Cell–Cell interactions of human neural progenitor-derived astrocytes within a microstructured 3D-scaffold

Oriented Graphene Oxide Scaffold Promotes Nerve Regeneration in vitro and in vivo

Background

Treating peripheral nerve injuries (PNI) with defects remains challenging in clinical practice. The commercial conduits have shown suboptimal nerve regeneration and functional recovery due to their basic tubular design without electroactive and oriented topographical cues.

Purpose

To develop a new scaffold with oriented microstructure and electroactive Graphene oxide (GO) and investigate its' therapeutic effect on nerve regeneration in vitro and in vivo.

Methods

This study employed a straightforward approach to co-spin PCL and GO, yielding an oriented hybrid nanofibrous scaffold known as the O-GO/PCL scaffold. The physical and chemical properties of nanofibrous scaffold were tested by scanning electron microscopy (SEM), transmission electron microscope (TEM), tensile test and so on. Primary Schwann cells (SCs) and dorsal root ganglia (DRG) were used to investigate the impact of the newly developed scaffolds on the biological behavior of neural cells in vitro. Transcriptome sequencing (mRNA-seq) was employed to probe the underlying mechanisms of the synergistic effect of electroactive GO and longitudinal topographic guidance on nerve regeneration. Furthermore, the developed O-GO/PCL scaffold was utilized to bridge a 10-mm sciatic nerve defect in rat, aiming to investigate its therapeutic potential for peripheral nerve regeneration in vivo.

Results and discussion

The SEM and TEM revealed that the newly developed O-GO/PCL scaffold showed longitudinally oriented microstructure and GO particles were homogenously and uniformly distributed inside the nanofibers. Primary SCs were utilized to assess the biocompatibility of the GO-based scaffold, revealing that negligible cytotoxicity when GO concentration does not exceed 0.5%. In vitro analysis of nerve regeneration demonstrated that axons in the O-GO/PCL group exhibited an average length of 1054.88 ± 161.32 µm, significant longer than those in the other groups (P < 0.05). Moreover, mRNA sequencing results suggested that the O-GO/PCL scaffold could enhance nerve regeneration by upregulating genes associated with neural regeneration, encompassing ion transport, axon guidance and cell-cell interactions. Most importantly, we employed the O-GO/PCL scaffold to repair a 10-mm sciatic nerve defect in rat, resulting in augmented nerve regeneration, myelination, and functional recovery.

Conclusion

The O-GO/PCL scaffold with oriented microstructure and electroactive GO represents a promising heral nerve reconstruction.

Advances in current in vitro models on neurodegenerative diseases

Many neurodegenerative diseases are identified but their causes and cure are far from being well-known. The problem resides in the complexity of the neural tissue and its location which hinders its easy evaluation. Although necessary in the drug discovery process, in vivo animal models need to be reduced and show relevant differences with the human tissues that guide scientists to inquire about other possible options which lead to in vitro models being explored. From organoids to organ-on-a-chips, 3D models are considered the cutting-edge technology in cell culture. Cell choice is a big parameter to take into consideration when planning an in vitro model and cells capable of mimicking both healthy and diseased tissue, such as induced pluripotent stem cells (iPSC), are recognized as good candidates. Hence, we present a critical review of the latest models used to study neurodegenerative disease, how these models have evolved introducing microfluidics platforms, 3D cell cultures, and the use of induced pluripotent cells to better mimic the neural tissue environment in pathological conditions.

Effect of 3D Synthetic Microscaffold Nichoid on the Morphology of Cultured Hippocampal Neurons and Astrocytes

