Ruthenium-catalyzed photo cross-linking of fibrin-based engineered tissue

Enhancing visible light-induced 3D bioprinting: alternating extruded support materials for bioink gelation

In 3D bioprinting, two promising approaches have gained significant attention: the use of support materials during printing and the utilization of bioinks gelled through ruthenium(II) tris-bipyridyl dication ([Ru(bpy)3]2+)-catalyzed photocrosslinking consuming sodium persulfate (SPS). Integrating these approaches while ensuring simplicity and printability remains a challenge. To address this challenge, we propose a technique in which the support material containing SPS is alternately extruded with the bioink containing polymer having phenolic hydroxyl moieties (polymer-Ph) and [Ru(bpy)3]2+under visible light irradiation. This method eliminates the problems of light shading and deformation caused by the support material, as the contact between the alternately extruded ink and the support material initiates the gelation of the ink via photocrosslinking. Using an ink containing 0.5 w/v% hyaluronic acid with phenolic hydroxyl moieties (HA-Ph) and 2.0 mM [Ru(bpy)3]2+alongside a support material containing 10 mM SPS, various constructs were successfully printed under 450 nm visible light. The human hepatoblastoma cells embedded in the printed construct showed approximately 95% viability after printing and proliferation over 14 d of culture. These results highlight the potential of this method to advance 3D bioprinting for tissue engineering applications.

Di-Tyrosine Cross-Linking of Elastin-Like Polypeptides through Ruthenium Photoreaction To Form Scaffolds: Fine Tuning Mechanical Properties and Improving Cytocompatibility

Ensuring that the mechanical properties of tissue engineering scaffolds align with those of the target tissues is crucial for their successful integration and functional performance. Tyrosine-tyrosine cross-links are found in nature in numerous proteins including resilin that exhibit enhanced toughness and energy storage capacity. Herein, we investigated the potential of tuning the mechanical properties of scaffolds made from elastin-like polypeptides (ELPs) containing tyrosine residues. Ruthenium-based photoreaction was used to form tyrosine cross-links. To enhance the cytocompatibility of the ELP scaffold, a continuous mode of washing was developed to remove residual ruthenium from the scaffolds. The continuous mode of washing was significantly superior in removing ruthenium and did so in a significantly shorter time as compared to batch washing and the conventional semibatch washing (also called dialysis washing). The range of storage moduli of the fabricated scaffolds spanned tens of Pa to hundreds of kPa. Human fibroblast cells were found to grow in the scaffolds and proliferate. Overall, this work offers a rationale for further developing tyrosine cross-linked ELPs for a broad range of tissue engineering applications.

Bioprinting approaches in cardiac tissue engineering to reproduce blood-pumping heart function

The heart, with its complex structural and functional characteristics, plays a critical role in sustaining life by pumping blood throughout the entire body to supply nutrients and oxygen. Engineered heart tissues have been introduced to reproduce heart functions to understand the pathophysiological properties of the heart and to test and develop potential therapeutics. Although numerous studies have been conducted in various fields to increase the functionality of heart tissue to be similar to reality, there are still many difficulties in reproducing the blood-pumping function of the heart. In this review, we discuss advancements in cells, biomaterials, and biofabrication in cardiac tissue engineering to achieve cardiac models that closely mimic the pumping function. Moreover, we provide insight into future directions by proposing future perspectives to overcome remaining challenges, such as scaling up and biomimetic patterning of blood vessels and nerves through bioprinting.

FRESH 3D Bioprinting of Collagen Types I, II, and III

Collagens play a vital role in the mechanical integrity of tissues as well as in physical and chemical signaling throughout the body. As such, collagens are widely used biomaterials in tissue engineering; however, most 3D fabrication methods use only collagen type I and are restricted to simple cast or molded geometries that are not representative of native tissue. Freeform reversible embedding of suspended hydrogel (FRESH) 3D bioprinting has emerged as a method to fabricate complex 3D scaffolds from collagen I but has yet to be leveraged for other collagen isoforms. Here, we developed collagen type II, collagen type III, and combination bioinks for FRESH 3D bioprinting of millimeter-sized scaffolds with micrometer scale features with fidelity comparable to scaffolds fabricated with the established collagen I bioink. At the microscale, single filament extrusions were similar across all collagen bioinks with a nominal diameter of ∼100 μm using a 34-gauge needle. Scaffolds as large as 10 × 10 × 2 mm were also fabricated and showed similar overall resolution and fidelity across collagen bioinks. Finally, cell adhesion and growth on the different collagen bioinks as either cast or FRESH 3D bioprinted scaffolds were compared and found to support similar growth behaviors. In total, our results expand the range of collagen isoform bioinks that can be 3D bioprinted and demonstrate that collagen types I, II, III, and combinations thereof can all be FRESH printed with high fidelity and comparable biological response. This serves to expand the toolkit for the fabrication of tailored collagen scaffolds that can better recapitulate the extracellular matrix properties of specific tissue types.

FRESH extrusion 3D printing of type-1 collagen hydrogels photocrosslinked using ruthenium

The extrusion bioprinting of collagen material has many applications relevant to tissue engineering and regenerative medicine. Freeform Reversible Embedding of Suspended Hydrogels (FRESH) technology is capable of 3D printing collagen material with the specifications and details needed for precise tissue guidance, a crucial requirement for effective tissue repair. While FRESH has shown repeated success and reliability for extrusion printing, the mechanical properties of completed collagen prints can be improved further by post-print crosslinking methodologies. Photoinitiator-based crosslinking methods are simple and have proven effective in strengthening protein-based materials. The ruthenium and sodium persulfate photoinitiator system (Ru(bpy)3/SPS) has been suggested as an effective crosslinking method for collagen materials. Herein, we describe the procedure our group has developed to combine extrusion-based 3D printing of type-1 collagen using FRESH technology with Ru(bpy)3/SPS photoinitiated crosslinking methods to improve the strength and stability of 3D printed collagen structures. Mechanical testing and cell biocompatibility assessments were performed to investigate the impact of Ru(bpy)3/SPS photoinitiated crosslinking and highlight the potential limitations of this method. These results demonstrate a significant improvement in the compressive strength of type-1 collagen samples as the Ru(bpy)3/SPS concentration increases. Additionally, type-1 collagen samples crosslinked with up to 1/10 mM Ru(bpy)3/SPS support PC12 cell viability over a period of 7 days. The primary limitations that were observed and described in detail in this protocol are: the FRESH slurry preparation, printing environment, extrusion printer hardware, and quality of the ruthenium reagent.

