The optimization of porous polymeric scaffolds for chondrocyte/atelocollagen based tissue-engineered cartilage

Cartilage Integrity: A Review of Mechanical and Frictional Properties and Repair Approaches in Osteoarthritis

Osteoarthritis (OA) is one of the most common causes of disability around the globe, especially in aging populations. The main symptoms of OA are pain and loss of motion and function of the affected joint. Hyaline cartilage has limited ability for regeneration due to its avascularity, lack of nerve endings, and very slow metabolism. Total joint replacement (TJR) has to date been used as the treatment of end-stage disease. Various joint-sparing alternatives, including conservative and surgical treatment, have been proposed in the literature; however, no treatment to date has been fully successful in restoring hyaline cartilage. The mechanical and frictional properties of the cartilage are of paramount importance in terms of cartilage resistance to continuous loading. OA causes numerous changes in the macro- and microstructure of cartilage, affecting its mechanical properties. Increased friction and reduced load-bearing capability of the cartilage accelerate further degradation of tissue by exerting increased loads on the healthy surrounding tissues. Cartilage repair techniques aim to restore function and reduce pain in the affected joint. Numerous studies have investigated the biological aspects of OA progression and cartilage repair techniques. However, the mechanical properties of cartilage repair techniques are of vital importance and must be addressed too. This review, therefore, addresses the mechanical and frictional properties of articular cartilage and its changes during OA, and it summarizes the mechanical outcomes of cartilage repair techniques.

Strontium/Silicon/Calcium-Releasing Hierarchically Structured 3D-Printed Scaffolds Accelerate Osteochondral Defect Repair

Articular cartilage defects are a global challenge, causing substantial disability. Repairing large defects is problematic, often exceeding cartilage's self-healing capacity and damaging bone structures. To tackle this problem, a scaffold-mediated therapeutic ion delivery system is developed. These scaffolds are constructed from poly(ε-caprolactone) and strontium (Sr)-doped bioactive nanoglasses (SrBGn), creating a unique hierarchical structure featuring macropores from 3D printing, micropores, and nanotopologies due to SrBGn integration. The SrBGn-embedded scaffolds (SrBGn-µCh) release Sr, silicon (Si), and calcium (Ca) ions, which improve chondrocyte activation, adhesion, proliferation, and maturation-related gene expression. This multiple ion delivery significantly affects metabolic activity and maturation of chondrocytes. Importantly, Sr ions may play a role in chondrocyte regulation through the Notch signaling pathway. Notably, the scaffold's structure and topological cues expedite the recruitment, adhesion, spreading, and proliferation of chondrocytes and bone marrow-derived mesenchymal stem cells. Si and Ca ions accelerate osteogenic differentiation and blood vessel formation, while Sr ions enhance the polarization of M2 macrophages. The findings show that SrBGn-µCh scaffolds accelerate osteochondral defect repair by delivering multiple ions and providing structural/topological cues, ultimately supporting host cell functions and defect healing. This scaffold holds great promise for osteochondral repair applications.

Fabrication of 3D-printed scaffolds loaded with gallium acetylacetonate for potential application in osteoclastic bone resorption

We recently reported the potential of a new gallium compound, gallium acetylacetonate (GaAcAc) in combating osteoclastic bone resorption through inhibition of osteoclast differentiation and function. Herein, we focused on 3D-printed polylactic acid scaffolds that were loaded with GaAcAc and investigated the impact of scaffold pretreatment with polydopamine (PDA) or sodium hydroxide (NaOH). We observed a remarkable increase in scaffold hydrophilicity with PDA or NaOH pretreatment while biocompatibility and in vitro degradation were not affected. NaOH-pretreated scaffolds showed the highest amount of GaAcAc loading when compared to other scaffolds (p < 0.05). NaOH-pretreated scaffolds with GaAcAc loading showed effective reduction of osteoclast counts and size. The trend was supported by suppression of key osteoclast differentiation markers such as NFAT2, c-Fos, TRAF6, & TRAP. All GaAcAc-loaded scaffolds, regardless of surface pretreatment, were effective in inhibiting osteoclast function as evidenced by reduction in the number of resorptive pits in bovine cortical bone slices (p < 0.01). The suppression of osteoclast function according to the type of scaffold followed the ranking: GaAcAc loading without surface pretreatment > GaAcAc loading with NaOH pretreatment > GaAcAc loading with PDA pretreatment. Additional studies will be needed to fully elucidate the impact of surface pretreatment on the efficacy and safety of GaAcAc-loaded 3D-printed scaffolds.

Poly-ε-caprolactone (PCL)/poly-l-lactic acid (PLLA) nanofibers loaded by nanoparticles-containing TGF-β1 with linearly arranged transforming structure as a scaffold in cartilage tissue engineering

This study aimed to present a novel three-dimensional nanocomposite scaffold using poly-ε-caprolactone (PCL), containing transforming growth factor-beta 1 (TGF-β1)-loaded chitosan-dextran nanoparticles and poly-l-lactic acid (PLLA), to make use of nanofibers and nanoparticles simultaneously. The electrospinning method fabricated a bead-free semi-aligned nanofiber composed of PLLA, PCL, and chitosan-dextran nanoparticles containing TGF-β1. A biomimetic scaffold was constructed with the desired mechanical properties, high hydrophilicity, and high porosity. Transmission electron microscopy findings showed a linear arrangement of nanoparticles along the core of fibers. Based on the results, burst release was not observed. The maximum release was achieved within 4 days, and sustained release was up to 21 days. The qRT-PCR results indicated an increase in the expression of aggrecan and collagen type Ι genes compared to the tissue culture polystyrene group. The results indicated the importance of topography and the sustained release of TGF-β1 from bifunctional scaffolds in directing the stem cell fate in cartilage tissue engineering.

Cartilage biomechanics: From the basic facts to the challenges of tissue engineering

Articular cartilage (AC) is the thin tissue that covers the long bone ends in the joints and that ensures the transmission of forces between adjacent bones while allowing nearly frictionless movements between them. AC repair is a technologic and scientific challenge that has been addressed with numerous approaches. A major deadlock is the capacity to take in account its complex mechanical properties in repair strategies. In this review, we first describe the major mechanical behaviors of AC for the non-specialists. Then, we show how researchers have progressively identified specific mechanical parameters using mathematical models. There are still gaps in our understanding of some of the observations concerning AC biomechanical properties, particularly the differences in extracellular matrix stiffness measured at the microscale and at the millimetric scale. Nevertheless, for bioengineering applications, AC repair strategies must take into account what are commonly considered the main mechanical features of cartilage: its ability to withstand high stresses through three main behaviors (elasticity, poroelasticity and swelling). Finally, we emphasize that future studies need to investigate AC mechanical properties at different scales, particularly the gradient of mechanical properties around cells and across the cartilage depth, and the differences in mechanical properties at different scales. This multi-scale approach could greatly enhance the success of AC restorative approaches.

