Avidin–biotin binding-based cell seeding and perfusion culture of liver-derived cells in a porous scaffold with a three-dimensional interconnected flow-channel network

Development and characterization of Polycaprolactone/chitosan-based scaffolds for tissue engineering of various organs: A review

Research in creating 3D structures mirroring the extracellular matrix (ECM) with accurate environmental cues holds paramount significance in biological applications.Biomaterials that replicate ECM properties-mechanical, physicochemical, and biological-emerge as pivotal tools in mimicking ECM behavior.Incorporating synthetic and natural biomaterials is widely used to produce scaffolds suitable for the intended organs.Polycaprolactone (PCL), a synthetic biomaterial, boasts commendable mechanical properties, albeit with relatively modest biological attributes due to its hydrophobic nature.Chitosan (CTS) exhibits strong biological traits but lacks mechanical resilience for complex tissue regeneration.Notably, both PCL and CTS have demonstrated their application in tissue engineering for diverse types of tissues.Their combination across varying PCL:CTS ratios has increased the likelihood of fabricating scaffolds to address defects in sturdy and pliable tissues.This comprehensive analysis aspires to accentuate their distinct attributes within tissue engineering across different organs.The central focus resides in the role of PCL:CTS-based scaffolds, elucidating their contribution to the evolution of advanced functional 3D frameworks tailored for tissue engineering across diverse organs.Moreover, this discourse delves into the considerations pertinent to each organ.

A review on the application of chitosan-based polymers in liver tissue engineering

Chitosan-based polymers have enormous structural tendencies to build bioactive materials with novel characteristics, functions, and various applications, mainly in liver tissue engineering (LTE). The specific physicochemical, biological, mechanical, and biodegradation properties give the effective ways to blend these biopolymers with synthetic and natural polymers to fabricate scaffolds matrixes, sponges, and complexes. A variety of natural and synthetic biomaterials, including chitosan (CS), alginate (Alg), collagen (CN), gelatin (GL), hyaluronic acid (HA), hydroxyapatite (HAp), polyethylene glycol (PEG), polycaprolactone (PCL), poly(lactic-co-glycolic) acid (PGLA), polylactic acid (PLA), and silk fibroin gained considerable attention due to their structure-properties relationship. The incorporation of CS within the polymer matrix results in increased mechanical strength and also imparts biological behavior to the designed PU formulations. The significant and growing interest in the LTE sector, this review aims to be a detailed exploration of CS-based polymers biomaterials for LTE. A brief explanation of the sources and extraction, properties, structure, and scope of CS is described in the introduction. After that, a full overview of the liver, its anatomy, issues, hepatocyte transplantation, LTE, and CS LTE applications are discussed.

Advancing bovine in vitro fertilization through 3D printing: the effect of the 3D printed materials

Nowadays there is an increasing demand for assisted reproductive technologies due to the growth of infertility problems. Naturally, fertilization occurs in the oviduct, where the oviductal epithelial cells (OECs) secrete many molecules that affect the embryo's metabolism and protect it from oxidative stress. When the OECs are grown in 3D culture systems, they maintain a great part of their functional characteristics, making them an excellent model for in vitro fertilization (IVF) studies. In this work, we aimed to evaluate the suitability of different 3D-printing processes in conjunction with the corresponding set of commercially available biomaterials: extrusion-based processing using polylactic acid (PLA) and polycaprolactone (PCL) and stereolithography or digital-light processing using polyethylene-glycol-diacrylate (PEGDA) with different stiffness (PEGDA500, PEGDA200, PEGDA PhotoInk). All the 3D-printed scaffolds were used to support IVF process in a bovine embryo assay. Following fertilization, embryo development and quality were assessed in terms of cleavage, blastocyst rate at days 7 and 8, total cell number (TCN), inner cell mass/trophectoderm ratio (ICN/TE), and apoptotic cell ratio (ACR). We found a detrimental effect on cleavage and blastocyst rates when the IVF was performed on any medium conditioned by most of the materials available for digital-light processing (PEGDA200, PEGDA500). The observed negative effect could be possibly due to some leaked compound used to print and stabilize the scaffolds, which was not so evident however with PEGDA PhotoInk. On the other hand, all the extrusion-based processable materials did not cause any detrimental effect on cleavage or blastocyst rates. The principal component analysis reveals that embryos produced in presence of 3D-printed scaffolds produced via extrusion exhibit the highest similarity with the control embryos considering cleavage, blastocyst rates, TCN, ICN/TE and ACR per embryo. Conversely, all the photo-cross linkable materials or medium conditioned by PLA, lead to the highest dissimilarities. Since the use of PCL scaffolds, as well as its conditioned medium, bring to embryos that are more similar to the control group. Our results suggest that extrusion-based 3D printing of PCL could be the best option to be used for new IVF devices, possibly including the support of OECs, to enhance bovine embryo development.

Antibody-conjugated nanoparticles for target-specific drug delivery of chemotherapeutics

Nanotechnology provides effective methods for precisely delivering chemotherapeutics to cancer cells, thereby improving efficacy and reducing off-target side effects. The targeted delivery of nanoscale chemotherapeutics is accomplished by two different approaches, namely the exploitation of leaky tumor vasculature (EPR effect) and the surface modification of nanoparticles (NPs) with various tumor-homing peptides, aptamers, oligonucleotides, and monoclonal antibodies (mAbs). Because of higher binding affinity and specificity, mAbs have received a lot of attention for the detection of selective cancer biomarkers and also for the treatment of various types of cancer. Antibody-conjugated nanoparticles (ACNPs) are an effective targeted therapy for the efficient delivery of chemotherapeutics specifically to the targeted cancer cells. ACNPs combine the benefits of NPs and mAbs to provide high drug loads at the tumor site with better selectivity and delivery efficiency. The mAbs on the NP surfaces recognize their specific receptors expressed on the target cells and release the chemotherapeutic agent in a controlled manner. Appropriately designed and synthesized ACNPs are essential to fully realize their therapeutic benefits. In blood stream, ACNPs instantly interact with biological molecules, and a protein corona is formed. Protein corona formation triggers an immune response and affects the targeting ability of the nanoformulation. In this review, we provide recent findings to highlight several antibody conjugation methods such as adsorption, covalent conjugation, and biotin-avidin interaction. This review also provides an overview of the many effects of the protein corona and the theranostic applications of ACNPs for the treatment of cancer.