A unique and biocompatible corneal collagen crosslinking in vivo

Corneal crosslinking (CXL) is a widely applied technique to halt the progression of ectatic diseases through increasing the thickness and mechanical stiffness of the cornea. This study investigated the biocompatibility and efficiency of a novel CXL procedure using ruthenium and blue light in rat corneas and evaluated parameters important for clinical application. To perform the CXL procedure, the corneal epithelium of rats was removed under anaesthesia, followed by the application of a solution containing ruthenium and sodium persulfate (SPS). The corneas were then exposed to blue light at 430 nm at 3 mW/cm2 for 5 min. Rat corneas were examined and evaluated for corneal opacity, corneal and limbal neovascularization, and corneal epithelial regeneration on days 0, 1, 3, 6, 8, and 14. On day 28, the corneas were isolated for subsequent tissue follow-up and analysis. CXL with ruthenium and blue light showed rapid epithelial healing, with 100% regeneration of the corneal epithelium and no corneal opacity on day 6. The ruthenium group also exhibited significantly reduced corneal (p < 0.01) and limbal neovascularization (p < 0.001). Histological analysis revealed no signs of cellular damage or apoptosis, which further confirms the biocompatibility and nontoxicity of our method. Confocal and scanning electron microscopy (SEM) images confirmed high density of collagen fibrils, indicating efficient crosslinking and enhanced structural integrity. This study is unique that demonstrates in vivo safety, biocompatibility, and functionality of ruthenium and blue light CXL. This approach can prevent toxicity caused by UV-A light and can be an immediate alternative compared to the existing crosslinking procedures that have side effects and clinical risks for the patients.

Local photo-crosslinking of native tissue matrix regulates cell function

Within most tissues, the extracellular microenvironment provides mechanical cues that guide cell fate and function. Changes in the extracellular matrix such as aberrant deposition, densification and increased crosslinking are hallmarks of late-stage fibrotic diseases that often lead to organ dysfunction. Biomaterials have been widely used to mimic the mechanical properties of the fibrotic matrix and study cell function. However, the initiation of fibrosis has largely been overlooked, due to the challenges in recapitulating early fibrotic lesions within the native extracellular microenvironment. Using visible light mediated photochemistry, we induced local crosslinking and stiffening of extracellular matrix proteins within ex vivo murine and human tissue. In ex vivo lung tissue of epithelial cell lineage-traced mice, local matrix crosslinking mimicked early fibrotic lesions that increased alveolar epithelial cell spreading, differentiation and extracellular matrix remodeling. However, inhibition of cytoskeletal tension or integrin engagement reduced epithelial cell spreading and differentiation, resulting in alveolar epithelial cell dedifferentiation and reduced extracellular matrix deposition. Our findings emphasize the role of local extracellular matrix crosslinking and remodeling in early-stage tissue fibrosis and have implications for ex vivo disease modeling and applications to other tissues.

Recombinant Human Keratinocyte Growth Factor Ameliorates Cancer Treatment-Induced Oral Mucositis on a Chip

Oral mucositis (OM) is a severe complication of cancer therapies caused by off-target cytotoxicity. Palifermin, which is recombinant human keratinocyte growth factor (KGF), is currently the only mitigating treatment available to a subset of OM patients. This study used a previously established model of oral mucositis on a chip (OM-OC) comprised of a confluent human gingival keratinocytes (GIE) layer attached to a basement membrane-lined subepithelial layer consisting of human gingival fibroblasts (HGF) and human dermal microvascular endothelial cells (HMEC) on a stable collagen I gel. Cisplatin, radiation, and combined treatments are followed by a recovery period in the OM-OC to determine possible cellular and molecular mechanisms of OM under effects of KGF. Cancer treatments affected the keratinocyte layer, causing death and epithelial barrier loss. Both keratinocytes and subepithelial cells died rapidly, as evidenced by propidium iodide staining. In response to radiation exposure, cell death occurred in the apical epithelial layer, predominantly, within 24h. Cisplatin exposure predominantly promoted death of basal epithelial cells within 32-36h. Presence of KGF in OM-OC protected tissues from damage caused by cancer treatments in a dose-dependent manner, being more effective at 10 ng/mL. As verified by F-actin staining and the Alamar Blue assay, KGF contributed to epithelial survival and induced proliferation of GIE and HGF as well as HMEC within 120h. When the expression of eighty inflammatory cytokines is evaluated at OM induction (Day 12) and resolution (Day 18) stages in OM-OC, some cytokines are identified as potential novel therapeutic targets. In comparison with chemoradiation exposure, KGF treatment showed a trend to decrease IL-8 and TNF-a expression at Day 12 and 18, and TGF-β1 at Day 18 in OM-OC. Taken together, these findings support the utility of OM-OC as a platform to model epithelial damage and evaluate molecular mechanisms following OM treatment.

An artificial metalloenzyme that can oxidize water photocatalytically: design, synthesis, and characterization

In nature, light-driven water oxidation (WO) catalysis is performed by photosystem II via the delicate interplay of different cofactors positioned in its protein scaffold. Artificial systems for homogeneous photocatalytic WO are based on small molecules that often have limited solubility in aqueous solutions. In this work, we alleviated this issue and present a cobalt-based WO-catalyst containing artificial metalloenzyme (ArM) that is active in light-driven, homogeneous WO catalysis in neutral-pH aqueous solutions. A haem-containing electron transfer protein, cytochrome B5 (CB5), served to host a first-row transition-metal-based WO catalyst, CoSalen (CoIISalen, where H2Salen = N,N'-bis(salicylidene)ethylenediamine), thus producing an ArM capable of driving photocatalytic WO. The CoSalen ArM formed a water-soluble pre-catalyst in the presence of [Ru(bpy)3](ClO4)2 as photosensitizer and Na2S2O8 as the sacrificial electron acceptor, with photocatalytic activity similar to that of free CoSalen. During photocatalysis, the CoSalen-protein interactions were destabilized, and the protein partially unfolded. Rather than forming tens of nanometer sized CoOx nanoparticles as free CoSalen does under photocatalytic WO conditions, the CB5 : CoSalen ArM showed limited protein cross-linking and remained soluble. We conclude that a weak, dynamic interaction between a soluble cobalt species and apoCB5 was formed, which generated a catalytically active adduct during photocatalysis. A detailed analysis was performed on protein stability and decomposition processes during the harsh oxidizing reaction conditions of WO, which will serve for the future design of WO ArMs with improved activity and stability.

