Co-metabolism for enhanced phenol degradation and bioelectricity generation in microbial fuel cell

Distinct electrochemical and metabolic responses of anode respiring bacteria to sulfamethoxazole in microbial fuel cells coupled with constructed wetlands

The influence of sulfamethoxazole (SMX) on the electrochemical activity, bacterial community, and metabolic state of anode respiring microbes was investigated in constructed-wetland-coupled microbial fuel cells (CW-MFCs). Results suggested that SMX shortened the acclimatisation period and enhanced the maximal power density of the CW-MFC at 0.1 mg/L. Cyclic voltammetry (CV) results indicated that SMX may trigger an electrocatalytic process related to an extra redox-active compound. Exposure to SMX significantly altered the bacterial communities, leading to decreased abundances of Desulfurivibrio and Pseudomonas, while increasing the contents of Rhodobacter and Anaerovorax. Furthermore, metabolites related to amino acids and nucleotide metabolism were suppressed at 10 mg/L SMX, while the related metabolites increased at 0.1 mg/L SMX. The upregulated pathway of biofilm formation indicated that the bacteria tended to form biofilms under the influence of SMX. This study provides valuable insights into the complex interactions between SMX and electrochemically active bacteria.

The influence of benzene on the composition, diversity and performance of the anodic bacterial community in glucose-fed microbial fuel cells

Bioelectrochemical systems offer unique opportunities to remove recalcitrant environmental pollutants in a net positive energy process, although it remains challenging because of the toxic character of such compounds. In this study, microbial fuel cell (MFC) technology was applied to investigate the benzene degradation process for more than 160 days, where glucose was used as a co-metabolite and a control. We have applied an inoculation strategy that led to the development of 10 individual microbial communities. The electrochemical dynamics of MFC efficiency was observed, along with their 1H NMR metabolic fingerprints and analysis of the microbial community. The highest power density of 120 mW/m2 was recorded in the final period of the experiment when benzene/glucose was used as fuel. This is the highest value reported in a benzene/co-substrate system. Metabolite analysis confirmed the full removal of benzene, while the dominance of fermentation products indicated the strong occurrence of non-electrogenic reactions. Based on 16S rRNA gene amplicon sequencing, bacterial community analysis revealed several petroleum-degrading microorganisms, electroactive species and biosurfactant producers. The dominant species were recognised as Citrobacter freundii and Arcobacter faecis. Strong, positive impact of the presence of benzene on the alpha diversity was recorded, underlining the high complexity of the bioelectrochemically supported degradation of petroleum compounds. This study reveals the importance of supporting the bioelectrochemical degradation process with auxiliary substrates and inoculation strategies that allow the communities to reach sufficient diversity to improve the power output and degradation efficiency in MFCs beyond the previously known limits. This study, for the first time, provides an outlook on the syntrophic activity of biosurfactant producers and petroleum degraders towards the efficient removal and conversion of recalcitrant hydrophobic compounds into electricity in MFCs.

Competitive mechanism of salt-tolerance/degradation-performance of organic pollutant in bacteria: Na+/H+ antiporters contribute to salt-stress resistance but impact phenol degradation

Phenolic-laden wastewater is typically characterized by its high toxicity and high salinity, imposing serious limits on the application of bioremediation. Although a few halotolerant microorganisms have been reported to degrade phenol, their removal efficiency on high concentrations of phenol remains unsatisfactory. What's more, the deep interaction molecular mechanism of salt-tolerance/phenol-degradation performance has not been clearly revealed. Here, a halotolerant strain Aeribacillus pallidus W-12 employed a meta-pathway to efficiently degrade high concentration of phenol even under high salinity conditions. Investigation of salt-tolerance strategy indicated that four Na+/H+ antiporters, which are widely distributed in bacteria, synergistically endowed the strain with excellent salt adaptability. All these antiporters differentially but positively responded to salinity changes and induction of phenol, forming a synergistic transport effect on salt ions and phenol. In-depth analysis revealed a competitive relationship between salt tolerance and degradation performance, which significantly impaired the degradation efficiency at relatively high salinity. The efficient degradation performance of W-12 under different phenol concentrations and salinity conditions indicated its bioremediation potential for multiple types of phenolic wastewater. Collectively, the competitive mechanism of salt tolerance and degradation performance enlightens a new strategy of introducing or re-constructing Na+/H+ antiporters to further improve bioremediation efficiency of hypersaline organic wastewater.

