Fabrication of new single cell chip to monitor intracellular and extracellular redox state based on spectroelectrochemical method

Recent advances in the biosynthesis and industrial biotechnology of Gamma-amino butyric acid

GABA (Gamma-aminobutyric acid), a crucial neurotransmitter in the central nervous system, has gained significant attention in recent years due to its extensive benefits for human health. The review focused on recent advances in the biosynthesis and production of GABA. To begin with, the investigation evaluates GABA-producing strains and metabolic pathways, focusing on microbial sources such as Lactic Acid Bacteria, Escherichia coli, and Corynebacterium glutamicum. The metabolic pathways of GABA are elaborated upon, including the GABA shunt and critical enzymes involved in its synthesis. Next, strategies to enhance microbial GABA production are discussed, including optimization of fermentation factors, different fermentation methods such as co-culture strategy and two-step fermentation, and modification of the GABA metabolic pathway. The review also explores methods for determining glutamate (Glu) and GABA levels, emphasizing the importance of accurate quantification. Furthermore, a comprehensive market analysis and prospects are provided, highlighting current trends, potential applications, and challenges in the GABA industry. Overall, this review serves as a valuable resource for researchers and industrialists working on GABA advancements, focusing on its efficient synthesis processes and various applications, and providing novel ideas and approaches to improve GABA yield and quality.

Crater-like nanoelectrode arrays for electrochemical detection of dopamine release from neuronal cells

Stem cell therapy has shown great potential in treating various incurable diseases using conventional chemotherapy. Parkinson's disease (PD)-a neurodegenerative disease-has been reported to be caused by quantitative loss or abnormal functionality of dopaminergic neurons (DAnergic neurons). To date, stem cell therapies have shown some potential in treating PD throughex vivoengraftment of stem-cell-derived neurons. However, accurately identifying the differentiation and non-invasively evaluating the functionality and maturity of DAnergic neurons are formidable challenges in stem cell therapies. These strategies are important in enhancing the efficacy of stem cell therapies. In this study, we report a novel cell cultivation platform, that is, a nanocrater-like electrochemical nanoelectrode array (NCENA) for monitoring dopamine (DA) release from neurons to detect exocytotic DA release from DAnergic neurons. In particular, the developed NCENA has a nanostructure in which three-dimensional porous gold nanopillars are uniformly arranged on conductive electrodes. The developed NCENA exhibited great DA sensing capabilities with a linear range of 0.39-150μM and a limit of detection of 1.16μM. Furthermore, the nanotopographical cues provided by the NCENA are suitable for cell cultivation with enhanced cellular adhesion. Finally, we successfully analysed the functionality and maturity of differentiated neurons on the NCENA through its excellent sensing ability for exocytotic DA.

Electrochemical Sensing of Dopamine Using Polypyrrole/Molybdenum Oxide Bilayer-Modified ITO Electrode

The electrochemical sensing of biomarkers has attracted more and more attention due to the advantages of electrochemical biosensors, including their ease of use, excellent accuracy, and small analyte volumes. Thus, the electrochemical sensing of biomarkers has a potential application in early disease diagnosis diagnosis. Dopamine neurotransmitters have a vital role in the transmission of nerve impulses. Here, the fabrication of a polypyrrole/molybdenum dioxide nanoparticle (MoO3 NP)-modified ITO electrode based on a hydrothermal technique followed by electrochemical polymerization is reported. Several techniques were used to investigate the developed electrode's structure, morphology, and physical characteristics, including SEM, FTIR, EDX, N2 adsorption, and Raman spectroscopy. The results imply the formation of tiny MoO3 NPs with an average diameter of 29.01 nm. The developed electrode was used to determine low concentrations of dopamine neurotransmitters based on cyclic voltammetry and square wave voltammetry techniques. Furthermore, the developed electrode was used for monitoring dopamine in a human serum sample. The LOD for detecting dopamine by using MoO3 NPs/ITO electrodes based on the SWV technique was around 2.2 nmol L-1.

