The gene-expression and phenotypic response of hFOB 1.19 osteoblasts to surface-modified titanium and zirconia

Preparation and Characterization of Nanofiber Coatings on Bone Implants for Localized Antimicrobial Activity Based on Sustained Ion Release and Shape-Preserving Design

Titanium (Ti), as a hard tissue implant, is facing a big challenge for rapid and stable osseointegration owing to its intrinsic bio-inertness. Meanwile, surface-related infection is also a serious threat. In this study, large-scale quasi-vertically aligned sodium titanate nanowire (SNW) arrayed coatings incorporated with bioactive Cu2+ ions were fabricated through a compound process involving acid etching, hydrothermal treatment (HT), and ion exchange (IE). A novel coating based on sustained ion release and a shape-preserving design is successfully obtained. Cu2+ substituted Na+ in sodium titanate lattice to generate Cu-doped SNW (CNW), which maintains the micro-structure and phase components of the original SNW, and can be efficiently released from the structure by immersing them in physiological saline (PS) solutions, ensuring superior long-term structural stability. The synergistic effects of the acid etching, bidirectional cogrowth, and solution-strengthening mechanisms endow the coating with higher bonding strengths. In vitro antibacterial tests demonstrated that the CNW coatings exhibited effective good antibacterial properties against both Gram-positive and Gram-negative bacteria based on the continuous slow release of copper ions. This is an exciting attempt to achieve topographic, hydrophilic, and antibacterial activation of metal implants, demonstrating a paradigm for the activation of coatings without dissolution and providing new insights into insoluble ceramic-coated implants with high bonding strengths.

Characterization of hFOB 1.19 Cell Line for Studying Zn-Based Degradable Metallic Biomaterials

In vitro testing is the first important step in the development of new biomaterials. The human fetal osteoblast cell line hFOB 1.19 is a very promising cell model; however, there are vast discrepancies in cultivation protocols, especially in the cultivation temperature and the presence of the selection reagent, geneticin (G418). We intended to use hFOB 1.19 for the testing of Zn-based degradable metallic materials. However, the sensitivity of hFOB 1.19 to zinc ions has not yet been studied. Therefore, we compared the toxicity of zinc towards hFOB 1.19 under different conditions and compared it with that of the L929 mouse fibroblast cell line. We also tested the cytotoxicity of three types of Zn-based biomaterials in two types of media. The presence of G418 used as a selection reagent decreased the sensitivity of hFOB 1.19 to Zn2+. hFOB 1.19 cell line was more sensitive to Zn2+ at elevated (restrictive) temperatures. hFOB 1.19 cell line was less sensitive to Zn2+ than L929 cell line (both as ZnCl2 and extracts of alloys). Therefore, the appropriate cultivation conditions of hFOB 1.19 during biomaterial testing should be chosen with caution.

Enhanced Proliferation and Differentiation of Human Osteoblasts by Remotely Controlled Magnetic-Field-Induced Electric Stimulation Using Flexible Substrates

With the progressive aging of the population, bone fractures are an increasing major health concern. Diverse strategies are being studied to reduce the recovery times using nonaggressive treatments. Electrical stimulation (either endogenous or externally applied electric pulses) has been found to be effective in accelerating bone cell proliferation and differentiation. However, the direct insertion of electrodes into tissues can cause undesirable inflammation or infection reactions. As an alternative, magnetoelectric heterostructures (wherein magnetic fields are applied to induce electric polarization) could be used to achieve electric stimulation without the need for implanted electrodes. Here, we develop a magnetoelectric platform based on flexible kapton/FeGa/P(VDF-TrFE) (flexible substrate/magnetostrictive layer/ferroelectric layer) heterostructures for remote magnetic-field-induced electric field stimulation of human osteoblast cells. We show that the use of flexible supports overcomes the clamping effects that typically occur when analogous magnetoelectric structures are grown onto rigid substrates (which preclude strain transfer from the magnetostrictive to the ferroelectric layers). The study of the diverse proliferation and differentiation markers evidence that in all the stages of bone formation (cell proliferation, extracellular matrix maturation, and mineralization), the electrical stimulation of the cells results in a remarkably better performance. The results pave the way for novel strategies for remote cell stimulation based on flexible platforms not only in bone regeneration but also in many other applications where electrical cell stimulation may be beneficial (e.g., neurological diseases or skin regeneration).

Biological effects of gamma-ray sterilization on 3 mol% yttria-stabilized tetragonal zirconia polycrystal: An in vitro study

STATEMENT OF PROBLEM

Selecting the sterilization method is important because sterilization can alter the surface chemistry of implant materials, including zirconia, and influence their cellular biocompatibility. Studies on the biological effects of sterilization on implant materials are lacking.

PURPOSE

The purpose of this in vitro study was to evaluate the biocompatibility of gamma-ray irradiated 3 mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) compared with unirradiated titanium, 3Y-TZP, and pure gold.

MATERIAL AND METHODS

Disk-shaped specimens each of commercially pure grade 4 titanium, 3Y-TZP, gamma-rayed 3Y-TZP, and pure gold were prepared and evaluated for osteogenic potential by using a clonal murine cell line of immature osteoblasts derived from mice (MC3T3-E1 cells). The surface topography (n=3), chemical analysis of the disks (n=3), and cell morphology cultured on these surfaces were examined using scanning electron microscopy, confocal laser scanning microscopy, and energy dispersive spectroscopy. Cellular biocompatibility was analyzed for 1 and 3 days after seeding. Cell adhesion and spreading were evaluated using confocal laser scanning microscopy (n=3). Cell proliferation was evaluated using methyl thiazolyl tetrazolium assay (n=3). Kruskal-Wallis and Bonferroni corrections were used to evaluate the statistical significance of the intergroup differences (α=.05).

RESULTS

Gamma-ray sterilization of 3Y-TZP showed significantly higher surface roughness compared with titanium and gold (P<.002). On day 1, the proliferation and adhesion of MC3T3-E1 cells cultured on gamma-rayed 3Y-TZP were significantly higher than those cultured on gold (P<.05); however, cell spreading was significantly lower than that of titanium on days 1 and 3 (P<.05). On day 3, cell proliferation of gamma-rayed 3Y-TZP was significantly lower than that of unirradiated 3Y-TZP (P<.05). Cell adhesion of gamma-rayed 3Y-TZP was slightly lower than that of zirconia and titanium but without significant difference (P>.05).

CONCLUSIONS

Gamma-rayed zirconia exhibited increased surface roughness compared with titanium and significantly decreased bioactivity compared with titanium and zirconia. The use of gamma-ray sterilization on zirconia is not promising regarding biocompatibility, and the effect of this sterilization method on implant materials warrants further investigation.

