The modification of quantum dot probes used for the targeted imaging of his-tagged fusion proteins

Nanomaterials-Based Biosensors for COVID-19 Detection-A Review

This review paper discusses the properties of nanomaterials, namely graphene, molybdenum disulfide, carbon nanotubes, and quantum dots for unique sensing applications. Based on the specific analyte to be detected and the functionalization techniques that are employed, some noteworthy sensors that have been developed are discussed. Further, biocompatible sensors fabricated from these materials capable of detecting specific chemical compounds are also highlighted for COVID-19 detection purposes, which can aid in efficient and reliable sensing as well as timely diagnosis.

Size Fractionation of Fluorescent Graphene Quantum Dots Using a Cross-Flow Membrane Filtration System

Graphene quantum dots (GQDs) have received great attention as optical agents because of their low toxicity, stable photoluminescence (PL) in moderate pH solutions, and size-dependent optical properties. Although many synthetic routes have been proposed for producing GQD solutions, the broad size distribution in GQD solutions limits its use as an efficient optical agent. Here, we present a straightforward method for size fractionation of GQDs dispersed in water using a cross-flow filtration system and a track-etched membrane with cylindrical uniform nanopores. The GQD aqueous suspension, which primarily contained blue-emitting GQDs (B-GQDs) and green-emitting GQDs (G-GQDs), was introduced to the membrane in tangential flow and was fractionated with a constant permeate flow of about 800 L m-2 h-1 bar-1. After filtration, we observed a clear blue PL spectrum from the permeate side, which can be attributed to selective permeation of relatively small B-GQDs. The process provided a separation factor (B-GQDs/G-GQDs) of 0.74. In the cross-flow filtration system, size-dependent permeation through cylindrical nanochannels was confirmed by simulation. Our results demonstrate a feasible method facilitating size fractionation of two-dimensional nanostructures using a cross-flow membrane filtration system. Since membrane filtration is simple, cost-effective, and scalable, our approach can be applied to prepare a large amount of size-controlled GQDs required for high performance opto-electronics and bio-imaging applications.

Electrochemical quantum dots-based magneto-immunoassay for detection of HE4 protein on metal film-modified screen-printed carbon electrodes

A novel enzyme-free electrochemical immunosensor was developed for highly sensitive detection and quantification of human epididymis protein 4 (HE4) in human serum. For the first time, core/shell CdSe/ZnS quantum dots were conjugated with anti-HE4 IgG antibodies for subsequent sandwich-type immunosensing with superparamagnetic microparticles functionalized with anti-HE4 IgG antibodies, which allow rapid and efficient HE4 capture from the sample. Electrochemical detection of anti-HE4 IgG - HE4 - anti-HE4 IgG^CdSe/ZnS immunocomplex was performed by recording the current response of Cd(II) ions, released from dissolved quantum dots at screen-printed carbon electrode (SPCE), modified with mercury or bismuth film. The linear range of the detection was from 20 pM to 40 nM with limit of detection of 12 pM using three times the standard deviation of blank criterion at mercury-film SPCE and from 100 pM to 2 nM with limit of detection of 89 pM at bismuth-film SPCE. Proposed electrochemical immunosensor meets the requirements for fast and sensitive quantification of HE4 biomarker in early stage of ovarian cancer and due to the proper sensitivity and specificity presents a promising alternative to enzyme-based probes used routinely in clinical diagnostics.

Multicolor Functional Carbon Dots via One-Step Refluxing Synthesis

Carbon dots are admirable fluorescent nanomaterials due to their low cost, high photostability, excellent biocompatibility, and environmental friendliness. Most conventional carbon dot fabrication approaches produce single-colored fluorescent material in the preparation process; different methods are therefore required to synthesize distinct carbon dots for specific optical applications. In this study, carbon dots carrying different emission colors are prepared through a one-step refluxing process. The emission of these materials can be well-tuned by sodium hydroxide content in the precursor solution. The carbon dots produced are used as sensing probes based on the spectrofluorometric inner filter effect for target molecule detection. Three sensing categories that combine carbon dots and inner filter effect are demonstrated, including direct, metal nanoparticle-assisted, and enzymatic reaction-supported detection. Caffeine, melamine, and fenitrothion are selected as targets to demonstrate the strategies, respectively. These multifunctional carbon dot-based sensors achieve comparable sensitivity toward analytes with a much more convenient preparation route.