The human brain is the most complex organ in biology. This complexity is due to the number and the intricate connections of brain cells and has so far limited the development of in vitro models for basic and applied brain research. We decided to create a new, reliable, and cost-effective in vitro system based on the Nichoid, a 3D microscaffold microfabricated by two-photon laser polymerization technology. We investigated whether these 3D microscaffold devices can create an environment allowing the manipulation, monitoring, and functional assessment of a mixed population of brain cells in vitro. With this aim, we set up a new model of hippocampal neurons and astrocytes co-cultured in the Nichoid microscaffold to generate brain micro-tissues of 30 μm thickness. After 21 days in culture, we morphologically characterized the 3D spatial organization of the hippocampal astrocytes and neurons within the microscaffold, and we compared our observations to those made using the classical 2D co-culture system. We found that the co-cultured cells colonized the entire volume of the 3D devices. Using confocal microscopy, we observed that within this period the different cell types had become well-differentiated. This was further elaborated with the use of drebrin, PSD-95, and synaptophysin antibodies that labeled the majority of neurons, both in the 2D as well as in the 3D co-cultures. Using scanning electron microscopy, we found that neurons in the 3D co-culture displayed a significantly larger amount of dendritic protrusions compared to neurons in the 2D co-culture. This latter observation indicates that neurons growing in a 3D environment may be more prone to form connections than those co-cultured in a 2D condition. Our results show that the Nichoid can be used as a 3D device to investigate the structure and morphology of neurons and astrocytes in vitro. In the future, this model can be used as a tool to study brain cell interactions in the discovery of important mechanisms governing neuronal plasticity and to determine the factors that form the basis of different human brain diseases. This system may potentially be further used for drug screening in the context of various brain diseases.

Characterization of a Novel Aspect of Tissue Scarring Following Experimental Spinal Cord Injury and the Implantation of Bioengineered Type-I Collagen Scaffolds in the Adult Rat: Involvement of Perineurial-like Cells?

Numerous intervention strategies have been developed to promote functional tissue repair following experimental spinal cord injury (SCI), including the bridging of lesion-induced cystic cavities with bioengineered scaffolds. Integration between such implanted scaffolds and the lesioned host spinal cord is critical for supporting regenerative growth, but only moderate-to-low degrees of success have been reported. Light and electron microscopy were employed to better characterise the fibroadhesive scarring process taking place after implantation of a longitudinally microstructured type-I collagen scaffold into unilateral mid-cervical resection injuries of the adult rat spinal cord. At long survival times (10 weeks post-surgery), sheets of tightly packed cells (of uniform morphology) could be seen lining the inner surface of the repaired dura mater of lesion-only control animals, as well as forming a barrier along the implant–host interface of the scaffold-implanted animals. The highly uniform ultrastructural features of these scarring cells and their anatomical continuity with the local, reactive spinal nerve roots strongly suggest their identity to be perineurial-like cells. This novel aspect of the cellular composition of reactive spinal cord tissue highlights the increasingly complex nature of fibroadhesive scarring involved in traumatic injury, and particularly in response to the implantation of bioengineered collagen scaffolds.

Modulation of Cell Behavior by 3D Biocompatible Hydrogel Microscaffolds with Precise Configuration

Three-dimensional (3D) micronano structures have attracted much attention in tissue engineering since they can better simulate the microenvironment in vivo. Two-photon polymerization (TPP) technique provides a powerful tool for printing arbitrary 3D structures with high precision. Here, the desired 3D biocompatible hydrogel microscaffolds (3D microscaffold) with structure design referring to fibroblasts L929 have been fabricated by TPP technology, particularly considering the relative size of cell seed (cell suspension), spread cell, strut and strut spacing of scaffold. Modulation of the cell behavior has been studied by adjusting the porosity from 69.7% to 89.3%. The cell culture experiment results reveal that the obvious modulation of F-actin can be achieved by using the 3D microscaffold. Moreover, cells on 3D microscaffolds exhibit more lamellipodia than those on 2D substrates, and thus resulting in a more complicated 3D shape of single cell and increased cell surface. 3D distribution can be also achieved by employing the designed 3D microscaffold, which would effectively improve the efficiency of information exchange and material transfer. The proposed protocol enables us to better understand the cell behavior in vivo, which would provide high prospects for the further application in tissue engineering.

A 3D‑scaffold of PLLA induces the morphological differentiation and migration of primary astrocytes and promotes the production of extracellular vesicles