Spectroelectrochemical behavior of parallel arrays of single vertically oriented Pseudomonas aeruginosa cells

Pseudomonas aeruginosa is a Gram-negative opportunistic human pathogen responsible for a number of healthcare-associated infection. It is currently difficult to assess single cell behaviors of P. aeruginosa that might contribute to acquisition of antibiotic resistance, intercellular communication, biofilm development, or virulence, because mechanistic behavior is inferred from ensemble collections of cells, thus averaging effects over a population. Here, we develop and characterize a device that can capture and trap arrays of single P. aeruginosa cells in individual micropores in order to study their behaviors using spectroelectrochemistry. Focused ion beam milling is used to fabricate an array of micropores in a Au/dielectric/Au/SiO₂-containing multilayer substrate, in which individual micropores are formed with dimensions that facilitate the capture of single P. aeruginosa cells in a predominantly vertical orientation. The bottom Au ring is then used as a working electrode to explore the spectroelectrochemical behavior of parallel arrays of individual P. aeruginosa cells. Application of step-potential or swept-potential waveforms produces changes in the fluorescence emission that can be imaged and correlated with applied potential. Arrays of P. aeruginosa cells typically exhibit three characteristic fluorescence behaviors that are sensitive to nutritional stress and applied potential. The device developed here enables the study of parallel collections of single bacterial cells with well-defined orientational order and should facilitate efforts to elucidate methods of bacterial communication and multidrug resistance at the single cell level.

Spectroelectrochemical Enzyme Sensor System for Acetaldehyde Detection in Wine

A new spectroelectrochemical two-enzyme sensor system has been developed for the detection of acetaldehyde in wine. A combination of spectroscopy and electrochemistry improves the analytical features of the electrochemical sensor because the optical information collected with this system is only associated with acetaldehyde and avoids the interferents also present in wines as polyphenols. Spectroelectrochemical detection is achieved by the analysis of the optical properties of the K₃[Fe(CN)₆]/K₄[Fe(CN)₆] redox couple involved in the enzymatic process: aldehyde dehydrogenase catalyzes the aldehyde oxidation using β-nicotinamide adenine dinucleotide hydrate (NAD⁺) as a cofactor and, simultaneously, diaphorase reoxidizes the NADH formed in the first enzymatic process due to the presence of K₃[Fe(CN)₆]. An analysis of the characteristic UV-vis bands of K₃[Fe(CN)₆] at 310 and 420 nm allows the detection of acetaldehyde, since absorption bands are only related to the oxidation of this substrate, and avoids the contribution of other interferents.

Synthesis of gold nanoparticles@reduced porous graphene-modified ITO electrode for spectroelectrochemical detection of SARS-CoV-2 spike protein

Here, we reported the synthesis of reduced porous graphene oxide (rPGO) decorated with gold nanoparticles (Au NPs) to modify the ITO electrode. Then we used this highly uniform Au NPs@rPGO modified ITO electrode as a surface-enhanced Raman spectroscopy-active surface and a working electrode. The uses of the Au nanoparticles and porous graphene enhance the Raman signals and the electrochemical conductivity. COVID-19 protein-based biosensor was developed based on immobilization of anti-COVID-19 antibodies onto the modified electrode and its uses as a probe for capturing the COVID-19 protein. The developed biosensor showed the capability of monitoring the COVID-19 protein within a concentration range from 100 nmol/L to 1 pmol/L with a limit of detection (LOD) of 75 fmol/L. Furthermore, COVID-19 protein was detected based on electrochemical techniques within a concentration range from 100 nmol/L to 500 fmol/L that showed a LOD of 39.5 fmol/L. Finally, three concentrations of COVID-19 protein spiked in human serum were investigated. Thus, the present sensor showed high efficiency towards the detection of COVID-19.