Knee meniscus regeneration using autogenous injection of uncultured adipose tissue-derived regenerative cells

Introduction

The low healing potential of mature menisci necessitates traditional surgical removal (meniscectomy) to eliminate acute or chronic degenerative tears. However, removal of meniscal tissue is main factor causing osteoarthritis. Adipose tissue-derived regenerative cells (ADRCs), a heterogeneous cell population that includes multipotent adipose-derived stem cells and other progenitor cells, were easily isolated in large amounts from autologous adipose tissue, and same-day processing without culture or expansion was possible. This study investigated the regenerative potential of autologous ADRCs for use in meniscus defects.

Methods

In 10- to 12-week-old male SD rat partial meniscectomy model, an atelocollagen sponge scaffold without or with ADRCs (5.0 × 10⁵ cells) was injected into each meniscus defect. Reconstructed menisci were subjected to histologic, and dynamic mechanical analyses.

Results

After 12 weeks, areas of regenerated meniscal tissue in the atelocollagen sponge scaffold in rats with ADRCs (64.54 ± 0.52%, P < 0.05, n = 10) were larger than in those without injection (57.96 ± 0.45%). ADRCs were shown capable of differentiating chondrocyte-like cells and meniscal tissue components such as type II collagen. Higher elastic moduli and lower fluid permeability of regenerated meniscal tissue demonstrated a favorable structure-function relationship required for native menisci, most likely in association with micron-scale porosity, with the lowest level for tissue integrity possibly reproducible.

Conclusions

This is the first report of meniscus regeneration induced by injection of ADRCs. The results indicate that ADRCs will be useful in future clinical cell-based therapy strategies, including as a cell source for reconstruction of damaged knee menisci.

Meniscus Regeneration With Multipotent Stromal Cell Therapies

Meniscus is a semilunar wedge-shaped structure with fibrocartilaginous tissue, which plays an essential role in preventing the deterioration and degeneration of articular cartilage. Lesions or degenerations of it can lead to the change of biomechanical properties in the joints, which ultimately accelerate the degeneration of articular cartilage. Even with the manual intervention, lesions in the avascular region are difficult to be healed. Recent development in regenerative medicine of multipotent stromal cells (MSCs) has been investigated for the significant therapeutic potential in the repair of meniscal injuries. In this review, we provide a summary of the sources of MSCs involved in repairing and regenerative techniques, as well as the discussion of the avenues to utilizing these cells in MSC therapies. Finally, current progress on biomaterial implants was reviewed.

Approximate Optimization Study of Light Curing Waterborne Polyurethane Materials for the Construction of 3D Printed Cytocompatible Cartilage Scaffolds

Articular cartilage, which is a white transparent tissue with 1–2 mm thickness, is located in the interface between the two hard bones. The main functions of articular cartilage are stress transmission, absorption, and friction reduction. The cartilage cannot be repaired and regenerated once it has been damaged, and it needs to be replaced by artificial joints. Many approaches, such as artificial joint replacement, hyaluronic acid injection, microfracture surgery and cartilage tissue engineering have been applied in clinical treatment. Basically, some of these approaches are foreign material implantation for joint replacement to reach the goal of pain reduction and mechanism support. This study demonstrated another frontier in the research of cartilage reconstruction by applying regeneration medicine additive manufacturing (3D Printing) and stem cell technology. Light curing materials have been modified and tested to be printable and cytocompatible for stem cells in this research. Design of experiments (DOE) is adapted in this investigation to search for the optimal manufacturing parameter for biocompatible scaffold fabrication and stem cell attachment and growth. Based on the results, an optimal working process of biocompatible and printable scaffolds for cartilage regeneration is reported. We expect this study will facilitate the development of cartilage tissue engineering.

The Application of Cartilage Tissue Engineering with Cell-Laden Hydrogel in Plastic Surgery: A Systematic Review

BACKGROUND

As a contour-supporting material, the cartilage has a significant application value in plastic surgery. Since the development of hydrogel scaffolds with sufficient biomechanical strength and high biocompatibility, cell-laden hydrogels have been widely studied for application in cartilage bioengineering. This systematic review summarizes the latest research on engineered cartilage constructed using cell-laden hydrogel scaffolds in plastic surgery.

METHODS

A systematic review was performed by searching the PubMed and Web of Science databases using selected keywords and Medical Subject Headings search terms.

RESULTS

Forty-two studies were identified based on the search criteria. After full-text screening for inclusion and exclusion criteria, 18 studies were included. Data collected from each study included culturing form, seed cell types and sources, concentration of cells and gels, scaffold materials and bio-printing structures, and biomechanical properties of cartilage constructs. These cell-laden hydrogel scaffolds were reported to show some feasibility of cartilage engineering, including better cell proliferation, enhanced deposition of glycosaminoglycans and collagen type II in the extracellular matrix, and better biomechanical properties close to the natural state.

CONCLUSION

Cell-laden hydrogels have been widely used in cartilage bioengineering research. Through 3-dimensional (3D) printing, the cell-laden hydrogel can form a bionic contour structure. Extracellular matrix expression was observed in vivo and in vitro, and the elastic modulus was reported to be similar to that of natural cartilage. The future direction of cartilage tissue engineering in plastic surgery involves the use of novel hydrogel materials and more advanced 3D printing technology combined with biochemistry and biomechanical stimulation.

Effect of Pore Size on Cell Behavior Using Melt Electrowritten Scaffolds

Tissue engineering technology has made major advances with respect to the repair of injured tissues, for which scaffolds and cells are key factors. However, there are still some issues with respect to the relationship between scaffold and cell growth parameters, especially that between the pore size and cells. In this study, we prepared scaffolds with different pore sizes by melt electrowritten (MEW) and used bone marrow mensenchymal stem cells (BMSCs), chondrocytes (CCs), and tendon stem cells (TCs) to study the effect of the scaffold pore size on cell adhesion, proliferation, and differentiation. It was evident that different cells demonstrated different adhesion and proliferation rates on the scaffold. Furthermore, different cell types showed differential preferences for scaffold pore sizes, as evidenced by variations in cell viability. The pore size also affected the differentiation and gene expression pattern of cells. Among the tested cells, BMSCs exhibited the greatest viability on the 200-μm-pore-size scaffold, CCs on the 200- and 100-μm scaffold, and TCs on the 300-μm scaffold. The scaffolds with 100- and 200-μm pore sizes induced a significantly higher proliferation, chondrogenic gene expression, and cartilage-like matrix deposition after in vitro culture relative to the scaffolds with smaller or large pore sizes (especially 50 and 400 μm). Taken together, these results show that the architecture of 10 layers of MEW scaffolds for different tissues should be different and that the pore size is critical for the development of advanced tissue engineering strategies for tissue repair.