An iminodiacetate-modified conjugated polyelectrolyte for fluorescent labeling of histidine-tagged proteins

An iminodiacetate-modified conjugated polyelectrolyte was used in the fluorescent labeling of hexahistidine-tagged proteins.

His-tag based in situ labelling of progeny viruses for real-time single virus tracking in living cells

Tracking virus infection events in live cells is useful for understanding the mechanism of virus infection, and fluorescent labelling is a critical step. Herein a noninvasive strategy for labelling viruses with His-tags was developed by in situ modifying the cell surface proteins with polypeptides containing His-tags during progeny virus assembly. The His-tagged viruses were further conjugated with Ni²⁺-nitrilotriacetate complex modified quantum dots, and retained their infectivity for real-time single virus tracking in living cells.

Influence of heavy nanocrystals on spermatozoa and fertility of mammals

In recent years, quantum dots (QDs) have been widely used in upcoming nanotechnology-based solar cells, light-emitting diodes and even bioimaging, due to their tunable optical properties and excellent quantum yields. But, such nanostructures are currently constituted by heavy elements which can threat the human health and living environment. Hence, in this work, the in vivo effects of CdTe nanocrystals (NCs) (as one of the promising QDs) on spermatozoa of male mice and subsequently on fertility of female mice were investigated, for the first time. To do this, CdTe NCs were synthesized through an environment-friendly (aqueous-based solution) method. The sperm cells presented a high potential for uptake of the heavy QDs. Meantime, the NCs exhibited concentration-dependent adverse effects on morphology, viability, kinetic characteristics and DNA of the spermatozoa. At low concentration of 0.1μg/mL, the NCs showed a moderate toxicity (~25% reduction in viability and motility of the spermatozoa), while remarkable toxicities were observed at higher concentrations of 1.0-100μg/mL (~67% reduction in viability and motility for 100μg/mL). Furthermore, significant in vitro DNA fragmentation of the spermatozoa was observed at CdTe concentrations ≥10μg/mL. In vivo toxicity of the NCs was found lower than the in vitro toxicity. Nevertheless, the in vivo destructive effects of the NCs still caused ~34% reduction in viability as well as motility and ~5% damages in DNA of male mice spermatozoa. These resulted in ~26% decrease in fertility and gestation of female mice, along with an overall hormone secretion during the pregnancy, and ~39% reduction in viability of pups/pregnant females.

Meta-analysis of cellular toxicity for cadmium-containing quantum dots

Understanding the relationships between the physicochemical properties of engineered nanomaterials and their toxicity is critical for environmental and health risk analysis. However, this task is confounded by material diversity, heterogeneity of published data and limited sampling within individual studies. Here, we present an approach for analysing and extracting pertinent knowledge from published studies focusing on the cellular toxicity of cadmium-containing semiconductor quantum dots. From 307 publications, we obtain 1,741 cell viability-related data samples, each with 24 qualitative and quantitative attributes describing the material properties and experimental conditions. Using random forest regression models to analyse the data, we show that toxicity is closely correlated with quantum dot surface properties (including shell, ligand and surface modifications), diameter, assay type and exposure time. Our approach of integrating quantitative and categorical data provides a roadmap for interrogating the wide-ranging toxicity data in the literature and suggests that meta-analysis can help develop methods for predicting the toxicity of engineered nanomaterials.

Comparison of Toxicity of CdSe: ZnS Quantum Dots on Male Reproductive System in Different Stages of Development in Mice

Background

Quantum dots (QDs) are new types of fluorescent materials for biological labeling. QDs toxicity study is an essential requirement for future clinical applications. Therefore, this study aimed to evaluate cytotoxic effects of CdSe: ZnS QDs on male reproductive system.