The present study analyzed the ability of primary rat astrocytes to colonize a porous scaffold, mimicking the reticular structure of the brain parenchyma extracellular matrix, as well as their ability to grow, survive and differentiate on the scaffold. Scaffolds were prepared using poly‑L‑lactic acid (PLLA) via thermally‑induced phase separation. Firstly, the present study studied the effects of scaffold morphology on the growth of astrocytes, evaluating their capability to colonize. Specifically, two different morphologies were tested, which were obtained by changing the polymer concentration in the starting solution. The structures were characterized by scanning electron microscopy, and a pore size of 20 µm (defined as the average distance between the pore walls) was detected. For comparison, astrocytes were also cultured in the traditional 2D culture system that we have been using since 2003. Then the effects of different substrates, such as collagen I and IV, and fibronectin were analyzed. The results revealed that the PLLA scaffolds, coated with collagen IV, served as very good matrices for astrocytes, which were observed to adhere, grow and colonize the matrix, acquiring their typical morphology. In addition, under these conditions, they secreted extracellular vesicles (EVs) that were compatible in size with exosomes. Their ability to produce exosomes was also suggested by transmission electron microscopy pictures which revealed both EVs and intracellular structures that could be interpreted as multivesicular bodies. The fact that these cells were able to adapt to the PLLA scaffold, together with our previous results, which demonstrated that brain capillary endothelial cells can grow and differentiate on the same scaffold, could support the future use of 3D brain cell co‑culture systems.

Fibroadhesive scarring of grafted collagen scaffolds interferes with implant-host neural tissue integration and bridging in experimental spinal cord injury

Severe traumatic spinal cord injury (SCI) results in a devastating and permanent loss of function, and is currently an incurable condition. It is generally accepted that future intervention strategies will require combinational approaches, including bioengineered scaffolds, to support axon growth across tissue scarring and cystic cavitation. Previously, we demonstrated that implantation of a microporous type-I collagen scaffold into an experimental model of SCI was capable of supporting functional recovery in the absence of extensive implant–host neural tissue integration. Here, we demonstrate the reactive host cellular responses that may be detrimental to neural tissue integration after implantation of collagen scaffolds into unilateral resection injuries of the adult rat spinal cord. Immunohistochemistry demonstrated scattered fibroblast-like cell infiltration throughout the scaffolds as well as the presence of variable layers of densely packed cells, the fine processes of which extended along the graft–host interface. Few reactive astroglial or regenerating axonal profiles could be seen traversing this layer. Such encapsulation-type behaviour around bioengineered scaffolds impedes the integration of host neural tissues and reduces the intended bridging role of the implant. Characterization of the cellular and molecular mechanisms underpinning this behaviour will be pivotal in the future design of collagen-based bridging scaffolds intended for regenerative medicine.

Cell-enrichment with olfactory ensheathing cells has limited local extra beneficial effects on nerve regeneration supported by the nerve guide Perimaix

The reconstruction of peripheral nerve injuries is clinically challenging, and today, the autologous nerve transplantation is still considered as the only gold standard remedy for nerve lesions where a direct nerve coaptation is not possible. Nevertheless, the functional merits of many biomaterials have been tested as potential substitutes for the autologous nerve transplant. One of the strategies that have been pursued is the combination of bioengineered nerve guides with cellular enrichment. In this present study, we combined the previously evaluated collagen-based and microstructured nerve guide Perimaix with olfactory ensheathing cell enrichment. Rat sciatic nerve defects of 20 mm were either bridged by a cell-seeded or nonseeded nerve guide or an autologous nerve transplant. Animals were monitored for 12 weeks for structural and functional parameters. Seeded cells survived on Perimaix, and following implantation aligned along the microstructured Perimaix framework. Axonal densities within the cell-seeded nerve guides were higher than in the nonseeded nerve guides and were comparable to the autograft. Additionally, cell-seeding had local beneficial effects on myelination within the nerve guide, as myelin sheath thickness was enhanced when compared with the empty scaffold. Nevertheless, for bridging the nerve gap of 20 mm, both the cell-seeded as well as nonseeded scaffolds were equally efficient regarding the functional outcome, which did not differ between the autograft, seeded or nonseeded groups. Our data demonstrate that olfactory ensheathing cell enrichment has local effects on nerve regeneration in combination with the Perimaix nerve guide. Surprisingly, for traversing the lesion gap, additional cell-seeding is not crucial.

