Drug releasing behavior of hybrid micelles containing polypeptide triblock copolymer

Efficient Strategy to Synthesize Tunable pH-Responsive Hybrid Micelles Based on Iron Oxide and Gold Nanoparticles

The preparation of multifunctional nanomaterials based on inorganic nanoparticles with organic materials has emerged as a promising strategy for the development of new nanomedicines for in vitro and in vivo biomedical applications. Here, we synthesized pH-responsive hybrid inorganic micelles by combining a novel pH-responsive amphiphilic molecule with hydrophobic payloads. This amphiphile was synthesized in a one-pot reaction and self-assembled readily into micelles under acidic pH conditions. In the presence of hydrophobic NP payloads such as AuNPs or IONPs, the amphiphile self-organized around them through hydrophobic interactions, resulting in the formation of colloidally stable hybrid micelles. The size of the hydrophobic NPs determined the pH-response of the inorganic hybrid micelles, which is tuned from pH 7 to 11 for our pH-responsive amphiphilic molecule. This achievement represents a novel approach for the synthesis of tunable pH-responsive hybrid micelles based on inorganic NPs for biomedical imaging, hyperthermia treatment, and also drug delivery nanosystems.

Teaching an Old Dog New Tricks: A Global Approach to Enhancing the Cytotoxicity of Drug-Loaded, Non-responsive Micelles Using Oligoelectrolytes

Polymeric micelles have been extensively studied as vectors for the delivery of hydrophobic drugs for the treatment of cancers and other diseases. Despite intensive research, few formulations provide significant benefits, and even fewer have been clinically approved. While many traditional non-responsive micelles have excellent safety profiles, they lack the ability to respond to the intracellular environment and release their cargo in a spatiotemporally defined manner to effectively deliver large doses of cytotoxic drugs into the cytosol of cells that overwhelm efflux pumps. As a novel and adaptable strategy, we hypothesized that well-established non-responsive polymeric micelles could be augmented with a pH-trigger via the co-encapsulation of cytocompatible oligoelectrolytes, which would allow rapid cargo release in the endosome, leading to increased cytotoxicity. Herein, we demonstrate how this strategy can be applied to render non-responsive micelles pH-responsive, resulting in abrupt cargo release at specific and tunable pH values compatible with endosomal delivery, which significantly increased their cytotoxicity up to 3-fold in an ovarian adenocarcinoma (SKOV-3) cell line compared to non-responsive micelles. In comparison, the oligoelectrolyte-loaded micelles were significantly less toxic to healthy 3T3 fibroblasts, indicating a selective cargo release in cancer cell lines. Oligoelectrolytes can be co-encapsulated in the micelles along with drugs at high encapsulation efficiency percentages, which are both ejected from the micelle core upon oligoelectrolyte ionization. Mechanistically, the increase in cytotoxicity appears to also result from the accelerated endosomal escape of the cargo caused by disruption of the endosomal membrane by the simultaneous release of the oligoelectrolytes from the micelles. Furthermore, we show how this approach is broadly applicable to non-responsive micelles regardless of their composition and various classes of hydrophobic chemotherapeutics. The preliminary studies presented here reveal the versatility and wide scope of oligoelectrolyte-mediated, pH-triggered drug release as a compelling and powerful strategy to enhance the cytotoxicity of non-responsive polymeric micelles.

Block Sequence Effects on the Self-Assembly Behaviors of Polypeptide-Based Penta-Block Copolymer Hydrogels

Peptide-based hydrogels have great potential for applications in tissue engineering, drug delivery, and so on. We systematically synthesize, characterize, and investigate the self-assembly behaviors of a series of polypeptide-based penta-block copolymers by varying block sequences and lengths. The copolymers contain hydrophobic blocks of poly(γ-benzyl-l-glutamate) (PBG, Bx) and two kinds of hydrophilic blocks, poly(l-lysine) (PLL, Ky) and poly(ethylene glycol) (PEG, EG34), where x and y are the number of repeating units of each block, where PBG and PLL blocks have unique functions for nerve regeneration and cell adhesion. It shows that a sufficient length of the middle hydrophilic segment capped with hydrophobic end PBG blocks is required. They first self-assemble into flower-like micelles and sequentially form transparent hydrogels (as low as 2.3 wt %) with increased polymer concentration. The hydrogels contain a microscale porous structure, a desired property for tissue engineering to facilitate the access of nutrient flow for cell growth and drug delivery systems with high efficiency of drug storage. We hypothesize that the structure of Bx-Ky-EG34-Ky-Bx agglomerates is beyond micron size (transparent), while that of Ky-Bx-EG34-Bx-Ky is on the submicron scale (opaque). We establish a working strategy to synthesize a polypeptide-based block copolymer with a wide window of sol-gel transition. The study offers insight into rational polypeptide hydrogel design with specific morphology, exploring the novel materials as potential candidates for neural tissue engineering.

Self-Assembly of Poly(Amino Acid)s Mediated by Secondary Conformations

Self-assembly of block copolymers has recently drawn great attention due to its remarkable performance and wide variety of applications in biomedicine, biomaterials, microelectronics, photoelectric materials, catalysts, etc. Poly(amino acid)s (PAAs), formed by introducing synthetic amino acids into copolymer backbones, are able to fold into different secondary conformations when compared with traditional amphiphilic copolymers. Apart from changing the chemical composition and degree of polymerization of copolymers, the self-assembly behaviors of PAAs could be controlled by their secondary conformations, which are more flexible and adjustable for fine structure tailoring. In this article, we summarize the latest findings on the variables that influence secondary conformations, in particular the regulation of order-to-order conformational changes and the approaches used to manage the self-assembly behaviors of PAAs. These strategies include controlling pH, redox reactions, coordination, light, temperature, and so on. Hopefully, we can provide valuable perspectives that will be useful for the future development and use of synthetic PAAs.

