Effects of vitamin E-diffused highly cross-linked UHMWPE particles on inflammation, apoptosis and immune response against S. aureus

Achieving Clearance of Drug-Resistant Bacterial Infection and Rapid Cutaneous Wound Regeneration Using an ROS-Balancing-Engineered Heterojunction

Intractable infected microenvironments caused by drug-resistant bacteria stalls the normal course of wound healing. Sono-piezodynamic therapy (SPT) is harnessed to combat pathogenic bacteria, but the superabundant reactive oxygen species (ROS) generated during SPT inevitably provoke severe inflammatory response, hindering tissue regeneration. Consequently, an intelligent nanocatalytic membrane composed of poly(lactic-co-glycolic acid) (PLGA) and black phosphorus /V2C MXene bio-heterojunctions (2D2-bioHJs) is devised. Under ultrasonication, 2D2-bioHJs effectively eliminate drug-resistant bacteria by disrupting metabolism and electron transport chain (ETC). When ultrasonication ceases, they enable the elimination of SPT-generated ROS. The 2D2-bioHJs act as a "lever" that effectively achieves a balance between ROS generation and annihilation, delivering both antibacterial and anti-inflammatory properties to the engineered membrane. More importantly, in vivo assays corroborate that the nanocatalytic membranes transform the stalled chronic wound environment into a regenerative one by eradicating the bacterial population, dampening the NF-κB inflammatory pathway and promoting angiogenesis. As envisaged, this work demonstrates a novel tactic to arm membranes with programmed antibacterial and anti-inflammatory effects to remedy refractory infected wounds from drug-fast bacteria.

Mechanism of regulating macrophages/osteoclasts in attenuating wear particle-induced aseptic osteolysis

Joint replacement surgery is the most effective treatment for end-stage arthritis. Aseptic loosening caused by periprosthetic osteolysis is a common complication after joint replacement. Inflammation induced by wear particles derived from prosthetic biomaterials is a major cause of osteolysis. We emphasize that bone marrow-derived macrophages and their fusion-derived osteoclasts play a key role in this pathological process. Researchers have developed multiple intervention approaches to regulate macrophage/osteoclast activation. Aiming at wear particle-induced periprosthetic aseptic osteolysis, this review separately discusses the molecular mechanism of regulation of ROS formation and inflammatory response through intervention of macrophage/osteoclast RANKL-MAPKs-NF-κB pathway. These molecular mechanisms regulate osteoclast activation in different ways, but they are not isolated from each other. There is also a lot of crosstalk among the different mechanisms. In addition, other bone and joint diseases related to osteoclast activation are also briefly introduced. Therefore, we discuss these new findings in the context of existing work with a view to developing new strategies for wear particle-associated osteolysis based on the regulation of macrophages/osteoclasts.

Macrophages-derived exosomes modulates wear particle-induced osteolysis via miR-3470b targeting TAB3/NF-κB signaling

Image 1.

Improving osteoinduction and osteogenesis of Ti6Al4V alloy porous scaffold by regulating the pore structure

Titanium alloy scaffolds with a porous structure have attracted much attention in bone defect repair. However, which pore structure is more beneficial to bone defect repair is controversial. In the present research, the Ti6Al4V alloy porous scaffolds with gradient pore sizes were designed and fabricated. The microstructure characterization, tests of mechanical properties, and in vitro and in vivo experiments have been performed to systematically evaluate the effect of pore size on osteoinduction and osteogenesis. The results revealed that the contact angle with water, compressive strength, and elastic modulus of the Ti6Al4V alloy porous scaffolds decreased gradually with the increase of pore size. However, there were obvious drops when the pore size of the porous scaffold was around 600 μm. As the pore size increased, the proliferation and integrin β1 of RAW 264.7 macrophages seeded on Ti6Al4V alloy porous scaffolds increased at first, reaching a maximum value at a pore size of around 600 μm, and then decreased subsequently. The proliferation, integrin β1, and osteogenic gene-related expressions of Bone marrow mesenchymal stem cells (BMSCs) seeded on Ti6Al4V alloy porous scaffolds with different pore sizes all exhibited similar variations which rose with increased pore size firstly, obtaining the maximum value at pore size about 600 μm, and then declined. The in vivo experiments confirmed the in vitro results, and the Ti6Al4V alloy porous scaffold with a pore size of 600 μm possessed the better capability to induce new bone formation. Therefore, for the design of Ti6Al4V alloy with a regular porous scaffold, the surface morphology, porosity, strength, and elastic modulus should be considered systematically, which would determine the capability of osteoinduction and osteogenesis.

