High efficacy of tetra-PEG hydrogel sealants for sutureless dural closure

Adhesive and biodegradable polymer mixture composed of high -biosafety pharmaceutical excipients as non-setting periodontal dressing

Periodontal dressing is a surgical dressing applied to oral wounds after periodontal surgery. Currently, all commercially available setting periodontal dressings are stiff, uncomfortable, with poor aesthetics, and need to be removed at the patient's follow-up visit, which may cause secondary damage. A periodontal dressing with soft texture, biodegradable properties, and that could balance both comfort and aesthetics is urgently desired. Hence, non-setting and degradable dressings were developed using sodium carboxymethyl cellulose, Eudragit S 100 and povidone K30, which were compared with the commercial degradable dressing Reso-pac®. The mucosal adhesion of the dressings was evaluated by lap shear tests, which indicated adequate adhesion. The in vitro swelling rates of the dressings were approximately half that of Reso-pac®, which led to less saliva adsorption and better dimensional stability. The dressings also exhibited satisfactory biocompatibility according to the results of CCK-8, Live/Dead staining, hemolysis, and subcutaneous implantation assays. Moreover, the dressing promoted the healing of full-thickness mucosal wounds in the palatal gingivae of SD rats and contributed to better therapeutic effect than Reso-pac®. Considering the multiple advantages and the pure pharmaceutical excipient formula, we anticipate that this dressing could be a promising product and may enter clinical practice in the near future.

Robust but On-Demand Detachable Wet Tissue Adhesive Hydrogel Enhanced with Modified Tannic Acid

Adhesives with robust but readily detachable wet tissue adhesion are of great significance for wound closure. Polyelectrolyte complex adhesive (PECA) is an important wet tissue adhesive. However, its relatively weak cohesive and adhesive strength cannot satisfy clinical applications. Herein, modified tannic acid (mTA) with a catechol group, a long alkyl hydrophobic chain, and a phenyl group was prepared first, and then, it was mixed with acrylic acid (AA) and polyethylenimine (PEI), followed by UV photopolymerization to make a wet tissue adhesive hydrogel with tough cohesion and adhesion strength. The hydrogel has a strong wet tissue interfacial toughness of ∼1552 J/m2, good mechanical properties (∼7220 kPa cohesive strength, ∼873% strain, and ∼33,370 kJ/m3 toughness), and a bursting pressure of ∼1575 mmHg on wet porcine skin. The hydrogel can realize quick and effective adhesion to various wet biological tissues including porcine skin, liver, kidney, and heart and can be changed easily with triggering urea solution to avoid tissue damage or uncomfortable pain to the patient. This biosafe adhesive hydrogel is very promising for wound closure and may provide new ideas for the design of robust wet tissue adhesives.

Flexible Fabrication and Hybridization of Bioactive Hydrogels with Robust Osteogenic Potency

Osteogenic scaffolds reproducing the natural bone composition, structures, and properties have represented the possible frontier of artificially orthopedic implants with the great potential to revolutionize surgical strategies against the bone-related diseases. However, it is difficult to achieve an all-in-one formula with the simultaneous requirement of favorable biocompatibility, flexible adhesion, high mechanical strength, and osteogenic effects. Here in this work, an osteogenic hydrogel scaffold fabricated by inorganic-in-organic integration between amine-modified bioactive glass (ABG) nanoparticles and poly(ethylene glycol) succinimidyl glutarate-polyethyleneimine (TSG-PEI) network was introduced as an all-in-one tool to flexibly adhere onto the defective tissue and subsequently accelerate the bone formation. Since the N-hydroxysuccinimide (NHS)-ester of tetra-PEG-SG polymer could quickly react with the NH2-abundant polyethyleneimine (PEI) polymer and ABG moieties, the TSG-PEI@ABG hydrogel was rapidly formed with tailorable structures and properties. Relying on the dense integration between the TSG-PEI network and ABG moieties on a nano-scale level, this hydrogel expressed powerful adhesion to tissue as well as durable stability for the engineered scaffolds. Therefore, its self-endowed biocompatibility, high adhesive strength, compressive modulus, and osteogenic potency enabled the prominent capacities on modulation of bone marrow mesenchymal stem cell (BMSCs) proliferation and differentiation, which may propose a potential strategy on the simultaneous scaffold fixation and bone regeneration promotion for the tissue engineering fields.

