Bulk and interface investigations of scaffolds and tissue-engineered bones by X-ray microtomography and X-ray microdiffraction

Comparison of Structural Behavior Following Bone Scaffold Implantation in Multi-Resolution Proximal Femur Images

Bone scaffolds are increasingly regarded as viable alternatives to autografts and allografts in clinical settings. However, their effectiveness can vary based on certain anatomical characteristics, highlighting the importance of image-based structural analysis. High-resolution imaging is crucial to accurately assess the performance of bone scaffolds. Despite this, the resolution of current clinical medical images is constrained by concerns regarding radiation exposure. The efficacy of these analyses can be improved by quantitatively evaluating the similarities and differences between low- and high-resolution images. This study quantitatively compared the structural behavior of bone scaffolds using both high- and low-resolution images. This study downscaled a high-resolution image, implanted a bone scaffold, and conducted finite element analysis. The findings suggest that the resolution needed for accurate structural analysis of skeletal images varies based on the implantation site of the scaffold. Additionally, it was found that the less influence the loading conditions have, the higher the resolution required to accurately assess the structural behavior.

Injectable pH-responsive adhesive hydrogels for bone tissue engineering inspired by the underwater attachment strategy of marine mussels

A major challenge in tissue engineering is the development of alternatives to traditional bone autografts and allografts that can regenerate critical-sized bone defects. Here we present the design of injectable pH-responsive double-crosslinked adhesive hydrogels inspired by the molecular mechanism and environmental post-processing of marine mussel adhesive. Nine adhesive hydrogel formulations were developed through the conjugation of crosslinkable catechol functional groups (DOPA) and the synthetic oligomer oligo[poly(ethylene glycol) fumarate] (OPF), varying the DOPA content (w/w%) and molecular weight (MW) of the OPF backbone to produce formulations with a range of swelling ratios, porosities, and crosslink densities. DOPA incorporation altered the surface chemistry, mechanical properties, and surface topography of hydrogels, resulting in an increase in material stiffness, slower degradation, and enhanced pre-osteoblast cell attachment and proliferation. When injected within simulated bone defects, DOPA-mediated interfacial adhesive interactions also prevented the displacement of scaffolds, an effect that was maintained even after swelling within physiological conditions. Taken together, OPF-DOPA hydrogels represent a promising new material to enhanced tissue integration and the prevention of the post-implantation migration of scaffolds that can occur due to biomechanical loading in vivo.

Combining grazing incidence X-rays and micro-diffraction for qualitative phase identification in forensic powdered micro-samples

Capillary diffraction or microdiffraction are standard techniques for characterizing small samples when only a few milligrams are available. On the other hand, we have typical grazing incidence diffraction or different variations of grazing incidence (GI) diffraction used, such as in-plane grazing incidence (IP-GI) or GI using a micro focusing source, to study thin films. However, when few powder micrograms are available, the characterization task is complicated. In the present work, few micrograms of typical forensic samples are analyzed using standard Bragg-Brentano, X-ray powder diffraction geometry, and grazing incidence X-ray micro-diffraction (GIµXRD). Samples include soils, cosmetic eyeshadows, two different pyrotechnic materials, and a highly explosive mixture contained at primer cup of ammunition. The analysis was carried out from 1 to 5 degrees of the incident parallel beam with a shaking sample. Depending on the fixed incident angle, different small regions of the diffraction patterns showed an improvement in the intensity of the peaks with respect to the conventional Bragg-Brentano configuration. However, 3-5 degrees of the fixed incident beam showed the best results. This new data acquisition technique, based on the combination of two known diffraction methods, could be a powerful tool for studying samples outside of forensic sciences such as nanomaterials, medicine, or any other field where the sample quantity is extremely small, also, without the need to transport evidence and travel to external facilities with higher analytical performance such as synchrotron radiation installations or other large experimental facilities.

High resolution imaging in bone tissue research-review

This review article focuses on imaging of bone tissue to understand skeletal health with regards to bone quality. Skeletal fragility fractures are due to bone diseases such as osteoporosis which result in low bone mass and bone mineral density (BMD) leading to high risk of fragility fractures. Recent advances in imaging and analysis technologies have highly benefitted the field of biological sciences. In particular, their application in skeletal health has been of significant importance in understanding bone mechanical behavior (structure and properties) at the tissue level. While synchrotron based microCT technique has remained the gold standard for non-destructive evaluation of structure in material and biological sciences, several lab based microCT systems have been developed to provide high resolution imaging of specimens with greater access, and ease of use in laboratory settings. Lab based microCT scanners are widely used in the bone field as a standard tool to evaluate three-dimensional (3D) morphologies of bone structure at image resolutions appropriate for bone samples from small animals to bone biopsy specimens from humans. Both synchrotron and standard lab based microCT systems provide high resolution imaging ex vivo for a small sized specimen. A few X-ray based systems are also commercially available for in vivo scanning at relatively low image resolutions. Synchrotron-based CT microscopy is being used for various ultra-high-resolution image analyses using complex 3D software. However, the synchrotron-based CT technology is in high demand, allows only limited numbers of specimens, expensive, requires complex additional instrumentation, and is not easily available to researchers as it requires access to a synchrotron source which is always limited. Therefore, desktop laboratory scanners (microXCT, Zeiss/Xradia, Scanco, SkyScan. etc.), mimicking the synchrotron based CT technology or image resolution, have been developed to solve the accessibility issues. These lab based scanners have helped both material science, and the bone field to investigate bone tissue morphologies at submicron mage resolutions. Considerable progress has been made in both in vivo and ex vivo imaging towards providing high resolution images of bone tissue. Both clinical and research imaging technologies will continue to improve and help understand osteoporosis and other related skeletal issues in order to develop targeted treatments for bone fragility. This review summarizes the high resolution imaging work in bone research.

