the expression of each interested gene.

RESULTS

The compliance of participants was 95.2% and 40 available subjects analyzed in each group at last. Relative treatment (RT) effects for BV juice caused 16% fall in IGF-1 concentration and 37% reduction in the ratio of IGF-1/1GFBP1. Absolute treatment effect expressed 111 ng/ml increased mean differences of IGFBP-3 between BV group and placebo. Plasma level of PPAR-γ increased in both groups but it was not significant. Fold changes in the expressions of PPAR-γ, VEGF and HIF showed down-regulation in the intervention group compared to placebos (P < 0.05).

CONCLUSIONS

The BV juice intervention over 8 weeks was accompanied by acceptable efficacy and decreased plasma IGF-1, and IGF-1/IGFBP-1 ratio partly could be assigned to enhanced IGFBP-1 level in women with BBD. The intervention caused reductions in the expression levels of PPAR, VEGF, and HIF which are remarkable genomic changes to potentially prevent breast tumorigenesis.

TRIAL REGISTRATION

IRCT2012110511335N2. Registered 10 July 2013 (retrospectively registered).

Photoresponsive Delivery Microcarriers for Tissue Defects Repair

Intelligent responsive microcarriers have emerged as a promising class of biomaterials for therapeutic delivery and tissue regeneration, since they can respond to external stimuli and release the loaded drugs in an active manner. Among various available stimuli, near-infrared (NIR) light is particularly attractive because it can penetrate biotic tissues with sufficient intensity and minimal damage. In this work, a kind of photoresponsive delivery microcarriers (PDMs) is developed using microfluidics. The microcarriers consist of NIR-absorbing graphene oxide, thermosensitive poly(N-isopropylacrylamide), and biocompatible gelatin methacrylate. Under NIR light, the PDMs exhibit an evident volume shrinkage and effectively trigger the drug release. After the NIR light is switched off, the shrunken microcarriers return to their original size. This reversible process can be stably repeated for many cycles. An in vitro experiment demonstrates that the NIR-radiated PDMs can actively release vascular endothelial growth factors and improve the tube formation of human umbilical vein endothelial cells. The results from the in vivo experiment also show an obvious photothermal effect and superior therapeutic efficacy of these PDMs in a rat model of tissue defects. These features make the PDMs an excellent drug delivery system and represent a great potential for clinical applications in tissue repair.

Injectable Hydrogels for Cancer Therapy over the Last Decade

The interest in injectable hydrogels for cancer treatment has been significantly growing over the last decade, due to the availability of a wide range of starting polymer structures with tailored features and high chemical versatility. Many research groups are working on the development of highly engineered injectable delivery vehicle systems suitable for combined chemo-and radio-therapy, as well as thermal and photo-thermal ablation, with the aim of finding out effective solutions to overcome the current obstacles of conventional therapeutic protocols. Within this work, we have reviewed and discussed the most recent injectable hydrogel systems, focusing on the structure and properties of the starting polymers, which are mainly classified into natural or synthetic sources. Moreover, mapping the research landscape of the fabrication strategies, the main outcome of each system is discussed in light of possible clinical applications.

Engineering Functional Cardiac Tissues for Regenerative Medicine Applications

PURPOSE OF REVIEW

Tissue engineering has expanded into a highly versatile manufacturing landscape that holds great promise for advancing cardiovascular regenerative medicine. In this review, we provide a summary of the current state-of-the-art bioengineering technologies used to create functional cardiac tissues for a variety of applications in vitro and in vivo.

RECENT FINDINGS

Studies over the past few years have made a strong case that tissue engineering is one of the major driving forces behind the accelerating fields of patient-specific regenerative medicine, precision medicine, compound screening, and disease modeling. To date, a variety of approaches have been used to bioengineer functional cardiac constructs, including biomaterial-based, cell-based, and hybrid (using cells and biomaterials) approaches. While some major progress has been made using cellular approaches, with multiple ongoing clinical trials, cell-free cardiac tissue engineering approaches have also accomplished multiple breakthroughs, although drawbacks remain. This review summarizes the most promising methods that have been employed to generate cardiovascular tissue constructs for basic science or clinical applications. Further, we outline the strengths and challenges that are inherent to this field as a whole and for each highlighted technology.