Electrochemical Microbiosensor for Detecting COVID-19 in a Patient Sample Based on Gold Microcuboids Pattern

As continues increasing the COVID-19 infections, there is an urgent need for developing fast, simple, selective, and accurate COVID-19 biosensors. A highly uniform gold (Au) microcuboid pattern was used as a microelectrode that allowed monitoring a small analyte. The electrochemical biosensor was used to monitor the COVID-19 S protein within a concentration range from 100 to 5 pmol L⁻¹; it showed a lower detection limit of 276 fmol L⁻¹. Finally, the developed COVID-19 sensor was used to detect a positive sample from a human patient obtained through a nasal swab; the results were confirmed using the PCR technique. The results showed that the SWV technique showed high sensitivity towards detecting COVID-19 and good efficiency for detecting COVID-19 in a positive human sample.

Capillary-Mediated Single-Cell Dispenser

Single-cell manipulation, sorting, and dispensing into multiwell plates is useful for single-cell multiomics studies. Here, we develop a single-cell dispenser inspired by electrohydrodynamic jet printing that achieves accurate droplet generation and single-cell sorting and dispensing using fused silica capillary tubing as both the optical detection window and nozzle for droplet dispensing. Parameters that affect droplet dispensing performance-capillary inner and outer diameter, flow rate, applied voltage, and solution properties-were optimized systematically with COMSOL simulations and experimentation. Small (5-10 nL) droplets were obtained by using 100-μm inner diameter and 160-μm outer diameter capillary tubing and allowed efficient encapsulation and dispensing of single cells. We demonstrate an application of this easy-to-assemble single-cell dispenser by sorting and dispensing cells into multiwell plates for single-cell PCR analysis.

Electrochemical Cell Chips Based on Functionalized Nanometals

The electrochemical technique is one of the most accurate, rapid, and sensitive analytical assays, which becomes promising techniques for biological assays at a single-cell scale. Nanometals have been widely used for modification of the traditional electrodes to develop highly sensitive electrochemical cell chips. The electrochemical cell chips based on the nanostructured surface have been used as label-free, simple, and non-destructive techniques for in vitro monitoring of the effects of different anticancer drugs at the cellular level. Here, we will provide the recent progress in fabrication of nanopatterned surface and cell-based nanoarray, and discuss their applications based on electrochemical techniques such as detection of cellular states and chemicals, and non-destructive monitoring of stem cell differentiation.

Bioapplications of Nanomaterials

Nanobiotechnology is known as the application of nanoscaled techniques in biology which bridges natural science to living organism for improving the quality of life of humans. Nanotechnology was first issued in 1959 and has been rapidly developed, supplying numerous benefits to basic scientific academy and to clinical application including human healthcare, specifically in cancer therapy. This chapter discusses recent advances and potentials of nanotechnology in pharmaceutics, therapeutics, biosensing, bioimaging, and gene delivery that demonstrate the multifunctionality of nanotechnology.

Controlled fabrication of gold nanobipyramids/polypyrrole for shell-isolated nanoparticle-enhanced Raman spectroscopy to detect γ-aminobutyric acid

Shell-isolated nanoparticle-enhanced Raman Spectroscopy (SHINERS) has been a non-destructive, highly sensitive, specific and powerful sensing method. Detection of γ-aminobutyric acid (GABA) and glutamate, main neurotransmitters in the human brain, is important to diagnosis the neurological disorder. The purpose of this study is preparing a simple, rapid and inexpensive fabrication of Au nanobipyramids/polymer core/shell as a SHINERS-based biosensor to detect different neurotransmitters such as GABA and glutamate with high sensitivity and specificity. Au nanobipyramids/polymer core/shell was fabricated by using two steps process. In the first Au nanobipyramids with longitude and latitude axial of about 100 nm and 10 nm, respectively, was prepared based on the chemical reduction of Au ions by using sodium borohydride as a reducing agent. Then a thin layer of polypyrrole was used for decorating the Au nanobipyramids by using direct polymerization in the presence of Au nanobipyramids. The sensor composed Au nanobipyramids with a thin layer of polypyrrole that could measure GABA within a wide range of concentrations in the presence of human serum. And this sensor was used for direct monitoring of GABA and glutamate. The proposed biosensor can be applied to monitor the level of neurotransmitters accurately for the diagnosis of various neurological disorders with optical signal enhancement.

