Stimulation of glutathione depletion, ROS production and cell cycle arrest of dental pulp cells and gingival epithelial cells by HEMA

Accelerated In Vitro Oxidative Degradation Testing of Ultra-High Molecular Weight Polyethylene (UHMWPE)

Nonabsorbable polymers used in biomedical applications are assumed to be permanently stable based on short-term testing, but some may be susceptible to oxidative degradation over several years of implantation. Traditional in vitro oxidative degradation screenings employ hydrogen peroxide (H2O2) solutions. However, the inherent instability of H2O2 can compromise the consistency of oxidative conditions, especially over extended periods and at elevated temperatures used for accelerated testing. In this study, an automated reactive accelerated aging (aRAA) system, which integrates an electrochemical detection method and a feedback loop, was utilized to ensure precise control of H2O2 concentrations during polymer oxidative degradation testing. The reproducibility of the aRAA system was evaluated by comparing four identical setups. Its efficacy as an oxidation challenge was demonstrated on (i) medical-grade vitamin E (VE) blended ultra-high molecular weight polyethylene (UHMWPE) and (ii) highly crosslinked (HXL) UHMWPE as model materials. The aRAA-aged VE-UHMWPE and HXL-UHMWPE samples were also compared against samples aged via an existing accelerated aging standard, ASTM F2003-02(2022). Samples were analyzed using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy to calculate their oxidation index per ASTM F2102-17. We observed that the aRAA system was more effective in oxidizing VE-UHMWPE and HXL-UHMWPE than the traditional ASTM F2003-02(2022) method. By providing a standardized and reliable approach to assess polymer oxidative degradation, the aRAA system could enhance the accuracy of long-term stability predictions for nonresorbable polymers in medical devices.

Guidance on the assessment of biocompatibility of biomaterials: Fundamentals and testing considerations

BACKGROUND

Assessing the biocompatibility of materials is crucial for ensuring the safety and well-being of patients by preventing undesirable, toxic, immune, or allergic reactions, and ensuring that materials remain functional over time without triggering adverse reactions. To ensure a comprehensive assessment, planning tests that carefully consider the intended application and potential exposure scenarios for selecting relevant assays, cell types, and testing parameters is essential. Moreover, characterizing the composition and properties of biomaterials allows for a more accurate understanding of test outcomes and the identification of factors contributing to cytotoxicity. Precise reporting of methodology and results facilitates research reproducibility and understanding of the findings by the scientific community, regulatory agencies, healthcare providers, and the general public.

AIMS

This article aims to provide an overview of the key concepts associated with evaluating the biocompatibility of biomaterials while also offering practical guidance on cellular principles, testing methodologies, and biological assays that can support in the planning, execution, and reporting of biocompatibility testing.

Managing Oxidative Stress Using Vitamin C to Improve Biocompatibility of Polycaprolactone for Bone Regeneration In Vitro

Increased oxidative stress in bone cells is known to negatively alter favorable bone regeneration. This study aimed to develop a porous polycaprolactone (PCL) membrane incorporated with 25 wt % Vitamin C (PCL-Vit C) and compared it to the PCL membrane to control oxidative stress and enhance biomineralization in vitro. Both membranes were characterized using SEM-EDS, FTIR spectroscopy, and surface hydrophilicity. Vitamin C release was quantified colorimetrically. Assessments of the viability and attachment of human fetal osteoblast (hFOB 1.19) cells were carried out using XTT assay, SEM, and confocal microscopy, respectively. ROS generation and wound healing percentage were measured using flow cytometry and ImageJ software, respectively. Mineralization study using Alizarin Red in the presence or absence of osteogenic media was carried out to measure the calcium content. Alkaline phosphatase assay and gene expression of osteogenic markers (alkaline phosphatase (ALP), collagen Type I (Col1), runt-related transcription factor 2 (RUNX2), osteocalcin (OCN), and osteopontin (OPN)) were analyzed by real-time PCR. SEM images revealed smooth, fine, bead-free fibers in both membranes. The FTIR spectrum of pure vitamin C was replaced with peaks at 3436.05 and 2322.83 cm-1 in the PCL-Vit C membrane. Vitamin C release was detected at 15 min and 1 h. The PCL-Vit C membrane was hydrophilic, generated lower ROS, and showed significantly higher viability than the PCL membrane. Although both PCL and PCL-Vit C membranes showed similar cellular and cytoskeletal morphology, more cell clusters were evident in the PCL-Vit C membrane. Lower ROS level in the PCL-Vit C membrane displayed improved cell functionality as evidenced by enhanced cellular differentiation with more intense alizarin staining and higher calcium content, supported by upregulation of osteogenic markers ALP, Col1, and OPN even in the absence of osteogenic supplements. The presence of Vitamin C in the PCL-Vit C membrane may have mitigated oxidative stress in hFOB 1.19 cells, resulting in enhanced biomineralization facilitating bone regeneration.

Analysis of Gingival Fibroblasts Behaviour in the Presence of 3D-Printed versus Milled Methacrylate-Based Dental Resins-Do We Have a Winner?

Computer-aided design and computer-aided manufacturing (CAD/CAM) techniques are based on either subtractive (milling prefabricated blocks) or additive (3D printing) methods, and both are used for obtaining dentistry materials. Our in vitro study aimed to investigate the behavior of human gingival fibroblasts exposed to methacrylate (MA)-based CAD/CAM milled samples in comparison with that of MA-based 3D-printed samples to better elucidate the mechanisms of cell adaptability and survival. The proliferation of human gingival fibroblasts was measured after 2 and 24 h of incubation in the presence of these samples using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, and the membrane integrity was assessed through the lactate dehydrogenase release. The level of reactive oxygen species, expression of autophagy-related protein LC3B-I, and detection of GSH and caspase 3/7 were evaluated by fluorescence staining. The MMP-2 levels were measured using a Milliplex MAP kit. The incubation with MA-based 3D-printed samples significantly reduced the viability, by 16% and 28% from control after 2 and 24 h, respectively. There was a 25% and 55% decrease in the GSH level from control after 24 h of incubation with the CAD/CAM milled and 3D-printed samples, respectively. In addition, higher levels of LC3B-I and MMP-2 were obtained after 24 h of incubation with the MA-based 3D samples compared to the CAD/CAM milled ones. Therefore, our results outline that the MA-CAD/CAM milled samples displayed good biocompatibility during 24-h exposure, while MA-3D resins are proper for short-term utilization (less than 24 h).

Marketable 1,3-dimethylamylamine and caffeine-based thermogenic supplements: Regulatory genotoxicity assessment through in vitro and in silico approaches

The consumption of dietary supplements to enhance physical performance has increased significantly in the last century, especially thermogenic pre-workout supplements. Nevertheless, this industry has faced criticism for inadequate safety measures surveillance in regulatory issues regarding their products. The aims of our study were to investigate two pre-workout supplements with respect to (1) mutagenicity utilizing Salmonella/microsome assay; (2) genotoxicity employing cytokinesis-block micronucleus (CBMN) assay protocols; and (3) hepatocytoxicity using WST cell proliferation, activities of lactate dehydrogenase (LDH) and alkaline phosphatase using human liver carcinoma (HepG2) and mouse fibroblast (F C3H) cells. Oxidative stress was determined through glutathione (GSH) measurement and in silico for predictions of pharmacokinetics and toxicity for the most abundant isolated substances present in these supplements. Both supplements induced mutagenicity in all examined bacterial strains, especially in the presence of exogenous metabolism. Further, tested supplements significantly elevated the formation of micronuclei (MN) as well as other cellular phenomena. Concentration- and time-dependent curves were observed for hepatotoxicity in both studied cell lines. In addition, both supplements decreased levels of intracellular and extracellular GSH. In silico predictions showed that the isolated individual compounds failed to induce the observed outcomes. Our findings provide contributions to the molecular mechanisms underlying two pre-workout supplement-induced toxicity and the need for surveillance.

