Repair of canine mandibular bone defects with bone marrow stromal cells and porous beta-tricalcium phosphate

Calcium sulfate-based load-bearing bone grafts with patient-specific geometry

The treatment of bone defects with complex three-dimensional geometry presents challenges in terms of bone grafting and restoration. In this paper, we propose a rapid and effective method that uses 3D printing, ceramic casting, and the incorporation of mesh reinforcement to create load-bearing bone grafts with patient-specific three-dimensional geometry. Using two types of facial bones as examples, we show that this fabrication method has a high degree of geometrical fidelity. We also experimentally study the fracture behavior of six different architectures designed for the treatment of mandibular defects, one of the principal load-bearing facial bones. These design configurations include un-reinforced calcium sulfate samples, and samples reinforced with one or two layers of stainless steel, poly (lactic acid), and poly (L-lactic acid). The results suggested a trade-off between energy dissipation and maximum load based on the position of the metal mesh in the sample. Samples reinforced with one layer of metallic mesh at their lowermost margin exhibited a 17% higher stiffness and a 21.3% higher peak load, while samples with a layer of metal mesh embedded within dissipated 16% more energy. Samples with two layers of metallic mesh demonstrated the highest improvements among all samples, dissipating 5767.85% more energy and exhibiting a peak load 145.6% higher compared to plain CS. The improvements in stiffness for SD, SL, and S2 were 3%, 21.3%, and 21.9% respectively compared to the plain ceramic. In contrast, PLA mesh improved energy dissipation by 96.71% but reduced the peak load by 29.18%, while PLLA mesh decreased both the peak load and the dissipated energy by 13.05% and 35.31%, respectively. While PLA mesh reduced stiffness by 11% compared to plain CS, PLLA mesh-reinforced samples were slightly stiffer than pure CS by 1.6%.

Effects of Simvastatin-Loaded Nanomicelles on the Early Preservation of Tooth Extraction Sites

Object

The present study intended to evaluate the effect of simvastatin-loaded nanomicelles (SVNs) on promoting new bone formation and reducing alveolar ridge resorption at the tooth extraction sites at the early healing of the extraction sockets.

Methods

SVNs were synthesized using a dialysis method. The rabbit tooth extraction model was established, SVNs and simvastatin (SV) were loaded on gelatin sponge and inserted into the extraction socket. CBCT scans were performed at 0, 2, and 4 weeks postoperatively to evaluate bone formation and alveolar ridge absorption in the extraction sockets. And all the animals were sacrificed and the mandibles were harvested. And HE staining and Masson staining were used for histological evaluation of the bone formation in the extraction sockets.

Results

Radiographic evaluation showed that compared with the blank control group, at 2 and 4 weeks after extraction, SVNs increased the new bone density in the extraction sockets by 75.7% and 96.5%, and reduced the absorption rate of alveolar ridge length at the extraction sites by 60.8% and 49.1%, respectively. Histological evaluation showed that SVNs significantly improved the maturation of new bone tissue in the extraction sockets.

Conclusion

SVNs can significantly accelerate healing and effectively reduce the absorption of alveolar ridge at the extraction sites in the early stage of tooth extraction socket healing.

Reconstruction of Segmental Bone Defect in Canine Tibia Model Utilizing Bi-Phasic Scaffold: Pilot Study

The reunion and restoration of large segmental bone defects pose significant clinical challenges. Conventional strategies primarily involve the combination of bone scaffolds with seeded cells and/or growth factors to regulate osteogenesis and angiogenesis. However, these therapies face inherent issues related to immunogenicity, tumorigenesis, bioactivity, and off-the-shelf transplantation. The biogenic micro-environment created by implanted bone grafts plays a crucial role in initiating the bone regeneration cascade. To address this, a highly porous bi-phasic ceramic synthetic bone graft, composed of hydroxyapatite (HA) and alumina (Al), was developed. This graft was employed to repair critical segmental defects, involving the creation of a 2 cm segmental defect in a canine tibia. The assessment of bone regeneration within the synthetic bone graft post-healing was conducted using scintigraphy, micro-CT, histology, and dynamic histomorphometry. The technique yielded pore sizes in the range of 230-430 μm as primary pores, 40-70 μm as secondary inner microchannels, and 200-400 nm as tertiary submicron surface holes. These three components are designed to mimic trabecular bone networks and to provide body fluid adsorption, diffusion, a nutritional supply, communication around the cells, and cell anchorage. The overall porosity was measured at 82.61 ± 1.28%. Both micro-CT imaging and histological analysis provided substantial evidence of robust bone formation and the successful reunion of the critical defect. Furthermore, an histology revealed the presence of vascularization within the newly formed bone area, clearly demonstrating trabecular and cortical bone formation at the 8-week mark post-implantation.

NOVEL HIGH-STRENGTH POLYESTER COMPOSITE SCAFFOLDS FOR BONE REGENERATION

Repair of critical sized bone defects, particularly in load-bearing areas, is a major clinical problem that requires surgical intervention and implantation of biological or engineered grafts. For load-bearing sites, it is essential to use engineered grafts that have both sufficient mechanical strength and appropriate pore properties to support bone repair and tissue regeneration. Unfortunately, the mechanical properties of such grafts are often compromised due to the creation of pores required to facilitate tissue ingrowth following implantation. To overcome the limitations associated with porous scaffolds and their reduced mechanical strength, we have developed a methodology for creating a solid structure that retains its bulk mechanical properties while also evolving into a porous structure in a biological environment through degradation and erosion. In this study, we utilized polyesters that have been approved by the FDA, including poly (lactic acid) (PLA), poly(glycolic acid) (PGA), their copolymer PLGA (PLGA, with a ratio of 85:15 and 50:50 of PLA:PGA), and poly(caprolactone) (PCL). These polymers and their ceramic composites with tricalcium phosphate (TCP) were compression molded into solid forms, which exhibited mechanical properties with compressive modulus as high as 2745 ± 364 MPa within the range of human trabecular bone and in the lower range of human cortical bone. The use of fast-degrading PLGA (50:50) and PGA as porogens allowed the formation of pores within the solid structures due to their degradation, and the TCP acts as a buffering agent to neutralize their acidic degradation byproducts. These scaffolds facilitated the growth of new blood vessels and tissue ingrowth in a subcutaneous implantation model. In addition, in a rat critical-sized mandibular bone defects these scaffolds supported bone growth with 70% of new bone volume fraction. Furthermore, the extent of bone regeneration was found to be higher for the scaffolds with bone morphogenic proteins (BMP2), indicating their suitability for bone repair and regeneration.

3D printed pore morphology mediates bone marrow stem cell behaviors via RhoA/ROCK2 signaling pathway for accelerating bone regeneration

Bone bionics and structural engineering have sparked a broad interest in optimizing artificial scaffolds for better bone regeneration. However, the mechanism behind scaffold pore morphology-regulated bone regeneration remains unclear, making the structure design of scaffolds for bone repair challenging. To address this issue, we have carefully assessed diverse cell behaviors of bone mesenchymal stem cells (BMSCs) on the β-tricalcium phosphate (β-TCP) scaffolds with three representative pore morphologies (i.e., cross column, diamond, and gyroid pore unit, respectively). Among the scaffolds, BMSCs on the β-TCP scaffold with diamond pore unit (designated as D-scaffold) demonstrated enhanced cytoskeletal forces, elongated nucleus, faster cell mobility, and better osteogenic differentiation potential (for example, the alkaline phosphatase expression level in D-scaffold were 1.5-2 times higher than other groups). RNA-sequencing analysis and signaling pathway intervention revealed that Ras homolog gene family A (RhoA)/Rho-associated kinase-2 (ROCK2) has in-depth participated in the pore morphology-mediated BMSCs behaviors, indicating an important role of mechanical signaling transduction in scaffold-cell interactions. Finally, femoral condyle defect repair results showed that D-scaffold could effectively promote endogenous bone regeneration, of which the osteogenesis rate was 1.2-1.8 times higher than the other groups. Overall, this work provides insights into pore morphology-mediated bone regeneration mechanisms for developing novel bioadaptive scaffold designs.

