Synthesis of photoreactive pullulan for surface modification

Oriented display of cello-oligosaccharides for pull-down binding assays to distinguish binding preferences of glycan binding proteins

The production of biofuels from lignocellulosic biomass using carbohydrate-active enzymes like cellulases is key to a sustainable energy production. Understanding the adsorption mechanism of cellulases and associated binding domain proteins down to the molecular level details will help in the rational design of improved cellulases. In nature, carbohydrate-binding modules (CBMs) from families 17 and 28 often appear in tandem appended to the C-terminus of several endocellulases. Both CBMs are known to bind to the amorphous regions of cellulose non-competitively and show similar binding affinity towards soluble cello-oligosaccharides. Based on the available crystal structures, these CBMs may display a uni-directional binding preference towards cello-oligosaccharides (based on how the oligosaccharide was bound within the CBM binding cleft). However, molecular dynamics (MD) simulations have indicated no such clear preference. Considering that most soluble oligosaccharides are not always an ideal substrate surrogate to study the binding of CBMs to the native cell wall or cell surface displayed glycans, it is critical to use alternative reagents or substrates. To better understand the binding of type B CBMs towards smaller cello-oligosaccharides, we have developed a simple solid-state depletion or pull-down binding assay. Here, we specifically orient azido-labeled carbohydrates from the reducing end to alkyne-labeled micron-sized bead surfaces, using click chemistry, to mimic insoluble cell wall surface-displayed glycans. Our results reveal that both family 17 and 28 CBMs displayed a similar binding affinity towards cellohexaose-modified beads, but not cellopentaose-modified beads, which helps rationalize previously reported crystal structure and MD data. This may indicate a preferred uni-directional binding of specific CBMs and could explain their co-evolution as tandem constructs appended to endocellulases to increase amorphous cellulose substrate targeting efficiency. Overall, our proposed workflow can be easily translated to measure the affinity of glycan-binding proteins to click-chemistry based immobilized surface-displayed carbohydrates or antigens.

Synthesis and Characterization of Polyethylene Glycol-Grafted Photoreactive Polyethylene Glycols for Antibiofouling Applications

Notably, antibiofouling is an important and predominant technique adopted to improve the surfaces of biomaterials. In this study, polyethylene glycol-grafted polyethylene glycols bearing azidophenyl groups were synthesized and immobilized on polystyrene surfaces via photoirradiation. The prepared polymers were found to be highly soluble in water, and photoimmobilization with fluorescent proteins was confirmed based on micropatterning using a photomask. These polymers suppressed nonspecific interactions between proteins and cells on the substrate. Considering that photoimmobilization can be adopted for the covalent bond modification of various surfaces, the developed water-soluble and highly antibiofouling polymers appear to be useful in biomaterial preparation.

Synthesis of Double Interfering Biodegradable Nano-MgO Micelle Composites and Their Effect on Parkinson's Disease

Although gene therapy targeting the α-synuclein gene (SNCA) has achieved outstanding results in the treatment of Parkinson's disease (PD), the lack of a suitable gene delivery system and inadequate therapeutic effects remains a tremendous obstacle for RNAi therapy. Here, a degradable nano-MgO micelle composite (MgO(pDNA)-INS-Plu-mRNA-NGF) with double interference (mediated by RNAi and α-synuclein (α-syn)-targeted mRNA) was constructed. Binding mRNA treatment significantly increased the inhibitory effect compared to the reduction of α-syn expression by RNAi alone. Moreover, the cell experiments demonstrated that the viability of the PD cell model can be significantly improved by nano-MgO micelle composite treatment. More importantly, the composite has the ability to penetrate the blood brain barrier and deliver genes and mRNA to neurons through endocytosis mediated by the nerve growth factor and its receptors, thus significantly downregulating the expression of α-syn in the PD mice model without causing damage to other major organs. Overall, this work provides a novel insight into the design of biomaterials for gene therapy for PD.

