The use of flow perfusion culture and subcutaneous implantation with fibroblast-seeded PLLA-collagen 3D scaffolds for abdominal wall repair

Fibroblast matrix implants-a better alternative for incisional hernia repair?

The standard surgical procedure for abdominal hernia repair with conventional prosthetic mesh still results in a high recurrence rate. In the present study, we propose a fibroblast matrix implant (FMI), which is a three-dimensional (3D) poly-L-lactic acid scaffold coated with collagen (matrix) and seeded with fibroblasts, as an alternative mesh for hernia repair. The matrix was seeded with fibroblasts (cellularized) and treated with a conditioned medium (CM) of human Umbilical Cord Mesenchymal Stem Cells (hUC-MSC). Fibroblast proliferation and function were assessed and compared between treated with CM hUC-MSC and untreated group, 24 h after seeding onto the matrix (n= 3). To study the matricesin vivo,the hernia was surgically created on male Sprague Dawley rats and repaired with four different grafts (n= 3), including a commercial mesh (mesh group), a matrix without cells (cell-free group), a matrix seeded with fibroblasts (FMI group), and a matrix seeded with fibroblasts and cultured in medium treated with 1% CM hUC-MSC (FMI-CM group).In vitroexamination showed that the fibroblasts' proliferation on the matrices (treated group) did not differ significantly compared to the untreated group. CM hUC-MSC was able to promote the collagen synthesis of the fibroblasts, resulting in a higher collagen concentration compared to the untreated group. Furthermore, thein vivostudy showed that the matrices allowed fibroblast growth and supported cell functionality for at least 1 month after implantation. The highest number of fibroblasts was observed in the FMI group at the 14 d endpoint, but at the 28 d endpoint, the FMI-CM group had the highest. Collagen deposition area and neovascularization at the implantation site were observed in all groups without any significant difference between the groups. FMI combined with CM hUC-MSC may serve as a better option for hernia repair, providing additional reinforcement which in turn should reduce hernia recurrence.

Silk fibers assisted long-term 3D culture of human primary urinary stem cells via inhibition of senescence-associated genes: Potential use in the assessment of chronic mitochondrial toxicity

Despite being widely applied in drug development, existing in vitro 2D cell-based models are not suitable to assess chronic mitochondrial toxicity. A novel in vitro assay system mimicking in vivo microenvironment for this purpose is urgently needed. The goal of this study is to establish a 3D cell platform as a reliable, sensitive, cost-efficient, and high-throughput assay to predict drug-induced mitochondrial toxicity. We evaluated a long-term culture of human primary urine-derived stem cells (USC) seeded in 3D silk fiber matrix (3D USC-SFM) and further tested chronic mitochondrial toxicity induced by Zalcitabine (ddC, a nucleoside reverse transcriptase inhibitor) as a test drug, compared to USC grown in spheroids. The numbers of USC remain steady in 3D spheroids for 4 weeks and 3D SFM for 6 weeks. However, the majority (95%) of USC survived in 3D SFM, while cell numbers significantly declined in 3D spheroids at 6 weeks. Highly porous SFM provides large-scale numbers of cells by increasing the yield of USC 125-fold/well, which enables the carrying of sufficient cells for multiple experiments with less labor and lower cost, compared to 3D spheroids. The levels of mtDNA content and mitochondrial superoxide dismutase₂ [SOD2] as an oxidative stress biomarker and cell senescence genes (RB and P16, p21) of USC were all stably retained in 3D USC-SFM, while those were significantly increased in spheroids. mtDNA content and mitochondrial mass in both 3D culture models significantly decreased six weeks after treatment of ddC (0.2, 2, and 10 μM), compared to 0.1% DMSO control. Levels of complexes I, II, and III significantly decreased in 3D SFM-USC treated with ddC, compared to only complex I level which declined in spheroids. A dose- and time-dependent chronic MtT displayed in the 3D USC-SFM model, but not in spheroids. Thus, a long-term 3D culture model of human primary USC provides a cost-effective and sensitive approach potential for the assessment of drug-induced chronic mitochondrial toxicity.