Preclinical Evaluation of Bioactive Scaffolds for the Treatment of Mandibular Critical-Sized Bone Defects: A Systematic Review

This systematic review evaluated current in vivo research on regenerating critical-sized mandibular defects and discussed methodologies for mandibular bone tissue engineering. Out of the 3650 articles initially retrieved, 88 studies were included, and all studies that used a scaffold reported increased bone formation compared to negative controls. Combining scaffolds with growth factors and mesenchymal stem cells improved bone formation and healing. Bone morphogenic proteins were widely used and promoted significant bone formation compared to controls. However, discrepancies between studies exist due to the various methodologies and outcome measures used. The use of scaffolds with bioactive molecules and/or progenitor cells enhances success in mandibular bone engineering. Scaffold-based mandibular bone tissue engineering could be introduced into clinical practice due to its proven safety, convenience, and cost-effectiveness.

Nano tantalum-coated 3D printed porous polylactic acid/beta-tricalcium phosphate scaffolds with enhanced biological properties for guided bone regeneration

Bone defects caused by tumors section, traffic accidents, and surgery remain a challenge in clinical. The drawbacks of traditional autografts and allografts limit their clinical application. 3D printed porous scaffolds have monumental potential to repair bone defects but still cannot effectively promote bone formation. Nano tantalum (Ta) has been reported with effective osteogenesis capability. Herein, we fabricated 3D printed PLA/β-TCP scaffold by using the fused deposition modeling (FDM) technique. Ta was doped on the surface of scaffolds utilizing the surface adhesion ability of polydopamine to improve its properties. The constructed PLA/β-TCP/PDA/Ta had good physical properties. In vitro studies demonstrated that the PLA/β-TCP/PDA/Ta scaffolds considerably promote cell proliferation and migration, and it additionally has osteogenic properties. Therefore, Ta doped 3D printed PLA/β-TCP/PDA/Ta scaffold could incontestably improve surface bioactivity and lead to better osteogenesis, which may provide a unique strategy to develop bioactive bespoke implants in orthopedic applications.

A review on bioceramics scaffolds for bone defect in different types of animal models: HA and β -TCP

Increased life expectancy has led to an increase in the use of bone substitutes in numerous nations, with over two million bone-grafting surgeries performed worldwide each year. A bone defect can be caused by trauma, infections, and tissue resections which can self-heal due to the osteoconductive nature of the native extracellular matrix components. However, natural self-healing is time-consuming, and new bone regeneration is slow, especially for large bone defects. It also remains a clinical challenge for surgeons to have a suitable bone substitute. To date, there are numerous potential treatments for bone grafting, including gold-standard autografts, allograft implantation, xenografts, or bone graft substitutes. Tricalcium phosphate (TCP) and hydroxyapatite (HA) are the most extensively used and studied bone substitutes due to their similar chemical composition to bone. The scaffolds should be testedin vivoandin vitrousing suitable animal models to ensure that the biomaterials work effectively as implants. Hence, this article aims to familiarize readers with the most frequently used animal models for biomaterials testing and highlight the available literature for in vivo studies using small and large animal models. This review summarizes the bio ceramic materials, particularly HA and β-TCP scaffolds, for bone defects in small and large animal models. Besides, the design considerations for the pre-clinical animal model selection for bone defect implants are emphasized and presented.

How to maintain and transport equine adipose tissue for isolating mesenchymal stem cells?

BACKGROUND

Adipose tissue (AT) is one of the most important mesenchymal stem cell (MSC) sources because of its high quantities, availability and ease of collection. After being collected samples, they should be transported to a laboratory for stem cell (SC) isolation, culture and expansion for future clinical application. Usually, laboratories are distant from animal husbandry centers; therefore, it is necessary to provide suitable conditions for adipose tissue transportation, such that adipose-derived MSCs are minimally affected. In the current study, the impact of tissue maintenance under different conditions on MSCs derived from these tissues was evaluated. We aimed at finding suitable and practical transportation methods in which ASCs go through the slightest changes.

RESULTS

In the current study, after being collected, equine AT was randomized into eight groups: four samples were maintained in stem cell culture media at 25 ^οC and 4 ^οC for 6 and 12 hrs. as transportation via SC media groups. Three samples were frozen at three different temperatures (- 20, - 75 and - 196 ^οC) as cryopreserved groups; these samples were defrosted 1 week after cryopreservation. Fresh and unfrozen AT was evaluated as a control group. The tissue samples were then initiated into enzymatic digestion, isolation and the culturing of SCs. Cells at passage three were used to evaluate the ability to form colonies, proliferation rate, plotting of the cell growth curve, and viability rate. All experiments were performed in triplicate. Stem cell isolation was successful in all groups, although purification of SCs from the first series of cryopreservation at - 196 ^οC and two series of - 20 ^οC was unsuccessful. There was no significant difference between the surface area of colonies in all groups except for - 20 ^οC. The growth rate of transportation via stem cell media at 25 ^οC for 6 hrs. was similar to that of the control group. MTT analysis revealed a significant difference between 25 ^οC 12 hrs. Group and other experimental groups except for control, 4 ^οC 12 hrs. and - 196 ^οC group.

CONCLUSION

Data have shown freezing at - 75 ^οC, transportation via stem cell media at 4 ^οC for 12 hrs. and 25 ^οC for 6 hrs. are acceptable tissue preservation and transportation methods due to minor effects on MSCs features.

Bone Using Stem Cells for Maxillofacial Bone Disorders: A Systematic Review and Meta-analysis

Due to economic, cultural, environmental, and social factors, the prevalence of maxillofacial bone disorders varies in different parts of the world. The present meta-analysis was conducted to assess the efficacy and safety of different type of stem cells-based scaffolds and their construction methods in maxillofacial bone disorders. We searched major indexing databases, including PubMed/Medline, ISI Web of Science, Scopus, Embase, and Cochrane Central without any language, study region, or type restrictions. A systematic search of articles published up to July 2021 was done. Of the 428 studies found through initial searches, 36 met the inclusion criteria. After applying the exclusion criteria, the main properties of 32 articles on 643 animals and 4 experimental studies on 52 patients (age range from 43 to 74 years) included in this meta-analysis. Our pooled analysis showed that stem cells-based scaffolds significantly improved the bone regeneration and formation in maxillofacial bone disorders (Prevalence: 0.54; 95% CI: 0.43, 0.64, P < 00001, I2 = 90 2). According to the results of these studies, in most studies, bone marrow-derived mesenchymal stem cells (BMSCs) have been used to regenerate bone, and these cells are still the gold standard in bone tissue engineering, a growth factor that is one of the three sides of the tissue engineering triangle. Bone morphogenetic proteins (BMP) especially BMP2 and platelet-rich plasma (PRP) are the most widely used growth factor and scaffold respectively. Platelet-rich plasma (PRP) is used as a scaffold and since it contains proteins, it also used as a growth factor and can be a stimulant of ossification. It seems that the future perspective of bone tissue engineering is to use the prototyping rapid method to build a composite and patient-specific scaffold from CT and MRI images, along with genetically modified stem cells.

The Use of Customized Three-Dimensionally Printed Mandible Prostheses with a Pressure-Reducing Device: A Finite Element Analysis in Different Chewing Positions, Biomechanical Testing, and In Vivo Animal Study Using Lanyu Pigs

Segmental bony defects of the mandible constitute a complete loss of the regional part of the mandible. Although several types of customized three-dimension-printed mandible prostheses (CMPs) have been developed, this technique has yet to be widely used. We used CMP with a pressure-reducing device (PRD) to investigate its clinical applicability. First, we used the finite element analysis (FEA). We designed four models of CMP (P1 to P4), and the result showed that CMP with posterior PRD deployment (P4 group) had the maximum total deformation in the protrusion and right excursion positions, and in clenching and left excursion positions, posterior screws had the minimum von Mises stress. Second, the P4 CMP-PRD was produced using LaserCUSING from titanium alloy (Ti-6Al-4V). The fracture test result revealed that the maximum static pressure that could be withstood was 189 N, and a fatigue test was conducted for 5,000,000 cycles. Third, animal study was conducted on five male 4-month-old Lanyu pigs. Four animals completed the experiment. Two animals had CMP exposure in the oral cavity, but there was no significant inflammation, and one animal had a rear wing fracture. According to a CT scan, the lingual cortex of the mandible crawled along the CMP surface, and a bony front-to-back connection was noted in one animal. A histological examination indicated that CMP was significantly less reactive than control materials (p = 0.0170). Adequate PRD deployment in CMP may solve a challenge associated with CMP, thus promoting its use in clinical practice.

