Functional characterization of human coronary artery smooth muscle cells under cyclic mechanical strain in a degradable polyurethane scaffold

Development of tissue-engineered vascular grafts from decellularized parsley stems

Cardiovascular diseases are mostly associated with narrowing or blockage of blood vessels, and it is the most common cause of death worldwide. The use of vascular grafts is a promising approach to bypass or replace the blocked vessels for long-term treatment. Although autologous arteries or veins are the most preferred tissue sources for vascular bypass, the limited presence and poor quality of autologous vessels necessitate seeking alternative biomaterials. Recently, synthetic grafts have gained attention as an alternative to autologous grafts. However, the high failure rate of synthetic grafts has been reported primarily due to thrombosis, atherosclerosis, intimal hyperplasia, or infection. Thrombosis, the main reason for failure upon implantation, is associated with damage or absence of endothelial cell lining in the vascular graft's luminal surface. To overcome this, tissue-engineered vascular grafts (TEVGs) have come into prominence. Alongside the well-established scaffold manufacturing techniques, decellularized plant-based constructs have recently gained significant importance and are an emerging field in tissue engineering and regenerative medicine. Accordingly, in this study, we demonstrated the fabrication of tubular scaffolds from decellularized parsley stems and recellularized them with human endothelial cells to be used as a potential TEVG. Our results suggested that the native plant DNA was successfully removed, and soft tubular biomaterials were successfully manufactured via the chemical decellularization of the parsley stems. The decellularized parsley stems showed suitable mechanical and biological properties to be used as a TEVG material, and they provided a suitable environment for the culture of human endothelial cells to attach and create a pseudo endothelium prior to implantation. This study is the first one to demonstrate the potential of the parsley stems to be used as a potential TEVG biomaterial.

Modulation of Smooth Muscle Cell Phenotype for Translation of Tissue-Engineered Vascular Grafts

Translation of small-diameter tissue-engineered vascular grafts (TEVGs) for the treatment of coronary artery disease (CAD) remains an unfulfilled promise. This is largely due to the limited integration of TEVGs into the native vascular wall-a process hampered by the insufficient smooth muscle cell (SMC) infiltration and extracellular matrix deposition, and low vasoactivity. These processes can be promoted through the judicious modulation of the SMC toward a synthetic phenotype to promote remodeling and vascular integration; however, the expression of synthetic markers is often accompanied by a decrease in the expression of contractile proteins. Therefore, techniques that can precisely modulate the SMC phenotypical behavior could have the potential to advance the translation of TEVGs. In this review, we describe the phenotypic diversity of SMCs and the different environmental cues that allow the modulation of SMC gene expression. Furthermore, we describe the emerging biomaterial approaches to modulate the SMC phenotype in TEVG design and discuss the limitations of current techniques. In addition, we found that current studies in tissue engineering limit the analysis of the SMC phenotype to a few markers, which are often the characteristic of early differentiation only. This limited scope has reduced the potential of tissue engineering to modulate the SMC toward specific behaviors and applications. Therefore, we recommend using the techniques presented in this review, in addition to modern single-cell proteomics analysis techniques to comprehensively characterize the phenotypic modulation of SMCs. Expanding the holistic potential of SMC modulation presents a great opportunity to advance the translation of living conduits for CAD therapeutics.

Acellular Tissue-Engineered Vascular Grafts from Polymers: Methods, Achievements, Characterization, and Challenges

Extensive and permanent damage to the vasculature leading to different pathogenesis calls for developing innovative therapeutics, including drugs, medical devices, and cell therapies. Innovative strategies to engineer bioartificial/biomimetic vessels have been extensively exploited as an effective replacement for vessels that have seriously malfunctioned. However, further studies in polymer chemistry, additive manufacturing, and rapid prototyping are required to generate highly engineered vascular segments that can be effectively integrated into the existing vasculature of patients. One recently developed approach involves designing and fabricating acellular vessel equivalents from novel polymeric materials. This review aims to assess the design criteria, engineering factors, and innovative approaches for the fabrication and characterization of biomimetic macro- and micro-scale vessels. At the same time, the engineering correlation between the physical properties of the polymer and biological functionalities of multiscale acellular vascular segments are thoroughly elucidated. Moreover, several emerging characterization techniques for probing the mechanical properties of tissue-engineered vascular grafts are revealed. Finally, significant challenges to the clinical transformation of the highly promising engineered vessels derived from polymers are identified, and unique perspectives on future research directions are presented.

Tissue-engineered collagenous fibrous cap models to systematically elucidate atherosclerotic plaque rupture

A significant amount of vascular thrombotic events are associated with rupture of the fibrous cap that overlie atherosclerotic plaques. Cap rupture is however difficult to predict due to the heterogenous composition of the plaque, unknown material properties, and the stochastic nature of the event. Here, we aim to create tissue engineered human fibrous cap models with a variable but controllable collagen composition, suitable for mechanical testing, to scrutinize the reciprocal relationships between composition and mechanical properties. Myofibroblasts were cultured in 1 × 1.5 cm-sized fibrin-based constrained gels for 21 days according to established (dynamic) culture protocols (i.e. static, intermittent or continuous loading) to vary collagen composition (e.g. amount, type and organization). At day 7, a soft 2 mm ∅ fibrin inclusion was introduced in the centre of each tissue to mimic the soft lipid core, simulating the heterogeneity of a plaque. Results demonstrate reproducible collagenous tissues, that mimic the bulk mechanical properties of human caps and vary in collagen composition due to the presence of a successfully integrated soft inclusion and the culture protocol applied. The models can be deployed to assess tissue mechanics, evolution and failure of fibrous caps or complex heterogeneous tissues in general.

A critical review of fibrous polyurethane-based vascular tissue engineering scaffolds

Certain polymeric materials such as polyurethanes (PUs) are the most prevalent class of used biomaterials in regenerative medicine and have been widely explored as vascular substitutes in several animal models. It is thought that PU-based biomaterials possess suitable hemo-compatibility with comparable performance related to the normal blood vessels. Despite these advantages, the possibility of thrombus formation and restenosis limits their application as artificial functional vessels. In this regard, various surface modification approaches have been developed to enhance both hemo-compatibility and prolong patency. While critically reviewing the recent advances in vascular tissue engineering, mainly PU grafts, this paper summarizes the application of preferred cell sources to vascular regeneration, physicochemical properties, and some possible degradation mechanisms of PU to provide a more extensive perspective for future research.

Biofabrication of small diameter tissue-engineered vascular grafts

Current clinical treatment strategies for the bypassing of small diameter (<6 mm) blood vessels in the management of cardiovascular disease frequently fail due to a lack of suitable autologous grafts, as well as infection, thrombosis, and intimal hyperplasia associated with synthetic grafts. The rapid advancement of 3D printing and regenerative medicine technologies enabling the manufacture of biological, tissue-engineered vascular grafts (TEVGs) with the ability to integrate, remodel, and repair in vivo, promises a paradigm shift in cardiovascular disease management. This review comprehensively covers current state-of-the-art biofabrication technologies for the development of biomimetic TEVGs. Various scaffold based additive manufacturing methods used in vascular tissue engineering, including 3D printing, bioprinting, electrospinning and melt electrowriting, are discussed and assessed against the biomechanical and functional requirements of human vasculature, while the efficacy of decellularization protocols currently applied to engineered and native vessels are evaluated. Further, we provide interdisciplinary insight into the outlook of regenerative medicine for the development of vascular grafts, exploring key considerations and perspectives for the successful clinical integration of evolving technologies. It is expected that continued advancements in microscale additive manufacturing, biofabrication, tissue engineering and decellularization will culminate in the development of clinically viable, off-the-shelf TEVGs for small diameter applications in the near future. STATEMENT OF SIGNIFICANCE: Current clinical strategies for the management of cardiovascular disease using small diameter vessel bypassing procedures are inadequate, with up to 75% of synthetic grafts failing within 3 years of implantation. It is this critically important clinical problem that researchers in the field of vascular tissue engineering and regenerative medicine aim to alleviate using biofabrication methods combining additive manufacturing, biomaterials science and advanced cellular biology. While many approaches facilitate the development of bioengineered constructs which mimic the structure and function of native blood vessels, several challenges must still be overcome for clinical translation of the next generation of tissue-engineered vascular grafts.