Improved oxidation stability and crosslink density of chemically crosslinked ultrahigh molecular weight polyethylene using the antioxidant synergy for artificial joints

Vitamin E (VE) is currently an approved antioxidant to improve the oxidation stability of highly crosslinked ultrahigh molecular weight polyethylene (UHMWPE) insert used commercially in total joint arthroplasty. However, the decrease in crosslink density caused by VE reduces wear resistance of UHMWPE, showing an uncoordinated challenge. In this work, we hypothesized that D-sorbitol (DS) as a secondary antioxidant can improve the antioxidant efficacy of VE on chemically crosslinked UHMWPE. The combined effect of VE and DS on oxidation stability of UHMWPE was investigated at a set of controlled hybrid antioxidant content. The hybrid antioxidant strategy showed significantly synergistic enhancement on the oxidation stability of chemically crosslinked UHMWPE compared with the single VE strategy. More strikingly, the crosslink density of the blends with hybrid antioxidants stayed at a high level since DS is not sensitive to crosslinking. The relationships between oxidation stability, mechanical properties, crosslink density, and crystallinity were investigated, by which the clinically relevant overall performance of UHMWPE was optimized. This work provides a leading-edge design mean for the development of joint bearings.

Current Knowledge on Biomaterials for Orthopedic Applications Modified to Reduce Bacterial Adhesive Ability

A significant challenge in orthopedics is the design of biomaterial devices that are able to perform biological functions by substituting or repairing various tissues and controlling bone repair when required. This review presents an overview of the current state of our recent research into biomaterial modifications to reduce bacterial adhesive ability, compared with previous reviews and excellent research papers, but it is not intended to be exhaustive. In particular, we investigated biomaterials for replacement, such as metallic materials (titanium and titanium alloys) and polymers (ultra-high-molecular-weight polyethylene), and biomaterials for regeneration, such as poly(ε-caprolactone) and calcium phosphates as composites. Biomaterials have been designed, developed, and characterized to define surface/bulk features; they have also been subjected to bacterial adhesion assays to verify their potential capability to counteract infections. The addition of metal ions (e.g., silver), natural antimicrobial compounds (e.g., essential oils), or antioxidant agents (e.g., vitamin E) to different biomaterials conferred strong antibacterial properties and anti-adhesive features, improving their capability to counteract prosthetic joint infections and biofilm formation, which are important issues in orthopedic surgery. The complexity of biological materials is still far from being reached by materials science through the development of sophisticated biomaterials. However, close interdisciplinary work by materials scientists, engineers, microbiologists, chemists, physicists, and orthopedic surgeons is indeed necessary to modify the structures of biomaterials in order to achieve implant integration and tissue regeneration while avoiding microbial contamination.

Interactions between the foreign body reaction and Staphylococcus aureus biomaterial-associated infection. Winning strategies in the derby on biomaterial implant surfaces

Biomaterial-associated infections (BAIs) are an increasing problem where antibiotic therapies are often ineffective. The design of novel strategies to prevent or combat infection requires a better understanding of how an implanted foreign body prevents the immune system from eradicating surface-colonizing pathogens. The objective of this review is to chart factors resulting in sub-optimal clearance of Staphylococcus aureus bacteria involved in BAIs. To this end, we first describe three categories of bacterial mechanisms to counter the host immune system around foreign bodies: direct interaction with host cells, modulation of intercellular communication, and evasion of the immune system. These mechanisms take place in a time frame that differentiates sterile foreign body reactions, BAIs, and soft tissue infections. In addition, we identify experimental interventions in S. aureus BAI that may impact infectious mechanisms. Most experimental treatments modulate the host response to infection or alter the course of BAI through implant surface modulation. In conclusion, the first week after implantation and infection is crucial for the establishment of an S. aureus biofilm that resists the local immune reaction and antibiotic treatment. Although established and chronic S. aureus BAI is still treatable and manageable, the focus of interventions should lie on this first period.