Osteostatin improves the Osteogenic differentiation of mesenchymal stem cells and enhances angiogenesis through HIF-1α under hypoxia conditions in vitro

BACKGROUND

Hypoxia conditions induced by bone defects would prolong the duration of bone regeneration. The effect of osteostatin (OST) on the osteogenic differentiation of mesenchymal stem cells (MSCs) and angiogenesis under hypoxia conditions remain unexplored.

METHODS

SPF mice were obtained, and MSCs were isolated from bone marrow. MSCs were treated with 1% oxygen for hypoxia induction, and 200 nM of OST was used to treat cells under nomorxia or hypoxia conditions. Cell proliferation was evaluated using CCK8 assay, and trypan blue staining was implemented for determining cell death ratio. Alkaline phosphatase activity and alizarin redS staining was conducted to histologically evaluated osteogenic differentiation. Flow cytometry was used for the detection of CD31^hiEmcn^hi cells (Type H ECs), whose migration was detected by Transwell assay and angiogenesis was measured by tube formation assay. Protein level was measured by western blotting and mRNA level was monitored via RT-qPCR.

RESULTS

The MSC proliferation was enhanced by OST under hypoxia conditions. The osteogenic differentiation of MSCs was decreased under hypoxia conditions, and treatment of OST significantly reversed its inhibitory effect. The hypoxia treated culture medium of MSCs promoted the proliferation, migration, and angiogenesis of type H ECs, while the effects were further strengthened by OST addition. HIF-1α was found to be upregulated in hypoxia treated MSCs, whereas silencing of HIF-1α had reversed effects on the angiogenic capacity of Type H ECs.

CONCLUSION

OST improved the proliferation and osteogenic differentiation of MSCs and further promoted angiogenesis of type H ECs through upregulating HIF-1α expression.

Transforming the Degradation Rate of β-tricalcium Phosphate Bone Replacement Using 3-Dimensional Printing

BACKGROUND

β-Tricalcium phosphate (β-TCP) is one of the most common synthetic bone grafting materials utilized in craniofacial reconstruction; however, it is limited by a slow degradation rate. The aim of this study was to leverage 3-dimensional (3D) printing in an effort to accelerate the degradation kinetics of β-TCP.

METHODS

Twenty-two 1-month-old New Zealand white rabbits underwent creation of calvarial and alveolar defects, repaired with 3D-printed β-TCP scaffolds coated with 1000 μM of osteogenic agent dipyridamole. Rabbits were euthanized after 2, 6, and 18 months after surgical intervention. Bone regeneration, scaffold degradation, and bone mechanical properties were quantified.

RESULTS

Histological analysis confirmed the generation of vascularized and organized bone. Microcomputed tomography analysis from 2 to 18 months demonstrated decreased scaffold volume within calvarial (23.6% ± 2.5%, 5.1% ± 2.2%; P < 0.001) and alveolar (21.5% ± 2.2%, 0.2% ± 1.9%; P < 0.001) defects, with degradation rates of 54.6%/year and 90.5%/year, respectively. Scaffold-inducted bone generation within the defect was volumetrically similar to native bone in the calvarium (55.7% ± 6.9% vs 46.7% ± 6.8%; P = 0.064) and alveolus (31.4% ± 7.1% vs 33.8% ± 3.7%; P = 0.337). Mechanical properties between regenerated and native bone were similar.

CONCLUSIONS

Our study demonstrates an improved degradation profile and replacement of absorbed β-TCP with vascularized, organized bone through 3D printing and addition of an osteogenic agent. This novel additive manufacturing and tissue engineering protocol has implications to the future of craniofacial skeletal reconstruction as a safe and efficacious bone tissue engineering method.

Advances in Tissue Engineering and Implications for Oral and Maxillofacial Reconstruction

BACKGROUND

Reconstructive surgery in the oral and maxillofacial region poses many challenges due to the complexity of the facial skeleton and the presence of composite defects involving soft tissue, bone and nerve defects.

METHODS

Current methods of reconstruction include autologous grafting techniques with local or regional rotational flaps or microvascular free flaps, allografts, xenografts and prosthetic devices.

RESULTS

Tissue engineering therapies utilizing stem cells provide promise for enhancing the current reconstructive options.

CONCLUSIONS

This article is a review on tissue engineering strategies applicable to specialists who treat oral and maxillofacial defects.

PRACTICAL IMPLICATIONS

We review advancements in hard tissue regeneration for dental rehabilitation, soft tissue engineering, nerve regeneration and innovative strategies for reconstruction of major defects.

Comparative characteristic study from bone marrow-derived mesenchymal stem cells

Tissue engineering has been extensively investigated and proffered to be a potential platform for novel tissue regeneration. The utilization of mesenchymal stem cells (MSCs) from various sources has been widely explored and compared. In this regard, MSCs derived from bone marrow have been proposed and described as a promising cell resource due to their high yield of isolated cells with colony-forming potential, self-renewal capacity, MSC surface marker expression, and multi-lineage differentiation capacities in vitro. However, there is evidence for bone marrow MSCs (BM-MSCs) both in vitro and in vivo from different species presenting identical and distinct potential stemness characteristics. In this review, the fundamental knowledge of the growth kinetics and stemness properties of BM-MSCs in different animal species and humans are compared and summarized. Finally, to provide a full perspective, this review will procure results of current information studies focusing on the use of BM-MSCs in clinical practice.

Comparative analysis of plasma-derived albumin scaffold, alveolar osteoblasts and synthetic membrane in critical mandibular bone defects: An experimental study on rats

Repair of bone deficiencies in the craniofacial skeleton remains a challenging clinical problem. The aim of this study was to evaluate and compare the effects of a plasma-derived albumin scaffold, alveolar osteoblasts and synthetic membrane implanted into experimental mandibular defects. Bilateral mandibular defects were created in twelve immunodeficient rats. The bone defect was filled with serum scaffold alone in left sides and scaffold combined with human alveolar osteoblast in right side defects. Implanted areas were closed directly in Group 1 (n = 6) and covered by a resorbable polyglycolic-polylactic acid membrane in Group 2 (n = 6). Bone regeneration was determined at 12 weeks as measured by and exhaustive multiplanar computed tomography analysis and histological examination. No significant differences in bone density were observed between defects transplanted with scaffold alone or scaffold seeded with osteoblasts. The use of membrane did not result in a determining factor in the grade of bone regeneration between Groups 1 and 2. Based on these results, it could be concluded that the albumin scaffold alone has osteoinductive capacity but presence of seeded ostogenic cells accelerates defect repair without being significantly influenced by covering the defect with a resorbable membrane.