Metallic Nanoparticle-Based Optical Cell Chip for Nondestructive Monitoring of Intra/Extracellular Signals

The biosensing platform is noteworthy for high sensitivity and precise detection of target analytes, which are related to the status of cells or specific diseases. The modification of the transducers with metallic nanoparticles (MNPs) has attracted attention owing to excellent features such as improved sensitivity and selectivity. Moreover, the incorporation of MNPs into biosensing systems may increase the speed and the capability of the biosensors. In this review, we introduce the current progress of the developed cell-based biosensors, cell chip, based on the unique physiochemical features of MNPs. Mainly, we focus on optical intra/extracellular biosensing methods, including fluorescence, localized surface plasmon resonance (LSPR), and surface-enhanced Raman spectroscopy (SERS) based on the coupling of MNPs. We believe that the topics discussed here are useful and able to provide a guideline in the development of new MNP-based cell chip platforms for pharmaceutical applications such as drug screening and toxicological tests in the near future.

A Review on Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) has become a powerful tool in chemical, material and life sciences, owing to its intrinsic features (i.e., fingerprint recognition capabilities and high sensitivity) and to the technological advancements that have lowered the cost of the instruments and improved their sensitivity and user-friendliness. We provide an overview of the most significant aspects of SERS. First, the phenomena at the basis of the SERS amplification are described. Then, the measurement of the enhancement and the key factors that determine it (the materials, the hot spots, and the analyte-surface distance) are discussed. A section is dedicated to the analysis of the relevant factors for the choice of the excitation wavelength in a SERS experiment. Several types of substrates and fabrication methods are illustrated, along with some examples of the coupling of SERS with separation and capturing techniques. Finally, a representative selection of applications in the biomedical field, with direct and indirect protocols, is provided. We intentionally avoided using a highly technical language and, whenever possible, intuitive explanations of the involved phenomena are provided, in order to make this review suitable to scientists with different degrees of specialization in this field.

Application of Gold Nanoparticle to Plasmonic Biosensors

Gold nanoparticles (GNPs) have been widely utilized to develop various biosensors for molecular diagnosis, as they can be easily functionalized and exhibit unique optical properties explained by plasmonic effects. These unique optical properties of GNPs allow the expression of an intense color under light that can be tuned by altering their size, shape, composition, and coupling with other plasmonic nanoparticles. Additionally, they can also enhance other optical signals, such as fluorescence and Raman scattering, making them suitable for biosensor development. In this review, we provide a detailed discussion of the currently developed biosensors based on the aforementioned unique optical features of GNPs. Mainly, we focus on four different plasmonic biosensing methods, including localized surface plasmon resonance (LSPR), surface-enhanced Raman spectroscopy (SERS), fluorescence enhancement, and quenching caused by plasmon and colorimetry changes based on the coupling of GNPs. We believe that the topics discussed here are useful and able to provide a guideline in the development of novel GNP-based biosensors in the future.

Recent progress in surface-enhanced Raman spectroscopy for biological and biomedical applications: from cells to clinics

The application of surface-enhanced Raman spectroscopy (SERS) in biological and biomedical detection schemes is feasible due to its excellent molecular specificity and high sensitivity as well as the capability of SERS to be performed in complex biological compositions. SERS-based investigation of cells, which are the basic structure and functional unit of organisms, represents the starting point of this review. It is demonstrated that SERS provides a deep understanding of living cells as well as their microenvironment which is needed to assess the development of diseases. The clinical relevance of SERS is proved by its application for the detection of cancer cells and tumour margins under in vivo conditions and examples for theranostic approaches are discussed. This review article provides a comprehensive overview of the recent progress within the last 3 years.