Ear Cartilage Reconstruction Combining Induced Pluripotent Stem Cell-Derived Cartilage and Three-Dimensional Shape-Memory Scaffold

Microtia is a congenital malformation of the auricle. The conventional therapy for microtia is reconstruction of the auricle by using the patient's own costal cartilage. Because it is invasive to harvest costal cartilages, less invasive ways for auricular reconstruction need to be established. Recent reports have indicated a new method for the production of cartilaginous particles from human induced pluripotent stem cells. To adopt this method to create an auricular-shaped regenerative cartilage, a novel scaffold with the property of a three-dimensional shape memory was created. A scaffold with a three-dimensional shape of auricular frames composed of a helix and an antihelix, which was designed to mimic an auricular framework carved from autologous costal cartilage and transplanted in auricular reconstruction, was prepared, filled with cartilaginous particles, and subcutaneously transplanted in nude rats. The auricular-shaped regenerative cartilage maintained the given shape and cartilage features in vivo for 1 year. Our findings suggest a novel approach for auricular reconstruction.

Glial Fibrillary Acidic Protein as Biomarker Indicates Purity and Property of Auricular Chondrocytes

Instead of the silicone implants previously used for repair and reconstruction of the auricle and nose lost due to accidents and disease, a new treatment method using tissue-engineered cartilage has been attracting attention. The quality of cultured cells is important in this method because it affects treatment outcomes. However, a marker of chondrocytes, particularly auricular chondrocytes, has not yet been established. The objective of this study was to establish an optimal marker to evaluate the quality of cultured auricular chondrocytes as a cell source of regenerative cartilage tissue. Gene expression levels were comprehensively compared using the microarray method between human undifferentiated and dedifferentiated auricular chondrocytes to investigate a candidate quality control index with an expression level that is high in differentiated cells, but markedly decreases in dedifferentiated cells. We identified glial fibrillary acidic protein (GFAP) as a marker that decreased with serial passages in auricular chondrocytes. GFAP was not detected in articular chondrocytes, costal chondrocytes, or fibroblasts, which need to be distinguished from auricular chondrocytes in cell cultures. GFAP mRNA expression was observed in cultured auricular chondrocytes, and GFAP protein levels were also measured in the cell lysates and culture supernatants of these cells. However, GFAP levels detected from mRNA and protein in cell lysates were significantly decreased by increases in the incubation period. In contrast, the amount of protein in the cell supernatant was not affected by the incubation period. Furthermore, the protein level of GFAP in the supernatants of cultured cells correlated with the in vitro and in vivo production of the cartilage matrix by these cells. The productivity of the cartilage matrix in cultured auricular chondrocytes may be predicted by measuring GFAP protein levels in the culture supernatants of these cells. Thus, GFAP is regarded as a marker of the purity and properties of cultured auricular chondrocytes.

The Use of Nanomaterials in Tissue Engineering for Cartilage Regeneration; Current Approaches and Future Perspectives

The repair and regeneration of articular cartilage represent important challenges for orthopedic investigators and surgeons worldwide due to its avascular, aneural structure, cellular arrangement, and dense extracellular structure. Although abundant efforts have been paid to provide tissue-engineered grafts, the use of therapeutically cell-based options for repairing cartilage remains unsolved in the clinic. Merging a clinical perspective with recent progress in nanotechnology can be helpful for developing efficient cartilage replacements. Nanomaterials, < 100 nm structural elements, can control different properties of materials by collecting them at nanometric sizes. The integration of nanomaterials holds promise in developing scaffolds that better simulate the extracellular matrix (ECM) environment of cartilage to enhance the interaction of scaffold with the cells and improve the functionality of the engineered-tissue construct. This technology not only can be used for the healing of focal defects but can also be used for extensive osteoarthritic degenerative alterations in the joint. In this review paper, we will emphasize the recent investigations of articular cartilage repair/regeneration via biomaterials. Also, the application of novel technologies and materials is discussed.

The Influence of Mucin-Based Artificial Saliva on Properties of Polycaprolactone and Polylactide

Polycaprolactone (PCL) and polylactide (PLA) are the two most common biodegradable polymers with potential use in oral applications. Both polymers undergo mainly slow hydrolytic degradation in the human body. However, specific conditions of the oral cavity, like elevated temperature, low pH, and presence of saliva affect the rate of hydrolysis. The study examined the properties of solid samples of PCL and PLA subjected to degradation in phosphate buffered saline (PBS) and artificial saliva (AS) at temperatures of 37 or 42 °C, and pH values 2 or 7.4. A number of tests were performed, including measurement of the degree of swelling, weight loss, molecular weight, differential scanning calorimetry, and thermogravimetry of polymers, as well as hardness and tensile strength. Additionally, topography and stiffness of surfaces using atomic force microscopy are presented. It has been noticed that in the artificial saliva, the processes of polymer degradation occur slightly more slowly, and the effects of temperature and pH are less pronounced. We believe that a layer of porcine gastric mucin from artificial saliva that adsorbed on the surface of polymers may have a key role in the observed differences; this layer resembles protective mucin coating tissues in the oral cavity.

Implant-type tissue-engineered cartilage derived from human auricular chondrocyte may maintain cartilaginous property even under osteoinductive condition

INTRODUCTION

There is a growing need for chondrocyte implantation for reconstructing cartilage defect. However, ossification of the implanted cartilage is a challenging problem. Implant-type tissue-engineered cartilage from human auricular chondrocytes is a three-dimensional implant type cartilage using PLLA as a scaffold for chondrocytes. Although there is a study which evaluated the ossification of this cartilage in subcutaneous area, there is no study which clarify the possibility of ossification in osteoinductive surroundings. The purpose of this study was to elucidate the possibility of the ossification of implant-type tissue-engineered cartilage using human auricular chondrocyte in an osteoinductive environment.

METHODS

Human chondrocytes were harvested from ear cartilage. After dispersion by enzyme digestion, they were put into either a poly-L-lactic acid (PLLA) or poly lactic-co-glycolic acid (PLGA) scaffold, with collagen gel. Implant-type tissue-engineered cartilage was interposed between pieces of human iliac bone harvested from the same donor and implanted subcutaneously in nude rats. Scaffold without chondrocytes was used as a control. After 1, 3, and 6 months, ossification and cartilage formation were evaluated by X-ray, hematoxylin-eosin (HE) stain and toluidine blue (TB) stain.

RESULTS

There was no ossification of implant-type cartilage using human chondrocytes, even under osteoinductive conditions. HE staining showed that perichondrium formed around the constructs and chondrocytes were observed 6months after the implantation. TB staining showed metachromasia in every sample, with the area of metachromasia increasing over time, suggesting maturation of the cartilage.

CONCLUSIONS

In conclusion, adjacent iliac bone had no apparent effect on the maturation of cartilage in implant-type tissue-engineered cartilage. Cartilage retention and maturation even in the presence of iliac bone could have been due to a scarcity of mesenchymal stem cells in the bone and surrounding area.