Adipose-derived stem cell sheets combined with β-tricalcium phosphate/collagen-I fiber scaffold improve cell osteogenesis

Transplantation of cell-based material is a promising approach for the treatment of critical bone defects. However, it is still limited by the lack of suitable scaffold material or abundant seeding cell sources. The present study aimed to establish a novel composite of an adipose-derived stem cell (ADSC) sheet and a synthetic porous β-tricalcium phosphate/collagen-I fiber (β-TCP/COL-I) scaffold to enhance osteogenic activity. ADSCs were isolated from 3-week-old female Sprague Dawley rats and the ADSC sheets were prepared in an osteoinductive medium. The study groups included the ADSC sheets/scaffold, scattered ADSCs/scaffold, ADSC sheet alone and scaffold alone. Scanning electron microscopy and energy-dispersive spectrometry were used to observe cell-scaffold interactions and analyze the relative calcium content on the composites' surface. Alizarin red S staining was used to examine the calcium deposition. ELISA and reverse transcription-quantitative PCR were used to detect the expression levels of alkaline phosphatase (ALP), osteocalcin (OCN) and osteopontin (OPN). The results revealed that ADSCs were able to tightly adhere to the β-TCP/COL-I scaffold with no cytotoxicity. The calcifying nodules reaction was positive on ADSC sheets and gradually increased after osteogenic induction. In addition, the β-TCP/COL-I scaffold combined with ADSC sheets was able to significantly enhance the expression levels of ALP, OCN and OPN and increase the superficial relative calcium content compared to scattered ADSCs/scaffold or the ADSC sheet alone (P<0.05). The results indicated that ADSCs possess a strong osteogenic potential, particularly in the cell-sheet form and when compounded with the β-TCP/COL-I scaffold, compared to scattered ADSCs with a β-TCP/COL-I scaffold or an ADSC sheet alone. This novel composite may be a promising candidate for bone engineering.

Evaluation of bone regeneration in mandible large defect using undifferentiated adipose stem cells loaded on gelatin carrier: An animal model case study

Background. Large mandibular defects are considered difficult reconstructive challenges for oral and maxillofacial surgeons. Cell therapy, as an alternative technique, might increase the speed of bone regeneration. This study aimed to investigate bone regeneration in large defects of dog mandibles using allogenic adipose-derived stem cells on gelatin foam as a cell carrier. Methods. The tissue engineering phase consisted of the sampling of adult dogs' adipose tissue that can easily be isolated from adipose stem cells (ASCs) of the dogs, ASCs were cultured in Dulbecco's Modified Eagle's Medium (DMEM, Gibco, USA) with low glucose, containing 10% fetal bovine serum (FBS) (Sigma, USA) and 1% penicillin-streptomycin (Gibco, USA), with the characterization of dog ASCs and gelatin-transplanted ASCs. Six dogs were included in this experimental study in the next step and randomly assigned to the treatment and control groups. The samples in both groups underwent surgery under general anesthesia to create uniform 3-cm bony defects. The samples in both groups were reconstructed with titanium reconstruction plates and screws. A large bone gap filled with ASCs (5×10⁶ ) was seeded on gelatin (ASCs) in the treatment group. In the control group, bony defects were filled with a cell delivery carrier without ASCs. Six months after transplantation, the animals' mandibles were evaluated by CT scan imaging, and the results were quantified through the Hounsfield unit (HU). The data were analyzed with t-test. Results. Before transplantation, the nature of the stem cells was confirmed by the expression of CD44 and CD105 cell markers at 71.9% and 89.3%, respectively, and a lack of the CD45 cell marker expression at 2.2%. Evaluation of CT scan images showed significantly higher bone repair in the ASCs group (920.25±572.92 HU) than in the control group (-94.746± 08.42). Conclusion. The bone regeneration of the ASCs group was significantly higher than that in the control group.

High Mineralization Capacity of IDG-SW3 Cells in 3D Collagen Hydrogel for Bone Healing in Estrogen-Deficient Mice

Tissue engineering with 3D scaffold is a simple and effective method for bone healing after large-scale bone loss. So far, bone marrow-derived mesenchymal stem cells (BMSCs) are mostly used in the treatment of bone healing in animal models due to their self-renewal capability and osteogenic potential. Due to the fact that the main functional cells in promoting osteoid mineralization and bone remodeling were osteocytes, we chose an osteoblast-to-osteocyte transition cell line, IDG-SW3, which are not proliferative under physiological conditions, and compared the healing capability of these cells to that of BMSCs in bone defect. In vitro, IDG-SW3 cells revealed a stronger mineralization capacity when grown in 3D collagen gel, compared to that of BMSCs. Although both BMSC and IDG-SW3 can generate stable calcium-phosphate crystal similar to hydroxyapatite (HA), the content was much more enriched in IDG-SW3-mixed collagen gel. Moreover, the osteoclasts co-cultured with IDG-SW3-mixed collagen gel were easier to be activated, indicating that the IDG-SW3 grafting could promote the bone remodeling more efficiently in vivo. Last, in order to reduce the self-healing capability, we assessed the healing capability between the IDG-SW3 cells and BMSCs in osteoporotic mice. We found that the collagen hydrogel mixed with IDG-SW3 cells has a better healing pattern than what was seen in hydrogel mixed with BMSCs. Therefore, these results demonstrated that by promoting osteoblast-to-osteocyte transition, the therapeutic effect of BMSCs in bone defect repair could be improved.

Recent Developments in Magnesium Metal-Matrix Composites for Biomedical Applications: A Review

Recently, there is a growing interest in developing magnesium (Mg) based degradable biomaterial. Although corrosion is a concern for Mg, other physical properties, such as low density and Young's modulus, combined with good biocompatibility, lead to significant research and development in this area. To address the issues of corrosion and low yield strength of pure Mg, several approaches have been adopted, such as, composite preparation with suitable bioactive reinforcements, alloying, or surface modifications. This review specifically focuses on recent developments in Mg-based metal matrix composites (MMCs) for biomedical applications. Much effort has gone into finding suitable bioactive, bioresorbable reinforcements and processing techniques that can improve upon existing materials. In summary, this review provides a comprehensive overview of existing Mg-based composite preparation and their mechanical and corrosion properties and biological responses and future perspectives on the development of Mg-based composite biomaterials.

Systematic scoping review of mandibular bone tissue engineering

Tissue engineering is a promising alternative that may facilitate bony regeneration in small defects in compromised host tissue as well as large mandibular defects. This scoping systematic review was therefore designed to assess in vivo research on its use in the reconstruction of mandibular defects in animal models. A total of 4524 articles were initially retrieved using the search algorithm. After screening of the titles and abstracts, 269 full texts were retrieved, and a total of 72 studies included. Just two of the included studies employed osteonecrosis as the model of mandibular injury. All the rest involved the creation of a critical defect. Calcium phosphates, especially tricalcium phosphate and hydroxyapatite, were the scaffolds most widely used. All the studies that used a scaffold reported increased formation of bone when compared with negative controls. When combined with scaffolds, mesenchymal stem cells (MSC) increased the formation of new bone and improved healing. Various growth factors have been studied for their potential use in the regeneration of the maxillofacial complex. Bone morphogenic proteins (BMP) were the most popular, and all subtypes promoted significant formation of bone compared with controls. Whilst the studies published to date suggest a promising future, our review has shown that several shortfalls must be addressed before the findings can be translated into clinical practice. A greater understanding of the underlying cellular and molecular mechanisms is required to identify the optimal combination of components that are needed for predictable and feasible reconstruction or regeneration of mandibular bone. In particular, a greater understanding of the biological aspects of the regenerative triad is needed before we can to work towards widespread translation into clinical practice.

Platelet-rich plasma enhances the repair capacity of muscle-derived mesenchymal stem cells to large humeral bone defect in rabbits

Mesenchymal stem cell-based therapy is a highly attractive strategy that promotes bone tissue regeneration. The aim of the present study was to evaluate the combination effect of muscle-derived mesenchymal stem cells (M-MSCs) and platelet-rich plasma (PRP) on bone repair capacity in rabbits with large humeral bone defect. Precise cylindrical bone defects of 10 mm diameter and 5 mm depth were established in rabbit humeral bones, which were unable to be repaired under natural conditions. The rabbits received treatment with M-MSCs/PRP gel, M-MSCs gel, or PRP gel, or no treatment. The bone tissue regeneration was evaluated at day 0-90 after surgery by HE morphological staining, Lane-Sandhu histopathological scoring, tetracycline detection, Gomori staining and micro-computed tomography. Beyond that, Transwell assay, CCK8 assay, Western blot analysis and ALP activity detection were performed in M-MSCs in vitro with or without PRP application to detect the molecular effects of PRP on M-MSCs. We found that the repair effect of M-MSCs group or PRP group was limited and the bone defects were not completely closed at post-operation 90 d. In contrast, M-MSCs/PRP group received obvious filling in the bone defects with a Lane-Sandhu evaluation score of 9. Tetracycline-labeled new bone area in M-MSCs/PRP group and new mineralized bone area were significantly larger than that in other groups. Micro-computed tomography result of M-MSCs/PRP group displayed complete recovery of humeral bone at post-operation 90 d. Further in vitro experiment revealed that PRP significantly induced migration, enhanced the growth, and promoted the expression of Cbfa-1 and Coll I in M-MSCs. In conclusion, PRP application significantly enhanced the regeneration capacity of M-MSCs in large bone defect via promoting the migration and proliferation of M-MSCs, and also inducing the osteogenic differentiation.