Rapid and efficient in vivo angiogenesis directed by electro-assisted bioprinting of alginate/collagen microspheres with human umbilical vein endothelial cell coating layer

Rapid reconstruction of functional microvasculature is the urgent challenge of regenerative medicine and ischemia therapy development. The purpose of this study was to provide an alternative solution for obtaining functional blood vessel networks in vivo, through assessing whether hydrogel-based microspheres coated by human umbilical vein endothelial cells (HUVECs) can direct rapid and efficient in vivo angiogenesis without the addition of exogenous growth factors or other supporting cells. Uniform alginate microspheres with adjustable diameter were biofabricated by electro-assisted bioprinting technology. Collagen fibrils were evenly coated on the surface of alginate microspheres through simple self-assembly procedure, and collagen concentration is optimized to achieve the highest HUVECs adhesion and proliferation. Immunofluorescence staining and gene analysis confirmed the formation of the prevascularized tubular structure and significantly enhanced endothelial gene expression. HUVECs-coated hydrogel microspheres with different diameters were subcutaneously injected in immune-deficient mice, which demonstrated rapid blood vessel regeneration and functional anastomosis with host blood vessels within 1 week. Besides, microsphere diameter demonstrated influence on blood vessel density with statistical differences but showed no obvious influence on the area occupied by blood vessels. This study provided a powerful tool for rapid and minimal-invasion angiogenesis of bioprinting constructs and a potential method for vascularized tissue regeneration and ischemia treatment with clinically relevant dimensions.

Advances in injectable self-healing biomedical hydrogels

In recent years, implantable biomaterials have attracted significant interest owing to their potentials for use in the therapy of physical defects and traumas. Among the implantable biomaterials, hydrogels have received increasing attention for their tunable structures and good rheological behavior. However, the mechanical failures of traditional gel materials during normal operation remain a serious issue. To overcome this problem, hydrogel materials with self-healing and injectable abilities have been developed, with their potential for autonomous self-recovery and minimally invasive implantation. In this paper, the progress of injectable self-healing hydrogels is presented by combining developments in the fundamental knowledge of polymer designs and discussions on the practical biomedical applications of the materials. The mechanisms of different types of self-healing hydrogels are introduced first and their performances are then discussed, followed by a review of the self-healing hydrogels with injectability. The applications of the injectable self-healing hydrogels are discussed in the final section. STATEMENT OF SIGNIFICANCE: This paper provides an overview of the progress of a smart material, injectable self-healing hydrogel, during the past ten years and mainly focuses on its recent development. This paper presents developments in the fundamental knowledge in polymer designs and discussions on the practical biomedical application of the materials, which sheds more light on the advancement of injectable self-healing hydrogels. This paper should be of interest to the readers who are curious about the advances of injectable self-healing hydrogels.

Combining Stem Cells and Biomaterial Scaffolds for Constructing Tissues and Cell Delivery

Combining stem cells with biomaterial scaffolds serves as a promising strategy for engineering tissues for both in vitro and in vivo applications. This updated review details commonly used biomaterial scaffolds for engineering tissues from stem cells. We first define the different types of stem cells and their relevant properties and commonly used scaffold formulations. Next, we discuss natural and synthetic scaffold materials typically used when engineering tissues, along with their associated advantages and drawbacks and gives examples of target applications. New approaches to engineering tissues, such as 3D bioprinting, are described as they provide exciting opportunities for future work along with current challenges that must be addressed. Thus, this review provides an overview of the available biomaterials for directing stem cell differentiation as a means of producing replacements for diseased or damaged tissues.