Silver-releasing bioactive glass nanoparticles for infected tissue regeneration

Bacterial infections represent a formidable challenge, often leaving behind significant bone defects post-debridement and necessitating prolonged antibiotic treatments. The rise of antibiotic-resistant bacterial strains further complicates infection management. Bioactive glass nanoparticles have been presented as a promising substitute for bone defects and as carriers for therapeutic agents against microorganisms. Achieving consistent incorporation of ions into BGNs has proven challenging and restricted to a maximum ion concentration, especially when reducing the particle size. This study presents a notable achievement in the synthesis of 10 nm-sized Ag-doped bioactive glass nanoparticles (Ag-BGNs) using a modified yet straightforward Stöber method. The successful incorporation of essential elements, including P, Ca, Al, and Ag, into the glass structure at the intended concentrations (i.e., CaO wt% above 20 %) was confirmed by EDS, signifying a significant advancement in nanoscale biomaterial engineering. While exhibiting a spherical morphology and moderate dispersity, these nanoparticles tend to form submicron-sized aggregates outside of a solution state. The antibacterial effectiveness against MRSA was established across various experimental conditions, with Ag-BGNs effectively sterilizing planktonic bacteria without the need for antibiotics. Remarkably, when combined with oxacillin or fosfomycin, Ag-BGNs demonstrated a potent synergistic effect, restoring antibacterial capabilities against MRSA strains resistant to these antibiotics when used alone. Ag-BGNs exhibited potential in promoting human mesenchymal stromal cell proliferation, inducing the upregulation of osteoblast gene markers, and significantly contributing to bone regeneration in mice. This innovative synthesis protocol holds substantial promise for the development of biomaterials dedicated to the regeneration of infected tissue.

Synergistic Enhancement of Protein Recruitment and Retention via Implant Surface Microtopography and Superhydrophilicity in a Computational Fluid Dynamics Model

The exact mechanisms by which implant surface properties govern osseointegration are incompletely understood. To gain insights into this process, we examined alterations in protein and blood recruitment around screw implants with different surface topographies and wettability using a computational fluid dynamics (CFD) model. Compared with a smooth surface, a microrough implant surface reduced protein infiltration from the outer zone to the implant thread and interface zones by over two-fold. However, the microrough implant surface slowed blood flow in the interface zone by four-fold. As a result, compared with the smooth surface, the microrough surface doubled the protein recruitment/retention index, defined as the mass of proteins present in the area per unit time. Converting implant surfaces from hydrophobic to superhydrophilic increased the mass of protein infiltration 2-3 times and slowed down blood flow by up to two-fold in the implant vicinity for both smooth and microrough surfaces. The protein recruitment/retention index was highest at the implant interface when the implant surface was superhydrophilic and microrough. Thus, this study demonstrates distinct control of the mass and speed of protein and blood flow through implant surface topography, wettability, and their combination, significantly altering the efficiency of protein recruitment. Although microrough surfaces showed both positive and negative impacts on protein recruitment over smooth surfaces, superhydrophilicity was consistently positive regardless of surface topography.

Nanostructured Ti-13Nb-13Zr alloy for implant application-material scientific, technological, and biological aspects

In dentistry, the most commonly used implant materials are CP-Titanium Grade 4 and Ti-6Al-4V ELI, possessing comparably high Young's modulus (>100 GPa). In the present study, the second-generation titanium alloy Ti-13Nb-13Zr is investigated with respect to the production of advanced dental implant systems. This should be achieved by the fabrication of long semi-finished bars with high strength and sufficient ductility to allow the automated production of small implants at low Young's modulus (<80 GPa) to minimize stress shielding, bone resorption, and gap formation between the bone and implant. In addition, bacterial colonization is to be reduced, and bone adhesion is to be enhanced by adjusting the microstructure. To do so, a dedicated thermo-mechanical treatment for Ti-13Nb-13Zr has been developed. This includes the adaption of equal channel angular swaging, a modern process of severe plastic deformation to continuously manufacture nanostructured materials, to Ti-13Nb-13Zr and short-time recrystallization and ageing treatments. In particular, two-pass equal channel angular swaging at a deformation temperature of 150°C and a counterpressure of 8 MPa has successfully been used to avoid shear band formation during deformation and to produce long Ti-13Nb-13Zr bars of 8 mm diameter. During recrystallization treatment at 700°C for 10 min followed by water quenching, a sub-micron-size primary α-phase in a matrix of α″-phase was developed. Subsequent ageing at 500°C for 1 h leads to martensite decomposition and, thus, to a homogeneously nanostructured microstructure of α- and β-phase with substructures smaller than 200 nm. The resulting mechanical properties, especially the ultimate tensile strength of more than 990 MPa, fulfill the requirements of ASTM F1713 at Young's modulus of 73 GPa. Biological investigations show promising results in reducing bacterial biofilm formation and increased cell proliferation of osteoblasts compared to CP-Titanium Grade 4 and Ti-6Al-4V ELI, especially, if etched surfaces are applied.

Vapor-Induced Pore-Forming Atmospheric-Plasma-Sprayed Zinc-, Strontium-, and Magnesium-Doped Hydroxyapatite Coatings on Titanium Implants Enhance New Bone Formation-An In Vivo and In Vitro Investigation

OBJECTIVES

Titanium implants are regarded as a promising treatment modality for replacing missing teeth. Osteointegration and antibacterial properties are both desirable characteristics for titanium dental implants. The aim of this study was to create zinc (Zn)-, strontium (Sr)-, and magnesium (Mg)-multidoped hydroxyapatite (HAp) porous coatings, including HAp, Zn-doped HAp, and Zn-Sr-Mg-doped HAp, on titanium discs and implants using the vapor-induced pore-forming atmospheric plasma spraying (VIPF-APS) technique.

METHODS

The mRNA and protein levels of osteogenesis-associated genes such as collagen type I alpha 1 chain (COL1A1), decorin (DCN), osteoprotegerin (TNFRSF11B), and osteopontin (SPP1) were examined in human embryonic palatal mesenchymal cells. The antibacterial effects against periodontal bacteria, including Porphyromonas gingivalis and Prevotella nigrescens, were investigated. In addition, a rat animal model was used to evaluate new bone formation via histologic examination and micro-computed tomography (CT).

RESULTS

The ZnSrMg-HAp group was the most effective at inducing mRNA and protein expression of TNFRSF11B and SPP1 after 7 days of incubation, and TNFRSF11B and DCN after 11 days of incubation. In addition, both the ZnSrMg-HAp and Zn-HAp groups were effective against P. gingivalis and P. nigrescens. Furthermore, according to both in vitro studies and histologic findings, the ZnSrMg-HAp group exhibited the most prominent osteogenesis and concentrated bone growth along implant threads.

SIGNIFICANCE

A porous ZnSrMg-HAp coating using VIPF-APS could serve as a novel technique for coating titanium implant surfaces and preventing further bacterial infection.

Bioglass obtained via one-pot synthesis as osseointegrative drug delivery system

Osseointegration is a fundamental process during which implantable biomaterial integrates with host bone tissue. The surgical procedure of biomaterial implantation is highly associated with the risk of bacterial infection. Thus, the research continues for biodegradable bone void fillers which are able to stimulate the bone tissue regeneration and locally deliver the antibacterial agent. Herein, we obtained bifunctional bioglass (BG) using novel, preoptimized, rapid one-pot synthesis. Following the ISO Standards, the influence of the obtained BG on osteoblast-mediated phenomena, such as osteoconduction and osteoinduction was assessed and compared to two commercial materials: bioactive glass powder 45S and bioactive glass powder 85S. Direct-contact tests revealed osteoblast adhesion to BG particles; whereas, tests on extracts confirmed high viability of cells incubated with BG extract. Analyses of gene expression, alkaline phosphatase activity, and calcium phosphates deposition confirmed the stimulation of early and late stages of osteoblast differentiation and mineralization. Additionally, an extended evaluation of intracellular calcium fluctuations revealed a possible correlation between osteoblast calcium uptake and extracellular matrix mineralization. Moreover, proposed bioglass exhibited satisfactory doxycycline adsorption capacity and release profile. The obtained results confirmed the bifunctionality of the proposed BG and indicated its potential as osseointegrative bone drug delivery system.