Recent Advances in Polyurethane/POSS Hybrids for Biomedical Applications

Advanced organic-inorganic materials-composites, nanocomposites, and hybrids with various compositions offer unique properties required for biomedical applications. One of the most promising inorganic (nano)additives are polyhedral oligomeric silsesquioxanes (POSS); their biocompatibility, non-toxicity, and phase separation ability that modifies the material porosity are fundamental properties required in modern biomedical applications. When incorporated, chemically or physically, into polyurethane matrices, they substantially change polymer properties, including mechanical properties, surface characteristics, and bioactivity. Hence, this review is dedicated to POSS-PU composites that have recently been developed for applications in the biomedical field. First, different modes of POSS incorporation into PU structure have been presented, then recent developments of PU/POSS hybrids as bio-active composites for scaffolds, cardiovascular stents, valves, and membranes, as well as in bio-imaging and cancer treatment, have been described. Finally, characterization and methods of modification routes of polyurethane-based materials with silsesquioxanes were presented.

Self-Assembled Oligo-Urethane Nanoparticles: Their Characterization and Use for the Delivery of Active Biomolecules into Mammalian Cells

Developing safe and effective strategies to deliver biomolecules such as oligonucleotides and proteins into cells has grown in importance over recent years, with an increasing demand for non-viral methods that enable clinical translation. Here, we investigate uniquely configured oligo-urethane nanoparticles based on synthetic chemistries that minimize the release of pro-inflammatory biomarkers from immune cells, show low cytotoxicity in a broad range of cells, and efficiently deliver oligonucleotides and proteins into mammalian cells. The mechanism of cell uptake for the self-assembled oligo-urethane nanoparticles was shown to be directed by caveolae-dependent endocytosis in murine myoblasts (C₂C₁₂) cells. Inhibiting caveolae functions with genistein and methyl-β-cyclodextrin limited nanoparticle internalization. The nanoparticles showed a very high delivery efficiency for the genetic material (a 47-base oligonucleotide) (∼80% incorporation into cells) as well as the purified protein (full length firefly luciferase, 67 kDa) into human embryonic kidney (HEK293T) cells. Luciferase enzyme activity in HEK293T cells demonstrated that intact and functional proteins could be delivered and showed a significant extension of activity retention up to 24 h, well beyond the 2 h half-life of the free enzyme. This study introduces a novel self-assembled oligo-urethane nanoparticle delivery platform with very low associated production costs, enabled by their scalable chemistry (the benchwork cost is $ 0.152/mg vs $ 974.6/mg for typical lipid carriers) that has potential to deliver both oligonucleotides and proteins for biomedical purposes.

A modified 3D printer as a hybrid bioprinting-electrospinning system for use in vascular tissue engineering applications

There is a high demand for small diameter vascular grafts having mechanical and biological properties similar to that of living tissues. Tissue-engineered vascular grafts using current methods have often failed due to the mismatch of mechanical properties between the implanted graft and living tissues. To address this limitation, a hybrid bioprinting-electrospinning system is developed for vascular tissue engineering applications. The setup is capable of producing layered structure from electrospun fibres and cell-laden hydrogel. A Creality3D Ender 3D printer has been modified into a hybrid setup having one bioprinting head and two electrospinning heads. Fortus 250mc and Flashforge Creator Pro 3D printers were used to print parts using acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) polymers. An Arduino mega 2560 and a Ramps 1.4 controller board were selected to control the functions of the hybrid bioprinting setup. The setup was tested successfully to print a tubular construct around a rotating needle.

Harnessing Mechanobiology for Tissue Engineering

A primary challenge in tissue engineering is to recapitulate both the structural and functional features of whole tissues and organs. In vivo, patterning of the body plan and constituent tissues emerges from the carefully orchestrated interactions between the transcriptional programs that give rise to cell types and the mechanical forces that drive the bending, twisting, and extensions critical to morphogenesis. Substantial recent progress in mechanobiology-understanding how mechanics regulate cell behaviors and what cellular machineries are responsible-raises the possibility that one can begin to use these insights to help guide the strategy and design of functional engineered tissues. In this perspective, we review and propose the development of different approaches, from providing appropriate extracellular mechanical cues to interfering with cellular mechanosensing machinery, to aid in controlling cell and tissue structure and function.

Photo-functionalized TiO2 nanotubes decorated with multifunctional Ag nanoparticles for enhanced vascular biocompatibility

Titanium dioxide (TiO2) has a long history of application in blood contact materials, but it often suffers from insufficient anticoagulant properties. Recently, we have revealed the photocatalytic effect of TiO2 also induces anticoagulant properties. However, for long-term vascular implant devices such as vascular stents, besides anticoagulation, also anti-inflammatory, anti-hyperplastic properties, and the ability to support endothelial repair, are desired. To meet these requirements, here, we immobilized silver nanoparticles (AgNPs) on the surface of TiO2 nanotubes (TiO2-NTs) to obtain a composite material with enhanced photo-induced anticoagulant property and improvement of the other requested properties. The photo-functionalized TiO2-NTs showed protein-fouling resistance, causing the anticoagulant property and the ability to suppress cell adhesion. The immobilized AgNPs increased the photocatalytic activity of TiO2-NTs to enhances its photo-induced anticoagulant property. The AgNP density was optimized to endow the TiO2-NTs with anti-inflammatory property, a strong inhibitory effect on smooth muscle cells (SMCs), and low toxicity to endothelial cells (ECs). The in vivo test indicated that the photofunctionalized composite material achieved outstanding biocompatibility in vasculature via the synergy of photo-functionalized TiO2-NTs and the multifunctional AgNPs, and therefore has enormous potential in the field of cardiovascular implant devices. Our research could be a useful reference for further designing of multifunctional TiO2 materials with high vascular biocompatibility.

From arteries to capillaries: approaches to engineering human vasculature

From micro-scaled capillaries to millimeter-sized arteries and veins, human vasculature spans multiple scales and cell types. The convergence of bioengineering, materials science, and stem cell biology has enabled tissue engineers to recreate the structure and function of different hierarchical levels of the vascular tree. Engineering large-scale vessels has been pursued over the past thirty years to replace or bypass damaged arteries, arterioles, and venules, and their routine application in the clinic may become a reality in the near future. Strategies to engineer meso- and microvasculature have been extensively explored to generate models to study vascular biology, drug transport, and disease progression, as well as for vascularizing engineered tissues for regenerative medicine. However, bioengineering of large-scale tissues and whole organs for transplantation, have failed to result in clinical translation due to the lack of proper integrated vasculature for effective oxygen and nutrient delivery. The development of strategies to generate multi-scale vascular networks and their direct anastomosis to host vasculature would greatly benefit this formidable goal. In this review, we discuss design considerations and technologies for engineering millimeter-, meso-, and micro-scale vessels. We further provide examples of recent state-of-the-art strategies to engineer multi-scale vasculature. Finally, we identify key challenges limiting the translation of vascularized tissues and offer our perspective on future directions for exploration.