Effect of Hydroxyapatite Coating by Er: YAG Pulsed Laser Deposition on the Bone Formation Efficacy by Polycaprolactone Porous Scaffold

Composite scaffolds obtained by the combination of biodegradable porous scaffolds and hydroxyapatite with bone regeneration potential are feasible materials for bone tissue engineering. However, most composite scaffolds have been fabricated by complicated procedures or under thermally harsh conditions. We have previously demonstrated that hydroxyapatite coating onto various substrates under a thermally mild condition was achieved by erbium-doped yttrium aluminum garnet (Er: YAG) pulsed laser deposition (PLD). The purpose of this study was to prepare a polycaprolactone (PCL) porous scaffold coated with the hydroxyapatite by the Er: YAG-PLD method. Hydroxyapatite coating by the Er: YAG-PLD method was confirmed by morphology, crystallographic analysis, and surface chemical characterization studies. When cultured on PCL porous scaffold coated with hydroxyapatite, rat bone marrow-derived mesenchymal stem cells adhered, spread, and proliferated well. The micro-CT and staining analyses after the implantation of scaffold into the critical-sized calvaria bone defect in rats indicate that PCL porous scaffold coated with hydroxyapatite demonstrates accelerated and widespread bone formation. In conclusion, PCL porous scaffold coated with hydroxyapatite obtained by the Er: YAG-PLD method is a promising material in bone tissue engineering.

When Electrospun Fiber Support Matters: In Vitro Ovine Long-Term Folliculogenesis on Poly (Epsilon Caprolactone) (PCL)-Patterned Fibers

Current assisted reproduction technologies (ART) are insufficient to cover the slice of the population needing to restore fertility, as well as to amplify the reproductive performance of domestic animals or endangered species. The design of dedicated reproductive scaffolds has opened the possibility to better recapitulate the reproductive 3D ovarian environment, thus potentially innovating in vitro folliculogenesis (ivF) techniques. To this aim, the present research has been designed to compare ovine preantral follicles in vitro culture on poly(epsilon-caprolactone) (PCL)-based electrospun scaffolds designed with different topology (Random vs. Patterned fibers) with a previously validated system. The ivF performances were assessed after 14 days under 3D-oil, Two-Step (7 days in 3D-oil and on scaffold), or One-Step PCL protocols (14 days on PCL-scaffold) by assessing morphological and functional outcomes. The results show that Two- and One-Step PCL ivF protocols, when performed on patterned scaffolds, were both able to support follicle growth, antrum formation, and the upregulation of follicle marker genes leading to a greater oocyte meiotic competence than in the 3D-oil system. In conclusion, the One-Step approach could be proposed as a practical and valid strategy to support a synergic follicle-oocyte in vitro development, providing an innovative tool to enhance the availability of matured gametes on an individual basis for ART purposes.

Dual-core coaxial bioprinting of double-channel constructs with a potential for perfusion and interaction of cells

Coaxial bioprinting of hydrogel tubes has tremendous potential in the fabrication of highly complex large-scale vascularized structures, however, constructs with bioinks of simultaneous weak printability and perfusable networks have not been reported. Here, we report a coaxial printing method in which double-channel filaments are three-dimensional (3D) extrusion-bioprinted using a customized dual-core coaxial nozzle. The filament in one channel can perform core/shell role and the other channel can play a role in perfusion. These parallel channels within filaments are separated by an interval wall of alginate, whose thickness (∼50μm) is beneficial to supplement nutrients via perfusion. Different cell-laden hydrogels of weak mechanics were used to test the adaptability and perfusability of our method, and the results showed that dynamic perfusion maintained higher viability and functions than static culture. By combining with a bioprinter, 8-layer perfusable double-channel constructs were fabricated, and the cell viabilities gradually decreased with the reduction in nutrients and oxygen in the downstream medium. Furthermore, the double-channel filaments were tested as a platform to mimic dynamic functions between cells through sequential perfusion by using Mouse insulinoma 6 (Min6) and Hepatocellular carcinoma (HepG2) as the model cells. These results demonstrated the insulin secreted by Min6 upstream simulated and increased the uptake of glucose by the downstream HepG2 cells. In conclusion, our study provided evidence for the probability of all-in-one fabrication of 3D double-channel perfusable constructs with high simplicity, expansibility, and versability. Our strategy has significant potential for building large-scale tissue constructs for applications in tissue engineering, possibly even in drug screening and regenerative medicine.

Nature-Derived and Synthetic Additives to poly(ɛ-Caprolactone) Nanofibrous Systems for Biomedicine; an Updated Overview

As a low cost, biocompatible, and bioresorbable synthetic polymer, poly (ɛ-caprolactone) (PCL) is widely used for different biomedical applications including drug delivery, wound dressing, and tissue engineering. An extensive range of in vitro and in vivo tests has proven the favourable applicability of PCL in biomedicine, bringing about the FDA approval for a plethora of PCL made medical or drug delivery systems. This popular polymer, widely researched since the 1970s, can be readily processed through various techniques such as 3D printing and electrospinning to create biomimetic and customized medical products. However, low mechanical strength, insufficient number of cellular recognition sites, poor bioactivity, and hydrophobicity are main shortcomings of PCL limiting its broader use for biomedical applications. To maintain and benefit from the high potential of PCL, yet addressing its physicochemical and biological challenges, blending with nature-derived (bio)polymers and incorporation of nanofillers have been extensively investigated. Here, we discuss novel additives that have been meant for enhancement of PCL nanofiber properties and thus for further extension of the PCL nanofiber application domain. The most recent researches (since 2017) have been covered and an updated overview about hybrid PCL nanofibers is presented with focus on those including nature-derived additives, e.g., polysaccharides and proteins, and synthetic additives, e.g., inorganic and carbon nanomaterials.

Carbon Capture Utilization for Biopolymer Foam Manufacture: Thermal, Mechanical and Acoustic Performance of PCL/PHBV CO2 Foams

Biopolymer foams manufactured using CO₂ enables a novel intersection for economic, environmental, and ecological impact but limited CO₂ solubility remains a challenge. PHBV has low solubility in CO₂ while PCL has high CO₂ solubility. In this paper, PCL is used to blend into PBHV. Both unfoamed and foamed blends are examined. Foaming the binary blends at two depressurization stages with subcritical CO₂ as the blowing agent, produced open-cell and closed-cell foams with varying cellular architecture at different PHBV concentrations. Differential Scanning Calorimetry results showed that PHBV had some solubility in PCL and foams developed a PCL rich, PHBV rich and mixed phase. Scanning Electron Microscopy and pcynometry established cell size and density which reflected benefits of PCL presence. Acoustic performance showed limited benefits from foaming but mechanical performance of foams showed a significant impact from PHBV presence in PCL. Thermal performance reflected that foams were affected by the blend thermal conductivity, but the impact was significantly higher in the foams than in the unfoamed blends. The results provide a pathway to multifunctional performance in foams of high performance biopolymers such as PBHV through harnessing the CO₂ miscibility of PCL.