Manufacturing, characterization, and degradation of a poly(lactic acid) warp-knitted spacer fabric scaffold as a candidate for tissue engineering applications

Three-dimensional bioabsorbable textiles represent a novel technology for the manufacturing of tissue engineering scaffolds. In the present study, 3D bioabsorbable poly(lactic acid) (PLA) spacer fabric scaffolds are fabricated by warp-knitting and their potential for tissue engineering is explored in vitro. Changes in physical properties and mechanical performance with different heat setting treatments are assessed. To characterize the microenvironment experienced by cells in the scaffolds, yarn properties are investigated prior to, and during, hydrolytic degradation. The differences in yarn morphology, thermal properties, infrared spectra, and mechanical properties are investigated and monitored during temperature accelerated in vitro degradation tests in phosphate buffered saline (PBS) solution at 58 °C and pH 7.4 for 55 days. Yarn and textile cytocompatibility are tested to assess the effect of materials employed, manufacturing conditions, post processing and sterilization on cell viability, together with the cytocompatibility of the textile degradation products. Results show that the heat setting process can be used to modify scaffold properties, such as thickness, porosity, pore size and stiffness within the range useful for tissue regeneration. Scaffold degradation rate in physiological conditions is estimated by comparing yarn degradation data with PLA degradation data from literature. This will potentially allow the prediction of scaffold mechanical stability in the long term and thus its suitability for the remodelling of different tissues. Mouse calvaria preosteoblast MC3T3-E1 cells attachment and proliferation are observed on the scaffold over 12 days of in vitro culture by 4',6-diamidino-2-phenylindole (DAPI) fluorescent staining and DNA quantification. The present work shows the potential of spacer fabric scaffolds as a versatile and scalable scaffold fabrication technique, having the ability to create a microenvironment with appropriate physical, mechanical, and degradation properties for 3D tissue engineering. The high control and tunability of spacer fabric properties makes it a promising candidate for the regeneration of different tissues in patient-specific applications.

Cell-based therapies for reinforcing the treatment efficacy of meshes in abdominal wall hernias：A systematic review and meta-analysis

To achieve a tension-free repair and reduce the recurrence rate of abdominal wall hernias (AWHs), various kinds of meshes have been applied in surgery. However, these meshes are reported to have problems with adhesion, infection, chronic pain and foreign body sensation. Recently, the introduction of cellular components on meshes seems to provide a new alternative to resolve these problems. This study aimed to evaluate the treatment efficacy of meshes seeded with cells (mesh-cell group) for AWHs, compared to meshes without cells (mesh group). Cochrane Library, Web of Science and PubMed were searched for studies that provided data about meshes, cells and AWHs. Twenty-six studies involving 578 animals were included. We found that the mesh-cell group could better control hernia recurrent than the mesh group (OR = 0.25, 95% CI = 0.15-0.42). Although the mesh-cell group did not reduce the incidence of adhesions (OR = 0.67, 95% CI = 0.26-1.74), it alleviated the extent of adhesions (WMD = -1.48, 95% CI = -1.86 to -1.10). In addition, the capillary density of mesh-cell group was also higher than that of mesh group (WMD = 26.27, 95% CI = 14.45-38.09). For incidence of infection, the two groups had no significant differences (OR = 0.94, 95% CI = 0.39-2.31). On the basis of our current evidence, AWHs were likely to receive a satisfied outcome in animal models when treated by meshes seeded with cells. Future studies with human trial data are needed to validate these findings.

In vitro Models and On-Chip Systems: Biomaterial Interaction Studies With Tissues Generated Using Lung Epithelial and Liver Metabolic Cell Lines