Cartilage mechanical tests: Evolution of current standards for cartilage repair and tissue engineering. A literature review

BACKGROUND

Repair procedures and tissue engineering are solutions available in the clinical practice for the treatment of damaged articular cartilage. Regulatory bodies defined the requirements that any products, intended to regenerate cartilage, should have to be applied. In order to verify these requirements, the Food and Drug Administration (FDA, USA) and the International Standard Organization (ISO) indicated some Standard tests, which allow evaluating, in a reproducible way, the performances of scaffolds/treatments for cartilage tissue regeneration.

METHODS

A review of the literature about cartilage mechanical characterization found 394 studies, from 1970 to date. They were classified by material (simulated/animal/human cartilage) and method (theoretical/applied; static/dynamic; standard/non-standard study), and analyzed by nation and year of publication.

FINDINGS

While Standard methods for cartilage mechanical characterization still refer to studies developed in the eighties, expertise and interest on cartilage mechanics research are evolving continuously and internationally, with studies both in vitro - on human and animal tissues - and in silico, dealing with tissue function and modelling, using static and dynamic loading conditions.

INTERPRETATION

there is a consensus on the importance of mechanical characterization that should be considered to evaluate cartilage treatments. Still, relative Standards need to be updated to describe advanced constructs and procedures for cartilage regeneration in a more exhaustive way. The use of the more complex, fibre-reinforced biphasic model, instead of the standard simple biphasic model, to describe cartilage response to loading, and the standardisation of dynamic tests can represent a first step in this direction.

Functional Biomolecule Delivery Systems and Bioengineering in Cartilage Regeneration

Osteoarthritis (OA) is a common degenerative disease which involves articular cartilage, and leads to total joint disability in the advanced stages. Due to its avascular and aneural nature, damaged cartilage cannot regenerate itself. Stem cell therapy and tissue engineering represent a promising route in OA therapy, in which cooperation of mesenchymal stem cells (MSCs) and three-dimensional (3D) scaffolds contribute to cartilage regeneration. However, this approach still presents some limits such as poor mechanical properties of the engineered cartilage. The natural dynamic environment of the tissue repair process involves a collaboration of several signals expressed in the biological system in response to injury. For this reason, tissue engineering involving exogenous "influencers" such as mechanostimulation and functional biomolecule delivery systems (BDS), represent a promising innovative approach to improve the regeneration process. BDS provide a controlled release of biomolecules able to interact between them and with the injured tissue. Nano-dimensional BDS is the future hope for the design of personalized scaffolds, able to overcome the delivery problems. MSC-derived extracellular vesicles (EVs) represent an attractive alternative to BDS, due to their innate targeting abilities, immunomodulatory potential and biocompatibility. Future advances in cartilage regeneration should focus on multidisciplinary strategies such as modular assembly strategies, EVs, nanotechnology, 3D biomaterials, BDS, mechanobiology aimed at constructing the functional scaffolds for actively targeted biomolecule delivery. The aim of this review is to run through the different approaches adopted for cartilage regeneration, with a special focus on biomaterials, BDS and EVs explored in terms of their delivery potential, healing capabilities and mechanical features.

Differential chondro- and osteo-stimulation in three-dimensional porous scaffolds with different topological surfaces provides a design strategy for biphasic osteochondral engineering

Bone/cartilage interfacial tissue engineering needs to satisfy the differential properties and architectures of the osteochondral region. Therefore, biphasic or multiphasic scaffolds that aim to mimic the gradient hierarchy are widely used. Here, we find that two differently structured (topographically) three-dimensional scaffolds, namely, "dense" and "nanofibrous" surfaces, show differential stimulation in osteo- and chondro-responses of cells. While the nanofibrous scaffolds accelerate the osteogenesis of mesenchymal stem cells, the dense scaffolds are better in preserving the phenotypes of chondrocytes. Two types of porous scaffolds, generated by a salt-leaching method combined with a phase-separation process using the poly(lactic acid) composition, had a similar level of porosity (~90%) and pore size (~150 μm). The major difference in the surface nanostructure led to substantial changes in the surface area and water hydrophilicity (nanofibrous ≫ dense); as a result, the nanofibrous scaffolds increased the cell-to-matrix adhesion of mesenchymal stem cells significantly while decreasing the cell-to-cell contracts. Importantly, the chondrocytes, when cultured on nanofibrous scaffolds, were prone to lose their phenotype, including reduced chondrogenic expressions (SOX-9, collagen type II, and Aggrecan) and glycosaminoglycan content, which was ascribed to the enhanced cell-matrix adhesion with reduced cell-cell contacts. On the contrary, the osteogenesis of mesenchymal stem cells was significantly accelerated by the improved cell-to-matrix adhesion, as evidenced in the enhanced osteogenic expressions (RUNX2, bone sialoprotein, and osteopontin) and cellular mineralization. Based on these findings, we consider that the dense scaffold is preferentially used for the chondral-part, whereas the nanofibrous structure is suitable for osteo-part, to provide an optimal biphasic matrix environment for osteochondral tissue engineering.

Collagen Scaffolds in Cartilage Tissue Engineering and Relevant Approaches for Future Development

BACKGROUND

Cartilage tissue engineering (CTE) aims to obtain a structure mimicking native cartilage tissue through the combination of relevant cells, three-dimensional scaffolds, and extraneous signals. Implantation of 'matured' constructs is thus expected to provide solution for treating large injury of articular cartilage. Type I collagen is widely used as scaffolds for CTE products undergoing clinical trial, owing to its ubiquitous biocompatibility and vast clinical approval. However, the long-term performance of pure type I collagen scaffolds would suffer from its limited chondrogenic capacity and inferior mechanical properties. This paper aims to provide insights necessary for advancing type I collagen scaffolds in the CTE applications.

METHODS

Initially, the interactions of type I/II collagen with CTE-relevant cells [i.e., articular chondrocytes (ACs) and mesenchymal stem cells (MSCs)] are discussed. Next, the physical features and chemical composition of the scaffolds crucial to support chondrogenic activities of AC and MSC are highlighted. Attempts to optimize the collagen scaffolds by blending with natural/synthetic polymers are described. Hybrid strategy in which collagen and structural polymers are combined in non-blending manner is detailed.

RESULTS

Type I collagen is sufficient to support cellular activities of ACs and MSCs; however it shows limited chondrogenic performance than type II collagen. Nonetheless, type I collagen is the clinically feasible option since type II collagen shows arthritogenic potency. Physical features of scaffolds such as internal structure, pore size, stiffness, etc. are shown to be crucial in influencing the differentiation fate and secreting extracellular matrixes from ACs and MSCs. Collagen can be blended with native or synthetic polymer to improve the mechanical and bioactivities of final composites. However, the versatility of blending strategy is limited due to denaturation of type I collagen at harsh processing condition. Hybrid strategy is successful in maximizing bioactivity of collagen scaffolds and mechanical robustness of structural polymer.

CONCLUSION

Considering the previous improvements of physical and compositional properties of collagen scaffolds and recent manufacturing developments of structural polymer, it is concluded that hybrid strategy is a promising approach to advance further collagen-based scaffolds in CTE.