Phase separation in polymer-based biomimetic structures containing planar membranes

Phase separation in biological membranes is crucial for proper cellular functions, such as signaling and trafficking, as it mediates the interactions of condensates on membrane-bound organelles and transmembrane transport to targeted destination compartments. The separation of a lipid bilayer into phases and the formation of lipid rafts involve the restructuring of molecular localization, their immobilization, and local accumulation. By understanding the processes underlying the formation of lipid rafts in a cellular membrane, it is possible to reconstitute this phenomenon in synthetic biomimetic membranes, such as hybrids of lipids and polymers or membranes composed solely of polymers, which offer an increased physicochemical stability and unlimited possibilities of chemical modification and functionalization. In this article, we relate the main lipid bilayer phase transition phenomenon with respect to hybrid biomimetic membranes, composed of lipids mixed with polymers, and fully synthetic membranes. Following, we review the occurrence of phase separation in biomimetic hybrid membranes based on lipids and/or direct lipid analogs, amphiphilic block copolymers. We further exemplify the phase separation and the resulting properties and applications in planar membranes, free-standing and solid-supported. We briefly list methods leading to the formation of such biomimetic membranes and reflect on their improved overall stability and influence on the separation into different phases within the membranes. Due to the importance of phase separation and compartmentalization in cellular membranes, we are convinced that this compiled overview of this phenomenon will be helpful for any researcher in the biomimicry area.

Hyperoside-loaded TPGs/mPEG-PDLLA self-assembled polymeric micelles: preparation, characterization and in vitro/in vivo evaluation

Hyperoside (Hyp) self-assembled polymeric micelles (Hyp-PMs) were purposely developed to enhance aqueous solubility, in vivo availability and anti-oxidative effect of Hyp. In preparing Hyp-PMs, we employed the thin film dispersion method with the micelles consisting of TPGs and mPEG2000-PDLLA3000. The particle size, polydispersity index and zeta potential of Hyp-PMs were 67.42 ± 1.44 nm, 0.229 ± 0.015 and -18.67 ± 0.576 mV, respectively, coupled with high encapsulation efficiency (EE)of 90.63 ± 1.45% and drug loading (DL) of 6.97 ± 1.56%. Furthermore, the value of critical micelle concentration (CMC) was quite low, which indicated good stability and improved self-assembly ability of Hyp-PMs. Also, trend of in vitro Hyp release from Hyp-PMs demonstrated enhanced solubility of Hyp. Similarly, in comparison with free Hyp, oral bioavailability of Hyp-PMs was improved (about 8 folds) whilst half-life of Hyp-PMs was extended (about 3 folds). In vitro anti-oxidative effect showed obvious strong scavenging DPPH capability of Hyp-PMs, which may be attributed to its smaller size and better solubility. Altogether, Hyp-PMs may serve as a possible strategy to potentially enhance aqueous solubility, bioavailability and anti-oxidative effect of Hyp, which may play a key role in Hyp application in the pharmaceutical industries.

Synthesis, Characterization and Structure Properties of Biobased Hybrid Copolymers Consisting of Polydiene and Polypeptide Segments

Novel hybrid materials of the PB-b-P(o-Bn-L-Tyr) and PI-b-P(o-Bn-L-Tyr) type (where PB: 1,4/1,2-poly(butadiene), PI: 3,4/1,2/1,4-poly(isoprene) and P(o-Bn-L-Tyr): poly(ortho-benzyl-L-tyrosine)) were synthesized through anionic and ring-opening polymerization under high-vacuum techniques. All final materials were molecularly characterized through infrared spectroscopy (IR) and proton and carbon nuclear magnetic resonance (1H-NMR, 13C-NMR) in order to confirm the successful synthesis and the polydiene microstructure content. The stereochemical behavior of secondary structures (α-helices and β-sheets) of the polypeptide segments combined with the different polydiene microstructures was also studied. The influence of the α-helices and β-sheets, as well as the polydiene chain conformations on the thermal properties (glass transition temperatures, thermal stability, α- and β-relaxation) of the present biobased hybrid copolymers, was investigated through differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and dielectric spectroscopy (DS). The obtained morphologies in thin films for all the synthesized materials via atomic force microscopy (AFM) indicated the formation of polypeptide fibrils in the polydiene matrix.

Multifunctional polymeric micellar nanomedicine in the diagnosis and treatment of cancer

Polymeric micelles are a prevalent topic of research for the past decade, especially concerning their fitting ability to deliver drug and diagnostic agents. This delivery system offers outstanding advantages, such as biocompatibility, high loading efficiency, water-solubility, and good stability in biological fluids, to name a few. The multifunctional polymeric micellar architect offers the added capability to adapt its surface to meet the looked-for clinical needs. This review cross-talks the recent reports, proof-of-concept studies, patents, and clinical trials that utilize polymeric micellar family architectures concerning cancer targeted delivery of anticancer drugs, gene therapeutics, and diagnostic agents. The manuscript also expounds on the underlying opportunities, allied challenges, and ways to resolve their bench-to-bedside translation for allied clinical applications.