Assessment of the interplay between scaffold geometry, induced shear stresses, and cell proliferation within a packed bed perfusion bioreactor

By favoring cell proliferation and differentiation, perfusion bioreactors proved efficient at optimizing cell culture. The aim of this study was to quantify cell proliferation within a perfusion bioreactor and correlate it to the wall shear stress (WSS) distribution by combining 3-D imaging and computational fluid dynamics simulations.NIH-3T3 fibroblasts were cultured onto a scaffold model made of impermeable polyacetal spheres or Polydimethylsiloxane cubes. After 1, 2, and 3 weeks of culture, constructs were analyzed by micro-computed tomography (μCT) and quantification of cell proliferation was assessed. After 3 weeks, the volume of cells was found four times higher in the stacking of spheres than in the stacking of cube.3D-μCT reconstruction of bioreactors was used as input for the numerical simulations. Using a lattice-Boltzmann method, we simulated the fluid flow within the bioreactors. We retrieved the WSS distribution (PDF) on the scaffolds surface at the beginning of cultivation and correlated this distribution to the local presence of cells after 3 weeks of cultivation. We found that the WSS distributions strongly differ between spheres and cubes even if the porosity and the specific wetted area of the stackings were very similar. The PDF is narrower and the mean WSS is lower for cubes (11 mPa) than for spheres (20 mPa). For the stacking of spheres, the relative occupancy of the surface sites by cells is maximal when WSS is greater than 20 mPa. For cubes, the relative occupancy is maximal when the WSS is lower than 10 mPa. The discrepancies between spheres and cubes are attributed to the more numerous sites in stacking of spheres that may induce 3-D (multi-layered) proliferation.

Osteo-regeneration personalized for children by rapid maxillary expansion: an imaging study based on synchrotron radiation microtomography

Background

Personalized maxillary expansion procedure has been proposed to correct maxillary transversal deficiency; different protocols of stem cell activation have been suggested and rapid maxillary expansion (RME) is the most commonly used among clinicians. The present study aimed to quantify in three-dimensions (3D) the osteo-regeneration of the midpalatal suture in children submitted to RME.

Methods

Three patients (mean age 8.3 ± 0.9 years) were enrolled in the study to preform biopsy of midpalatal suture. Two patients (subjects 1 and 2) were subjected to RME before biopsy. The third patient did not need maxillary expansion treatment and was enrolled as control (subject 3). Midpalatal suture samples were harvested 7 days after RME in subject 1, and 30 days after RME in subject 2. The samples were harvested with the clinical aim to remove bone for the supernumerary tooth extraction. When possible, maxillary suture and bone margins were both included in the sample. All the biopsies were evaluated by complementary imaging techniques, namely Synchrotron Radiation-based X-ray microtomography (microCT) and comparative light and electron microscopy.

Results

In agreement with microscopy, it was detected by microCT a relevant amount of newly formed bone both 7 days and 30 days after RME, with bone growth and a progressive mineralization, even if still immature respect to the control, also 30 days after RME. Interestingly, the microCT showed that the new bone was strongly connected and cross-linked, without a preferential orientation perpendicular to the suture’s long axis (previously hypothesized by histology), but with well-organized and rather isotropic 3D trabeculae.

Conclusions

The microCT imaging revealed, for the first time to the authors’ knowledge, the 3D bone regeneration in children submitted to RME.

Electronic supplementary material

The online version of this article (10.1186/s12903-018-0590-7) contains supplementary material, which is available to authorized users.

Silk fibroin micro-particle scaffolds with superior compression modulus and slow bioresorption for effective bone regeneration

Silk fibroin (SF), a natural polymer produced by Bombyx mori silkworms, has been extensively explored to prepare porous scaffolds for tissue engineering applications. Here, we demonstrate, a scaffold made of SF, which exhibits compression modulus comparable to natural cancellous bone while retaining the appropriate porosities and interconnected pore architecture. The scaffolds also exhibit high resistance to in-vitro proteolytic degradation due to the dominant beta sheet conformation of the SF protein. Additionally, the scaffolds are prepared using a simple method of microparticle aggregation. We also demonstrate, for the first time, a method to prepare SF micro-particles using a Hexafluoroisopropanol-Methanol solvent-coagulant combination. SF microparticles obtained using this method are monodisperse, spherical, non-porous and extremely crystalline. These micro-particles have been further aggregated together to form a 3D scaffold. The aggregation is achieved by random packing of these microparticles and fusing them together using a dilute SF solution. Preliminary in-vitro cell culture and in-vivo implantation studies demonstrate that the scaffolds are biocompatible and they exhibit the appropriate early markers, making them promising candidates for bone regeneration.

High-Resolution X-Ray Tomography: A 3D Exploration Into the Skeletal Architecture in Mouse Models Submitted to Microgravity Constraints

Bone remodeling process consists in a slow building phase and in faster resorption with the objective to maintain a functional skeleton locomotion to counteract the Earth gravity. Thus, during spaceflights, the skeleton does not act against gravity, with a rapid decrease of bone mass and density, favoring bone fracture. Several studies approached the problem by imaging the bone architecture and density of cosmonauts returned by the different spaceflights. However, the weaknesses of the previously reported studies was two-fold: on the one hand the research suffered the small statistical sample size of almost all human spaceflight studies, on the other the results were not fully reliable, mainly due to the fact that the observed bone structures were small compared with the spatial resolution of the available imaging devices. The recent advances in high-resolution X-ray tomography have stimulated the study of weight-bearing skeletal sites by novel approaches, mainly based on the use of the mouse and its various strains as an animal model, and sometimes taking advantage of the synchrotron radiation support to approach studies of 3D bone architecture and mineralization degree mapping at different hierarchical levels. Here we report the first, to our knowledge, systematic review of the recent advances in studying the skeletal bone architecture by high-resolution X-ray tomography after submission of mice models to microgravity constrains.

Quantitative Kinetics Evaluation of Blocks Versus Granules of Biphasic Calcium Phosphate Scaffolds (HA/β-TCP 30/70) by Synchrotron Radiation X-ray Microtomography: A Human Study

INTRODUCTION

Successful bone regeneration using both granules and blocks of biphasic calcium phosphate materials has been reported in the recent literature, in some clinical applications for maxillary sinus elevation, but the long-term kinetics of bone regeneration has still not been fully investigated.

