Photocrosslinked anhydride systems for long-term protein release

Drug Delivery and Drug Efficacy from Amorphous Poly(thioether anhydrides)

The correlation between erosion and drug (lidocaine and 6-mercaptopurine, 6-MP) release from amorphous poly(thioether anhydrides), which are synthesized using radical-mediated thiol-ene polymerization, is reported. Cytotoxicity studies of the polymer toward human fibroblast human dermal fibroblasts adult, melanoma A-375, and breast cancer MCF-7 cells are conducted, and drug efficacy of a cancer and autoimmune disease drug (6-MP) when released from the poly(thioether anhydrides) is examined against two cancerous cell types (A-375 and MCF-7). Erosion and drug release studies reveal that lidocaine release is governed by network erosion whereas 6-MP is released by a combination of erosion and diffusion. The cytotoxicity studies show that all three cell types demonstrate high viability, thus cytocompatibility, to poly(thioether anhydrides). Toxicity to the material is dose dependent and comparable to other polyanhydride systems. The 6-MP cancer drug is shown to remain bioactive after encapsulation in the poly(thioether anhydride) matrix and the polymer does not appear to modify the efficacy of the drug.

Photo-crosslinked anhydride-modified polyester and -ethers for pH-sensitive drug release

Photo-crosslinkable polymers have a great potential for the delivery of sensitive drugs. They allow preparation of drug releasing devices by photo-crosslinking, thus avoiding high processing temperatures. In this study, the hydrolysis behavior and drug release of three different photo-crosslinkable poly(ether anhydride)s and one poly(ester anhydride) were investigated. Three-arm poly(ethylene glycol) or polycaprolactone was reacted with succinic anhydride to obtain carboxylated macromers, and further functionalized with methacrylic anhydride to form methacrylated marcromers with anhydride linkages. The synthetized macromers were used to prepare photo-crosslinked matrices with different hydrolytic degradation times for active agent release purposes. The hydrolysis was clearly pH-sensitive: polymer networks degraded slowly in acidic conditions, and degradation rate increased as the pH shifted towards basic conditions. Drug release was studied with two water-soluble model drugs lidocaine (234 mol/g) and vitamin B₁₂ (1355 g/mol). Vitamin B₁₂ was released mainly due to polymer network degradation, whereas smaller molecule lidocaine was released also through diffusion and swelling of polymer network. Only a small amount of vitamin B₁₂ was released in acidic conditions (pH 1.3 and pH 2.1). These polymers have potential in colon targeted drug delivery as the polymer could protect sensitive drugs from acidic conditions in the stomach, and the drug would be released as the conditions change closer to neutral pH in the intestine.

Biodegradable polyanhydride-based nanomedicines for blood to brain drug delivery

An urgent need to deliver therapeutics across the blood-brain barrier (BBB) underlies a paucity of effective therapies currently available for treatment of degenerative, infectious, traumatic, chemical, and metabolic disorders of the nervous system. With an eye toward achieving this goal, an in vitro BBB model was employed to simulate biodegradable polyanhydride nanoparticle-based drug delivery to the brain. Using a combination of confocal microscopy, flow cytometry, and high performance liquid chromatography, we examined the potential of polyanhydride nanoparticles containing the anti-oxidant, mito-apocynin, to be internalized and then transferred from monocytes to human brain microvascular endothelial cells. The efficacy of this nanoparticle-based delivery platform was demonstrated by neuronal protection against oxidative stress. Taken together, this polyanhydride nanoparticle-based delivery system holds promise for enhancing neuroprotection by facilitating drug transport across the BBB. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2881-2890, 2018.