Proteome analysis of secretions from human monocyte-derived macrophages post-exposure to biomaterials and the effect of secretions on cardiac fibroblast fibrotic character

The use of exogenous biomolecules (BM) for the purpose of repairing and regenerating damaged cardiac tissue can yield serious side effects if used for prolonged periods. As well, such strategies can be cost prohibitive depending on the regiment and period of time applied. Alternatively, autologous monocytes/monocyte-derived macrophages (MDM) can provide a viable path towards generating an endogenous source of stimulatory BM. Biomaterials are often considered as delivery vehicles to generate unique profiles of such BM in tissues or to deliver autologous cells, that can influence the nature of BM produced by the cells. MDM cultured on a degradable polar hydrophobic ionic (D-PHI) polyurethane has previously demonstrated a propensity to increase select anti-inflammatory cytokines, and therefore there is good rationale to further investigate a broader spectrum of the cells' BM in order to provide a more complete proteomic analysis of human MDM secretions induced by D-PHI. Further, it is of interest to assess the potential of such BM to influence cells involved in the reparative state of vital tissues such as those that affect cardiac cell function. Hence, this current study examines the proteomic profile of MDM secretions using mass spectrometry for the first time, along with ELISA, following their culture on D-PHI, and compares them to two important reference materials, poly(lactic-co-glycolic acid) (PLGA) and tissue culture polystyrene (TCPS). Secretions collected from D-PHI cultured MDM led to higher levels of regenerative BM, AGRN, TGFBI and ANXA5, but lower levels of pro-fibrotic BM, MMP7, IL-1β, IL-6 and TNFα,  when compared to MDM secretions collected from PLGA and TCPS. In the application to cardiac cell function, the secretion collected from D-PHI cultured MDM led to more human cardiac fibroblast (HCFs) migration. A lower collagen gel contraction induced by MDM secretions collected from D-PHI was supported by gene array analysis for human fibrosis-related genes. The implication of these findings is that more tailored biomaterials such as D-PHI, may lead to a lower pro-inflammatory phenotype of macrophages when used in cardiac tissue constructs, thereby enabling the development of vehicles for the delivery of interventional therapies, or be applied as coatings for sensor implants in cardiac tissue that minimize fibrosis. The general approach of using synthetic biomaterials in order to induce MDM secretions in a manner that will guide favorable regeneration will be critical in making the choice of biomaterials for tissue regeneration work in the future. STATEMENT OF SIGNIFICANCE: Immune modulation strategies currently applied in cardiac tissue repair are mainly based on the delivery of defined exogenous biomolecules. However, the use of such biomolecules may pose wide ranging systemic effects, thereby rendering them clinically less practical. The chemistry of biomaterials (used as a potential targeted delivery modality to circumvent the broad systemic effects of biomolecules) can not only affect acute and chronic toxicity but also alters the timeframe of the wound healing cascade. In this context, monocytes/monocyte-derive macrophages (MDM) can be harnessed as an immune modulating strategy to promote wound healing by an appropriate choice of the biomaterial. However, there are limited reports on the complete proteome analysis of MDM and their reaction of biomaterial related interventions on cardiac tissues and cells. No studies to date have demonstrated the complete proteome of MDM secretions when these cells were cultured on a non-traditional immune modulatory ionomeric polyurethane D-PHI film. This study demonstrated that MDM cultured on D-PHI expressed significantly higher levels of AGRN, TGFBI and ANXA5 but lower levels of MMP7, IL-1β, IL-6 and TNFα when compared to MDM cultured on a well-established degradable biomaterials in the medical field, e.g. PLGA and TCPS, which are often used as the relative standards for cell culture work in the biomaterials field. The implications of these findings have relevance to the repair of cardiac tissues. In another aspect of the work, human cardiac fibroblasts showed significantly lower contractility (low collagen gel contraction and low levels of ACTA2) when cultured in the presence of MDM secretions collected after culturing them on D-PHI compared to PLGA and TCPS. The findings place emphasis on the importance of making the choice of biomaterials for tissue engineering and regenerative medicine applied to their use in cardiac tissue repair.

Bioresorbable Polymeric Scaffold in Cardiovascular Applications

Advances in material science and innovative medical technologies have allowed the development of less invasive interventional procedures for deploying implant devices, including scaffolds for cardiac tissue engineering. Biodegradable materials (e.g., resorbable polymers) are employed in devices that are only needed for a transient period. In the case of coronary stents, the device is only required for 6-8 months before positive remodelling takes place. Hence, biodegradable polymeric stents have been considered to promote this positive remodelling and eliminate the issue of permanent caging of the vessel. In tissue engineering, the role of the scaffold is to support favourable cell-scaffold interaction to stimulate formation of functional tissue. The ideal outcome is for the cells to produce their own extracellular matrix over time and eventually replace the implanted scaffold or tissue engineered construct. Synthetic biodegradable polymers are the favoured candidates as scaffolds, because their degradation rates can be manipulated over a broad time scale, and they may be functionalised easily. This review presents an overview of coronary heart disease, the limitations of current interventions and how biomaterials can be used to potentially circumvent these shortcomings in bioresorbable stents, vascular grafts and cardiac patches. The material specifications, type of polymers used, current progress and future challenges for each application will be discussed in this manuscript.

Human In Vitro Model Mimicking Material-Driven Vascular Regeneration Reveals How Cyclic Stretch and Shear Stress Differentially Modulate Inflammation and Matrix Deposition

Resorbable synthetic scaffolds designed to regenerate living tissues and organs inside the body have emerged as a clinically attractive technology to replace diseased blood vessels. However, mismatches between scaffold design and in vivo hemodynamic loading (i.e., cyclic stretch and shear stress) can result in aberrant inflammation and adverse tissue remodeling, leading to premature graft failure. Yet, the underlying mechanisms remain elusive. Here, a human in vitro model is presented that mimics the transient local inflammatory and biomechanical environments that drive scaffold-guided tissue regeneration. The model is based on the coculture of human (myo)fibroblasts and macrophages in a bioreactor platform that decouples cyclic stretch and shear stress. Using a resorbable supramolecular elastomer as the scaffold material, it is revealed that cyclic stretch initially reduces proinflammatory cytokine secretion and, especially when combined with shear stress, stimulates IL-10 secretion. Moreover, cyclic stretch stimulates downstream (myo)fibroblast proliferation and matrix deposition. In turn, shear stress attenuates cyclic-stretch-induced matrix growth by enhancing MMP-1/TIMP-1-mediated collagen remodeling, and synergistically alters (myo)fibroblast phenotype when combined with cyclic stretch. The findings suggest that shear stress acts as a stabilizing factor in cyclic stretch-induced tissue formation and highlight the distinct roles of hemodynamic loads in the design of resorbable vascular grafts.

Paracrine signalling from monocytes enables desirable extracellular matrix accumulation and temporally appropriate phenotype of vascular smooth muscle cell-like cells derived from adipose stromal cells

In vascular tissue engineering, the ability to obtain a robust and safe vascular tissue cell source (e.g. vascular smooth muscle cells (VSMCs)) and to promote vascular tissue-specific extracellular matrix (ECM) protein production is critically important. Mature blood vessel-derived VSMCs are not practical for in vitro vascular tissue regeneration. The authors have conceived a strategy to differentiate adipose derived stromal cells (ASCs) into VSMC-like cells (ASC-VSMCs) that were similar to mature umbilical artery VSMCs at the transcriptional, protein and contraction function levels. Monocytes/macrophages are known as important regulators of the inflammation and regeneration processes within different tissue types of the body. However, our understanding of the potential interactions between specific tissue-like cells differentiated from stem/stromal cells (e.g. ASC-VSMCs) and monocytes/macrophages (cued by specific biomaterial scaffolds) is still limited. In this study, indirect and direct ASC-VSMC-monocyte co-cultures were constructed within a porous polyurethane scaffold (D-PHI) previously shown to have an immunomodulatory character. The effects of monocytes/macrophages on the cellularity (cell number detected with DNA quantification assay), ECM (glycosaminoglycan (GAG), collagen, and elastin) accumulation as well as the maintenance of contractile VSMC markers (calponin and smoothelin) of the ASC-VSMCs after a month of co-culture were investigated. It was found that monocyte paracrine signalling in D-PHI positively affected the cellularity and ECM accumulation of ASC-VSMCs in co-culture. Cause-effect relationships were also identified between the release of pro-inflammatory/anti-inflammatory factors (i.e. IL6, TGF-β1) in co-culture and the expression of contractile proteins (calponin and smoothelin) by ASC-VSMCs. This study demonstrated the importance of combining an immune cell strategy with stromal cell derived VSMCs (i.e. ASC-VSMCs) to achieve a practical vascular tissue engineering outcome. STATEMENT OF SIGNIFICANCE: Adipose stromal cell derived-vascular smooth muscle cells (ASC-VSMCs) are a promising cell source for vascular tissue engineering. Monocytes/monocyte derived macrophages can be harnessed as an immune-assisted strategy to promote vascular tissue regeneration. This study demonstrated that the co-culture of human ASC-VSMCs with monocytes significantly enhanced the cellularity and extracellular matrix (ECM) accumulation within anionic polyurethane (D-PHI) scaffolds, partially mediated by monocyte paracrine signalling mechanisms. In addition, specific VSMC contractile markers (calponin and smoothelin) were still present in ASC-VSMCs when the cells were exposed to monocytes for a month in vitro. This study corroborated the potential selection of ASC-VSMCs for in vitro engineering of vascular tissue in an immunomodulatory biomaterial scaffold (e.g. D-PHI) based co-culture system containing monocytes.