Magnetic nanocomposites for magneto-promoted osteogenesis: from simulation auxiliary design to experimental validation

Magnetically actuated mechanical stimulation, as a novel form of intelligent responsive force stimulation, has a great potential for remote spatiotemporal regulation of a variety of life processes. Hence, the optimal design of magnetic nanomaterials for generating magneto-mechanical stimuli becomes an important driving force in the development of magneto-controlled biotherapy. This study aims to clarify the general rule that the surface modification amount of magnetic nanoparticles (NPs) affects the biological behavior (e.g., cell adhesion, proliferation and differentiation) of pre-osteoblast cells. First of all, course-grained molecular dynamics simulations predict that 23.3% graft modification of the NPs can maximize the heterogeneity of the dynamics of the polymer matrix, which may generate enhanced mechanical stimuli. Then, experimentally, iron oxide (IO) NPs grafted with different amounts of poly(γ-benzyl-L-glutamate) (PBLG) were prepared to obtain homogeneous magnetic nanocomposites with improved mechanical properties. Further in vitro cell experiments demonstrate that the grafting amounts of 21.46% and 32.34% of PBLG on IO NPs are the most beneficial for the adhesion and osteogenic differentiation of cells. Simultaneously, the maximized upregulation of the Piezo1 gene indicates that the cells receive the strongest magneto-mechanical stimuli. The consistent conclusion of the experiments and simulations indicates that 20-30% PBLG grafted on the IO surface could maximize the ability of magnetic stimuli to regulate the biological behavior of the cells, which validates the feasibility of simulation auxiliary material design and is of great importance for promoting the application of magneto-controlled biotherapy in bioengineering and biomedicine.

Bacillus subtilis Modulated the Expression of Osteogenic Markers in a Human Osteoblast Cell Line

Several in vivo trials have previously demonstrated the beneficial effects of the administration of various probiotic forms on bone health. In this study, we explored the potency of two probiotics, Bacillus subtilis and Lactococcus lactis, alone or in combination with vitamin D (VD), to modulate the transcription of genes involved in the ossification process in a human osteoblast cell line. Genes that mark the "osteoblast proliferation phase", such as RUNX2, TGFB1, and ALPL, "extracellular matrix (ECM) maturation", such as SPP1 and SPARC, as well as "ECM mineralization", such as BGN, BGLAP, and DCN, were all highly expressed in osteoblasts treated with B. subtilis extract. The observed increase in the transcription of the ALPL mRNA was further in agreement with its protein levels as observed by Western blot and immunofluorescence. Therefore, this higher transcription and translation of alkaline phosphatase in osteoblasts treated with the B. subtilis extract, indicated its substantial osteogenic impact on human osteoblasts. Although both the probiotic extracts showed no osteogenic synergy with VD, treatment with B. subtilis alone could increase the ECM mineralization, outperforming the effects of L. lactis and even VD. Furthermore, these results supported the validity of employing probiotic extracts rather than live cells to investigate the effects of probiotics in the in vitro systems.

Polyhydroxybutyrate-starch/carbon nanotube electrospun nanocomposite: A highly potential scaffold for bone tissue engineering applications

Blend nanofibers composed of synthetic and natural polymers with carbon nanomaterial, have a great potential for bone tissue engineering. In this study, the electrospun nanocomposite scaffolds based on polyhydroxybutyrate(PHB)-Starch-multiwalled carbon nanotubes (MWCNTs) were fabricated with different concentrations of MWCNTs including 0.5, 0.75 and 1 wt%. The synthesized scaffolds were characterized in terms of morphology, porosity, thermal and mechanical properties, biodegradation, bioactivity, and cell behavior. The effect of the developed structures on MG63 cells was determined by real-time PCR quantification of collagen type I, osteocalcin, osteopontin and osteonectin genes. Our results showed that the scaffold containing 1 wt% MWCNTs presented the lowest fiber diameter (124 ± 44 nm) with a porosity percentage above 80 % and the highest tensile strength (24.37 ± 0.22 MPa). The addition of MWCNTs has a positive effect on surface roughness and hydrophilicity. The formation of calcium phosphate sediments on the surface of the scaffolds after immersion in SBF is observed by SEM and verified by EDS and XRD analysis.MG63 cells were well cultured on the scaffold containing MWCNTs and presented more cell viability, ALP secretion, calcium deposition and gene expression compared to the scaffolds without MWCNTs. The PHB-starch-1wt.%MWCNTs scaffold can be considerable for studies of supplemental bone tissue engineering applications.

Submicron-Sized In Situ Osmotic Pressure Sensors for In Vitro Applications in Biology

Physical forces are important cues in determining the development and the normal function of biological tissues. While forces generated by molecular motors have been widely studied, forces resulting from osmotic gradients have been less considered in this context. A possible reason is the lack of direct in situ measurement methods that can be applied to cell and organ culture systems. Herein, novel kinds of resonance energy transfer (FRET)-based liposomal sensors are developed, so that their sensing range and sensitivity can be adjusted to satisfy physiological osmotic conditions. Several types of sensors are prepared, either based on polyethylene glycol- (PEG)ylated liposomes with steric stabilization and stealth property or on crosslinked liposomes capable of enduring relatively harsh environments for liposomes (e.g., in the presence of biosurfactants). The sensors are demonstrated to be effective in the measurement of osmotic pressures in pre-osteoblastic in vitro cell culture systems by means of FRET microscopy. This development paves the way toward the in situ sensing of osmotic pressures in biological culture systems.

Bone surface mimicked PDMS membranes stimulate osteoblasts and calcification of bone matrix

Cellular microenvironments play a crucial role in cell behavior. In addition to the biochemical cues present in the microenvironments, biophysical and biomechanical properties on surfaces have an impact on cellular functionality and eventually cellular fate. Effects of surface topography on cell behavior are being studied extensively in the literature. However, these studies often try to replicate topographical features of tissue surfaces by using techniques such as chemical etching, photolithography, and electrospinning, which may result in the loss of crucial micro- and nano- features on the tissue surfaces such as bone. This study investigates the topographical effects of bone surface by transferring its surface features onto polydimethylsiloxane (PDMS) membranes using soft lithography from a bovine femur. Our results have shown that major features on bone surfaces were successfully transferred onto PDMS using soft lithography. Osteoblast proliferation and calcification of bone matrix have significantly increased along with osteoblast-specific differentiation and maturation markers such as osteocalcin (OSC), osterix (OSX), collagen type I alpha 1 chain (COL1A1), and alkaline phosphatase (ALP) on bone surface mimicked (BSM) PDMS membranes in addition to a unidirectional alignment of osteoblast cells compared to plain PDMS surfaces. This presented bone surface mimicking method can provide a versatile native-like platform for further investigation of intracellular pathways regarding osteoblast growth and differentiation.