Effect of Chemical Composition Variant and Oxygen Plasma Treatments on the Wettability of PLGA Thin Films, Synthesized by Direct Copolycondensation

The synthesis of high molecular weight poly (lactic-co-glycolic) acid (PLGA) copolymers via direct condensation copolymerization is itself a challenging task. Moreover, some of the characteristic properties of polylactide (PLA)-based biomaterials, such as brittleness, hydrophobicity, and longer degradation time, are not suitable for certain biomedical applications. However, such properties can be altered by the copolymerization of PLA with other biodegradable monomers, such as glycolic acid. A series of high molecular weight PLGAs were synthesized through the direct condensation copolymerization of lactic and glycolic acids, starting from 0 to 50 mol% of glycolic acid, and the wettability of its films was monitored as a function of the feed molar ratio. Copolymerization was performed in the presence of a bi-catalytic system using stannous chloride dihydrate and methanesulfonic acid (MSA). The viscosity average molecular weight of the resulting PLGA was in the range of 80k to 135k g/mol. The PLGA films were prepared using the solvent casting technique, and were treated with oxygen plasma for 2 min. The water contact angle of the PLGA films was determined before and after the oxygen plasma treatments, and it was observed that the wettability increased with an increase in the glycolic acid contents, however, the manifolds increased after 2 min of oxygen plasma treatments.

Human amniotic membrane as differentiating matrix for in vitro chondrogenesis

Aim: The aim of the present study is to use human amniotic membrane (HAM) for in vitro chondrogenesis of placenta-derived mesenchymal stem cells (MSCs) and umbilical cord-derived MSCs. Materials & methods: MSCs from the placenta and umbilical cord were isolated, characterized by immunophenotyping and after analyzing their rate of proliferation, cytotoxicity and viability, chondrogenesis was performed on plastic adherent surface and on HAM. Results: Successfully isolated and characterized placenta-derived MSCs and umbilical cord-derived MSCs revealed positive expression of MSCs markers CD90, CD73, CD105 and CD49d, while they were negative for CD45. Both types of cells in the presence of chondrogenic induction medium on plastic adherent surface and HAM showed aggregates of proteoglycan and strong expression of COL2A1 (collagen 2) and ACAN1 (aggrecan). Conclusion: HAM supported proliferation as well as chondrogenesis of MSCs and provide novelty of HAM utilization as an efficient natural delivery matrix for stem cell transplantation.

Application of induced pluripotent stem cells for cartilage regeneration in CLAWN miniature pig osteochondral replacement model

Introduction

Pluripotent stem cells have an advantage that they can proliferate without reduction of the quality, while they have risk of tumorigenesis. It is desirable that pluripotent stem cells can be utilized safely with minimal effort in cartilage regenerative medicine. To accomplish this, we examined the potential usefulness of induced pluripotent stem cells (iPS cells) after minimal treatment via cell isolation and hydrogel embedding for cartilage regeneration using a large animal model.

Methods

Porcine iPS-like cells were established from the CLAWN miniature pig. In vitro differentiation was examined for porcine iPS-like cells with minimal treatment. For the osteochondral replacement model, osteochondral defect was made in the quarters of the anteromedial sides of the proximal tibias in pigs. Porcine iPS-like cells and human iPS cells with minimal treatment were seeded on scaffold made of thermo-compression-bonded beta-TCP and poly-L-lactic acid and transplanted to the defect, and cartilage regeneration and tumorigenesis were evaluated.

Results

The in vitro analysis indicated that the minimal treatment was sufficient to weaken the pluripotency of the porcine iPS-like cells, while chondrogenic differentiation did not occur in vitro. When porcine iPS-like cells were transplanted into osteochondral replacement model after minimal treatment in vitro, cartilage regeneration was observed without tumor formation. Additionally, fluorescent in situ hybridization (FISH) indicated that the chondrocytes in the regenerative cartilage originated from transplanted porcine iPS-like cells. Transplantation of human iPS cells also showed the regeneration of cartilage in miniature pigs under immunosuppressive treatment.

Conclusion

Minimally-treated iPS cells will be a useful cell source for cartilage regenerative medicine.

Periostin contributes to the maturation and shape retention of tissue-engineered cartilage

Traditional tissue-engineered cartilage applied in clinical practice consists of cell suspensions or gel-form materials for which it is difficult to maintain their shapes. Although biodegradable polymer scaffolds are used for shape retention, deformation after transplantation can occur. Here, we showed that periostin (PN), which is abundantly expressed in fibrous tissues, contributes to the maturation and shape retention of tissue-engineered cartilage through conformational changes in collagen molecules. The tissue-engineered cartilage transplanted in an environment lacking PN exhibited irregular shapes, while transplants originating from chondrocytes lacking PN showed limited regeneration. In the in vitro assay, PN added to the culture medium of chondrocytes failed to show any effects, while the 3D culture embedded within the collagen gel premixed with PN (10 μg/mL) enhanced chondrogenesis. The PN-mediated collagen structure enhanced the mechanical strength of the surrounding fibrous tissues and activated chondrocyte extracellular signaling by interstitial fibrous tissues.

Computer-aided analysis of micro-morphological structure of porous membranes

BACKGROUND

The paper presents an approach and computer-aided method of numerical evaluation of the quality of porous membranes used as scaffolds for cultivation of chondrocytes in regeneration of biological tissues.

MATERIALS

The scanning electron microscope (SEM) images of 300× and 1000× magnification presenting the sections of artificial polyvinylpyrrolidone membranes obtained in two alternative production processes are examined.

THEORY AND METHODS

There is presented a combined morphological and statistical method of the assessment of artificial membranes' porosity, based on computer-aided segmentation and analysis of the size and shape of pores. Theoretical backgrounds of description pores as irregular objects in discrete 3-dimensional space are presented. The parameters characterizing the quality of pores: pores irregularity coefficient and pores density are defined. The quality of the examined specimens of materials is characterized by the size (mean 2-dimensional section areas) of pores. The main concept presented in the paper is the extraction of lacking information concerning the third dimension of pores from the 2-dimensional SEM images of their sections. Two approaches to evaluation of the parameters characterizing pores on the basis of computer-aided analysis of their cross-sections are proposed: (1) based on statistical extension of geometrical data and (2) based on analysis of brightness profiles. The corresponding methods are based on the assumption of isotropy of the examined porous materials. The results of automatic measurements of the areas of pores, lengths of their chords and recording the brightness profiles along fixed lines crossing the analyzed images are illustrated by examples.

CONCLUSIONS

Practical usefulness of the proposed methods to evaluation of the quality of porous membranes consists in their ability to be used in case if alternative methods for some reasons cannot be used.