Fabrication of a Porous Three-Dimensional Scaffold with Interconnected Flow Channels: Co-Cultured Liver Cells and In Vitro Hemocompatibility Assessment

The development of large-scale human liver scaffolds equipped with interconnected flow channels in three-dimensional space offers a promising strategy for the advancement of liver tissue engineering. Tissue-engineered scaffold must be blood-compatible to address the demand for clinical transplantable liver tissue. Here, we demonstrate the construction of 3-D macro scaffold with interconnected flow channels using the selective laser sintering (SLS) fabrication method. The accuracy of the printed flow channels was ensured by the incorporation of polyglycolic acid (PGA) microparticles as porogens over the conventional method of NaCl salt leaching. The fabricated scaffold was populated with Hep G2, followed by endothelization with endothelial cells (ECs) grown under perfusion of culture medium for up to 10 days. The EC covered scaffold was perfused with platelet-rich plasma for the assessment of hemocompatibility to examine its antiplatelet adhesion properties. Both Hep G2-covered scaffolds exhibited a markedly different albumin production, glucose metabolism and lactate production when compared to EC-Hep G2-covered scaffold. Most importantly, EC-Hep G2-covered scaffold retained the antiplatelet adhesion property associated with the perfusion of platelet-rich plasma through the construct. These results show the potential of fabricating a 3-D scaffold with interconnected flow channels, enabling the perfusion of whole blood and circumventing the limitation of blood compatibility for engineering transplantable liver tissue.

Bone formation potential of collagen type I-based recombinant peptide particles in rat calvaria defects

Introduction

This study aimed to examine the bone-forming ability of medium-cross-linked recombinant collagen peptide (mRCP) particles developedbased on human collagen type I, contains an arginyl-glycyl-aspartic acid-rich motif, fabricated as bone filling material, compared to that of the autologous bone graft.

Methods

Calvarial bone defects were created in immunodeficient rats though a surgical procedure. The rats were divided into 2 groups: mRCP graft and tibia bone graft (bone graft). The bone formation potential of mRCP was evaluated by micro-computed tomography and hematoxylin-eosin staining at 1, 2, 3, and 4 weeks after surgery, and the data were analyzed and compared to those of the bone graft.

Results

The axial volume-rendered images demonstrated considerable bony bridging with the mRCP graft, but there was no significant difference in the bone volume and bone mineral density between the mRCP graft and bone graft at 4 weeks. The peripheral new bone density was significantly higher than the central new bone density and the bottom side score was significantly higher than the top side score at early stage in the regenerated bone within the bone defects.

Conclusion

These results indicate that mRCP has a high potential of recruiting osteogenic cells, comparable to that of autologous bone chips.

•

Bone formation potential of mRCP were comparable to that of autogenous bone.

•

mRCP particles exhibit high new bone formation potential in the calvaria defect.

•

Bone bridging was observed over the entire defect in mRCP graft at 4 weeks.

•

mRCP has a high potential of recruiting osteogenic cells comparable to bone graft.

An Overview of Antibody Conjugated Polymeric Nanoparticles for Breast Cancer Therapy

Nanoparticles (NPs) are promising drug delivery systems (DDS) for identifying and treating cancer. Active targeting NPs can be generated by conjugation with ligands that bind overexpressed or mutant cell surface receptors on target cells that are poorly or not even expressed on normal cells. Receptor-mediated endocytosis of the NPs occurs and the drug is released inside the cell or in the surrounding tissue due to the bystander effect. Antibodies are the most frequently used ligands to actively target tumor cells. In this context, antibody-based therapies have been extensively used in HER2+ breast cancer. However, some patients inherently display resistance and in advanced stages, almost all eventually progress. Functionalized NPs through conjugation with antibodies appear to be a promising strategy to optimize targeted therapies due to properties related to biocompatibility, suitable delivery control and efficiency of functionalization. This review is focused on the different strategies to conjugate antibodies into polymeric NPs. Recent antibody conjugation approaches applied to the improvement of breast cancer therapy are highlighted in this review.

Novel Self-Assembled Polycaprolactone-Lipid Hybrid Nanoparticles Enhance the Antibacterial Activity of Ciprofloxacin

Ciprofloxacin (CIP), a widely used antibiotic, is a poor biopharmaceutical resulting in low bioavailability. We optimized a CIP polymer-lipid hybrid nanoparticle (CIP-PLN) delivery system to enhance its biopharmaceutical attributes and the overall therapeutic performance. CIP-PLN formulations were prepared by a direct emulsification-solvent-evaporation method. Varying the type and ratio of lipid was tried to optimize a CIP-PLN formulation. All the prepared formulations were evaluated for their particle size, polydispersity index, zeta potential, physical stability, and drug entrapment efficiency. The drug in vitro release profile was also studied. Antibacterial activities were tested by the agar diffusion method for all CIP-PLN formulations against an Escherichia coli clinical bacterial isolate (EC04). CIP-PLN formulations showed average sizes in the range of 133.9 ± 1.7 nm to 217.1 ± 0.8 nm, exhibiting high size uniformity as indicated by polydispersity indices lower than 0.25. The entrapment efficiency was close to 80% for all formulations. The differential scanning calorimetry (DSC) thermograms indicated the existence of CIP in the amorphous state in all PLN formulations. Fourier transform infrared spectra indicated deep incorporation of molecular CIP within the polymer matrix. The release profile of CIP from PLN formulas showed a uniform prolonged drug profile, extended for a week from most formulations with a zero-order kinetics. The antibacterial activity of CIP-PLN formulations showed significantly higher antibacterial activity only with F4 containing lecithin as the lipid component. In conclusion, we successfully optimized a CIP-PLN formulation with a low nanoparticle size in a close range, high percentage of entrapment efficiency and drug loading, uniform prolonged release rate, and higher antibacterial activity against the EC04 clinical isolate.