MATERIALS AND METHODS

Twenty-four bilateral sinus augmentation procedures were performed and grafted with hydroxyapatite/β-tricalcium phosphate 30/70, 12 with granules and 12 with blocks. The samples were retrieved at different time points and were evaluated for bone regeneration, graft resorption, neovascularization, and morphometric parameters by computed microtomography and histology.

RESULTS

A large amount of newly formed bone was detected in the retrieved specimens, together with a good rate of biomaterial resorption and the formation of a homogeneous and rich net of new vessels. The morphometric values were comparable at 5/6 months from grafting but, 9 months after grafting, revealed that the block-based specimens mimicked slightly better than granule-based samples the healthy native bone of the maxillary site.

CONCLUSION

The scaffold morphology was confirmed to influence the long-term kinetics of bone regeneration.

Role of Cortico-Cancellous Heterologous Bone in Human Periodontal Ligament Stem Cell Xeno-Free Culture Studied by Synchrotron Radiation Phase-Contrast Microtomography

This study was designed to quantitatively demonstrate via three-dimensional (3D) images, through the Synchrotron Radiation Phase-Contrast Microtomography (SR-PhC-MicroCT), the osteoinductive properties of a cortico-cancellous scaffold (Osteobiol Dual Block—DB) cultured with human Periodontal Ligament Stem Cells (hPDLSCs) in xeno-free media. In vitro cultures of hPDLSCs, obtained from alveolar crest and horizontal fibers of the periodontal ligament, were seeded onto DB scaffolds and cultured in xeno-free media for three weeks. 3D images were obtained by SR-PhC-microCT after one and three weeks from culture beginning. MicroCT data were successively processed with a phase-retrieval algorithm based on the Transport of Intensity Equation (TIE). The chosen experimental method, previously demonstratively applied for the 3D characterization of the same constructs in not xeno-free media, quantitatively monitored also in this case the early stages of bone formation in basal and differentiating conditions. Interestingly, it quantitatively showed in the xeno-free environment a significant acceleration of the mineralization process, regardless of the culture (basal/differentiating) medium. This work showed in 3D that the DB guides the osteogenic differentiation of hPDLSCs in xeno-free cultures, in agreement with 2D observations and functional studies previously performed by some of the authors. Indeed, here we fully proved in 3D that expanded hPDLSCs, using xeno-free media formulation, not only provide the basis for Good Manufacturing Practice (preserving the stem cells’ morphological features and their ability to differentiate into mesenchymal lineage) but have to be considered, combined to DB scaffolds, as interesting candidates for potential clinical use in new custom made tissue-engineered constructs.

Challenges in engineering large customized bone constructs

The ability to treat large tissue defects with customized, patient-specific scaffolds is one of the most exciting applications in the tissue engineering field. While an increasing number of modestly sized tissue engineering solutions are making the transition to clinical use, successfully scaling up to large scaffolds with customized geometry is proving to be a considerable challenge. Managing often conflicting requirements of cell placement, structural integrity, and a hydrodynamic environment supportive of cell culture throughout the entire thickness of the scaffold has driven the continued development of many techniques used in the production, culturing, and characterization of these scaffolds. This review explores a range of technologies and methods relevant to the design and manufacture of large, anatomically accurate tissue-engineered scaffolds with a focus on the interaction of manufactured scaffolds with the dynamic tissue culture fluid environment. Biotechnol. Bioeng. 2017;114: 1129-1139. © 2016 Wiley Periodicals, Inc.

Strength increase during ceramic biomaterial-induced bone regeneration: a micromechanical study

Bone tissue engineering materials must blend in the targeted physiological environment, in terms of both the materials' biocompatibility and mechanical properties. As for the latter, a well-adjusted stiffness ensures that the biomaterial's deformation behavior fits well to the deformation behavior of the surrounding biological tissue, whereas an appropriate strength provides sufficient load-carrying capacity of the biomaterial. Here, a mathematical modeling approach for estimating the macroscopic load that initiates failure of a hierarchically organized, granular, hydroxyapatite-based biomaterial is presented. For this purpose, a micromechanics model is developed for downscaling macroscopically prescribed stress (or strain) states to the level of the needle-shaped hydroxyapatite crystals. Presuming that the biomaterial fails due to the quasi-brittle failure of the most unfavorably stressed hydroxyapatite needle, the downscaled stress tensors are fed into a suitable, Mohr-Coulomb-type failure criterion, based on which the macroscopic failure load is deduced. The change of the biomaterial's composition in response to placing it in physiological solution, caused by growth of new bone tissue on the granules's surfaces, on the one hand, and by resorption of the hydroxyapatite crystals, on the other hand, is taken into account by means of suitable evolution laws. Numerical studies show how the macroscopic load-carrying capacity of the biomaterial is influenced by its design parameters. The presented modeling approach could prove beneficial for the design process of the studied biomaterials (as well as similarly composed biomaterials), particularly in terms of optimizing its mechanical performance.

Multiscale Mathematical Modeling in Dental Tissue Engineering: Toward Computer-Aided Design of a Regenerative System Based on Hydroxyapatite Granules, Focussing on Early and Mid-Term Stiffness Recovery

We here explore for the very first time how an advanced multiscale mathematical modeling approach may support the design of a provenly successful tissue engineering concept for mandibular bone. The latter employs double-porous, potentially cracked, single millimeter-sized granules packed into an overall conglomerate-type scaffold material, which is then gradually penetrated and partially replaced by newly grown bone tissue. During this process, the newly developing scaffold-bone compound needs to attain the stiffness of mandibular bone under normal physiological conditions. In this context, the question arises how the compound stiffness is driven by the key design parameters of the tissue engineering system: macroporosity, crack density, as well as scaffold resorption/bone formation rates. We here tackle this question by combining the latest state-of-the-art mathematical modeling techniques in the field of multiscale micromechanics, into an unprecedented suite of highly efficient, semi-analytically defined computation steps resolving several levels of hierarchical organization, from the millimeter- down to the nanometer-scale. This includes several types of homogenization schemes, namely such for porous polycrystals with elongated solid elements, for cracked matrix-inclusion composites, as well as for assemblies of coated spherical compounds. Together with the experimentally known stiffnesses of hydroxyapatite crystals and mandibular bone tissue, the new mathematical model suggests that early stiffness recovery (i.e., within several weeks) requires total avoidance of microcracks in the hydroxyapatite scaffolds, while mid-term stiffness recovery (i.e., within several months) is additionally promoted by provision of small granule sizes, in combination with high bone formation and low scaffold resorption rates.