Integrated system of electro-catalytic oxidation and microbial fuel cells for the treatment of recalcitrant wastewater

The emission of recalcitrant wastewater poses serious threats to the environment. In this study, an integrated approach combining electrocatalytic oxidation (EC) for pretreatment and microbial fuel cells (MFC) for thorough pollutant degradation is proposed to ensure efficient degradation of target substances, with low energy input and enhanced bioavailability of refractory organics. When phenol was used as the pollutant, an initial concentration of 2000 mg/L phenol solution underwent EC treatment under constant current-exponential attenuation power supply mode, resulting in a COD removal rate of 54.53%, and a phenol degradation rate of 99.83%. Intermediate products such as hydroquinone and para-diphenol were detected in the solution. After subsequent MFC treatment, only minor amounts of para-diphenol were left, and the degradation rate of phenol and its intermediate products reached 100%, with an output power density of 110.4 mW m-2. When coal chemical wastewater was used as the pollutant, further examination of the EC-MFC system performance showed a COD removal rate of 49.23% in the EC section, and a 76.21% COD removal rate in the MFC section, with an output power density of 181.5 mW m-2. Microbiological analysis revealed typical electrogenic bacteria (such as Pseudomonas and Geobacter), and specific degrading functional bacteria (such as Stenotrophomonas, Delftia, and Brevundimonas). The dominant microbial communities and their proportions adapted to environmental changes in response to the variation of carbon sources.

Synergistic Control of Trimethoprim and the Antimicrobial Resistome in Electrogenic Microbial Communities

Synergistic control of the risks posed by emerging antimicrobials and antibiotic resistance genes (ARGs) is crucial for ensuring ecological safety. Although electrogenic respiration can enhance the biodegradation of several antimicrobials and reduce ARGs accumulation, the association mechanisms of antimicrobial biodegradation (trimethoprim, TMP) with the fate of the antimicrobial resistome remain unclear. Here, the biotransformation pathway of TMP, microbial associations, and functional gene profiles (e.g., degradation, antimicrobial resistance, and electron transfer) were analyzed. The results showed that the microbial electrogenic respiration significantly enhanced the biodegradation of TMP, especially with a cosubstrate sodium acetate supply. Electroactive bacteria enriched in the electrode biofilm positively correlated with potential TMP degraders dominated in the planktonic communities. These cross-niche microbial associations may contribute to the accelerated catabolism of TMP and extracellular electron transfer. Importantly, the evolution and dissemination of overall ARGs and mobile genetic elements (MGEs) were significantly weakened due to the enhanced cometabolic biodegradation of TMP. This study provides a promising strategy for the synergistic control of the water ecological risks of antimicrobials and their resistome, while also highlighting new insights into the association of antimicrobial biodegradation with the evolution of the resistome in an electrically integrated biological process.

Microbial electricity-driven anaerobic phenol degradation in bioelectrochemical systems

Microbial electrochemical technologies have been extensively employed for phenol removal. Yet, previous research has yielded inconsistent results, leaving uncertainties regarding the feasibility of phenol degradation under strictly anaerobic conditions using anodes as sole terminal electron acceptors. In this study, we employed high-performance liquid chromatography and gas chromatography-mass spectrometry to investigate the anaerobic phenol degradation pathway. Our findings provide robust evidence for the purely anaerobic degradation of phenol, as we identified benzoic acid, 4-hydroxybenzoic acid, glutaric acid, and other metabolites of this pathway. Notably, no typical intermediates of the aerobic phenol degradation pathway were detected. One-chamber reactors (+0.4 V vs. SHE) exhibited a phenol removal rate of 3.5 ± 0.2 mg L-1 d-1, while two-chamber reactors showed 3.6 ± 0.1 and 2.6 ± 0.9 mg L-1 d-1 at anode potentials of +0.4 and + 0.2 V, respectively. Our results also suggest that the reactor configuration certainly influenced the microbial community, presumably leading to different ratios of phenol consumers and microorganisms feeding on degradation products.

Pyrolyzed sediment accelerates electron transfer and regulates rhodamine B biodegradation

Electron transfer efficiency is a key factor that determined the removal of environmental pollution through biodegradation. Electron shuttles exogenously addition is one of the measures to improve the electron transfer efficiency. In this study, the sediment was pyrolyzed at different temperature to investigate its properties of mediating electron transfer and removing of rhodamine B (RhB) in microbial electrochemical systems (MESs). Sediments pyrolyzed at 300 °C (PS300) and 600 °C (PS600) have promoted electron transfer which led to 16 % enhancement of power generation while the result is reversed at 900 °C (PS900). Although power output of PS300 and PS600 are similar, the removal efficiency of RhB is not consistent, which may be caused by the biofilm structure difference. Microbial community analysis revealed that the abundance of EAB and toxicity-degrading bacteria (TDB) in PS600 was 6 % higher than that in PS300. The differentiation of microbial community also affected the metabolic pathway, the amino synthesis and tricarboxylic acid cycle were primarily upregulated with PS600 addition, which enhanced the intracellular metabolism. However, a more active cellular anabolism occurred with PS300, which may have been triggered by RhB toxicity. This study showed that pyrolytic sediment exhibits an excellent ability to mediate electron transport and promote pollutant removal at 600 °C, which provides a techno-economically feasible scenario for the utilization of low-carbon-containing solid wastes.