In vitro models are very important in medicine and biology, because they provide an insight into cells' and microorganisms' behavior. Since these cells and microorganisms are isolated from their natural environment, these models may not completely or precisely predict the effects on the entire organism. Improvement in this area is secured by organ-on-a-chip development. The organ-on-a-chip assumes cells cultured in a microfluidic chip. The chip simulates bioactivities, mechanics and physiological behavior of organs or organ systems, generating artificial organs in that way. There are several cell lines used so far for each tested artificial organ. For lungs, mostly used cell lines are 16HBE, A549, Calu-3, NHBE, while mostly used cell lines for liver are HepG2, Hep 3B, TPH1, etc. In this paper, state of the art for lung and liver organ-on-a-chip is presented, together with the established in vitro testing on lung and liver cell lines, with the emphasis on Calu-3 (for lung cell lines) and Hep-G2 (for liver cell lines). Primary focus in this review is to discuss different researches on the topics of lung and liver cell line models, approaches in determining fate and transport, cell partitioning, cell growth and division, as well as cell dynamics, meaning toxicity and effects. The review is finalized with current research gaps and problems, stating potential future developments in the field.

Nanofibers and Microfibers for Osteochondral Tissue Engineering

The use of fibers into scaffolds is a way to mimic natural tissues, in which fibrils are embedded in a matrix. The use of fibers can improve the mechanical properties of the scaffolds and may act as structural support for cell growth. Also, as the morphology of fibrous scaffolds is similar to the natural extracellular matrix, cells cultured on these scaffolds tend to maintain their phenotypic shape. Different materials and techniques can be used to produce micrfibers- and nanofibers for scaffolds manufacturing; cells, in general, adhere and proliferate very well on PCL, chitosan, silk fibroin, and other nanofibers. One of the most important techniques to produce microfibers/nanofibers is electrospinning. Nanofibrous scaffolds are receiving increasing attention in bone tissue engineering, because they are able to offer a favorable microenvironment for cell attachment and growth. Different polymers can be electrospun, i.e., polyester, polyurethane, PLA, PCL, collagen, and silk. Other materials such as bioglass fibers, nanocellulose, and even carbon fiber and fabrics have been used to help increase bioactivity, mechanical properties of the scaffold, and cell proliferation. A compilation of mechanical properties and most common biological tests performed on fibrous scaffolds is included in this chapter.

HIGHLIGHTS

The use of microfibers and nanofibers allows for tailoring the scaffold properties. Electrospinning is one of the most important techniques nowadays to produce fibrous scaffolds. Microfibers and nanofibers use in scaffolds is a promising field to improve the behavior of scaffolds in osteochondral applications.

Nitro-Oleic Acid (NO2-OA) Release Enhances Regional Angiogenesis in a Rat Abdominal Wall Defect Model

Ventral hernia is often addressed surgically by the placement of prosthetic materials, either synthetic or from allogeneic and xenogeneic biologic sources. Despite advances in surgical approaches and device design, a number of postsurgical limitations remain, including hernia recurrence, mesh encapsulation, and reduced vascularity of the implanted volume. The in situ controlled release of angiogenic factors from a scaffold facilitating abdominal wall repair might address some of these issues associated with suboptimal tissue reconstruction. Furthermore, a biocomposite material that combines the favorable mechanical properties achievable with synthetic materials and the bioactivity associated with xenogeneic tissue sources would be desirable. In this report, an abdominal wall repair scaffold has been designed based on a microfibrous, elastomeric poly(ester carbonate)urethane urea matrix integrated with a hydrogel derived from decellularized porcine dermis (extracellular matrix [ECM] gel) and poly(lactic-co-glycolic acid) (PLGA) microspheres loaded with nitro-oleic acid (NO₂-OA). NO₂-OA is an electrophilic fatty acid nitro-alkene derivative that, under hypoxic conditions, induces angiogenesis. This scaffold was utilized to repair a rat abdominal wall partial thickness defect, hypothesizing that the nitro-fatty acid release would facilitate increased angiogenesis at the 8-week endpoint. The quantification of neovascularization was conducted by novel methodologies to assess vessel morphology and spatial distribution. The repaired abdominal wall defects were evaluated by histopathologic methods, including quantification of the foreign body response and cellular ingrowth. The results showed that NO₂-OA release was associated with significantly improved regional angiogenesis. The combined biohybrid scaffold and NO₂-OA-controlled release strategy also reduced scaffold encapsulation, increased wall thickness, and enhanced cellular infiltration. More broadly, the three components of the composite scaffold design (ECM gel, polymeric fibers, and PLGA microparticles) enable the tuning of performance characteristics, including scaffold bioactivity, degradation, mechanics, and drug release profile, all decisive factors to better address current limitations in abdominal wall repair or other soft tissue augmentation procedures.