Looking into the Future: Toward Advanced 3D Biomaterials for Stem-Cell-Based Regenerative Medicine

Stem-cell-based therapies have the potential to provide novel solutions for the treatment of a variety of diseases, but the main obstacles to such therapies lie in the uncontrolled differentiation and functional engraftment of implanted tissues. The physicochemical microenvironment controls the self-renewal and differentiation of stem cells, and the key step in mimicking the stem cell microenvironment is to construct a more physiologically relevant 3D culture system. Material-based 3D assemblies of stem cells facilitate the cellular interactions that promote morphogenesis and tissue organization in a similar manner to that which occurs during embryogenesis. Both natural and artificial materials can be used to create 3D scaffolds, and synthetic organic and inorganic porous materials are the two main kinds of artificial materials. Nanotechnology provides new opportunities to design novel advanced materials with special physicochemical properties for 3D stem cell culture and transplantation. Herein, the advances and advantages of 3D scaffold materials, especially with respect to stem-cell-based therapies, are first outlined. Second, the stem cell biology in 3D scaffold materials is reviewed. Third, the progress and basic principles of developing 3D scaffold materials for clinical applications in tissue engineering and regenerative medicine are reviewed.

Materials for Neural Differentiation, Trans-Differentiation, and Modeling of Neurological Disease

Neuron regeneration from pluripotent stem cells (PSCs) differentiation or somatic cells trans-differentiation is a promising approach for cell replacement in neurodegenerative diseases and provides a powerful tool for investigating neural development, modeling neurological diseases, and uncovering the mechanisms that underlie diseases. Advancing the materials that are applied in neural differentiation and trans-differentiation promotes the safety, efficiency, and efficacy of neuron regeneration. In the neural differentiation process, matrix materials, either natural or synthetic, not only provide a structural and biochemical support for the monolayer or three-dimensional (3D) cultured cells but also assist in cell adhesion and cell-to-cell communication. They play important roles in directing the differentiation of PSCs into neural cells and modeling neurological diseases. For the trans-differentiation of neural cells, several materials have been used to make the conversion feasible for future therapy. Here, the most current applications of materials for neural differentiation for PSCs, neuronal trans-differentiation, and neurological disease modeling is summarized and discussed.

Clinical and biometrical 12-month follow-up in patients after reconstruction of the sural nerve biopsy defect by the collagen-based nerve guide Neuromaix

Many new strategies for the reconstruction of peripheral nerve injuries have been explored for their effectiveness in supporting nerve regeneration. However only a few of these materials were actually clinically evaluated and approved for human use. This open, mono-center, non-randomized clinical study summarizes the 12-month follow-up of patients receiving reconstruction of the sural nerve biopsy defect by the collagen-based nerve guide Neuromaix. Neuromaix was implanted as a micro-structured, two-component scaffold bridging 20–40 mm nerve defects after sural nerve biopsy in twenty patients (eighteen evaluated, two lost in follow-up). Safety of the material was evaluated by clinical examination of wound healing. Performance was assessed by sensory testing of modalities, pain assessment, and palpation for the Hoffmann–Tinel’s sign as well as demarcating the asensitive area at each follow-up visit. Every patient demonstrated uneventful wound healing during the complete 12-month time course of the study. Two patients reported complete return of sensation, whereas eleven out of eighteen patients reported a positive Hoffmann–Tinel’s sign at the lower leg with simultaneous reduction of the asensitive area by 12 months. Our data show that Neuromaix can be implanted safely in humans to bridge sural nerve gaps. No procedure-related, adverse events, or severe adverse events were reported. These first clinical data on Neuromaix provide promising perspectives for the bridging of larger nerve gaps in combined nerves, which should be investigated more through extensive, multi-center clinical trials in the near future.

Scaffolds for 3D in vitro culture of neural lineage cells

Understanding how neurodegenerative disorders develop is not only a key challenge for researchers but also for the wider society, given the rapidly aging populations in developed countries. Advances in this field require new tools with which to recreate neural tissue in vitro and produce realistic disease models. This in turn requires robust and reliable systems for performing 3D in vitro culture of neural lineage cells. This review provides a state of the art update on three-dimensional culture systems for in vitro development of neural tissue, employing a wide range of scaffold types including hydrogels, solid porous polymers, fibrous materials and decellularised tissues as well as microfluidic devices and lab-on-a-chip systems. To provide some context with in vivo development of the central nervous system (CNS), we also provide a brief overview of the neural stem cell niche, neural development and neural differentiation in vitro. We conclude with a discussion of future directions for this exciting and important field of biomaterials research.