Treatment of phenolic wastewater by anaerobic fluidized bed microbial fuel cell using carbon brush as anode: microbial community analysis and m-cresol degradation mechanism

Anaerobic fluidized bed microbial fuel cell (AFB-MFC) is a technology that combines fluidized bed reactor and microbial fuel cell to treat organic wastewater and generate electricity. The performance and the mechanism of treating m-cresol wastewater in AFB-MFC using carbon brush as biofilm anode were studied. After 48 h of operation, the m-cresol removal efficiency of AFB-MFC, MAR-AFB (fluidized bed bioreactor with acclimated anaerobic sludge), MAR-FB (ordinary fluidized bed reactor with only macroporous adsorptive resin) and AST (traditional anaerobic sludge treatment) were 95.29 ± 0.67%, 85.78 ± 1.81%, 71.24 ± 1.86% and 70.41 ± 0.32% respectively. The maximum output voltage and the maximum power density of AFB-MFC using carbon brush as biofilm anode were 679.7 mV and 166.6 mW/m2 respectively. The results of high-throughput sequencing analysis indicated the relative abundance of dominant electroactive bacteria, such as Trichococcus, Geobacter, and Pseudomonas, on the anode carbon brushes was higher than that of AST, and also identified such superior m-cresol-degrading bacteria as Bdellovibrio, Thermomonas, Hydrogenophaga, etc. Based on the determination of m-cresol metabolites detected by Gas Chromatography-Mass Spectrometry (GC-MS), the possible biodegradation pathway of m-cresol under anaerobic and aerobic conditions in AFB-MFC was speculated. The results showed that m-cresol was decomposed into formic acid-acetic anhydride and 3-methylpropionic acid under the action of electrochemistry, which is a simple degradation pathway without peripheral metabolism in AFB-MFC.

Enhanced anaerobic biodegradation of typical phenolic compounds in coal gasification wastewater (CGW) using biochar: Focusing on the hydrolysis-acidification process and microbial community succession

The aim of this research is to investigate the effects of biochar (BC) on treatment performance (especially hydrolysis-acidification process) and microbial community shifts during anaerobic degradation of typical phenolic compounds in coal gasification wastewater. Compared to the control group, the removal of phenol, p-cresol and 3, 5-xylenol was gradually enhanced when increasing the BC addition within the test dosage (1-5 g/L). The biodegradation of phenol and p-cresol was significantly enhanced by BC addition while limited improvement for 3, 5-xylenol. The addition of BC significantly accelerated the hydrolysis-acidification process with the hydrolytic removal of phenol improved by 69.14%, the microbial activity was enhanced by 57.01%, and the key hydrolase bamA gene was enriched by 117.27%, respectively. Compared to 1-2 g/L dose, more protein-like and humic acid-like substances were secreted with 5 g/L BC, which probably contributed to higher extracellular electron transfer efficiency. In addition, phenol degrading bacteria (Syntrophorhabdus, Dysgonomonas, Holophaga, etc.) and electroactive microorganisms (Geobacter, Syntrophorhabdus, Methanospirillum, etc.) were enriched by BC addition. The functional genes related to carboxylation, benzoylation and ring cleavage processes of benzoyl-CoA pathway were potentially activated by BC.

Interactions among microorganisms functionally active for electron transfer and pollutant degradation in natural environments

Compared to single microbial strains, complex interactions between microbial consortia composed of various microorganisms have been shown to be effective in expanding ecological functions and accomplishing biological processes. Electroactive microorganisms (EMs) and degradable microorganisms (DMs) play vital roles in bioenergy production and the degradation of organic pollutants hazardous to human health. These microorganisms can strongly interact with other microorganisms and promote metabolic cooperation, thus facilitating electricity production and pollutant degradation. In this review, we describe several specific types of EMs and DMs based on their ability to adapt to different environments, and summarize the mechanism of EMs in extracellular electron transfer. The effects of interactions between EMs and DMs are evaluated in terms of electricity production and degradation efficiency. The principle of the enhancement in microbial consortia is also introduced, such as improved biomass, changed degradation pathways, and biocatalytic potentials, which are directly or indirectly conducive to human health.