Efficacy of three-dimensionally printed polycaprolactone/beta tricalcium phosphate scaffold on mandibular reconstruction

It has been demonstrated that development of three-dimensional printing technology has supported the researchers and surgeons to apply the bone tissue engineering to the oromandibular reconstruction. In this study, poly caprolactone/beta tricalcium phosphate (PCL/β-TCP) scaffolds were fabricated by multi-head deposition system. The feasibility of the three-dimensionally (3D) -printed PCL/β-TCP scaffolds for mandibular reconstruction was examined on critical-sized defect of canine mandible. The scaffold contained the heterogeneous pore sizes for more effective bone ingrowth and additional wing structures for more stable fixation. They were implanted into the mandibular critical-sized defect of which periosteum was bicortically resected. With eight 1-year-old male beagle dogs, experimental groups were divided into 4 groups (n = 4 defects per group, respectively). (a) no further treatment (control), (b) PCL/β-TCP scaffold alone (PCL/TCP), (c) PCL/β-TCP scaffold with recombinant human bone morphogenetic protein-2 (rhBMP-2) (PCL/TCP/BMP2) and (d) PCL/β-TCP scaffold with autogenous bone particles (PCL/TCP/ABP). In micro-computed tomography, PCL/TCP/BMP2 and PCL/TCP/ ABP groups showed significant higher bone volume in comparison to Control and PCL/TCP groups (P < 0.05). In histomorphometric analysis, a trend towards more bone formation was observed in PCL/TCP/BMP2 and PCL/TCP/ABP groups, but the results lacked statistical significance (P = 0.052). Within the limitations of the present study, 3D-printed PCL/β-TCP scaffolds showed acceptable potential for oromandibular reconstruction.

Regulation and Directing Stem Cell Fate by Tissue Engineering Functional Microenvironments: Scaffold Physical and Chemical Cues

It is well known that stem cells reside within tissue engineering functional microenvironments that physically localize them and direct their stem cell fate. Recent efforts in the development of more complex and engineered scaffold technologies, together with new understanding of stem cell behavior in vitro, have provided a new impetus to study regulation and directing stem cell fate. A variety of tissue engineering technologies have been developed to regulate the fate of stem cells. Traditional methods to change the fate of stem cells are adding growth factors or some signaling pathways. In recent years, many studies have revealed that the geometrical microenvironment played an essential role in regulating the fate of stem cells, and the physical factors of scaffolds including mechanical properties, pore sizes, porosity, surface stiffness, three-dimensional structures, and mechanical stimulation may affect the fate of stem cells. Chemical factors such as cell-adhesive ligands and exogenous growth factors would also regulate the fate of stem cells. Understanding how these physical and chemical cues affect the fate of stem cells is essential for building more complex and controlled scaffolds for directing stem cell fate.

Mesenchymal stem cells and biologic factors leading to bone formation

BACKGROUND

Physiological bone formation and bone regeneration occurring during bone repair can be considered distinct but similar processes. Mesenchymal stem cells (MSC) and associated biologic factors are crucial to both bone formation and bone regeneration.

AIM

To perform a narrative review of the current literature regarding the role of MSC and biologic factors in bone formation with the aim of discussing the clinical relevance of in vitro and in vivo animal studies.

METHODS

The literature was searched for studies on MSC and biologic factors associated with the formation of bone in the mandible and maxilla. The search specifically targeted studies on key aspects of how stem cells and biologic factors are important in bone formation and how this might be relevant to bone regeneration. The results are summarized in a narrative review format.

RESULTS

Different types of MSC and many biologic factors are associated with bone formation in the maxilla and mandible.

CONCLUSION

Bone formation and regeneration involve very complex and highly regulated cellular and molecular processes. By studying these processes, new clinical opportunities will arise for therapeutic bone regenerative treatments.

Mesenchymal stem cell-based bone tissue engineering for veterinary practice

Bone tissue engineering has been widely studied and proposed as a promising platform for correcting the bone defects. The applications of mesenchymal stem cell (MSC)-based bone tissue engineering have been investigated in various in vitro and in vivo models. In this regard, the promising animal bone defect models have been employed for illustrating the bone regenerative capacity of MSC-based bone tissue engineering. However, most studies aimed for clinical applications in human. These evidences suggest a knowledge gap to fulfill the accomplishment for veterinary implementation. In this review, the fundamental concept, knowledge, and technology of MSC-based bone tissue engineering focusing on veterinary applications are summarized. In addition, the potential canine MSCs resources for veterinary bone tissue engineering are reviewed, including canine bone marrow-derived MSCs, canine adipose-derived MSCs, and canine dental tissue-derived MSCs. This review will provide a basic and current information for studies aiming for the utilization of MSC-based bone tissue engineering in veterinary practice.

Rat Palatine Fissure: A Suitable Experimental Model for Evaluating Bone Regeneration

IMPACT STATEMENT

The rat palatine fissure is anatomically similar to human alveolar cleft. In this study, we examined potential bone repair by an autologous bone implant and beta-tricalcium phosphate (β-TCP) using rat palatine fissure as a model. Autologous bone chips or β-TCP granules were implanted into the rat palatine fissure. Our model demonstrated that higher bone volume and bone mineral density were achieved with autologous bone graft than with β-TCP. We have provided the first demonstration of the suitability of the rat palatine fissure as the implant site to simulate the transplantation of bone graft materials into human alveolar cleft.

Nonvascularized Bone Graft Reconstruction of the Irradiated Murine Mandible: An Analogue of Clinical Head and Neck Cancer Treatment

Nonvascularized bone grafts (NBGs) represent a practical method of mandibular reconstruction that is precluded in head and neck cancer patients by the destructive effects of radiotherapy. Advances in tissue-engineering may restore NBGs as a viable surgical technique, but expeditious translation demands a small-animal model that approximates clinical practice. This study establishes a murine model of irradiated mandibular reconstruction using a segmental iliac crest NBG for the investigation of imperative bone healing strategies. Twenty-seven male isogenic Lewis rats were divided into 2 groups; control bone graft and irradiated bone graft (XBG). Additional Lewis rats served as graft donors. The XBG group was administered a fractionated dose of 35Gy. All rats underwent reconstruction of a segmental, critical-sized defect of the left hemi-mandible with a 5 mm NBG from the iliac crest, secured by a custom radiolucent plate. Following a 60-day recovery period, hemi-mandibles were evaluated for bony union, bone mineralization, and biomechanical strength (P < 0.05). Bony union rates were significantly reduced in the XBG group (42%) compared with controls (80%). Mandibles in the XBG group further demonstrated substantial radiation injury through significant reductions in all metrics of bone mineralization and biomechanical strength. These observations are consistent with the clinical sequelae of radiotherapy that limit NBGs to nonirradiated patients. This investigation provides a clinically relevant, quantitative model in which innovations in tissue engineering may be evaluated in the setting of radiotherapy to ultimately provide the advantages of NBGs to head and neck cancer patients and reconstructive surgeons.