In search of a novel chassis material for synthetic cells: emergence of synthetic peptide compartment

Giant lipid vesicles have been used extensively as a synthetic cell model to recapitulate various life-like processes, including in vitro protein synthesis, DNA replication, and cytoskeleton organization. Cell-sized lipid vesicles are mechanically fragile in nature and prone to rupture due to osmotic stress, which limits their usability. Recently, peptide vesicles have been introduced as a synthetic cell model that would potentially overcome the aforementioned limitations. Peptide vesicles are robust, reasonably more stable than lipid vesicles and can withstand harsh conditions including pH, thermal, and osmotic variations. This mini-review summarizes the current state-of-the-art in the design, engineering, and realization of peptide-based chassis materials, including both experimental and computational work. We present an outlook for simulation-aided and data-driven design and experimental realization of engineered and multifunctional synthetic cells.

pH-responsive polymeric micelles self-assembled from benzoic-imine-containing alkyl-modified PEGylated chitosan for delivery of amphiphilic drugs

In order to efficiently promote loading efficiency and aqueous photostability of indocyanine green (ICG), an amphiphilic tricarbocyanine dye, the polysaccharide-based nanomicelles utilized as a vehicle for ICG were fabricated by self-assembly of the amphiphilic benzoic-imine-containing PEGylated chitosan/4-(dodecyloxy)benzaldehyde (DBA) conjugates in aqueous solution of pH 7.4. The resulting polymeric micelles were characterized to have a hydrophobic hybrid chitosan/DBA core surrounded by hydrophilic PEG shells. Importantly, the encapsulation of ICG into the hybrid chitosan/DBA core of polymeric micelles by the combined hydrophobic and electrostatic interactions not only promoted the ICG loading but also enhanced its aqueous photostability. With the pH of micelle suspension being reduced from 7.4 to 5.0, upon acid-triggered cleavage of benzoic-imine bonds between chitosan and DBA as well as the extending of the protonated chitosan segments from hybrid cores toward aqueous phase, the rather hydrophobic DBA-rich core was formed within micelles, thereby leading to shrinking of the polymeric micelles. The robust ICG-loaded polymeric micelles showed several superior properties including the inhibition of ICG leakage under the mimic physiological and acidic conditions, favorable biocompatibility and photo-activated hyperthermia effect. This work suggests that the pH-responsive ICG-carrying chitosan-based micelles display great potential in cancer theranostic.

Codelivery of doxorubicin and camptothecin by dual-responsive unimolecular micelle-based β-cyclodextrin for enhanced chemotherapy

Tumor microenvironment (TME)-induced drug delivery technology is a promising strategy for improving low drug accumulation efficiency, short blood circulation and weak therapeutic effect. In this work, a dual-responsive (reduction- and pH-responsive) polyprodrug nanoreactor based on β-cyclodextrin (β-CD) was constructed for combinational chemotherapy. Specifically, the dual-responsive star polymeric prodrug was synthesized by atom transfer radical polymerization (ATRP) based on a starburst initiator of β-CD-Br. The obtained polyprodrug contained a hydrophilic chain of poly-(ethylene glycol) methyl ether methacrylate (POEGMA) and a hydrophobic part of camptothecin (CPT) prodrug and poly[2-(diisopropylamino)ethyl methacrylate] (PDPA), denoted as β-CD-PDPA-POEGMA-PCPT (CCDO for short). The obtained CCDO could form stable unimolecular micelles, which could be efficiently internalized by cancer cells. To enhance the curative effect, the anticancer agent doxorubicin (DOX) could be encapsulated into the hydrophobic cavity of the CCDO by hydrophobic-hydrophobic interaction. In vitro drug release studies showed that the obtained CCDO/DOX micelles controlled the release of active CPT and DOX occurring in a reductive environment and at low pH. In vitro cytotoxicity results suggested that the anticancer efficacy of dual-responsive CCDO/DOX micelles was superior to that of CCDO micelles. In addition, in vivo results verified good blood compatibility of the unimolecular micelles. This integrated dual-responsive drug delivery system may solve the low drug loading and poor controlled release problems found in traditional polymer-based drug carriers, providing an innovative and promising route for cancer therapy.

Revealing Fast Structural Dynamics in pH-Responsive Peptides with Time-Resolved X-ray Scattering

Many biomaterials can adapt to changes in the local biological environment (such as pH, temperature, or ionic composition) in order to regulate function or deliver a payload. Such adaptation to environmental perturbation is typically a hierarchical process that begins with a response at a local structural level and then propagates to supramolecular and macromolecular scales. Understanding fast structural dynamics that occur upon perturbation is important for rational design of functional biomaterials. However, few nanosecond time-resolved methods can probe both intra- and intermolecular scales simultaneously with a high structural resolution. Here, we utilize time-resolved X-ray scattering to probe nanosecond to microsecond structural dynamics of poly-l-glutamic acid undergoing protonation via a pH jump initiated by photoexcitation of a photoacid. Our results provide insights into the protonation-induced hierarchical changes in packing of peptide chains, formation of a helical structure, and the associated collapse of the peptide chain.