Fabrication of Injectable Kartogenin-Conjugated Composite Hydrogel with a Sustained Drug Release for Cartilage Repair

Cartilage tissue engineering has attracted great attention in defect repair and regeneration. The utilization of bioactive scaffolds to effectively regulate the phenotype and proliferation of chondrocytes has become an elemental means for cartilage tissue regeneration. On account of the simultaneous requirement of mechanical and biological performances for tissue-engineered scaffolds, in this work we prepared a naturally derived hydrogel composed of a bioactive kartogenin (KGN)-linked chitosan (CS-KGN) and an aldehyde-modified oxidized alginate (OSA) via the highly efficient Schiff base reaction and multifarious physical interactions in mild conditions. On the basis of the rigid backbones and excellent biocompatibility of these two natural polysaccharides, the composite hydrogel demonstrated favorable morphology, easy injectability, good mechanical strength and tissue adhesiveness, low swelling ratio, long-term sustainable KGN release, and facilitated bone marrow mesenchymal stem cell activity, which could simultaneously provide the mechanical and biological supports to promote chondrogenic differentiation and repair the articular cartilage defects. Therefore, we believe this work can offer a designable consideration and potential alternative candidate for cartilage and other soft tissue implants.

In situ-formable, dynamic crosslinked poly(ethylene glycol) carrier for localized adeno-associated virus infection and reduced off-target effects

The adeno-associated virus (AAV) is a potent vector for in vivo gene transduction and local therapeutic applications of AAVs, such as for skin ulcers, are expected. Localization of gene expression is important for the safety and efficiency of genetic therapies. We hypothesized that gene expression could be localized by designing biomaterials using poly(ethylene glycol) (PEG) as a carrier. Here we show one of the designed PEG carriers effectively localized gene expression on the ulcer surface and reduced off-target effects in the deep skin layer and the liver, as a representative organ to assess distant off-target effects, using a mouse skin ulcer model. The dissolution dynamics resulted in localization of the AAV gene transduction. The designed PEG carrier may be useful for in vivo gene therapies using AAVs, especially for localized expression.

Clinical management of dural defects: A review

Dural defects are common in spinal and cranial neurosurgery. A series of complications, such as cerebrospinal fluid leakage, occur after rupture of the dura. Therefore, treatment strategies are necessary to reduce or avoid complications. This review comprehensively summarizes the common causes, risk factors, clinical complications, and repair methods of dural defects. The latest research progress on dural repair methods and materials is summarized, including direct sutures, grafts, biomaterials, non-biomaterial materials, and composites formed by different materials. The characteristics and efficacy of these dural substitutes are reviewed, and these materials and methods are systematically evaluated. Finally, the best methods for dural repair and the challenges and future prospects of new dural repair materials are discussed.

Adhesive and self-healing materials for central nervous system repair

The central nervous system (CNS) has a limited ability to regenerate after a traumatic injury or a disease due to the low capacity of the neurons to re-grow and the inhibitory environment formed in situ. Current therapies include the use of drugs and rehabilitation, which do not fully restore the CNS functions and only delay the pathology progression. Tissue engineering offers a simple and versatile solution for this problem through the use of bioconstructs that promote nerve tissue repair by bridging cavity spaces. In this approach, the choice of biomaterial is crucial. Herein, we present recent advances in the design and development of adhesive and self-healing materials that support CNS healing. The adhesive materials have the advantage of promoting recovery without the use of needles or sewing, while the self-healing materials have the capacity to restore the tissue integrity without the need for external intervention. These materials can be used alone or in combination with cells and/or bioactive agents to control the inflammation, formation of free radicals, and proteases activity. We discuss the advantages and drawbacks of different systems. The remaining challenges that can bring these materials to clinical reality are also briefly presented.