Mechanisms of hydrogel-based microRNA delivery systems and its application strategies in targeting inflammatory diseases

Hydrogels, composed of three-dimensional polymer networks, are excellent delivery carriers and have been extensively employed in the biomedical field. Inflammation acts as a protective mechanism to prevent harmful substances from entering living organisms, but chronic, long-lasting inflammation can cause oxidative stress, which damages tissue and organs and adversely affects patients' quality of life. The aberrant expression of microRNAs (miRNAs) has been found to play a significant part in the etiology and progression of inflammatory diseases, as suggested by growing evidence. Numerous hydrogels that can act as gene carriers for the intracellular delivery of miRNA have been described during ongoing research into innovative hydrogel materials. MiRNA hydrogel delivery systems, which are loaded with exogenous miRNA inhibitors or mimics, enable targeted miRNA intervention in inflammatory diseases and effectively prevent environmental stressors from degrading or inactivating miRNA. In this review, we summarize the classification of miRNA hydrogel delivery systems, the basic strategies and mechanisms for loading miRNAs into hydrogels, highlight the biomedical applications of miRNA hydrogel delivery systems in inflammatory diseases, and share our viewpoints on potential opportunities and challenges in the promising region of miRNA delivery systems. These findings may provide a new theoretical basis for the prevention and treatment of inflammation-related diseases and lay the foundation for clinical translation.

Application of Hydrogels in Cardiac Regeneration

Myocardial infarction (MI) is a leading cause of death globally. Due to limited cardiac regeneration, infarcted myocardial tissue is gradually replaced by cardiac fibrosis, causing cardiac dysfunction, arrhythmia, aneurysm, free wall rupture, and sudden cardiac death. Thus, the development of effective methods to promote cardiac regeneration is extremely important for MI treatment. In recent years, hydrogels have shown promise in various methods for cardiac regeneration. Hydrogels can be divided into natural and synthetic types. Different hydrogels have different features and can be cross-linked in various ways. Hydrogels are low in toxicity and highly stable. Since they have good biocompatibility, biodegradability, and transformability, moderate mechanical properties, and proper elasticity, hydrogels are promising biomaterials for promoting cardiac regeneration. They can be used not only as scaffolds for migration of stem cells, but also as ideal carriers for delivery of drugs, genetic materials, stem cells, growth factors, cytokines, and small molecules. In this review, the application of hydrogels in cardiac regeneration during or post-MI is discussed in detail. Hydrogels open a promising new area in cardiac regeneration for treating MI.

Strategies for improving the 3D printability of decellularized extracellular matrix bioink

3D bioprinting is a revolutionary technology capable of replicating native tissue and organ microenvironments by precisely placing cells into 3D structures using bioinks. However, acquiring the ideal bioink to manufacture biomimetic constructs is challenging. A natural extracellular matrix (ECM) is an organ-specific material that provides physical, chemical, biological, and mechanical cues that are hard to mimic using a small number of components. Organ-derived decellularized ECM (dECM) bioink is revolutionary and has optimal biomimetic properties. However, dECM is always "non-printable" owing to its poor mechanical properties. Recent studies have focused on strategies to improve the 3D printability of dECM bioink. In this review, we highlight the decellularization methods and procedures used to produce these bioinks, effective methods to improve their printability, and recent advances in tissue regeneration using dECM-based bioinks. Finally, we discuss the challenges associated with manufacturing dECM bioinks and their potential large-scale applications.

White-light crosslinkable milk protein bioadhesive with ultrafast gelation for first-aid wound treatment

BACKGROUND

Post-traumatic massive hemorrhage demands immediately available first-aid supplies with reduced operation time and good surgical compliance. In-situ crosslinking gels that are flexibly adapting to the wound shape have a promising potential, but it is still hard to achieve fast gelation, on-demand adhesion, and wide feasibility at the same time.

METHODS

A white-light crosslinkable natural milk-derived casein hydrogel bioadhesive is presented for the first time. Benefiting from abundant tyrosine residues, casein hydrogel bioadhesive was synthesized by forming di-tyrosine bonds under white light with a ruthenium-based catalyst. We firstly optimized the concentration of proteins and initiators to achieve faster gelation and higher mechanical strength. Then, we examined the degradation, cytotoxicity, tissue adhesion, hemostasis, and wound healing ability of the casein hydrogels to study their potential to be used as bioadhesives.

RESULT

Rapid gelation of casein hydrogel is initiated with an outdoor flashlight, a cellphone flashlight, or an endoscopy lamp, which facilitates its usage during first-aid and minimally invasive operations. The rapid gelation enables 3D printing of the casein hydrogel and excellent hemostasis even during liver hemorrhage due to section injury. The covalent binding between casein and tissue enables robust adhesion which can withstand more than 180 mmHg blood pressure. Moreover, the casein-based hydrogel can facilitate post-traumatic wound healing caused by trauma due to its biocompatibility.

CONCLUSION

Casein-based bioadhesives developed in this study pave a way for broad and practical application in emergency wound management.

Oral mucositis on a chip: modeling induction by chemo- and radiation treatments and recovery

Oral mucositis (OM) is a debilitating complication affecting roughly 70% of head and neck cancer patients receiving chemotherapy and/or radiation treatment. No broadly effective preventative treatment for OM exists. Therefore, anin vitromodel of cancer treatment-induced OM would aid studies into possible origins of the pathology and future drug targets to ameliorate it. In this study, we present a microfluidic oral mucosa triculture tissue construct consisting of a keratinocyte layer attached to a subepithelial fibroblast and endothelial cell-embedded collagen gel. To address the typically low stability of mucosal constructs in microfluidics, ruthenium-catalyzed photocrosslinking was implemented to strengthen the collagen gel and prevent the invasion of keratinocytes, thus maintaining tissue construct geometry and oral mucosa barrier function for over 18 d of culture. Next, the OM chip was exposed to cisplatin (day 10) and damaging radiation (day 11, ± cisplatin at day 10), mimicking damage from cancer therapy. Damage to and then recovery of the tissue layers and function were observed over days 11-18. Therefore, several important features of OM induction and resolution were modeled in microfluidic culture. The OM model on a chip allows for more sophisticated studies into mechanisms of OM and potential treatments.

Medical Adhesives and Their Role in Laparoscopic Surgery—A Review of Literature

Laparoscopic surgery is undergoing rapid development. Replacing the traditional method of joining cut tissues with sutures or staples could greatly simplify and speed up laparoscopic procedures. This alternative could undoubtedly be adhesives. For decades, scientists have been working on a material to bond tissues together to create the best possible conditions for tissue regeneration. The results of research on tissue adhesives achieved over the past years show comparable treatment effects to traditional methods. Tissue adhesives are a good alternative to surgical sutures in wound closure. This article is a review of the most important groups of tissue adhesives including their properties and possible applications. Recent reports on the development of biological adhesives are also discussed.

