Advanced protein adsorption properties of a novel silicate-based bioceramic: A proteomic analysis

Fn-HMGB1 Adsorption Behavior Initiates Early Immune Recognition and Subsequent Osteoinduction of Biomaterials

Implantable biomaterials are widely used in bone tissue engineering, but little is still known about how they initiate early immune recognition and the initial dynamics. Herein, the early immune recognition and subsequent osteoinduction of biphasic calcium phosphate (BCP) after implantation to the protein adsorption behavior is attributed. By liquid chromatography tandem mass spectrometry (LC-MS/MS) analysis, the biomaterial-related molecular patterns (BAMPs) formed after BCP implantation are mapped, dominated by the highly expressed extracellular matrix protein fibronectin (Fn) and the high mobility group box 1 (HMGB1). Molecular dynamics simulations show that Fn has the ability to bind more readily to the BCP surface than HMGB1. The preferential binding of Fn provides a higher adsorption energy for HMGB1. Furthermore, multiple hydrogen bonding sites between HMGB1 and Fn are demonstrated using a molecular docking approach. Ultimately, the formation of BAMPs through HMGB1 antagonist glycyrrhizic acid (GA), resulting in impaired immune recognition of myeloid differentiation factor 88 (MYD88) mediated dendritic cells (DCs) and macrophages (Mφs), as well as failed osteoinduction processes is obstructed. This study introduces a mechanism for early immune recognition of implant materials based on protein adsorption, providing perspectives for future design and application of tissue engineering materials.

Triple-layered scaffold containing cisplatin and curcumin applied for cancerous bone regeneration

Novel drug delivery system was prepared and evaluated as for application in cancerous bone treatment. It had three stacked layers, including a drug-free layer, a cisplatin-loaded layer, and a curcumin-containing layer. Our previously characterized biomaterials, namely Zr-hydroxyapatite (Zr-HA) and alkaline-treated polycaprolactone (modified-PCL), were used as major components of the drug carrier. Polar-polar interactions between cisplatin and Zr-HA were modulated by the modified-PCL included, leading to increase of cisplatin release. Using β-cyclodextrin (β-CD) to entrap curcumin caused improvement of curcumin solubility and release. The 3D-construct was porous with internal interconnected pores according to SEM micrographs. Large amount of apatite was formed and proteins adsorbed on the scaffolds after immersed in physiologic buffer solution and in medium containing fetal bovine serum, respectively. Optimal concentrations of ascorbic acid and triamcinolone were used for induction of bone marrow stromal cells to become osteoblasts by expressing an enzyme marker, e.g., alkaline phosphatase. The prepared scaffolds were considered osteo-conductive and osteo-inductive. The concentrations of cisplatin and curcumin reached the IC50 of SK-ES-1 cells of osteosarcoma and MCF-7 cells of breast adenocarcinoma after 24 h and 3 days of release, respectively. These cancer cells were more sensitive to the combined cisplatin and curcumin than each of the drugs. Regeneration of new bone and execution of residential cancer cells in defected bone were proposed after replacing the lost bone by this established drug carrier. The assumption needs to be verified in the future using animal models.

Cellular Response to Bone Morphogenetic Proteins-2 and -7 Covalently Bound to Photocrosslinked Heparin-Diazoresin Multilayer

Despite the plethora of research that exists on recombinant human bone morphogenetic protein-2 and -7 (rhBMP-2 and rhBMP-7) and has been clinically approved, there is still a need to gain information that would allow for their more rational use in bone implantology. The clinical application of supra-physiological dosages of these superactive molecules causes many serious adverse effects. At the cellular level, they play a role in osteogenesis and cellular adhesion, migration, and proliferation around the implant. Therefore, in this work, we investigated the role of the covalent binding of rhBMP-2 and rhBMP-7 separately and in combination with ultrathin multilayers composed of heparin and diazoresin in stem cells. In the first step, we optimized the protein deposition conditions via quartz crystal microbalance (QCM). Then, atomic force microscopy (AFM) and enzyme-linked immunosorbent assay (ELISA) were used to analyze protein-substrate interactions. The effect of the protein binding on the initial cell adhesion, migration, and short-term expression of osteogenesis markers was tested. In the presence of both proteins, cell flattening and adhesion became more prominent, resulting in limited motility. However, the early osteogenic marker expression significantly increased compared to the single protein systems. The presence of single proteins resulted in the elongation of cells, which promoted their migration activity.