Paula ML, M. de Moraes R, Alves GM, M. Lacerda T, dos Santos JC, M. dos Santos A, Medeiros SDF. Chemical Modification of Pullulan Exopolysaccharide by Grafting Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) via Click Chemistry

Biodegradable and biocompatible copolymers have been often studied for the development of biomaterials for drug delivery systems. In this context, this work reports the synthesis and characterization of a novel pullulan-g-poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (Pull-g-PHBHV) graft copolymer using click chemistry. Well-defined and functional pullulan backbones containing azide groups (PullN₃) previously prepared by our group were successfully used for this purpose and propargyl-terminated poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was prepared via transesterification using propargyl alcohol as a chain transfer agent. By an alkyne-azide cycloaddition reaction catalyzed by copper (Cu (I)) (CuAAC), the graft copolymer Pull-g-PHBHV was obtained. The chemical structures of the polymers were accessed by ¹H NMR and ¹³C NMR FTIR. Disappearance of the bands referring to the main bonds evidenced success in the grafting reaction. Besides that, DRX, DSC and TGA were used in order to access the changes in crystallinity and thermal behavior of the material. The remaining crystallinity of the Pull-g-PHBHV structure evidences the presence of PHBHV. Pull-g-PHBHV presented lower degradation maximum temperature values than the starting materials, indicating its minor thermal stability. Finally, the synthesized material is an innovative biopolymer, which has never been reported in the previous literature. It is a bio-derived and biodegradable polymer, chemically modified, resulting in interesting properties which can be useful for their further applications as biomedical systems for controlled delivery, for example.

Programmed Release of Multimodal, Cross-Linked Vascular Endothelial Growth Factor and Heparin Layers on Electrospun Polycaprolactone Vascular Grafts

Viable tissue-engineering small-diameter vascular grafts should support rapid growth of an endothelial cell layer and exhibit long-term antithrombogenic property. In this study, multiple layers of various bioactive molecules, such as vascular endothelial growth factor (VEGF) and heparin, on an electrospun polycaprolactone scaffold have been developed through repeated electrostatic adsorption self-assembly (up to 20 layers), followed by genipin cross-linking. Programmed and sustained release of biomolecules embedded within the multilayered structure can be triggered by matrix metallopeptidase 2 enzyme in vitro. The result is an early and full release of VEGF to promote rapid endothelialization on the intended vascular grafts, followed by a gradual but sustained release of heparin for long-term anticoagulation and antithrombogenicity. This method of forming a biologically responsive, multimodal delivery of VEGF and heparin is highly suitable for all hydrophobic surfaces and provides a promising way to meet the critical requirements of engineered small-diameter vascular grafts.

Tuning the Density of Poly(ethylene glycol) Chains to Control Mammalian Cell and Bacterial Attachment

Surface modification of biomaterials with polymer chains has attracted great attention because of their ability to control biointerfacial interactions such as protein adsorption, cell attachment and bacterial biofilm formation. The aim of this study was to control the immobilisation of biomolecules on silicon wafers using poly(ethylene glycol)(PEG) chains by a "grafting to" technique. In particular, to control the polymer chain graft density in order to capture proteins and preserve their activity in cell culture as well as find the optimal density that would totally prevent bacterial attachment. The PEG graft density was varied by changing the polymer solubility using an increasing salt concentration. The silicon substrates were initially modified with aminopropyl-triethoxysilane (APTES), where the surface density of amine groups was optimised using different concentrations. The results showed under specific conditions, the PEG density was highest with grafting under "cloud point" conditions. The modified surfaces were characterised with X-ray photoelectron spectroscopy (XPS), ellipsometry, atomic force microscopy (AFM) and water contact angle measurements. In addition, all modified surfaces were tested with protein solutions and in cell (mesenchymal stem cells and MG63 osteoblast-like cells) and bacterial (Pseudomonas aeruginosa) attachment assays. Overall, the lowest protein adsorption was observed on the highest polymer graft density, bacterial adhesion was very low on all modified surfaces, and it can be seen that the attachment of mammalian cells gradually increased as the PEG grafting density decreased, reaching the maximum attachment at medium PEG densities. The results demonstrate that, at certain PEG surface coverages, mammalian cell attachment can be tuned with the potential to optimise their behaviour with controlled serum protein adsorption.