Materials and Methods

In this experimental study, the different concentrations of CdSe: ZnS QDs (10, 20 and 40 mg/kg) were injected to 32 male mice (adult group) and 24 pregnant mice (embryo group) on day 8 of gestation. The histological changes of testis and epididymis were studied by a light microscopy, and the number of seminiferous tubules between two groups was compared. One-way analysis of variance (one-way Anova) using the Statistical Package for the Social Sciences (SPSS, SPSS Inc., USA) version 16 were performed for statistical analysis.

Results

In adult group, histological studies of testis tissues showed a high toxicity of CdSe: ZnS in 40 mg/kg dose followed by a decrease in lamina propria; destruction in interstitial tissue; deformation of seminiferous tubules; and a reduction in number of spermatogonia, spermatocytes, and spermatids. However, there was an interesting result in fetal testis development, meaning there was no significant effect on morphology and structure of the seminiferous tubules and number of sperm stem cells. Also histological study of epididymis tissues in both groups (adult and embryo groups) showed no significant effect on morphology and structure of tubule and epithelial cells, but there was a considerable reduction in number of spermatozoa in the lumen of the epididymal duct in 40 mg/kg dose of adult group.

Conclusion

The toxicity of QDs on testicular tissue of the mice embryo and adult are different before and after puberty. Due to lack of research in this field, this study can be an introduction to evaluate the toxicity of QDs on male reproduction system in different stages of development.

Efficient synthesis of rice based graphene quantum dots and their fluorescent properties

We present a facile green approach to synthesize monodisperse graphene quantum dots (GQDs) of sizes 2–6.5 nm using rice grains as a carbon source.

Quantum dots: bright and versatile in vitro and in vivo fluorescence imaging biosensors

Colourful cells and tissues: semiconductor quantum dots and their versatile applications in multiplexed bioimaging research.

Preparation of fluorescent graphene quantum dots from humic acid for bioimaging application

Humic acid as a raw material was applied for the preparation of graphene quantum dots by a one-step hydrothermal method.

Core/shell nanoparticles in biomedical applications

Nanoparticles have several exciting applications in different areas and biomedial field is not an exception of that because of their exciting performance in bioimaging, targeted drug and gene delivery, sensors, and so on. It has been found that among several classes of nanoparticles core/shell is most promising for different biomedical applications because of several advantages over simple nanoparticles. This review highlights the development of core/shell nanoparticles-based biomedical research during approximately past two decades. Applications of different types of core/shell nanoparticles are classified in terms of five major aspects such as bioimaging, biosensor, targeted drug delivery, DNA/RNA interaction, and targeted gene delivery.

Quantum dot-based nanoprobes for in vivo targeted imaging

Fluorescent semiconductor quantum dots (QDs) have attracted tremendous attention over the last decade. The superior optical properties of QDs over conventional organic dyes make them attractive labels for a wide variety of biomedical applications, whereas their potential toxicity and instability in biological environment have puzzled scientific researchers. Much research effort has been devoted to surface modification and functionalization of QDs to make them versatile probes for biomedical applications, and significant progress has been made over the last several years. This review article aims to describe the current state-of-the-art of the synthesis, modification, bioconjugation, and applications of QDs for in vivo targeted imaging. In addition, QD-based multifunctional nanoprobes are also summarized.