In vitro biomimetic platforms featuring a perfusion system and 3D spheroid culture promote the construction of tissue-engineered corneal endothelial layers

Corneal endothelial cells (CECs) are very important for the maintenance of corneal transparency. However, in vitro, CECs display limited proliferation and loss of phenotype via endothelial to mesenchymal transformation (EMT) and cellular senescence. In this study, we demonstrate that continuous supplementary nutrition using a perfusion culture bioreactor and three-dimensional (3D) spheroid culture can be used to improve CEC expansion in culture and to construct a tissue-engineered CEC layer. Compared with static culture, perfusion-derived CECs exhibited an increased proliferative ability as well as formed close cell-cell contact junctions and numerous surface microvilli. We also demonstrated that the CEC spheroid culture significantly down-regulated gene expression of the proliferation marker Ki67 and EMT-related markers Vimentin and α-SMA, whereas the gene expression level of the CEC marker ATP1A1 was significantly up-regulated. Furthermore, use of the perfusion system in conjunction with a spheroid culture on decellularized corneal scaffolds and collagen sheets promoted the generation of CEC monolayers as well as neo-synthesized ECM formation. This study also confirmed that a CEC spheroid culture on a curved collagen sheet with controlled physiological intraocular pressure could generate a CEC monolayer. Thus, our results show that the use of a perfusion system and 3D spheroid culture can promote CEC expansion and the construction of tissue-engineered corneal endothelial layers in vitro.

Pre-operative in vitro fibroblast coating of porous polyethylene compound grafts - Cell survival in vivo and effects on biocompatibility

BACKGROUND

Key factors for successful porous polyethylene (PPE) implantation are rapid vascularization and low inflammatory response. Dermal fibroblasts produce a variety of pro-angiogenic and immunmodulatory factors.

OBJECTIVE

The aim of this tissue engineering study was to investigate whether coating PPE implants with dermal fibroblasts in vitro is sustainable in vivo and whether the kinetics of blood vessel ingrowth and immunological responses are hereby affected.

METHODS

PPE implants were cultured with syngeneic GFP-transfected dermal fibroblasts. Cells on the biomaterial were quantified before implantation into dorsal skinfold chamber preparations of C57Bl/6 mice. Uncoated implants served as controls. Angiogenic activity and leukocyte-endothelial cell interactions were repeatedly analyzed. After 10 days, mechanical integration was measured and surviving fluorescently labeled fibroblasts were quantified. Expression of inflammatory cytokines was assessed by quantitative real time-reverse transcription PCR.

RESULTS

PPE implants were successfully coated with dermal fibroblasts in vitro and 69% of the cells were still detectable at the end of observation. Angiogenic parameters increased during the observation period in both groups. IL-2, IL17A and IL-10 tended to be increased in coated implants, but did not affect leukocyte-endothelial cell interactions.

CONCLUSIONS

Dermal fibroblast-coating of porous polyethylene implants is feasible and sustainable in vivo. Alone it does not improve biocompatibility but may be beneficial in combination with specific growth factor supplements.

Design Strategies and Applications of Biomaterials and Devices for Hernia Repair

Hernia repair is one of the most commonly performed surgical procedures worldwide, with a multi-billion dollar global market. Implant design remains a critical challenge for the successful repair and prevention of recurrent hernias, and despite significant progress, there is no ideal mesh for every surgery. This review summarizes the evolution of prostheses design toward successful hernia repair beginning with a description of the anatomy of the disease and the classifications of hernias. Next, the major milestones in implant design are discussed. Commonly encountered complications and strategies to minimize these adverse effects are described, followed by a thorough description of the implant characteristics necessary for successful repair. Finally, available implants are categorized and their advantages and limitations elucidated, including non-absorbable and absorbable (synthetic and biologically derived) prostheses, composite prostheses, and coated prostheses. This review not only summarizes the state of the art in hernia repair, but also suggests future research directions toward improved hernia repair utilizing novel materials and fabrication methods.