Polypeptide self-assemblies: nanostructures and bioapplications

Polypeptide copolymers can self-assemble into diverse aggregates. The morphology and structure of aggregates can be varied by changing molecular architectures, self-assembling conditions, and introducing secondary components such as polymers and nanoparticles. Polypeptide self-assemblies have gained significant attention because of their potential applications as delivery vehicles for therapeutic payloads and as additives in the biomimetic mineralization of inorganics. This review article provides an overview of recent advances in nanostructures and bioapplications related to polypeptide self-assemblies. We highlight recent contributions to developing strategies for the construction of polypeptide assemblies with increasing complexity and novel functionality that are suitable for bioapplications. The relationship between the structure and properties of the polypeptide aggregates is emphasized. Finally, we briefly outline our perspectives and discuss the challenges in the field.

Co-delivery of PLK1-specific shRNA and doxorubicin via core-crosslinked pH-sensitive and redox ultra-sensitive micelles for glioma therapy

Anticancer drug delivery encounters many biological barriers, including mucosal barriers, nonspecific uptake and intracellular drug resistance.

pH-sensitive polymeric nanoparticles with antioxidant and anti-inflammatory properties against cisplatin-induced hearing loss

Polymeric nanoparticles (NPs) based on smart synthetic amphiphilic copolymers are used to transport and controlled release dexamethasone in the inner ear to protect against the ototoxic effect of cisplatin. The NPs were based on a mixture of two pseudo-block polymer drugs obtained by free radical polymerization: poly(VI-co-HEI) and poly(VP-co-MVE) or poly(VP-co-MTOS), being VI 1-vinylimidazole, VP N-vinylpyrrolidone, and HEI, MVE and MTOS the methacrylic derivatives of ibuprofen, α-tocopherol and α-tocopheryl succinate, respectively. The NPs were obtained by nanoprecipitation with appropriate hydrodynamic properties, and isoelectric points that matched the pH of inflamed tissue. The NPs were tested both in vitro (using HEI-OC1 cells) and in vivo (using a murine model) with good results. Although the concentration of dexamethasone administered in the NPs is around two orders of magnitude lower that the conventional treatment for intratympanic administration, the NPs protected from the cytotoxic effect of cisplatin when the combination of the appropriate properties in terms of size, zeta potential, encapsulation efficiency and isoelectric point were achieved. To the best of our knowledge this is the first time that pH sensitive NPs are used to protect from cisplatin-induced hearing loss by intratympanic administration.

Photoresponsive Block Copolymer Prodrug Nanoparticles as Delivery Vehicle for Single and Dual Anticancer Drugs

In recent decades, drug delivery systems (DDSs) based on polymer nanoparticles have been explored due to their potential to deliver drugs with poor water solubility. Some of the limitations of nanoparticle-based DDSs can be overcome by developing an appropriate polymer prodrug. In this work, poly(NIPA)-b-poly(HMNPPA)-b-poly(PEGMA-stat-BA) was synthesized using reversible addition fragmentation chain transfer polymerization and Chlorambucil (Cbl), an anticancer drug, was conjugated to the copolymer via 3-(3-(hydroxymethyl)-4-nitrophenoxy)propyl acrylate (HMNPPA) units to prepare the prodrug. A few biotin acrylate (BA) units were also incorporated to bring potential targeting capability to the prodrug in the copolymer. This polymer prodrug formed spherical micellar nanoparticles in physiological conditions, which were characterized by dynamic light scattering and transmission electron microscopy measurements. The very low critical aggregation concentration (cac) (0.011 mg/mL) of the prodrug, as measured from Nile Red fluorescence, makes it stable against dilution. The polymer prodrug was shown to release Cbl on photoirradiation by soft UV (λ ≥ 365 nm) and laser (λ = 405 nm) light. The prodrug micellar nanoparticles were capable of encapsulating a second drug (doxorubicin, DOX) in their hydrophobic core. On photoirradiation with UV and laser light of the DOX-loaded nanoparticles, both Cbl and DOX were released. Light-induced breaking of photolabile ester bond resulted in the release of Cbl and caused disruption of the nanoparticles facilitating release of DOX. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay confirmed the nontoxicity of the polymers and effectiveness of the dual drug-loaded micellar nanoparticles toward cancer cells. Confocal microscopy results showed a better cellular internalization capability of the DOX-loaded nanoparticles in cancer cells, possibly due to the presence of cancer cell targeting biotin molecules in the polymer. This new photoresponsive potentially biocompatible and cancer cell-targeted polymer prodrug may be useful for delivery of single and/or multiple hydrophobic drugs.

Asymmetric Polymersomes from an Oil-in-Oil Emulsion: A Computer Simulation Study

Asymmetric vesicles are valuable for understanding and mimicking cell and practical biomedicine applications. Recently, a very straightforward methodology for fabricating asymmetric polymersome was developed by Lodge's group through the coassembly of polystyrene-b-poly(ethylene oxide) (PS-b-PEO) and polybutadiene-b-poly(ethylene oxide) (PB-b-PEO) block copolymers at the interface of a polystyrene/polybutadiene/chloroform (PS/PB/CHCl₃) emulsion. However, the in-depth microscopic mechanism for the formation of asymmetric polymersomes remains unclear. To address this issue, in this article, the coassembly process for the formation of the asymmetric polymersomes in Asano's experimental system was systematically investigated by employing a dissipative particle dynamics (DPD) simulation. Our results definitely demonstrate the formation of the asymmetric polymersomes such as that in the experiments and that the bilayer formed through the folding and crossing of the PEO blocks. Besides, from the microscopic view, three stages can be discerned in the formation process: (1) the formation of micelles, (2) the micelle diffusion to the interface, and (3) the micelle rearrangement at the interface to form an asymmetric polymersome. Meanwhile, the incompatibility among PS, PB, and PEO is proven to be the main driving force for asymmetric polymersome formation. Moreover, the effects of the order of addition of copolymers and the volume fraction of PEO blocks on the structure of the asymmetric polymersomes are also investigated. We find that the formation process is affected severely by the order of addition, and adding PS-b-PEO first can make the asymmetric bilayer more perfect. Not only that, but perfect asymmetric polymersomes can be formed only when the volume fraction of PEO (f_PEO) is greater than 0.55. We believe the present work can extend the knowledge of the self-assembly of asymmetric polymersomes, especially with respect to the self-assembly mechanism.