Accelerated in vitro oxidative degradation testing of polypropylene surgical mesh

Polypropylene (PP) surgical mesh had reasonable success in repair of hernia and treatment of stress urinary incontinence (SUI); however, their use for the repair of pelvic organ prolapse (POP) resulted in highly variable results with lifelong complications in some patients. One of several factors that could be associated with mesh-related POP complications is changes in the properties of the implanted surgical mesh due to oxidative degradation of PP in vivo. Currently, there are no standardized in vitro bench testing methods available for assessing the susceptibility to oxidative degradation and estimating long-term in vivo stability of surgical mesh. In this work, we adapted a previously reported automated reactive accelerated aging (aRAA) system, which uses elevated temperatures and high concentrations of hydrogen peroxide (H2 O2 ), for accelerated bench-top oxidative degradation testing of PP surgical mesh. Since H2 O2 is highly unstable at elevated temperatures and for prolonged periods, the aRAA system involves a feedback loop based on electrochemical detection methods to maintain consistent H2 O2 concentration in test solutions. Four PP mesh samples with varying mesh knit designs, filament diameter, weight, and % porosity, were selected for testing using aRAA up to 4 weeks and characterized using thermal analysis, Fourier-transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) and scanning electron microscopy (SEM). Additionally, the oxidation index (OI) values were calculated based on the FTIR-ATR spectra to estimate the oxidative degradation and oxidation reaction kinetics of PP surgical mesh. The OI values and surface damage in the form of surface flaking, peeling, and formation of transverse cracks increased with aRAA aging time. The aRAA test method introduced here could be used to standardize the assessment of long-term stability of surgical mesh and may also be adopted for accelerated oxidative degradation testing of other polymer-based medical devices.

Cell cycle and enzymatic activity alterations induced by ROS production in human neuroblastoma cells SH-SY5Y exposed to Fumonisin B1, Ochratoxin A and their combination

The presence of mycotoxins such as Fumonisin B1(FB1) and Ochratoxin A (OTA) in food and feed has become a threat to human and animal health since they can produce several afflictions. Different mechanisms of action by which they exercise their cytotoxic activity have been attributed to them, including the production of reactive oxygen species (ROS). For this reason, a measurement of the production of ROS species, and an evaluation of the intrinsic cell enzymatic antioxidant activity, including glutathione peroxidase (GPx), glutathione transferase (GTS), and catalase (CAT) together with a cytotoxicity and cell cycle assay have been performed in undifferentiated SH-SY5Y cells exposed to FB1, OTA and [FB1 + OTA] after 24 h and 48 h. FB1 and OTA. Monitoring of intracellular ROS production was carried out by the H2-DCFDA probe; while spectrometry analysis of absorbances was used for measuring GPx, GST and CAT activity. Finally, cell proliferation and cell cycle distribution were studied by flow cytometry. When cells were treated with OTA, an increase in GPx and GST activity was observed compared to FB1 and [FB1 + OTA]; conversely, a decrease in CAT activity was observed when cells were exposed to OTA coinciding with the results observed for ROS measurement. Regarding the cell cycle, when cells were exposed to OTA, a decrease in G0/G1 was detected, revealing an arrest of cell division for SH-SY5Y cells at the concentrations studied.

Oxidative-Stress-Mediated ER Stress Is Involved in Regulating Manoalide-Induced Antiproliferation in Oral Cancer Cells

Manoalide provides preferential antiproliferation of oral cancer but is non-cytotoxic to normal cells by modulating reactive oxygen species (ROS) and apoptosis. Although ROS interplays with endoplasmic reticulum (ER) stress and apoptosis, the influence of ER stress on manoalide-triggered apoptosis has not been reported. The role of ER stress in manoalide-induced preferential antiproliferation and apoptosis was assessed in this study. Manoalide induces a higher ER expansion and aggresome accumulation of oral cancer than normal cells. Generally, manoalide differentially influences higher mRNA and protein expressions of ER-stress-associated genes (PERK, IRE1α, ATF6, and BIP) in oral cancer cells than in normal cells. Subsequently, the contribution of ER stress on manoalide-treated oral cancer cells was further examined. ER stress inducer, thapsigargin, enhances the manoalide-induced antiproliferation, caspase 3/7 activation, and autophagy of oral cancer cells rather than normal cells. Moreover, N-acetylcysteine, an ROS inhibitor, reverses the responses of ER stress, aggresome formation, and the antiproliferation of oral cancer cells. Consequently, the preferential ER stress of manoalide-treated oral cancer cells is crucial for its antiproliferative effect.

Effect of Different Application Modalities on the Bonding Performance of Adhesive Systems to Dentin: A Systematic Review and Meta-Analysis

Diverse types of dental adhesives exhibit different cytotoxic outcomes on cells in vitro. Currently, no standard adhesive application technique has so far been decisive for clinicians for better durability of resin-dentin bonds of adhesive systems. The purpose of this study was to systematically review the literature to evaluate the bonding performance of adhesive systems to dentin by using different application modalities. The systematic research strategy was conducted by two reviewers among multiple databases: PubMed, Scopus, Web of Science, Embase, and Scielo. In vitro studies reporting the effects of additional steps for the application of adhesive systems on the bond strength to dentin were selected. Meta-analysis was performed using Review Manager Software version 5.3.5 using the random effects model. The methodological quality of each in vitro study was assessed according to the parameters of a previous systematic review. The electronic research through different databases generated a total of 8318 references. After the examination of titles and abstracts, a total of 106 potentially relevant studies accessed the full-text evaluation phase. After full-text examination, 78 publications were included for the qualitative analysis, and 68 studies were included in the meta-analysis. Regarding the etch-and-rinse adhesive systems, the application modalities that improved the overall bond strength were the application of a hydrophobic resin layer (p = 0.005), an extended application time (p < 0.001), an application assisted by an electric current (p < 0.001), a double-layer application (p = 0.05), the agitation technique (p = 0.02), and the active application of the adhesive (p < 0.001). For self-etch adhesive systems, the techniques that improved the overall bond strength were the application of a hydrophobic resin layer (p < 0.001), an extended application time (p = 0.001), an application assisted by an electric current (p < 0.001), a double-layer application (p < 0.001), the agitation technique (p = 0.01), and the active application of the adhesive (p < 0.001). The in vitro evidence suggests that the application of adhesive systems using alternative techniques or additional strategies may be beneficial for improving their bond strength to dentin. The application modalities that favored the overall bond strength to dentin were an extended application time, a double-layer application, an application assisted by an electric current, the active application of the adhesive, and the application of a hydrophobic resin layer. Worth mentioning is that some techniques are intended to increase the degree of the conversion of the materials, and therefore, improvements in the biocompatibility of the materials can be expected.

The Role of Copper Homeostasis in Brain Disease

In the human body, copper is an important trace element and is a cofactor for several important enzymes involved in energy production, iron metabolism, neuropeptide activation, connective tissue synthesis, and neurotransmitter synthesis. Copper is also necessary for cellular processes, such as the regulation of intracellular signal transduction, catecholamine balance, myelination of neurons, and efficient synaptic transmission in the central nervous system. Copper is naturally present in some foods and is available as a dietary supplement. Only small amounts of copper are typically stored in the body and a large amount of copper is excreted through bile and urine. Given the critical role of copper in a breadth of cellular processes, local concentrations of copper and the cellular distribution of copper transporter proteins in the brain are important to maintain the steady state of the internal environment. The dysfunction of copper metabolism or regulatory pathways results in an imbalance in copper homeostasis in the brain, which can lead to a myriad of acute and chronic pathological effects on neurological function. It suggests a unique mechanism linking copper homeostasis and neuronal activation within the central nervous system. This article explores the relationship between impaired copper homeostasis and neuropathophysiological progress in brain diseases.