Biological aspects of tissue-engineered cartilage

Cartilage regenerative medicine has been progressed well, and it reaches the stage of clinical application. Among various techniques, tissue engineering, which incorporates elements of materials science, is investigated earnestly, driven by high clinical needs. The cartilage tissue engineering using a poly lactide scaffold has been exploratorily used in the treatment of cleft lip-nose patients, disclosing good clinical results during 3-year observation. However, to increase the reliability of this treatment, not only accumulation of clinical evidence on safety and usefulness of the tissue-engineered products, but also establishment of scientific background on biological mechanisms, are regarded essential. In this paper, we reviewed recent trends of cartilage tissue engineering in clinical practice, summarized experimental findings on cellular and matrix changes during the cartilage regeneration, and discussed the importance of further studies on biological aspects of tissue-engineered cartilage, especially by the histological and the morphological methods.

Three-dimensional changes of noses after transplantation of implant-type tissue-engineered cartilage for secondary correction of cleft lip-nose patients

INTRODUCTION

We have developed an implant-type tissue-engineered cartilage using a poly-l-lactide scaffold. In a clinical study, it was inserted into subcutaneous areas of nasal dorsum in three patients, to correct cleft lip-nose deformity. The aim of this study was to helping evaluation on the efficacy of the regenerative cartilage.

METHODS

3D data of nasal shapes were compared between before and after surgery in computed tomography (CT) images. Morphological and qualitative changes of transplants in the body were also evaluated on MRI, for one year.

RESULTS

The 3D data from CT images showed effective augmentation (>2 mm) of nasal dorsum in almost whole length, observed on the medial line of faces. It was maintained by 1 year post-surgery in all patients, while affected curves of nasal dorsum was not detected throughout the observation period. In magnetic resonance imaging (MRI), the images of transplanted cartilage had been observed until 1 year post-surgery. Those images were seemingly not straight when viewed from the longitudinal plain, and may have shown gentle adaptation to the surrounding nasal bones and alar cartilage tissues.

CONCLUSION

Those findings suggested the potential efficacy of this cartilage on improvement of cleft lip-nose deformity. A clinical trial is now being performed for industrialization.

Improving chondrocyte harvests with poly(2-hydroxyethyl methacrylate) coated materials in the preparation for cartilage tissue engineering

Remarkable advances have been made in cartilage regenerative medicine to cure congenital anomalies including microtia, tissue defects caused by craniofacial injuries, and geriatric diseases such as osteoarthritis. However, those procedures require a substantial quantity of chondrocytes for tissue engineering. Previous studies have required several passages to obtain sufficient cell numbers for three-dimensional and monolayer cultures. Thus, our objective was to improve the quantity of chondrocytes that can be obtained by examining an anti-fouling polyhydrophilic chemical called poly(2-hydroxyethyl methacrylate) (pHEMA). To determine the effectiveness of the chemical, pHEMA solution was applied via dip-coating to centrifuge tubes, serological pipettes, and pipette tips. The cell quantity obtained during standard cell culturing and passaging procedures was measured alongside non-coated materials as a control. A significant 2.2-fold increase of chondrocyte yield was observed after 2 passages when pHEMA was applied to the tubes compared to when non-coated tubes were utilized. The 3-dimensional chondrocyte pellets prepared from the respective cell populations and transplanted into nude mice were histologically and biochemically analyzed. No evidence of difference in matrix production for in vitro and in vivo cultures was found as well as similar proliferation rates and colony formation abilities. The use of pHEMA provides a powerful alternative method for expanding the quantity of chondrocytes harvested and handled during cell isolation and passaging to enhance cartilage tissue engineering.

Direct Writing Electrospinning of Scaffolds with Multidimensional Fiber Architecture for Hierarchical Tissue Engineering

Nanofibrous structures have long been used as scaffolds for tissue engineering (TE) applications, due to their favorable characteristics, such as high porosity, flexibility, high cell attachment and enhanced proliferation, and overall resemblance to native extracellular matrix (ECM). Such scaffolds can be easily produced at a low cost via electrospinning (ESP), but generally cannot be fabricated with a regular and/or complex geometry, characterized by macropores and uniform thickness. We present here a novel technique for direct writing (DW) with solution ESP to produce complex three-dimensional (3D) multiscale and ultrathin (∼1 μm) fibrous scaffolds with desirable patterns and geometries. This technique was simply achieved via manipulating technological conditions, such as spinning solution, ambient conditions, and processing parameters. Three different regimes in fiber morphologies were observed, including bundle with dispersed fibers, bundle with a core of aligned fibers, and single fibers. The transition between these regimes depended on tip to collector distance (Wd) and applied voltage (V), which could be simplified as the ratio V/Wd. Using this technique, a scaffold mimicking the zonal organization of articular cartilage was further fabricated as a proof of concept, demonstrating the ability to better mimic native tissue organization. The DW scaffolds directed tissue organization and fibril matrix orientation in a zone-dependent way. Comparative expression of chondrogenic markers revealed a substantial upregulation of Sox9 and aggrecan (ACAN) on these structures compared to conventional electrospun meshes. Our novel method provides a simple way to produce customized 3D ultrathin fibrous scaffolds, with great potential for TE applications, in particular those for which anisotropy is of importance.

Stromal Cell-Derived Factor-1 Accelerates Cartilage Defect Repairing by Recruiting Bone Marrow Mesenchymal Stem Cells and Promoting Chondrogenic Differentiation<sup/>

Chemokine stromal cell-derived factor-1 (SDF-1) is a powerful chemoattractant for the localization of CXCR4-positive bone marrow mesenchymal stem cells (BMSCs) into the bone marrow. We studied the effects of SDF-1 on the cartilage defect repair by recruiting BMSCs and promoting its chondrogenic differentiation in vitro and in vivo. Chemotaxis analysis with Transwell plate showed that SDF-1 could recruit BMSCs through SDF-1/CXCR4 axis. Real-time polymerase chain reaction, enzyme-linked immunosorbent assays, and Western blot results suggested that the levels of type II collagen and GAG were increased after incubating BMSCs with SDF-1 compared with the without SDF-1 group. More positive BrdU-labeled BMSCs were detected at the cartilage defect region in the SDF-1 + poly [lactide-co-glycolide] (PLGA) scaffold group (SP) in which those animals showed a smooth and transparent cartilage tissue with a strong staining of toluidine blue and type II collagen compared with the no-SDF-1 groups. ICRS score suggested that the repair effect in the SDF-1 + PLGA-treated animals was improved compared with PLGA scaffold group alone at 4 and 8 weeks after surgery; the repair effect from the SDF + PLGA-treated animals was significantly improved compared with the PLGA alone at 12 weeks after surgery. Our in vitro and in vivo results indicated the following: (1) SDF-1 could recruit the BMSCs into cartilage defect area. (2) SDF-1 induces BMSCs expressing type II collagen and GAG, which may accelerate the BMSCs transforming into chondrocytes under the cartilage microenvironment in vivo. (3) PLGA scaffold attached with SDF-1 remarkably promoted the cartilage defect repairing. The defected cartilage was filled with transparent cartilage 12 weeks after the surgery, which shared a similar structure with the adjacent normal cartilage. Taken together, this research provides a new strategy for cartilage defect repairing.