Extracellular Vesicles from Human Urine-Derived Stem Cells Ameliorate Particulate Polyethylene-Induced Osteolysis

Purpose

Wear debris particle-induced periprosthetic osteolysis is a severe complication of total joint replacement that results in aseptic loosening and subsequent arthroplasty failure. No effective therapeutic agents or drugs have been approved to prevent or treat osteolysis; thus, revision surgery is often needed. Extracellular vesicles (EVs) are vital nanosized regulators of intercellular communication that can be directly applied to promote tissue repair and regeneration. In this study, we assessed the therapeutic potential of EVs from human urine-derived stem cells (USCs) (USC-EVs) in preventing ultrahigh-molecular-weight polyethylene (UHMWPE) particle-induced osteolysis.

Methods

USCs were characterized by measuring induced multipotent differentiation and flow cytometry. USC-EVs were isolated and characterized using transmission electron microscopy (TEM), dynamic light scattering (DLS) and Western blotting. RAW264.7 cells and bone marrow mesenchymal stem cells (BMSCs) were cultured with USC-EVs to verify osteoclast differentiation and osteoblast formation, respectively, in vitro. The effects of USC-EVs were investigated on a UHMWPE particle-induced murine calvarial osteolysis model by assessing bone mass, the inflammatory reaction, and osteoblast and osteoclast formation.

Results

USCs differentiated into osteogenic, adipogenic and chondrogenic cells in vitro and were positive for CD44, CD73, CD29 and CD90 but negative for CD34 and CD45. USC-EVs exhibited a cup-like morphology with a double-layered membrane structure and were positive for CD63 and TSG101 and negative for calnexin. In vitro, USC-EVs promoted the osteogenic differentiation of BMSCs and reduced proinflammatory factor production and osteoclastic activity in RAW264.7 cells. In vivo, local injection of USC-EVs around the central sites of the calvaria decreased inflammatory cytokine generation and osteolysis compared with the control groups and significantly increased bone formation.

Conclusion

Based on our findings, USC-EVs prevent UHMWPE particle-induced osteolysis by decreasing inflammation, suppressing bone resorption and promoting bone formation.

Synergy between vitamin E and D-sorbitol in enhancing oxidation stability of highly crosslinked ultrahigh molecular weight polyethylene

Oxidative stability of radiation crosslinked ultrahigh molecular weight polyethylene (UHMWPE) artificial joints is significantly improved by vitamin E (VE), but there is a dilemma that VE hinders crosslinking and thus jeopardizes the wear of UHMWPE. In this effort, we proposed an efficient strategy to stabilize UHMWPE under limited antioxidant contents, where VE and D-sorbitol (DS) were used as the primary antioxidant and the secondary antioxidant respectively. For non-irradiated blends with fixed antioxidant contents, oxidative stability accessed by oxidation induction time (OIT) of VE/DS/UHMWPE blends was superior to that of VE/UHMWPE blends, while DS/UHMWPE blends showed no increase in OIT. The cooperation between DS and VE exhibited a synergistic effect on enhancing the oxidative stability of UHMWPE. Interestingly, the irradiated VE/DS/UHMWPE blends showed comparable OIT but a significantly higher crosslink density than the irradiated VE/UHMWPE blends. The crystallinity, melting point, and in vitro biocompatibility of the blends were not affected by VE and DS. The quantitative relationships of mechanical properties, oxidation stability, crystallinity and crosslink density were established to unveil the correlation of these key factors. The overall properties of VE/UHMWPE and VE/DS/UHMWPE blends were compared to elucidate the superiority of the antioxidant compounding strategy. These findings provide a paradigm to break the trade-off between oxidative stability, crosslink density and mechanical properties, which is constructive to develop UHMWPE bearings with upgraded performance for total joint replacements. STATEMENT OF SIGNIFICANCE: VE-stabilized UHMWPE is the most commonly used material in total joint replacements at present. However, oxidation and wear resistance of VE/UHMWPE implants cannot be unified since VE reduces the efficiency of radiation crosslinking. It limits the use of VE. Herein, we proposed a compounding stabilization by the synergy between VE and DS. The antioxidation capability of VE was revived by DS, thus enhancing the oxidation stability of unirradiated UHMWPE. The irradiated VE/DS/UHMWPE exhibited similar oxidation stability but higher crosslink density than irradiated VE/UHMWPE, which is beneficial to combat wear of UHMWPE and to inhibit the occurrence of osteolysis. This synergistic antioxidation strategy endows the UHMWPE joint material with good overall performance, which is of clinical significance.