Physapruin A Enhances DNA Damage and Inhibits DNA Repair to Suppress Oral Cancer Cell Proliferation

The selective antiproliferation to oral cancer cells of Physalis peruviana-derived physapruin A (PHA) is rarely reported. Either drug-induced apoptosis and DNA damage or DNA repair suppression may effectively inhibit cancer cell proliferation. This study examined the selective antiproliferation ability of PHA and explored detailed mechanisms of apoptosis, DNA damage, and repair. During an ATP assay, PHA provided high cytotoxicity to two oral cancer cell lines (CAL 27 and Ca9-22) but no cytotoxicity to two non-malignant oral cells (HGF-1 and SG). This selective antiproliferation of PHA was associated with the selective generation of reactive oxygen species (ROS) in oral cancer cells rather than in non-malignant oral cells, as detected by flow cytometry. Moreover, PHA induced other oxidative stresses in oral cancer cells, such as mitochondrial superoxide generation and mitochondrial membrane potential depletion. PHA also demonstrated selective apoptosis in oral cancer cells rather than non-malignant cells in annexin V/7-aminoactinmycin D and caspase 3/7 activity assays. In flow cytometry and immunofluorescence assays, PHA induced γH2AX expressions and increased the γH2AX foci number of DNA damages in oral cancer cells. In contrast, the mRNA expressions for DNA repair signaling, including homologous recombination (HR) and non-homologous end joining (NHEJ)-associated genes, were inhibited by PHA in oral cancer cells. Moreover, the PHA-induced changes were alleviated by the oxidative stress inhibitor N-acetylcysteine. Therefore, PHA generates selective antiproliferation, oxidative stress, and apoptosis associated with DNA damage induction and DNA repair suppression in oral cancer cells.

Toxicogenetic assessment of a pre-workout supplement: In vitro mutagenicity, cytotoxicity, genotoxicity and glutathione determination in liver cell lines and in silico ADMET approaches

The benefits of practicing physical activity, such as weight loss and control, are commonly associated with caloric restriction diets and may be improved by the ingestion of thermogenic and ergogenic supplements. However, there is a lack of safety data on commonly marketed nutritional supplements. Therefore, this investigation aims to evaluate a pre-workout supplement for mutagenicity using the Ames test, hepatocytoxicity in HepG2 and F C3H cells after 24 h, 48 h and 72 h, genotoxicity using the CBMN assay, determination of gluthatione activity and computational prediction of the three major isolated compounds present in the supplement. The mutagenicity test showed a mutagenic response in TA98 His⁺ revertants of 5 mg/plate in the presence of metabolic activation, cytotoxicity in TA98 of 5 mg/plate in the absence of metabolic conditions, and in TA102 of 0.5 mg/plate both in the presence and absence of metabolic activation. In our in vitro eukaryotic cell viability, WST-1, LDH and alkaline phosphatase assays, the supplement showed hepatocytotoxicity both dose-dependently and time-dependently. In the cytokinesis blocking micronuclei assay, the supplement induced micronuclei, nuclear buds, nucleoplasmatic, bridge formation, and a decreased in nuclear division. In addition, the supplement decreased intra and extracellular GSH. Computational analysis showed that the three isolated compounds most present in the supplement have the potential to cause hepatotoxicity. In the present investigation, the pre-workout supplement induced mutagenic, genotoxic, and cytotoxic responses and GSH decrease. Thus, considering food safety and public health sanitary vigilance, the consumption of this pre-workout supplement may harm the health of its consumers.

Effects of resin materials dedicated for additive manufacturing of temporary dental restorations on human gingival keratinocytes

OBJECTIVE

This study investigated the effect of eluates of conventional and 3D-printed resin materials for manufacturing temporary dental restorations on gingival keratinocytes.

METHODS

Three-dimensional (3D)-printed resin materials: 3Delta temp (Deltamed), NextDent MFH (Nextdent), Freeprint temp (Detax), GC temp (GC), were compared to Grandio disc (Voco) and Luxatemp (DMG). Human gingival keratinocytes (IHGKs) were exposed to eluates of the materials and XTT assays were performed at 24 h, 48 h, 72 h, or 144 h. For quantification of the proinflammatory response, the protein amount of IL-6 and 8 was determined in the supernatants using ELISA. One-way ANOVA with post hoc analysis was used to compare differences in cell viability and IL-6 and IL-8 levels between groups.

RESULTS

At 24 h, and more remarkably at 48 h, a significant decrease in cell viability occurred for the 3D-printed materials compared to the untreated IHGKs, but also compared to Grandio disc and Luxatemp. Except for the expression of IL-8 in presence of the eluate of Grandio disc at 24 and 48 h, all tested materials caused attenuation of IL-6 and 8 from IHGKs for any observation period.

CONCLUSIONS

The materials for additive manufacturing affect cell proliferation differently than the subtractive manufactured material Grandio disc and the conventional material Luxatemp.

CLINICAL SIGNIFICANCE

In comparison to conventional and subtractive manufactured restorations, 3D printed temporary restorations might induce more negative effects on the gingival and probably also on pulpal health since viability and the proinflammatory response of oral keratinocytes are more intensively affected by these materials.

Assessment of genotoxicity of glass ionomer cements: a systematic review

To evaluate, through a systematic review, the assessment of genotoxicity of glass ionomer cements in vitro and in vivo. A systematic review was performed with the problem, intervention, control, and outcomes (PICOS) strategy, aiming to answer the following question: "Can glass ionomer cements induce genetic damage in vitro and in vivo?" A systematic search was performed in the following electronic databases: PubMed (including MedLine), Web of Science, and Scopus. The quality of included studies was assessed using the Effective Public Health Practice Project (EPHPP). After the authors performed the review of all articles, a total of 13 manuscripts met all the inclusion criteria in the systematic review. Following the parameters of the EPHPP, eight articles were classified as strong or moderate quality. The other ones (five studies) were weak. Taken together our results demonstrated that, six studies reported genotoxicity of the modified glass ionomer cements tested and two studies concluded that the effect of genotoxicity was time dependent.

How Water Content Can Influence the Chemomechanical Properties and Physical Degradation under Aging of Experimental Adhesives

Objective

To evaluate the physicochemical (sorption (SOR), solubility (SOL), and degree of conversion (DC)) and mechanical (flexural strength (FS), modulus of elasticity (ME), and compressive strength (CS)) properties of adhesives with different water contents (D₂O).

Materials and Methods

An adhesive was formulated: 55 wt% BisGMA, 45 wt% HEMA, 0.5 wt% camphorquinone, 0.5 wt% EDMAB, and 1.0 wt% DPIHP. D₂O was added into the adhesives (0 wt%, 10 wt%, and 16 wt%). DC was monitored through the FTIR. FS, ME, CS, SOR, and SOL were tested. The adhesive samples were aged in deionized water, ethanol, and acetone. Data were submitted to ANOVA and Tukey's tests (5%).

Results

For DC, the 0 wt% group showed a significant reduction (68.09 ± 0.14_A) compared with the 10 wt% (87.07 ± 0.81_B) and 16 wt% groups (89.87 ± 0.24_B); 10 wt% showed the highest FS (MPa) mean values (141.6 ± 6.71_B) compared with the 0 wt% (109.4 ± 20.5_A) and 16 wt% (107.8 ± 15.8_A). For the CS (MPa) and ME (GPa), the 16 wt% showed the lowest mean values (98.8 ± 18.0_B and 2.2 ± 0.3_B, respectively) compared with the 10 wt% and 0 wt%. For the SOR, 16 wt% of water showed the highest mean values and the ethanol showed the lowest mean values of SOL regardless of water content.

Conclusion

The amount of water content and the types of aging solvents significantly affect the adhesive properties.

In Vitro and In Vivo Efficacy of New Composite for Direct Pulp Capping

Objectives

To investigate physicochemical properties, dentin bonding, cytotoxicity, and in vivo pulp response of experimental self-adhesive composites tailored to direct pulp capping.

Materials and Methods

Experimental composites were prepared with beta-tricalcium phosphate and hydroxyapatite nanoparticles adsorbed with simvastatin and glutathione added at 0% (control resin), 1 wt% (Res 1%), and 10 wt% (Res 10%). A commercial light-curable calcium hydroxide (Ca(OH)₂) (Ultra-Blend Plus) was used as control material. The physicochemical properties investigated were flexural strength and modulus, calcium release, and degree of conversion. Dentin bonding was assessed by the push-out test. Proliferation and cell counting assays were performed to evaluate in vitro cytotoxicity using fluorescence microscopy. In vivo pulp capping was performed on molars of Wistar rats, which were euthanized after 14 days and evaluated by histological analysis.