Preparation of fluoride-loaded microcapsules for anticariogenic bacterial growth using a coaxial ultrasonic atomizer

A new method to deliver fluoride using biodegradable poly(lactic-co-glycolic acid) microcapsules to suppress cariogenic bacterial growth during orthodontic treatment was investigated. A coaxial ultrasonic atomizer was used to encapsulate KF solution into microcapsules. The orthodontic adhesive resin disk containing fluoride loaded microcapsules (DFLM) was prepared by LED light curing. The microstructure of microcapsules, successful loading of KF, fracture strength, and shear bonding strength were assessed by FE-SEM, confocal laser scanning microscope, and general purpose testing machine, respectively. Fluoride release from the DFLM in phosphate buffered saline and pH changes were measured after different periods of soaking time. Antibacterial activity of the DFLM was assessed in tryptic soy broth containing mutant streptococci. The starting inoculum and the orthodontic resin disk containing microcapsules not loaded with KF were used as negative and positive controls, respectively. As results, the cumulative amount of KF after 49 days was about 85% of the initial amount of fluoride contained in the microcapsules. The fracture and shear bonding strengths of the orthodontic resin disks with and without the microcapsules were similar to each other. The DFLM showed lower bacterial growth than the control groups, whereas no statistically significant differences were found between the negative and positive controls. It can be concluded that the microcapsules loaded with fluoride prepared by a coaxial ultrasonic atomizer have good potential for application as an antibacterial agent due to their excellent cariogenic antibacterial activity when incorporated into orthodontic adhesive resin. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 31-39, 2018.

Neuronal protection against oxidative insult by polyanhydride nanoparticle-based mitochondria-targeted antioxidant therapy

A progressive loss of neuronal structure and function is a signature of many neurodegenerative conditions including chronic traumatic encephalopathy, Parkinson's, Huntington's and Alzheimer's diseases. Mitochondrial dysfunction and oxidative and nitrative stress have been implicated as key pathological mechanisms underlying the neurodegenerative processes. However, current therapeutic approaches targeting oxidative damage are ineffective in preventing the progression of neurodegeneration. Mitochondria-targeted antioxidants were recently shown to alleviate oxidative damage. In this work, we investigated the delivery of biodegradable polyanhydride nanoparticles containing the mitochondria-targeted antioxidant apocynin to neuronal cells and the ability of the nano-formulation to protect cells against oxidative stress. The nano-formulated mitochondria-targeted apocynin provided excellent protection against oxidative stress-induced mitochondrial dysfunction and neuronal damage in a dopaminergic neuronal cell line, mouse primary cortical neurons, and a human mesencephalic cell line. Collectively, our results demonstrate that nano-formulated mitochondria-targeted apocynin may offer improved efficacy of mitochondria-targeted antioxidants to treat neurodegenerative disease.

Polyanhydrides: Synthesis, Properties, and Applications

This review focusses on polyanhydrides, a fascinating class of degradable polymers that have been used in and investigated for many bio-related applications because of their degradability and capacity to undergo surface erosion. This latter phenomenon is driven by hydrolysis of the anhydride moieties at the surface and high hydrophobicity of the polymer such that degradation and mass loss (erosion) occur before water can penetrate deep within the bulk of the polymer. As such, when surface-eroding polymers are used as therapeutic delivery vehicles, the rate of delivery is often controlled by the rate of polymer erosion, providing predictable and controlled release rates that are often zero-order. These desirable attributes are heavily influenced by polymer composition and morphology, and therefore also monomer structure and polymerization method. This review examines approaches for polyanhydride synthesis, discusses their general thermomechanical properties, surveys their hydrolysis and degradation processes along with their biocompatibility, and looks at recent developments and uses of polyanhydrides in drug delivery, stimuli-responsive materials, and novel nanotechnologies.

Pulmonary biodistribution and cellular uptake of intranasally administered monodisperse particles

PURPOSE

For the rational design of nanovaccines against respiratory pathogens, careful selection of optimal particle size and chemistry is paramount. This work investigates the impact of these properties on the deposition, biodistribution, and cellular interactions of nanoparticles within the lungs.

METHOD

In this work, biodegradable poly(sebacic anhydride) (poly(SA)) nanoparticles of multiple sizes were synthesized with narrow particle size distributions. The lung deposition and retention as well as the internalization by phagocytic cells of these particles were compared to that of non-degradable monodisperse polystyrene nanoparticles of similar sizes.