Hybrid manufacturing strategies for tissue engineering scaffolds using methacrylate functionalised poly(glycerol sebacate)

Poly(glycerol sebacate) is an attractive biomaterial for tissue engineering due to its biocompatibility, elasticity and rapid degradation rate. However, poly(glycerol sebacate) requires harsh processing conditions, involving high temperatures and vacuum for extended periods, to produce an insoluble polymer matrix. These conditions make generating accurate and intricate geometries from poly(glycerol sebacate), such as those required for tissue engineering scaffolds, difficult. Functionalising poly(glycerol sebacate) with methacrylate groups produces a photocurable polymer, poly(glycerol sebacate)-methacrylate, which can be rapidly crosslinked into an insoluble matrix. Capitalising on these improved processing capabilities, here, we present a variety of approaches for fabricating porous tissue engineering scaffolds from poly(glycerol sebacate)-methacrylate using sucrose porogen leaching combined with other manufacturing methods. Mould-based techniques were used to produce porous disk-shaped and tubular scaffolds. Porogen size was shown to influence scaffold porosity and mechanical performance, and the porous poly(glycerol sebacate)-methacrylate scaffolds supported the proliferation of primary fibroblasts in vitro. Additionally, scaffolds with spatially variable mechanical properties were generated by combining variants of poly(glycerol sebacate)-methacrylate with different stiffness. Finally, subtractive and additive manufacturing methods were developed with the capabilities to generate porous poly(glycerol sebacate)-methacrylate scaffolds from digital designs. These hybrid manufacturing strategies offer the ability to produce accurate macroscale poly(glycerol sebacate)-methacrylate scaffolds with tailored microscale porosity and spatially resolved mechanical properties suitable for a broad range of applications across tissue engineering.

Comparative study of variations in mechanical stress and strain of human blood vessels: mechanical reference for vascular cell mechano-biology

The diseases of human blood vessels are closely associated with local mechanical variations. A better understanding of the quantitative correlation in mechanical environment between the current mechano-biological studies and vascular physiological or pathological conditions in vivo is crucial for evaluating numerous existing results and exploring new factors for disease discovery. In this study, six representative human blood vessels with known experimental measurements were selected, and their stress and strain variations in vessel walls under different blood pressures were analyzed based on nonlinear elastic theory. The results suggest that conventional mechano-biological experiments seeking the different biological expressions of cells at high/low mechanical loadings are ambiguous as references for studying vascular diseases, because distinct "site-specific" characteristics appear in different vessels. The present results demonstrate that the inner surface of the vessel wall does not always suffer the most severe stretch under high blood pressures comparing to the outer surface. Higher tension on the outer surface of aortas supports the hypothesis of the outside-in inflammation dominated by aortic adventitial fibroblasts. These results indicate that cellular studies at different mechanical niches should be "disease-specific" as well. The present results demonstrate considerable stress gradients across the wall thickness, which indicate micro-scale mechanical variations existing around the vascular cells, and imply that the physiological or pathological changes are not static processes confined within isolated regions, but are coupled with dynamic cell behaviors such as migration. The results suggest that the stress gradients, as well as the mechanical stresses and strains, are key factors constituting the mechanical niches, which may shed new light on "factor-specific" experiments of vascular cell mechano-biology.

Bioreactors Design, Types, Influencing Factors and Potential Application in Dentistry. A Literature Review

Objectives:

A variety of bioreactors and related approaches have been applied to dental tissues as their use has become more essential in the field of regenerative dentistry and dental tissue engineering. The review discusses the various types of bioreactors and their potential application in dentistry.

Methods:

Review of the literature was conducted using keywords (and MeSH) like Bioreactor, Regenerative Dentistry, Fourth Factor, Stem Cells, etc., from the journals published in English. All the searched abstracts, published in indexed journals were read and reviewed to further refine the list of included articles. Based on the relevance of abstracts pertaining to the manuscript, full-text articles were assessed.

Results:

Bioreactors provide a prerequisite platform to create, test, and validate the biomaterials and techniques proposed for dental tissue regeneration. Flow perfusion, rotational, spinner-flask, strain and customize-combined bioreactors have been applied for the regeneration of bone, periodontal ligament, gingiva, cementum, oral mucosa, temporomandibular joint and vascular tissues. Customized bioreactors can support cellular/biofilm growth as well as apply cyclic loading. Center of disease control & dip-flow biofilm-reactors and micro-bioreactor have been used to evaluate the biological properties of dental biomaterials, their performance assessment and interaction with biofilms. Few case reports have also applied the concept of in vivo bioreactor for the repair of musculoskeletal defects and used customdesigned bioreactor (Aastrom) to repair the defects of cleft-palate.

Conclusions:

Bioreactors provide a sterile simulated environment to support cellular differentiation for oro-dental regenerative applications. Also, bioreactors like, customized bioreactors for cyclic loading, biofilm reactors (CDC & drip-flow), and micro-bioreactor, can assess biological responses of dental biomaterials by simultaneously supporting cellular or biofilm growth and application of cyclic stresses.

Hyaluronic Acid Nanoparticle Composite Films Confer Favorable Time-Dependent Biofunctions for Vascular Wound Healing

Vascular stent implantation is the primary treatment for coronary artery disease. Surface modification of coronary stents is a topic of interest to prevent thrombosis and restenosis and to promote endothelization. However, bioactive coatings on implants have not yet been fully developed for the time-ordered biological requirements of vascular stents. The first month after vascular stent implantation, the pathological changes in the injured vascular tissue are complex and time-ordered. Therefore, vascular stents possess time-dependent biofunctions with early phase anticoagulant and anti-inflammatory properties. In the later stage, inhibitory effects on smooth muscle cell proliferation and the promotion of endothelial cell adhesion might meet the requirements of vascular repair. We fabricated three types of hyaluronic acid nanoparticles (HA-NPs) by subjecting HA and poly(ether imide) to ethyl(dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide coupling reaction. The HA-NPs prepared by HA with a molecular weight of 100 kDa showed the best stability in a hyaluronidase environment. HA-NP composite films (HA-NCFs) were then fabricated by coimmobilizing selected HA-NPs (100 kDa) and HA molecules (100 kDa) through amide reaction on PDA/HD coated 316 L stainless steel surfaces. The detachment behavior of HA-NPs (100 kDa) in PBS for 20 days indicated that the HA-NPs (100 kDa) gradually detached from the surface. In vitro tests (anticoagulant and anti-inflammatory tests, endothelial cells, and smooth muscle cells seeding, and bacterial adhesion test) indicated that the newly fabricated HA-NCFs have inhibitory effects on the adhesion of fibrinogen, platelets, macrophages, bacteria, SMCs, and ECs. As the HA-NPs detached from the surface, the HA-NCFs showed excellent gradual comprehensive biocompatibility, which promoted adhesion and proliferation of ECs while still exerting inhibitory effects on the platelets, macrophages, and SMCs. Finally, in vivo SS wire implantation test (aortic implantation in healthy Sprague-Dawley rats) showed that HA-NCFs possessed anti-inflammatory properties, inhibited the proliferation of smooth muscle cells, and promoted re-endothelialization. In particular, HA-NCFs with time-dependent biofunctions showed better antirestenosis effects than those of surfaces modified with molecular HA, which exhibited constant biocompatibility. This study provides an important basis for the construction of HA-NP composite films with favorable time-dependent biofunctions for the time-ordered biological requirements of vascular stent.