Optimized Polyethylene Glycolylated Polymer-Lipid Hybrid Nanoparticles as a Potential Breast Cancer Treatment

Purpose: The aim of this work is to optimize a polyethylene glycolated (PEGylated) polymer–lipid hybrid nanoparticulate system for the delivery of anastrozole (ANS) to enhance its biopharmaceutical attributes and overall efficacy. Methods: ANS loaded PEGylated polymer–lipid hybrid nanoparticles (PLNPs) were prepared by a direct emulsification solvent evaporation method. The physical incorporation of PEG was optimized using variable ratios. The produced particles were evaluated to discern their particle size and shape, zeta-potential, entrapment efficiency, and physical stability. The drug-release profiles were studied, and the kinetic model was analyzed. The anticancer activity of the ANS PLNPs on estrogen-positive breast cancer cell lines was determined using flow cytometry. Results: The prepared ANS-PLNPs showed particle sizes in the range of 193.6 ± 2.9 to 218.2 ± 1.9 nm, with good particle size uniformity (i.e., poly-dispersity index of around 0.1). Furthermore, they exhibited relatively low zeta-potential values ranging from −0.50 ± 0.52 to 6.01 ± 4.74. The transmission electron microscopy images showed spherical shape of ANS-PLNPs and the compliance with the sizes were revealed by light scattering. The differential scanning calorimetry DSC patterns of the ANS PLNPs revealed a disappearance of the characteristic sharp melting peak of pure ANS, supporting the incorporation of the drug into the polymeric matrices of the nanoparticles. Flow cytometry showed the apoptosis of MCF-7 cell lines in the presence of ANS-PLNPs. Conclusion: PEGylated polymeric nanoparticles presented a stable encapsulated system with which to incorporate an anticancer drug (ANS) with a high percentage of entrapment efficiency (around 80%), good size uniformity, and induction of apoptosis in MCF-7 cells.

Functionalizing nanoparticles with cancer-targeting antibodies: A comparison of strategies

Standard cancer therapies sometimes fail to deliver chemotherapeutic drugs to tumor cells in a safe and effective manner. Nanotechnology takes the lead in providing new therapeutic options for cancer due to major potential for selective targeting and controlled drug release. Antibodies and antibody fragments are attracting much attention as a source of targeting ligands to bind specific receptors that are overexpressed on cancer cells. Therefore, researchers are devoting time and effort to develop targeting strategies based on nanoparticles functionalized with antibodies, which hold great promise to enhance therapeutic efficacy and circumvent severe side effects. Several methods have been described to immobilize antibodies on the surface of nanoparticles. However, selecting the most appropriate for each application is challenging but also imperative to preserve antigen binding ability and yield stable antibody-conjugated nanoparticles. From this perspective, we aim to provide considerable knowledge on the most widely used methods of functionalization that can be helpful for decision-making and design of conjugation protocols as well. This review summarizes adsorption, covalent conjugation (carbodiimide, maleimide and "click" chemistries) and biotin-avidin interaction, while discussing the advantages, limitations and relevant therapeutic approaches currently under investigation.

Vascularization and biocompatibility of poly(ε-caprolactone) fiber mats for rotator cuff tear repair

Rotator cuff tear is the most frequent tendon injury in the adult population. Despite current improvements in surgical techniques and the development of grafts, failure rates following tendon reconstruction remain high. New therapies, which aim to restore the topology and functionality of the interface between muscle, tendon and bone, are essentially required. One of the key factors for a successful incorporation of tissue engineered constructs is a rapid ingrowth of cells and tissues, which is dependent on a fast vascularization. The dorsal skinfold chamber model in female BALB/cJZtm mice allows the observation of microhemodynamic parameters in repeated measurements in vivo and therefore the description of the vascularization of different implant materials. In order to promote vascularization of implant material, we compared a porous polymer patch (a commercially available porous polyurethane based scaffold from Biomerix™) with electrospun polycaprolactone (PCL) fiber mats and chitosan-graft-PCL coated electrospun PCL (CS-g-PCL) fiber mats in vivo. Using intravital fluorescence microscopy microcirculatory parameters were analyzed repetitively over 14 days. Vascularization was significantly increased in CS-g-PCL fiber mats at day 14 compared to the porous polymer patch and uncoated PCL fiber mats. Furthermore CS-g-PCL fiber mats showed also a reduced activation of immune cells. Clinically, these are important findings as they indicate that the CS-g-PCL improves the formation of vascularized tissue and the ingrowth of cells into electrospun PCL scaffolds. Especially the combination of enhanced vascularization and the reduction in immune cell activation at the later time points of our study points to an improved clinical outcome after rotator cuff tear repair.

Organization of liver organoids using Raschig ring-like micro-scaffolds and triple co-culture: Toward modular assembly-based scalable liver tissue engineering

In order to address the remaining issues of fragile structure and insufficient mass transfer faced in modular assembly-based liver tissue engineering, a Raschig ring-like hollowed micro-scaffold was proposed and fabricated using poly-ε-caprolactone with 60% porosity and 11.4 mm² effective surface area for cell immobilization. The method of cell inoculation, the types of cells for co-culture and the scalability of the proposed hollowed micro-scaffold in perfusion were all investigated to obtain an optimized organoid made of tissue modules. Extracellular matrix was found necessary to establish a hierarchical co-culture, and the triple co-culture of Human Hepatoma Hep G2 cells, liver sinusoid cell line TMNK-1 cells and fibroblasts (Swiss 3T3 cells) was recognized to be the most efficient to obtain higher cell attachment, proliferation and hepatic function. The equipped intersecting hollow channels provided in the micro-scaffold functioned as flow paths to promote mass transfer to the immobilized cells after the modules have been randomly packed into a bioreactor for perfusion culture, and resulted in enhanced albumin production and high cellular viability. Cell density comparable to those found in vivo were obtained in the perfused construct, which also maintained its rigid structure. Those results suggest that modular tissues made with hollowed micro-scaffold-based organoids hold great potential for scaling up tissue engineered constructs towards implantation.

Crystalline Characteristics and Their Influence in the Mechanical Performance in Poly(ε-Caprolactone) / High Density Polyethylene Blends

Blends of poly(ε-caprolactone) (PCL) and high-density polyethylene (HDPE) have been prepared at different compositions in order to assess the effect of HDPE on gas transport and mechanical behaviors of PCL. Previous to this evaluation, a complete morphological, structural, and thermal characterization were performed using techniques, including SEM, contact angle, FTIR, differential scanning calorimetry, and X-ray diffraction with synchrotron radiation at small and wide angles. Low HDPE incorporations allow interactions to be established at interfaces in the amorphous regions and the enhancement of the mechanical performance. Consequently, the addition of a small amount of HDPE (ranging from 5 to 10 wt%) appears to be appropriate in certain bio-applications where a higher mechanical behavior is required.