Low-fouling electrospun PLLA films modified with zwitterionic poly(sulfobetaine methacrylate)-catechol conjugates

In this work, we modified a hydrophobic electrospun poly (l-lactic) acid (PLLA) film with poly (sulfobetaine methacrylate) (pSBMA)-catechol conjugates of different molecular weights to improve the biocompatibility of the film. These conjugates were synthesized via atom transfer radical polymerization. They consist of an ultra-low fouling pSBMA zwitterionic polymer with a surface-adhesive catechol moiety. X-ray photoelectron spectroscopy, contact angle and scanning electron microscopy experiments were performed to characterize films before and after modification with pSBMA-catechol conjugates. Enzyme-linked immunosorbent and fluorescently-labeled bovine serum albumin were used to study the interactions of proteins with these films. Results showed that low molecular weight zwitterionic pSBMA-catechol conjugates greatly discouraged protein adsorption as shown by use of single protein solutions on PLLA films when the modification was performed in ethanolic Tris-HCl solution. This work offers a convenient and effective method to modify electrospun PLLA films for biomedical applications.

STATEMENT OF SIGNIFICANCE

In this work, we report a convenient and effective method to modify electrospun PLLA films using pSBMA-catechol conjugates via "graft-to" for biomedical applications. After pSBMA modification, the PLLA surface becomes hydrophilic with low contact angle and protein adsorption. Results showed that lower molecular weight zwitterionic pSBMA-catechol conjugate led to lower contact angles and better nonfouling properties on PLLA films when the coating was performed in a solution containing ethanol.

Collagen Type II enhances chondrogenic differentiation in agarose-based modular microtissues

BACKGROUND AIMS

Cell-based therapies have made an impact on the treatment of osteoarthritis; however, the repair and regeneration of thick cartilage defects is an important and growing clinical problem. Next-generation therapies that combine cells with biomaterials may provide improved outcomes. We have developed modular microenvironments that mimic the composition of articular cartilage as a delivery system for consistently differentiated cells.

METHODS

Human bone marrow-derived mesenchymal stem cells (MSC) were embedded in modular microbeads consisting of agarose (AG) supplemented with 0%, 10% and 20% collagen Type II (COL-II) using a water-in-oil emulsion technique. AG and AG/COL-II microbeads were characterized in terms of their structural integrity, size distribution and protein content. The viability of embedded MSC and their ability to differentiate into osteogenic, adipogenic and chondrogenic lineages over 3 weeks in culture were also assessed.

RESULTS

Microbeads made with <20% COL-II were robust, generally spheroidal in shape and 80 ± 10 µm in diameter. MSC viability in microbeads was consistently high over a week in culture, whereas viability in corresponding bulk hydrogels decreased with increasing COL-II content. Osteogenic differentiation of MSC was modestly supported in both AG and AG/COL-II microbeads, whereas adipogenic differentiation was strongly inhibited in COL-II containing microbeads. Chondrogenic differentiation of MSC was clearly promoted in microbeads containing COL-II, compared with pure AG matrices.

CONCLUSIONS

Inclusion of collagen Type II in agarose matrices in microbead format can potentiate chondrogenic differentiation of human MSC. Such compositionally tailored microtissues may find utility for cell delivery in next-generation cartilage repair therapies.

Multiple approaches to predicting oxygen and glucose consumptions by HepG2 cells on porous scaffolds in an axial-flow bioreactor