Ruthenium-induced corneal collagen crosslinking under visible light

Corneal collagen crosslinking (CXL) is a commonly used minimally invasive surgical technique to prevent the progression of corneal ectasias, such as keratoconus. Unfortunately, riboflavin/UV-A light-based CXL procedures have not been successfully applied to all patients, and result in frequent complications, such as corneal haze and endothelial damage. We propose a new method for corneal crosslinking by using a Ruthenium (Ru) based water-soluble photoinitiator and visible light (430 nm). Tris(bipyridine)ruthenium(II) ([Ru(bpy)₃]²⁺) and sodium persulfate (SPS) mixture covalently crosslinks free tyrosine, histidine, and lysine groups under visible light (400-450 nm), which prevents UV-A light-induced cytotoxicity in an efficient and time saving collagen crosslinking procedure. In this study, we investigated the effects of the Ru/visible blue light procedure on the viability and toxicity of human corneal epithelium, limbal, and stromal cells. Then bovine corneas crosslinked with ruthenium mixture and visible light were characterized, and their biomechanical properties were compared with the customized riboflavin/UV-A crosslinking approach in the clinics. Crosslinked corneas with a ruthenium-based CXL approach showed significantly higher young's modulus compared to riboflavin/UV-A light-based method applied to corneas. In addition, crosslinked corneas with both methods were characterized to evaluate the hydrodynamic behavior, optical transparency, and enzymatic resistance. In all biomechanical, biochemical, and optical tests used here, corneas that were crosslinked with ruthenium-based approach demonstrated better results than that of corneas crosslinked with riboflavin/ UV-A. This study is promising to be translated into a non-surgical therapy for all ectatic corneal pathologies as a result of mild conditions introduced here with visible light exposure and a nontoxic ruthenium-based photoinitiator to the cornea. STATEMENT OF SIGNIFICANCE: Keratoconus, one of the most frequent corneal diseases, could be treated with riboflavin and ultraviolet light-based photo-crosslinking application to the cornea of the patients. Unfortunately, this method has irreversible side effects and cannot be applied to all keratoconus patients. In this study, we exploited the photoactivation behavior of an organoruthenium compound to achieve corneal crosslinking. Ruthenium-based organic complex under visible light demonstrated significantly better biocompatibility and superior biomechanical results than riboflavin and ultraviolet light application. This study promises to translate into a new fast, efficient non-surgical therapy option for all ectatic corneal pathologies.

Hydrogels for Tissue Engineering: Addressing Key Design Needs Toward Clinical Translation

Collapse

Patterned photocrosslinking to establish stiffness anisotropies in fibrous 3D hydrogels

Cells are known to constantly interact with their local extracellular matrix (ECM) and respond to a variety of biochemical and mechanical cues received from the ECM. Nonetheless, comprehensive understanding of cell-ECM interactions has been elusive. Many studies rely on analysis of cell behavior on 2D substrates, which do not reflect a natural cell environment. Further, lack of dynamic control over local stiffness anisotropies and fiber alignment hinders progress in studies in naturally derived fibrous 3D cultures. Here, we present a cell-safe method of patterned photocrosslinking, which can aid in studying biological hypotheses related to mechanotransduction in 3D hydrogels. As previously described by our group, ruthenium-catalyzed photocrosslinking (RCP) of selected ECM regions promotes localized increase in stiffness mediated by focused blue laser light in a confocal microscope. In this study, we further demonstrate that RCP can induce localized strain stiffening and fiber alignment outside of the selected crosslinked region and induce stiffness anisotropy biased towards the direction of fiber alignment. MDA-MB-231 cells are shown to respond to RCP-induced changes in local ECM architecture and display directional bias towards the direction of fiber alignment, as compared to control cells. Further, the effect of patterned crosslinking on a stiffness landscape is measured using multi-axes optical tweezers active microrheology (AMR) with backscattered laser beam illumination. AMR validates RCP as a suitable tool for creating distinct stiffness anisotropies which promote directed migration of cells, further underscoring the usefulness of RCP in cell-ECM studies. STATEMENT OF SIGNIFICANCE: Studies on cell-ECM interactions in 3D cultures have often been hindered by the lack of available tools to dynamically alter local ECM stiffness and fiber alignment. Here, we present a non-invasive, cell-safe and easily applicable method of patterned photocrosslinking, which can aid in studying biological hypotheses in fibrous 3D hydrogels. Ruthenium-catalyzed crosslinking (RCP) of selected fibrin ECM regions promotes localized increase in stiffness and creates distinct stiffness anisotropies in the presence of the focused blue laser light. Outside of the crosslinked region, RCP causes fiber alignment and strain stiffening in the ECM, verified using multi-axes optical tweezers active microrheology (AMR). Following RCP, human breast cancer MDA-MB-231 exhibit directed cell migration, validating usefulness of this method in cell-ECM studies.

Stereolithographic Visible-Light Printing of Poly(l-glutamic acid) Hydrogel Scaffolds

Bioprinting is a promising fabrication technique aimed at developing biologically functional, tissue-like constructs for various biomedical applications. Among the different bioprinting approaches, vat polymerization-based techniques offer the highest feature resolution compared to more commonly used extrusion-based methods and therefore have greater potential to be utilized for printing complex hierarchical tissue architectures. Although significant efforts have been directed toward harnessing digital light processing techniques for high-resolution bioprinting, the use of stereolithography (SLA) setups for producing distinct hydrogel filaments smaller than 20 μm has received less attention. Improving the bioprinting resolution is still a technical challenge that must consider both the practical limitations of the bioprinter apparatus and the formulation of the cytocompatible bioresin. In this study, we developed a novel bioresin compatible with SLA and capable of printing high-resolution features. This resin, composed of a biosynthetic polypeptide poly(l-glutamic acid) functionalized with tyramine moieties (PLGA-Tyr), was crosslinked using a visible-light photoinitiator system. Varying concentrations of PLGA-Tyr and the co-photoinitiator were evaluated for the hydrogel system's gelation ability, swelling characteristics, degradation profiles, mechanical properties, and cell viability post-encapsulation. This study introduces a custom-built, cost-effective, visible-light SLA bioprinting system named the "MicroNC". Using the newly developed visible-light bioresin, we demonstrated for the first time the ability to fabricate hydrogel scaffolds with well-resolved filaments (less than 8 μm in width) capable of supporting cell viability and proliferation and directing cellular morphology at the single-cell level for up to 14 days. Overall, these experiments have underscored the exciting potential of using the visible-light-photoinitiated PLGA-Tyr material system for developing physiologically relevant in vitro hydrogel scaffolds with feature resolutions comparable to the dimensions of individual human cells for a wide range of biomedical applications.

Photochemical and Electrochemical Applications of Proton-Coupled Electron Transfer in Organic Synthesis

We present here a review of the photochemical and electrochemical applications of multi-site proton-coupled electron transfer (MS-PCET) in organic synthesis. MS-PCETs are redox mechanisms in which both an electron and a proton are exchanged together, often in a concerted elementary step. As such, MS-PCET can function as a non-classical mechanism for homolytic bond activation, providing opportunities to generate synthetically useful free radical intermediates directly from a wide variety of common organic functional groups. We present an introduction to MS-PCET and a practitioner's guide to reaction design, with an emphasis on the unique energetic and selectivity features that are characteristic of this reaction class. We then present chapters on oxidative N-H, O-H, S-H, and C-H bond homolysis methods, for the generation of the corresponding neutral radical species. Then, chapters for reductive PCET activations involving carbonyl, imine, other X═Y π-systems, and heteroarenes, where neutral ketyl, α-amino, and heteroarene-derived radicals can be generated. Finally, we present chapters on the applications of MS-PCET in asymmetric catalysis and in materials and device applications. Within each chapter, we subdivide by the functional group undergoing homolysis, and thereafter by the type of transformation being promoted. Methods published prior to the end of December 2020 are presented.