Incorporation of Ca ions into anodic oxide coatings on the Ti-13Nb-13Zr alloy by plasma electrolytic oxidation

The present work concerns the surface modification of The Ti-13Nb-13Zr alloy by electropolishing and plasma electrolytic oxidation (PEO) process in Ca-containing electrolytes: calcium formate and calcium lactate solutions (0.1-1.0 mol dm^-3) under voltages of 200 and 400 V. As a result of the PEO process, a porous oxide layer containing incorporated calcium compounds was formed on the Ti-13Nb-13Zr alloy surface. The morphology and chemical composition of the modified Ti-13Nb-13Zr alloy were investigated using scanning electron microscopy (SEM + EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). An increase in the applied voltage caused an increase in the number of pores and an increase in the amount of calcium incorporated in the oxide layer. Analysis showed that all samples were covered by titanium oxide, which was present in the form of anatase and/or rutile. In course of the experiments, it was showed that the proposed procedure has a positive effect on the overall bioactivity of the Ti-13Nb-13Zr alloy. Bioactivity investigations using simulated body fluid (SBF) confirmed the formation of apatite on the anodized surfaces. The cell adhesion results obtained by the use of human bone marrow mesenchymal stem cells (hBMSC) demonstrated that the PEO coatings on the Ti-13Nb-13Zr alloy remarkably enhanced the cytocompatibility of the substrate, indicating a potential application in orthopedic surgeries. The incorporation of Ca into the oxide layer proceeded to a higher extent when the PEO treatment was performed in the calcium lactate bath. The oxide layers formed in the calcium lactate solution exhibited also superior biological behavior towards hBMSC. This can be ascribed to the presence of carboxylic groups onto coatings' surface (as identified by XPS), which facilitated the anchoring of cells and tissues.

Biomaterial-based endochondral bone regeneration: a shift from traditional tissue engineering paradigms to developmentally inspired strategies

There is an urgent, clinical need for an alternative to the use of autologous grafts for the ever increasing number of bone grafting procedures performed annually. Herein, we describe a developmentally inspired approach to bone tissue engineering, which focuses on leveraging biomaterials as platforms for recapitulating the process of endochondral ossification. To begin, we describe the traditional biomaterial-based approaches to tissue engineering that have been investigated as methods to promote in vivo bone regeneration, including the use of three-dimensional biomimetic scaffolds, the delivery of growth factors and recombinant proteins, and the in vitro engineering of mineralized bone-like tissue. Thereafter, we suggest that some of the hurdles encountered by these traditional tissue engineering approaches may be circumvented by modulating the endochondral route to bone repair and, to that end, we assess various biomaterials that can be used in combination with cells and signaling factors to engineer hypertrophic cartilaginous grafts capable of promoting endochondral bone formation. Finally, we examine the emerging trends in biomaterial-based approaches to endochondral bone regeneration, such as the engineering of anatomically shaped templates for bone and osteochondral tissue engineering, the fabrication of mechanically reinforced constructs using emerging three-dimensional bioprinting techniques, and the generation of gene-activated scaffolds, which may accelerate the field towards its ultimate goal of clinically successful bone organ regeneration.

Digital Design, Analysis and 3D Printing of Prosthesis Scaffolds for Mandibular Reconstruction

Segmental mandibular reconstruction has been a challenge for medical practitioners, despite significant advances in medical technology. There is a recent trend in relation to customized implants, made up of porous structures. These lightweight prosthesis scaffolds present a new direction in the evolution of mandibular restoration. Indeed, the design and properties of porous implants for mandibular reconstruction should be able to recover the anatomy and contour of the missing region as well as restore the functions, including mastication, swallowing, etc. In this work, two different designs for customized prosthesis scaffold have been assessed for mandibular continuity. These designs have been evaluated for functional and aesthetic aspects along with effective osseointegration. The two designs classified as top and bottom porous plate and inner porous plate were designed and realized through the integration of imaging technology (computer tomography), processing software and additive manufacturing (Electron Beam Melting). In addition, the proposed designs for prosthesis scaffolds were analyzed for their biomechanical properties, structural integrity, fitting accuracy and heaviness. The simulation of biomechanical activity revealed that the scaffold with top and bottom porous plate design inherited lower Von Mises stress (214.77 MPa) as compared to scaffold design with inner porous plate design (360.22 MPa). Moreover, the top and bottom porous plate design resulted in a better fit with an average deviation of 0.8274 mm and its structure was more efficiently interconnected through the network of channels without any cracks or powder material. Verily, this study has demonstrated the feasibility and effectiveness of the customized porous titanium implants in mandibular reconstruction. Notice that the design and formation of the porous implant play a crucial role in restoring the desired mandibular performance.

Bone marrow mesenchymal stem cells: Aging and tissue engineering applications to enhance bone healing

Bone has well documented natural healing capacity that normally is sufficient to repair fractures and other common injuries. However, the properties of bone change throughout life, and aging is accompanied by increased incidence of bone diseases and compromised fracture healing capacity, which necessitate effective therapies capable of enhancing bone regeneration. The therapeutic potential of adult mesenchymal stem cells (MSCs) for bone repair has been long proposed and examined. Actions of MSCs may include direct differentiation to become bone cells, attraction and recruitment of other cells, or creation of a regenerative environment via production of trophic growth factors. With systemic aging, MSCs also undergo functional decline, which has been well investigated in a number of recent studies. In this review, we first describe the changes in MSCs during aging and discuss how these alterations can affect bone regeneration. We next review current research findings on bone tissue engineering, which is considered a promising and viable therapeutic solution for structural and functional restoration of bone. In particular, the importance of MSCs and bioscaffolds is highlighted. Finally, potential approaches for the prevention of MSC aging and the rejuvenation of aged MSC are discussed.

The Regenerative Applicability of Bioactive Glass and Beta-Tricalcium Phosphate in Bone Tissue Engineering: A Transformation Perspective

The conventional applicability of biomaterials in the field of bone tissue engineering takes into consideration several key parameters to achieve desired results for prospective translational use. Hence, several engineering strategies have been developed to model in the regenerative parameters of different forms of biomaterials, including bioactive glass and β-tricalcium phosphate. This review examines the different ways these two materials are transformed and assembled with other regenerative factors to improve their application for bone tissue engineering. We discuss the role of the engineering strategy used and the regenerative responses and mechanisms associated with them.

Characterisation of multipotent stem cells from human peripheral blood using an improved protocol

Background

A promising approach of bone repair is to use stem cells, such as mesenchymal stem cells (MSCs). Seeking available source of MSCs still remains a great challenge in tissue engineering and cell therapy. Peripheral blood (PB) emerges as an alternative source of MSCs which can be easily acquired with minimal invasiveness. This study was undertaken to evaluate the multipotency of PB-MSCs and effects of human PB-MSCs transplantation on ectopic bone regeneration in nude mice.

Methods

Human venous blood collected was mixed with heparin and then red blood cells were removed using red blood cell lysis buffer. Cell suspension was cultured in normoxia-culture and hypoxia-culture conditions, respectively. The non-adherent cells were removed by half changing culture media every three days. Cells were selected due to plastic adherence. The adherent cells were then passaged and subjected to multi-differentiation induction assays in vitro and in vivo ectopic bone formation assay.

Results

Characterization assays indicated that cells cultured under hypoxia possessed potent multi-lineage differentiation capacity and expressed Nanog and Lgr5, as well as a series of MSC surface antigens (including CD29, CD90, CD105, and CD73). Additionally, regenerated bone tissues by transplantation of human PB-MSCs in vivo were confirmed by histological examinations of ectopic osteogenesis assay. A purified population of MSCs can be obtained within a short period of time using this protocol with a successful rate of 60%.

Conclusion

We reported an effective and reliable method to harvest highly purified MSCs with potent multi-differentiation potential from human peripheral blood. Lgr5 may be a potential biomarker for identification of a subpopulation of PB-MSCs.

The translational potential of this article

PB-MSCs is an alternative cell source for cell therapy, which may be harvested, culture expanded and PB-MSCs loaded with β-tricalcium phosphate (β-TCP) may be used to promote bone repair.