STATEMENT OF SIGNIFICANCE

Neurodegenerative diseases, including dementia, Parkinson's and Alzheimer's diseases and motor neuron diseases, are a major societal challenge for aging populations. Understanding these conditions and developing therapies against them will require the development of new physical models of healthy and diseased neural tissue. Cellular models resembling neural tissue can be cultured in the laboratory with the help of 3D scaffolds - materials that allow the organization of neural cells into tissue-like structures. This review presents recent work on the development of different types of scaffolds for the 3D culture of neural lineage cells and the generation of functioning neural-like tissue. These in vitro culture systems are enabling the development of new approaches for modelling and tackling diseases of the brain and CNS.

Two differentially structured collagen scaffolds for potential urinary bladder augmentation: proof of concept study in a Göttingen minipig model

Background

The repair of urinary bladder tissue is a necessity for tissue loss due to cancer, trauma, or congenital abnormalities. Use of intestinal tissue is still the gold standard in the urological clinic, which leads to new problems and dysfunctions like mucus production, stone formation, and finally malignancies. Therefore, the use of artificial, biologically derived materials is a promising step towards the augmentation of this specialised tissue. The aim of this study was to investigate potential bladder wall repair by two collagen scaffold prototypes, OptiMaix 2D and 3D, naïve and seeded with autologous vesical cells, as potential bladder wall substitute material in a large animal model.

Methods

Six Göttingen minipigs underwent cystoplastic surgery for tissue biopsy and cell isolation followed by implantation of unseeded scaffolds. Six weeks after the first operation, scaffolds seeded with the tissue cultured autologous urothelial and detrusor smooth muscle cells were implanted into the bladder together with additional unseeded scaffolds for comparison. Cystography and bladder ultrasound were performed to demonstrate structural integrity and as leakage test of the implantation sites. Eighteen, 22, and 32 weeks after the first operation, two minipigs respectively were sacrificed and the urinary tract was examined via different (immunohistochemical) staining procedures and the usage of two-photon laser scanning microscopy.

Results

Both collagen scaffold prototypes in vivo had good ingrowth capacity into the bladder wall including a quick lining with urothelial cells. The ingrowth of detrusor muscle tissue, along with the degradation of the scaffolds, could also be observed throughout the study period.

Conclusions

We could show that the investigated collagen scaffolds OptiMaix 2D and 3D are a potential material for bladder wall substitution. The material has good biocompatible properties, shows a good cell growth of autologous cells in vitro, and a good integration into the present bladder tissue in vivo.

Functional recovery not correlated with axon regeneration through olfactory ensheathing cell-seeded scaffolds in a model of acute spinal cord injury

The implantation of bioengineered scaffolds into lesion-induced gaps of the spinal cord is a promising strategy for promoting functional tissue repair because it can be combined with other intervention strategies. Our previous investigations showed that functional improvement following the implantation of a longitudinally microstructured collagen scaffold into unilateral mid-cervical spinal cord resection injuries of adult Lewis rats was associated with only poor axon regeneration within the scaffold. In an attempt to improve graft-host integration as well as functional recovery, scaffolds were seeded with highly enriched populations of syngeneic, olfactory bulb-derived ensheathing cells (OECs) prior to implantation into the same lesion model. Regenerating neurofilament-positive axons closely followed the trajectory of the donor OECs, as well as that of the migrating host cells within the scaffold. However, there was only a trend for increased numbers of regenerating axons above that supported by non-seeded scaffolds or in the untreated lesions. Nonetheless, significant functional recovery in skilled forelimb motor function was observed following the implantation of both seeded and non-seeded scaffolds which could not be correlated to the extent of axon regeneration within the scaffold. Mechanisms other than simple bridging of axon regeneration across the lesion must be responsible for the improved motor function.

Multichannel silk protein/laminin grafts for spinal cord injury repair

The physical, chemical, and bioactive cues provided by biomaterials are critical for spinal cord regeneration following injury. In this study, we investigated the bioactivity of a silk-based scaffold for nerve tissue remodeling that featured morphological guidance in the form of ridges as well as bioactive molecules. Multichannel/laminin (LN) silk scaffolds stimulated growth, development, and the extension of primary hippocampal neurons after 7 days of culture in vitro. And then, the multichannel/LN silk scaffolds were implanted into 2-mm-long hemisection defects in Sprague-Dawley rat spinal cords for 70 days to evaluate their bioactivities of spinal cord remolding. Our results demonstrated that animal behavior was significantly improved in the multichannel/LN group, as evaluated by Basso-Beattie-Bresnahan score, whereas the implantation of multichannels and random pores groups resulted in recurring limps. Moreover, histology and immunohistochemical staining revealed an increase in blood vessels and expression of growth associated protein-43 and neurofilament-200 as well as reduced expression of glial fibrillary acidic protein in the multichannel/LN group, which contributed to the rebuilding of spinal cord defects. Thus, multichannel/LN silk scaffolds mediated cell migration, stimulated blood capillary formation, and promoted axonal extension, suggesting the utility of these scaffolds for spinal cord reconstruction. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 3045-3057, 2016.