Polymeric micelles for ocular drug delivery: From structural frameworks to recent preclinical studies

Effective intraocular drug delivery poses a major challenge due to the presence of various elimination mechanisms and physiological barriers that result in low ocular bioavailability after topical application. Over the past decades, polymeric micelles have emerged as one of the most promising drug delivery platforms for the management of ocular diseases affecting the anterior (dry eye syndrome) and posterior (age-related macular degeneration, diabetic retinopathy and glaucoma) segments of the eye. Promising preclinical efficacy results from both in-vitro and in-vivo animal studies have led to their steady progression through clinical trials. The mucoadhesive nature of these polymeric micelles results in enhanced contact with the ocular surface while their small size allows better tissue penetration. Most importantly, being highly water soluble, these polymeric micelles generate clear aqueous solutions which allows easy application in the form of eye drops without any vision interference. Enhanced stability, larger cargo capacity, non-toxicity, ease of surface modification and controlled drug release are additional advantages with polymeric micelles. Finally, simple and cost effective fabrication techniques render their industrial acceptance relatively high. This review summarizes structural frameworks, methods of preparation, physicochemical properties, patented inventions and recent advances of these micelles as effective carriers for ocular drug delivery highlighting their performance in preclinical studies.

Counterintuitive cooperative endocytosis of like-charged nanoparticles in cellular internalization: computer simulation and experiment

The nanoparticles (NPs) functionalized with charged ligands are of particular significance due to their potential drug/gene delivery and biomedical applications. However, the molecular mechanism of endocytosis of the charged NPs by cells, especially the effect of the NP-NP and NP-biomembrane interactions on the internalization pathways is still poorly understood. In this work, we systematically investigate the internalization behaviors of the positively charged NPs by combining experiment technology and dissipative particle dynamics (DPD) simulation. We experimentally find an interesting but highly counterintuitive phenomenon, i.e. the multiple positively charged NPs prefer to enter cells cooperatively although the like-charged NPs have obvious electrostatic repulsion. Furthermore, we adopt the DPD simulation to confirm the experimental findings, and reveal that the mechanism of the cooperative endocytosis between like-charged NPs is definitely caused by the interplay of particle size, the charged ligand density on particle surface and local concentration of NPs. Importantly, we not only observe the normal cooperative endocytosis of like-charged NPs in cell biomembrane like neutral NP case, but also predict the 'bud' cooperative endocytosis of like-charged NPs which is absence in the neutral NP case. The results indicate that electrostatic repulsion between the positively charged nanoparticles plays an important role in the 'bud' cooperative endocytosis of like-charged NPs.

Interaction Pathways between Plasma Membrane and Block Copolymer Micelles

In this work, the interactions between block copolymer micelles (BCMs) and plasma membranes were investigated by performing coarse-grained molecular dynamics (CGMD) simulations. Different binding strengths between the BCMs and the membranes were tested, and four interaction pathways were discovered: attachment, semiendocytosis, endocytosis, and fusion. Endocytosis was the most efficient way for the BCMs to be taken up, and fusion could lead to cytotoxicity. Unlike rigid particles, deformation of the BCMs strongly affected the interaction pathways. We examined the effects of changing the aggregation number of the BCMs (N_agg), the chain length of the polymer (N_b), and the chain stiffness of the hydrophobic block (k_a), and we learned that smaller N_agg and lower N_b could lead to weaker cellular uptake capacities, whereas larger N_agg and higher N_b gave rise to higher cytotoxicities. Moreover, a weaker chain stiffness of the hydrophobic block could be more favorable for obtaining BCMs with higher internalization efficacies and lower cytotoxicities. The results of these simulations could aid in the design of BCMs with desirable cellular internalization capacities and lower cytotoxicities. Such BCMs could be useful in drug-delivery systems.

Polymeric mixed micelles as nanomedicines: Achievements and perspectives

During the past few decades, polymeric micelles have raised special attention as novel nano-sized drug delivery systems for optimizing the treatment and diagnosis of numerous diseases. These nanocarriers exhibit several in vitro and in vivo advantages as well as increased stability and solubility to hydrophobic drugs. An interesting approach for optimizing these properties and overcoming some of their disadvantages is the combination of two or more polymers in order to assemble polymeric mixed micelles. This review article gives an overview on the current state of the art of several mixed micellar formulations as nanocarriers for drugs and imaging probes, evaluating their ongoing status (preclinical or clinical stage), with special emphasis on type of copolymers, physicochemical properties, in vivo progress achieved so far and toxicity profiles. Besides, the present article presents relevant research outcomes about polymeric mixed micelles as better drug delivery systems, when compared to polymeric pristine micelles. The reported data clearly illustrates the promise of these nanovehicles reaching clinical stages in the near future.