Current Strategies for the Manufacture of Small Size Tissue Engineering Vascular Grafts

Occlusive arterial disease, including coronary heart disease (CHD) and peripheral arterial disease (PAD), is the main cause of death, with an annual mortality incidence predicted to rise to 23.3 million worldwide by 2030. Current revascularization techniques consist of angioplasty, placement of a stent, or surgical bypass grafting. Autologous vessels, such as the saphenous vein and internal thoracic artery, represent the gold standard grafts for small-diameter vessels. However, they require invasive harvesting and are often unavailable. Synthetic vascular grafts represent an alternative to autologous vessels. These grafts have shown satisfactory long-term results for replacement of large- and medium-diameter arteries, such as the carotid or common femoral artery, but have poor patency rates when applied to small-diameter vessels, such as coronary arteries and arteries below the knee. Considering the limitations of current vascular bypass conduits, a tissue-engineered vascular graft (TEVG) with the ability to grow, remodel, and repair in vivo presents a potential solution for the future of vascular surgery. Here, we review the different methods that research groups have been investigating to create TEVGs in the last decades. We focus on the techniques employed in the manufacturing process of the grafts and categorize the approaches as scaffold-based (synthetic, natural, or hybrid) or self-assembled (cell-sheet, microtissue aggregation and bioprinting). Moreover, we highlight the attempts made so far to translate this new strategy from the bench to the bedside.

Surface modification and endothelialization of polyurethane for vascular tissue engineering applications: a review

Cardiovascular implants, especially vascular grafts made of synthetic polymers, find wide clinical applications in the treatment of cardiovascular diseases. However, cases of failure still exist, notably caused by restenosis and thrombus formation. Aiming to solve these problems, various approaches to surface modification of synthetic vascular grafts have been used to improve both the hemocompatibility and long-term patency of artificial vascular grafts. Surface modification using hydrophilic molecules can enhance hemocompatibility, but this may limit the initial vascular endothelial cell adhesion. Therefore, the improvement of endothelialization on these grafts with specific peptides and biomolecules is now an exciting field of research. In this review, several techniques to improve surface modification and endothelialization on vascular grafts, mainly polyurethane (PU) grafts, are summarized, together with the recent development and evolution of the different strategies: from the use of PEG, zwitterions, and polysaccharides to peptides and other biomolecules and genes; from in vitro endothelialization to in vivo endothelialization; and from bio-inert and bio-active to bio-mimetic approaches.

Controlling Molecular Weight of Hyaluronic Acid Conjugated on Amine-rich Surface: Toward Better Multifunctional Biomaterials for Cardiovascular Implants

The molecular weights (MWs) of hyaluronic acid (HA) in extracellular matrix secreted from both vascular endothelial cells (VECs) and vascular smooth muscle cells (VSMCs) play crucial roles in the cardiovascular physiology, as HA with appropriate MW influences important pathways of cardiovascular homeostasis, inhibits VSMC synthetic phenotype change and proliferation, inhibits platelet activation and aggregation, promotes endothelial monolayer repair and functionalization, and prevents inflammation and atherosclerosis. In this study, HA samples with gradients of MW (4 × 10³, 1 × 10⁵, and 5 × 10⁵ Da) were prepared by covalent conjugation to a copolymerized film of polydopamine and hexamethylendiamine (PDA/HD) as multifunctional coatings (PDA/HD-HA) with potential to improve the biocompatibility of cardiovascular biomaterials. The coatings immobilized with high-MW-HA (PDA/HD-HA-2: 1 × 10⁵ Da; PDA/HD-HA-3: 5 × 10⁵ Da) exhibited a remarkable suppression of platelet activation/aggregation and thrombosis under 15 dyn/cm² blood flow and simultaneously suppressed the adhesion and proliferation of VSMC and the adhesion, activation, and inflammatory cytokine release of macrophages. In particular, PDA/HD-HA-2 significantly enhanced VEC adhesion, proliferation, migration, and functional factors release, as well as the captured number of endothelial progenitor cells under dynamic condition. The in vivo results indicated that the multifunctional surface (PDA/HD-HA-2) created a favorable microenvironment of endothelial monolayer formation and functionalization for promoting reendothelialization and reducing restenosis of cardiovascular biomaterials.

Tissue engineered vascular grafts: current state of the field

INTRODUCTION

Conventional synthetic vascular grafts are limited by the inability to remodel, as well as issues of patency at smaller diameters. Tissue-engineered vascular grafts (TEVGs), constructed from biologically active cells and biodegradable scaffolds have the potential to overcome these limitations, and provide growth capacity and self-repair. Areas covered: This article outlines the TEVG design, biodegradable scaffolds, TEVG fabrication methods, cell seeding, drug delivery, strategies to reduce wait times, clinical trials, as well as a 5-year view with expert commentary. Expert commentary: TEVG technology has progressed significantly with advances in scaffold material and design, graft design, cell seeding and drug delivery. Strategies have been put in place to reduce wait times and improve 'off-the-shelf' capability of TEVGs. More recently, clinical trials have been conducted to investigate the clinical applications of TEVGs.

In situ foamable, degradable polyurethane as biomaterial for soft tissue repair

Degradable foams which can be inserted endoscopically as liquid or pasty mixtures into soft tissue defects possess a promising potential for the surgical treatment of such defects. The defects can be sealed under in situ foaming and simultaneous material expansion. We developed an in situ foamable (l-lactide-co-ε-caprolactone)-based, star-shaped prepolymer by ring opening polymerization of l-lactide and ε-caprolactone in the presence of meso-erythritol as starter. By conversion of the terminal hydroxyl groups of the formed oligoester with lysine diisocyanate ethyl ester (LDI) an isocyanate-endcapped, reactive prepolymer has been received. Foaming can be initiated by addition of 1,4-diazabicyclo[2,2,2]octane (DABCO), water, LDI and DMSO. By varying the composition of these additives, the foaming and curing time could be varied within a clinically acceptable range. A porosity of approximately 90%, and an average tensile strength of 0.3MPa with elongations of 90% were determined for the foams. In vitro cytotoxicity on cured foams was assayed on 3T3 fibroblasts and demonstrated an excellent cytocompatibility. This was also confirmed in an in vivo study using an established rat model, where prefabricated foams and in situ hardening material were inserted into subdermal skin incisions in parallel. The feature of chronic inflammation was only weakly developed in both groups and slightly more pronounced and persisted for longer time in the group of in situ foamed material. In both groups the foreign materials were vascularized, degraded and substituted by connective tissue. The results encourage to proceed with trials where the materials are used to fill more heavily loaded defects.

Review: bioreactor design towards generation of relevant engineered tissues: focus on clinical translation

In tissue engineering and regenerative medicine, studies that utilize 3D scaffolds for generating voluminous tissues are mostly confined in the realm of in vitro research and preclinical animal model testing. Bioreactors offer an excellent platform to grow and develop 3D tissues by providing conditions that mimic their native microenvironment. Aligning the bioreactor development process with a focus on patient care will aid in the faster translation of the bioreactor technology to clinics. In this review, we discuss the various factors involved in the design of clinically relevant bioreactors in relation to their respective applications. We explore the functional relevance of tissue grafts generated by bioreactors that have been designed to provide physiologically relevant mechanical cues on the growing tissue. The review discusses the recent trends in non-invasive sensing of the bioreactor culture conditions. It provides an insight to the current technological advancements that enable in situ, non-invasive, qualitative and quantitative evaluation of the tissue grafts grown in a bioreactor system. We summarize the emerging trends in commercial bioreactor design followed by a short discussion on the aspects that hamper the 'push' of bioreactor systems into the commercial market as well as 'pull' factors for stakeholders to embrace and adopt widespread utility of bioreactors in the clinical setting. Copyright © 2017 John Wiley & Sons, Ltd.

Strong multi-functions based on conjugating chondroitin sulfate onto an amine-rich surface will direct the vascular cell fate for cardiovascular implanted devices

This research may support potential applications for surface modification of cardiovascular implants to achieve improved multi-functions.