Bioengineering Liver Transplantation

Since the first in-man liver transplantation was performed by Starzl et al [...].

Hydrogels for Liver Tissue Engineering

Bioengineered livers are promising in vitro models for drug testing, toxicological studies, and as disease models, and might in the future be an alternative for donor organs to treat end-stage liver diseases. Liver tissue engineering (LTE) aims to construct liver models that are physiologically relevant. To make bioengineered livers, the two most important ingredients are hepatic cells and supportive materials such as hydrogels. In the past decades, dozens of hydrogels have been developed to act as supportive materials, and some have been used for in vitro models and formed functional liver constructs. However, currently none of the used hydrogels are suitable for in vivo transplantation. Here, the histology of the human liver and its relationship with LTE is introduced. After that, significant characteristics of hydrogels are described focusing on LTE. Then, both natural and synthetic materials utilized in hydrogels for LTE are reviewed individually. Finally, a conclusion is drawn on a comparison of the different hydrogels and their characteristics and ideal hydrogels are proposed to promote LTE.

PCL-Based Composite Scaffold Matrices for Tissue Engineering Applications

Biomaterial-based scaffolds are important cues in tissue engineering (TE) applications. Recent advances in TE have led to the development of suitable scaffold architecture for various tissue defects. In this narrative review on polycaprolactone (PCL), we have discussed in detail about the synthesis of PCL, various properties and most recent advances of using PCL and PCL blended with either natural or synthetic polymers and ceramic materials for TE applications. Further, various forms of PCL scaffolds such as porous, films and fibrous have been discussed along with the stem cells and their sources employed in various tissue repair strategies. Overall, the present review affords an insight into the properties and applications of PCL in various tissue engineering applications.

Channels in a porous scaffold: a new player for vascularization

Vascularization is essential for tissue regeneration. Despite extensive efforts in the past decades, sufficient and rapid vascularization remains a major challenge in tissue engineering. Many studies have shown that the addition of channels in a porous scaffold can provide the ability to promote cell growth and rapid vascularization, thus leading to better outcomes in new tissue formation. Large size scaffolds lack perfusable channel networks and negatively impair the survival of transplanted cells and tissue function development, leading to necrotic core formation and the failure of functional tissue formation. Presently, there are many methods to produce channels in porous scaffolds for vascularization. Here, we review the function of channels in porous scaffolds and the approaches to produce those channels.

Additive manufacturing of biomaterials

Biomaterials are used to engineer functional restoration of different tissues to improve human health and the quality of life. Biomaterials can be natural or synthetic. Additive manufacturing (AM) is a novel materials processing approach to create parts or prototypes layer-by-layer directly from a computer aided design (CAD) file. The combination of additive manufacturing and biomaterials is very promising, especially towards patient specific clinical applications. Challenges of AM technology along with related materials issues need to be realized to make this approach feasible for broader clinical needs. This approach is already making a significant gain towards numerous commercial biomedical devices. In this review, key additive manufacturing methods are first introduced followed by AM of different materials, and finally applications of AM in various treatment options. Realization of critical challenges and technical issues for different AM methods and biomaterial selections based on clinical needs are vital. Multidisciplinary research will be necessary to face those challenges and fully realize the potential of AM in the coming days.

Progress in organ 3D bioprinting

Three dimensional (3D) printing is a hot topic in today's scientific, technological and commercial areas. It is recognized as the main field which promotes "the Third Industrial Revolution". Recently, human organ 3D bioprinting has been put forward into equity market as a concept stock and attracted a lot of attention. A large number of outstanding scientists have flung themselves into this field and made some remarkable headways. Nevertheless, organ 3D bioprinting is a sophisticated manufacture procedure which needs profound scientific/technological backgrounds/knowledges to accomplish. Especially, large organ 3D bioprinting encounters enormous difficulties and challenges. One of them is to build implantable branched vascular networks in a predefined 3D construct. At present, organ 3D bioprinting still in its infancy and a great deal of work needs to be done. Here we briefly overview some of the achievements of 3D bioprinting technologies in large organ, such as the bone, liver, heart, cartilage and skin, manufacturing.

Whole liver engineering: A promising approach to develop functional liver surrogates

Liver donor shortage remains the biggest challenge for patients with end-stage liver failures. While bioartificial liver devices have been developed as temporary supports for patients waiting for transplantation, their applications have been limited clinically. Whole liver engineering is a biological scaffold based regenerative medicine approach that holds promise for developing functional liver surrogates. Significant advancements have been made since the first report in 2010. This review focuses on the recent achievements of whole liver engineering studies.

Di-Block PLCL and Tri-Block PLCLG Matrix Polymeric Nanoparticles Enhanced the Anticancer Activity of Loaded 5-Fluorouracil

In the current study, 5-FU-loaded nanoparticles (NPs) were prepared using polylactic-co-glycolic acid (PLGA), polycaprolactone (PCL), di-block poly lactide-co-caprolactone (PLCL) and tri-block poly L-lactide-co-caprolactone-co-glycolide (PLCLG). The influence of these polymers on the particle sizes, morphology, drug loading, and in vitro drug release was investigated. The anticancer activity was assessed utilizing MTT assay in three human cancer cell lines of different tissue origin; brain (Daoy), liver (HepG2), and colorectal (HT29) using suitable negative and positive controls. The prepared NPs showed a uniform spherical shape with an average size range of 193.5± 6.3 to 303.5± 3.3 nm with negative zeta potential. The entrapment efficiency achieved with F4-F6 (block copolymer NPs) was 78-79% and significantly higher compared with F1 PLGA (31%) and F2; PCL (37%). An initial rapid 5-FU release followed by a slow release ranging from 35% to 81% after 72 h was observed. All the prepared NPs formulations showed enhancement in the cytotoxicity of 5-FU towards all the three cancer cell lines. Generally, block copolymer NPs (F4-F6) showed higher % cell death over PLGA (F1) and PCL (F2) NPs after 48 and 72 h incubation in the case of HepG2 and HT-29. The incorporation of PEG with the tri-block (F6) caused a significant increase in the cytotoxicity of NPs in all of the three cancer cell lines. Block copolymer-based NPs can be considered as promising carriers for enhancing the efficacy of 5-FU in cancer therapy.