Aseptic and septic prosthetic joint loosening: Impact of biomaterial wear on immune cell function, inflammation, and infection

The success of total joint replacements has led to consistent growth in the use of arthroplasty in progressively younger patients. However, more than 10 percent of patients require revision surgeries due to implant failure caused by osteolytic loosening. These failures are classified as either aseptic or septic and are associated with the presence of particulate wear debris generated by mechanical action between implant components. Aseptic loosening results from chronic inflammation caused by activation of resident immune cells in contact with implant wear debris. In contrast, septic loosening is defined by the presence of chronic infection at the implant site. However, recent findings suggest that subclinical biofilms may be overlooked when evaluating the cause of implant failure, leading to a misdiagnosis of aseptic loosening. Many of the inflammatory pathways contributing to periprosthetic joint infections are also involved in bone remodeling and resorption. In particular, wear debris is increasingly implicated in the inhibition of the innate and adaptive immune response to resolve an infection or prevent hematogenous spread. This review examines the interconnectivity of wear particle- and infection-associated mechanisms of implant loosening, as well as biomaterials-based strategies to combat infection-related osteolysis.

Femoral head penetration in Vitamin-E polyethylene liner versus conventional liners in total hip arthroplasty: systematic review and meta-analysis of randomised control trials

BACKGROUND

Debate encompasses the use of Vitamin E Polyethylene or conventional Polyethylene liner in primary hip arthroplasty. Does the Inclusion of Vitamin E in PE give adequate protection from oxidation and maintains lower rates of wear?

PATIENTS AND METHODS

We performed this study following the Preferred Reporting Items for Systematic Reviews and Meta-analyses Statement (PRISMA) and the Cochrane Handbook for systematic reviews and meta-analysis. Studies were included from any region, written in any language. We had only the randomised control trials comparing the femoral head penetration between Vitamin-E diffused highly cross-linked polyethylene (VEPE) liner and conventional liners in primary total hip arthroplasty.

RESULTS

We included 10 studies in this meta-analysis. We conducted them using Review Manager V.5.0. We computed the risk ratio to measure the treatment effect, considering the heterogeneity. We used Random-effect models. VEPE had insignificant marginal advantages for FHP within three months post-operative. Additionally, VEPE showed significantly less FHP after two and five years. After one year, it showed significantly less FHP with the VEPE group versus the UHMWPE cohort and a non-significant difference between the VEPE and XLPE group.

CONCLUSIONS

In terms of FHP, this metanalysis shows less FHP for the VEPE than conventional PE. A longer follow-up period is required to evaluate whether the oxidation protection gained by Vitamin E results in lower wear rates, less osteolysis, and aseptic loosening compared to the conventional PE in the long term.