Bioinspired multifunctional injectable hydrogel for hemostasis and infected wound management

Routine wound management faces significant challenges including rebleeding and bacterial infection that affect millions of people each year. However, conventional wound dressings (e.g., gauze, bandage) are limited to simply cover the injured surfaces and rarely show special functionality to promote the wound recovery. Currently, injectable hydrogels have been widely designed as multifunctional wound dressings to manage the hemostatic and wound healing process. Nevertheless, the integration of multiple functions through simple composition and easy construction is still difficult and hardly achieved. Herein, we reported a bioinspired multifunctional injectable hydrogel (CQCS@gel) consisted of only two components, catechol-functionalized quaternized chitosan (CQCS) and dibenzaldehyde-terminated poly(ethylene glycol) (DB-PEG₂₀₀₀). The building blocks endowed CQCS@gel with tissue-adhesive, antibacterial, antioxidant, self-healing and pH-responsive properties. Based on the in vivo hemostatic study, quick hemostasis for acute tissue injuries such as liver and carotid wounds was realized owing to the rapid gelation rate and strong tissue-adhesiveness of CQCS@gel. Moreover, CQCS@gel remarkably boosted the chronic recovery process of MRSA-infected cutaneous wounds by promoting collagen deposition, hair follicles regeneration and angiogenesis. Overall, this multifunctional injectable hydrogel shows potentials as a universal wound dressing in clinical applications, enabling both hemostasis and infected wound management. STATEMENT OF SIGNIFICANCE: This is the first report showing the multifunctional injectable hydrogel (CQCS@gel) consisted of catechol-functionalized quaternized chitosan and dibenzaldehyde-terminated poly(ethylene glycol). The incorporation of quaternary ammonium groups imparted the CQCS@gel with outstanding contact-active bacterial killing efficiency and the catechol moieties enhanced its tissue adhesive and antioxidant properties. Moreover, the reversible imine crosslinks endowed the CQCS@gel with self-healing and pH-responsive drug release capabilities. These multiple functions were integrated into a single injectable hydrogel system with easy availability and low cost. In vitro and in vivo results showed that the newly designed hydrogel was biocompatible, realized successful sealing hemostasis under multiple bleeding scenarios and enabled accelerated healing of infected skin wounds.

3D printing of bone and cartilage with polymer materials

Damage and degeneration to bone and articular cartilage are the leading causes of musculoskeletal disability. Commonly used clinical and surgical methods include autologous/allogeneic bone and cartilage transplantation, vascularized bone transplantation, autologous chondrocyte implantation, mosaicplasty, and joint replacement. 3D bio printing technology to construct implants by layer-by-layer printing of biological materials, living cells, and other biologically active substances in vitro, which is expected to replace the repair mentioned above methods. Researchers use cells and biomedical materials as discrete materials. 3D bio printing has largely solved the problem of insufficient organ donors with the ability to prepare different organs and tissue structures. This paper mainly discusses the application of polymer materials, bio printing cell selection, and its application in bone and cartilage repair.

Facile Construction of Hybrid Hydrogels with High Strength and Biocompatibility for Cranial Bone Regeneration

The significant efforts being made towards the utilization of artificial soft materials holds considerable promise for developing tissue engineering scaffolds for bone-related diseases in clinics. However, most of these biomaterials cannot simultaneously satisfy the multiple requirements of high mechanics, good compatibility, and biological osteogenesis. In this study, an osteogenic hybrid hydrogel between the amine-functionalized bioactive glass (ABG) and 4-armed poly(ethylene glycol) succinimidyl glutarate-gelatin network (SGgel) is introduced to flexibly adhere onto the defective tissue and to subsequently guide bone regeneration. Relying on the rapid ammonolysis reaction between amine groups (-NH₂) of gelatin and ABG components and N-hydroxysuccinimide (NHS)-ester of tetra-PEG-SG polymer, the hydrogel networks were formed within seconds, offering a multifunctional performance, including easy injection, favorable biocompatibility, biological and mechanical properties (compressive strength: 4.2 MPa; storage modulus: 10⁴ kPa; adhesive strength: 56 kPa), which could facilitate the stem cell viability, proliferation, migration and differentiation into osteocytes. In addition, the integration between the SGgel network and ABG moieties within a nano-scale level enabled the hybrid hydrogel to form adhesion to tissue, maintain the durable osteogenesis and accelerate bone regeneration. Therefore, a robust approach to the simultaneously satisfying tough adhesion onto the tissue defects and high efficiency for bone regeneration on a mouse skull was achieved, which may represent a promising strategy to design therapeutic scaffolds for tissue engineering in clinical applications.