Visible-Light-Mediated Modification and Manipulation of Biomacromolecules

Chemically modified biomacromolecules-i.e., proteins, nucleic acids, glycans, and lipids-have become crucial tools in chemical biology. They are extensively used not only to elucidate cellular processes but also in industrial applications, particularly in the context of biopharmaceuticals. In order to enable maximum scope for optimization, it is pivotal to have a diverse array of biomacromolecule modification methods at one's disposal. Chemistry has driven many significant advances in this area, and especially recently, numerous novel visible-light-induced photochemical approaches have emerged. In these reactions, light serves as an external source of energy, enabling access to highly reactive intermediates under exceedingly mild conditions and with exquisite spatiotemporal control. While UV-induced transformations on biomacromolecules date back decades, visible light has the unmistakable advantage of being considerably more biocompatible, and a spectrum of visible-light-driven methods is now available, chiefly for proteins and nucleic acids. This review will discuss modifications of native functional groups (FGs), including functionalization, labeling, and cross-linking techniques as well as the utility of oxidative degradation mediated by photochemically generated reactive oxygen species. Furthermore, transformations at non-native, bioorthogonal FGs on biomacromolecules will be addressed, including photoclick chemistry and DNA-encoded library synthesis as well as methods that allow manipulation of the activity of a biomacromolecule.

Cell contact guidance via sensing anisotropy of network mechanical resistance

Despite the ubiquitous importance of cell contact guidance, the signal-inducing contact guidance of mammalian cells in an aligned fibril network has defied elucidation. This is due to multiple interdependent signals that an aligned fibril network presents to cells, including, at least, anisotropy of adhesion, porosity, and mechanical resistance. By forming aligned fibrin gels with the same alignment strength, but cross-linked to different extents, the anisotropic mechanical resistance hypothesis of contact guidance was tested for human dermal fibroblasts. The cross-linking was shown to increase the mechanical resistance anisotropy, without detectable change in network microstructure and without change in cell adhesion to the cross-linked fibrin gel. This methodology thus isolated anisotropic mechanical resistance as a variable for fixed anisotropy of adhesion and porosity. The mechanical resistance anisotropy |Y*| ^-1 - |X*| ^-1 increased over fourfold in terms of the Fourier magnitudes of microbead displacement |X*| and |Y*| at the drive frequency with respect to alignment direction Y obtained by optical forces in active microrheology. Cells were found to exhibit stronger contact guidance in the cross-linked gels possessing greater mechanical resistance anisotropy: the cell anisotropy index based on the tensor of cell orientation, which has a range 0 to 1, increased by 18% with the fourfold increase in mechanical resistance anisotropy. We also show that modulation of adhesion via function-blocking antibodies can modulate the guidance response, suggesting a concomitant role of cell adhesion. These results indicate that fibroblasts can exhibit contact guidance in aligned fibril networks by sensing anisotropy of network mechanical resistance.

Recent Advances in 3D Printing with Protein-Based Inks

Three-dimensional (3D) printing is a transformative manufacturing strategy, allowing rapid prototyping, customization, and flexible manipulation of structure-property relationships. Proteins are particularly appealing to formulate inks for 3D printing as they serve as essential structural components of living systems, provide a support presence in and around cells and for tissue functions, and also provide the basis for many essential ex vivo secreted structures in nature. Protein-based inks are beneficial in vivo due to their mechanics, chemical and physical match to the specific tissue, and full degradability, while also to promoting implant-host integration and serving as an interface between technology and biology. Exploiting the biological, chemical, and physical features of protein-based inks can provide key opportunities to meet the needs of tissue engineering and regenerative medicine. Despite these benefits, protein-based inks impose nontrivial challenges to 3D printing such as concentration and rheological features and reconstitution of the structural hierarchy observed in nature that is a source of the robust mechanics and functions of these materials. This review introduces photo-crosslinking mechanisms and rheological principles that underpins a variety of 3D printing techniques. The review also highlights recent advances in the design, development, and biomedical utility of monolithic and composite inks from a range of proteins, including collagen, silk, fibrinogen, and others. One particular focus throughout the review is to introduce unique material characteristics of proteins, including amino acid sequences, molecular assembly, and secondary conformations, which are useful for designing printing inks and for controlling the printed structures. Future perspectives of 3D printing with protein-based inks are also provided to support the promising spectrum of biomedical research accessible to these materials.

Interrogating biological systems using visible-light-powered catalysis

Light-powered catalysis has found broad utility as a chemical transformation strategy, with widespread impact on energy, environment, drug discovery and human health. A noteworthy application impacting human health is light-induced sensitization of cofactors for photodynamic therapy in cancer treatment. The clinical adoption of this photosensitization approach has inspired the search for other photochemical methods, such as photoredox catalysis, to influence biological discovery. Over the past decade, light-mediated catalysis has enabled the discovery of valuable synthetic transformations, propelling it to become a highly utilized chemical synthesis strategy. The reaction components required to achieve a photoredox reaction are identical to photosensitization (catalyst, light source and substrate), making it ideally suited for probing biological environments. In this Review, we discuss the therapeutic application of photosensitization and advancements made in developing next-generation catalysts. We then highlight emerging uses of photoredox catalytic methods for protein bioconjugation and probing complex cellular environments in living cells.

Oxidative Photocatalytic Homo- and Cross-Coupling of Phenols: Nonenzymatic, Catalytic Method for Coupling Tyrosine

The oxidative photocatalytic method for phenol-phenol homo-coupling and cross-coupling is described and isolated yields of 16-97% are obtained. Measured oxidation potentials and computed nucleophilicity parameters support a mechanism of nucleophilic attack of one partner onto the oxidized neutral radical form of the other partner. Understanding of this model permitted development of cross-coupling reactions between nucleophilic phenols/arenes and easily oxidized phenols with high selectivity and efficiency. A highlight of this method is that one equivalent of each coupling partner is utilized. Building on these findings, a non-enzymatic, catalytic method for coupling tyrosine was also developed.