In situ degradation of organic pollutants by novel solar cell equipped soil microbial fuel cell

The soil microbial fuel cell (SMFC) has been widely used for soil remediation for its low cost and being eco-friendly. But low degradation efficiency and high mass transfer resistance limit its performance. This study constructed a solar cell-soil microbial fuel cell (SC-SMFC) with different voltages, which use clean energy to improve system performance. At different voltages, 2.0-V system showed the best performance and the maximum output power increased by 330% compared with SMFC. Moreover, 2.0-V SC-SMFC showed the fastest phenol degradation rate of 14 μg·mL^-1·d^-1 at the concentration of 80 μg/mL, which was twice of SMFC. Further increasing the concentration to 320 μg/mL, the system showed extremely high concentration limit and degraded 90% within 19 days. Under this condition, SC-SMFC still showed excellent cycle stability, with the third-round degrading 90% phenol in 13 days. Finally, electrochemical impedance spectroscopy (EIS) mechanism study showed that solar cells can accelerate microbial metabolic process and reduce the internal resistance, in which the 2.0-V system was only 87% of SMFC. In conclusion, SC-SMFC provides a green, low-cost, and convenient method for in situ soil remediation in the future.

Co-inducible Catabolism of 2-Naphthol Initiated by Hydroxylase CehC1C2 in Rhizobium sp. X9 Removed Its Ecotoxicity

2-Naphthol, which originates from various industrial activities, is widely disseminated through the discharge of industrial wastewater and is, thus, harmful to the water ecosystem, agricultural production, and human health. In this study, the carbaryl degrading strain Rhizobium sp. X9 was proven to be able to degrade 2-naphthol and reduce its toxicity to rice (Oryza sativa) and Chlorella ellipsoidea. Two-component hydroxylase CehC1C2 is responsible for the initial step of degradation and generates 1,2-dihydroxynaphthalene, which is further degraded by the ceh cluster. The transcription of gene cluster cehC1C2 could be induced when both 2-naphthol and glucose were added. A bioinformatic analysis revealed that two transcriptional regulators, the inhibitor CehR2 and the activator CehR3, could be involved in this process. Our study elucidated the molecular mechanism of microbial degradation of 2-naphthol and provided an effective strategy for the in situ remediation of 2-naphthol contamination in the environment.

A Review of Recent Advances in Microbial Fuel Cells: Preparation, Operation, and Application

The microbial fuel cell has been considered a promising alternative to traditional fossil energy. It has great potential in energy production, waste management, and biomass valorization. However, it has several technical issues, such as low power generation efficiency and operational stability. These issues limit the scale-up and commercialization of MFC systems. This review presents the latest progress in microbial community selection and genetic engineering techniques for enhancing microbial electricity production. The summary of substrate selection covers defined substrates and some inexpensive complex substrates, such as wastewater and lignocellulosic biomass materials. In addition, it also includes electrode modification, electron transfer mediator selection, and optimization of operating conditions. The applications of MFC systems introduced in this review involve wastewater treatment, production of value-added products, and biosensors. This review focuses on the crucial process of microbial fuel cells from preparation to application and provides an outlook for their future development.

Degradation of phenol in the bio-cathode of a microbial desalination cell with power generation and salt removal

In this study, the performance of a three-chamber microbial desalination cell (MDC) was assessed to simultaneously remove salt (35 g.L^-1) from water and degrade phenol as a hazardous compound. Two parallel MDCs with the same configurations were run using glucose as the chemical oxygen demand (COD) at an initial concentration of 1.5 g.L^-1 as the anolyte. MDC#1 operated with 10 mM phosphate buffer solution (PBS), while MDC#2 operated with bio-cathode as the catholyte for the degradation of 100 mg.L^-1 of phenol. The use of MDC#1 resulted in a power density, desalination efficiency, and COD removal of 366.2 mW.m^-2, 50.3 ± 4.0 %, and 79.3 ± 2.2 %, respectively. All performance parameters were improved in MDC#2 with bio-cathode so that power density, desalination efficiency, and COD removal reached 660.1 mW.m^-2, 72.1 ± 3.0 %, and 92.6 ± 2.4 %, respectively. Also, more than 96 % of phenol was degraded using bio-cathode within 7 h of operation. Bio-cathode could enhance the performance of the MDC reactor through catalyzing the final reactions of electron acceptors compared to MDC#1 with a chemical cathode. In general, the results indicated that heterotrophic microorganisms, able to grow alongside autotrophic bacteria, could effectively extend the applications of MDC reactors to degrade hazardous compounds in cathode chambers.