RESULTS

The initial deposition of intranasally administered particles in the lungs was dependent on primary particle size, with maximal deposition occurring for the 360-470 nm particles, regardless of chemistry. Over time, both particle size and chemistry affected the frequency of particle-positive cells and the specific cell types taking up particles. The biodegradable poly(SA) particles associated more closely with phagocytic cells and the dynamics of this association impacted the clearance of these particles from the lung.

CONCLUSIONS

The findings reported herein indicate that both size and chemistry control the fate of intranasally administered particles and that the dynamics of particle association with phagocytic cells in the lungs provide important insights for the rational design of pulmonary vaccine delivery vehicles.

Paclitaxel Release from Polyether-Anhydrides Prepared with UV-Curing Process

Polyanhydrides have been used as drug delivery systems to achieve a long-term delivery due to its hydrophobicity and surface erosion degradation behavior. In order to develop a simple, economical, and rapid approach to synthesize polyanhydrides, we prepared a series of polyether-anhydride membranes composed of different mass fractions of sebacic acid, polyethylene glycol dimethacrylate, and poly(tetramethylene oxide) dimethacrylate by ultraviolet curing process. The chemical structure and thermal properties of target polyanhydrides were characterized, while the paclitaxel releases from the polymer matrix were evaluated by HPLC. The results demonstrated that the UV-curing process is a good method to synthesize the target polymers in a short time, and the paclitaxel release procedure can be controlled by changing the component in the copolymers.

Photo-crosslinked networks prepared from fumaric acid monoethyl ester-functionalized poly(D,L-lactic acid) oligomers and N-vinyl-2-pyrrolidone for the controlled and sustained release of proteins

Photo-crosslinked networks were prepared from fumaric acid monoethyl ester-functionalized poly(D,L-lactic acid) oligomers and N-vinyl-2-pyrrolidone. Two model proteins, lysozyme and albumin, were incorporated into the network films as solid particles and their release behavior was studied. By varying the NVP content and macromer molecular weight the degradation behavior and protein release profiles of the prepared networks could be tuned. The more hydrophilic and less densely crosslinked networks released albumin and lysozyme at a faster rate. Although active lysozyme was released from the networks over the complete release period, lysozyme release was often incomplete. This was most likely caused by electrostatic and/or hydrophobic interactions between the protein and the degrading polymer network.

Biomedical Applications of Biodegradable Polymers

Utilization of polymers as biomaterials has greatly impacted the advancement of modern medicine. Specifically, polymeric biomaterials that are biodegradable provide the significant advantage of being able to be broken down and removed after they have served their function. Applications are wide ranging with degradable polymers being used clinically as surgical sutures and implants. In order to fit functional demand, materials with desired physical, chemical, biological, biomechanical and degradation properties must be selected. Fortunately, a wide range of natural and synthetic degradable polymers has been investigated for biomedical applications with novel materials constantly being developed to meet new challenges. This review summarizes the most recent advances in the field over the past 4 years, specifically highlighting new and interesting discoveries in tissue engineering and drug delivery applications.

Application of fiber-optic attenuated total reflection-FT-IR methods for in situ characterization of protein delivery systems in real time

A fiber-optic coupled attenuated total reflection (ATR)-FT-IR spectroscopy technique was applied to the study of two different therapeutic delivery systems, acid degradable hydrogels and nanoparticles. Real time exponential release of a model protein, human serum albumin (HSA), was observed from two different polymeric hydrogels formulated with a pH sensitive cross-linker. Spectroscopic examination of nanoparticles formulated with an acid degradable polymer shell and encapsulated HSA exhibited vibrational signatures characteristic of both particle and payload when exposed to lowered pH conditions, demonstrating the ability of this methodology to simultaneously measure phenomena arising from a system with a mixture of components. In addition, thorough characterization of these pH sensitive delivery vehicles without encapsulated protein was also accomplished in order to separate the effects of the payload during degradation. When in situ, real time detection in combination with the ability to specifically identify different components in a mixture without involved sample preparation and minimal sample disturbance is provided, the versatility and suitability of this type of experiment for research in the pharmaceutical field is demonstrated.