'One-pot' synthesis of multifunctional GSH-CdTe quantum dots for targeted drug delivery

A novel quantum dots-based multifunctional nanovehicle (DOX-QD-PEG-FA) was designed for targeted drug delivery, fluorescent imaging, tracking, and cancer therapy, in which the GSH-CdTe quantum dots play a key role in imaging and drug delivery. To exert curative effects, the antineoplastic drug doxorubicin hydrochloride (DOX) was loaded on the GSH-CdTe quantum dots through a condensation reaction. Meanwhile, a polyethylene glycol (PEG) shell was introduced to wrap the DOX-QD, thus stabilizing the structure and preventing clearance and drug release during systemic circulation. To actively target cancer cells and prevent the nanovehicles from being absorbed by normal cells, the nanoparticles were further decorated with folic acid (FA), allowing them to target HeLa cells that express the FA receptor. The multifunctional DOX-QD-PEG-FA conjugates were simply prepared using the 'one pot' method. In vitro study demonstrated that this simple, multifunctional nanovehicle can deliver DOX to the targeted cancer cells and localize the nanoparticles. After reaching the tumor cells, the FA on the DOX-QD-PEG surface allowed folate receptor recognition and increased the drug concentration to realize a higher curative effect. This novel, multifunctional DOX-QD-PEG-FA system shows great potential for tumor imaging, targeting, and therapy.

Quantum dot conjugated S. cerevisiae as smart nanotoxicity indicators for screening the toxicity of nanomaterials

Quantum dot conjugatedS. cerevisiaeas smart nanotoxicity indicators for screening the toxicity of nanomaterials.

Multidentate zwitterionic ligands provide compact and highly biocompatible quantum dots

Hydrophilic functional semiconductor nanocrystals that are also compact provide greatly promising platforms for use in bioinspired applications and are thus highly needed. To address this, we designed a set of metal coordinating ligands where we combined two lipoic acid groups, bis(LA)-ZW, (as a multicoordinating anchor) with a zwitterion group for water compatibility. We further combined this ligand design with a new photoligation strategy, which relies on optical means instead of chemical reduction of the lipoic acid, to promote the transfer of CdSe-ZnS QDs to buffer media. In particular, we found that the QDs photoligated with this zwitterion-terminated bis(lipoic) acid exhibit great colloidal stability over a wide range of pHs, to an excess of electrolytes, and in the presence of growth media and reducing agents, in addition to preserving their optical and spectroscopic properties. These QDs are also stable at nanomolar concentrations and under ambient conditions (room temperature and white light exposure), a very promising property for fluorescent labeling in biology. In addition, the compact ligands permitted metal-histidine self-assembly between QDs photoligated with bis(LA)-ZW and two different His-tagged proteins, maltose binding protein and fluorescent mCherry protein. The remarkable stability of QDs capped with these multicoordinating and compact ligands over a broad range of conditions and at very small concentrations, combined with the compatibility with metal-histidine conjugation, could be very useful for a variety of applications, ranging from protein tracking and ligand-receptor binding to intracellular sensing using energy transfer interactions.

Surface coating of graphene quantum dots using mussel-inspired polydopamine for biomedical optical imaging

Because of the superiority of GQDs (graphene quantum dots) in biomedical imaging, in terms of biocompatibility and toxicity of semiconductor quantum dots, GQDs bring new opportunities for the diagnosis and detection of diseases. In this study, we synthesized photoluminescent (PL) graphene quantum dots (GQDs) through a simple exfoliation and oxidation process, and then coated them with polydopamine (pDA) for enhanced stability in water and low toxicity in vivo. From the results, the GQDs coated with pDA showed an excellent stability of PL intensity. It showed that the PL intensity of noncoated GQDs in PBS solution rapidly decreased with time, resulting in a 45% reduction of the PL intensity for 14 days of incubation in PBS solution. After coating with polydopamine, PL intensities of polydopamine-coated GQDs was maintained more stably for 14 days compared with uncoated GQDs. We have observed the in vitro and in vivo biocompatibility of pDA-coated GQDs in nude mice. The overall observation revealed that pDA-coated GQDs could be used as a long-term optical imaging agent as well as a biocompatible drug carrier.