Toward a Better Regeneration through Implant-Mediated Immunomodulation: Harnessing the Immune Responses

Tissue repair/regeneration, after implantation or injury, involves comprehensive physiological processes wherein immune responses play a crucial role to enable tissue restoration, amidst the immune cells early-stage response to tissue damages. These cells break down extracellular matrix, clear debris, and secret cytokines to orchestrate regeneration. However, the immune response can also lead to abnormal tissue healing or scar formation if not well directed. This review first introduces the general immune response post injury, with focus on the major immune cells including neutrophils, macrophages, and T cells. Next, a variety of implant-mediated immunomodulation strategies to regulate immune response through physical, chemical, and biological cues are discussed. At last, various scaffold-facilitated regenerations of different tissue types, such as, bone, cartilage, blood vessel, and nerve system, by harnessing the immunomodulation are presented. Therefore, the most recent data in biomaterials and immunomodulation is presented here in a bid to shape expert perspectives, inspire researchers to go in new directions, and drive development of future strategies focusing on targeted, sequential, and dynamic immunomodulation elicited by implants.

Interleukin-4 protects mice against lethal influenza and Streptococcus pneumoniae co-infected pneumonia

Streptococcus pneumoniae co-infection post-influenza is a major cause of mortality characterized by uncontrolled bacteria burden and excessive immune response during influenza pandemics. Interleukin (IL)-4 is a canonical type II immune cytokine known for its wide range of biological activities on different cell types. It displays protective roles in numerous infectious diseases and immune-related diseases, but its role in influenza and S. pneumoniae (influenza/S. pneumoniae) co-infected pneumonia has not been reported. In our study, we used C57BL/6 wild-type (WT) and IL-4-deficient (IL-4^-/- ) mice to establish co-infection model with S. pneumoniae after influenza virus infection. Co-infected IL-4^-/- mice showed increased mortality and weight loss compared with WT mice. IL-4 deficiency led to increased bacterial loads in lungs without altering influenza virus replication, suggesting a role of IL-4 in decreasing post-influenza susceptibility to S. pneumoniae co-infection. Loss of IL-4 also resulted in aggravated lung damage together with massive proinflammatory cytokine production and immune cell infiltration during co-infection. Administration of recombinant IL-4 rescued the survival and weight loss of IL-4^-/- mice in lethal co-infection. Additionally, IL-4 deficiency led to more immune cell death in co-infection. Gasdermin D (GSDMD) during co-infection was induced in IL-4^-/- mice that subsequently activated cell pyroptosis. Treatment of recombinant IL-4 or inhibition of GSDMD activity by disulfiram decreased immune cell death and bacterial loads in lungs of IL-4^-/- co-infected mice. These results suggest that IL-4 decreases post-influenza susceptibility to S. pneumoniae co-infection via suppressing GSDMD-induced pyroptosis. Collectively, this study demonstrates the protective role of IL-4 in influenza/S. pneumoniae co-infected pneumonia.

The effect of strontium ranelate on titanium particle-induced periprosthetic osteolysis regulated by WNT/β-catenin signaling in vivo and in vitro

Aseptic loosening following periprosthetic osteolysis is the primary complication that limits the lifetime of total joint arthroplasty (TJA). The wear particles trigger a chronic inflammation response in the periprosthetic tissue and turn over the bone balance to bone resorption. The present study aimed to investigate the possible effect and mechanism of strontium ranelate (SR), a clinically safe drug for osteoporosis, on particle-induced periprosthetic osteolysis. Thirty-six female C57BL/6j mice underwent tibial Ti-nail implantation to establish an animal model of aseptic loosening. After 12 weeks, micro-CT results showed that strontium ranelate could inhibit periprosthetic bone resorption. In vitro, Ti particles were used to stimulate RAW264.7 cell line to collect conditioned medium, and co-culture MC3T3-E1 cell line with conditioned medium to establish a cell model of aseptic loosening. The results of alkaline phosphatase (ALP) detection, immunofluorescence, and flow cytometry demonstrated that strontium ranelate could regulate the expression of OPG/RANKL, promote differentiation and mineralization, and inhibit apoptosis in osteoblasts. Moreover, we revealed that SR's exerted its therapeutic effect by down-regulating sclerostin, thereby activating the Wnt/β-catenin signal pathway. Therefore, this research suggests that strontium ranelate could be a potential drug for the prevention and treatment of particle-induced aseptic loosening post-TJA.