Surface Structure of Zirconia Implants: An Integrative Review Comparing Clinical Results with Preclinical and In Vitro Data

Background: The purpose of this review was to analyze and correlate the findings for zirconia implants in clinical, preclinical and in vitro cell studies in relation to surface structure. Methods: Electronic searches were conducted to identify clinical, preclinical and in vitro cell studies on zirconia implant surfaces. The primary outcomes were mean bone loss (MBL) for clinical studies, bone-to-implant contact (BIC) and removal torque (RT) for preclinical studies and cell spreading, cell proliferation and gene expression for cell studies. The secondary outcomes included comparisons of data found for those surfaces that were investigated in all three study types. Results: From 986 screened titles, 40 studies were included for data extraction. In clinical studies, only micro-structured surfaces were investigated. The lowest MBL was reported for sandblasted and subsequently etched surfaces, followed by a sinter and slurry treatment and sandblasted surfaces. For BIC, no clear preference of one surface structure was observable, while RT was slightly higher for micro-structured than smooth surfaces. All cell studies showed that cell spreading and cytoskeletal formation were enhanced on smooth compared with micro-structured surfaces. Conclusions: No correlation was observed for the effect of surface structure of zirconia implants within the results of clinical, preclinical and in vitro cell studies, underlining the need for standardized procedures for human, animal and in vitro studies.

The response of Mesenchymal Stem Cells to endodontic materials

An endodontic material must be minimally harmful to stem cells since they are essential, thanks to their capacity for cell proliferation, self-renewal, and differentiation. For this reason, in this in vitro study, the cell viability and the expression of genes involved in cell plasticity and differentiation were investigated in stem cells recovered from human dental pulp (hDPSCs) that were in contact with four endodontic materials (Endofill, MTA, Pulp Canal Sealer, and Sealer 26). The viability of HDPSCs was assessed by MTT and trypan blue exclusion assays. PCR evaluated cellular plasticity by determining the CD34, CD45, Nestin, CD105, Nanog, and OCT4 expressions. The effect on cell differentiation was determined by RT-PCR expression of the RUNX2, ALP, OC/BGLAP, and DMP1 genes. The data were analyzed using ANOVA with Bonferroni correction (p <0.05). Pulp Canal Sealer and Endofill decreased cell viability after 48 hours (p <0.001). MTA and Sealer 26 did not disrupt cell viability (p> 0.05). When cultivated in the presence of MTA and Sealer 26, hDPSCs expressed Nestin, CD105, NANOG, and OCT-4 and did not express CD34 and CD45. MTA and Sealer 26 interfered with DMP1, OC/BGLAP and RUNX2 expressions (p <0.05) but did not change ALP gene expression (p> 0.05). MTA and Sealer 26 showed biological compatibility in the presence of hDPSCs.

Using a two-step method of surface mechanical attrition treatment and calcium ion implantation to promote the osteogenic activity of mesenchymal stem cells as well as biomineralization on a β-titanium surface

Combination of the SMAT technique and Ca-ion implantation produced a β-titanium alloy with a bioactive surface layer, which was proved to effectively promote the osteogenic activity of MSCs and Ca–P mineral deposition in vitro.

Classification and Properties of Dental Zirconia as Implant Fixtures and Superstructures

Various types of zirconia are widely used for the fabrication of dental implant superstructures and fixtures. Zirconia-alumina composites, such as ATZ and NanoZR, are adequate for implant fixtures because they have excellent mechanical strength in spite of insufficient esthetic properties. On the other hand, yttria-stabilized zirconia has been used for implant superstructures because of sufficient esthetic properties. They are classified to 12 types with yttria content, monochromatic/polychromatic, uniform/hybrid composition, and monolayer/multilayer. Zirconia with a higher yttria content has higher translucency and lower mechanical strength. Fracture strength of superstructures strongly depends on the strength on the occlusal contact region. It suggests that adequate zirconia should be selected as the superstructure crown, depending on whether strength or esthetics is prioritized. Low temperature degradation of zirconia decreases with yttria content, but even 3Y zirconia has a sufficient durability in oral condition. Although zirconia is the hardest dental materials, zirconia restorative rarely subjects the antagonist teeth to occlusal wear when it is mirror polished. Furthermore, zirconia has less bacterial adhesion and better soft tissue adhesion when it is mirror polished. This indicates that zirconia has advantageous for implant superstructures. As implant fixtures, zirconia is required for surface modification to obtain osseointegration to bone. Various surface treatments, such as roughening, surface activation, and coating, has been developed and improved. It is concluded that an adequately selected zirconia is a suitable material as implant superstructures and fixtures because of mechanically, esthetically, and biologically excellent properties.

Skeletal microenvironment system utilising bovine bone scaffold co-cultured with human osteoblasts and osteoclast-like cells

A three-dimensional ex vivo bone cell culture system mimicking the skeletal system is useful for bone tissue engineering and as drug discovery platforms. The present study aimed to establish a three-dimensional skeletal culture system using native bovine bone scaffolds and human bone cells. Bovine bone scaffolds were cultured with human foetal osteoblasts 1.19 and human peripheral blood mononuclear cells for 21 days under standard culture conditions. The following groups were established: Decalcified unseeded bone scaffold (DUBS) as baseline control, decalcified seeded bone scaffold (DSBS) to mimic osteoporosis condition and undecalcified seeded bone scaffold to mimic normal condition. The scaffold's porosity and cell attachment on the scaffolds were determined using scanning electron microscopy. Histological evaluation was used to examine changes in trabecular bone structure. Dual-energy X-ray absorptiometry analysis was performed to determine the bone mineral density (BMD) and bone mineral content (BMC) of the scaffolds. A compression test was performed to examine the total biomechanical strength of the scaffolds. The trabecular thickness and number increased, while the trabecular separationwas reduced slightly in DSBS than in DUBS (P>0.05). The BMD and BMC increased significantly (P<0.05), while the compressive strength only increased slightly in DSBS than in DUBS (P>0.05). In conclusion, the ex vivo skeletal microenvironment comprising native bovine bone scaffolds seeded with bone cells is structurally, functionally and mechanically comparable with natural bone. This system may be used as a platform to understand bone physiology and screen for potential drug candidates.

Rapid structural regulation, apatite-inducing mechanism and in vivo investigation of microwave-assisted hydrothermally treated titania coating

Owing to the poor bioactivity of microarc oxidation (MAO) coating and the rapid activation ability of the microwave hydrothermal (MH) technique, MH treatment was applied to optimize the in vivo interface status between MAO-treated titanium and bone. In this study, consequently, new outermost layers were prepared using hydroxyapatite (HA) nanorods, HA submicron pillars or sodium titanate nanosheets. The results revealed that the NaOH concentration significantly influenced the surface structure and phase constitution of the MAO samples. Moreover, on enhancing the NaOH concentration, the number of HA phases was decreased. Further, the influence of the NaOH concentration on the interfacial bonding strength was insignificant for concentrations ≤0.5 mol L⁻¹. Transmission electron microscopy (TEM) analysis showed that the induction of apatite was accompanied by the dissolution of the HA crystals and there was excellent crystallographic matching with the HA crystals. The in vitro and in vivo analyses revealed that the MH-treated MAO sample with the HA nanorods possessed superior apatite-formation ability and osseointegration, including a small amount of soft tissue and optimal bone–implant interfacial bonding force, thus signifying strong potential for the optimization of the bone–implant interfacial status.