Placental Stem Cells from Domestic Animals: Translational Potential and Clinical Relevance

The field of regenerative medicine is moving toward clinical practice in veterinary science. In this context, placenta-derived stem cells isolated from domestic animals have covered a dual role, acting both as therapies for patients and as a valuable cell source for translational models. The biological properties of placenta-derived cells, comparable among mammals, make them attractive candidates for therapeutic approaches. In particular, stemness features, low immunogenicity, immunomodulatory activity, multilineage plasticity, and their successful capacity for long-term engraftment in different host tissues after autotransplantation, allo-transplantation, or xenotransplantation have been demonstrated. Their beneficial regenerative effects in domestic animals have been proven using preclinical studies as well as clinical trials starting to define the mechanisms involved. This is, in particular, for amniotic-derived cells that have been thoroughly studied to date. The regenerative role arises from a mutual tissue-specific cell differentiation and from the paracrine secretion of bioactive molecules that ultimately drive crucial repair processes in host tissues (e.g., anti-inflammatory, antifibrotic, angiogenic, and neurogenic factors). The knowledge acquired so far on the mechanisms of placenta-derived stem cells in animal models represent the proof of concept of their successful use in some therapeutic treatments such as for musculoskeletal disorders. In the next future, legislation in veterinary regenerative medicine will be a key element in order to certify those placenta-derived cell-based protocols that have already demonstrated their safety and efficacy using rigorous approaches and to improve the degree of standardization of cell-based treatments among veterinary clinicians.

A standardized rat burr hole defect model to study maxillofacial bone regeneration

With high incidence rate and unique regeneration features, maxillofacial burr hole bone defects require a specially designed bone defect animal model for the evaluation of related bone regenerative approaches. Although some burr hole defect models have been developed in long bones or calvarial bones, the mandible has unique tissue development origins and regenerative environments. This suggests that the defect model should be prepared in the maxillofacial bone area. After dissecting the anatomic structures of rat mandibles, we found that creating defects in the anterior tooth area avoided damaging important organs and improved animal welfare. Furthermore, the available bone volume at the anterior tooth area was superior to that of the posterior tooth and ascending ramus areas. We then managed to standardize the model by controlling the age, weight and gender of the animal, creating standardized measurement instruments and reducing the variations derived from various operators. We also succeeded in deterring the self-rehabilitation of the proposed model by increasing the defect size. The 6 × 2 mm and 8 × 2 mm defects were found to meet the requirements of bone regenerative studies. This study provided a step-by-step standardized burr hole bone defect model with minimal tissue damage in small animals. The evaluations resulting from this model testify to the in vitro outcomes of the proposed regenerative approaches and provide preliminary screening data for further large animal and clinical trials. Therefore, the inclusion of this model may optimize the evaluation systems for maxillofacial burr hole bone defect regenerative approaches. STATEMENT OF SIGNIFICANCE: Unremitting effort has been devoted to the development of bone regenerative materials to restore maxillofacial burr hole bone defects because of their high clinical incidence rate. In the development of these biomaterials, in vivo testing in small animals is necessary to evaluate the effects of candidate biomaterials. However, little has been done to develop such defect models in small animals. In this study, we developed a standardized rat mandible burr hole bone defect model with minimal injury to the animals. A detailed description and supplementary video were provided to guide the preparation. The development of this model optimizes the maxillofacial bone regenerative approach evaluation system.

[Local injection of angiopoietin 2 promotes angiogenesis in tissue engineered bone and repair of bone defect with autophagy induction in vivo]

Objective

To investigate the mechanism of early vascularization of the tissue engineered bone in the treatment of rabbit radial bone defect by local injection of angiopoietin 2 (Ang-2).

Methods

A single 1.5 cm long radius defect model (left and right sides randomised) was constructed from 48 New Zealand white rabbits. After implantation of hydroxyapatite/collagen scaffolds in bone defects, the rabbits were randomly divided into 2 groups: control group (group A) and Ang-2 group (group B) were injected with 1 mL normal saline and 1 mL saline-soluble 400 ng/mL Ang-2 daily at the bone defect within 2 weeks after operation, respectively. Western blot was used to detect the expressions of autophagy related protein [microtubule associated protein 1 light chain 3 (LC3), Beclin-1], angiogenesis related protein [vascular endothelial growth factor (VEGF)], and autophagy degradable substrate protein (SQSTMl/p62) in callus. X-ray films examination and Lane-Sandhu X-ray scoring were performed to evaluate the bone defect repair at 4, 8, and 12 weeks after operation. The rabbits were sacrificed at 12 weeks after operation for gross observation, and the angiogenesis of bone defect was observed by HE staining.

Results

Western blot assay showed that the relative expression of LC3-II/LC3-I, Beclin-1, and VEGF in group B was significantly higher than that in group A, and the relative expression of SQSTMl/p62 was significantly lower than that in group A ( P<0.05). Radiographic and gross observation of specimens showed that only a small number of callus were formed in group A, the bone defect was not repaired; more callus were formed and complete repair of bone defect was observed in group B. The Lane-Sandhu scores in group B were significantly higher than those in group A at 4, 8, and 12 weeks after operation ( P<0.05). HE staining showed that the Harvard tubes in group B were well arranged and the number of new vessels was significantly higher than that in group A ( t=-11.879, P=0.000).

Conclusion

Local injection of appropriate concentration of Ang-2 may promote early vascularization and bone defect repair of rabbit tissue engineered bone by enhancing autophagy.

Synthetic and Marine-Derived Porous Scaffolds for Bone Tissue Engineering

Bone is a vascularized and connective tissue. The cortical bone is the main part responsible for the support and protection of the remaining systems and organs of the body. The trabecular spongy bone serves as the storage of ions and bone marrow. As a dynamic tissue, bone is in a constant remodelling process to adapt to the mechanical demands and to repair small lesions that may occur. Nevertheless, due to the increased incidence of bone disorders, the need for bone grafts has been growing over the past decades and the development of an ideal bone graft with optimal properties remains a clinical challenge. This review addresses the bone properties (morphology, composition, and their repair and regeneration capacity) and puts the focus on the potential strategies for developing bone repair and regeneration materials. It describes the requirements for designing a suitable scaffold material, types of materials (polymers, ceramics, and composites), and techniques to obtain the porous structures (additive manufacturing techniques like robocasting or derived from marine skeletons) for bone tissue engineering applications. Overall, the main objective of this review is to gather the knowledge on the materials and methods used for the production of scaffolds for bone tissue engineering and to highlight the potential of natural porous structures such as marine skeletons as promising alternative bone graft substitute materials without any further mineralogical changes, or after partial or total transformation into calcium phosphate.

Nonunion fractures, mesenchymal stem cells and bone tissue engineering

Depending on the duration of healing process, 5-10% of bone fractures may result in either nonunion or delayed union. Because nonunions remain a clinically important problem, there is interest in the utilization of tissue engineering strategies to augment bone fracture repair. Three basic biologic elements that are required for bone regeneration include cells, extracellular matrix scaffolds and biological adjuvants for growth, differentiation and angiogenesis. Mesenchymal stem cells (MSCs) are capable to differentiate into various types of the cells including chondrocytes, myoblasts, osteoblasts, and adipocytes. Due to their potential for multilineage differentiation, MSCs are considered important contributors in bone tissue engineering research. In this review we highlight the progress in the application of biomaterials, stem cells and tissue engineering in promoting nonunion bone fracture healing. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A:2551-2561, 2018.

Nano-Biphasic Calcium Phosphate Ceramic for the Repair of Bone Defects

Calcium phosphate bioceramics has recently experienced increased interest in bone reconstruction. Mimicking of natural structure of bone, like the use of nanomaterials, is an attractive approach for generating scaffolds for bone regeneration. The aim of present study was to evaluate the effect of nanonization on the biphasic calcium phosphate (BCP) ceramic in the repair of bone cavities in the canine mandible. A commercial BCP was dry-milled in a high energy planetary ball mill with zirconia balls and container. Three holes (8 mm in diameter) were outlined to the depth of cortical bone of mandibular angle of 5 dogs bilaterally. The first hole (positive control group A, n = 10) was filled in with commercial BCP material. The second hole was loaded with the nanonized BCP (experimental group C, n = 10) and the third one was left untreated (negative control group B, n = 10). The defects were allowed to regenerate for 8 weeks. New bone formation was greater in groups A and C than in B. No difference was seen between group A and group C (P = 0.676). The residual bone material in group C (19.34 ± 8.03) was as much as one-half of that in group A (38.69 ± 7.90%) (P = 0.000). The negative control group B presented the highest amount of soft tissue within the bone defects. The least percentage of marrow space was found in the positive control group (13.23 ± 13.52). Our results depicted that the rate of resorption increased significantly after nanonization even though the nano-sized BCP failed to make a superior regeneration than the ordinary BCP.