CXCR4-guided liposomes regulating hypoxic and immunosuppressive microenvironment for sorafenib-resistant tumor treatment

Clinical sorafenib treatment could activate C-X-C receptor type 4 (CXCR4)/stromal source factor-1α (SDF-1α) axis to aggravate intra-tumoral hypoxia of hepatocellular carcinoma (HCC), which further leads to progression, invasion, metastasis, and immunosuppression of tumors and in return causes resistance to sorafenib therapy. Therefore, a multi-functional oxygen delivery nanoplatform was rationally constructed based on an oxygen-saturated perfluorohexane (PFH)-cored liposome, with the CXCR4 antagonist LFC131 peptides modifying on the surface to simultaneously deliver sorafenib and the CSF1/CSF1R inhibitor PLX3397 (named PFH@LSLP) for sorafenib-resistant HCC treatment. The PFH@LSLP was developed to overcome sorafenib resistance by synergistic effects of the following 3 roles: 1) the O₂-saturated PFH core could alleviate the tumor hypoxia by O₂ supply; 2) the LFC131 peptide recognized the hypoxia-related overexpressed CXCR4 and then blocked SDF-1α/CXCR4 axis to re-sensitize the HCC cells to sorafenib; 3) PLX3397 activated the immune responses via inhibiting the CSF1/CSF1R pathway in TAMs, further enhanced CD8⁺ T cell infiltration to reverse immunosuppression in tumors. Antitumor performance on H22 tumor-bearing mice and HCC patient-derived tumor xenograft (PDX) model showed that PFH@LSLP could overcome sorafenib resistance by synergistic effect of hypoxia attenuation, resistance-related gene regulation, and immune-microenvironment modification.

•

PFH@LSLP was developed to overcome sorafenib resistance.

•

LFC131 peptide blocked SDF-1α/CXCR4 to sensitize sorafenib.

•

PLX3397 blocked CSF1/CSF1R to activate immune response.

Hydrogels for the treatment of rheumatoid arthritis

Rheumatoid Arthritis is a universal disease that severely affects the normal function of human joints and the quality of life. Millions of people around the world are diagnosed with rheumatoid arthritis every year, carrying a substantial burden for both the individual and society. Hydrogel is a polymer material with good mechanical properties and biocompatibility, which shows great potential in the treatment of rheumatoid arthritis. With the progress of tissue engineering and biomedical material technology in recent years, more and more studies focus on the application of hydrogels in rheumatoid arthritis. We reviewed the progress of hydrogels applied in rheumatoid arthritis in recent years. Also, the needed comprehensive performance and current applications of therapeutic hydrogels based on the complex pathophysiological characteristics of rheumatoid arthritis are also concluded. Additionally, we proposed the challenges and difficulties in the application of hydrogels in rheumatoid arthritis and put forward some prospects for the future research.

A sustained release of alendronate from an injectable tetra-PEG hydrogel for efficient bone repair

Significant efforts on construction of smart drug delivery for developing minimally invasive gelling system to prolong local delivery of bisphosphonates are considered as promising perspectives for the bone-related diseases, which provide the hydrogels with unique bioactivities for bone repair in clinic. Herein, we have constructed an alendronate (ALN)-conjoined injectable tetra-PEG hydrogel with excellent biocompatibility, uniform network, and favorable mechanical properties in one-pot strategy. In views of the quick ammonolysis reaction between N-hydroxysuccinimide (NHS)-ester of tetra-PEG-SG and amine groups of tetra-PEG-NH₂ polymer and ALN molecules, the uniform networks were formed within seconds along with the easy injection, favorable biocompatibility and mechanical properties for hydrogel scaffolds. On account of the simultaneous physical encapsulation and chemical linkage of the ALN within the hydrogels, the ALN-conjoined tetra-PEG hydrogel exhibited a sustained drug release delivery that could persistently and effectively facilitate viability, growth, proliferation, and osteogenesis differentiation of stem cells, thereby allowing the consequent adaptation of hydrogels into the bone defects with irregular shapes, which endowed the ALN-conjoined tetra-PEG hydrogel with depot formulation capacity for governing the on-demand release of ALN drugs. Consequently, the findings imply that these drug-based tetra-PEG hydrogels mediate optimal release of therapeutic cargoes and effective promotion of in situ bone regeneration, which will be broadly utilized as therapeutic scaffolds in tissue engineering and regenerative medicine.