Conjugation of quantum dots on carbon nanotubes for medical diagnosis and treatment

Cancer is one of the leading causes of death worldwide and early detection provides the best possible prognosis for cancer patients. Nanotechnology is the branch of engineering that deals with the manipulation of individual atoms and molecules. This area of science has the potential to help identify cancerous cells and to destroy them by various methods such as drug delivery or thermal treatment of cancer. Carbon nanotubes (CNT) and quantum dots (QDs) are the two nanoparticles, which have received considerable interest in view of their application for diagnosis and treatment of cancer. Fluorescent nanoparticles known as QDs are gaining momentum as imaging molecules with life science and clinical applications. Clinically they can be used for localization of cancer cells due to their nano size and ability to penetrate individual cancer cells and high-resolution imaging derived from their narrow emission bands compared with organic dyes. CNTs are of interest to the medical community due to their unique properties such as the ability to deliver drugs to a site of action or convert optical energy into thermal energy. By attaching antibodies that bind specifically to tumor cells, CNTs can navigate to malignant tumors. Once at the tumor site, the CNTs enter into the cancer cells by penetration or endocytosis, allowing drug release, and resulting in specific cancer cell death. Alternatively, CNTs can be exposed to near-infrared light in order to thermally destroy the cancer cells. The amphiphilic nature of CNTs allows them to penetrate the cell membrane and their large surface area (in the order of 2600 m²/g) allows drugs to be loaded into the tube and released once inside the cancer cell. Many research laboratories, including our own, are investigating the conjugation of QDs to CNTs to allow localization of the cancer cells in the patient, by imaging with QDs, and subsequent cell killing, via drug release or thermal treatment. This is an area of huge interest and future research and therapy will focus on the multimodality of nanoparticles. In this review, we seek to explore the biomedical applications of QDs conjugated to CNTs, with a particular emphasis on their use as therapeutic platforms in oncology.

The controlled display of biomolecules on nanoparticles: a challenge suited to bioorthogonal chemistry

Interest in developing diverse nanoparticle (NP)-biological composite materials continues to grow almost unabated. This is motivated primarily by the desire to simultaneously exploit the properties of both NP and biological components in new hybrid devices or materials that can be applied in areas ranging from energy harvesting and nanoscale electronics to biomedical diagnostics. The utility and effectiveness of these composites will be predicated on the ability to assemble these structures with control over NP/biomolecule ratio, biomolecular orientation, biomolecular activity, and the separation distance within the NP-bioconjugate architecture. This degree of control will be especially critical in creating theranostic NP-bioconjugates that, as a single vector, are capable of multiple functions in vivo, including targeting, image contrast, biosensing, and drug delivery. In this review, a perspective is given on current and developing chemistries that can provide improved control in the preparation of NP-bioconjugates. The nanoscale properties intrinsic to several prominent NP materials are briefly described to highlight the motivation behind their use. NP materials of interest include quantum dots, carbon nanotubes, viral capsids, liposomes, and NPs composed of gold, lanthanides, silica, polymers, or magnetic materials. This review includes a critical discussion on the design considerations for NP-bioconjugates and the unique challenges associated with chemistry at the biological-nanoscale interface-the liabilities of traditional bioconjugation chemistries being particularly prominent therein. Select bioorthogonal chemistries that can address these challenges are reviewed in detail, and include chemoselective ligations (e.g., hydrazone and Staudinger ligation), cycloaddition reactions in click chemistry (e.g., azide-alkyne cyclyoaddition, tetrazine ligation), metal-affinity coordination (e.g., polyhistidine), enzyme driven modifications (e.g., HaloTag, biotin ligase), and other site-specific chemistries. The benefits and liabilities of particular chemistries are discussed by highlighting relevant NP-bioconjugation examples from the literature. Potential chemistries that have not yet been applied to NPs are also discussed, and an outlook on future developments in this field is given.