In this work, the micro/nano scale structures of HA nanorods integrated on a titanium were prepared using MAO and MH treatment. The in vivo results indicate that HA crystals play a crucial role in the improvement of the osseointegration.

Electroless Palladium-Coated Polymer Scaffolds for Electrical Stimulation of Osteoblast-Like Saos-2 Cells

Three-dimensional porous scaffolds offer some advantages over conventional treatments for bone tissue engineering. Amongst all non-bioresorbable scaffolds, biocompatible metallic scaffolds are preferred over ceramic and polymeric scaffolds, as they can be used as electrodes with different electric field intensities (or voltages) for electric stimulation (ES). In the present work we have used a palladium-coated polymeric scaffold, generated by electroless deposition, as a bipolar electrode to electrically stimulate human osteoblast-like Saos-2 cells. Cells grown on palladium-coated polyurethane foams under ES presented higher proliferation than cells grown on foams without ES for up to 14 days. In addition, cells grown in both conditions were well adhered, with a flat appearance and a typical actin cytoskeleton distribution. However, after 28 days in culture, cells without ES were filling the entire structure, while cells under ES appeared rounded and not well adhered, a sign of cell death onset. Regarding osteoblast differentiation, ES seems to enhance the expression of early expressed genes. The results suggest that palladium-coated polyurethane foams may be good candidates for osteoblast scaffolds and demonstrate that ES enhances osteoblast proliferation up to 14 days and upregulate expression genes related to extracellular matrix formation.

Preparation of highly wettable coatings on Ti-6Al-4V ELI alloy for traumatological implants using micro-arc oxidation in an alkaline electrolyte

Pulsed micro-arc oxidation (MAO) in a strongly alkaline electrolyte (pH > 13), consisting of Na₂SiO₃⋅9H₂O and NaOH, was used to form a thin porous oxide coating consisting of two layers differing in chemical and phase composition. The unique procedure, combining MAO and removal of the outer layer by blasting, enables to prepare a coating suitable for application in temporary traumatological implants. A bilayer formed in an alkaline electrolyte environment during the application of MAO enables the formation of a wear-resistant layer with silicon incorporated in the oxide phase. Following the removal of the outer rutile-containing porous layer, the required coating properties for traumatological applications were determined. The prepared surfaces were characterized by scanning electron microscopy, X-ray diffraction patterns, X-ray photoelectron spectroscopy, atomic force microscopy and contact angle measurements. Cytocompatibility was evaluated using human osteoblast-like Saos-2 cells. The newly-developed surface modifications of Ti–6Al–4V ELI alloy performed satisfactorily in all cellular tests in comparison with MAO-untreated alloy and standard tissue culture plastic. High cell viability was supported, but the modifications allowed only relatively slow cell proliferation, and showed only moderate osseointegration potential without significant support for matrix mineralization. Materials with these properties are promising for utilization in temporary traumatological implants.

Fabrication of ultrahigh-molecular-weight polyethylene porous implant for bone application

Porous implants play a crucial role in allowing ingrowth of host connective tissue and thereby help in keeping the implant in its place. With the aim of mimicking the microstructure of natural extracellular matrix, ultrahigh-molecular-weight polyethylene (UHMWPE) porous samples with a desirable pore size distribution were developed by combining thermally induced phase separation and salt leaching techniques. The porous UHMWPE samples consisted of a nanofibrous UHMWPE matrix with a fibre diameter smaller than 500 nm, highly interconnected, with a controllable pore diameter from nanoscale to 300 µm. Moreover, a porous UHMWPE sample was also developed as a continuous and homogeneous coating onto the UHMWPE dense sample. The dense/porous UHMWPE sample supported human foetal osteoblast 1.19 cell line proliferation and differentiation, indicating the potential of porous UHMWPE with a desirable pore size distribution for bone application. An osseointegration model in the sheep revealed substantial bone formation within the pore layer at 12 weeks via SEM evaluation. Ingrown bone was more closely opposed to the pore wall when compared to the dense UHMWPE control. These results indicate that dense/porous UHMWPE could provide improved osseointegration while maintaining the structural integrity necessary for load-bearing orthopaedic application.

Gaucher disease-associated alterations in mesenchymal stem cells reduce osteogenesis and favour adipogenesis processes with concomitant increased osteoclastogenesis

Gaucher disease (GD) is caused by pathogenic mutations in GBA1, the gene that encodes the lysosomal enzyme β-glucocerebrosidase. Until now, treatments for GD cannot completely reverse bone problems. The aim of this work was to evaluate the potential of MSCs from GD patients (GD MSCs) to differentiate towards the osteoblast (GD Ob) and adipocyte (GD Ad) lineages, and their role in osteoclastogenesis. We observed that GD Ob exhibited reduced mineralization, collagen deposition and alkaline phosphatase activity (ALP), as well as decreased gene expression of RUNX2, COLA1 and ALP. We also evaluated the process of osteoclastogenesis and observed that conditioned media from GD MSCs supernatants induced an increase in the number of osteoclasts. In this model, osteoclastogenesis was induced by RANKL and IL-1β. Furthermore, results showed that in GD MSCs there was a promotion in NLRP3 and PPAR-γ gene expression. Adipogenic differentiation revealed that GD Ad had an increase in PPAR-γ and a reduced RUNX2 gene expression, promoting adipocyte differentiation. In conclusion, our results show that GD MSCs exhibited deficient GD Ob differentiation and increased adipogenesis. In addition, we show that GD MSCs promoted increased osteoclastogenesis through RANKL and IL-1β. These changes in GD MSCs are likely to contribute to skeletal imbalance observed in GD patients.

Interactions of Osteoprogenitor Cells with a Novel Zirconia Implant Surface

Background: This study compared the in vitro response of a mouse pre-osteoblast cell line on a novel sandblasted zirconia surface with that of titanium. Material and Methods: The MC3T3-E1 subclone 4 osteoblast precursor cell line was cultured on either sandblasted titanium (SBCpTi) or sandblasted zirconia (SBY-TZP). The surface topography was analysed by three-dimensional laser microscopy and scanning electron microscope. The wettability of the discs was also assessed. The cellular response was quantified by assessing the morphology (day 1), proliferation (day 1, 3, 5, 7, 9), viability (day 1, 9), and migration (0, 6, 24 h) assays. Results: The sandblasting surface treatment in both titanium and zirconia increased the surface roughness by rendering a defined surface topography with titanium showing more apparent nano-topography. The wettability of the two surfaces showed no significant difference. The zirconia surface resulted in improved cellular spreading and a significantly increased rate of migration compared to titanium. However, the cellular proliferation and viability noted in our experiments were not significantly different on the zirconia and titanium surfaces. Conclusions: The novel, roughened zirconia surface elicited cellular responses comparable to, or exceeding that, of titanium. Therefore, this novel zirconia surface may be an acceptable substitute for titanium as a dental implant material.