A techno-economic approach for eliminating dye pollutants from industrial effluent employing microalgae through microbial fuel cells: Barriers and perspectives

Microbial fuel cells are biochemical factories which besides recycling wastewater are electricity generators, if their low power density can be scaled up. This also adds up to work on many factors responsible to increase the cost of running a microbial fuel cell. As a result, the first step is to use environment friendly dead organic algae biomass or even living algae cells in a microbial fuel cell, also referred to as microalgal microbial fuel cells. This can be a techno-economic aspect not only for treating textile wastewater but also an economical way of obtaining value added products and bioelectricity from microalgae. Besides treating wastewater, microalgae in its either form plays an essential role in treating dyes present in wastewater which essentially include azo dyes rich in synthetic ions and heavy metals. Microalgae require these metals as part of their metabolism and hence consume them throughout the integration process in a microbial fuel cell. In this review a detail plan is laid to discuss the treatment of industrial effluents (rich in toxic dyes) employing microbial fuel cells. Efforts have been made by researchers to treat dyes using microbial fuel cell alone or in combination with catalysts, nanomaterials and microalgae have also been included. This review therefore discusses impact of microbial fuel cells in treating wastewater rich in textile dyes its limitations and future aspects.

Electric Current Generation by Increasing Sucrose in Papaya Waste in Microbial Fuel Cells

The accelerated increase in energy consumption by human activity has generated an increase in the search for new energies that do not pollute the environment, due to this, microbial fuel cells are shown as a promising technology. The objective of this research was to observe the influence on the generation of bioelectricity of sucrose, with different percentages (0%, 5%, 10% and 20%), in papaya waste using microbial fuel cells (MFCs). It was possible to generate voltage and current peaks of 0.955 V and 5.079 mA for the cell with 20% sucrose, which operated at an optimal pH of 4.98 on day fifteen. In the same way, the internal resistance values of all the cells were influenced by the increase in sucrose, showing that the cell without sucrose was 0.1952 ± 0.00214 KΩ and with 20% it was 0.044306 ± 0.0014 KΩ. The maximum power density was 583.09 mW/cm² at a current density of 407.13 A/cm² and with a peak voltage of 910.94 mV, while phenolic compounds are the ones with the greatest presence in the FTIR (Fourier transform infrared spectroscopy) absorbance spectrum. We were able to molecularly identify the species Achromobacter xylosoxidans (99.32%), Acinetobacter bereziniae (99.93%) and Stenotrophomonas maltophilia (100%) present in the anode electrode of the MFCs. This research gives a novel use for sucrose to increase the energy values in a microbial fuel cell, improving the existing ones and generating a novel way of generating electricity that is friendly to the environment.

Increase in Electrical Parameters Using Sucrose in Tomato Waste

The use of organic waste as fuel for energy generation will reduce the great environmental problems currently caused by the consumption of fossil sources, giving agribusiness companies a profitable way to use their waste. In this research, tomato waste with different percentages of sucrose (0-target, 5, 10, and 20%) was used in microbial fuel cells manufactured on a laboratory scale with zinc and copper electrodes, managing to generate maximum peaks of voltage and a current of 1.08 V and 6.67 mA in the cell with 20% sucrose, in which it was observed that the optimum operating pH was 5.29, while the MFC with 0% (target) sucrose generated 0.91 V and 3.12 A on day 13 with a similar pH, even though all the cells worked in an acidic pH. Likewise, the cell with 20% sucrose had the lowest internal resistance (0.148541 ± 0.012361 KΩ) and the highest power density (224.77 mW/cm2) at a current density of 4.43 mA/cm2, while the MFC with 0% sucrose generated 160.52 mW/cm2 and 4.38 mA/cm2 of power density and current density, respectively, with an internal resistance of 0.34116 ± 0.2914 KΩ. In this sense, the FTIR (Fourier-transform infrared spectroscopy) of all the substrates used showed a high content of phenolic compounds and carboxylate acids. Finally, the MFCs were connected in a series and managed to generate a voltage of 3.43 V, enough to light an LED (green). These results give great hope to companies and society that, in the near future, this technology can be taken to a larger scale.

Electrical generation and methane emission from an anoxic riverine sediment slurry treated by a two-chamber microbial fuel cell