Alendronate-functionalized double network hydrogel scaffolds for effective osteogenesis

Development of artificial bone substitutes mimicking the extracellular matrix is a promising strategy for bone repair and regeneration. In views of the actual requirement of biomechanics, biodegradability, and bioactivity, herein, a double-network (DN) hydrogel was constructed by interspersing a methacrylated gelatin (GelMA) network into alendronate (ALN)-modified oxidized alginate (OSA) network via Schiff base reaction and photo-crosslinking process to promote in situ bone regeneration. This GelMA@OSA-ALN DN hydrogel possessed favorable network and pores, good biocompatibility, and enhanced biomechanics. Notably, the introduction of Schiff base furnished the ND hydrogel scaffold with pH-responsive biodegradation and sustained ALN drug release delivery, which could provide effective bioactivity, upregulate osteogenesis-related genes, and promote the cell viability, growth, proliferation, and osteogenesis differentiation for bone regeneration. Therefore, we provide a new insight to develop functional DN hydrogel scaffold toward governing the on-demand drug release and achieving the stem cell therapy, which will be developed into the minimally invasive gelling system to prolong local delivery of bisphosphonates for the bone-related diseases.

Construction of Biocompatible Hydrogel Scaffolds With a Long-Term Drug Release for Facilitating Cartilage Repair

In tissue engineering, hydrogel scaffolds allow various cells to be cultured and grown in vitro and then implanted to repair or replace the damaged areas. Here in this work, kartogenin (KGN), an effectively chondro-inductive non-protein bioactive drug molecule, was incorporated into a composite hydrogel comprising the positively charged chitosan (CS) and methacrylated gelatin (GelMA) polymers to fabricate appropriate microenvironments of bone marrow mesenchymal stem cells (BMSCs) for cartilage regeneration. Based on the combination of physical chain entanglements and chemical crosslinking effects, the resultant GelMA-CS@KGN composite hydrogels possessed favorable network pores and mechanical strength. In vitro cytotoxicity showed the excellent biocompatibility for facilitating the cell growth, adhesion, proliferation, and differentiation. The long-term sustainable KGN release from the hydrogel scaffolds in situ promoted the chondrogenic differentiation that can be employed as an alternative candidate for cartilage tissue regeneration.

Photo-Crosslinked Hyaluronic Acid/Carboxymethyl Cellulose Composite Hydrogel as a Dural Substitute to Prevent Post-Surgical Adhesion

A dural substitute is frequently used to repair dura mater during neurosurgical procedures. Although autologous or commercially available dural substitutes matched most of the requirements; difficulties during dural repair, including insufficient space for suturing, insufficient mechanical strength, easy tear and cerebrospinal fluid leakage, represent major challenges. To meet this need, a photo-crosslinked hydrogel was developed as a dural substitute/anti-adhesion barrier in this study, which can show sol-to-gel phase transition in situ upon short-time exposure to visible light. For this purpose, hyaluronic acid (HA) and carboxymethyl cellulose (CMC), materials used in abdominal surgery for anti-adhesion purposes, were reacted separately with glycidyl methacrylate to form hyaluronic acid methacrylate (HAMA) and carboxymethyl cellulose methacrylate (CMCMA). The HA/CMC (HC) hydrogels with different HA compositions could be prepared by photo-crosslinking HAMA and CMCMA with a 400 nm light source using lithium phenyl-2,4,6-trimethylbenzoylphosphinate as a photo-initiator. From studies of physico-chemical and biological properties of HC composite hydrogels, they are bio-compatible, bio-degradable and mechanically robust, to be suitable as a dural substitute. By drastically reducing attachment and penetration of adhesion-forming fibroblasts in vitro, the HC hydrogel can also act as an anti-adhesion barrier to prevent adhesion formation after dural repair. From in vivo study in rabbits, the HC hydrogel can repair dural defects as well as protect the dura from post-operative adhesion, endorsing the possible application of this hydrogel as a novel dural substitute.