Photo-Crosslinked Silk Fibroin for 3D Printing

Silk fibroin in material formats provides robust mechanical properties, and thus is a promising protein for 3D printing inks for a range of applications, including tissue engineering, bioelectronics, and bio-optics. Among the various crosslinking mechanisms, photo-crosslinking is particularly useful for 3D printing with silk fibroin inks due to the rapid kinetics, tunable crosslinking dynamics, light-assisted shape control, and the option to use visible light as a biocompatible processing condition. Multiple photo-crosslinking approaches have been applied to native or chemically modified silk fibroin, including photo-oxidation and free radical methacrylate polymerization. The molecular characteristics of silk fibroin, i.e., conformational polymorphism, provide a unique method for crosslinking and microfabrication via light. The molecular design features of silk fibroin inks and the exploitation of photo-crosslinking mechanisms suggest the exciting potential for meeting many biomedical needs in the future.

One-Step Photoactivation of a Dual-Functionalized Bioink as Cell Carrier and Cartilage-Binding Glue for Chondral Regeneration

Cartilage defects can result in pain, disability, and osteoarthritis. Hydrogels providing a chondroregeneration-permissive environment are often mechanically weak and display poor lateral integration into the surrounding cartilage. This study develops a visible-light responsive gelatin ink with enhanced interactions with the native tissue, and potential for intraoperative bioprinting. A dual-functionalized tyramine and methacryloyl gelatin (GelMA-Tyr) is synthesized. Photo-crosslinking of both groups is triggered in a single photoexposure by cell-compatible visible light in presence of tris(2,2'-bipyridyl)dichlororuthenium(II) and sodium persulfate as initiators. Neo-cartilage formation from embedded chondroprogenitor cells is demonstrated in vitro, and the hydrogel is successfully applied as bioink for extrusion-printing. Visible light in situ crosslinking in cartilage defects results in no damage to the surrounding tissue, in contrast to the native chondrocyte death caused by UV light (365-400 nm range), commonly used in biofabrication. Tyramine-binding to proteins in native cartilage leads to a 15-fold increment in the adhesive strength of the bioglue compared to pristine GelMA. Enhanced adhesion is observed also when the ink is extruded as printable filaments into the defect. Visible-light reactive GelMA-Tyr bioinks can act as orthobiologic carriers for in situ cartilage repair, providing a permissive environment for chondrogenesis, and establishing safe lateral integration into chondral defects.

Single molecule protein stabilisation translates to macromolecular mechanics of a protein network

Folded globular proteins are attractive building blocks for biopolymer-based materials, as their mechanically resistant structures carry out diverse biological functionality. While much is now understood about the mechanical response of single folded proteins, a major challenge is to understand and predictably control how single protein mechanics translates to the collective response of a network of connected folded proteins. Here, by utilising the binding of maltose to hydrogels constructed from photo-chemically cross-linked maltose binding protein (MBP), we investigate the effects of protein stabilisation at the molecular level on the macroscopic mechanical and structural properties of a protein-based hydrogel. Rheological measurements show an enhancement in the mechanical strength and energy dissipation of MBP hydrogels in the presence of maltose. Circular dichroism spectroscopy and differential scanning calorimetry measurements show that MBP remains both folded and functional in situ. By coupling these mechanical measurements with mesoscopic structural information obtained by small angle scattering, we propose an occupation model in which higher proportions of stabilised, ligand occupied, protein building blocks translate their increased stability to the macroscopic properties of the hydrogel network. This provides powerful opportunities to exploit environmentally responsive folded protein-based biomaterials for many broad applications.

Horseradish Peroxidase-Catalyzed Crosslinking of Fibrin Microthread Scaffolds

Horseradish peroxidase (HRP) has been investigated as a catalyst to crosslink tissue-engineered hydrogels because of its mild reaction conditions and ability to modulate the mechanical properties of the matrix. Here, we report the results of the first study investigating the use of HRP to crosslink fibrin scaffolds. We examined the effect of varying HRP and hydrogen peroxide (H2O2) incorporation strategies on the resulting crosslink density and structural properties of fibrin in a microthread scaffold format. Primary (1°) and secondary (2°) scaffold modification techniques were evaluated to crosslink fibrin microthread scaffolds. A primary scaffold modification technique was defined as incorporating crosslinking agents into the microthread precursor solutions during extrusion. A secondary scaffold modification technique was defined as incubating the microthreads in a postprocessing crosslinker bath. Fibrin microthreads were enzymatically crosslinked through primary, secondary, or a combination of both approaches. All fibrin microthread scaffolds crosslinked with HRP and H2O2 via primary and/or secondary methods exhibited an increase in dityrosine crosslink density compared with uncrosslinked control microthreads, demonstrated by scaffold fluorescence. Fourier transform infrared spectroscopy indicated the formation of isodityrosine bonds in 1° HRP crosslinked microthreads. Characterization of tensile mechanical properties revealed that all HRP crosslinked microthreads were significantly stronger than control microthreads. Primary (1°) HRP crosslinked microthreads also demonstrated significantly slower degradation than control microthreads, suggesting that incorporating HRP and H2O2 during extrusion yields scaffolds with increased resistance to proteolytic degradation. Finally, cells seeded on HRP crosslinked microthreads retained a high degree of viability, demonstrating that HRP crosslinking yields biocompatible scaffolds that are suitable for tissue engineering. The goal of this work was to facilitate the logical design of enzymatically crosslinked fibrin microthreads with tunable structural properties, enabling their application for engineered tissue constructs with varied mechanical and structural properties.

Gelatin Hydrogels Reinforced by Absorbable Nanoparticles and Fibrils Cured In Situ by Visible Light for Tissue Adhesive Applications

Most gelatin hydrogels used in regenerative medicine applications today are fabricated by photocrosslinking due to the convenience and speed of this method. However, in most cases photoinitiators are used, which require UV light, which, in turn, can cause cell and tissue damage, or using functionalized gelatin. Recently, ruthenium (II) tris-bipyridyl chloride has been studied as an initiator that can induce dityrosine bond formation using visible light. In addition, continuous fibrils and small particles are often used to reinforce composite materials. Therefore, this study investigated the visible-light-induced photocrosslinking of native gelatin molecules via dityrosine bonds formation as well as gel reinforcement by collagen fibrils and mesoporous bioactive glass (MBG) particles. The results show that collagen and MBG exerted a synergistic effect on maintaining gel integrity with a dental LED curing light when the irradiation time was shortened to 30 s. Without the two reinforcing components, the gel could not form a geometric shape stable gel even when the exposure time was 120 s. The shear strength increased by 62% with the collagen and MBG compared with the blank control. Furthermore, our results demonstrate that the addition of collagen and MBG enhanced gel stability in an artificial saliva solution. These results demonstrate the considerable advantages of using tyrosine-containing biomolecules, and using a dental LED curing light for the crosslinking of hydrogels in terms of their suitability and feasibility for use as bioadhesives in confined clinical working space, such as the oral cavity, and in application as in situ-crosslinked injectable hydrogels.