Tuning the Mechanical Properties of Poly(Ethylene Glycol) Microgel-Based Scaffolds to Increase 3D Schwann Cell Proliferation

2D in vitro studies have demonstrated that Schwann cells prefer scaffolds with mechanical modulus approximately 10× higher than the modulus preferred by nerves, limiting the ability of many scaffolds to promote both neuron extension and Schwann cell proliferation. Therefore, the goals of this work are to develop and characterize microgel-based scaffolds that are tuned over the stiffness range relevant to neural tissue engineering and investigate Schwann cell morphology, viability, and proliferation within 3D scaffolds. Using thiol-ene reaction, microgels with surface thiols are produced and crosslinked into hydrogels using a multiarm vinylsulfone (VS). By varying the concentration of VS, scaffold stiffness ranges from 0.13 to 0.76 kPa. Cell morphology in all groups demonstrates that cells are able to spread and interact with the scaffold through day 5. Although the viability in all groups is high, proliferation of Schwann cells within the scaffold of G* = 0.53 kPa is significantly higher than other groups. This result is ≈ 5× lower than previously reported optimal stiffnesses on 2D surfaces, demonstrating the need for correlation of 3D cell response to mechanical modulus. As proliferation is the first step in Schwann cell integration into peripheral nerve conduits, these scaffolds demonstrate that the stiffness is a critical parameter to optimizing the regenerative process.

Host reaction to poly(2-hydroxyethyl methacrylate) scaffolds in a small spinal cord injury model

Tissue engineered scaffolds and matrices have been investigated over the past decade for their potential in spinal cord repair. They provide a 3-D substrate that can be permissive for nerve regeneration yet have other roles including neuroprotection, altering the inflammatory cascade and mechanically stabilizing spinal cord tissue after injury. In this study we investigated very small lesions (approx. 0.25 μL in volume) of the dorsal column into which a phase-separated poly(2-hydroxyethyl methacrylate) hydrogel scaffold is implanted. Using fluorescent immunohistochemistry to quantify glial scarring, the poly(2-hydroxyethyl methacrylate) scaffold group showed reduced intensity compared to lesion controls for GFAP and the chondroitin sulfate proteoglycan neurocan after 6 days. However, the scaffold and tissue was also pushed dorsally after 6 days while the scaffold was not integrated into the spinal cord after 28 days. Overall, this small-lesion spinal cord injury model provided information on the host tissue reaction of a TE scaffold while reducing animal discomfort and care.

Schwann cell-seeded scaffold with longitudinally oriented micro-channels for reconstruction of sciatic nerve in rats

To provide a more permissive environment for axonal regeneration, Schwann cells (SCs) were introduced into a collagen-chitosan scaffold with longitudinally oriented micro-channels (L-CCH). The SC-seeded scaffold was then used for reconstruction of a 15-mm-long sciatic nerve defect in rats. The axonal regeneration and functional recovery were examined by a combination of walking track analysis, electrophysiological assessment, Fluoro-Gold retrograde tracing, as well as morphometric analyses to both regenerated axons and target muscles. The findings showed that SCs adhered and migrated into the L-CCH scaffold and displayed a longitudinal arrangement in vitro. Axonal regeneration as well as functional recovery was in the similar range between SCs-seeded scaffold and autograft groups, which were superior to those in L-CCH scaffold alone group. These indicate that the SCs-seeded L-CCH scaffold, which resembles the microstructure as well as the permissive environment of native peripheral nerves, holds great promise in nerve regeneration therapies.