In this study, the distribution of oxygen and glucose was evaluated along with consumption by hepatocytes using three different approaches. The methods include (i) Computational Fluid Dynamics (CFD) simulation, (ii) residence time distribution (RTD) analysis using a step-input coupled with segregation model or dispersion model, and (iii) experimentally determined consumption by HepG2 cells in an open-loop. Chitosan-gelatin (CG) scaffolds prepared by freeze-drying and polycaprolactone (PCL) scaffolds prepared by salt leaching technique were utilized for RTD analyses. The scaffold characteristics were used in CFD simulations i.e. Brinkman's equation for flow through porous medium, structural mechanics for fluid induced scaffold deformation, and advection-diffusion equation coupled with Michaelis-Menten rate equations for nutrient consumption. With the assumption that each hepatocyte behaves like a micro-batch reactor within the scaffold, segregation model was combined with RTD to determine exit concentration. A flow rate of 1 mL/min was used in the bioreactor seeded with 0.6 × 10(6) HepG2 cells/cm(3) on CG scaffolds and oxygen consumption was measured using two flow-through electrodes located at the inlet and outlet. Glucose in the spent growth medium was also analyzed. RTD results showed distribution of nutrients to depend on the surface characteristics of scaffolds. Comparisons of outlet oxygen concentrations between the simulation results, and experimental results showed good agreement with the dispersion model. Outlet oxygen concentrations from segregation model predictions were lower. Doubling the cell density showed a need for increasing the flow rate in CFD simulations. This integrated approach provide a useful strategy in designing bioreactors and monitoring tissue regeneration.

Construction of mesenchymal stem cell-containing collagen gel with a macrochanneled polycaprolactone scaffold and the flow perfusion culturing for bone tissue engineering

A novel bone tissue-engineering construct was developed by using poly(ɛ-caprolactone) (PCL)-macrochanneled scaffolds combined with stem cell-seeded collagen hydrogels and then applying flow perfusion culture. Rat mesenchymal stem cells (MSCs) were loaded into collagen hydrogels, which were then combined with macrochanneled PCL scaffolds. Collagen hydrogels were demonstrated to provide favorable growth environments for MSCs and to foster proliferation. Cell number determination identified retention of substantially fewer (50–60%) cells when they were seeded directly onto macrochanneled PCL than of cells engineered within collagen hydrogels. Additionally, the cells actively proliferated within the combined scaffold for up to 7 days. MSC-loaded collagen–PCL scaffolds were subsequently cultured under flow perfusion to promote proliferation and osteogenic differentiation. Cells proliferated to levels significantly higher in flow perfusion culture than that under static conditions during 21 days. A quantitative polymerase chain reaction (QPCR) assay revealed significant alterations in the transcription of bone-related genes such as osteopontin (OPN), osteocalcin (OCN), and bone sialoprotein (BSP), such as 8-, 2.5-, and 3-fold induction, respectively, after 10 days of flow perfusion relative to those in static culture. OPN and OCN protein levels, as determined by Western blot, increased under flow perfusion. Cellular mineralization was significantly enhanced by the flow perfusion during 21 and 28 days. Analyses of mechanosensitive gene expression induced by flow perfusion shear stress revealed significant upregulation of c-fos and cyclooxygenase-2 (COX-2) during the initial culture period (3–5 days), suggesting that osteogenic stimulation was possible as a result of mechanical force-driven transduction. These results provide valuable information for the design of a new bone tissue-engineering system by combining stem cell-loaded collagen hydrogels with macrochanneled scaffolds in flow perfusion culture.

Delta-sleep inducing peptide entrapment and release from polymer hydrogels based on modified polyvinyl alcohol

The aim of the study was to entrap delta-sleep inducing peptide (DSIP) in cross-linked poly(vinyl alcohol)-based hydrogels of different structures and to evaluate peptide release kinetics from these hydrogels using an in vitro model. Isotropic and macroporous hydrogels on the basis of poly(vinyl alcohol) acrylic derivative (Acr-PVA) as well as macroporous hydogels containing epoxy groups which were synthesized by copolymerization of this monomer with glycidyl methacrylate. The isotropic hydrogels were fabricated at positive temperatures while the macroporous hydrogels (cryogels) were prepared at the temperatures below zero. The peptide was entrapped into macroporous modified PVA hydrogels by addition of a peptide solution on previously fabricated matrices, while into PVA-GMA hydrogels containing epoxy groups peptide immobilization was carried out by incubation of hydrogel matrices in the peptide solution. In the case of isotropic hydrogels the peptide was added into the polymer mixture at a hydrogel formation reaction. The peptide release kinetics was studied by incubation of hydrogels in PBS (pH 7.4), in physiological solution (0.9% NaCl) and in water. DSIP concentration in supernatants was determined by phase-reverse HPLC. DSIP release from the macroporous PVA hydrogel after 30 min incubation was 74, 70 и 64% in water, PBS and 0.9% NaCl, relatively, and it was completed in 3 hs. From the isotropic hydrogel the release neither peptide nor products of its degradation was not observed even after 48 hs of incubation. For freshly prepared hydrogel the release kinetics was as follows: 27 and 78% in 30 and 33 hs, relatively. In the case of the lyophilized hydrogel samples the peptide release was 63% in 30 min incubation while drying patterns at room temperature for 3 days resulted in significant peptide loss because its structure damage.