Results

No statistical difference was observed in flexural strength and cell viability (p > 0.05). Res 10% presented higher modulus than control resin and Ca(OH)₂. Also, Res 10% attained statistically higher degree of conversion when compared to other experimental composites. Ca(OH)₂ showed higher calcium release after 28 and 45 days of storage, with no statistical difference at 45 days to Res 10%. All experimental composites achieved significantly higher bond strength when compared to Ca(OH)₂. While no significant difference was observed in the cell proliferation rates, resins at lower concentrations showed higher cell viability. In vivo evaluation of pulp response demonstrated no pulp damage with experimental composites.

Conclusions

The experimental composite investigated in this study achieved adequate physicochemical properties with minor in vivo pulpal inflammation and proved to be a valuable alternative for direct pulp capping.

Effect of butyrate, a bacterial by-product, on the viability and ICAM-1 expression/production of human vascular endothelial cells: Role in infectious pulpal/periapical diseases

AIM

To investigate the effects of butyric acid (BA), a metabolic product generated by pulp and root canal pathogens, on the viability and intercellular adhesion molecule-1 (ICAM-1) production of endothelial cells, which are crucial to angiogenesis and pulpal/periapical wound healing.

METHODOLOGY

Endothelial cells were exposed to butyrate with/without inhibitors. Cell viability, apoptosis and reactive oxygen species (ROS) were evaluated using an MTT assay, PI/annexin V and DCF fluorescence flow cytometry respectively. RNA and protein expression was determined using a polymerase chain reaction assay and Western blotting or immunofluorescent staining. Soluble ICAM-1 (sICAM-1) was measured using an enzyme-linked immunosorbent assay. The quantitative results were expressed as mean ± standard error (SE) of the mean. The data were analysed using a paired Student's t-test where necessary. A p-value ≤0.05 was considered to indicate a statistically significant difference between groups.

RESULTS

Butyrate (>4 mM) inhibited cell viability and induced cellular apoptosis and necrosis. It inhibited cyclin B1 but stimulated p21 and p27 expression. Butyrate stimulated ROS production and hemeoxygenase-1 (HO-1) expression as well as activated the Ac-H3, p-ATM, p-ATR, p-Chk1, p-Chk2, p-p38 and p-Akt expression of endothelial cells. Butyrate stimulated ICAM-1 mRNA/protein expression and significant sICAM-1 production (p < .05). Superoxide dismutase, 5z-7oxozeaenol, SB203580 and compound C (p <  .05), but not ZnPP, CGK733, AZD7762 or LY294002, attenuated butyrate cytotoxicity to endothelial cells. Notably, little effect on butyrate-stimulated sICAM-1 secretion was found. Valproic acid, phenylbutyrate and trichostatin (three histone deacetylase inhibitors) significantly induced sICAM-1 production (p < .05).

CONCLUSION

Butyric acid inhibited proliferation, induced apoptosis, stimulated ROS and HO-1 production and increased ICAM-1 mRNA expression and protein synthesis in endothelial cells. Cell viability affected by BA was diminished by some inhibitors; however, the increased sICAM-1 secretion by BA was not affected by any of the tested inhibitors. These results facilitate understanding of the pathogenesis, prevention and treatment of pulpal/periapical diseases.

The Toxicity of Universal Dental Adhesives: An In Vitro Study

There is no consensus in the literature regarding the potential toxicity of universal dental adhesives (UDA). Being used in close proximity to the pulp, their biocompatibility should be an important factor in dental research. The aim of the present study was to evaluate the biocompatibility of UDA in an in vitro model. The study was performed using a monocyte/macrophage peripheral blood SC cell line (ATCC CRL-9855) on four specific UDA, namely: All-Bond Universal (Bisco); CLEARFIL Universal Bond Quick (Kuraray); G-Premio BOND (GC); Single Bond Universal (3M ESPE). The cytotoxicity of the investigated UDA was measured using the XTT colorimetric assay. The genotoxicity of the analyzed compounds was evaluated using an alkaline version of the comet assay. Furthermore, flow cytometry (FC) apoptosis detection was performed using the FITC Annexin V Apoptosis Detection Kit I. FC cell-cycle arrest assessment was performed using propidium iodide staining. The study observed significant differences in the toxicity of the UDA that were tested, as G-Premio BOND showed significant in vitro toxicity in all of the tests performed, while All-Bond Universal, CLEARFIL Universal Bond Quick and Single Bond Universal did not present any significant toxic effects toward SC cell line. The in vitro toxicity of UDA should be taken into consideration prior to in vivo and clinical studies. The flow cytometry could improve the accuracy of dental materials research and should be incorporated into the standardization criteria.

Biofriendly molecular and protein release substrate with integrated piezoelectric motivation and anti-oxidative stress capabilities

Self-powered piezoelectrically active molecular or protein delivery devices have provoked great interest in recent years. However, electric fields used to promote delivery or healing may also induce the redox of water or oxygen to generate reactive oxygen species (ROS) and bring unintended oxidative pressure to the organism and harm biological functions. In addition, protein molecules are easily inactivated in the polymer reservoir matrix due to the pull of strong electrostatic effects. In this study, a multifunctional molecular delivery substrate was fabricated by integrating a piezoelectric-dielectric polymeric substrate, nanoscopic polyelectrolyte films and in-film deposited biomimetic porous CaP coating. The piezoelectric substrate promoted molecular release, and the mineralized coating effectively stored molecules or proteins and simultaneously eliminated ROS, reducing the oxidative stress response generated by oxidative pressure. The present work opens a new way for the development of multifunctional and biofriendly drug delivery devices.

Evaluation of the cytocompatibility of methacrylate resin-based root canal sealers with osteoblast-like cells

This study compared the cytocompatibilities of three methacrylate resin-based root canal sealers [MetaSEAL Soft (MSS), Hybrid Root SEAL (HRS), and Superbond Sealer (SBS)] in either freshly mixed or set conditions using the Kusa A1 osteoblastic cell line. The three sealers and an epoxy resin-based sealer (AH Plus; AHP) were extracted in culture medium; cell growth and osteogenic properties were analyzed. Cell adhesion on set sealers was analyzed with scanning electron microscopy. The respective extents of cell growth were as follows in freshly mixed and set sealer extracts: SBS>MSS>AHP>HRS and SBS=AHP>MSS>HRS. Light irradiation of MSS and HRS increased the cell growth of set sealer extracts. Set SBS, MSS, and AHP did not alter expression of osteogenic genes or formation of mineralized nodules. Attached cells were observed only on SBS. In conclusion, the four sealers exhibited varying degrees of compatibility to osteoblasts; SBS and HRS were the most and least compatible, respectively.

Elution behavior of a 3D-printed, milled and conventional resin-based occlusal splint material

OBJECTIVE

The elution of unpolymerized (co-)monomers and additives from methacrylic resin-based materials like polymethyl methacrylate (PMMA) can cause adverse side effects, such as mutagenicity, teratogenicity, genotoxicity, cytotoxicity and estrogenic activity. The aim of this study was to quantify the release and the cytotoxicity of residual (co-)monomers and additives from PMMA-based splint materials under consideration of real splint sizes. Three different materials used for additive (3D printing), subtractive (milling) and conventional (powder and liquid) manufacturing were examined.

METHODS

The splint materials SHERAprint-ortho plus (additive), SHERAeco-disc PM20 (subtractive) and SHERAORTHOMER (conventional) were analysed. 16 (n = 4) sample discs of each material (6 mm diameter and 2 mm height) were polished on the circular and one cross-section area and then eluted in both distilled water and methanol. The discs were incubated at 37 °C for 24 h or 72 h and subsequently analysed by gas chromatography/mass spectrometry (GC/MS) for specifying and quantifying released compounds. XTT-based cell viability assays with human gingival fibroblasts (HGFs) were performed for Tetrahydrofurfuryl methacrylate (THFMA), 1,4-Butylene glycol dimethacrylate (BDDMA) and Tripropylenglycol diacrylate (TPGDA). In order to project the disc size to actual splint sizes in a worst-case scenario, lower and upper jaw occlusal splints were designed and volumes and surfaces were measured.