A two-chamber slurry microbial fuel cell (SMFC) was constructed using black-odorous river sediments as substrate for the anode. We tested addition of potassium ferricyanide (K₃[Fe(CN)₆]) or sodium chloride (NaCl) to the cathode chamber (0, 50, 100, 150, and 200 mM) and aeration of the cathode chamber (0, 2, 4, 6, and 8 h per day) to assess their response on electrical generation, internal resistance, and methane emission over a 600-h period. When the aeration time in the cathode chamber was 6 h and K₃[Fe(CN)₆] or NaCl concentrations were 200 mM, the highest power densities were 6.00, 6.45, and 6.64 mW·m^-2, respectively. With increasing K₃[Fe(CN)₆] or NaCl concentration in the cathode chamber, methane emission progressively decreased (mean ± SD: 181.6 ± 10.9 → 75.5 ± 9.8 mg/m³·h and 428.0 ± 28.5 → 157.0 ± 35.7 mg/m³·h), respectively, but was higher than the reference having no cathode/anode electrodes (~ 30 mg/m³·h). Cathode aeration (0 → 8 h/day) demonstrated a reduction in methane emission from the anode chamber for only the 6-h treatment (mean: 349.6 ± 37.4 versus 299.4 ± 34.7 mg/m³·h for 6 h/day treatment); methane emission from the reference was much lower (85.3 ± 26.1 mg/m³·h). Our results demonstrate that adding an electron acceptor (K₃[Fe(CN)₆]), electrolyte solution (NaCl), and aeration to the cathode chamber can appreciably improve electrical generation efficiency from the MFC. Notably, electrical generation stimulates methane emission, but methane emission decreases at higher power densities.

Integration of microbial electrochemical systems and photocatalysis for sustainable treatment of organic recalcitrant wastewaters: Main mechanisms, recent advances, and present prospects

In recent years, microbial electrochemical systems (MESs) have demonstrated to be an environmentally friendly technology for wastewater treatment and simultaneous production of value-added products or energy. However, practical applications of MESs for the treatment of recalcitrant wastewater are limited by their low power output and slow rates of pollutant biodegradation. As a novel technology, hybrid MESs integrating biodegradation and photocatalysis have shown great potential to accelerate the degradation of bio-recalcitrant pollutants and increase the system output. In this review, we summarize recent advances of photo-assisted MESs for enhanced removal of recalcitrant pollutants, and present further discussion about the synergistic effect of biodegradation and photocatalysis. In addition, we analyse in detail different set-up configurations, discuss mechanisms of photo-enhanced extracellular electron transfer, and briefly present ongoing research cases. Finally, we highlight the current limitations and corresponding research gaps, and propose insights for future research.

Optimal design of a multi-dimensional validated synergistic extraction process for the treatment of atmosphere-vacuum distillation wastewater

The wastewater discharged from atmosphere-vacuum distillation of oil refining process contains a high concentration of phenolic compounds, which are toxic and not eco-friendly. Direct discharge of the untreated wastewater will have an adverse impact on the surrounding environment. This paper proposes a multi-dimensional synergistic extraction solution to realize the effective disposal of atmosphere-vacuum distillation wastewater. Firstly, extraction experiments are conducted to select the optimal extractant. Secondly, the microscopic mechanism of separating phenolic compounds from wastewater with synergistic extractant of methyl isobutyl ketone and n-pentanol is investigated by molecular dynamics simulation. Finally, the synergistic extraction process is modeled and optimized based on above multi-dimensional analyses. The optimization is performed through sensitivity analysis from three aspects: operating parameters, synergistic extractant cycling, and waste heat recovery. A control scheme is then designed to maintain the smooth operation of synergistic extraction process. Feed disturbances are specifically added to test the anti-interference capability of the control scheme. With the novel treatment process proposed in this paper, the removal rate of phenolic compounds from atmosphere-vacuum distillation wastewater reaches 93.02%.

Enhancing quorum sensing in biofilm anode to improve biosensing of naphthenic acids

The feasibility of enhancing quorum sensing (QS) in anode biofilm to improve the quantifications of commercial naphthenic acid concentrations (9.4-94 mg/L) in a microbial electrochemical cell (MXC) based biosensor was demonstrated in this study. First, three calibration methods were systematically compared, and the charging-discharging operation was selected for further experiments due to its 71-227 folds higher electrical signal outputs than the continuous closed-circuit operation and cyclic voltammetry modes. Then, the addition of acylase (5 μg/L) as an exogenous QS autoinducer (acylase) was investigated, which further improved the biosensor's electrical signal output by ∼70%, as compared to the control (without acylase). The addition of acylase increased the relative expression of QS-associated genes (lasR, lasI, rhlR, rhlI, lasA, and luxR) by 7-100%, along with increased abundances of known electroactive bacterial genera, such as Geobacter (from 42% to 47%) and Desulfovibrio (from 6% to 11%). Furthermore, toxicities of different NAs concentrations measured with the Microtox bioassay test were correlated with corresponding electrical signals, indicating that MXC-biosensor can provide a dual platform for rapid assessment of both NA concentrations and NA-associated toxicity.