Calcium Phosphate Silicate Microspheres with Soybean Lecithin as a Sustained-Release Bone Morphogenetic Protein-Delivery System for Bone Tissue Regeneration

Bone morphogenetic protein (BMP) is a growth factor that effectively promotes osteogenesis. Microsphere-based drug-delivery systems can facilitate an increase in the local concentration of BMP, thus promoting bone formation. In this study, calcium phosphate silicate (CPS) microspheres were used as drug-loading systems for BMP. Three groups─CPS, CPS + BMP, and CPS + BMP + soy lecithin (SL)─were set up, where SL was used to prolong the osteogenic effect of the microsphere system. Bone marrow mesenchymal stem cells and femoral defects in rats were used to compare the osteogenic ability of the three groups. The results indicated that CPS microspheres were good carriers of BMP, facilitating a smoother release into the cells and tissues. SL loading improved the loading rate of BMP, which promoted the osteogenic effect of the microspheres with BMP. We propose CPS microspheres as potential drug-delivery systems that can be effectively used in the treatment of bone defects.

Protein adsorption by nanomechanical mass spectrometry: Beyond the real-time molecular weighting

During past decades, enormous progress in understanding the mechanisms of the intermolecular interactions between the protein and surface at the single-molecule level has been achieved. These advances could only be possible by the ongoing development of highly sophisticated experimental methods such as atomic force microscopy, optical microscopy, surface plasmon resonance, ellipsometry, quartz crystal microbalance, conventional mass spectrometry, and, more recently, the nanomechanical systems. Here, we highlight the main findings of recent studies on the label-free single-molecule (protein) detection by nanomechanical systems including those focusing on the protein adsorption on various substrate surfaces. Since the nanomechanical techniques are capable of detecting and manipulating proteins even at the single-molecule level, therefore, they are expected to open a new way of studying the dynamics of protein functions. It is noteworthy that, in contrast to other experimental methods, where only given protein properties like molecular weight or protein stiffness can be determined, the nanomechanical systems enable a real-time measurement of the multiple protein properties (e.g., mass, stiffness, and/or generated surface stress), making them suitable for the study of protein adsorption mechanisms. Moreover, we also discuss the possible future trends in label-free detection and analysis of dynamics of protein complexes with these nanomechanical systems.

Complementary and Synergistic Design of Bi-Layered Double Hydroxides Modified Magnesium Alloy toward Multifunctional Orthopedic Implants

Magnesium (Mg)-based alloys have been regarded as promising implants for future clinic orthopedics, however, how to endow them with good anti-corrosion and biofunctions still remains a great challenge, especially for complicated bone diseases. Herein, three transition metals (M = Mn, Fe, and Co)-containing layered double hydroxides (LDH) (LDH-Mn, LDH-Fe, and LDH-Co) with similar M content are prepared on Mg alloy via a novel two-step method, then systematic characterizations and comparisons are conducted in detail. Results showed that LDH-Mn exhibited the best corrosion resistance, LDH-Mn and LDH-Co possessed excellent photothermal and enzymatic activities, LDH-Fe revealed better cytocompatibility and antibacterial properties, while LDH-Co demonstrated high cytotoxicity. Based on these results, an optimized bilayer LDH coating enriched with Fe and Mn (LDH-MnFe) from top to bottom have been designed for further in vitro and in vivo analysis. The top Fe-riched layer provided biocompatibility and antibacterial properties, while the bottom Mn-riced layer provided excellent anti-corrosion, photothermal and enzymatic effects. In addition, the released Mg, Fe, and Mn ions have a positive influence on angiogenesis and osteogenesis. Thus, the LDH-MnFe showed complementary and synergistic effects on anti-corrosion and multibiofunctions (antibacteria, antitumor, and osteogenesis). The present work offers a novel multifunctional Mg-based implant for treating bone diseases.