Rechargeable and LED-activated ZnGa2O4 : Cr3+ near-infrared persistent luminescence nanoprobes for background-free biodetection

Persistent luminescence nanoparticles (PLNPs) have shown great promise in the field of biomedicine, but are currently limited by the challenge in the synthesis of high-quality PLNPs with bright persistent luminescence and a long afterglow time. Herein, we report a facile strategy for the synthesis of monodisperse, rechargeable and LED-activated ZnGa₂O₄ : Cr³⁺ near-infrared (NIR) PLNPs based on a modified solvothermal liquid-solid-solution method. The as-synthesized PLNPs are not only flexible for bioconjugation, but could also circumvent the limitation of the weak persistent luminescence and short afterglow time that most PLNPs confronted owing to their rechargeable capability. It was unraveled that both thermal activation and quantum tunneling mechanisms contributed to the afterglow decay of the PLNPs, and the quantum tunneling was found to dictate the LED-activated afterglow intensity and lasting time. Furthermore, by utilizing the superior excitation-free persistent luminescence, we demonstrated for the first time the application of biotinylated ZnGa₂O₄ : Cr³⁺ PLNPs as background-free luminescent nano-bioprobes for sensitive and specific detection of avidin in a heterogeneous assay with a limit of detection down to ∼150 pM, thus revealing the great potential of these NIR PLNPs in ultrasensitive biodetection and bioimaging.

Biomaterials and Culture Technologies for Regenerative Therapy of Liver Tissue

Regenerative approach has emerged to substitute the current extracorporeal technologies for the treatment of diseased and damaged liver tissue. This is based on the use of biomaterials that modulate the responses of hepatic cells through the unique matrix properties tuned to recapitulate regenerative functions. Cells in liver preserve their phenotype or differentiate through the interactions with extracellular matrix molecules. Therefore, the intrinsic properties of the engineered biomaterials, such as stiffness and surface topography, need to be tailored to induce appropriate cellular functions. The matrix physical stimuli can be combined with biochemical cues, such as immobilized functional groups or the delivered actions of signaling molecules. Furthermore, the external modulation of cells, through cocultures with nonparenchymal cells (e.g., endothelial cells) that can signal bioactive molecules, is another promising avenue to regenerate liver tissue. This review disseminates the recent approaches of regenerating liver tissue, with a focus on the development of biomaterials and the related culture technologies.

Effects of mesoporous calcium magnesium silicate on setting time, compressive strength, apatite formation, degradability and cell behavior to magnesium phosphate based bone cements

Mesoporous calcium magnesium silicate was doped into magnesium phosphate to fabricate magnesium phosphate based composite cements (MBC).

Novel integrative methodology for engineering large liver tissue equivalents based on three-dimensional scaffold fabrication and cellular aggregate assembly

A novel engineering methodology for organizing a large liver tissue equivalent was established by intergrating both 'top down' and 'bottom up' approaches. A three-dimensional (3D) scaffold was engineered comprising 43 culture chambers (volume: 11.63 cm(3)) assembled in a symmetrical pattern on 3 layers, a design which enables further scaling up of the device to a clinically significant size (volume: 500 cm(3)). In addition, an inter-connected flow channel network was designed and proved to homogenously deliver culture medium to each chamber with the same pressure drop. After fabrication using nylon-12 and a selective laser sintering process, co-cultured cellular aggregates of human hepatoma Hep G2 and TMNK-1 cells were loosely packed into the culture chambers with biodegradable poly-L-lactic acid fibre pieces for 9 days of perfusion culture. The device enabled increased hepatic function and well-maintained cell viability, demonstrating the importance of an independent medium flow supply for cell growth and function provided by the current 3D scaffold. This integrative methodology from the macro- to the micro-scale provides an efficient way of arranging engineered liver tissue with improved mass transfer, making it possible to further scale up to a construct with clinically relevant size while maintaining high per-volume-based physiological function in the near future.

Microfluidic-based generation of functional microfibers for biomimetic complex tissue construction

Microfluidic-based fiber system displays great potential in reconstructing naturally complex tissues. In these systems, fabrication of the basic fiber is a significant factor in ensuring a functional construction. The fiber should possess the strong mechanical rigidity for assembly, predefined microenvironment for cell spatial distribution and high biocompatibility for cell functional expression. Herein we presented a composite material by the combination of methacrylated gelatin (GelMA) and alginate for fiber engineering with capillary microfluidic device. Being regulated by GelMA incorporation, the composite hydrogels exhibited higher mechanical moduli, better stretching performance, and lower swelling compared to pure alginate one. On the basis of the composite material and capillary microfluidic device, we constructed the double-layer hollow microfibers to simulate complex tissues. The microfibers could be precisely controlled in size and multi-layered structure by varying flow rates and outlet diameter, and it showed satisfied application in woven-structure assembly. As an example to mimic a functional tissue, a biomimetic osteon-like structure was fabricated by encapsulating human umbilical vascular endothelial cells (HUVECs) in middle layer to imitate vascular vessel and human osteoblast-like cells (MG63) in the outer layer to act role of bone. During the incubation period, both MG63 and HUVECs exhibited not only a robust growth, but also up-regulated gene expression. These results demonstrated this microfluidic-based composite microfibers system is a promising alternative in complex tissue regeneration.

STATEMENT OF SIGNIFICANCE

Cell-laden microfibers based on microfluidic device is attracting interest for reconstructing naturally complex tissues. One shortage is the lack of suitable materials which satisfy microfluidic fabrication and cell biofunctional survival. This study reports the first combination of alginate-GelMA composite and capillary-based microfluidic technology. The composite materials possess high mechanical properties for fabrication and assembly, and tunable environment for cell spatial encapsulation. Significantly, the engineered double-layer hollow microfiber with osteon-like structure showed enhanced cellular bioactivity and realized initially functional establishment. This microfluidic-based composite microfiber not only explores a competitive candidate in complex tissues reconstruction, but also expands the biological application of microfluidic technology. This developing interdisciplinary area should be widely interested to the readers of biofabrication, biomaterials and tissue engineering.

Construction of Large-Volume Tissue Mimics with 3D Functional Vascular Networks

We used indirect stereolithography (SL) to form inner-layered fluidic networks in a porous scaffold by introducing a hydrogel barrier on the luminal surface, then seeded the networks separately with human umbilical vein endothelial cells and human lung fibroblasts to form a tissue mimic containing vascular networks. The artificial vascular networks provided channels for oxygen transport, thus reducing the hypoxic volume and preventing cell death. The endothelium of the vascular networks significantly retarded the occlusion of channels during whole-blood circulation. The tissue mimics have the potential to be used as an in vitro platform to examine the physiologic and pathologic phenomena through vascular architecture.