Preparation, Characterization, and Biological Evaluation of Poly(Glutamic Acid)-b-Polyphenylalanine Polymersomes

Different types of amphiphilic macromolecular structures have been developed within recent decades to prepare the polymer particles considered as drug delivery systems. In the present research the series of amphiphilic block-copolymers containing poly(glutamatic acid) as hydrophilic, and polyphenylalanine as hydrophobic blocks was synthesized and characterized. Molecular weights for homo- and copolymers were determined by gel-permeation chromatography (GPC) and amino acid analysis, respectively. The copolymers obtained were applied for preparation of polymer particles. The specific morphology of prepared polymerosomes was proved using transmission electron microscopy (TEM). The influence on particle size of polymer concentration and pH used for self-assembly, as well as on the length of hydrophobic and hydrophilic blocks of applied copolymers, was studied by dynamic light scattering (DLS). Depending on different experimental conditions, the formation of nanoparticles with sizes from 60 to 350 nm was observed. The surface of polymersomes was modified with model protein (enzyme). No loss in biocatalytic activity was detected. Additionally, the process of encapsulation of model dyes was developed and the possibility of intracellular delivery of the dye-loaded nanoparticles was proved. Thus, the nanoparticles discussed can be considered for the creation of modern drug delivery systems.

Blood Exosomes Endowed with Magnetic and Targeting Properties for Cancer Therapy

Exosomes are a class of naturally occurring nanoparticles that are secreted endogenously by mammalian cells. Clinical applications for exosomes remain a challenge because of their unsuitable donors, low scalability, and insufficient targeting ability. In this study, we developed a dual-functional exosome-based superparamagnetic nanoparticle cluster as a targeted drug delivery vehicle for cancer therapy. The resulting exosome-based drug delivery vehicle exhibits superparamagnetic behavior at room temperature, with a stronger response to an external magnetic field than individual superparamagnetic nanoparticles. These properties enable exosomes to be separated from the blood and to target diseased cells. In vivo studies using murine hepatoma 22 subcutaneous cancer cells showed that drug-loaded exosome-based vehicle delivery enhanced cancer targeting under an external magnetic field and suppressed tumor growth. Our developments overcome major barriers to the utility of exosomes for cancer application.

Disk-like micelles with cylindrical pores from amphiphilic polypeptide block copolymers

An unprecedented 2-dimensional disk-like micelle with cylindrical pores was achieved by self-assembly of amphiphilic block copolypeptides PEG-b-PBLG with an α-helical conformation of PBLG blocks.

Multicompartment micelles based on hierarchical co-assembly of PCL-b-PEG and PCL-b-P4VP diblock copolymers

Multicompartment micelles with various morphologies were preparedviadirected stepwise self-assembly using pre-assembled subunits, which were first constructed through the co-assembly of two amphiphilic diblock copolymer: PCL-b-PEG and PCL-b-P4VP.

Recent development of unimolecular micelles as functional materials and applications

Unimolecular micelles have high functionalities, encapsulation capabilities and site specific confinement abilities in various applications.

Developing a Dissociative Nanocontainer for Peptide Drug Delivery

The potency, selectivity, and decreased side effects of bioactive peptides have propelled these agents to the forefront of pharmacological research. Peptides are especially promising for the treatment of neurological disorders and pain. However, delivery of peptide therapeutics often requires invasive techniques, which is a major obstacle to their widespread application. We have developed a tailored peptide drug delivery system in which the viral capsid of P22 bacteriophage is modified to serve as a tunable nanocontainer for the packaging and controlled release of bioactive peptides. Recent efforts have demonstrated that P22 nanocontainers can effectively encapsulate analgesic peptides and translocate them across blood-brain-barrier (BBB) models. However, release of encapsulated peptides at their target site remains a challenge. Here a Ring Opening Metathesis Polymerization (ROMP) reaction is applied to trigger P22 nanocontainer disassembly under physiological conditions. Specifically, the ROMP substrate norbornene (5-Norbornene-2-carboxylic acid) is conjugated to the exterior of a loaded P22 nanocontainer and Grubbs II Catalyst is used to trigger the polymerization reaction leading to nanocontainer disassembly. Our results demonstrate initial attempts to characterize the ROMP-triggered release of cargo peptides from P22 nanocontainers. This work provides proof-of-concept for the construction of a triggerable peptide drug delivery system using viral nanocontainers.

Molecular dynamics simulation study of chitosan and gemcitabine as a drug delivery system

By using molecular dynamics (MD) simulation, biodegradable biopolymer chitosan as a carrier for the drug gemcitabine was investigated and the effect of three initial drug concentrations (10, 40, and 80%) on its loading efficiency was studied. Then water was added to the systems of drug and biopolymer and the effects of water on the interactions of drug and chitosan and on the drug loading efficiency were examined. From the results it was found that the maximum loading of the drug occurred at 40% of the drug concentration. The radial distribution function calculations indicated that in the absence of water molecules, the drug molecules were located at shorter distance from chitosan and the loading efficiency of the drug in these systems was higher.