Vat polymerization-based bioprinting-process, materials, applications and regulatory challenges

Over the years, the field of bioprinting has attracted attention for its highly automated fabrication system that enables the precise patterning of living cells and biomaterials at pre-defined positions for enhanced cell-matrix and cell-cell interactions. Notably, vat polymerization (VP)-based bioprinting is an emerging bioprinting technique for various tissue engineering applications due to its high fabrication accuracy. Particularly, different photo-initiators (PIs) are utilized during the bioprinting process to facilitate the crosslinking mechanism for fabrication of high-resolution complex tissue constructs. The advancements in VP-based printing have led to a paradigm shift in fabrication of tissue constructs from cell-seeding of tissue scaffolds (non-biocompatible fabrication process) to direct bioprinting of cell-laden tissue constructs (biocompatible fabrication process). This paper, presenting a first-time comprehensive review of the VP-based bioprinting process, provides an in-depth analysis and comparison of the various biocompatible PIs and highlights the important considerations and bioprinting requirements. This review paper reports a detailed analysis of its printing process and the influence of light-based curing modality and PIs on living cells. Lastly, this review also highlights the significance of VP-based bioprinting, the regulatory challenges and presents future directions to transform the VP-based printing technology into imperative tools in the field of tissue engineering and regenerative medicine. The readers will be informed on the current limitations and achievements of the VP-based bioprinting techniques. Notably, the readers will realize the importance and value of highly-automated platforms for tissue engineering applications and be able to develop objective viewpoints towards this field.

Rapid Photocrosslinking of Silk Hydrogels with High Cell Density and Enhanced Shape Fidelity

Silk fibroin hydrogels crosslinked through di-tyrosine bonds are clear, elastomeric constructs with immense potential in regenerative medicine applications. In this study, demonstrated is a new visible light-mediated photoredox system for di-tyrosine bond formation in silk fibroin that overcomes major limitations of current conventional enzymatic-based crosslinking. This photomediated system rapidly crosslinks silk fibroin (<1 min), allowing encapsulation of cells at significantly higher cell densities (15 million cells mL^-1 ) while retaining high cell viability (>80%). The photocrosslinked silk hydrogels present more stable mechanical properties which do not undergo spontaneous transition to stiff, β-sheet-rich networks typically seen for enzymatically crosslinked systems. These hydrogels also support long-term culture of human articular chondrocytes, with excellent cartilage tissue formation. This system also facilitates the first demonstration of biofabrication of silk fibroin constructs in the absence of chemical modification of the protein structure or rheological additives. Cell-laden constructs with complex, ordered, graduated architectures, and high resolution (40 µm) are fabricated using the photocrosslinking system, which cannot be achieved using the enzymatic crosslinking system. Taken together, this work demonstrates the immense potential of a new crosslinking approach for fabrication of elastomeric silk hydrogels with applications in biofabrication and tissue regeneration.

Advances in crosslinking strategies of biomedical hydrogels

Biomedical hydrogels as sole repair matrices or combined with pre-seeded cells and bioactive growth factors are extensively applied in tissue engineering and regenerative medicine. Hydrogels normally provide three dimensional structures for cell adhesion and proliferation or the controlled release of the loading of drugs or proteins. Various physiochemical properties of hydrogels endow them with distinct applications. In this review, we present the commonly used crosslinking method for hydrogel synthesis involving physical and chemical crosslinks and summarize their current progress and future perspectives.

Photocrosslinking of collagen using Ru(II)-polypyridyl complex functionalized gold nanoparticles

Collagen, an extracellular matrix protein, has been used for diverse biological applications due to its clinically safe in nature and for the development of various biomedical devices. As the ECM protein is prone to degradation process, it is necessary to stabilize the collagen. In the present study, we have carried out the stabilization of collagen using newly synthesized gold nanoparticles conjugated with Ru(II) complexes (NCs) possessing different ligand environment. From the DLS measurements, the size of the nanoparticles varies from 20 ± 6 nm. Fibrillation assay studies show that the NCs in the presence of photo-irradiation delays the fibrillation process significantly, while in the presence of persulfate, the acceleration in fibrillation process occurs. Circular dichroic and infra-red spectroscopic studies reveal that no alteration in triple helical structure observed for the photo-irradiated samples. SDS-PAGE analysis data reveal that the NCs facilitate the collagen crosslinks and hinders the enzymatic digestion, while neither Au-NPs nor Ru(II) complexes alone did not impart any stability to the collagen. The results from this study help us to understand the photochemical reaction of nanoparticle conjugate on collagen crosslinking and might be helpful in developing new photocatalyst for corneal application.

Selective stiffening of fibrin hydrogels with micron resolution via photocrosslinking

Fibrin hydrogels are used as a model system for studying cell-ECM biophysical interactions. Bulk mechanical stiffness of these hydrogels has been correlated to mechanotransduction and downstream signaling. However, stiffness values proximal to cells can vary by orders of magnitude at the length scale of microns. Patterning of matrix stiffness at this spatial scale can be useful in studying such interactions. Here we present and evaluate a technique to selectively stiffen defined regions within a fibrin hydrogel. Laser scanning illumination activates ruthenium-catalyzed crosslinking of fibrin tyrosine residues, resulting in tunable stiffness changes spanning distances as small as a few microns and a localized compaction of the material. As probed by active microrheology, stiffness increases by as much as 25X, similar to previously observed stiffness changes around single cells in 3D culture. In summary, our method allows for selective modification of fibrin stiffness at the micron scale with the potential to create complex patterns, which could be valuable for the investigation of mechanotransduction in a biologically meaningful way. STATEMENT OF SIGNIFICANCE: Fibrin hydrogels are used as a naturally derived model to study interactions between cells and their surrounding extracellular matrix (ECM). ECM stiffness influences cell state. Cells in 3D culture considerably modify the stiffness of their pericellular space, which can be quite heterogeneous at the micron-scale. Here we present and evaluate a method to pattern stiffness within fibrin hydrogels using a laser scanning confocal microscope and selective photo crosslinking. We believe that this technique can aid future studies of cell-ECM interactions by enabling researchers to modify the pericellular distribution of stiffness.

Matrix crosslinking enhances macrophage adhesion, migration, and inflammatory activation

Macrophages are versatile cells of the innate immune system that can adopt a variety of functional phenotypes depending on signals in their environment. In previous work, we found that culture of macrophages on fibrin, the provisional extracellular matrix protein, inhibits their inflammatory activation when compared to cells cultured on polystyrene surfaces. Here, we sought to investigate the role of matrix stiffness in the regulation of macrophage activity by manipulating the mechanical properties of fibrin. We utilize a photo-initiated crosslinking method to introduce dityrosine crosslinks to a fibrin gel and confirm an increase in gel stiffness through active microrheology. We observe that matrix crosslinking elicits distinct changes in macrophage morphology, integrin expression, migration, and inflammatory activation. Macrophages cultured on a stiffer substrate exhibit greater cell spreading and expression of αM integrin. Furthermore, macrophages cultured on crosslinked fibrin exhibit increased motility. Finally, culture of macrophages on photo-crosslinked fibrin enhances their inflammatory activation compared to unmodified fibrin, suggesting that matrix crosslinking regulates the functional activation of macrophages. These findings provide insight into how the physical properties of the extracellular matrix might control macrophage behavior during inflammation and wound healing.