Scanning Small- and Wide-Angle X-ray Scattering Microscopy Selectively Probes HA Content in Gelatin/Hydroxyapatite Scaffolds for Osteochondral Defect Repair

This study is aimed at investigating the structure of a scaffold made of bovine gelatin and hydroxyapatite for bone tissue engineering purposes. In particular, the detailed characterization of such a material has a great relevance because of its application in the healing process of the osteochondral defect that consists of a damage of cartilage and injury of the adjacent subchondral bone, significantly compromising millions of patient's quality of life. Two different techniques exploiting X-ray radiation, with table-top setups, are used: microtomography (micro-CT) and microdiffraction. Micro-CT characterizes the microstructure in the three dimensions at the micrometer scale spatial resolution, whereas microdiffraction provides combined structural/morphological information at the atomic and nanoscale, in two dimensional microscopy images with a hundred micrometer spatial resolution. The combination of these two techniques allowed an appropriate structural characterization for the purpose of validating the engineering approach used for the realization of the hydroxyapatite gradient across the scaffold, with properties close to the natural model.

Design and characterization of calcium phosphate ceramic scaffolds for bone tissue engineering

OBJECTIVES

Our goal is to review design strategies for the fabrication of calcium phosphate ceramic scaffolds (CPS), in light of their transient role in bone tissue engineering and associated requirements for effective bone regeneration.

METHODS

We examine the various design options available to meet mechanical and biological requirements of CPS and later focus on the importance of proper characterization of CPS in terms of architecture, mechanical properties and time-sensitive properties such as biodegradability. Finally, relationships between in vitro versus in vivo testing are addressed, with an attempt to highlight reliable performance predictors.

RESULTS

A combinatory design strategy should be used with CPS, taking into consideration 3D architecture, adequate surface chemistry and topography, all of which are needed to promote bone formation. CPS represent the media of choice for delivery of osteogenic factors and anti-infectives. Non-osteoblast mediated mineral deposition can confound in vitro osteogenesis testing of CPS and therefore the expression of a variety of proteins or genes including collagen type I, bone sialoprotein and osteocalcin should be confirmed in addition to increased mineral content.

CONCLUSIONS

CPS are a superior scaffold material for bone regeneration because they actively promote osteogenesis. Biodegradability of CPS via calcium and phosphate release represents a unique asset. Structural control of CPS at the macro, micro and nanoscale and their combination with cells and polymeric materials is likely to lead to significant developments in bone tissue engineering.

Osteogenic potential of dualblocks cultured with human periodontal ligament stem cells: in vitro and synchrotron microtomography study

BACKGROUND AND OBJECTIVE

In the present study, the early stages of in vitro bone formation in collagenated porcine scaffolds cultured with human periodontal ligament cells were investigated. The comparison between the osteogenic potential of this structure in basal and differentiating culture media was explored to predict the mechanism of its biological behavior as graft in human defect. Results were validated by synchrotron radiation X-Ray phase contrast computed microtomography (micro-CT). As the periodontal disease plays a key role in systemic and oral diseases, it is crucial to find advanced therapeutic clinical interventions to repair periodontal defects. This has been recently explored using cells and tissues developed in vitro that should ideally be immunologically, functionally, structurally and mechanically identical to the native tissue.

MATERIAL AND METHODS

In vitro cultures of human periodontal ligament cells, easily obtained by scraping of alveolar crestal and horizontal fibers of the periodontal ligament, were seeded on to collagenated porcine blocks constituted by natural cancellous and cortical bone. 3D images were obtained by synchrotron radiation micro-CT and processed with a phase-retrieval algorithm based on the transport of intensity equation.

RESULTS

Starting from the second week of culture, newly formed mineralized bone was detected in all the scaffolds, both in basal and differentiating media. Bone mineralization was proved to occur preferentially in the trabecular portion and in differentiating media.

CONCLUSION

The chosen method, supported by phase contrast micro-CT analysis, successfully and quantitatively monitored the early stages of bone formation and the rate of the bioscaffold resorption in basal and differentiating culture media.

Structural basis for metallic-like conductivity in microbial nanowires

Direct measurement of multiple physical properties of Geobacter sulfurreducens pili have demonstrated that they possess metallic-like conductivity, but several studies have suggested that metallic-like conductivity is unlikely based on the structures of the G. sulfurreducens pilus predicted from homology models. In order to further evaluate this discrepancy, pili were examined with synchrotron X-ray microdiffraction and rocking-curve X-ray diffraction. Both techniques revealed a periodic 3.2-Å spacing in conductive, wild-type G. sulfurreducens pili that was missing in the nonconductive pili of strain Aro5, which lack key aromatic acids required for conductivity. The intensity of the 3.2-Å peak increased 100-fold when the pH was shifted from 10.5 to 2, corresponding with a previously reported 100-fold increase in pilus conductivity with this pH change. These results suggest a clear structure-function correlation for metallic-like conductivity that can be attributed to overlapping π-orbitals of aromatic amino acids. A homology model of the G. sulfurreducens pilus was constructed with a Pseudomonas aeruginosa pilus model as a template as an alternative to previous models, which were based on a Neisseria gonorrhoeae pilus structure. This alternative model predicted that aromatic amino acids in G. sulfurreducens pili are packed within 3 to 4 Å, consistent with the experimental results. Thus, the predictions of homology modeling are highly sensitive to assumptions inherent in the model construction. The experimental results reported here further support the concept that the pili of G. sulfurreducens represent a novel class of electronically functional proteins in which aromatic amino acids promote long-distance electron transport.

The mechanism for long-range electron transport along the conductive pili of Geobacter sulfurreducens is of interest because these “microbial nanowires” are important in biogeochemical cycling as well as applications in bioenergy and bioelectronics. Although proteins are typically insulators, G. sulfurreducens pilus proteins possess metallic-like conductivity. The studies reported here provide important structural insights into the mechanism of the metallic-like conductivity of G. sulfurreducens pili. This information is expected to be useful in the design of novel bioelectronic materials.