Scaffolds and Cell-Based Tissue Engineering for Blood Vessel Therapy

The increasing morbidity of cardiovascular diseases in modern society has made it crucial to develop a small-caliber blood vessel. In the absence of appropriate autologous vascular grafts, an alternative prosthesis must be constructed for cardiovascular disease patients. The aim of this article is to describe the advances in making cell-seeded cardiovascular prostheses. It also discusses the combinations of types of scaffolds and cells, especially autologous stem cells, which are suitable for application in tissue-engineered vessels with the favorable properties of mechanical strength, antithrombogenicity, biocompliance, anti-inflammation, fatigue resistance and long-term durability. This article highlights the advancements in cellular tissue-engineered vessels in recent years.

Unraveling the role of mechanical stimulation on smooth muscle cells: A comparative study between 2D and 3D models

A thorough understanding of cell response to combined culture configuration and mechanical cues is of paramount importance in vascular tissue engineering applications. Herein, we investigated and compared the response of vascular smooth muscle cells (vSMCs) cultured in different culture environments (2D cell monolayers and 3D cellularized collagen-based gels) in combination with mechanical stimulation (7% uniaxial cyclic strain, 1 Hz) for 2 and 5 days. When cyclic strain was applied, two different responses, in terms of cell orientation and expression of contractile-phenotype proteins, were observed in 2D and 3D models. Specifically, in 2D configuration, cyclic strain caused ∼50% of cell population to align nearly perpendicular (80-90 degrees) to the strain direction, while not influencing the contractile-phenotype protein expression, as compared to the 2D static controls. Conversely, the application of uniaxial strain to 3D constructs induced a ∼60% cell alignment almost parallel (0-10 degrees) to the strain direction. Moreover, 3D mechanical stimulation applied for 5 days induced a twofold increase of SM α-actin level and a 14-fold increase of calponin expression as compared to 3D static controls. Altogether these findings provide a new insight into the potential to drive cell behavior by modulating the extracellular matrix and the biomechanical environment. Biotechnol. Bioeng. 2016;113: 2254-2263. © 2016 Wiley Periodicals, Inc.

The Tissue-Engineered Vascular Graft-Past, Present, and Future

Cardiovascular disease is the leading cause of death worldwide, with this trend predicted to continue for the foreseeable future. Common disorders are associated with the stenosis or occlusion of blood vessels. The preferred treatment for the long-term revascularization of occluded vessels is surgery utilizing vascular grafts, such as coronary artery bypass grafting and peripheral artery bypass grafting. Currently, autologous vessels such as the saphenous vein and internal thoracic artery represent the gold standard grafts for small-diameter vessels (<6 mm), outperforming synthetic alternatives. However, these vessels are of limited availability, require invasive harvest, and are often unsuitable for use. To address this, the development of a tissue-engineered vascular graft (TEVG) has been rigorously pursued. This article reviews the current state of the art of TEVGs. The various approaches being explored to generate TEVGs are described, including scaffold-based methods (using synthetic and natural polymers), the use of decellularized natural matrices, and tissue self-assembly processes, with the results of various in vivo studies, including clinical trials, highlighted. A discussion of the key areas for further investigation, including graft cell source, mechanical properties, hemodynamics, integration, and assessment in animal models, is then presented.

Immunomodulatory polymeric scaffold enhances extracellular matrix production in cell co-cultures under dynamic mechanical stimulation

Despite the importance of immune cells in regulating the wound healing process following injury, there are few examples of synthetic biomaterials that have the capacity to push the body's immune cells toward pro-regeneration phenotypes, and fewer still that are designed with the intention of achieving this immunomodulatory character. While monocytes and their derived macrophages have been recognized as important contributors to tissue remodeling in vivo, this is primarily believed to be due to their ability to regulate other cell types. The ability of monocytes and macrophages to generate tissue products themselves, however, is currently not well appreciated within the field of tissue regeneration. Furthermore, while monocytes/macrophages are found in remodeling tissue that is subjected to mechanical loading, the effect this biomechanical strain on monocytes/macrophages and their ability to regulate tissue-specific cellular activity has not been understood due to the complexity of the many factors involved in the in vivo setting, hence necessitating the use of controlled in vitro culture platforms to investigate this phenomenon. In this study, human monocytes were co-cultured with human coronary artery smooth muscle cells (VSMCs) on a tubular (3mm ID) degradable polyurethane scaffold, with a unique combination of non-ionic polar, hydrophobic and ionic chemistry (D-PHI). The goal was to determine if such a synthetic matrix could be used in a co-culture system along with dynamic biomechanical stimulus (10% circumferential strain, 1Hz) conditions in order to direct monocytes to enhance tissue generation, and to better comprehend the different ways in which monocytes/macrophages may contribute to new tissue production. Mechanical strain and monocyte co-culture had a complementary and non-mitigating effect on VSMC growth. Co-culture samples demonstrated increased deposition of sulphated glycosaminoglycans (GAGs) and elastin, as well as increases in the release of FGF-2, a growth factor that can stimulate VSMC growth, while dynamic culture supported increases in collagen I and III as well as increased mechanical properties (elastic modulus, tensile strength) vs. static controls. Macrophage polarization toward an M1 state was not promoted by the biomaterial or culture conditions tested. Monocytes/macrophages cultured on D-PHI were also shown to produce vascular extracellular matrix components, including collagen I, collagen III, elastin, and GAGs. This study highlights the use of synthetic biomaterials having immunomodulatory character in order to promote cell and tissue growth when used in tissue engineering strategies, and identifies ECM deposition by monocytes/macrophages as an unexpected source of this new tissue.

STATEMENT OF SIGNIFICANCE

The ability of biomaterials to regulate macrophage activation towards a wound healing phenotype has recently been shown to support positive tissue regeneration. However, the ability of immunomodulatory biomaterials to harness monocyte/macrophage activity to support tissue engineering strategies in vitro holds enormous potential that has yet to be investigated. This study used a monocyte co-culture on a degradable polyurethane (D-PHI) to regulate the response of VSMCs in combination with biomechanical strain in a vascular tissue engineering context. Results demonstrate that immunomodulatory biomaterials, such as D-PHI, that support a desirable macrophage activation state can be combined with biomechanical strain to augment vascular tissue production in vitro, in part due to the novel and unexpected contribution of monocytes/macrophages themselves producing vascular ECM proteins.

Biomechanical strain induces elastin and collagen production in human pluripotent stem cell-derived vascular smooth muscle cells

Blood vessels are subjected to numerous biomechanical forces that work harmoniously but, when unbalanced because of vascular smooth muscle cell (vSMC) dysfunction, can trigger a wide range of ailments such as cerebrovascular, peripheral artery, and coronary artery diseases. Human pluripotent stem cells (hPSCs) serve as useful therapeutic tools that may help provide insight on the effect that such biomechanical stimuli have on vSMC function and differentiation. In this study, we aimed to examine the effect of biomechanical strain on vSMCs derived from hPSCs. The effects of two types of tensile strain on hPSC-vSMC derivatives at different stages of differentiation were examined. The derivatives included smooth muscle-like cells (SMLCs), mature SMLCs, and contractile vSMCs. All vSMC derivatives aligned perpendicularly to the direction of cyclic uniaxial strain. Serum deprivation and short-term uniaxial strain had a synergistic effect in enhancing collagen type I, fibronectin, and elastin gene expression. Furthermore, long-term uniaxial strain deterred collagen type III gene expression, whereas long-term circumferential strain upregulated both collagen type III and elastin gene expression. Finally, long-term uniaxial strain downregulated extracellular matrix (ECM) expression in more mature vSMC derivatives while upregulating elastin in less mature vSMC derivatives. Overall, our findings suggest that in vitro application of both cyclic uniaxial and circumferential tensile strain on hPSC-vSMC derivatives induces cell alignment and affects ECM gene expression. Therefore, mechanical stimulation of hPSC-vSMC derivatives using tensile strain may be important in modulating the phenotype and thus the function of vSMCs in tissue-engineered vessels.