RESULTS

For SHERAeco-disc PM20 and for SHERAORTHOMER no elution was determined in water. SHERAprint-ortho plus eluted the highest THFMA concentration of 7.47 μmol/l ±2,77 μmol/l after 72 h in water. Six (co-)monomers and five additives were detected in the methanol eluates of all three materials tested. The XTT-based cell viability assays resulted in a EC₅₀ of 3006 ± 408 μmol/l for THFMA, 2569.5 ± 308 μmol/l for BDDMA and 596.7 ± 88 μmol/l for TPGDA.

SIGNIFICANCE

With the solvent methanol, released components from the investigated splint materials exceeded cytotoxic concentrations in HGFs calculated for a worst-case scenario in splint size. In the water eluates only the methacrylate THFMA could be determined from SHERAprint-ortho plus in concentrations below cytotoxic levels in HGFs.

Evaluation of the cytotoxic and genotoxic effects of different universal adhesive systems

Objectives:

The objective of this study was to evaluate and compare the cytotoxicity and genotoxicity of different universal adhesive systems in the mouse fibroblast cell line L929.

Materials and Methods:

L929 (mouse fibroblast) cells were exposed to G-Premio Bond (GPB) (GC Europe, Belgium), Prime&Bond Universal (Dentsply Sirona, USA), Universal Bond Quick (Kuraray, USA), Single Bond (SB) Universal (3M ESPE, USA), and Tokuyama Universal Bond (TB) (Tokuyama, USA). Cell viability was assessed by the 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide test, whereas oxidative DNA damage was assessed by determining the 8-hydroxydeoxyguanosine level using an enzyme-linked immunoassay kit. Statistical analysis was performed by one-way analysis of variance, followed by Bonferroni post hoc tests.

Results:

Cytotoxic and genotoxic effects of TB and SB Universal groups were significantly higher than the other groups (P < 0.05). Among the adhesives tested, GPB (93.0 ± 1.3) had the least cytotoxicity, while TB (67.3 ± 3.0) had the most cytotoxic effect. In terms of genotoxicity, GPB (2.2 ± 0.3) had the least genotoxic effect, while Tokuyama Bond Universal (4.17 ± 0.4) had the most genotoxic effect.

Conclusions:

Universal adhesive systems used in dentistry have cytotoxic and genotoxic effects in live cells. Universal adhesive systems should, therefore, be used with caution due to their cytotoxic and genotoxic effects in clinical applications.

The Effect of Selected Dental Materials Used in Conservative Dentistry, Endodontics, Surgery, and Orthodontics as Well as during the Periodontal Treatment on the Redox Balance in the Oral Cavity

Oxidative stress (OS) is a redox homeostasis disorder that results in oxidation of cell components and thus disturbs cell metabolism. OS is induced by numerous internal as well as external factors. According to recent studies, dental treatment may also be one of them. The aim of our work was to assess the effect of dental treatment on the redox balance of the oral cavity. We reviewed literature available in PubMed, Medline, and Scopus databases, including the results from 2010 to 2020. Publications were searched according to the keywords: oxidative stress and dental monomers; oxidative stress and amalgam; oxidative stress and periodontitis, oxidative stress and braces, oxidative stress and titanium; oxidative stress and dental implants, oxidative stress and endodontics treatment, oxidative stress and dental treatment; and oxidative stress and dental composite. It was found that dental treatment with the use of composites, amalgams, glass-ionomers, materials for root canal filling/rinsing, orthodontic braces (made of various metal alloys), titanium implants, or whitening agents can disturb oral redox homeostasis by affecting the antioxidant barrier and increasing oxidative damage to salivary proteins, lipids, and DNA. Abnormal saliva secretion/composition was also observed in dental patients in the course of OS. It is suggested that the addition of antioxidants to dental materials or antioxidant therapy applied during dental treatment could protect the patient against harmful effects of OS in the oral cavity.

Dental resin monomers induce early and potent oxidative damage on human odontoblast-like cells

Resin-based dental materials consist of filler particles and different monomers that are light cured in situ to re-establish dental function and aesthetics. Due to the degree of conversion of adhesive polymers, the monomers triethyleneglycol dimethacrylate (TEGDMA) and 2-hydroxyethyl methacrylate (HEMA) are released in relatively high amounts and are susceptible to degradation, acting as bioactive compounds and affecting cell and tissues. This study aimed to assess the effect of HEMA and TEGDMA exposure on metabolic activity, membrane integrity, and cell survival of human odontoblast-like cell (hOLCs). Exposure to resin monomers for 24 h induced major changes in cell membrane integrity, metabolic activity, and survival, which were measured by the calcein method and lactate dehydrogenase release. Increased and early reactive oxygen species (ROS) production was observed leading to degradative oxidation of membrane lipids identified as malondialdehyde production. Severe alteration in mitochondria occurred due to transmembrane mitochondrial potential collapse, possibly inducing activation of apoptotic cell death. hOLCs exposure to resin monomers modified the cell redox potential, with consequences on membrane permeability and integrity, including mitochondrial function. Lipid peroxidation appears to be a key phenomenon for the membrane structures oxidation after HEMA and TEGDMA exposure, leading to cell death and cytotoxicity. hOLCs respond early by differential induction of adaptive mechanisms to maintain cell homeostasis. Modulation of oxidative stress-induced response involves the regulation of genes that encode for antioxidant proteins such as catalase and heme oxygenase-1; regulation that functions as a critical protection mechanism against oxidative cell damage induced by HEMA and TEGDMA. Ascorbic acid as an antioxidant substance mitigates the oxidative damage associated with exposure to monomers.

Mitochondrial Dysfunction and Kidney Stone Disease

Mitochondrion is a pivotal intracellular organelle that plays crucial roles in regulation of energy production, oxidative stress, calcium homeostasis, and apoptosis. Kidney stone disease (nephrolithiasis/urolithiasis), particularly calcium oxalate (CaOx; the most common type), has been shown to be associated with oxidative stress and tissue inflammation/injury. Recent evidence has demonstrated the involvement of mitochondrial dysfunction in CaOx crystal retention and aggregation as well as Randall’s plaque formation, all of which are the essential mechanisms for kidney stone formation. This review highlights the important roles of mitochondria in renal cell functions and provides the data obtained from previous investigations of mitochondria related to kidney stone disease. In addition, mechanisms for the involvement of mitochondrial dysfunction in the pathophysiology of kidney stone disease are summarized. Finally, future perspectives on the novel approach to prevent kidney stone formation by mitochondrial preservation are discussed.

N-Acetyl Cysteine Modulates the Inflammatory and Oxidative Stress Responses of Rescued Growth-Arrested Dental Pulp Microtissues Exposed to TEGDMA in ECM

Dental pulp is exposed to resin monomers leaching from capping materials. Toxic doses of the monomer, triethyleneglycol dimethacrylate (TEGDMA), impact cell growth, enhance inflammatory and oxidative stress responses, and lead to tissue necrosis. A therapeutic agent is required to rescue growth-arrested tissues by continuing their development and modulating the exacerbated responses. The functionality of N-Acetyl Cysteine (NAC) as a treatment was assessed by employing a 3D dental pulp microtissue platform. Immortalized and primary microtissues developed and matured in the extracellular matrix (ECM). TEGDMA was introduced at various concentrations. NAC was administered simultaneously with TEGDMA, before or after monomer addition during the development and after the maturation stages of the microtissue. Spatial growth was validated by confocal microscopy and image processing. Levels of inflammatory (COX2, NLRP3, IL-8) and oxidative stress (GSH, Nrf2) markers were quantified by immunoassays. NAC treatments, in parallel with TEGDMA challenge or post-challenge, resumed the growth of the underdeveloped microtissues and protected mature microtissues from deterioration. Growth recovery correlated with the alleviation of both responses by decreasing significantly the intracellular and extracellular levels of the markers. Our 3D/ECM-based dental pulp platform is an efficient tool for drug rescue screening. NAC supports compromised microtissues development, and immunomodulates and maintains the oxidative balance.