Strontium eluting graphene hybrid nanoparticles augment osteogenesis in a 3D tissue scaffold

The objective of this work was to prepare hybrid nanoparticles of graphene sheets decorated with strontium metallic nanoparticles and demonstrate their advantages in bone tissue engineering. Strontium-decorated reduced graphene oxide (RGO_Sr) hybrid nanoparticles were synthesized by the facile reduction of graphene oxide and strontium nitrate. X-ray diffraction, transmission electron microscopy, and atomic force microscopy revealed that the hybrid particles were composed of RGO sheets decorated with 200-300 nm metallic strontium particles. Thermal gravimetric analysis further confirmed the composition of the hybrid particles as 22 wt% of strontium. Macroporous tissue scaffolds were prepared by incorporating RGO_Sr particles in poly(ε-caprolactone) (PCL). The PCL/RGO_Sr scaffolds were found to elute strontium ions in aqueous medium. Osteoblast proliferation and differentiation was significantly higher in the PCL scaffolds containing the RGO_Sr particles in contrast to neat PCL and PCL/RGO scaffolds. The increased biological activity can be attributed to the release of strontium ions from the hybrid nanoparticles. This study demonstrates that composites prepared using hybrid nanoparticles that elute strontium ions can be used to prepare multifunctional scaffolds with good mechanical and osteoinductive properties. These findings have important implications for designing the next generation of biomaterials for use in tissue regeneration.

Physical properties and biocompatibility of UHMWPE-derived materials modified by synchrotron radiation

The applications of synchrotron radiation (SR) in medical imaging have become of great use, particularly in angiography, bronchography, mammography, computed tomography, and X-ray microscopy. Thanks to recently developed phase contrast imaging techniques non-destructive preclinical testing of low absorbing materials such as polymers has become possible. The focus of the present work is characterization and examination of UHMWPE-derived materials widely used in medicine, before and after their exposure to SR during such testing. Physical properties, such as wettability, surface energy, IR-spectroscopy, roughness, optical microscopy, microhardness measurements of UHMWPE samples were studied before and after SR. The relationship between a growth of UHMWPE surface hydrophilicity after SR and surface colonization by stromal cells was studied in vitro. Obtained results demonstrate that SR may be used as prospective direction to examine bulk (porous) structure of polymer materials and/or to modify polymer surface and volume for tissue engineering.

Zirconia enriched dental adhesive: a solution for OCT contrast enhancement. Demonstrative study by synchrotron radiation microtomography

OBJECTIVE

The major aim of this study was to prove the capability of the optical coherence tomography (OCT) method in visualizing the integrity of the adhesive fillings and of the interfaces between the adhesive, tooth structures and composite resin. As zirconium dioxide was added to the composition of the adhesive layer in order to strengthen the backscattered light in the OCT investigation, for a better visualization of the interfaces, the determination of a proper zirconia concentration was another aim of our study.

METHOD

Several class II cavities were prepared in human premolars and were filled with dental adhesive containing different zirconia concentrations and light-curing composite resin. Both OCT and synchrotron radiation microtomography (micro-CT) were used to analyse the morphology of the tooth-adhesive-composite interfaces and to investigate the adhesive layer.

RESULTS

The pore distribution, both at the interfaces level and in the resin, and the analysis of the adhesive layer integrity were obtained. A good agreement between OCT and micro-CT analyses was observed in terms of detecting discontinuities in the adhesive layer. Furthermore, micro-CT showed that zirconia percentages in the adhesive higher than 20 vol.% lead to conglomerates formation, which can negatively influence mechanical properties. Meanwhile, OCT confirmed a factor of 3 for the contrast enhancement when 20% of zirconia was included in the adhesive composition.

SIGNIFICANCE

The present study proved the capability of the OCT method in visualizing the morphology and integrity of zirconia doped tooth adhesive fillings, to be used for a further in vivo tool development.

Three-dimensional characterization of tissue-engineered constructs by contrast-enhanced nanofocus computed tomography

To successfully implement tissue-engineered (TE) constructs as part of a clinical therapy, it is necessary to develop quality control tools that will ensure accurate and consistent TE construct release specifications. Hence, advanced methods to monitor TE construct properties need to be further developed. In this study, we showed proof of concept for contrast-enhanced nanofocus computed tomography (CE-nano-CT) as a whole-construct imaging technique with a noninvasive potential that enables three-dimensional (3D) visualization and quantification of in vitro engineered extracellular matrix (ECM) in TE constructs. In particular, we performed a 3D qualitative and quantitative structural and spatial assessment of the in vitro engineered ECM, formed during static and perfusion bioreactor cell culture in 3D TE scaffolds, using two contrast agents, namely, Hexabrix® and phosphotungstic acid (PTA). To evaluate the potential of CE-nano-CT, a comparison was made to standardly used techniques such as Live/Dead viability/cytotoxicity, Picrosirius Red staining, and to net dry weight measurements of the TE constructs. When using Hexabrix as the contrast agent, the ECM volume fitted linearly with the net dry ECM weight independent from the flow rate used, thus suggesting that it stains most of the ECM. When using PTA as the contrast agent, comparing to net weight measurements showed that PTA only stains a part of the ECM. This was attributed to the binding specificity of this contrast agent. In addition, the PTA-stained CE-nano-CT data showed pronounced distinction between flow conditions when compared to Hexabrix, indicating culture-specific structural ECM differences. This novel type of information can contribute to optimize bioreactor culture conditions and potentially critical quality characteristics of TE constructs such as ECM quantity and homogeneity, facilitating the gradual transformation of TE constructs in well-characterized TE products.