Hierarchical nanostructures self-assembled from a mixture system containing rod-coil block copolymers and rigid homopolymers

Self-assembly behavior of a mixture system containing rod-coil block copolymers and rigid homopolymers was investigated by using Brownian dynamics simulations. The morphologies of formed hierarchical self-assemblies were found to be dependent on the Lennard-Jones (LJ) interaction ε_RR between rod blocks, lengths of rod and coil blocks in copolymer, and mixture ratio of block copolymers to homopolymers. As the ε_RR value decreases, the self-assembled structures of mixtures are transformed from an abacus-like structure to a helical structure, to a plain fiber, and finally are broken into unimers. The order parameter of rod blocks was calculated to confirm the structure transition. Through varying the length of rod and coil blocks, the regions of thermodynamic stability of abacus, helix, plain fiber, and unimers were mapped. Moreover, it was discovered that two levels of rod block ordering exist in the helices. The block copolymers are helically wrapped on the homopolymer bundles to form helical string, while the rod blocks are twistingly packed inside the string. In addition, the simulation results are in good agreement with experimental observations. The present work reveals the mechanism behind the formation of helical (experimentally super-helical) structures and may provide useful information for design and preparation of the complex structures.

Core crosslinked H-type poly(methacrylic acid)-block-hydroxyl terminated polybutadiene-block-poly(methacrylic acid) four-armed star block copolymer micelles for intercellular drug release

H-type four-armed star block copolymers with hydroxyl-terminated polybutadiene as hydrophobic sections and poly(methacrylic acid) as hydrophilic fragments were synthesized through atom transform radical polymerization and the follow-up acidolysis, named PMAA2- b-HTPB- b-PMAA2. The core crosslinking reaction was conducted by ultraviolet light irradiation. 1H nuclear magnetic resonance, Fourier transform infrared, size exclusion chromatography, and thermal gravimetric analysis were adopted to confirm the chemical structure of the resulting copolymers. The effect of the ultraviolet light crosslinking on the physicochemical properties of the block copolymer micelles was investigated by fluorescent spectrometry, ultraviolet transmittance, dynamic light scattering, and transmission electron microscope measurements. The results showed that the crosslinking resulted in formation of the stable copolymer micelles and change in the physicochemical parameters, for example, lower critical micelle concentration and smaller micellar size than the uncrosslinked one. Drug loading and in vitro drug release disclosed that the crosslinked copolymer micelles had enhanced drug loading capacity and encapsulation efficiency, less drug leakage, and thus smaller harm to the normal cells but better therapy effect than the uncrosslinked counterpart by the aid of the pH-induced paclitaxel release. The copolymer micelles exhibited pH-dependent cytotoxicity, and therefore, they might be a promising drug target release carrier in biomedical applications.

Hybrid protein-synthetic polymer nanoparticles for drug delivery

Among the most common nanoparticulate systems, the polymeric nanocarriers have a number of key benefits, which give a great choice of delivery platforms. Nevertheless, polymeric nanoparticles possess some limitations that include use of toxic solvents in the production process, polymer degradation, drug leakage outside the diseased tissue, and polymer cytotoxicity. The combination of polymers of biological and synthetic origin is an appealing modern strategy for the production of novel nanocarriers with unprecedented properties. Proteins' interface can play an important role in determining bioactivity and toxicity and gives perspective for future development of the polymer-based nanoparticles. The design of hybrid constructs composed of synthetic polymer and biological molecules such as proteins can be considered as a straightforward tool to integrate a broad spectrum of properties and biofunctions into a single device. This review discusses hybrid protein-synthetic polymer nanoparticles with different structures and levels in complexity and functionality, in view of their applications as drug delivery systems.

Multifunctional pH-sensitive micelles for tumor-specific uptake and cellular delivery

Dox in the LHRH-PEG-PHIS-Dox/Dox-TAT system could be transported into tumor cells via two pathways: LHRH receptor-mediated endocytosis and TAT-mediated nonendocytotic process.

Polypeptide-based "smart" micelles for dual-drug delivery: a combination study of experiments and simulations

A dual-drug-loaded micelle is designed and constructed from a mixture of poly(propylene oxide)-b-poly(γ-benzyl-l-glutamate)-b-poly(ethylene glycol) (PPO-b-PBLG-b-PEG) triblock terpolymers and two model drugs, doxorubicin (DOX) and naproxen (Nap). In the micelles, the DOX is chemically linked to the PBLG backbones through an acid-cleavable hydrazone bond, whereas the Nap is physically encapsulated in the cores. The drug loading and releasing behaviors of the dual-drug-loaded micelles as well as single drug-loaded micelles (DOX-conjugated or Nap-loaded micelles) are studied. The structures of micelles are characterized by means of microscopies and dynamic light scattering, and further examined by dissipative particle dynamics (DPD) simulations. It is revealed that the micelles possess a core-shell-corona structure in which the PPO/Nap, PBLG/DOX, and PEG aggregate to form the core, shell, and corona, respectively. In vitro studies reveal that the release of DOX and Nap is pH- and thermosensitive. Such drug releasing behaviors are also examined by DPD simulations, and more information regarding the mechanism is obtained. In addition, the bio-related properties such as cellular uptake of the micelles and biocompatibility of the deliveries are evaluated. The results show that the dual-drug-loaded micelles are biocompatible at normal physiological conditions and retain the anti-cancer efficiency.