Interactive effects of cerium and copper to tune the microstructure of silicocarnotite bioceramics towards enhanced bioactivity and good biosafety

Endowing biomaterials with functional elements enhances their biological properties effectively. However, improving bioactivity and biosafety simultaneously is still highly desirable. Herein, cerium (Ce) and copper (Cu) are incorporated into silicocarnotite (CPS) to modulate the constitution and microstructure for degradability, bioactivity and biosafety regulation. Our results demonstrated that introducing Ce suppressed scaffold degradation, while, co-incorporation of both Ce and Cu accelerated degradability. Osteogenic effect of CPS in vitro was promoted by Ce and optimized by Cu, and Ce-induced angiogenic inhibition could be mitigated by cell coculture method and reversed by Ce-Cu co-incorporation. Ce enhanced osteogenic and angiogenic properties of CPS in a dose-dependent manner in vivo, and Cu-Ce coexistence exhibited optimal bioactivity and satisfactory biosafety. This work demonstrated that coculture in vitro was more appropriately reflecting the behavior of implanted biomaterials in vivo. Interactive effects of multi-metal elements were promising to enhance bioactivity and biosafety concurrently. The present work provided a promising biomaterial for bone repair and regeneration, and offered a comprehensive strategy to design new biomaterials which aimed at adjustable degradation behavior, and enhanced bioactivity and biosafety.

Nanotopography Sequentially Mediates Human Mesenchymal Stem Cell-Derived Small Extracellular Vesicles for Enhancing Osteogenesis

Engineered small extracellular vesicles (sEVs) are used as tools to enhance therapeutic efficacy. However, such application of sEVs is associated with several issues, including high costs and a high risk of tumorigenesis. Nanotopography has a greater influence on bone-related cell behaviors. However, whether nanotopography specifically mediate sEV content to perform particular biological functions remains unclear. Here, we demonstrate that selective nanotopography may be used to sequentially mediate human bone mesenchymal stem cell (hBMSC) sEVs to enhance the therapeutic efficacy of hBMSCs-EVs for osteogenesis. We subjected sEVs harvested from hBMSCs cultured on polished titanium plates (Ti) or nanotopographical titanium plates (Ti4) after 7, 14, and 21 d for RNA sequencing, and we found that there was no significant difference in sEV-miRNA expression after 7 d. Differentially expressed osteogenic-related microRNAs were founded after 14 days, and KEGG analysis indicated that the main microRNAs were associated with osteogenesis-related pathways, such as TGF-beta, AMPK, and FoxO. A significant difference was found in sEV-miRNAs expression after 21 d. We loaded sEV secreted from hBMSCs cultured on Ti4 after 21 d on 3D-printed porous PEEK scaffolds with poly dopamine (PDA) and found that such scaffolds showed superior osteogenic ability after 6- and 12-weeks. Here, we demonstrate the alkali- and heat-treated nanotopography with the ability of stimulating osteogenic differentiation of hBMSC can induce the secretion of pro-osteogenesis sEV, and we also found that sEVs meditate osteogenesis through miRNA. Thus, whether nanotopography has the ability to regulate other contents of sEVs such as proteins for enhancing osteogenesis needs further research. These findings may help us use nanotopography to extract sEVs for other biomedical applications, including cancer therapy.

The effects of a 3D-printed magnesium-/strontium-doped calcium silicate scaffold on regulation of bone regeneration via dual-stimulation of the AKT and WNT signaling pathways

Numerous studies have demonstrated that calcium silicate (CS) can be doped with various trace metal elements such as strontium (Sr) or magnesium (Mg). These studies have confirmed that such modifications promote bone regeneration. However, the development and emergence of 3D printing have further made it possible to fabricate bone grafts with precise structural designs using multi-bioceramics so as to better suit specific clinical requirements. We fabricated scaffolds using Mg-doped CS as the outer layer with Sr-doped CS in the center. In addition, PCL was used to improve printability of the scaffolds. This enhanced Mg and Sr architecture prevented premature degradation of the scaffolds during immersion while enabling the release of ions in a sustained manner in order to achieve the desired therapeutic goals. Even the capabilities of stem cells were shown to be enhanced when cultured on these scaffolds. Furthermore, the hybrid scaffolds were found to up-regulate the expression of bone-related proteins such as factors leading to differentiation-inducing pathways, including PI3K/Akt, Wnt, and TRPM7. The in vivo performance of the proposed scaffolds was assessed using micro-CT. The histological results revealed that the hybrid scaffolds were able to further enhance bone regeneration as compared to uni-bioceramics. By combining 3D printing, multi-ceramics, and trace metal elements, a novel hybrid scaffold could be fabricated with ease and specifically suited to future bone tissue engineering applications.