In-vivo efficacy of compliant 3D nano-composite in critical-size bone defect repair: a six month preclinical study in rabbit

Bone defects above critical size do not heal completely by itself and thus represent major clinical challenge to reconstructive surgery. Numerous bone substitutes have already been used to promote bone regeneration, however their use, particularly for critical-sized bone defects along with their long term in vivo safety and efficacy remains a concern. The present study was designed to obtain a complete healing of critical-size defect made in the proximal tibia of New Zealand White rabbit, using nano-hydroxyapatite/gelatin and chemically carboxymethylated chitin (n-HA/gel/CMC) scaffold construct. The bone-implant interfaces and defect site healing was evaluated for a period up to 25 weeks using radiography, micro-computed tomography, fluorescence labeling, and histology and compared with respective SHAM (empty contra lateral control). The viscoelastic porous scaffold construct allows easy surgical insertion and post-operatively facilitate oxygenation and angiogenesis. Radiography of defect treated with scaffold construct suggested expedited healing at defect edges and within the defect site, unlike confined healing at edges of the SHAM sites. The architecture indices analyzed by micro-computed tomography showed a significant increase in percentage of bone volume fraction, resulted in reconciled cortico-trabecular bone formation at n-HA/gel/CMC constructs treated site (15.2% to 52.7%) when compared with respective SHAM (10.2% to 31.8%). Histological examination and fluorescence labeling revealed that the uniformly interconnected porous surface of scaffold construct enhanced osteoblasts' activity and mineralization. These preclinical data suggest that, n-HA/gel/CMC construct exhibit stimulation of bone's innate regenerative capacity, thus underscoring their use in guided bone regeneration.

Blind source separation and automatic tissue typing of microdiffraction data by hierarchical nonnegative matrix factorization

In this article a nonnegative blind source separation technique, known as nonnegative matrix factorization, is applied to microdiffraction data in order to extract characteristic patterns and to determine their spatial distribution in tissue typing problems occurring in bone-tissue engineering. In contrast to other blind source separation methods, nonnegative matrix factorization only requires nonnegative constraints on the extracted sources and corresponding weights, which makes it suitable for the analysis of data occurring in a variety of applications. In particular, here nonnegative matrix factorization is hierarchically applied to two-dimensional meshes of X-ray diffraction data measured in bone samples with implanted tissue. Such data are characterized by nonnegative profiles and their analysis provides significant information about the structure of possibly new deposited bone tissue. A simulation and real data studies show that the proposed method is able to retrieve the patterns of interest and to provide a reliable and accurate segmentation of the given X-ray diffraction data.

Polyglycolic acid-polylactic acid scaffold response to different progenitor cell in vitro cultures: a demonstrative and comparative X-ray synchrotron radiation phase-contrast microtomography study

Spatiotemporal interactions play important roles in tissue development and function, especially in stem cell-seeded bioscaffolds. Cells interact with the surface of bioscaffold polymers and influence material-driven control of cell differentiation. In vitro cultures of different human progenitor cells, that is, endothelial colony-forming cells (ECFCs) from a healthy control and a patient with Kaposi sarcoma (an angioproliferative disease) and human CD133+ muscle-derived stem cells (MSH 133+ cells), were seeded onto polyglycolic acid-polylactic acid scaffolds. Three-dimensional (3D) images were obtained by X-ray phase-contrast microtomography (micro-CT) and processed with the Modified Bronnikov Algorithm. The method enabled high spatial resolution detection of the 3D structural organization of cells on the bioscaffold and evaluation of the way and rate at which cells modified the construct at different time points from seeding. The different cell types displayed significant differences in the proliferation rate. In conclusion, X-ray synchrotron radiation phase-contrast micro-CT analysis proved to be a useful and sensitive tool to investigate the spatiotemporal pattern of progenitor cell organization on a bioscaffold.

Degree of biological apatite c-axis orientation rather than bone mineral density controls mechanical function in bone regenerated using recombinant bone morphogenetic protein-2

The aim of the present study was to assess the bone regeneration process in defects introduced into rabbit long bones, which were regenerated with controlled release of recombinant bone morphogenetic protein-2 (rBMP-2). The orientation of the biological apatite (BAp) c-axis and bone mineral density (BMD) were compared as predictors of bone mechanical function. A 20-mm-long defect was introduced in rabbit ulnas, and 17 µg of rBMP-2 was controlled-released into the defect using a biodegradable gelatin hydrogel as the carrier. In the bone regeneration process, two characteristic phases may have been governed by different factors. First, new bone formation actively occurred, filling the bone defect with newly formed bone tissue and increasing the BMD. This process was regulated by the strong osteoinductive capacity of rBMP-2. Second, after filling of the defect and moderate BMD restoration, preferential BAp c-axis orientation began to increase, coincident with initiation of remodeling. In addition, the BAp c-axis orientation, rather than BMD, was strongly correlated with Young's modulus, an important index of bone mechanical function, particularly in the later stage of bone regeneration. Thus, preferential BAp c-axis orientation is a strong determinant and predictor of the mechanical function of tissue-engineered bone. Therefore, analysis of BAp preferential c-axis orientation in addition to measurement of BMD is crucial in assessment of bone mechanical function.

Three years after transplants in human mandibles, histological and in-line holotomography revealed that stem cells regenerated a compact rather than a spongy bone: biological and clinical implications

Mesenchymal stem cells deriving from dental pulp differentiate into osteoblasts capable of producing bone. In previous studies, we extensively demonstrated that, when seeded on collagen I scaffolds, these cells can be conveniently used for the repair of human mandible defects. Here, we assess the stability and quality of the regenerated bone and vessel network 3 years after the grafting intervention, with conventional procedures and in-line holotomography, an advanced phase-imaging method using synchrotron radiation that offers improved sensitivity toward low-absorbing structures. We found that the regenerated tissue from the graft sites was composed of a fully compact bone with a higher matrix density than control human alveolar spongy bone from the same patient. Thus, the regenerated bone, being entirely compact, is completely different from normal alveolar bone. Although the bone regenerated at the graft sites is not of the proper type found in the mandible, it does seem to have a positive clinical impact. In fact, it creates steadier mandibles, may well increase implant stability, and, additionally, may improve resistance to mechanical, physical, chemical, and pharmacological agents.

In vivo regenerative properties of coralline-derived (biocoral) scaffold grafts in human maxillary defects: demonstrative and comparative study with Beta-tricalcium phosphate and biphasic calcium phosphate by synchrotron radiation x-ray microtomography

BACKGROUND

In recent years, there has been interest on the fabrication of systems using particulates or block-based approach for bone tissue engineering (TE) scaffolds, possessing porous interconnected structures. In fact, these particular morphologies greatly increase the surface area for more chemical and biological reactions to take place.