Fabrication of Naturally Derived Double-Network Hydrogels With a Sustained Aspirin Release System for Facilitating Bone Regeneration

Continuous efforts on pursuit of effective drug delivery systems for engineering hydrogel scaffolds is considered a promising strategy for the bone-related diseases. Here, we developed a kind of acetylsalicylic acid (aspirin, ASA)-based double-network (DN) hydrogel containing the positively charged natural chitosan (CS) and methacrylated gelatin (GelMA) polymers. Combination of physical chain-entanglement, electrostatic interactions, and a chemically cross-linked methacrylated gelatin (GelMA) network led to the formation of a DN hydrogel, which had a suitable porous structure and favorable mechanical properties. After in situ encapsulation of aspirin agents, the resulting hydrogels were investigated as culturing matrices for adipose tissue-derived stromal cells (ADSCs) to evaluate their excellent biocompatibility and biological capacities on modulation of cell proliferation and differentiation. We further found that the long-term sustained ASA in the DN hydrogels could contribute to the anti-inflammation and osteoinductive properties, demonstrating a new strategy for bone tissue regeneration.

A hydrogel spinal dural patch with potential anti-inflammatory, pain relieving and antibacterial effects

CSFL caused by spinal dural defect is a common complication of spinal surgery, which need repair such as suture or sealants. However, low intracranial pressure symptoms, wound infection and prolonged hospital associated with pin-hole leakage or loose seal effect were often occurred after surgical suture or sealants repair. Stable, pressure resistance and high viscosity spinal dural repair patch in wet environment without suture or sealants was highly needed. Herein, a bioactive patch composed of alginate and polyacrylamide hydrogel matrix cross-linked by calcium ions, and chitosan adhesive was proposed. This fabricated patch exhibits the capabilities of promoting defect closure and good tight seal ability with the bursting pressure is more than 790 mm H₂O in wet environment. In addition, the chitosan adhesive layer of the patch could inhibit the growth of bacterial in vitro, which is meaningful for the postoperative infection. Furthermore, the patch also significantly reduced the expression of GFAP, IBA-1, MBP, TNF-α, and COX-2 in early postoperative period in vivo study, exerting the effects of anti-inflammatory, analgesic and adhesion prevention. Thus, the bioactive patch expected to be applied in spinal dural repair with the good properties of withstanding high pressure, promoting defect closure and inhibiting postoperative infection.

•

A self-adhesive spinal dural patch that can be applied directly by pressing.

•

A spinal dural patch maintains more than 790 mm H₂O sealing pressure in a wet environment.

•

A spinal dural patch with potential anti-inflammatory, analgesic and anti-bacterial properties.

Advances of Hydrogel-Based Bioprinting for Cartilage Tissue Engineering

Bioprinting has gained immense attention and achieved the revolutionized progress for application in the multifunctional tissue regeneration. On account of the precise structural fabrication and mimicking complexity, hydrogel-based bio-inks are widely adopted for cartilage tissue engineering. Although more and more researchers have reported a number of literatures in this field, many challenges that should be addressed for the development of three-dimensional (3D) bioprinting constructs still exist. Herein, this review is mainly focused on the introduction of various natural polymers and synthetic polymers in hydrogel-based bioprinted scaffolds, which are systematically discussed via emphasizing on the fabrication condition, mechanical property, biocompatibility, biodegradability, and biological performance for cartilage tissue repair. Further, this review describes the opportunities and challenges of this 3D bioprinting technique to construct complex bio-inks with adjustable mechanical and biological integrity, and meanwhile, the current possible solutions are also conducted for providing some suggestive ideas on developing more advanced bioprinting products from the bench to the clinic.