Heat treatment dependent cytotoxicity of silicalite-1 films deposited on Ti-6Al-4V alloy evaluated by bone-derived cells

A silicalite-1 film (SF) deposited on Ti-6Al-4V alloy was investigated in this study as a promising coating for metallic implants. Two forms of SFs were prepared: as-synthesized SFs (SF-RT), and SFs heated up to 500 °C (SF-500) to remove the excess of template species from the SF surface. The SFs were characterized in detail by X-ray photoelectron spectroscopy (XPS), by Fourier transform infrared spectroscopy (FTIR), by scanning electron microscopy (SEM) and water contact angle measurements (WCA). Two types of bone-derived cells (hFOB 1.19 non-tumor fetal osteoblast cell line and U-2 OS osteosarcoma cell line) were used for a biocompatibility assessment. The initial adhesion of hFOB 1.19 cells, evaluated by cell numbers and cell spreading area, was better supported by SF-500 than by SF-RT. While no increase in cell membrane damage, in ROS generation and in TNF-alpha secretion of bone-derived cells grown on both SFs was found, gamma H2AX staining revealed an elevated DNA damage response of U-2 OS cells grown on heat-treated samples (SF-500). This study also discusses differences between osteosarcoma cell lines and non-tumor osteoblastic cells, stressing the importance of choosing the right cell type model.

The synergetic effect of bioactive molecule-loaded electrospun core-shell fibres for reconstruction of critical-sized calvarial bone defect-The effect of synergetic release on bone Formation

OBJECTIVES

Bone regeneration is a complex process modulated by multiple growth factors and hormones during long regeneration period; thus, designing biomaterials with the capacity to deliver multiple bioactive molecules and obtain sustained release has gained an increasing popularity in recent years. This study is aimed to evaluate the effect of a novel core-shell electrospun fibre loaded with dexamethasone (DEX) and bone morphogenetic protein-2 (BMP-2) on bone regeneration.

MATERIALS AND METHODS

The core-shell electrospun fibres were fabricated by coaxial electrospinning technology, which were composed of poly-D, L-lactide (PLA) shell and poly (ethylene glycol) (PEG) core embedded with BMP-2 and DEX-loaded micelles. Morphology, hydrophilicity, gradation, release profile of BMP-2 and DEX, and cytological behaviour on bone marrow mesenchymal stem cells (BMSCs) were characterized. Furthermore, the effect on bone regeneration was evaluated via critical-sized calvarial defect model.

RESULTS

The electrospun fibres were featured by the core-shell fibrous architecture and a suitable degradation rate. The sustained release of DEX and BMP-2 was up to 562 hours. The osteogenic gene expression and calcium deposition of BMSCs were significantly enhanced, indicating the osteoinduction capacity of electrospun fibres. This core-shell fibre could accelerate repair of calvarial defects in vivo via synergistic effect.

CONCLUSIONS

This core-shell electrospun fibre loaded with DEX and BMP-2 can act synergistically to enhance bone regeneration, which stands as a strong potential candidate for repairing bone defects.

Improved Blood Compatibility and Endothelialization of Titanium Oxide Nanotube Arrays on Titanium Surface by Zinc Doping

Titanium dioxide nanotube arrays are widely used in biomaterials due to their unique tubular structure and tunable biocompatibility. In the present study, titanium oxide nanotube arrays with different diameters were prepared on the titanium surface by anodization, followed by zinc doping using hydrothermal treatment to enhance the biocompatibility. Both the nanotube dimensions and zinc doping had obvious influences on the hydrophilicity, protein adsorption, blood compatibility, and endothelial cell behaviors of the titanium surface. The increase of the diameter and zinc doping can improve the hydrophilicity of the titanium surface. The increase of nanotube diameter could reduce the albumin adsorption while increasing the fibrinogen adsorption. However, zinc doping can simultaneously promote the adsorption of albumin and fibrinogen, and the effect was more obvious for albumin. Zinc doping can significantly improve the blood compatibility of the titanium oxide nanotubes because it cannot only increase the activity of cyclophosphate guanylate (cGMP) but also significantly reduce the platelets adhesion and hemolysis rate. Moreover, it was also found that both the smaller diameter and zinc doping nanotubes can enhance the endothelial cell adhesion and proliferation as well as up-regulate the expression of NO and VEGF. Therefore, the zinc doped titanium dioxide nanotube array can be used to simultaneously improve the blood compatibility and promote endothelialization of the titanium-based biomaterials and implants, such as intravascular stents.

Enhanced osteogenic differentiation of osteoblasts on CaTiO3 nanotube film

Improved implant-bone interface interaction for rapid formation of strong and long-lasting bond is significantly important in orthopedic clinics. Herein, Ca-doped TiO₂ nanotube film (M-CaNTs) with enhanced adhesion strength was fabricated on titanium (Ti) surface by an anodization-hydrothermal treatment. Results showed that TiO₂ nanotube film (M-NTs) fabricated by modified anodization was amorphous, exhibiting 100-nm diameter and 12-nm tube wall thickness. After hydrothermal treatment, the nanotubular structure of M-CaNTs kept integrated, but was volume-expanded, exhibiting a decreased diameter (∼ 60 nm) and an increased wall thickness (∼ 30 nm). The formation of M-CaNTs proceeded preferentially at the interior surfaces of the closely aligned nanotubes, involving an in situ dissolution-recrystallization process. Though the adhesion strength of M-CaNTs was weakened by the volume-expansion derived internal stress, it was still higher than that of the traditionally obtained one. In the in vitro investigations, the combination of nanotubular structure and Ca²⁺ could expectedly enhance the attachment, spreading and proliferation of MC3T3-E1 cells, as well as promote the expressions of bone-specific genes, intracellular proteins and ALP activity, which in turn accelerated collagen secretion and ECM mineralization. This work provides an attractive potential for the surface modification of Ti-based implants in clinical application.

A multifunctional dexamethasone-delivery implant fabricated using atmospheric plasma and its effects on apoptosis, osteogenesis and inflammation

Implant-based local drug delivery is a unique surgical therapy with many clinical advantages. Atmospheric pressure plasma is a novel non-thermal surface biotechnology that has only recently been applied in enhancing a surgical implant. We are the first to use this technology to successfully create a dexamethasone-delivery metallic implant. Irrespective of the loaded medication, the surface of this novel implant possesses advantageous material features including homogeneity, hydrophilicity, and optimal roughness. UV-vis spectroscopy revealed much more sustainable drug release compared to the implants produced using simple drug attachment. In addition, our drug-releasing implant was found to have multiple biological benefits. As proven by the ELISA data, this multi-layer drug complex provides differential regulation on the cell apoptosis, as well as pro-osteogenic and anti-inflammatory effects on the peri-implant tissue. Furthermore, using the pathway-specific PCR array, our study discovered 28 and 26 upregulated and downregulated genes during osteogenesis and inflammation on our newly fabricated drug-delivery implant, respectively. The medication-induced change in molecular profile serves as a promising clue for designing future implant-based therapy. Collectively, we present atmospheric pressure plasma as a potent tool for creating a surgical implant-based drug-delivery system, which renders multiple therapeutic potentials. Graphical abstract Schematic of the APP-facilitated Dex-delivery implant. This layer-by-layer drug-releasing complex consisted of bottom plasma activation layer, middle medication layer, and top absorbable polymer layer.

Development of label-free biophysical markers in osteogenic maturation

The spatial and temporal changes of morphological and mechanical properties of living cells reflect complex functionally-associated processes. Monitoring these modifications could provide a direct information on the cellular functional state. Here we present an integrated biophysical approach to the quantification of the morphological and mechanical phenotype of single cells along a maturation pathway. Specifically, quantitative phase microscopy and single cell biomechanical testing were applied to the characterization of the maturation of human foetal osteoblasts, demonstrating the ability to identify effective label-free biomarkers along this fundamental biological process.