Collagen--emerging collagen based therapies hit the patient

The choice of biomaterials available for regenerative medicine continues to grow rapidly, with new materials often claiming advantages over the short-comings of those already in existence. Going back to nature, collagen is one of the most abundant proteins in mammals and its role is essential to our way of life. It can therefore be obtained from many sources including porcine, bovine, equine or human and offer a great promise as a biomimetic scaffold for regenerative medicine. Using naturally derived collagen, extracellular matrices (ECMs), as surgical materials have become established practice for a number of years. For clinical use the goal has been to preserve as much of the composition and structure of the ECM as possible without adverse effects to the recipient. This review will therefore cover in-depth both naturally and synthetically produced collagen matrices. Furthermore the production of more sophisticated three dimensional collagen scaffolds that provide cues at nano-, micro- and meso-scale for molecules, cells, proteins and bulk fluids by inducing fibrils alignments, embossing and layered configuration through the application of plastic compression technology will be discussed in details. This review will also shed light on both naturally and synthetically derived collagen products that have been available in the market for several purposes including neural repair, as cosmetic for the treatment of dermatologic defects, haemostatic agents, mucosal wound dressing and guided bone regeneration membrane. There are other several potential applications of collagen still under investigations and they are also covered in this review.

Motor outcome and allodynia are largely unaffected by novel olfactory ensheathing cell grafts to repair low-thoracic lesion gaps in the adult rat spinal cord

Olfactory ensheathing cells (OEC) are a promising graftable cell population for improving functional outcomes after experimental spinal cord injury. However only few studies have focused on experimental models with large cavitations, which require bridging substrates to transfer and maintain the donor cells within the lesion site. Here, a state-of-the-art collagen-based multi-channeled three dimensional scaffold was used to deliver olfactory ensheathing cells to 2 mm long unilateral low-thoracic hemisection cavities. For a period of 10 weeks, allodynia of the hindpaws was monitored using the von Frey hair filament test, while an extensive analysis of motor ability was performed with use of the CatWalk gait analysis system and the BBB locomotor scale. No substantial improvement or deterioration of motor functions was induced and there was no effect on lesion-induced allodynia. On the basis of these data, we conclude that relatively large spinal cord lesions with cavitation may present additional hurdles to the therapeutic effect of OEC. Future studies are needed to address the nature that such lesion cavities place on cell grafts.

Preparation of uniaxial multichannel silk fibroin scaffolds for guiding primary neurons

Physical guidance cues have been exploited to stimulate neuron adhesion and neurite outgrowth. In the present study, three-dimensional (3-D) silk fibroin scaffolds with uniaxial multichannels (42-142 μm in diameter) were prepared by a directional temperature field freezing technique, followed by lyophilization. By varying the initial silk fibroin concentration, the chemical potential and quantity of free water around cylindrical ice crystals could be controlled to control the cross-section morphology of the scaffold channels. Aligned ridges also formed on the inner surface of the multichannels in parallel to the direction of the channels. In vitro, primary hippocampal neurons were seeded in these 3-D silk fibroin scaffolds with uniaxial multichannels of ∼120 μm in diameter. The morphology of the neurons was multipolar and alignment along the scaffold channels was observed. Cell-cell networks and cell-matrix interactions established by newly formed axons were observed after 7 days in culture. These neurons expressed β-III-tubulin, nerve filament and microtubule-associated protein, while glial fibrillary acidic protein immunofluorescence was barely above background. The ridges on the inner surface of the channels played a critical role in the adhesion and extension of neurons by providing continuous contact guidance. These new 3-D silk scaffolds with uniaxial multichannels provided a favorable microenvironment for the development of hippocampal neurons by guiding axonal elongation and cell migration.

Gel microstructure regulates proliferation and differentiation of MC3T3-E1 cells encapsulated in alginate beads

For cell transplantation into damaged tissues, viable cells must be delivered to the defect site in a suitable carrier. However, the hypoxic and nutrient-limited environment in the carrier can induce massive cell death. The aims of this study were to increase the viability and regulate the behavior of osteoprogenitor cells encapsulated in alginate hydrogels through control of the gel microstructure. Cell survivability in alginate beads was improved through the use of α-MEM as the solvent for alginic acid sodium salt, and by CaCl(2) solutions, which supplied additional nutrients for the cells compared to water or buffer. The mesh size and shear modulus of the hydrogel were hypothesized to regulate proliferation and differentiation of osteoprogenitor cells. MC3T3-E1 cells demonstrated enhanced osteoblast differentiation when encapsulated in high-density alginate with smaller mesh size and more rigid mechanical properties, as confirmed by increased alkaline phosphatase activity and osteocalcin secretion. However, MC3T3-E1 cells encapsulated in low-density alginate beads with a larger mesh size and more compliant mechanical properties exhibited increased proliferation. These results demonstrate that the microstructure of alginate hydrogels can regulate the behavior of osteoprogenitor cells, thus suggesting that the tuning the properties of the gel may be a useful approach for enhancing new bone formation.