Biological activities of a recombinant fortilin from Fenneropenaeus merguiensis

Human Fortilin, an antiapoptotic protein, has also been implicated in several diseases; however, several potential uses of fortilin have also been proposed. Bearing the implications of fortilin in mind, fortilin analog, which has no complication with diseases, is required. Since a recombinant full-length fortilin from Fenneropenaeus merguiensis (rFm-Fortilin (FL)) reported only 44% (3e-27) homologous to human fortilin, therefore the biological activities of the Fm-Fortilin (FL) and its fragments (F2, F12, and F23) were investigated for potential use against HEMA toxicity from filling cement to pulp cell. The rFm-Fortilin FL, F2, 12, and F23 were expressed and assayed for proliferation activity. The rFm-Fortilin (FL) showed proliferation activity on human dental pulp cells (HDPCs) and protected the cells from 2-hydroxy-ethyl methacrylate (HEMA) at 1-20 ng/ml. In contrast, none of the rFm-Fortilin fragments promoted HDPC growth that may be due to a lack of three conserved amino acid residues together for binding with the surface of Rab GTPase for proliferative activity. In addition, rFm-Fortilin (FL) activated mineralization and trend to suppressed production of proinflammatory cytokines, including histamine (at 10 ng/ml) and TNF-α (at 100 ng/ml). Besides, the rFm-Fortilin (FL) did not mutate the Chinese hamster ovary (CHO) cell. Therefore, the rFm-Fortilin (FL) has the potential use as a supplementary medical material to promote cell proliferation in patients suffering severe tooth decay and other conditions.

Cytotoxicity evaluation of eluates from universal adhesives by real-time cell analysis

The aim of this study was to evaluate the cytotoxicity of universal adhesives on L929 mouse fibroblast cell line by using a real-time cell analysis. In order to obtain extract, six different cured dental adhesives were immersed in Dulbecco's Modified Eagle's Medium (DMEM) at 37°C for 24 h. A real-time cell analysis system was used to assess cytotoxicity of the dental adhesives. After seeding 25,000 cells/300 μL/well cell suspensions into the wells of an e-plate, fibroblasts were exposed to extracts of tested adhesives at varying dilutions (1:1, 1:2, and 1:10) and observed at every 30 min intervals for 72 h. Three-way ANOVA one factor repeated measures were used to analyze the results (α=0.05). All tested adhesives induced cell viability loss, cell morphology alteration, and cell death depending on extract concentration and time. Cell viability of L929 cells to between 44 and 10% for 1:1 diluted extracts, at 72 h, when compared to the negative control.

In vitro effects of dental monomer exposure - Dependence on the cell culture model

Methacrylate monomers are major components of resin-based biomaterials. The polymerization of these materials is never complete, and methacrylates leaking from cured materials cause exposure of patients. Only some selected methacrylates have thoroughly been tested for possible interaction with living cells. In the current study, we compared the effects of 2-hydroxyethyl-methacrylate (HEMA; a carefully studied methacrylate) and hydroxypropyl-methacrylate (HPMA; a scarcely investigated methacrylate). Five cell lines differing in both source and cell type were used. The cells were exposed to methacrylates (1-8 mM). Cell viability, cell death, glutathione levels, reactive oxygen species (ROS), and cell growth pattern were measured. Both methacrylates reduced cell viability, and glutathione depletion was observed in all cell lines. The cell death pattern varied among the cell lines. The ROS levels and cell growth pattern also differed between the cell lines after exposure to methacrylate monomers. No difference between HEMA and HPMA exposures were observed in any of the cell lines. The variation between cell lines shows that the measured methacrylate toxicity depends heavily on the test system chosen. Further, the conformity between HEMA and HPMA effects suggests that the two methacrylates similarly affect living cells.

Chemistry of novel and contemporary resin-based dental adhesives

The chemistry of resin-based dental adhesives is critical for its interaction with dental tissues and long-term bonding stability. Changes in dental adhesives composition influences the materials' key physical-chemical properties, such as rate and degree of conversion, water sorption, solubility, flexural strength and modulus, and cohesive strength and improves the biocompatibility to dental tissues. Maintaining a suitable reactivity between photoinitiators and monomers is important for optimal properties of adhesive systems, in order to enable adequate polymerisation and improved chemical, physical and biological properties. The aim of this article is to review the current state-of-the-art of dental adhesives, and their chemical composition and characteristics that influences the polymerisation reaction and subsequent materials properties and performance.

Significance of manganese resistant bacillus cereus strain WSE01 as a bioinoculant for promotion of plant growth and manganese accumulation in Myriophyllum verticillatum

Endophytic bacteria are generally helpful for plant growth and protection. Strain WSE01, which was identified as bacillus cereus, was isolated from the stem of Myriophyllum verticillatum and it displayed a high tolerance to Mn (1500 mg/L). The strain was found to be able to produce indole-3-acetic acid (IAA) and siderophores, fix the atmospheric nitrogen and dissolve potassium from insoluble K-bearing minerals. In hydroponic culture experiments, the inoculation of strain WSE01 significantly promoted the growth and increased the leaf enzyme activity in the inoculated plant M. verticillatum. Furthermore, the manganese content was increased by 36.4% in stems and by 54.7% in leaves of the inoculated plant under Mn stress at 400 mg/L, compared to the non-inoculated group. This study suggests that the strain WSE01 has the potential to be used as biocontrol and/or biofertilizing agents for application in macrophyte M. verticillatum and conduces to achieving more effective phytoremediation of metal-contaminated waters.

Cytotoxicity and genotoxicity of DMABEE, a co-photoinitiator of resin polymerization, on CHO-K1 cells: Role of redox and carboxylesterase

The 4-dimethylaminobenzoic acid ethyl ester (DMABEE) is an important co-initiator for resin polymerization in dental resinous materials. As a radical forming chemical with high lipophilicity, the genotoxicity and cytotoxicity of DMABEE deserve prudent investigation. In this study, we found that DMABEE reduced the viability and proliferation of Chinese hamster ovary (CHO-K1) cells in a dose-dependent manner, and altered cell morphology at higher concentrations. G0/G1 cell cycle arrest was induced by DMABEE at 0.25-0.75 mM, and cell proportion of sub-G0/G1 phase was significantly elevated at 1 mM while cell apoptosis was observed. Genotoxic effect was noted when cells were treated by 0.1 mM DMABEE, as revealed by increase of micronucleus formation. Reactive oxygen species overproduction was observed as cells treated with 0.75 and 1 mM, while elevation of intracellular glutathione was noticeable since 0.1 mM. Contrary to our expectation, pretreatment by N-acetyl-l-cysteine enhanced the toxicity of DMABEE on CHO-K1 cells. Catalase mildly reduced the toxic effect and carboxylesterase showed obvious ability to reverse the toxicity of DMABEE. These findings highlight the mechanism of DMABEE toxicity and provide clues for safety improvement of its application in clinical dental treatment.

A Novel Role of Ascorbic Acid in Anti-Inflammatory Pathway and ROS Generation in HEMA Treated Dental Pulp Stem Cells

Resin (co)monomers issued from restorative dental materials are able to distribute in the dental pulp or the gingiva, to get to the saliva and to the flowing blood. Many authors have recently shown that methacrylate-based resins, in particular 2-hydroxyethylmethacrylate (HEMA), are responsible of inflammatory and autophagic processes in human dental pulp stem cells (hDPSCs) while ascorbic acid (AS), an antioxidant molecule, can assume a protective role in cell homeostasis. The purpose of the current work was to study if 50 µg/mL AS can affect the inflammatory status induced by 2 mM HEMA in hDPSCs, a tissue–specific cell population. Cell proliferation, cytokine release, morphological arrangement and reactive oxygen species (ROS) formation were determined respectively by MTT, ELISA, morphological analysis and dichlorofluorescein assay. The hDPSCs exposed to HEMA let to an increment of ROS formation and in the expression of high levels of inflammatory mediators such as nuclear factor-κB (NFkB), inflammatory cytokines such as interleukin IL6, IL8, interferon (IFN)ɣ and monocyte chemoattractant protein (MCP)1. Moreover, HEMA induced the up-regulation of pospho-extracellular signal–regulated kinases (pERK)/ERK signaling pathway associated to the nuclear translocation. AS treatment significantly down-regulated the levels of pro-inflammatory mediators. Then, the natural product AS reduced the detrimental result promoted by methacrylates in clinical dentistry, in fact restore cell proliferation, reduce the pro-inflammatory cytokine, downregulate ROS production and of NFkB/pERK/ERK signaling path. In synthesis, AS, could improve the quality of dental care and play a strategic role as innovative endodontic compound easy to use and with reasonable cost.