Asymmetric vesicle constructed by AB/CB diblock copolymer mixture and its behavior: a Monte Carlo study

Asymmetric vesicles constructed from AB/CB diblock copolymer mixture in a selective solvent for A and C blocks are studied using Monte Carlo simulation. The effects of the mixed ratio of the two diblock copolymers, the solution pH, and the hydrophilic chain length on the distributions of hydrophilic blocks on the surfaces of asymmetric vesicles are studied systematically. The simulation results show that asymmetric vesicle, in which the inner and outer surfaces are constructed from different hydrophilic blocks, can be obtained from AB/CB diblock copolymer mixture. The formation of ABC or CBA three-layer asymmetric vesicle depends on the composition of the mixture, the chain length of hydrophilic block, and the solution pH. The hydrophilic block with the same charge (induced by the solution pH), or longer chain length, or lower content in the mixture is more likely to distribute on the outer surface of the vesicle. Moreover, the transition from ABC to CBA three-layer asymmetric vesicle in which blocks C are charged can occur by adjusting the composition of the mixture. On the other hand, the investigations of the interfacial energy density of asymmetric vesicles elucidate the distribution regularity of hydrophilic blocks. When the hydrophilic chain lengths are equal, the difference between the outer and inner interfacial energies is the main factor that determines the asymmetric vesicle structures; that is, the distributions of different hydrophilic blocks on asymmetric vesicles always tend to gain the largest difference between the outer and inner interfacial energies. However, when the hydrophilic chain lengths are different, the chain conformational entropy becomes the main driving force for determining the distribution of hydrophilic blocks on asymmetric vesicles.

Facile synthesis and characterization of novel biodegradable amphiphilic block copolymers bearing pendant hydroxyl groups

Novel amphiphilic block copolymers bearing pendant hydroxyl groups polylactide-b-poly(3,3-bis(Hydroxymethyl-triazolylmethyl) oxetane)-b-polylactide (PLA-b-PHMTYO-b-PLA) were synthesized via a facile and efficient method. First, the block copolymer intermediates polylactide-b-poly(3,3-Diazidomethyloxetane)-b-polylactide (PLA-b-PBAMO-b-PLA) were synthesized through ring-opening polymerization of lactide using PBAMO as a macroinitiator. Following "Click" reaction of PLA-b-PBAMO-b-PLA with propargyl alcohol provided the targeted amphiphilic block copolymers PLA-b-PHMTYO-b-PLA with pendant hydroxyl groups. The composition and structure of prepared copolymers were characterized by (1)H nuclear magnetic resonance ((1)H NMR) spectroscopy, Fourier transform infrared (FT-IR) and gel permeation chromatography (GPC). The self-assembly behavior of the copolymers in water was investigated by transmission electron microscope (TEM), dynamic light scattering (DLS) and static light scattering (SLS). The results showed that the novel copolymers PLA-b-PHMTYO-b-PLA self-assembled into spherical micelles with diameters ranging from 100 nm to 200 nm in aqueous solution. These copolymers also exhibited low critical micellar concentrations (CMC: 6.9 × 10(-4)mg/mL and 3.9 × 10(-5)mg/mL, respectively). In addition, the in vitro cytotoxicity of these copolymers was determined in the presence of L929 cells. The results showed that the block copolymers PLA-b-PHMTYO-b-PLA exhibited better biocompatibility. Therefore, these well-defined copolymers are expected to find some applications in drug delivery or tissue engineering.

Hybrid polymeric micelles based on bioactive polypeptides as pH-responsive delivery systems against melanoma

The bioactive polymer poly(L-glutamic acid)n-b-poly(D, L-lactic acid)m was synthesized and used to form doxorubicin-loaded hybrid polymeric micelles to treat melanoma. These polymers exhibited pH-responsive changes in conformation, which controlled the diverse functionalities of the micelles. During circulation, poly(L-glutamic acid)n-b-poly(D, L-lactic acid)m protected Tat peptides on the micelles from proteolysis. Under tumor-acidic conditions, polymers with shorter poly(l-glutamic acid) blocks underwent a conformational change to form channels that accelerated the release of doxorubicin. The conformational change also exposed the Tat peptides to tumor cells, thereby promoting cellular internalization of the micelles. Enhanced cellular uptake of the micelles induced significant apoptosis of A375 melanoma cells in tumor-acidic conditions. In vivo studies demonstrated that the micelles with shorter poly(L-glutamic acid) blocks could effectively accumulate in tumor tissues, suppress tumor growth and help maintain the body weight of tumor-bearing mice. However, micelles with longer poly(l-glutamic acid) blocks did not undergo a conformational change under acidic conditions and performed poorly in both in vitro and in vivo evaluations. Our work provides a strategy for applying bioactive polymers to the rational construction of pH-responsive delivery systems for solid tumors and lends insight into possible conformational effects on the bioactivity of drug carriers.

Effect of drug release kinetics on nanoparticle therapeutic efficacy and toxicity

The effects of nanoparticle (NP) properties, such as size, shape and surface charge, on their efficacy and toxicity have been studied extensively. However, the effect of controlled drug release on NP efficacy and toxicity has not been thoroughly evaluated in vivo. Our study aims to fill this knowledge gap. A key challenge in characterizing the relationship between drug release and therapeutic ratio is to fabricate NPs that differ only in their drug release profile but are otherwise identical. To overcome this challenge, we developed crosslinkable lipid shell (CLS) NPs, where the drug release kinetics can be modulated without changing any other NP property. Using CLS NPs with wortmannin and docetaxel as model drugs, we determined the relationship between the release kinetics and therapeutic efficacy and toxicity of the drugs. We have determined that drug release kinetics can affect the therapeutic efficacy of NP docetaxel and NP wortmannin in vitro and in vivo. Our study also demonstrates that a decrease in drug release kinetics can result in a decrease in the hepatotoxicity of CLS NP wortmannin. Using two model drugs, the current findings provide the first direct evidence that NP drug release profile is a critical factor in determining the NP therapeutics' efficacy and toxicity in vivo.