PURPOSE

This study was designed to demonstrate the unique capability of the synchrotron radiation x-ray microtomography (micro-CT) in offering an advanced characterization of coralline-derived (Biocoral) biomaterials placed in human maxillary defects as it allows, in a nondestructive way, a complete, precise, and high-resolution three-dimensional analysis of their microstructural parameters. Moreover, the comparison between Biocoral and other biomaterials was explored to understand the mechanism of their biological behavior as bone substitute.

MATERIALS AND METHODS

Implant survival, bone regeneration, graft resorption, neovascularization, and morphometric parameters (including anisotropy and connectivity index of the structures) were evaluated by micro-CT in Biocoral and the other biomaterials after 6 to 7 months from implantation in human maxillary bone defects.

RESULTS

After the in vivo tests, a huge amount of bone was detected in the retrieved Biocoral-based samples, coupled with a good rate of biomaterial resorption and the formation of a homogeneous and rich net of new vessels. The morphometric parameters were comparable to those obtained in the biphasic calcium phosphate-based control, with the exception of the connectivity index for which this control exhibited the most well-connected structure. This last result, together with those referred to the poor performances of the β-tricalcium phosphate block-based sample, suggests that the particular scaffold morphology may play a role in the hunt the optimal scaffold structure to be implanted.

CONCLUSION

In this limited study, implant success rate seems not strictly dependent on the biomaterial that is used, but on the scaffold morphology. Micro-CT technique was demonstrated to play a fundamental role in advanced characterization of bone TE constructs.

Extracellular matrix deposition and scaffold biodegradation in an in vitro three-dimensional model of bone by X-ray computed microtomography

The development of an in vitro model of bone and the optimization of tools for determining the biological processes occurring during bone repair remains a major goal in the field of bone tissue engineering. Recently, a model based on a three-dimensional co-culture of osteoblasts and osteoclast precursors in Skelite(TM) scaffolds was developed. Although induction of osteoblast and osteoclast differentiation was observed, a complete evaluation of bone deposition and biodegradation processes was missing due to technical limitations. In the current study, both X-ray computed microtomography and histological analysis were used to monitor these two key biological processes in the same in vitro model. Either osteoblasts or a combination of osteoblasts and osteoclasts were seeded on Skelite(TM) scaffolds. Scaffold biodegradation and increased bone deposition together with a more organized extracellular matrix were observed in the co-cultures, highlighting the role of osteoclasts in the determination and regulation of bone deposition. Results confirmed the potential and relevance of co-culturing osteoblasts and osteoclasts to resemble native tissue. The combination of X-ray computed microtomography and histology presented in this study could be useful in future studies for the validation and development of new in vitro culture systems for bone tissue engineering.

Introducing a novel analysis technique for osseointegrated dental implants retrieved 29 years postsurgery

PURPOSE

To investigate osseointegration of oral implants, which were retrieved from a patient after 29 years in situ, we use novel three-dimensional analysis methods and visualization techniques that supplement conventional two-dimensional analysis.

MATERIALS AND METHODS

The sample processing involved nondecalcification and embedment in resin. Conventional two-dimensional histomorphometrical methods were conducted. Additionally, the quantification was extended to three-dimensional by using synchrotron radiation micro-computed tomography (SRµCT) technique and two relevant visualization methods for the three-dimensional data were introduced.

RESULTS

The three-dimensional results involved three-dimensional quantification and visualization of two implant samples with methods beyond state-of-the-art. Traditional two-dimensional histomorphometrical results revealed a mean bone-implant contact (BIC) of about 50%. In most samples, bone area (BA) was lower inside the treads compared with out-folded mirror images, which were confirmed by the three-dimensional quantification. The BIC along four selected regions showed highest percentages in the bottom/valley region and lowest in the thread-peak region. Qualitative observations revealed ongoing bone remodeling areas in all samples. The apical hole demonstrated high osseointegration.

CONCLUSION

The novel techniques including an animation and an out-folding of BIC and BA enabled a simultaneous visualization of the three-dimensional material obtained from SRµCT data. However, the two-dimensional histological sections were needed for qualitative and quantitative evaluation of osseointegration and, thus, both methods are considered equally important.

X-ray microtomography in biology

Progress in high-resolution X-ray microtomography has provided us with a practical approach to determining three-dimensional (3D) structures of opaque samples at micrometer to submicrometer resolution. In this review, we give an introduction to hard X-ray microtomography and its application to the visualization of 3D structures of biological soft tissues. Practical aspects of sample preparation, handling, data collection, 3D reconstruction, and structure analysis are described. Furthermore, different sample contrasting methods are approached in detail. Examples of microtomographic studies are overviewed to present an outline of biological applications of X-ray microtomography. We also provide perspectives of biological microtomography as the convergence of sciences in X-ray optics, biology, and structural analysis.

Potential for imaging engineered tissues with X-ray phase contrast

As the field of tissue engineering advances, it is crucial to develop imaging methods capable of providing detailed three-dimensional information on tissue structure. X-ray imaging techniques based on phase-contrast (PC) have great potential for a number of biomedical applications due to their ability to provide information about soft tissue structure without exogenous contrast agents. X-ray PC techniques retain the excellent spatial resolution, tissue penetration, and calcified tissue contrast of conventional X-ray techniques while providing drastically improved imaging of soft tissue and biomaterials. This suggests that X-ray PC techniques are very promising for evaluation of engineered tissues. In this review, four different implementations of X-ray PC imaging are described and applications to tissues of relevance to tissue engineering reviewed. In addition, recent applications of X-ray PC to the evaluation of biomaterial scaffolds and engineered tissues are presented and areas for further development and application of these techniques are discussed. Imaging techniques based on X-ray PC have significant potential for improving our ability to image and characterize engineered tissues, and their continued development and optimization could have significant impact on the field of tissue engineering.