Clinical applications of naturally derived biopolymer-based scaffolds for regenerative medicine

Naturally derived polymeric biomaterials, such as collagens, silks, elastins, alginates, and fibrins are utilized in tissue engineering due to their biocompatibility, bioactivity, and tunable mechanical and degradation kinetics. The use of these natural biopolymers in biomedical applications is advantageous because they do not release cytotoxic degradation products, are often processed using environmentally-friendly aqueous-based methods, and their degradation rates within biological systems can be manipulated by modifying the starting formulation or processing conditions. For these reasons, many recent in vivo investigations and FDA-approval of new biomaterials for clinical use have utilized natural biopolymers as matrices for cell delivery and as scaffolds for cell-free support of native tissues. This review highlights biopolymer-based scaffolds used in clinical applications for the regeneration and repair of native tissues, with a focus on bone, skeletal muscle, peripheral nerve, cardiac muscle, and cornea substitutes.

Syndecan-3 and TFPI colocalize on the surface of endothelial-, smooth muscle-, and cancer cells

Background

Tissue factor (TF) pathway inhibitor (TFPI) exists in two isoforms; TFPIα and TFPIβ. Both isoforms are cell surface attached mainly through glycosylphosphatidylinositol (GPI) anchors. TFPIα has also been proposed to bind other surface molecules, like glycosaminoglycans (GAGs). Cell surface TFPIβ has been shown to exert higher anticoagulant activity than TFPIα, suggesting alternative functions for TFPIα. Further characterization and search for novel TFPI binding partners is crucial to completely understand the biological functions of cell associated TFPI.

Methods and Results

Potential association of TFPI to heparan sulphate (HS) proteoglycans in the syndecan family were evaluated by knock down studies and flow cytometry analysis. Cell surface colocalization was assessed by confocal microscopy, and native PAGE or immunoprecipitation followed by Western blotting was used to test for protein interaction. Heparanase was used to enzymatically degrade cell surface HS GAGs. Anticoagulant potential was evaluated using a factor Xa (FXa) activity assay. Knock down of syndecan-3 in endothelial,- smooth muscle- and breast cancer cells reduced the TFPI surface levels by 20-50%, and an association of TFPIα to syndecan-3 on the cell surface was demonstrated. Western blotting indicated that TFPIα was found in complex with syndecan-3. The TFPI bound to syndecan-3 did not inhibit the FXa generation. Removal of HS GAGs did not release TFPI antigen from the cells.

Conclusions

We demonstrated an association between TFPIα and syndecan-3 in vascular cells and in cancer cells, which did not appear to depend on HS GAGs. No anticoagulant activity was detected for the TFPI associated with syndecan-3, which may indicate coagulation independent functions for this cell associated TFPI pool. This will, however, require further investigation.

Variation in Cardiac Pulse Frequencies Modulates vSMC Phenotype Switching During Vascular Remodeling

In vitro perfusion systems have exposed vascular constructs to mechanical conditions that emulate physiological pulse pressure and found significant improvements in graft development. However, current models maintain constant, or set pulse/shear mechanics that do not account for the natural temporal variation in frequency. With an aim to develop clinically relevant small diameter vascular grafts, these investigations detail a perfusion culture model that incorporates temporal pulse pressure variation. Our objective was to test the hypothesis that short-term variation in heart rate, such as changes in respiratory activity, plays a significant role in vascular remodeling and graft development. The pulse rate of a healthy volunteer was logged to model the effect of daily activities on heart rate. Vascular bioreactors were used to deliver perfusion conditions based on modeled frequencies of temporal pulse variability, termed Physiologically Modeled Pulse Dynamics (PMPD). Acellular scaffolds derived from the human umbilical vein were seeded with human vascular smooth muscle cells and perfused under defined pulsatile conditions. vSMC exposed to constant pulse frequencies expressed a contractile phenotype, while exposure to PMPD drove cells to a synthetic state with continued cell proliferation, increased tensile strength and stiffness as well as diminished vasoactivity. Results show the temporal variation associated with normal heart physiology to have a profound effect on vascular remodeling and vasoactive function. While these models are representative of vascular regeneration further investigation is required to understanding these and other key regulators in vSMC phenotype switching in non-pathological or wound healing states. This understanding has important clinical implications that may lead to improved treatments that enhance vessel regeneration.

Interaction of human smooth muscle cells with nanofibrous scaffolds: Effect of fiber orientation on cell adhesion, proliferation, and functional gene expression

Poly(ɛ-caprolactone) (PCL) and PCL-gelatin random and aligned nanofibers with diameters in the range of 200-400 nm were developed through electrospinning. Mechanical properties of aligned PCL and PCL-gelatin nanofibers were compared, and it was found that aligned PCL nanofibers showed significantly higher tensile strength and Young's modulus than the PCL-gelatin nanofiber system (p < 0.05). The in vitro degradation of aligned nanofibers showed that PCL-gelatin nanofibers degrade faster than aligned PCL nanofibers. Further, human smooth muscle cells were cultured on the random and aligned PCL-gelatin nanofibers and evaluated for adhesion, orientation, morphology, viability, proliferation and gene expression. Our results demonstrate that PCL-gelatin promotes higher cell adhesion and proliferation than the PCL nanofibers after 3, 7, and 10 days of culture. Aligned topography favored orientation of the cells along their directions and cell stretching was better in aligned nanofibers than the random nanofibers. The upregulation of α-actin, myosin heavy chain, collagen type I, and elastin genes demonstrate good cell-matrix interactions in both random and aligned scaffolds. Therefore, the present study concludes that aligned PCL-gelatin nanofibers could serve as potential scaffolding for culture of smooth muscle cells and may promote functional regeneration of tubular organs.

Promising perspectives towards regrowing a human arm

Despite the great enthusiasm about tissue engineering during the 1980s and the many significant basic observations made since then, the clinical application of tissue-engineered products has been limited. However, the prospect of creating new human tissues and organs is still exciting and continues to be a significant challenge for scientists and clinicians. A human arm is an extremely complicated biological construction. Considering regrowing a human arm requires asking about the current state-of-the-art of tissue engineering and the real capabilities that it may offer within a realistic time horizon. This work briefly addresses the state-of-the-art in the fields of cells and scaffolds that have high regenerative potential. Additional tools that are required to reconstruct more complex parts of the body, such as a human arm, seem achievable with the already available more sophisticated culture systems including three-dimensional organization, dynamic conditions and co-cultures. Finally, we present results on cell differentiation and cell and tissue maturation in culture when cells are exposed to mechanical forces. We postulate that in the foreseeable future even such complicated structures such as a human arm will be regrown in full in vitro under the conditions of a mechanically controlled co-culture system.

Uniaxial cyclic strain stimulates cell proliferation and secretion of interleukin-6 and vascular endothelial growth factor of human dermal fibroblasts seeded on chitosan scaffolds

Human dermal fibroblasts were inoculated into chitosan sponge scaffolds coated with type I collagen and it might be developed as a dermal substitute and/or dressing material. The application of 14% uniaxial cyclic strain to the cellular scaffolds affected the characteristics of the seeded human dermal fibroblasts. Cyclic strain enhanced cellular proliferation, the activity of metalloproteinase-2, and the expression of extracellular matrix proteins such as fibronectin. Moreover, cyclic strain increased the expression of vascular endothelial growth factor (VEGF) and interleukin (IL)-6, which are critical to wound healing. Even under static culture (strain, 0%) following 14% cyclic strain, the expression of VEGF and IL-6, which had increased under 14% strain, was amplified or maintained for at least 3 days. Uniaxial cyclic strain may enhance the wound-healing potential of human dermal fibroblasts seeded on chitosan scaffolds through the changes in the cellular characteristics of the fibroblasts when the cellular scaffold is transplanted into skin wounds, especially chronic wounds such as diabetic wounds.