A novel open-porous magnesium scaffold with controllable microstructures and properties for bone regeneration

The traditional production methods of porous magnesium scaffolds are difficult to accurately control the pore morphologies and simultaneously obtain appropriate mechanical properties. In this work, two open-porous magnesium scaffolds with different pore size but in the nearly same porosity are successfully fabricated with high-purity Mg ingots through the titanium wire space holder (TWSH) method. The porosity and pore size can be easily, precisely and individually controlled, as well as the mechanical properties also can be regulated to be within the range of human cancellous bone by changing the orientation of pores without sacrifice the requisite porous structures. In vitro cell tests indicate that the scaffolds have good cytocompatibility and osteoblastic differentiation properties. In vivo findings demonstrate that both scaffolds exhibit acceptable inflammatory responses and can be almost fully degraded and replaced by newly formed bone. More importantly, under the same porosity, the scaffolds with larger pore size can promote early vascularization and up-regulate collagen type 1 and OPN expression, leading to higher bone mass and more mature bone formation. In conclusion, a new method is introduced to develop an open-porous magnesium scaffold with controllable microstructures and mechanical properties, which has great potential clinical application for bone reconstruction in the future.

Automated quantitative assessment of three-dimensional bioprinted hydrogel scaffolds using optical coherence tomography

Reconstructing and quantitatively assessing the internal architecture of opaque three-dimensional (3D) bioprinted hydrogel scaffolds is difficult but vital to the improvement of 3D bioprinting techniques and to the fabrication of functional engineered tissues. In this study, swept-source optical coherence tomography was applied to acquire high-resolution images of hydrogel scaffolds. Novel 3D gelatin/alginate hydrogel scaffolds with six different representative architectures were fabricated using our 3D bioprinting system. Both the scaffold material networks and the interconnected flow channel networks were reconstructed through volume rendering and binarisation processing to provide a 3D volumetric view. An image analysis algorithm was developed based on the automatic selection of the spatially-isolated region-of-interest. Via this algorithm, the spatially-resolved morphological parameters including pore size, pore shape, strut size, surface area, porosity, and interconnectivity were quantified precisely. Fabrication defects and differences between the designed and as-produced scaffolds were clearly identified in both 2D and 3D; the locations and dimensions of each of the fabrication defects were also defined. It concludes that this method will be a key tool for non-destructive and quantitative characterization, design optimisation and fabrication refinement of 3D bioprinted hydrogel scaffolds. Furthermore, this method enables investigation into the quantitative relationship between scaffold structure and biological outcome.

Advances in Functional Assemblies for Regenerative Medicine

The ability to synthesise bioresponsive systems and selectively active biochemistries using polymer-based materials with supramolecular features has led to a surge in research interest directed towards their development as next generation biomaterials for drug delivery, medical device design and tissue engineering.

Controlling the blood glucose of type 1 diabetes mice by co-culturing MIN-6 β cells on 3D scaffold

T1D is an autoimmune disease, which may be caused by lack of insulin-secreting β cells due to damage of autoimmune system. Living with T1D is a challenge for the child and the family; cell transplantation is a treatment option for diabetes in children. To establish a microenvironment suitable for cell growth and proliferation as well as for sustained cellular function, we used MIN-6 β cells as seed cells and SF-IV collagen as a 3D composite scaffold to construct artificial pancreas in this experiment. The cell viabilities were determined by MTT assay, and the response of cells to different glucose concentrations was observed by glucose stimulation test. Artificial pancreas was transplanted into the abdominal cavity of T1D mice, and the changes of blood glucose were monitored. After 10 days, insulin expression was detected by immunohistochemical method, and the claybank stained area showed effectiveness of insulin secretion. A series of experiments showed that implantation of 3D cell scaffold into the abdominal cavity can effectively control the blood glucose level of T1D mice. It also had longer-lasting hypoglycemic effects than simple cell transplantation, which was expected to become a new method for the treatment of T1D.

Photo-cross-linkable methacrylated gelatin and hydroxyapatite hybrid hydrogel for modularly engineering biomimetic osteon

Modular tissue engineering holds great potential in regenerating natural complex tissues by engineering three-dimensional modular scaffolds with predefined geometry and biological characters. In modular tissue-like construction, a scaffold with an appropriate mechanical rigidity for assembling fabrication and high biocompatibility for cell survival is the key to the successful bioconstruction. In this work, a series of composite hydrogels (GH0, GH1, GH2, and GH3) based on a combination of methacrylated gelatin (GelMA) and hydroxyapatite (HA) was exploited to enhance hydrogel mechanical rigidity and promote cell functional expression for osteon biofabrication. These composite hydrogels presented a lower swelling ratio, higher mechanical moduli, and better biocompatibility when compared to the pure GelMA hydrogel. Furthermore, on the basis of the composite hydrogel and photolithograph technology, we successfully constructed an osteon-like concentric double-ring structure in which the inner ring encapsulating human umbilical vascular endothelial cells (HUVECs) was designed to imitate blood vessel tubule while the outer ring encapsulating human osteoblast-like cells (MG63s) acts as part of bone. During the coculture period, MG63s and HUVECs exhibited not only satisfying growth status but also the enhanced genic expression of osteogenesis-related and angiogenesis-related differentiations. These results demonstrate this GelMA-HA composite hydrogel system is promising for modular tissue engineering.

Application of avidin-biotin technology to improve cell adhesion on nanofibrous matrices

BACKGROUND

Electrospinning is an easy and effective technique to produce submicron fibers possessing a range of attractive characteristics such as interconnected porous structures similar to natural ECM and good resilience to movement. Rapid and efficient cell attachment to nanofibrous matrices is a necessary prerequisite in tissue engineering. Thus, the aim of this study is to evaluate poly(ε-caprolactone-co-lactide)/Pluronic (PLCL/Pluronic) nanofibrous matrices with avidin-biotin technology for improving cell adhesion for the first time.

RESULTS

PLCL/Pluronic nanofibers had relatively homogeneous fibers and interconnected porous structures. Pluronic significantly modified the hydrophilicity of nanofibrous matrices and PLCL/Pluronic nanofibrous matrices had better performance on maintaining cell proliferation. Avidin-biotin technology had no negative effect on the hydrophilic property, mechanical property and cell proliferation. Meanwhile, the attachment and spreading of adipose-derived stem cells (ADSCs) onto PLCL/Pluronic nanofibrous matrices with avidin-biotin technology was promoted obviously.

CONCLUSIONS

PLCL/Pluronic nanofibrous matrices inheriting the excellent characteristics of both PLCL and Pluronic have the better cell adhesion ability through avidin-biotin technology, implying a promising application in skin care, tissue regeneration and other related area.