Three-dimensional visualization of bioactive glass-bone integration in a rabbit tibia model using synchrotron X-ray microcomputed tomography

Synchrotron X-ray microcomputed tomography (SR microCT), with a micron resolution, was used to evaluate the osteoconduction and osteointegration by borate bioactive glass after implantation 12 weeks in a rabbit tibia model. The study focused on the biomaterial-bone interface. Results from SR microCT two-dimensional and three-dimensional (3D) reconstructions provided precise imaging of the biomaterial-bone integration and detailed microarchitecture of both the bone-like glass graft and the newly formed trabecular bone. Osteoconduction, the formation of new trabecular bone within a tibia defect, occurred only in the tibiae implanted with teicoplanin-loaded borate glass but not in those with teicoplanin-loaded CaSO(4) beads, indicating the excellent biocompatibility of the glass implants. 3D reconstruction of the tibiae also showed the infiltration of vascular tissue in both the bioactive glass graft and the new trabecular bone. This study indicates that SR microCT can serve as a valuable complementary technique for imaging bone repair when using bioactive glass implants.

Evaluation of bone scaffolds by micro-CT

This paper reviews the possibilities offered by X-ray micro-CT in bone tissue engineering. This technique provides a fast, nondestructive, and 3D quantification of bone scaffolds, bone ingrowth, and microvascularization. Synchrotron radiation absorption and phase micro-CT offer additional advantages to image newly formed bone in bioceramic scaffolds and pre-bone matrix.

Toward the x-ray microdiffraction imaging of bone and tissue-engineered bone

The hierarchical structure of bone makes the X-ray microdiffraction scanning techniques one of the most effective tool to investigate the structural features of this tissue at different length scales: the atomic/nanometer scale of the X-ray scattering signals and the macroscopic scale of the scanned sample area. The potentiality of the microdiffraction approach has been verified also by investigations on tissue-engineered bone substitutes used to repair large hard bone defects. The aim of this review is to present the most representative and recent results obtained through high-resolution scanning microdiffraction techniques studying both natural and tissue-engineered bone. The rapid evolution of the instrumental set-ups and the advanced methods of data analysis are described. Recent examples in which X-ray microbeams were used for imaging quantitative features of natural bone tissue and engineered bone substitutes are presented along with the qualitative and quantitative information extracted from the two-dimensional patterns collected on bone samples and on ex vivo cell seeded bioceramic implants. Thanks to the microdiffraction approach, several aspects of the mechanisms leading to the generation of the new bone, coupled to the scaffold resorption in the tissue-engineered constructs, have been tentatively interpreted. The potential of X-ray microdiffraction as an imaging tool in the field of bone tissue engineering is discussed and the key role of high-spatial resolution, availability of automatic tools (for dealing with the huge amount of experimental data) and advanced analysis techniques is elucidated. Finally, future perspectives in the field are presented.

The role of disc-type crystal shape for micromechanical predictions of elasticity and strength of hydroxyapatite biomaterials

The successful design of ceramic bone biomaterials is challenged by two competing requirements: on the one hand, such materials need to be stiff and strong, which would suggest a low porosity (of pore sizes in the 10-100 microm range) to be targeted; on the other hand, bone biomaterials need to be bioactive (in particular vascularized), which suggests a high porosity of such materials. Conclusively, reliable information on how porosity drives the stiffness and strength properties of ceramic bone biomaterials (tissue engineering scaffolds) is of great interest. In this context, mathematical models are increasingly being introduced into the field. Recently, self-consistent continuum micromechanics formulations have turned out as expressedly efficient and reliable tools to predict hydroxyapatite biomaterials' stiffness and strength, as a function of the biomaterial-specific porosity, and of the 'universal' properties of the individual hydroxyapatite crystals: their stiffness, strength and shape. However, the precise crystal shape can be suitably approximated by specific ellipsoidal shapes: while it was shown earlier that spherical shapes do not lead to satisfactory results, and that acicular shapes are an appropriate choice, we here concentrate on disc-type crystal shape as, besides needles, plates are often reported in micrographs of hydroxyapatite biomaterials. Disc-based model predictions of a substantial set of experimental data on stiffness and strength of hydroxyapatite biomaterials almost attain the quality of the very satisfactory needle-based models. This suggests that, as long as the crystal shape is clearly non-spherical, its precise shape is of secondary importance if stiffness and strength of hydroxyapatite biomaterials are predicted on the basis of continuum micromechanics, from their micromorphology and porosity.

Stem cell tracking by nanotechnologies

Advances in stem cell research have provided important understanding of the cell biology and offered great promise for developing new strategies for tissue regeneration. The beneficial effects of stem cell therapy depend also by the development of new approachs for the track of stem cells in living subjects over time after transplantation. Recent developments in the use of nanotechnologies have contributed to advance of the high-resolution in vivo imaging methods, including positron emission tomography (PET), single-photon emission tomography (SPECT), magnetic resonance (MR) imaging, and X-Ray computed microtomography (microCT). This review examines the use of nanotechnologies for stem cell tracking.

Particle seeding enhances interconnectivity in polymeric scaffolds foamed using supercritical CO(2)

Foaming using supercritical CO(2) is a well-known process for the production of polymeric scaffolds for tissue engineering. However, this method typically leads to scaffolds with low pore interconnectivity, resulting in insufficient mass transport and a heterogeneous distribution of cells. In this study, microparticulate silica was added to the polymer during processing and the effects of this particulate seeding on the interconnectivity of the pore structure and pore size distribution were investigated. Scaffolds comprising polylactide and a range of silica contents (0-50 wt.%) were produced by foaming with supercritical CO(2). Scaffold structure, pore size distributions and interconnectivity were assessed using X-ray computed microtomography. Interconnectivity was also determined through physical measurements. It was found that incorporation of increasing quantities of silica particles increased the interconnectivity of the scaffold pore structure. The pore size distribution was also reduced through the addition of silica, while total porosity was found to be largely independent of silica content. Physical measurements and those derived from X-ray computed microtomography were comparable. The conclusion drawn was that the architecture of foamed polymeric scaffolds can be advantageously manipulated through the incorporation of silica microparticles. The findings of this study further establish supercritical fluid foaming as an important tool in scaffold production and show how a previous limitation can be overcome.