Impact of short-term perfusion on cell retention for 3D bioconstruct development

Perfusion culture is a commonly used dynamic culture technique in tissue engineering for promoting higher cell number growth. Under perfusion culture, the cell number could be co-influenced by cell detachment and cell proliferation. However, previous studies have mainly focused on the perfusion effects on cell proliferation but largely ignored the aspect of cell detachment. This work demonstrates that perfusion as small as 2.3 mL/min have induced cell loss compared with static culture even for a culture period of 12 minutes Both perfusion rate and direction have influenced the cell retention in the construct. In general, higher perfusion rates have caused more cell loss, largely due to the induced higher flow shear. The influence of perfusion directions on cell retention has been closely related to cell distribution in the construct. The study shows that cell retention is an important aspect that is worth more research attention and should be considered for cell number analysis in 3D construct development.

Autologous urothelial cells transplantation onto a prefabricated capsular stent for tissue engineered ureteral reconstruction

In this study, we have fabricated an artificial ureter by transplantation of in vitro-expanded urothelial cells onto an in vivo-prefabricated capsular stent using tissue engineering methods. Spiral poly (L-lactic acid) (PLLA) stents were transplanted into the subcutaneous of Wistar rats for a period of 1, 2 or 3 weeks to induce the formation of connective tissue capsules on their surfaces. The capsular PLLA stents were then decellularized and further recellularized with bladder epithelial cells to fabricate artificial ureters. The results showed that the entrapped cells in all capsules remained continuously proliferation and lined up in continuous layers. In addition, the urothelial cells on the capsular stents with an embedding period of 2 or 3 weeks showed higher proliferative viability compared with the cells on the stents with an embedding time of 1 week (P < 0.05). The results of the study indicated that the prefabricated capsular stents could serve as alternative cell carriers for tissue engineered ureters, especially with embedding time from 2 to 3 weeks.

New ureteral scaffold constructed with composite poly(L-lactic acid)-collagen and urothelial cells by new centrifugal seeding system

A tissue-engineered ureteral scaffold was constructed with composited poly L-lactic acid (PLLA)-collagen endoluminal stent and uroepithelial cells (UECs) using a new seeding system. The electrospun PLLA-collagen nanofibrous mesh was seeded efficiently with human ureteral epithelial cells using a modified centrifugal seeding device. The cellular nanofibrous mesh was then wound around a spiral endoluminal stent to form a cellular composited PLLA-collagen ureteral scaffold. The cellular ureteral scaffold was subcutaneously implanted into nude mice. Cell attachment, distribution, and viability in vitro were investigated along with the cell fate in vivo. (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay showed that scaffolds seeded with centrifugal method had higher cellular activity than scaffolds seeded with static method (p < 0.05), and the metabolic activity per cell had no significant differences between the two methods (p > 0.05). Histologic analysis showed that the entrapped UECs remained in the scaffolds after 2 wk of implantation. The results of the study indicated that the composited PLLA-collagen endoluminal stent could serve as alternative cell carrier for tissue engineering ureter. In addition, the new modified centrifugal seeding system allowed rapid homogeneous distribution of cells onto the nanofibrous mesh, which will be useful to ureteral reconstruction.