Study of membrane fouling mechanism during the phenol degradation in microbial fuel cell and membrane bioreactor coupling system

This study evaluated the feasibility of phenol degradation in microbial fuel cell (MFC) and membrane bioreactor (MBR) coupling system, and explored the mechanism of MBR membrane fouling. Four aspects were researched in open and closed circuit conditions: the degradation capacity of the coupling system, the increase of trans-membrane pressure (TMP), and the adhesion of phenol degradation products and microorganisms on the membrane. The results showed that the degradation of phenol and COD in the closed circuit coupling system was higher than that in the open circuit. The micro-electric field can inhibit the growth of TMP and keep dodecamethylcyclohexasiloxane away from the membrane, meanwhile can also reduce the abundance and species diversity of microorganisms. Nevertheless, the micro-electric field could not completely eliminate the membrane fouling due to the fact that the phenol degradation product of ethanethiol, microorganisms of Proteobacteria and Actinobacteria were more favorable on the membrane.

Simultaneous enhancement of power generation and chlorophenol degradation in nonmodified microbial fuel cells using an electroactive biofilm carbon felt anode

Microbial fuel cells (MFCs) are an emerging technique presenting remarkable potential. In the current MFC, an electroactive biofilm anode was inoculated with activated sludge from a local municipal sewage treatment plant. The output voltage peaked at 0.60 V and 0.56 V in MFCs cultured with 2-chlorophenol (MFC-2-CP) and 2,4-dichlorophenol (MFC-2,4-DCP), respectively. The degradation and mineralization efficiency in MFC-2-CP were 100.0% and 82.0%, respectively. Based on the bacterial 16S rRNA gene sequence analysis, abundant Acinetobacter and Azospirillum existed during both the bioelectricity and biodegradation stages in MFC-2-CP, but different patterns were exhibited in MFC-2,4-DCP. The electrogenic bacteria relied on the electron transfer pathway of nicotinamide adenine dinucleotide dehydrogenase, succinate dehydrogenase and terminal oxidase, while the electrons were transferred to the extracellular electrode by cytochrome C, riboflavin, degradation products of CPs and flagella. 2-CP and 2,4-DCP were biodegraded into less toxic cyclohexanol via dichlorination, hydroxylation, and hydrogenation; hereafter, the ring was opened to generate long-chain hydrocarbons, and finally mineralized into CO₂ and H₂O. This work provided a new strategy for MFCs in power generation and contaminant treatment.

Coinducible Catabolism of 1-Naphthol via Synergistic Regulation of the Initial Hydroxylase Genes in Sphingobium sp. Strain B2

1-Naphthol, a widely used raw material for organic synthesis, is also a well-known organic pollutant. Due to its high toxicity, 1-naphthol is rarely used by microorganisms as the sole carbon source for growth. In this study, catabolism of 1-naphthol by Sphingobium sp. strain B2 was found to be greatly enhanced by additional supplementation with primary carbon sources (e.g., glucose, maltose, and sucrose), and 1-naphthol was even used as the carbon source for growth when strain B2 cells had been preinduced by both 1-naphthol and glucose. A distinct two-component flavin-dependent monooxygenase, NdcA1A2, was found to be responsible for the initial hydroxylation of 1-naphthol to 1,2-dihydroxynaphthalene, a more toxic compound. Transcriptional levels of ndcA1A2 genes were significantly upregulated when strain B2 cells were cultured with both 1-naphthol and glucose compared to cells cultured with only 1-naphthol or glucose. Two transcriptional regulators, the activator NdcS and the inhibitor NdcR, were found to play key roles in the synergistic regulation of the transcription of the 1-naphthol initial catabolism genes ndcA1A2 IMPORTANCE Cometabolism is a widely observed phenomenon, especially in the field of microbial catabolism of highly toxic xenobiotics. However, the mechanisms of cometabolism are ambiguous, and the roles of the obligately coexisting growth substrates remain largely unknown. In this study, we revealed that the roles of the coexisting primary carbon sources (e.g., glucose) in the enhanced catabolism of the toxic compound 1-naphthol in Sphingobium sp. strain B2 were not solely because they were used as growth substrates to support cell growth but, more importantly, because they acted as coinducers to interact with two transcriptional regulators, the activator NdcS and the inhibitor NdcR, to synergistically regulate the transcription of the 1-naphthol initial catabolism genes ndcA1A2 Our findings provide new insights into the cometabolic mechanism of highly toxic compounds in microorganisms.