Preparation and characterization of latex films photo-immobilized with IFN-α

We developed a biomaterial by photo-immobilizing interferon-α (IFN-α) on the surface of latex condom films for the prevention and treatment of cervicitis, cervical cancers and diseases caused by cervical virus. The IFN-α modification by photoactive N-(4-azidobenzoyloxy) succinimide was characterized on a nano-scale by spectroscopy analysis and micro morphology. The anti-bacterial, anti-cancer, and anti-viral effects of the modified bioactive latex films were evaluated by antibacterial susceptibility testing, Gram staining, flow cytometry, immunofluorescence, and Western blotting. Our results showed that the photo-immobilized IFN-α latex films effectively inhibited the growth of both Neisseria gonorrhoeae and human cervical cancer HeLa cells. Moreover, the expression of anti-viral proteins, including P56, MxA, and 2', 5'-OAS, in the human cervical epithelial cell line NC104 was significantly increased by photo-immobilized IFN-α latex films. Taken together, these results suggest that photo-immobilized IFN-α latex films may have therapeutic effects against cervicitis, cervical cancers, and cervical virus.

Review of Bionanocomposite Coating Films and Their Applications

The properties of a composite material depend on its constituent materials such as natural biopolymers or synthetic biodegradable polymers and inorganic or organic nanomaterials or nano-scale minerals. The significance of bio-based and synthetic polymers and their drawbacks on coating film application is currently being discussed in research papers and articles. Properties and applications vary for each novel synthetic bio-based material, and a number of such materials have been fabricated in recent years. This review provides an in-depth discussion on the properties and applications of biopolymer-based nanocomposite coating films. Recent works and articles are cited in this paper. These citations are ubiquitous in the development of novel bionanocomposites and their applications.

Comparative in silico-in vivo evaluation of ASGP-R ligands for hepatic targeting of curcumin Gantrez nanoparticles

The present study aims to design hepatic targeted curcumin (CUR) nanoparticles using Gantrez (GZ) as a polymer. Three carbohydrate-based hepatocyte asialoglycoprotein receptor (ASGP-R) ligands were selected for the study, namely kappa carrageenan (KC), arabinogalactan (AG), and pullulan (P). AG and KC are galactose based while P is a glucose-based polymer. CUR-GZ nanoparticles were prepared by nanoprecipitation and anchored with the ligands by nonspecific adsorption onto preformed nanoparticles. The change in zeta potential values confirmed adsorption of the ligands. Docking simulation was evaluated as a tool to predict ligand ASGP-R interactions, using grid-based ligand docking with energies (Glide). Monomers and dimers were used as representative units of polymer for docking analysis. The binding of ASGP-R was validated using D-galactose as monomer. The interaction of the ligands with the receptor was evaluated based on Glide scores and E model values, both for monomers and dimers. The data of the docking study based on Glide scores and E model values suggested higher affinity of AG and P to the ASGP-R, compared to KC. At 1 h, following intravenous administration of the nanoparticles to rats, the in vivo hepatic accumulation in the order CUR-GZAG > CUR-GZKC > CUR-GZP correlated with the docking data based on Glide scores. However, at the end of 6 h, pullulan exhibited maximum hepatic accumulation and arabinogalactan minimum accumulation (p < 0.05). Nevertheless, as predicted by docking analysis, arabinogalactan and pullulan revealed maximum hepatic accumulation. Docking analysis using dimers as representative stereochemical units of polymers provides a good indication of ligand receptor affinity. Docking analysis provides a useful tool for the preliminary screening of ligands for hepatic targeting.

Cell cycle arrest and apoptosis of OVCAR-3 and MCF-7 cells induced by co-immobilized TNF-α plus IFN-γ on polystyrene and the role of p53 activation

The aim of this study is to reveal the biological mechanism for high anti-cancer efficiency of co-immobilized TNF-α plus IFN-γ polymeric drug (co-immobilized drug) in mediating two gynecologic cancer cell lines: MCF-7 and OVCAR-3. The co-immobilized drug is prepared by mixing 10 ng/ml TNF-α plus 10 ng/ml IFN-γ which are then photo-immobilized onto cell culture polystyrene plates. The drug compositions and microstructures are characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The MCF-7 and OVCAR-3 cell cycle arrest and programmed cell death are checked by flow cytometry, and the expression of p53 is probed by immunofluorescence staining. The phosphorylation sites of the p53 regulation and the apoptosis key protein expressions of caspase 3, 8 and 9 are detected by western blot assay. Our data show that, in case of short treatment time (48 h) at low cytokine concentrations (20 ng/ml), the co-immobilized drug demonstrates visible effects in comparison with the treatment using TNF-α plus IFN-γ freely attached on the polymeric plate (free drug). It is revealed that the co-immobilized drug leads to significant cell arrest in the S phase or G(1) and G(2) phase and offer high efficiency in mediating a caspase-dependent apoptosis via p53 transcriptional regulation. Moreover, upon the treatment by the co-immobilized drug, the two gynecologic cancer cell lines show different phosphorylation sites of p53 and then different caspase-dependent apoptosis pathways. The present work sheds deep insights into the p53 regulation mechanism responsible for the high anti-cancer efficiency of the co-immobilized TNF-α plus IFN-γ polymeric drug against MCF-7 and OVCAR-3.