Polymethyl methacrylate does not adversely affect the osteogenic potential of human adipose stem cells or primary osteoblasts

Custom-made polymethyl methacrylate (PMMA) bone cement is used to treat cranial bone defects but whether it is cytotoxic is still unsure. Possible PMMA-induced adverse effects in vivo affect mesenchymal stem cells and osteoblasts at the implant site. We aimed to investigate whether PMMA affects osteogenic and osteoclast activation potential of human mesenchymal stem cells and/or osteoblasts. Immediately after polymerization, PMMA was added to cultured human adipose stem cells (hASCs) or human osteoblasts (hOBs). Medium lactate dehydrogenase was measured (day 1), metabolic activity, proliferation, osteogenic and osteoclast-activation marker expression (day 1 and 7), and mineralization (day 14). PMMA did not affect lactate dehydrogenase, KI67 gene expression, or metabolic activity in hASCs and hOBs. PMMA transiently decreased DNA content in hOBs only. PMMA increased COL1 gene expression in hASCs, but decreased RUNX2 in hOBs. PMMA did not affect osteocalcin or alkaline phosphatase (ALP) expression, ALP activity, or mineralization. Only in hOBs, PMMA decreased RANKL/OPG ratio. In conclusion, PMMA is not cytotoxic and does not adversely affect the osteogenic potential of hASCs or hOBs. Moreover, PMMA does not enhance production of osteoclast factors by hASCs and hOBs in vitro. Therefore, PMMA bone cement seems highly suitable to treat patients with cranial bone defects.

Glutathione-Depleting Pro-Oxidant as a Selective Anticancer Therapeutic Agent

A main challenge in the development of anticancer drugs that eradicate cancer cells specifically with minimal toxicity to normal cells is to identify the cancer-specific properties. Cancer cells sustain a higher level of reactive oxygen species, owing to metabolic and signaling aberrations and unrestrained growth. Cancer cells are also furnished with a powerful reducing environment, owing to the overproduction of antioxidants such as glutathione (GSH). Therefore, the altered redox balance is probably the most prevailing property of cancer cells distinct from normal cells, which could serve as a plausible therapeutic target. In this work, we developed a GSH-depleting pro-oxidant, benzoyloxy dibenzyl carbonate, termed B2C, which is capable of rapidly declining GSH and elevating oxidative stress to a threshold level above which cancer cells cannot survive. B2C was designed to release quinone methide (QM) that rapidly depletes GSH through esterase-mediated hydrolysis. B2C was able to rapidly deplete GSH and induce an overwhelming level of oxidative stress in cancer cells, leading to mitochondrial disruption, activation of procaspase-3 and PARP-1, and cleavage of Bcl-2. In the study of tumor xenograft models, intravenously injected B2C caused apoptotic cell death in tumors and significantly suppressed tumor growth. These findings provide a new insight into the design of more effective anticancer drugs, which exploit altered redox balance in cancer cells.

Pulp Fibroblast Cell Apoptosis After Application of Hema Dentine Bonding Material with Ethanol and Water Solvent

The most common main materials for dentin bonding for composite resin restoration is 2-hydroxyethyl methacrylate (HEMA). HEMA has beneficial physical and chemical properties, and stable, yet toxic. The addition of ethanol or water, may reduce the toxic effect of HEMA. Ethanol solvent has lower H-bonding capacity compared to water solvent, so it can bind less free radicals from the residual monomer. This study aimed to analyze apoptosis due to dentine bonding application with ethanol and water solvent. Fibroblast culture cells were obtained from extracted third molar, by means of tripsinasion method. The cells were divided into 4 groups as reached confluent: cell culture without treatment as control, cell culture with scaffold chitosan, cell culture with scaffold and polymerized dentin bonding with ethanol or water solvent. Apoptosis observation was conducted using immunohistochemistry method with ethidium bromide acridin orange staining, under fluorescent microscope with 40´ magnification. There was a significant difference among groups (p=0.0001), yet no differences found between different solvent. Apoptosis rate in fibroblast cells culture exposed to HEMA bonding with ethanol solvent was 67%, while the cells exposed to HEMA bonding with water solvent was 44%. The effect of dentin bonding with ethanol solvent and water solvent towards apoptosis rate of pulp fibroblast cells is not different.

Effects of HEMA on Nrf2-related gene expression using a newly developed 3D co-culture model of the oral mucosa

OBJECTIVE

2-Hydroxyethyl methacrylate (HEMA) is a component of many resin-modified materials and elutes from dental restorations into the oral cavity. Objective of our investigation was to determine the impact of HEMA on oral keratinocytes (OKF6/TERT2) and gingival fibroblasts (HGFs) in a newly established 3D co-culture model (3D-CCM) and to analyze the permeability of OKF6/TERT2 cells for HEMA.

METHODS

Well-characterized 3D-CCMs, consisting of confluent OKF6/TERT2 cells on cell culture inserts above HGF-containing collagen gels, were treated supra-epithelial with HEMA. Mass spectrometry was used to measure the supra- and sub-epithelial distribution of HEMA after 24 h. The impact of HEMA on nuclear factor erythroid 2-related factor 2 (Nrf2) target genes was measured by qRT-PCR and western blot analysis.

RESULTS

Mass spectrometry showed that HEMA was evenly distributed above and below the keratinocyte layer after 24 h. Analyzed target genes of Nrf2 were induced in both cell types on the mRNA-level but less pronounced in HGFs. On the protein-level, both cell types showed similar effects: At 5 mM HEMA, heme oxygenase-1 was induced 5.1-fold in OKF6/TERT2 cells and 4.1-fold in HGFs. NAD(P)H quinone dehydrogenase-1 was approximately induced 1.85-fold in both cell types.

SIGNIFICANCE

Our 3D-CCM is suitable to analyze the biocompatibility of dental materials due to an improved simulation of the oral mucosa compared to monolayer cultures. Our results indicate that HEMA is able to penetrate a dense layer of keratinocytes and to activate the cellular oxidative defense response. This may be due to the activation of the Nrf2-pathway in both cell types.

Short-term "in vivo" study on cellular DNA damage induced by acrylic Andresen activator in oral mucosa cells

OBJECTIVES

To analyse through comet assay and micronucleus test the viability and DNA damage occurred in buccal mucosa epithelial cells after a short-term exposure to Andresen activator resin monomers.

SETTING AND SAMPLE POPULATION

Test group consisting of 26 subjects was treated with Andresen activator; 16 subjects who had never undergone orthodontic treatment were enrolled in the control group.

MATERIAL & METHODS

Buccal mucosa samples were collected before treatment and after 7, 15, 30, 60 and 90 days. The analyses performed on the cells included the following: cellular viability, comet assay and micronucleus test. Mean ± SD were calculated for cellular viability, tail moment, tail intensity, tail length, micronuclei, binuclear and bud cells. Significance (P < 0.05) was evaluated with Dunnett's test.

RESULTS

Cellular viability did not change during observational time, and its trend was similar to the controls. Tail moment and tail intensity significantly increased after 30 and 60 days, respectively, whereas tail length remained unchanged over time in the test group; the same parameters did not change in the control group. In the test group, micronuclei, binuclear and bud cells significantly increased after 30, 60 and 90 days, respectively.

CONCLUSION

The resin monomers of the Andresen activator cause genotoxic effects detectable through comet assay and micronucleus test, but they do not produce clear cytotoxic effects after a 90 days exposure.

Effects of Restorative Materials on Dental Pulp Stem Cell Properties

INTRODUCTION

Dental pulp stem cells (DPSCs) are multipotent progenitors for biotechnological practices, but the influences of existing restorations on their viability and differentiation are not well-known. This study was aimed to investigate in vivo and in vitro responses of DPSCs to restorative materials.

METHODS

Class I cavities were prepared on molars scheduled to be extracted and then restored with a resin-based composite (RBC), a glass ionomer cement, or zinc oxide eugenol. Intact teeth were used as controls. Twelve molars in each group were extracted on day 7 or day 30 after restorations to assess the early or intermediate pulp responses and were then cut in half. One half was processed for histopathological analysis, and the other was used to isolate DPSCs for a colony-forming unit assay and real-time polymerase chain reaction for NANOG, OCT4, and CD44 expression.