Micro-Nanostructures of Cellulose-Collagen for Critical Sized Bone Defect Healing

Bone tissue engineering strategies utilize biodegradable polymeric matrices alone or in combination with cells and factors to provide mechanical support to bone, while promoting cell proliferation, differentiation, and tissue ingrowth. The performance of mechanically competent, micro-nanostructured polymeric matrices, in combination with bone marrow stromal cells (BMSCs), is evaluated in a critical sized bone defect. Cellulose acetate (CA) is used to fabricate a porous microstructured matrix. Type I collagen is then allowed to self-assemble on these microstructures to create a natural polymer-based, micro-nanostructured matrix (CAc). Poly (lactic-co-glycolic acid) matrices with identical microstructures serve as controls. Significantly higher number of implanted host cells are distributed in the natural polymer based micro-nanostructures with greater bone density and more uniform cell distribution. Additionally, a twofold increase in collagen content is observed with natural polymer based scaffolds. This study establishes the benefits of natural polymer derived micro-nanostructures in combination with donor derived BMSCs to repair and regenerate critical sized bone defects. Natural polymer based materials with mechanically competent micro-nanostructures may serve as an alternative material platform for bone regeneration.

Osteocytogenesis: Roles of Physicochemical Factors, Collagen Cleavage, and Exogenous Molecules

Osteocytes, the most abundant cell type in mammalian bone, are generally considered as the terminally differentiated cells of osteoblasts that are progressively self-buried or passively embedded in bone matrix. Emerging evidence reveals the essential functions of osteocytes in bone homeostasis and mechanotransduction. However, our knowledge on osteocytes, especially their formation, remains scarce. In this regard, the current review mainly focuses on several key factors that drive the osteocytic differentiation of osteoblasts, that is, osteocytogenesis. Available literature has demonstrated the involvement of physicochemical factors such as matrix composition, oxygen tension, and mechanical stress in the osteoblast-to-osteocyte transition. During cell migration and matrix remodeling, the matrix metalloproteinase-dependent collagen cleavage would play an "active" role in maturation and maintenance of the osteocytes. Besides, some in vitro methodologies are also established to induce the transformation of osteoblastic cell lines and primary mesenchymal cells to preosteocytes through cell transfection or addition of exogenous molecules (e.g., fibroblast growth factor-2, retinoic acid), which could potentiate the effort to form functional bone substitutes through elevated osteocytogenesis. Thus, advances of new technologies would enable comprehensive and in-depth understanding of osteocytes and their development, which in turn help promote the research on osteocyte biology and osteopathology.

Carbon nanotube, graphene and boron nitride nanotube reinforced bioactive ceramics for bone repair

The high brittleness and low strength of bioactive ceramics have severely restricted their application in bone repair despite the fact that they have been regarded as one of the most promising biomaterials. In the last few years, low-dimensional nanomaterials (LDNs), including carbon nanotubes, graphene and boron nitride nanotubes, have gained increasing attention owing to their favorable biocompatibility, large surface specific area and super mechanical properties. These qualities make LDNs potential nanofillers in reinforcing bioactive ceramics. In this review, the types, characteristics and applications of the commonly used LDNs in ceramic composites are summarized. In addition, the fabrication methods for LDNs/ceramic composites, such as hot pressing, spark plasma sintering and selective laser sintering, are systematically reviewed and compared. Emphases are placed on how to obtain the uniform dispersion of LDNs in a ceramic matrix and maintain the structural stability of LDNs during the high-temperature fabrication process of ceramics. The reinforcing mechanisms of LDNs in ceramic composites are then discussed in-depth. The in vitro and in vivo studies of LDNs/ceramic in bone repair are also summarized and discussed. Finally, new developments and potential applications of LDNs/ceramic composites are further discussed with reference to experimental and theoretical studies.

STATEMENT OF SIGNIFICANCE

Despite bioactive ceramics having been regarded as promising biomaterials, their high brittleness and low strength severely restrict their application in bone scaffolds. In recent years, low-dimensional nanomaterials (LDNs), including carbon nanotubes, graphene and boron nitride nanotubes, have shown great potential in reinforcing bioactive ceramics owing to their unique structures and properties. However, so far it has been difficult to maintain the structural stability of LDNs during fabrication of LDNs/ceramic composites, due to the lengthy, high-temperature process involved. This review presents a comprehensive overview of the developments and applications of LDNs in bioactive ceramics. The newly-developed fabrication methods for LDNs/ceramic composites, the reinforcing mechanisms and the in vitro and in vivo performance of LDNs are also summarized and discussed in detail.

The role of bone marrow aspirate cells in the management of atrophic mandibular fractures by mini-invasive surgical approach: Single-institution experience

PURPOSE

The treatment of fractures involves addressing the biology of fracture repair and the mechanical stability of fracture fixation. Traditionally it has included the addition of bone graft to enhance healing. New advances in the understanding of the cellular and molecular mechanisms of fracture repair have led to the use of growth factors to accelerate bone healing. This study aimed to assess the advantages of autologous stem cell use for atrophic mandibular fracture treatment in comparison to standard technique.

MATERIALS AND METHODS

A total of 35 patients (14 male and 21 female) were treated for fractures of atrophic mandibles between January 2011 and December 2014. Surgical technique provided mini-invasive open reduction with or without immediate homologous bone graft, while selected patients received autologous bone marrow aspirate cell grafts in addition to the standard treatment. Demographic data and details of treatment and outcomes were recorded.

RESULTS

Patients were categorized according to the use of autologous stem cells, leaving 17 patients treated with standard technique and autologous stem cells (Group A) and 18 treated with standard osteosynthesis only (Group B). Of the 35 patients, 26 had bilateral fractures; most patients had significant medical co-morbidities. Immediate bone graft was used in 37.1% of patients (7 in group A and 6 in group B). Complications occurred in 5 patients (14.3%). Two patients in group B (11.1%) showed non-union of the fracture. One patient in group A (5.8%) and one patient in group B (5.5%) showed wound dehiscence and were treated conservatively; one patient in group B had a local infection (5.5%), one out of 35 (2.8%), that was managed by prolonged antibiotic treatment.

CONCLUSIONS

Despite the advanced age and medical co-morbidities of the vast majority of patients, mini-invasive open approach with autologous bone graft ensures a fast and excellent recovery. Moreover, the management of atrophic mandibular fractures by bone marrow aspirate cells is a safe and useful procedure which has a lower complication rate when compared to standard technique.

Three-Dimensional Printed Scaffolds with Multipotent Mesenchymal Stromal Cells for Rabbit Mandibular Reconstruction and Engineering

Multipotent mesenchymal stromal cells (MSC) derived from both the bone marrow and adipose tissue possess the ability to differentiate into multiple cell lineages, regulate the immune function by secreting numerous bioactive paracrine factors, and hold great potential in cell therapy and tissue engineering. When combined with three-dimensional (3D) scaffolds, MSC can be used for bone defect reconstruction and engineering. This protocol describes the isolation of bone marrow mesenchymal stromal cells (BMMSC) and adipose-tissue derived stem cells (ADSC) from rabbits for subsequent seeding on tissue-engineered 3D-printed scaffolds and transplantation into a rabbit-model with the goal of repairing large osseous mandibular defects (one quarter of the lower jaw is removed surgically). Steps to demonstrate the three cell differentiation lineage potentials of BMMSC and ADSC into osteocytes, adipocytes, and chondrocytes are described. A modified cell seeding method using syringes on scaffold is detailed. Creating a large mandibular bone defect, the rapid prototyping method to print a customized 3D-scaffold, the scaffold implantation procedure in rabbits, and microcomputed tomography (micro-CT) analysis are also described.