Roles of macrophage migration inhibitory factor in cartilage tissue engineering

To obtain stable outcomes in regenerative medicine, understanding and controlling immunological responses in transplanted tissues are of great importance. In our previous study, auricular chondrocytes in tissue-engineered cartilage transplanted in mice were shown to express immunological factors, including macrophage migration inhibitory factor (MIF). Since MIF exerts pleiotropic functions, in this study, we examined the roles of MIF in cartilage regenerative medicine. We made tissue-engineered cartilage consisting of auricular chondrocytes of C57BL/6J mouse, atellocollagen gel and a PLLA scaffold, and transplanted the construct subcutaneously in a syngeneic manner. Localization of MIF was prominent in cartilage areas of tissue-engineered cartilage at 2 weeks after transplantation, though it became less apparent by 8 weeks. Co-culture with RAW264 significantly increased the expression of MIF in chondrocytes, suggesting that the transplanted chondrocytes in tissue-engineered cartilage could enhance the expression of MIF by stimulation of surrounding macrophages. When MIF was added in the culture of chondrocytes, the expression of type II collagen was increased, indicating that MIF could promote the maturation of chondrocytes. Meanwhile, toluidine blue staining of constructs containing wild type (Mif+/+) chondrocytes showed increased metachromasia compared to MIF-knockout (Mif-/-) constructs at 2 weeks. However, this tendency was reversed by 8 weeks, suggesting that the initial increase in cartilage maturation in Mif+/+ constructs deteriorated by 8 weeks. Since the Mif+/+ constructs included more iNOS-positive inflammatory macrophages at 2 weeks, MIF might induce an M1 macrophage-polarized environment, which may eventually worsen the maturation of tissue-engineered cartilage in the long term.

Optimal conditions of collagenase treatment for isolation of articular chondrocytes from aged human tissues

Introduction

There are various types of cartilage, including the auricular and articular cartilages. These cartilages have different functions, and their matrix volume and density of chondrocytes may differ. Thus, different protocols may be required to digest different types of cartilage.

Methods

In this study, we examined protocols for the digestion of articular and auricular cartilages and determined the optimal conditions for articular cartilage digestion.

Results

Our histological findings showed that the articular cartilage has a larger matrix area and fewer cells than the auricular cartilage. In 1-mm² areas of articular and auricular cartilages, the average numbers of cells were 44 and 380, respectively, and the average matrix areas were 0.94 and 0.77 mm², respectively. The maximum numbers of viable cells (approximately 1 × 10⁵ cells/0.1 g of tissue) were obtained after digestion in 0.15, 0.3, or 0.6% collagenase for 24 h, in 1.2% collagenase for 6 h, or in 2.4% collagenase for 4 h. In tissues incubated in 0.15 or 0.3% collagenase, the cell numbers were lower than 1 × 10⁵, even at 24 h, possibly reflecting incomplete digestion of cartilage. No significant differences were observed in the results of apoptosis assays for all collagenase exposure times and concentrations. However, cell damage appeared to be greater when collagenase concentrations were high. When cells obtained after digestion with different concentrations of collagenase were seeded at a density of 3000 cells/cm², they yielded the maximum cell numbers after 1 week.

Conclusions

We recommend a 24-h incubation in 0.6% collagenase as the optimal condition for chondrocyte isolation from articular cartilage. Moreover, we found that the optimum cell-seeding density is approximately 3000 cells/cm². Conditions determined in this study would maximize the yield of isolated articular chondrocytes and enable the generation of a large quantity of cultured cells.

•

Optimal conditions for articular cartilage digestion were determined.

•

Articular cartilage had a larger matrix and fewer cells than auricular cartilage.

•

A 24-h incubation in 0.6% collagenase was optimal for chondrocyte isolation.

•

The optimum cell-seeding density was approximately 3000 cells/cm².

Optimal conditions of collagenase treatment for isolation of articular chondrocytes from aged human tissues

Introduction

There are various types of cartilage, including the auricular and articular cartilages. These cartilages have different functions, and their matrix volume and density of chondrocytes may differ. Thus, different protocols may be required to digest different types of cartilage.

Methods

In this study, we examined protocols for the digestion of articular and auricular cartilages and determined the optimal conditions for articular cartilage digestion.

Results

Our histological findings showed that the articular cartilage has a larger matrix area and fewer cells than the auricular cartilage. In 1-mm² areas of articular and auricular cartilages, the average numbers of cells were 44 and 380, respectively, and the average matrix areas were 0.94 and 0.77 mm², respectively. The maximum numbers of viable cells (approximately 1 × 10⁵ cells/0.1 g of tissue) were obtained after digestion in 0.15, 0.3, or 0.6% collagenase for 24 h, in 1.2% collagenase for 6 h, or in 2.4% collagenase for 4 h. In tissues incubated in 0.15 or 0.3% collagenase, the cell numbers were lower than 1 × 10⁵, even at 24 h, possibly reflecting incomplete digestion of cartilage. No significant differences were observed in the results of apoptosis assays for all collagenase exposure times and concentrations. However, cell damage appeared to be greater when collagenase concentrations were high. When cells obtained after digestion with different concentrations of collagenase were seeded at a density of 3000 cells/cm², they yielded the maximum cell numbers after 1 week.

Conclusions

We recommend a 24-h incubation in 0.6% collagenase as the optimal condition for chondrocyte isolation from articular cartilage. Moreover, we found that the optimum cell-seeding density is approximately 3000 cells/cm². Conditions determined in this study would maximize the yield of isolated articular chondrocytes and enable the generation of a large quantity of cultured cells.

An Overview of Scaffold Design and Fabrication Technology for Engineered Knee Meniscus

Current surgical treatments for meniscal tears suffer from subsequent degeneration of knee joints, limited donor organs and inconsistent post-treatment results. Three clinical scaffolds (Menaflex CMI, Actifit® scaffold and NUsurface® Meniscus Implant) are available on the market, but additional data are needed to properly evaluate their safety and effectiveness. Thus, many scaffold-based research activities have been done to develop new materials, structures and fabrication technologies to mimic native meniscus for cell attachment and subsequent tissue development, and restore functionalities of injured meniscus for long-term effects. This study begins with a synopsis of relevant structural features of meniscus and goes on to describe the critical considerations. Promising advances made in the field of meniscal scaffolding technology, in terms of biocompatible materials, fabrication methods, structure design and their impact on mechanical and biological properties are discussed in detail. Among all the scaffolding technologies, additive manufacturing (AM) is very promising because of its ability to precisely control fiber diameter, orientation, and pore network micro-architecture to mimic the native meniscus microenvironment.