Effects of pulsatile bioreactor culture on vascular smooth muscle cells seeded on electrospun poly (lactide-co-ε-caprolactone) scaffold

Electrospun nanofibrous scaffolds have several advantages, such as an extremely high surface-to-volume ratio, tunable porosity, and malleability to conform over a wide variety of sizes and shapes. However, there are limitations to culturing the cells on the scaffold, including the inability of the cells to infiltrate because of the scaffold's nano-sized pores. To overcome the limitations, we developed a controlled pulsatile bioreactor that produces static and dynamic flow, which improves transfer of such nutrients and oxygen, and a tubular-shaped vascular graft using cell matrix engineering. Electrospun scaffolds were seeded with smooth muscle cells (SMCs), cultured under dynamic or static conditions for 14 days, and analyzed. Mechanical examination revealed higher burst strength in the vascular grafts cultured under dynamic conditions than under static conditions. Also, immunohistology stain for alpa smooth muscle actin showed the difference of SMC distribution and existence on the scaffold between the static and dynamic culture conditions. The higher proliferation rate of SMCs in dynamic culture rather than static culture could be explained by the design of the bioreactor which mimics the physical environment such as media flow and pressure through the lumen of the construct. This supports regulation of collagen and leads to a significant increase in tensile strength of the engineered tissues. These results showed that the SMCs/electrospinning poly (lactide-co-ε-caprolactone) scaffold constructs formed tubular-shaped vascular grafts and could be useful in vascular tissue engineering.

Characterization and biocompatibility studies of new degradable poly(urea)urethanes prepared with arginine, glycine or aspartic acid as chain extenders

Polyurethanes are very often used in the cardiovascular field due to their tunable physicochemical properties and acceptable hemocompatibility although they suffer from poor endothelialization. With this in mind, we proposed the synthesis of a family of degradable segmented poly(urea)urethanes (SPUUs) using amino acids (L-arginine, glycine and L-aspartic acid) as chain extenders. These polymers degraded slowly in PBS (pH 7.4) after 24 weeks via a gradual decrease in molecular weight. In contrast, accelerated degradation showed higher mass loss under acidic, alkaline and oxidative media. MTT tests on polyurethanes with L-arginine as chain extenders showed no adverse effect on the metabolism of human umbilical vein endothelial cells (HUVECs) indicating the leachables did not provoke any toxic responses. In addition, SPUUs containing L-arginine promoted higher levels of HUVECs adhesion, spreading and viability after 7 days compared to the commonly used Tecoflex(®) polyurethane. The biodegradability and HUVEC proliferation on L-arginine-based SPUUs suggests that they can be used in the design of vascular grafts for tissue engineering.

Perfused culture of gingival fibroblasts in a degradable/polar/hydrophobic/ionic polyurethane (D-PHI) scaffold leads to enhanced proliferation and metabolic activity

Periodontal diseases cause the breakdown of the tooth-supporting gingival tissue. In treatments aimed at gingival tissue regeneration, tissue engineering is preferred over the common treatments such as scaling. Perfused (dynamic) culture has been shown to increase cell growth in tissue-engineered scaffolds. Since gingival tissues are highly vascularized, it was desired to investigate the influence of perfusion on the function of human gingival fibroblasts (HGF) when cultured in a degradable/polar/hydrophobic/ionic polyurethane scaffold during the early culture phase (4weeks) of engineering gingival tissues. It was observed that the growth of HGF was continuous over 28days in dynamic culture (3-fold increase, p<0.05), while it was reduced after 14days in static culture (i.e. no flow condition). Cell metabolic activity, as measured by a WST-1 assay, and total protein production show that HGF were in different metabolic states in the dynamic vs. static cultures. Observations from scanning electron microscopy and type I collagen (Col I) production measured by Western blotting suggest that medium perfusion significantly promoted collagen production in HGF after the first 4weeks of culture (p<0.05). The different proliferative and metabolic states for HGF in the perfused scaffolds suggest a different cell phenotype which may favour tissue regeneration.

Bioreactor design for tendon/ligament engineering

Tendon and ligament injury is a worldwide health problem, but the treatment options remain limited. Tendon and ligament engineering might provide an alternative tissue source for the surgical replacement of injured tendon. A bioreactor provides a controllable environment enabling the systematic study of specific biological, biochemical, and biomechanical requirements to design and manufacture engineered tendon/ligament tissue. Furthermore, the tendon/ligament bioreactor system can provide a suitable culture environment, which mimics the dynamics of the in vivo environment for tendon/ligament maturation. For clinical settings, bioreactors also have the advantages of less-contamination risk, high reproducibility of cell propagation by minimizing manual operation, and a consistent end product. In this review, we identify the key components, design preferences, and criteria that are required for the development of an ideal bioreactor for engineering tendons and ligaments.

Co-culturing monocytes with smooth muscle cells improves cell distribution within a degradable polyurethane scaffold and reduces inflammatory cytokines

Activated monocytes can promote inflammation or wound repair, depending on the nature of the implant environment. Recent work showed that a degradable, polar-hydrophobic-ionic polyurethane (D-PHI) induced an anti-inflammatory monocyte phenotype. In the current study it is hypothesized that wound-healing phenotype monocytes (activated by D-PHI material chemistry) will promote human vascular smooth muscle cells (hVSMC) to attach and migrate into porous D-PHI scaffolds. hVSMC migration is necessary for hVSMC population of the scaffold and tissue formation to occur, and then, once tissue formation is complete, the monocyte should promote contractile phenotype markers in the hVSMC. hVSMC were cultured for up to 28 days with or without monocytes and analyzed for cell viability, attachment (DNA) and migration. Lysates were analyzed for the hVSMC contractile phenotype markers calponin and α-smooth muscle actin (α-SMA) as well as urokinase plasminogen activator (uPA; pro-migration marker) using immunoblotting analysis. Histological staining showed that hVSMC alone remained around the perimeter of the scaffold, whereas co-culture samples had co-localization of monocytes with hVSMC in the pores, a more even cell distribution throughout the scaffold and increased total cell attachment (P<0.05). Co-culture samples had higher cell numbers and more DNA than the addition of both single cell cultures. The water-soluble tetrazolium-1 data suggested that cells were not dying over the 28 day culture period. Calponin, also linked to cell motility, was maintained up to 28 days in the co-culture and hVSMC alone, whereas α-SMA disappeared after 7 days. Co-cultures on D-PHI showed that monocytes were activated to a wound-healing phenotype (low TNF-α, elevated IL-10), while promoting uPA expression. In summary, this study showed that, by co-culturing monocytes with hVSMC, the latter showed increased total cell attachment and infiltration into the D-PHI scaffold compared with hVSMC alone, suggesting that monocytes may promote hVSMC migration, a condition necessary for ultimately achieving uniform tissue formation in porous scaffolds.

Rapid Self-Assembly of Tubular Arterial Media Layer from Smooth Muscle Cells in Transient Fibrin Gel

BACKGROUND: Tissue engineered blood vessels could address the large clinical need for small caliber vascular grafts. Self-assembly approaches that employ transient scaffolds to form tissues from only cells and secreted matrix could form completely autologous vascular grafts that rapidly remodel and integrate with host tissue in vivo. The objective of this study was to develop a simple and rapid method to self-assemble vascular cells into vascular grafts. HYPOTHESIS: We hypothesized that entrapment in rapidly degrading fibrin gels could facilitate self-assembly of vascular smooth muscle cells into a tubular tissue comprised mainly of SMCs and secreted matrix. METHODS: Baboon SMCs were entrapped in fibrin around a silicone tube and cultured for 14 days without fibrinolysis inhibitor. Spontaneous delamination from the inner tube allowed for simple isolation of constructs with forceps. RESULTS: Engineered tissues are tubular, handleable, and highly cellular, with substantial collagen deposition. Fibrin is largely degraded within 14 days. Tensile elastic modulus of ring segments is 36.2 kPa and 1.60 MPa for the toe and heel regions of the stress-strain relation, respectively. CONCLUSION: Fibrin entrapment without fibrinolysis inhibitor can facilitate rapid self-assembly of SMCs into tubular tissues. Future work will focus on mechanical conditioning and co-culture with vascular endothelial cells to improve mechanical strength and impart antithrombogenicity.