High sensitive detection of Cry1Ab protein using a quantum dot-based fluorescence-linked immunosorbent assay

Protein-based detection methods, enzyme-linked immunosorbent assay (ELISA) and lateral flow strip, have been widely used for rapid, spot, and sensitive detection of genetically modified organisms (GMOs). Herein, one novel quantum dot-based fluorescence-linked immunosorbent assay (QD-FLISA) was developed employing quantum dots (QDs) as the fluorescent marker for the detection of the Cry1Ab protein in MON810 maize. The end-point fluorescent detection system was carried out using QDs conjugated with goat anti-rabbit secondary antibody. The newly developed Cry1Ab QD-FLISA assay was highly specific to the Cry1Ab protein and had no cross-reactivity with other target proteins, such as Cry2Ab, Cry1F, and Cry3Bb. The quantified linearity was achieved in the value range of 0.05-5% (w/w). The limits of detection (LOD) and quantification (LOQ) of the QD-FLISA were 2.956 and 9.854 pg/mL, respectively, which were more sensitive than the conventional sandwich ELISA method. All of the results indicated that QD-FLISA was a highly specific and sensitive method for the monitoring of Cry1Ab in GMOs.

Aqueous phase synthesis of CdTe quantum dots for biophotonics

Over the past few years, CdTe quantum dots have been demonstrated as powerful probes for biophotonics applications. The aqueous phase synthesis technique remains the best approach to make high quality CdTe QDs in a single-pot process. CdTe QDs prepared directly in the aqueous phase can have quantum yield as high as 80%. In addition, the surface of CdTe QDs prepared using the aqueous phase technique is functionalized with reactive groups that enable them to be directly conjugated with specific ligands for targeted delivery and sensing. In this contribution, we review recent progress in fabricating aqueous CdTe QDs and exploiting their optical properties in novel approaches to biomedical imaging and sensing applications.

Compact and versatile nickel-nitrilotriacetate-modified quantum dots for protein imaging and Förster resonance energy transfer based assay

The generation of compact quantum dots (QDs) probes is of critical importance for visualizing molecular interaction occurring in biological context, particularly when using the Förster resonance energy transfer (FRET) approach. This Article reports novel water-soluble compact CdSe/ZnS QDs prepared by ligand exchange reaction using thiolated nitrilotriacetate (NTA). The resulting NTA-QDs revealed higher stability and remarkable conjugation efficiency compared to the other QDs prepared with different ligands by using the ligand exchange method. The Ni-NTA group is a well-known binding moiety for the detection and purification of oligohistidine-tagged recombinant proteins. We demonstrated that NiNTA-QDs prepared by Ni(2+) complexation exhibited highly specific binding ability toward 6-histidine (His)-tagged peptides present in various experimental conditions (buffer solution, agarose beads, and HEK cells). Importantly, the compact NiNTA-QDs serve as an efficient FRET donor. These results suggest that the stable and highly selective multifunctional NTA-QDs can be useful for labeling and tracking molecular interactions within biological context.

Immobilization of lactobionic acid on the surface of cadmium sulfide nanoparticles and their interaction with hepatocytes

In the current study, beta-galactose-carrying lactobionic acid (LA) was conjugated on the surface of mercaptoacetic acid-coated cadmium sulfide nanoparticles (CSNPs) to ensure specific recognition of liver cells (hepatocytes) and to enhance biocompatibility. Maltotrionic acid-coated CSNPs (MCSNPs) were also prepared for use as a control. The results showed that LA-immobilized CSNPs (LCSNPs) were selectively and rapidly internalized into hepatocytes and emitted more intense fluorescence images as well as demonstrated increased biocompatible behavior in vitro than those of CSNPs and MCSNPs. Furthermore, the uptake amount of LCSNPs into hepatocytes was higher than that of CSNPs and MCSNPs. All these results indicate that LCSNPs may find ever-growing applications in biological labels and detection or contrast agents in life science and medical diagnostics.

Multifunctional Nanoparticles as Biocompatible Targeted Probes for Human Cancer Diagnosis and Therapy

The use of nanoparticles in biological application has been rapidly advancing toward practical applications in human cancer diagnosis and therapy. Upon linking the nanoparticles with biomolecules, they can be used to locate cancerous area as well as for traceable drug delivery with high affinity and specificity. In this review, we discuss the engineering of multifunctional nanoparticle probes and their use in bioimaging and nanomedicine.