Rapid Fabrication, Microstructure, and in Vitro and in Vivo Investigations of a High-Performance Multilayer Coating with External, Flexible, and Silicon-Doped Hydroxyapatite Nanorods on Titanium

A high-performance multilayer coating with external, flexible, and silicon-doped hydroxyapatite (Si-HA) nanorods was designed using bionics. Plasma electrolytic oxidation (PEO) and the microwave hydrothermal (MH) method were used to rapidly deposit this multilayer coating on a titanium (Ti) substrate, applied for 5 and 10 min, respectively. The bioactive multilayer coating was composed of four layers, and the outermost layer was an external growth layer that consisted of many Si-HA nanorods with a single-crystal structure. The Si-HA nanorods exhibited good flexibility, likely because of their complete single-crystal structures, smooth surfaces, and suitable diameters and lengths. This multilayer coating with a high surface energy was superhydrophilic and exhibited good in vitro bioactivities, such as good apatite formation ability, good cell spreading, and high osteogenic gene expression levels. After implantation in the tibia of rabbits for 16 weeks, almost no soft tissues were formed at the MH treated PEO implant-bone interface. A direct bone contact interface was formed by a bridging effect of the flexible Si-HA nanorods, which further produced a high implant-bone interface bonding strength. The current results demonstrated that the bioactive multilayer layers with the flexible Si-HA nanorods displayed a very good osseointegration ability, showing promising applications in the biomedical field.

Both silicalite-1/SiC foam and ZSM-5/SiC foam may serve as novel bone replacement materials

Background

This study aimed to analyze the bioactivity and biocompatibility of silicon carbide (SiC) foam coated with one of two kinds of zeolite.

Methods

The surface charges, protein adsorption ability and mineralization ability were compared between silicalite-1/SiC foam and ZSM-5/SiC foam.

Results

Proliferation and differentiation of primary osteoblasts seeded on two types of materials were significantly higher when compared with uncoated SiC foam after 7 d. There was no significant difference in the bioactivity between silicalite-1/SiC foam and ZSM-5/SiC foam. Silicalite-1/SiC foam and ZSM-5/SiC foam had no cytotoxic effect on primary osteoblasts.

Conclusions

These results suggest both silicalite-1/SiC foam and ZSM-5/SiC foam have the potential for use as novel bone replacement materials.

Human mesenchymal stem cells differentiate into an osteogenic lineage in presence of strontium containing bioactive glass nanoparticles

While bioactive glass and ions released during its dissolution are known to stimulate osteoblast cells, the effect bioactive glass has on human stem cells is not clear. Here, we show that spherical monodispersed strontium containing bioactive nanoparticles (Sr-BGNPs) of composition 90.6 mol% SiO₂, 5.0 mol% CaO, 4.4% mol% SrO (4.4%Sr-BGNPs) and 88.8 mol% SiO₂, 1.8 mol% CaO, and 9.4 mol% SrO (9.4%Sr-BGNPs) stimulate bone marrow derived human stem cell (hMSC) differentiation down an osteogenic pathway without osteogenic supplements. The particles were synthesised using a modified Stӧber process and had diameters of 90 ± 10 nm. Previous work on similar particles that did not contain Sr (80 mol% SiO₂, 20 mol% CaO) showed stem cells did not differentiate when exposed to the particles. Here, both compositions of the Sr-BGNPs (up to concentration of 250 μg/mL) stimulated the early-, mid-, and late-stage markers of osteogenic differentiation and accelerated mineralisation in the absence of osteogenic supplements. Sr ions play a key role in osteogenic stem cell differentiation. Sr-BGNP dissolution products did not adversely affect hMSC viability and no significant differences in viability were measured between each particle composition. Confocal and transmission electron microscopy (TEM) demonstrated that monodispersed Sr-BGNPs were internalised and localised within vesicles in the cytoplasm of hMSCs. Degradation of particles inside the cells was observed, whilst maintaining effective cations (Ca and Sr) in their silica network after 24 h in culture. The uptake of Sr-BGNPs by hMSCs was reduced by inhibitors of specific routes of endocytosis, indicating that the Sr-BGNPs uptake by hMSCs was probably via mixed endocytosis mechanisms. Sr-BGNPs have potential as injectable therapeutic devices for bone regeneration or treatment of conditions such as osteoporosis, because of their ability deliver a sustained release of osteogenic inorganic cations, e.g. calcium (Ca) or and strontium (Sr), through particle degradation locally to cells. STATEMENT OF SIGNIFICANCE: Here, we show that 90 nm spherical strontium containing bioactive nanoparticles of stimulate bone marrow derived human stem cell (hMSC) differentiation down an osteogenic pathway without the use of osteogenic supplements. While bioactive glass and its dissolution products are known to promote excellent bone regeneration in vivo and to stimulate osteoblast cells to produce bone matrix in vitro, their effect on human stem cells is not clear. Previously our nanoparticles that contained only SiO₂ and CaO did not provoke human bone marrow or adipose derived stem cell differentiation.

Osseointegration of Alkali-Modified NANOZR Implants: An In Vivo Study

Ingredients and surface modification methods are being continually developed to improve osseointegration of dental implants and reduce healing times. In this study, we demonstrate in vitro that, by applying concentrated alkali treatment to NANOZR with strong bending strength and fracture toughness, a significant improvement in the bone differentiation of rat bone marrow cells can be achieved. We investigated the influence of materials modified with this treatment in vivo, on implanted surrounding tissues using polychrome sequential fluorescent labeling and micro-computer tomography scanning. NANOZR implant screws in the alkali-treated group and the untreated group were evaluated after implantation in the femur of Sprague–Dawley male rats, indicating that the amount of new bone in the alkali-modified NANOZR was higher than that of unmodified NANOZR. Alkali-modified NANOZR implants proved to be useful for the creation of new implant materials.

The summary of the most important cell-biomaterial interactions that need to be considered during in vitro biocompatibility testing of bone scaffolds for tissue engineering applications

Tissue engineered products (TEPs), which mean biomaterials containing either cells or growth factors or both cells and growth factors, may be used as an alternative to the autografts taken directly from the bone of the patients. Nevertheless, the use of TEPs needs much more understanding of biointeractions between biomaterials and eukaryotic cells. Despite the possibility of the use of in vitro cellular models for initial evaluation of the host response to the implanted biomaterial, it is observed that most researchers use cell cultures only for the evaluation of cytotoxicity and cell proliferation on the biomaterial surface, and then they proceed to animal models and in vivo testing of bone implants without fully utilizing the scientific potential of in vitro models. In this review, the most important biointeractions between eukaryotic cells and biomaterials were discussed, indicating molecular mechanisms of cell adhesion, proliferation, and biomaterial-induced activation of immune cells. The article also describes types of cellular models which are commonly used for biomaterial testing and highlights the possibilities and drawbacks of in vitro tests for biocompatibility evaluation of novel scaffolds. Finally, the review summarizes recent findings concerning the use of adult mesenchymal stem cells for TEP generation and compares the potential of bone marrow- and adipose tissue-derived stem cells in regenerative medicine applications.