Natural Products: A Minefield of Biomaterials

The development of natural biomaterials is not regarded as a new area of science, but has existed for centuries. The use of natural products as a biomaterial is currently undergoing a renaissance in the biomedical field. The major limitations of natural biomaterials are due to the immunogenic response that can occur following implantation and the lot-to-lot variability in molecular structure associated with animal sourcing. The chemical stability and biocompatibility of natural products in the body greatly accounts for their utilization in recent times. The paper succinctly defines biomaterials in terms of natural products and also that natural products as materials in biomedical fields are considerably versatile and promising. The various types of natural products and forms of biomaterials are highlighted. Three main areas of applications of natural products as materials in medicine are described, namely, wound management products, drug delivery systems, and tissue engineering. This paper presents a brief history of natural products as biomaterials, various types of natural biomaterials, properties, demand and economic importance, and the area of application of natural biomaterials in recent times.

Synthesis and Characterization of Self-Assembled Nanogels Made of Pullulan

Self-assembled nanogels made of hydrophobized pullulan were obtained using a versatile, simple, reproducible and low-cost method. In a first reaction pullulan was modified with hydroxyethyl methacrylate or vinyl methacrylate, further modified in the second step with hydrophobic 1-hexadecanethiol, resulting as an amphiphilic material, which self-assembles in water via the hydrophobic interaction among alkyl chains. Structural features, size, shape, surface charge and stability of the nanogels were studied using hydrogen nuclear magnetic resonance, fluorescence spectroscopy, cryo-field emission scanning electron microscopy and dynamic light scattering. Above the critical aggregation concentration spherical polydisperse macromolecular micelles revealed long-term colloidal stability in aqueous medium, with a nearly neutral negative surface charge and mean hydrodynamic diameter in the range 100–400 nm, depending on the polymer degree of substitution. Good size stability was observed when nanogels were exposed to potential destabilizing pH conditions. While the size stability of the nanogel made of pullulan with vinyl methacrylate and more hydrophobic chains grafted was affected by the ionic strength and urea, nanogel made of pullulan with hydroxyethyl methacrylate and fewer hydrophobic chains grafted remained stable.

Immobilisation of bifenthrin for termite control

BACKGROUND

Termites are worldwide pests causing considerable damage to agriculture, forestry and buildings. While various approaches have been tried to eliminate termite populations, the relevant toxicants are associated with certain risks to the environment and human health.

RESULTS

In this study, to combine the merits of effective chemical control by bifenthrin and a drug photoimmobilisation technique, silk fibroin was used as a carrier to embed bifenthrin, which was then photoactively immobilised by ultraviolet treatment on the surface of wood (cellulose). The immobilised bifenthrin embedded in the photoactive silk fibroin was characterised by Fourier transform infrared spectroscopy (FTIR), ultraviolet absorption spectroscopy (UV), fluorescence measurement and CHN analysis. The surface structures and biological activity were examined by scanning electron microscopy (SEM), atomic force microscopy (AFM), electron spectroscopy for chemical analysis (ESCA) and bioassays respectively.

CONCLUSIONS

The results indicate that the embedded and immobilised bifenthrin has been very well protected from free release and has a long-term stability allowing slow release with a high efficiency against termites at a low dose of 1.25 µg cm(-2). This study provides a novel and environmentally benign technique for termite control by photoimmobilising silk-fibroin-embedded bifenthrin on the surface of materials that are otherwise easily attacked by termites.