In vivo biofunctionality comparison of different topographic PLLA scaffolds

In this work, the in vivo biodegradation of, biocompatibility of, and host response to various topographic scaffolds were investigated. Randomly oriented fibrous poly(L-lactide) (PLLA) nanofibers were fabricated using the electrospinning technique. A PLLA scaffold was obtained by salt leaching. Both the electrospun PLLA nanofibers and the salt-leaching PLLA scaffolds formed three-dimensional pore structures. Cytotoxicity studies, in which rat muscle-derived stem cells (rMDSCs) were grown on electrospun PLLA nanofibers or the salt-leaching PLLA scaffolds, revealed that the rMDSCs cell count on the PLLA nanofibers was slightly higher than that on the salt-leaching PLLA scaffolds. An in vivo study was carried out by implanting the scaffolds subcutaneously into rats to test the biodegradation, biocompatibility, and host response at regular intervals over 0-4 weeks. The degradation of the PLLA nanofibers 1, 2, and 4 weeks after initial implantation was more extensive than that observed for the salt-leaching PLLA scaffolds. PLLA nanofibers seeded the growth of larger fibrous tissue masses due to in vivo cellular infiltration into the randomly oriented fibrillar structures of the PLLA nanofibers. In addition, the inflammatory cell accumulation in PLLA nanofibers was lower than that in the salt-leaching PLLA scaffolds. These results indicate that the electrospun PLLA nanofibers may serve as a good scaffold to elicit fibrous cellular infiltration, to minimize host response, and to enhance tissue-scaffold integration.

A novel mixed-type stem cell pellet for cementum/periodontal ligament-like complex

BACKGROUND

Functional tissue regeneration underscores the construction of favorable extracellular matrix environment and neovascularization. In this study, we propose a mixed-type stem cell-pellet cultivation system for human periodontal ligament stem cells (hPDLSCs) to recreate a favorable regeneration microenvironment.

METHODS

The hPDLSCs were cocultured with human bone marrow mesenchymal stem cells (hBMMSCs) and mixed by osteoinduced ceramic bovine bone (CBB) powder as a mixed-type stem cell sheet. The influence of osteoinduced CBB on hPDLSCs was analyzed by alkaline phosphatase (ALP) and osteogenic differentiation assays. The effects of hBMMSCs on hPDLSCs were estimated by proliferating cell nuclear antigen, ALP, real-time reverse transcription polymerase chain reaction, and Western blot assays. The mixed-cell sheet was the preliminary observations in vitro that laid the foundation for additional implantation. After the cells were detached, the mixed-type sheet spontaneously contracted to produce a mixed-type stem cell pellet, which was transplanted into immunocompromised mice.

RESULTS

In vitro, the results showed that osteoinduced CBB could upregulate ALP activity and accelerate mineralization of hPDLSCs. When the hPDLSCs were cocultured with hBMMSCs, the ALP activity and proliferation kinetics were upregulated and also indicated in the expression of collagen I, osteocalcin, and vascular endothelial growth factor. It was found that, in vivo, the mixed-type hPDLSC pellets support cementum/periodontal ligament (PDL)-like tissue regeneration with neovascularization.

CONCLUSIONS

These results suggest that the mixed-type hPDLSC pellet could mimic the microenvironment of PDL and enhance the reconstruction of physiologic architecture of a dental cementum/PDL-like complex. This tissue mimicking may also be a promising alternative to promote periodontal defect repair for additional clinical applications.

Repairing injured peripheral nerves: Bridging the gap

Peripheral nerve injuries that induce gaps larger than 1-2 cm require bridging strategies for repair. Autologous nerve grafts are still the gold standard for such interventions, although alternative treatments, as well as treatments to improve the therapeutic efficacy of autologous nerve grafting are generating increasing interest. Investigations are still mostly experimental, although some clinical studies have been undertaken. In this review, we aim to describe the developments in bridging technology which aim to replace the autograft. A multi-disciplinary approach is of utmost importance to develop and optimise treatments of the most challenging peripheral nerve injuries.