Porous collagen scaffold reinforced with surfaced activated PLLA nanoparticles

Porous collagen scaffold is integrated with surface activated PLLA nanoparticles fabricated by lyophilizing and crosslinking via EDC treatment. In order to prepare surface-modified PLLA nanoparticles, PLLA was firstly grafted with poly (acrylic acid) (PAA) through surface-initiated polymerization of acrylic acid. Nanoparticles of average diameter 316 nm and zeta potential −39.88 mV were obtained from the such-treated PLLA by dialysis method. Porous collagen scaffold were fabricated by mixing PLLA nanoparticles with collagen solution, freeze drying, and crosslinking with EDC. SEM observation revealed that nanoparticles were homogeneously dispersed in collagen matrix, forming interconnected porous structure with pore size ranging from 150 to 200 μm, irrespective of the amount of nanoparticles. The porosity of the scaffolds kept almost unchanged with the increment of the nanoparticles, whereas the mechanical property was obviously improved, and the degradation was effectively retarded. In vitro L929 mouse fibroblast cells seeding and culture studies revealed that cells infiltrated into the scaffolds and were distributed homogeneously. Compared with the pure collagen sponge, the number of cells in hybrid scaffolds greatly increased with the increment of incorporated nanoparticles. These results manifested that the surface-activated PLLA nanoparticles effectively reinforced the porous collagen scaffold and promoted the cells penetrating into the scaffold, and proliferation.

Biomedical Applications of Biodegradable Polymers

Utilization of polymers as biomaterials has greatly impacted the advancement of modern medicine. Specifically, polymeric biomaterials that are biodegradable provide the significant advantage of being able to be broken down and removed after they have served their function. Applications are wide ranging with degradable polymers being used clinically as surgical sutures and implants. In order to fit functional demand, materials with desired physical, chemical, biological, biomechanical and degradation properties must be selected. Fortunately, a wide range of natural and synthetic degradable polymers has been investigated for biomedical applications with novel materials constantly being developed to meet new challenges. This review summarizes the most recent advances in the field over the past 4 years, specifically highlighting new and interesting discoveries in tissue engineering and drug delivery applications.

Applications of knitted mesh fabrication techniques to scaffolds for tissue engineering and regenerative medicine

Knitting is an ancient and yet, a fresh technique. It has a history of no less than 1,000 years. The development of tissue engineering and regenerative medicine provides a new role for knitting. Several meshes knitted from synthetic or biological materials have been designed and applied, either alone, to strengthen materials for the patching of soft tissues, or in combination with other kinds of biomaterials, such as collagen and fibroin, to repair or replace damaged tissues/organs. In the latter case, studies have demonstrated that knitted mesh scaffolds (KMSs) possess excellent mechanical properties and can promote more effective tissue repair, ligament/tendon/cartilage regeneration, pipe-like-organ reconstruction, etc. In the process of tissue regeneration induced by scaffolds, an important synergic relationship emerges between the three-dimensional microstructure and the mechanical properties of scaffolds. This paper presents a comprehensive overview of the status and future prospects of knitted meshes and its KMSs for tissue engineering and regenerative medicine.

Biomaterial guides for lymphatic endothelial cell alignment and migration

Axillary dissection during breast cancer surgery produces extensive lymphatic vessel damage that often leads to lifelong secondary lymphedema of the arm. We have developed a biodegradable material conduit for lymphatic vessel reconstruction where fibers electrospun along the conduit lumen promote endothelial cell alignment and migration in vitro. The diameter and density of the electrospun fibers were optimized for cell migration and direction on two-dimensional substrates by seeding human lymphatic endothelial cells (LECs) onto aligned fibers of varying diameters and densities, randomly oriented fibers, and film substrates with no fibers. We found that LECs became aligned in the fiber direction, with cells seeded on the randomly oriented fibers becoming oriented in random directions, whereas cells seeded on the highly aligned fibers became highly aligned. Cell migration was dependent upon fiber alignment and density, with optimal migration found on 1300 nm diameter aligned fibers of low density. Blood endothelial cells seeded on the fibers exhibited similar behavior as the LECs. Fiber alignment was preserved upon rolling the two-dimensional substrate into the tubular geometry of a lymphatic vessel. The data suggest that aligned electrospun fibers may promote endothelial migration across the conduit in a manner that is independent of lymphatic growth factors.