Induction of Hepatic and Endothelial Differentiation by Perfusion in a Three-Dimensional Cell Culture Model of Human Fetal Liver

The development of functional engineered tissue constructs depends on high cell densities and appropriate vascularization. In this study we implemented a four-compartment three-dimensional perfusion bioreactor culture model for studying the effects of medium perfusion on endothelial, hepatic, and hematopoietic cell populations of primary human fetal liver in an in vivo-like environment. Human fetal liver cells were cultured in bioreactors configured to provide either perfusion or diffusion conditions. Metabolic activities of the cultures were monitored daily by measuring glucose consumption and lactate production. Cell viability during culture was analyzed by lactate dehydrogenase activity. Hepatic functionality was determined by the release of albumin and alpha-fetoprotein (AFP) in culture medium samples. After 4 days of culture, cells were analyzed for the expression of a variety of endothelial, hepatic, and hematopoietic genes, as well as the surface marker expression of CD31 and CD34 in flow cytometry. We found that medium perfusion increased the gene expression of endothelial markers such as CD31, von Willebrand factor (vWF), CD140b, CD309, and CD144 while decreasing the gene expression of the erythrocyte-surface marker CD235a. Hepatic differentiation was promoted under perfusion conditions as demonstrated by lower AFP and higher albumin secretion compared with cultures not exposed to medium perfusion. Additionally, cultures exposed to medium perfusion gave higher rates of glucose consumption and lactate production, indicating increased metabolic activity. In conclusion, high-density bioreactors configured to provide constant medium perfusion significantly induced hepatic and endothelial cell differentiation and provided improved conditions for the culture of human fetal liver cells compared with cultures without perfusion.

Influence of 3D porous galactose containing PVA/gelatin hydrogel scaffolds on three-dimensional spheroidal morphology of hepatocytes

Three-dimensional liver scaffolds are temporary framework that mimics native ECM architecture and positively influence hepatocyte lodging, proliferation with retention of metabolic activities. The aim of the current study is to develop galactose containing physical cross-linked polyvinyl alcohol/gelatin (P/G 8:2 and 9:1) hydrogel scaffolds via freeze/thaw technique. The 8:2 and 9:1 P/G hydrogels exhibited comparable pore size and porosity (P > 0.05). The tensile strength of the fabricated 8:2 and 9:1 P/G hydrogel scaffolds were found to be in accordance with native human liver. Pore interconnectivity of both the P/G hydrogel scaffolds was confirmed by scanning electron micrographs and liquid displacement method. Further galactose containing hydrogel promoted cell-cell and cell-hydrogel interaction, aiding cellular aggregation leading to spheroids formation compared to void P/G hydrogel by 7 days. Hence, galactose containing P/G hydrogel could be more promising substrate as it showed significantly higher cell proliferation and albumin secretion for 21 days when compared to non-galactose P/G hydrogels (P < 0.05).

Lanthanide-doped Sr2YF7 nanoparticles: controlled synthesis, optical spectroscopy and biodetection

Sr2YF7, as an important matrix for trivalent lanthanide (Ln(3+)) ions to fabricate upconversion (UC) or downshifting (DS) phosphors, has been rarely reported. Herein, monodisperse and size-controllable tetragonal-phase Ln(3+)-doped Sr2YF7 nanoparticles (NPs) were synthesized via a facile thermal decomposition method. Upon excitation at 980 nm, UC luminescence properties of Sr2YF7:Ln(3+)/Yb(3+) (Ln = Tm, Er) NPs were systematically surveyed. Particularly, after coating an inert Sr2YF7 shell, the UC luminescence intensities of Sr2YF7:Tm(3+)/Yb(3+) and Sr2YF7:Er(3+)/Yb(3+) NPs were enhanced by ∼22 and 4 times, respectively. Furthermore, intense multicolor DS luminescence was also achieved in Ce(3+)/Tb(3+) or Eu(3+) doped Sr2YF7 NPs, with absolute quantum yields of 55.1% (Tb(3+)) and 11.2% (Eu(3+)). The luminescence lifetimes of (5)D4 (Tb(3+)) and (5)D0 (Eu(3+)) were determined to be 3.7 and 8.1 ms, respectively. By utilizing the long-lived luminescence of Ln(3+) in these Sr2YF7 NPs, we demonstrated their application as sensitive heterogeneous time-resolved photoluminescence bioprobes to detect the protein of avidin and the tumor marker of the carcinoembryonic antigen (CEA) with their limits of detection down to 40.6 and 94.9 pM, and thus reveal the great potential of these Sr2YF7:Ln(3+) nanoprobes in cancer diagnosis.

ADVANCED TISSUE ENGINEERING STRATEGIES FOR VASCULARIZED PARENCHYMAL CONSTRUCTS

The fabrication of vascularized parenchymal organs to alleviate donor shortage in organ transplantation is the holy grail of tissue engineering. However, conventional tissue-engineering strategies have encountered huge challenges in recapitulating complex structural organization of native organs (e.g., orderly arrangement of multiple cell types and vascular network), which plays an important role in engineering functional vascularized parenchymal constructs in vitro. Recent developments of various advanced tissue-engineering strategies have exhibited great promise in replicating organ-specific architectures into artificial constructs. Here, we review the recent advances in top-down and bottom-up strategies for the fabrication of vascularized parenchymal constructs. We highlight the fabrication of microfluidic scaffolds potential for nutrient transport or vascularization as well as the controlled multicellular arrangement. The advantages as well as the limitations associated with these strategies will be discussed. It is envisioned that the combination of microfluidic concept in top-down strategies and multicellular arrangement concept in bottom-up strategies could potentially generate new insights for the fabrication of vascularized parenchymal organs.

Biomimetic design and fabrication of porous chitosan–gelatin liver scaffolds with hierarchical channel network

The presence of a hierarchical channel network in tissue engineering scaffold is essential to construct metabolically demanding liver tissue with thick and complex structures. In this research, chitosan–gelatin (C/G) scaffolds with fine three-dimensional channels were fabricated using indirect solid freeform fabrication and freeze-drying techniques. Fabrication processes were studied to create predesigned hierarchical channel network inside C/G scaffolds and achieve desired porous structure. Static in-vitro cell culture test showed that HepG2 cells attached on both micro-pores and micro-channels in C/G scaffolds successfully. HepG2 proliferated at much higher rates on C/G scaffolds with channel network, compared with those without channels. This approach demonstrated a promising way to engineer liver scaffolds with hierarchical channel network, and may lead to the development of thick and complex liver tissue equivalent in the future.