Visible Light-Induced Hydrogelation of an Alginate Derivative and Application to Stereolithographic Bioprinting Using a Visible Light Projector and Acid Red

Visible light-induced hydrogelation is attractive for various biomedical applications. In this study, hydrogels of alginate with phenolic hydroxyl groups (Alg-Ph) were obtained by irradiating a solution containing the polymer, ruthenium II trisbipyridyl chloride ([Ru(bpy)₃]²⁺) and sodium persulfate (SPS), with visible light. The hydrogelation kinetics and the mechanical properties of the resultant hydrogels were tunable by controlling the intensity of the light and the concentrations of [Ru(bpy)₃]²⁺ and SPS. With appropriate concentrations of [Ru(bpy)₃]²⁺ and SPS, the hydrogel could be obtained following approximately 10 s of irradiation using a normal desktop lamp. The hydrogelation process and the resultant hydrogel were cytocompatible; mouse fibroblast cells enclosed in the Alg-Ph hydrogel maintained more than 90% viability for 1 week. The solution containing Alg-Ph, [Ru(bpy)₃]²⁺ and SPS was useful as a bioink for stereolithographic bioprinting. Cell-laden hydrogel constructs could be printed using the bioprinting system equipped with a visible light projector without a significant decrease in cell viability in the presence of photoabsorbent Acid Red 18. The hydrogel construct including a perfusable helical lumen of 1 mm in diameter could be fabricated using the printing system. These results demonstrate the significant potential of this visible light-induced hydrogelation system and the stereolithographic bioprinting using the hydrogelation system for tissue engineering and regenerative medicine.

Differentiation potential of human adipose stem cells bioprinted with hyaluronic acid/gelatin-based bioink through microextrusion and visible light-initiated crosslinking

Bioprinting has a great potential to fabricate three-dimensional (3D) functional tissues and organs. In particular, the technique enables fabrication of 3D constructs containing stem cells while maintaining cell proliferation and differentiation abilities, which is believed to be promising in the fields of tissue engineering and regenerative medicine. We aimed to demonstrate the utility of the bioprinting technique to create hydrogel constructs consisting of hyaluronic acid (HA) and gelatin derivatives through irradiation by visible light to fabricate 3D constructs containing human adipose stem cells (hADSCs). The hydrogel was obtained from a solution of HA and gelatin derivatives possessing phenolic hydroxyl moieties in the presence of ruthenium(II) tris-bipyridyl dication and sodium ammonium persulfate. hADSCs enclosed in the bioprinted hydrogel construct elongated and proliferated in the hydrogel. In addition, their differentiation potential was confirmed by examining the expression of pluripotency marker genes and cell surface marker proteins, and differentiation to adipocytes in adipogenic differentiation medium. Our results demonstrate the great potential of the bioprinting method and the resultant hADSC-laden HA/gelatin constructs for applications in tissue engineering and regenerative medicine.

Supramolecular β-Sheets Stabilized Protein Nanocarriers for Drug Delivery and Gene Transfection

Suckerin proteins, recently discovered in the sucker ring teeth of squids, represent a family of promising structural biomacromolecules that can form supramolecular networks stabilized by nanoconfined β-sheets. Exploiting this feature as well as their specific amino acid composition, we demonstrate that artificial suckerin-19 (S-19) can be engineered into nanocarriers for efficient drug delivery and gene transfection in vitro and in vivo. First, we demonstrate that S-19 self-assembles into β-sheet stabilized nanoparticles with controlled particle sizes of 100-200 nm that are able to encapsulate hydrophobic drugs for pH-dependent release in vitro, and that can effectively inhibit tumor growth in vivo. We also show that S-19 can complex and stabilize plasmid DNA, with the complexes stabilized by hydrophobic interactions of the β-sheet domains as opposed to electrostatic interactions commonly achieved with cationic polymers, thus lowering cytotoxicity. The elevated Histidine content of S-19 appears critical to trigger endosomal escape by the proton sponge effect, thereby ensuring efficient gene transfection both in vitro and in vivo. Our study demonstrates that S-19 represents a promising functional protein nanocarrier that could be used for various drug and gene delivery applications.

Squid Sucker Ring Teeth: Multiscale Structure-Property Relationships, Sequencing, and Protein Engineering of a Thermoplastic Biopolymer

The arms and tentacles of Decapodiform cephalopods (squids and cuttlefish) are lined with suckers, each of which contains embedded sucker ring teeth (SRT), which are used by the animal for prey capture and handling. SRT exhibit intriguing physicochemical and thermomechanical characteristics that have so far not been observed in other protein-based biomaterials. Notably, despite their comparatively high mechanical properties, SRT are almost fully soluble in chaotropic solvents and can be readily reconstituted after solvent evaporation into three-dimensional structures. SRT also exhibit thermoplastic characteristics: they can be melted and reshaped multiple times with no-or only minimal-loss of mechanical performance postprocessing. Intrigued by these unusual material characteristics, in recent years, we have conducted in-depth fundamental studies to unveil structure/property relationships of SRT from the molecular (genetic) level to the macroscopic scale. These investigations have demonstrated that SRT are entirely assembled from a protein family called "suckerins" that self-assemble into semicrystalline polymer infinite networks. Suckerins are block copolymers at the molecular level, whose closest analogy appears to be silk fibroins, although significant differences exist between these two protein families. Parallel to these studies, there have been efforts to mimic and engineer suckerins by protein engineering and to demonstrate potential applications through proof-of-concept studies, with a focus on the biomedical field. Both fundamental aspects and emerging applications are presented in this short review. Given the rather unusual source of this model structure, we start by a brief historical account of SRT and suckerin discovery.

Hydrogels Constructed from Engineered Proteins

Due to their various potential biomedical applications, hydrogels based on engineered proteins have attracted considerable interest. Benefitting from significant progress in recombinant DNA technology and protein engineering/design techniques, the field of protein hydrogels has made amazing progress. The latest progress of hydrogels constructed from engineered recombinant proteins are presented, mainly focused on biorecognition-driven physical hydrogels as well as chemically crosslinked hydrogels. The various bio-recognition based physical crosslinking strategies are discussed, as well as chemical crosslinking chemistries used to engineer protein hydrogels, and protein hydrogels' various biomedical applications. The future perspectives of this fast evolving field of biomaterials are also discussed.