RESULTS

All restored teeth showed pulp damage at various levels, whereas mild to moderate inflammation persisted in the RBC group until day 30. The existence of DPSCs in the pulp cores of all groups was revealed based on CD44 immunoreactivity. Glass ionomer cement and zinc oxide eugenol did not affect the relative percentages of DPSCs in either early or intermediate stages, whereas RBCs reduced the percentage. The colony-forming units in all restoration groups were comparable with those in the control. Nevertheless, the restorations significantly enhanced OCT4 expression, especially in RBC/day 30.

CONCLUSIONS

Dental restorations cause mild pulp damage but do not affect DPSC viability. RBC decreases DPSC densities but might increase the stemness of surviving DPSCs through an inflammation-stimulation process.

Effects of triethylene glycol dimethacrylate and hydroxyethyl methacrylate on macrophage polarization

AIM

To evaluate the effects of hydrophilic dental resin monomers, triethylene glycol dimethacrylate (TEGDMA) and hydroxyethyl methacrylate (HEMA), on the polarization of a human monocyte cell line (THP-1).

METHODOLOGY

THP-1 cells were treated with resin monomers at noncytotoxic concentrations for 48 h and were analysed for CD86 and CD206 expressions using flow cytometry. The cells were stimulated for polarization in the presence of resin monomers (co-treatment) or after treatment with monomers (pre-treatment). CD86 and CD206 mRNA in co-treated cells was evaluated using quantitative real-time polymerase chain reaction. The release of TNF-α and TGF-β by pre-treated and co-treated cells was assessed using enzyme-linked immunosorbent assay. Morphological changes of macrophages during polarization were observed using bright-field microscopy. One-way analysis of variance was used for statistical analysis.

RESULTS

TEGDMA (1 mmol L^-1 ) and HEMA (2 mmol L^-1 ) did not induce CD86 and CD206 expressions in THP-1 cells but rather inhibited their expressions in the co-treated cells. The inhibitory effects also appeared at the transcription level. However, the expression of surface markers was not affected by pre-treatment with resin monomers. The release of TNF-α and TGF-β by M1- and M2-stimulated cells, respectively, was suppressed by co-treatment (P < 0.05). Microscopic studies revealed that co-treatment with resin monomers suppressed polarization-associated morphological changes such as cell volume increase.

CONCLUSIONS

TEGDMA and HEMA inhibited macrophage polarization to both M1 and M2 at the transcription level, and the inhibitory effects disappeared upon the removal of resin monomers from the cell culture.

New silyl-functionalized BisGMA provides autonomous strengthening without leaching for dental adhesives

Resin-based composite has overtaken dental amalgam as the most popular material for direct restorative dentistry. In spite of this popularity the clinical lifetime of composite restorations is threatened by recurrent decay. Degradation of the adhesive leads to gaps at the composite/tooth interface-bacteria, bacterial by-products and fluids infiltrate the gaps leading to recurrent decay and composite restoration failure. The durability of resin-dentin bonds is a major problem. We address this problem by synthesizing silyl-functionalized BisGMA (e.g., silyl-BisGMA), formulating dental adhesives with the new monomer and determining the physicochemical properties and leaching characteristics of the silyl-BisGMA adhesives. Silyl-BisGMA was synthesized by stoichiometric amounts of BisGMA and 3-isocyanatopropyl trimethoxysilane (IPTMS). The control adhesive was a mixture based on HEMA/BisGMA (45/55, w/w). In the experimental formulations, BisGMA was partially or completely replaced by silyl-BisGMA. Water miscibility, polymerization behavior (Fourier transform infrared spectroscopy, FTIR), thermal property (modulated differential scanning calorimetry, MDSC), mechanical properties in dry and wet conditions (dynamic mechanical analysis, DMA), and leached species (HPLC) were investigated. Data from all tests were submitted to appropriate statistical analysis (α = 0.05). Silyl-BisGMA-containing adhesives exhibited comparable water miscibility, lower viscosities, and significantly improved degree of conversion of CC bond as compared to the control. After 4 weeks aqueous aging, the glass transition temperature and rubbery moduli of the experimental copolymers were significantly greater than the control (p < 0.05). HPLC results indicated a substantial reduction of leached HEMA (up to 99 wt%) and BisGMA (up to 90 wt%). By introducing silyl-functional group, the new BisGMA derivative exhibited potential as a monomer that can lead to dental adhesives with improved mechanical properties and reduced leaching under conditions relevant to the oral environment. STATEMENT OF SIGNIFICANCE: The low-viscosity adhesive that bonds the composite to the tooth (enamel and dentin) is intended to seal and stabilize the composite/tooth interface, but it degrades leading to a breach at the composite/tooth margin. As the most popular crosslinking monomer in adhesives, Bisphenol A-glycerolate dimethacrylate (BisGMA) has limitations, e.g. susceptible to hydrolysis and concomitant property degradation. A methoxysilyl-functionalized BisGMA derivative (silyl-BisGMA) was introduced in this work to respond to these limitations. Our results indicated that by introducing silyl-BisGMA, higher crosslinked networks were obtained without sacrificing the homogeneity, and the leached amount of HEMA was reduced up to 99%. This novel resin offers potential benefits including prolonging the functional lifetime of dental resin materials.

Butyrate Stimulates Histone H3 Acetylation, 8-Isoprostane Production, RANKL Expression, and Regulated Osteoprotegerin Expression/Secretion in MG-63 Osteoblastic Cells

Butyric acid as a histone deacetylase (HDAC) inhibitor is produced by a number of periodontal and root canal microorganisms (such as Porphyromonas, Fusobacterium, etc.). Butyric acid may affect the biological activities of periodontal/periapical cells such as osteoblasts, periodontal ligament cells, etc., and thus affect periodontal/periapical tissue destruction and healing. The purposes of this study were to study the toxic effects of butyrate on the matrix and mineralization marker expression in MG-63 osteoblasts. Cell viability was determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay. Cellular apoptosis and necrosis were analyzed by propidium iodide/annexin V flow cytometry. The protein and mRNA expression of osteoprotegerin (OPG) and receptor activator of nuclear factor kappa-B ligand (RANKL) were analyzed by Western blotting and reverse transcriptase-polymerase chain reaction (RT-PCR). OPG, soluble RANKL (sRANKL), 8-isoprostane, pro-collagen I, matrix metalloproteinase-2 (MMP-2), osteonectin (SPARC), osteocalcin and osteopontin (OPN) secretion into culture medium were measured by enzyme-linked immunosorbant assay. Alkaline phosphatase (ALP) activity was checked by ALP staining. Histone H3 acetylation levels were evaluated by immunofluorescent staining (IF) and Western blot. We found that butyrate activated the histone H3 acetylation of MG-63 cells. Exposure of MG-63 cells to butyrate partly decreased cell viability with no marked increase in apoptosis and necrosis. Twenty-four hours of exposure to butyrate stimulated RANKL protein expression, whereas it inhibited OPG protein expression. Butyrate also inhibited the secretion of OPG in MG-63 cells, whereas the sRANKL level was below the detection limit. However, 3 days of exposure to butyrate (1 to 8 mM) or other HDAC inhibitors such as phenylbutyrate, valproic acid and trichostatin stimulated OPG secretion. Butyrate stimulated 8-isoprostane, MMP-2 and OPN secretion, but not procollagen I, or osteocalcin in MG-63 cells. Exposure to butyrate (2⁻4 mM) for 3 days markedly stimulated osteonectin secretion and ALP activity. In conclusion, higher concentrations of butyric acid generated by periodontal and root canal microorganisms may potentially induce bone destruction and impair bone repair by the alteration of OPG/RANKL expression/secretion, 8-isoprostane, MMP-2 and OPN secretion, and affect cell viability. However, lower concentrations of butyrate (1⁻4 mM) may stimulate ALP, osteonectin and OPG. These effects are possibly related to increased histone acetylation. These events are important in the pathogenesis and repair of periodontal and periapical destruction.