Cell-laden microengineered pullulan methacrylate hydrogels promote cell proliferation and 3D cluster formation

The ability to encapsulate cells in three-dimensional (3D) environments is potentially of benefit for tissue engineering and regenerative medicine. In this paper, we introduce pullulan methacrylate (PulMA) as a promising hydrogel platform for creating cell-laden microscale tissues. The hydration and mechanical properties of PulMA were demonstrated to be tunable through modulation of the degree of methacrylation and gel concentration. Cells encapsulated in PulMA exhibited excellent viability. Interestingly, while cells did not elongate in PulMA hydrogels, cells proliferated and organized into clusters, the size of which could be controlled by the hydrogel composition. By mixing with gelatin methacrylate (GelMA), the biological properties of PulMA could be enhanced as demonstrated by cells readily attaching to, proliferating, and elongating within the PulMA/GelMA composite hydrogels. These data suggest that PulMA hydrogels could be useful for creating complex, cell-responsive microtissues, especially for applications that require controlled cell clustering and proliferation.

Surface modification of plastic, glass and titanium by photoimmobilization of polyethylene glycol for antibiofouling

Photoreactive poly(ethylene glycol) (PEG) was prepared and the polymer was photoimmobilized on organic, inorganic and metal surfaces to reduce their interaction with proteins and cells. The photoreactive PEG was synthesized by co-polymerization of methacrylate-PEG and acryloyl 4-azidobenzene. Surface modification was carried in the presence and the absence of a micropatterned photomask. It was then straightforward to confirm the immobilization using the micropatterning. Using the micropatterning method, immobilization of the photoreactive PEG on plastic (Thermanox), glass and titanium was confirmed by time-of-flight secondary ion mass spectroscopy and atomic force microscopy observations. The contact angle on an unpatterned surface was measured. Although the original surfaces have different contact angles, the contact angle on PEG-immobilized surfaces was the same on all surfaces. This result demonstrated that the surface was completely covered with PEG by the photoimmobilization. To assess non-specific protein adsorption on the micropatterned surface, horseradish peroxidase (HRP)-conjugated proteins were adsorbed. Reduced protein adsorption was confirmed by vanishingly small staining of HRP substrates on the immobilized regions. COS-7 cells were cultured on the micropatterned surface. The cells did not adhere to the PEG-coated regions. In conclusion, photoreactive PEG was immobilized on various surfaces and tended to reduce interactions with proteins and cells.

Culture of mouse embryonic stem cells on photoimmobilized polymers

Mouse embryonic stem (ES) cells were cultured on four types of polymer with different surface properties. The polymers were poly(acrylic acid), polyallylamine, gelatin, and poly(2-methacryloyloxyethyl phosphorylcholine-co-methacrylic acid) (PMAc50), and were coupled with azidophenyl groups and photoimmobilized on conventional polystyrene cell-culture dishes. Mouse ES cells were cultured on the immobilized polymer surfaces, and cell morphology, cell growth, staining for alkaline phosphatase, activation of the transcription factor stat3, and expression of the octamer-binding protein 3/4 (Oct3/4) transcription factor and the zinc finger-containing transcription factor (GATA4) were observed. Morphology and growth rate were significantly affected by the polymer surface properties. The ES cells attached to gelatin or polyallylamine surfaces; however, colonies formed on the former but not the latter. In addition, significant enhancement of growth was observed on the gelatin surface. In contrast, ES cells aggregated to form an embryoid body on the photoimmobilized poly(acrylic acid) surface and the PMAc50 surface, although cell growth was reduced. Significant enhancement of aggregation of ES cells on the PMAc50 surface was observed in morphology and gene expression analyses.

A composite of hydroxyapatite with electrospun biodegradable nanofibers as a tissue engineering material

Biodegradable and biocompatible poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a copolymer of microbial polyester, was fabricated as a nanofibrous film by electrospinning and composited with hydroxyapatite (HAp) by soaking in simulated body fluid. Compared with a PHBV cast (flat) film, the electrospun PHBV nanofibrous film was hydrophobic. However, after HAp deposition, both of the surfaces were extremely hydrophilic. The degradation rate of HAp/PHBV nanofibrous films in the presence of polyhydroxybutyrate depolymerase was very fast. Nanofiber formation increased the specific surface area and HAp enhanced the invasion of enzyme into the film by increasing surface hydrophilicity. The surface of the nanofibrous film showed enhanced cell adhesion over that of the flat film, although cell adhesion was not significantly affected by the combination with HAp.