The performance of aerobic granular sludge for simulated swine wastewater treatment and the removal mechanism of tetracycline

In this study, aerobic granular sludge (AGS) cultivated in a sequencing batch reactor (SBR) was employed to investigate its ability on the decontamination of tetracycline (TC) from swine wastewater (SWW). The removal mechanism of TC by AGS was studied. Results showed that the AGS process could effectively remove chemical oxygen demand (COD), ammonium nitrogen (NH_{+ 4}-N), total phosphorus (TP), and TC during operation. The removal of TC by AGS was mainly due to adsorption and biodegradation, and the contribution rate of biodegradation increased after AGS adaptation to TC. Twenty-two by-products were detected during biodegradation of TC, and accordingly the degradation pathway of TC was speculated. Compared to the control reactor, the microbe diversity in different levels of classification was richer in the TC fed reactor according to the LefSe analysis. The results revealed that enzymes that participated in the metabolic pathway of microbial biodegradation of polycyclic aromatic compounds were enriched and may have played a key role in the biodegradation of TC.

Enhanced bioelectrochemical treatment of petroleum refinery wastewater with Labaneh whey as co-substrate

Petroleum refinery wastewater (PRW) that contains recalcitrant components as the major portion of constituents is difficult to treat by conventional biological processes. Microbial fuel cells (MFCs) which also produce renewable energy were found to be promising for the treatment of PRW. However, due to the high total dissolved solids and low organic matter content, the efficiency of the process is limited. Labaneh whey (LW) wastewater, having higher biodegradability and high organic matter was evaluated as co-substrate along with PRW in standard dual chambered MFC to achieve improved power generation and treatment efficiency. Among several concentrations of LW as co-substrate in the range of 5–30% (v/v) with PRW, 85:15 (PRW:LW) showed to have the highest power generation (power density (PD), 832 mW/m²), which is two times higher than the control with PRW as sole substrate (PD, 420 mW/m²). On the contrary, a maximum substrate degradation rate of 0.420 kg COD/m³-day (ξCOD, 63.10%), was registered with 80:20 feed. Higher LW ratios in PRW lead to the production of VFA which in turn gradually decreased the anolyte pH to below 4.5 (70:30 feed). This resulted in a drop in the performance of MFC with respect to power generation (274 mW/m², 70:30 feed) and substrate degradation (ξCOD, 17.84%).

The Utility of Electrochemical Systems in Microbial Degradation of Polycyclic Aromatic Hydrocarbons: Discourse, Diversity and Design

Polycyclic aromatic hydrocarbons (PAHs), especially high molecular weight PAHs, are carcinogenic and mutagenic organic compounds that are difficult to degrade. Microbial remediation is a popular method for the PAH removal in diverse environments and yet it is limited by the lack of electron acceptors. An emerging solution is to use the microbial electrochemical system, in which the solid anode is used as an inexhaustible electron acceptor and the microbial activity is stimulated by biocurrent in situ to ensure the PAH removal and avoid the defects of bioremediation. Based on the extensive investigation of recent literatures, this paper summarizes and comments on the research progress of PAH removal by the microbial electrochemical system of diversified design, enhanced measures and functional microorganisms. First, the bioelectrochemical degradation of PAHs is reviewed in separate and mixed PAH degradation, and the removal performance of PAHs in different system configurations is compared with the anode modification, the enhancement of substrate and electron transfer, the addition of chemical reagents, and the combination with phytoremediation. Second, the key functional microbiota including PAH degrading microbes and exoelectrogens are overviewed as well as the reduced microbes without competitive advantage. Finally, the typical representations of electrochemical activity especially the internal resistance, power density and current density of systems and influence factors are reviewed with the correlation analysis between PAH removal and energy generation. Presently, most studies focused on the anode modification in the bioelectrochemical degradation of PAHs and actually more attentions need to be paid to enhance the mass transfer and thus larger remediation radius, and other smart designs are also proposed, especially that the combined use of phytoremediation could be an eco-friendly and sustainable approach. Additionally, exoelectrogens and PAH degraders are partially overlapping, but the exact functional mechanisms of interaction network are still elusive, which could be revealed with the aid of advanced bioinformatics technology. In order to optimize the efficacy of functional community, more advanced techniques such as omics technology, photoelectrocatalysis and nanotechnology should be considered in the future research to improve the energy generation and PAH biodegradation rate simultaneously.

Simultaneous wastewater treatment and energy harvesting in microbial fuel cells: an update on the biocatalysts

The development of microbial fuel cell (MFC) makes it possible to generate clean electricity as well as remove pollutants from wastewater. Extensive studies on MFC have focused on structural design and performance optimization, and tremendous advances have been made in these fields. However, there is still a lack of systematic analysis on biocatalysts used in MFCs, especially when it comes to pollutant removal and simultaneous energy recovery. In this review, we aim to provide an update on MFC-based wastewater treatment and energy harvesting research, and analyze various biocatalysts used in MFCs and their underlying mechanisms in pollutant removal as well as energy recovery from wastewater. Lastly, we highlight key future research areas that will further our understanding in improving MFC performance for simultaneous wastewater treatment and sustainable energy harvesting.