Poly-l-lysine-coated PLGA/poly(amino acid)-modified hydroxyapatite porous scaffolds as efficient tissue engineering scaffolds for cell adhesion, proliferation, and differentiation

Ideal bone tissue engineering scaffolds should be biocompatible, biodegradable, and mechanically robust and have the ability to regulate cell function.

Enhanced in-vitro osteoblastic functions on β-type titanium alloy using surface mechanical attrition treatment

To improve the osseointegration of titanium based implants, we herein modified Ti-25Nb-3Mo-2Sn-3Zr, a β-type titanium alloy by means of surface mechanical attrition treatment (SMAT). X-ray diffraction and transmission electron microscope results jointly indicate that SMAT process refined the average grain size of β phase in the surface layer of the alloy from about 110 μm to 26 nm. Besides, the surface properties and in-vitro cell culture tests of the SMAT-processed samples were investigated compared to those on the non-treated samples. Atomic force microscope and hydrophilicity tests revealed that the SMAT-processed surface was much rougher and hydrophilic than the non-treated surface. In vitro experimental results showed that SMAT-processed surface promoted adsorption of total protein as well as anchoring proteins such as vitronectin and fibronectin on its surface from cell culture medium, furthermore, significant improvements of osteoblast adhesion, proliferation, differentiation and extracellular mineralization were also found on the SMAT-processed surface compared to the non-treated surface. This could be attributed to the grain refinement as well as increased surface hydrophilicity and roughness after SMAT process. Our study provides a promising means of surface modification for future use in biomedical application.

Functionalization of titania nanotubes with electrophoretically deposited silver and calcium phosphate nanoparticles: Structure, composition and antibacterial assay

Herein TiO₂ nanotubes (NTs) were fabricated via electrochemical anodization and coated with silver and calcium phosphate (CaP) nanoparticles (NPs) by electrophoretic deposition. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) revealed that Ag and CaP NPs were successfully deposited onto the TiO₂ NTs. Using X-ray diffraction, only anatase and Ti were observed after deposition of Ag and CaP NPs. However, X-ray photoelectron spectroscopy (XPS) analysis revealed that the binding energy (BE) of the Ag and CaP NP core levels corresponded to metallic Ag, hydroxyapatite and amorphous calcium phosphate, based on the knowledge that CaP NPs synthesized by precipitation have the nanocrystalline structure of hydroxyapatite. The application of Ag NPs allows for decreasing the water contact angle and thus increasing the surface free energy. It was concluded that the CaP NP surfaces are superhydrophilic. A significant antimicrobial effect was observed on the TiO₂ NT surface after the application of Ag NPs and/or CaP NPs compared with that of the pure TiO₂ NTs. Thus, fabrication of TiO₂ NTs, Ag NPs and CaP NPs with PEI is promising for diverse biomedical applications, such as in constructing a biocompatible coating on the surface of Ti that includes an antimicrobial effect.

In situ polymerization of poly(γ-benzyl-l-glutamate) on mesoporous hydroxyapatite with high graft amounts for the direct fabrication of biodegradable cell microcarriers and their osteogenic induction

Large-scale cell culture for cell expansion in tissue engineering is currently a major focus of research. One method to achieve better cell amplification is to utilize microcarriers. In this study, different amounts of poly(γ-benzyl-l-glutamate) (PBLG) (from 11 wt% to 50 wt%) were grafted on mesoporous hydroxyapatite (MHA) by the in situ ring opening polymerization of γ-benzyl-l-glutamate N-carboxyanhydride (BLG-NCA), and biodegradable and biocompatible PBLG-g-MHA microcarriers were directly fabricated using the oil-in-water (O/W) solvent-evaporation technique for bone tissue engineering. The amount of grafted PBLG could be controlled by adjusting the feed ratio of MHA and BLG-NCA. The relationships between sphere morphology and graft amount or solution concentration were explored. Furthermore, cytological assays were performed to evaluate the biological properties of the PBLG-g-MHA microcarriers. For a solution concentration of 3% (w/v) and PBLG graft amounts of 33 wt% and 50 wt%, the microspheres could be harvested with optimal spherical shapes. In vitro cell culture revealed that the PBLG-g-MHA microspheres had favorable properties for cell proliferation and significantly enhanced the osteogenic differentiation of MC3T3-E1 cells and bone matrix formation.

Effect of Amelogenin Coating of a Nano-Modified Titanium Surface on Bioactivity

The interactions between implants and host tissues depend on several factors. In particular, a growing body of evidence has demonstrated that the surface texture of an implant influences the response of the surrounding cells. The purpose of this study is to develop new implant materials aiming at the regeneration of periodontal tissues as well as hard tissues by coating nano-modified titanium with amelogenin, which is one of the main proteins contained in Emdogain®. We confirmed by quartz crystal microbalance evaluation that amelogenin is easy to adsorb onto the nano-modified titanium surface as a coating. Scanning electron microscopy, scanning probe microscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy analyses confirmed that amelogenin coated the nano-modified titanium surface following alkali-treatment. In vitro evaluation using rat bone marrow and periodontal ligament cells revealed that the initial adhesion of both cell types and the induction of hard tissue differentiation such as cementum were improved by amelogenin coating. Additionally, the formation of new bone in implanted surrounding tissues was observed in in vivo evaluation using rat femurs. Together, these results suggest that this material may serve as a new implant material with the potential to play a major role in the advancement of clinical dentistry.

Silk fibroin/chitosan thin film promotes osteogenic and adipogenic differentiation of rat bone marrow-derived mesenchymal stem cells

As a biodegradable polymer thin film, silk fibroin/chitosan composite film overcomes the defects of pure silk fibroin and chitosan films, respectively, and shows remarkable biocompatibility, appropriate hydrophilicity and mechanical properties. Silk fibroin/chitosan thin film can be used not only as metal implant coating for bone injury repair, but also as tissue engineering scaffold for skin, cornea, adipose, and other soft tissue injury repair. However, the biocompatibility of silk fibroin/chitosan thin film for mesenchymal stem cells, a kind of important seed cell of tissue engineering and regenerative medicine, is rarely reported. In this study, silk fibroin/chitosan film was prepared by solvent casting method, and the rat bone marrow-derived mesenchymal stem cells were cultured on the silk fibroin/chitosan thin film. Osteogenic and adipogenic differentiation of rat bone marrow-derived mesenchymal stem cells were induced, respectively. The proliferation ability, osteogenic and adipogenic differentiation abilities of rat bone marrow-derived mesenchymal stem cells were systematically compared between silk fibroin/chitosan thin film and polystyrene tissue culture plates. The results showed that silk fibroin/chitosan thin film not only provided a comparable environment for the growth and proliferation of rat bone marrow-derived mesenchymal stem cells but also promoted their osteogenic and adipogenic differentiation. This work provided information of rat bone marrow-derived mesenchymal stem cells behavior on silk fibroin/chitosan thin film and extended the application of silk fibroin/chitosan thin film. Based on the results, we suggested that the silk fibroin/chitosan thin film could be a promising material for tissue engineering of bone, cartilage, adipose, and skin.

Synergistic delivery of bFGF and BMP-2 from poly(l-lactic-co-glycolic acid)/graphene oxide/hydroxyapatite nanofibre scaffolds for bone tissue engineering applications

One of the goals of bone tissue engineering is to create scaffolds with excellent biocompatibility, osteoinductive ability and mechanical properties.