Double-edged effects caused by magnesium ions and alkaline environment regulate bioactivities of magnesium-incorporated silicocarnotite in vitro

Magnesium (Mg) is an important element for its enhanced osteogenic and angiogenic properties in vitro and in vivo, however, the inherent alkalinity is the adverse factor that needs further attention. In order to study the role of alkalinity in regulating osteogenesis and angiogenesis in vitro, magnesium-silicocarnotite [Mg-Ca₅(PO₄)₂SiO₄, Mg-CPS] was designed and fabricated. In this study, Mg-CPS showed better osteogenic and angiogenic properties than CPS within 10 wt.% magnesium oxide (MgO), since the adversity of alkaline condition was covered by the benefits of improved Mg ion concentrations through activating Smad2/3-Runx2 signaling pathway in MC3T3-E1 cells and PI3K-AKT signaling pathway in human umbilical vein endothelial cells in vitro. Besides, provided that MgO was incorporated with 15 wt.% in CPS, the bioactivities had declined due to the environment consisting of higher-concentrated Mg ions, stronger alkalinity and lower Ca/P/Si ions caused. According to the results, it indicated that bioactivities of Mg-CPS in vitro were regulated by the double-edged effects, which were the consequence of Mg ions and alkaline environment combined. Therefore, if MgO is properly incorporated in CPS, the improved bioactivities could cover alkaline adversity, making Mg-CPS bioceramics promising in orthopedic clinical application for its enhancement of osteogenesis and angiogenesis in vitro.

Therapeutic Effects of the Addition of Fibroblast Growth Factor-2 to Biodegradable Gelatin/Magnesium-Doped Calcium Silicate Hybrid 3D-Printed Scaffold with Enhanced Osteogenic Capabilities for Critical Bone Defect Restoration

Worldwide, the number of bone fractures due to traumatic and accidental injuries is increasing exponentially. In fact, repairing critical large bone defects remains challenging due to a high risk of delayed union or even nonunion. Among the many bioceramics available for clinical use, calcium silicate-based (CS) bioceramics have gained popularity due to their good bioactivity and ability to stimulate cell behavior. In order to improve the shortcomings of 3D-printed ceramic scaffolds, which do not easily carry growth factors and do not provide good tissue regeneration effects, the aim of this study was to use a gelatin-coated 3D-printed magnesium-doped calcium silicate (MgCS) scaffold with genipin cross-linking for regulating degradation, improving mechanical properties, and enhancing osteogenesis behavior. In addition, we consider the effects of fibroblast growth factor-2 (FGF-2) loaded into an MgCS scaffold with and without gelatin coating. Furthermore, we cultured the human Wharton jelly-derived mesenchymal stem cells (WJMSC) on the scaffolds and observed the biocompatibility, alkaline phosphatase activity, and osteogenic-related markers. Finally, the in vivo performance was assessed using micro-CT and histological data that revealed that the hybrid bioscaffolds were able to further achieve more effective bone tissue regeneration than has been the case in the past. The above results demonstrated that this type of processing had great potential for future clinical applications and studies and can be used as a potential alternative for future bone tissue engineering research, as well as having good potential for clinical applications.

Bone tissue regeneration: The role of finely tuned pore architecture of bioactive scaffolds before clinical translation

Spatial dimension of pores and interconnection in macroporous scaffolds is of particular importance in facilitating endogenous cell migration and bone tissue ingrowth. However, it is still a challenge to widely tune structure parameters of scaffolds by conventional methods because of inevitable pore geometrical deformation and poor pore interconnectivity. Here, the long-term in vivo biological performances of nonstoichiometric bioceramic scaffolds with different pore dimensions were assessed in critical-size femoral bone defect model. The 6% Mg-substituted wollastonite (CSi-Mg6) powders were prepared via wet-chemical precipitation and the scaffolds elaborately printed by ceramic stereolithography, displaying designed constant pore strut and tailorable pore height (200, 320, 450, 600 μm), were investigated thoroughly in the bone regeneration process. Together with detailed structural stability and mechanical properties were collaboratively outlined. Both μCT and histological analyses indicated that bone tissue ingrowth was retarded in 200 μm scaffolds in the whole stage (2-16 weeks) but the 320 μm scaffolds showed appreciable bone tissue in the center of porous constructs at 6-10 weeks and matured bone tissue were uniformly invaded in the whole pore networks at 16 weeks. Interestingly, the neo-tissue ingrowth was facilitated in the 450 μm and 600 μm scaffolds after 2 weeks and higher extent of bone regeneration and remodeling at the later stage. These new findings provide critical information on how engineered porous architecture impact bone regeneration in vivo. Simultaneously, this study shows important implications for optimizing the porous scaffolds design by advanced additive manufacture technique to match the clinical translation with high performance.