Visible light-induced crosslinkable gelatin

A novel visible light-crosslinkable porcine gelatin was prepared for gelation and micropatterning. The preparation employed a photo-oxidation-induced crosslinking mechanism. First, furfuryl groups were incorporated into the gelatin. Second, the modified gelatin was mixed in water with Rose Bengal, which is a visible light sensitizer. Irradiation by visible light solidified the aqueous solution. In addition, when the solution was cast on a plate, dried and photo-irradiated in the presence of a photomask a micropattern was formed that matched the micropattern on the photomask. The gelatin-immobilized regions enhanced cell adhesion. It was also confirmed that the gelatin incorporating furfuryl and Rose Bengal have no significant toxicity. The photo-crosslinkable gelatin was employed as a direct pulp capping material in the dental field. Considering these results, this system could be useful as a new type of visible light-induced crosslinkable biosealant.

Poly(ester anhydride)/mPEG amphiphilic block co-polymer nanoparticles as delivery devices for paclitaxel

This work focused on the preparation and characterization of a novel amphiphilic block co-polymer and paclitaxel-loaded co-polymer nanoparticles (NPs) and in vitro evaluation of the release of paclitaxel and cytotoxicity of NPs. mPEG-b-P(OA-DLLA)-b-mPEG was prepared via melt polycondensation of methoxy poly(ethylene glycol) (mPEG), octadecanedioic acid (OA) and D,L-lactic acid (DLLA) and characterized by FT-IR, (1)H-NMR, (13)C-NMR, GPC, DSC and XRD. The paclitaxel-loaded mPEG-b-P(OA-DLLA)-b-mPEG NPs were prepared by nanoprecipitation and then characterized by LPSA, TEM and (1)H-NMR. In vitro release behaviors of the paclitaxel-loaded NPs were investigated by HPLC. In vitro cytotoxicity of NPs was evaluated by MTT assay with normal mouse lung fibroblast cells (L929) as model cells. The composition of mPEG-b-P(OA-DLLA)-b-mPEG is consistent with that of the designed co-polymer. The paclitaxel-loaded NPs are of spherical shape with core/shell structure and size smaller than 300 nm. Paclitaxel can be continuously released from the paclitaxel-loaded NPs and the in vitro release rate of paclitaxel decreases with increasing the content of the P(OA-DLLA) segments in the co-polymer. The mPEG-b-P(OA-DLLA)-b-mPEG NPs are non-toxic to L929. The results suggest that mPEG-b-P(OA-DLLA)-b-mPEG NPs are a potential candidate carrier material for the controlled delivery of paclitaxel and other hydrophobic compounds.

BSA-FITC-loaded microcapsules for in vivo delivery

Here we describe the preparation of BSA-FITC-loaded microcapsules as a model protein system for in vivo delivery. BSA-FITC-loaded microcapsules were prepared using a mono-axial nozzle ultrasonic atomizer, varying a number of parameters to determine optimal conditions. The preparation method chosen resulted in a BSA-FITC encapsulation efficiency of approximately 60% and a particle size of approximately 50 microm. An analysis of the microcapsules showed a BSA-FITC core surrounded by a poly(D,L-lactic-co-glycolic acid) (PLGA) shell. Injection of BSA-FITC-loaded microcapsules into rats resulted in a sustained release of BSA-FITC that maintained increased concentrations of BSA-FITC in plasma for up to 2 weeks. In contrast, the concentration of BSA-FITC in plasma after injection of BSA-FITC-only solution reached near-zero levels within 3 days. Fluorescence images of microcapsules removed at various times after implantation showed a gradual decrease of BSA-FITC in BSA-FITC-loaded microcapsules, confirming a sustained in vivo release of BSA-FITC. The duration of in vivo release and plasma concentration of BSA-FITC was correlated with the initial dose of BSA-FITC. BSA-FITC-loaded microcapsules maintained their structure for at least 4 weeks in the rat. The inflammatory response observed initially after injection declined over time. In conclusion, BSA-FITC-loaded microcapsules achieved sustained release of BSA-FITC, suggesting that microcapsules manufactured as described may be useful for in vivo delivery of pharmacologically active proteins.