The effects of lactate and acid on articular chondrocytes function: Implications for polymeric cartilage scaffold design

Poly (lactic-co-glycolic acid) (PLGA) and poly-l-lactate acid (PLLA) are biodegradable polymers widely utilized as scaffold materials for cartilage tissue engineering. Their acid degradation products have been widely recognized as being detrimental to cell function. However, the biological effects of lactate, rather than lactic acid, on chondrocytes have never been investigated. This is the major focus of this study. The amounts of lactate and the pH value (acid) of the PLGA and PLLA degradation medium were measured. The effects of PLGA and PLLA degradation medium, as well as different lactate concentrations and timing of exposure on chondrocytes proliferation and cartilage-specific matrix synthesis were investigated by various techniques including global gene expression profiling and gene knockdown experiments. It was shown that PLGA and PLLA degradation medium differentially regulated chondrocyte proliferation and matrix synthesis. Acidic pH caused by lactate inhibited chondrocyte proliferation and matrix synthesis. The effect of lactate on chondrocyte matrix synthesis was both time and dose dependent. A lactate concentration of 100mM and exposure duration of 8h significantly enhanced matrix synthesis. Lactate could also inhibit expression of cartilage matrix degradation genes in osteoarthritic chondrocytes, such as the major aggrecanase ADAMTS5, whilst promoting matrix synthesis simultaneously. Pulsed addition of lactate was shown to be more efficient in promoting COL2A1 expression. Global gene expression data and gene knock down experiments demonstrated that lactate promote matrix synthesis through up-regulation of HIF1A. These observed differential biological effects of lactate on chondrocytes would have implications for the future design of polymeric cartilage scaffolds.

STATEMENT OF SIGNIFICANCE

Lactic acid is a widely used substrate for polymers synthesis, PLGA and PLLA in particular. Although physical and biological modifications have been made on these polymers to make them be better cartilage scaffolds, little concern has been given on the biological effect of lactic acid, the main degradation product of these polymers, on chondrocytes. Our finding illustrates the differential biological function of lactate and acid on chondrocytes matrix synthesis. These results can facilitate future design of lactate polymers-based cartilage scaffolds.

Polyester type polyHIPE scaffolds with an interconnected porous structure for cartilage regeneration

Development of artificial materials for the facilitation of cartilage regeneration remains an important challenge in orthopedic practice. Our study investigates the potential for neocartilage formation within a synthetic polyester scaffold based on the polymerization of high internal phase emulsions. The fabrication of polyHIPE polymer (PHP) was specifically tailored to produce a highly porous (85%) structure with the primary pore size in the range of 50–170 μm for cartilage tissue engineering. The resulting PHP scaffold was proven biocompatible with human articular chondrocytes and viable cells were observed within the materials as evaluated using the Live/Dead assay and histological analysis. Chondrocytes with round nuclei were organized into multicellular layers on the PHP surface and were observed to grow approximately 300 μm into the scaffold interior. The accumulation of collagen type 2 was detected using immunohistochemistry and chondrogenic specific genes were expressed with favorable collagen type 2 to 1 ratio. In addition, PHP samples are biodegradable and their baseline mechanical properties are similar to those of native cartilage, which enhance chondrocyte cell growth and proliferation.

Analyzing Biological Performance of 3D-Printed, Cell-Impregnated Hybrid Constructs for Cartilage Tissue Engineering

Three-dimensional (3D) bioprinting of hybrid constructs is a promising biofabrication method for cartilage tissue engineering because a synthetic polymer framework and cell-impregnated hydrogel provide structural and biological features of cartilage, respectively. During bioprinting, impregnated cells may be subjected to high temperatures (caused by the adjacent melted polymer) and process-induced mechanical forces, potentially compromising cell function. This study addresses these biofabrication issues, evaluating the heat distribution of printed polycaprolactone (PCL) strands and the rheological property and structural stability of alginate hydrogels at various temperatures and concentrations. The biocompatibility of parameters from these studies was tested by culturing 3D hybrid constructs bioprinted with primary cells from embryonic chick cartilage. During initial two-dimensional culture expansion of these primary cells, two morphologically and molecularly distinct cell populations ("rounded" and "fibroblastic") were isolated. The biological performance of each population was evaluated in 3D hybrid constructs separately. The cell viability, proliferation, and cartilage differentiation were observed at high levels in hybrid constructs of both cell populations, confirming the validity of these 3D bioprinting parameters for effective cartilage tissue engineering. Statistically significant performance variations were observed, however, between the rounded and fibroblastic cell populations. Molecular and morphological data support the notion that such performance differences may be attributed to the relative differentiation state of rounded versus fibroblastic cells (i.e., differentiated chondrocytes vs. chondroprogenitors, respectively), which is a relevant issue for cell-based tissue engineering strategies. Taken together, our study demonstrates that bioprinting 3D hybrid constructs of PCL and cell-impregnated alginate hydrogel is a promising approach for cartilage tissue engineering.

Biocompatibility and Structural Features of Biodegradable Polymer Scaffolds

We performed a comparative analysis of physicochemical properties and biocompatibility of scaffolds of different composition on the basis of biodegradable polymers fabricated by casting and electrospinning methods. For production of polyhydroxyalkanoate-based scaffolds by electrospinning method, the optimal concentration of the polymer was 8-10%. Fiber diameter and properties of the scaffold produced by electrospinning method depended on polymer composition. Addition of polycaprolactone increased elasticity of the scaffolds. Bio- and hemocompatibility of the scaffolds largely depended on the composition formulation and method of scaffold fabrication. Polylactide introduced into the composition of polyhydroxybutyrate-oxyvalerate scaffolds accelerated degradation and increased adhesive properties of the scaffolds.

Structure and properties of porous films based on aliphatic copolyamide developed for cellular technologies

The effect of concentration and viscosity of the copolyamide (copolymer of ε-caprolactam and hexamethylendiaminadipate) solutions in aqueous/alcoholic solvents on its phase state was studied. The films obtained by the coagulation method were characterized by monodisperse pore distribution with an average pore size of 1.3 μm. The films processed by electrospinning from copolyamide solutions were characterized by a bimodal distribution of macropores with one peak of pore radius at 2.0 μm and second peak of pore radius at 20 μm. The adhesion and proliferation of mesenchymal adhesion stem cells (ASCs) stem cells to copolyamide matrix were studied. With the help of scanning electron microscopy it was shown that both tapes porous films were characterized by good adhesion of mesenchymal ASCs stem cells. It was shown that the porous structure, transport and mechanical properties of these copolyamide films allow their use as two-dimensional matrices for cellular technology.

Physically crosslinked poly(vinyl alcohol)–carrageenan composite hydrogels: pore structure stability and cell adhesive ability

Poly(vinyl alcohol) (PVA)–carrageenan (CAR) composite hydrogels can reduce pore collapse during lyophilization and enhance cell adhesion in comparison to pure PVA hydrogels.

Fabrication of polymeric biomaterials: a strategy for tissue engineering and medical devices

Fabrication of biomaterials scaffolds using various methods and techniques is discussed, utilising biocompatible, biodegradable and stimuli-responsive polymers and their composites. This review covers the lithography and printing techniques, self-organisation and self-assembly methods for 3D structural scaffolds generation, and smart hydrogels, for tissue regeneration and medical devices.