Plastics in Total Knee Replacement: Processing to Performance

Polyethylene (PE) is the key component of total knee replacement (TKR). The wear of polyethylene, a common cause of revision surgeries, depends on multiple factors. The mechanical properties, wear characteristics, and oxidative resistance of PE can be manipulated by the techniques of processing, sterilization, and packaging methods. This article describes the making of conventional and cross-linked poly, packaging, sterilization, processing techniques, and a summary of commercially available plastics and their rationale in TKR including the latest advances.

Evaluating the bio-application of biomacromolecule of lignin-carbohydrate complexes (LCC) from wheat straw in bone metabolism via ROS scavenging

Lignin-carbohydrate complexes (LCC) arebiomacromolecules that can be obtained from different biomass. Even some works have shown the LCC can efficiently scavenge the intracellular and endogenous reactive oxygen species (ROS), while little work has been carried out to investigate the potential application of LCC for ROS-related treatment in biological filed, especially for the treatment of periprosthetic osteolysis in vivo. In this work, Lignin-rich (LCC-A) and carbohydrate-rich (LCC-B) fractions in wheat straw are isolated and used as the ROS scavenger to promote osteoblast differentiation and inhibit osteoclast differentiation. The chemical composition and structures are characterized by high performance anion exchange chromatography (HPAEC) and nuclear magnetic resonance (NMR) technologies (quantitative ¹³C NMR and 2D-HSQC NMR), respectively. The results showed LCC-A possesses higher in vitro ROS-scavenging ability than LCC-B (89.8% vs 57.8%) and to inhibit osteoclast differentiation, whereas LCC-B more significantly activates cellular antioxidant activities via the KEAP1-NRF2-ARE pathway (218.5% vs 438.0% in the level of HO-1), thus promoting osteoblast differentiation in an inflammatory environment. Moreover, the therapeutic administration of LCC-A and LCC-B for Ti-particle-induced osteolytic murine calvariae showed both of them positively regulate and restore the bone metabolism, while preventing calvaria impairment. Hence, LCC from wheat straw exhibits efficient bone protective effects, suggesting it may be used as the promising ROS scavenger for clinical treatment of periprosthetic osteolysis.

Antibacterial and anti-inflammatory ultrahigh molecular weight polyethylene/tea polyphenol blends for artificial joint applications

Periprosthetic joint infection (PJI) is one of the main causes for the failure of joint arthroplasty. In view of the limited clinical effect of oral/injectable antibiotics and the drug resistance problem, there is a pressing need to develop antibacterial implants with therapeutic antimicrobial properties. In this work, we prepared a highly antibacterial ultrahigh molecular weight polyethylene (UHMWPE) implant by incorporating tea polyphenols. The presence of tea polyphenols not only improved the oxidation stability of irradiated UHMWPE, but also gave it the desirable antibacterial property. The potent antibacterial activity was attributed to the tea polyphenols that produced excess intracellular reactive oxygen species and destroyed the bacterial membrane structure. The tea polyphenol-blended UHMWPE had no biological toxicity to human adipose-derived stem cells and effectively reduced bacteria-induced inflammation in vivo. These results indicate that tea polyphenol-blended UHMWPE is promising for joint replacement prostheses with multifunctionality to meet patient satisfaction.

Titanium particles induce apoptosis by promoting autophagy in macrophages via the PI3K/Akt signaling pathway

Chronic inflammation and infection in the tissue surrounding implants after total joint replacement is closely associated with the innate immune response to surgical implants. Wear particles are known to increase apoptosis and impair the innate immunity in macrophages, which can cause immunosuppression around the implants. Excessive autophagy can induce apoptosis. However, the link between autophagy and apoptosis in macrophages during chronic inflammation and infection remains unknown. In this study, we investigated the autophagy and apoptosis induced by titanium particles in RAW264.7 macrophages, and in the interface membrane of patients with late-onset periprosthetic joint infection (PJI). We found that titanium particles stimulated autophagy and apoptosis in macrophages. Inhibition of autophagy significantly reduced titanium particle-induced apoptosis in macrophages, which may be related to the PI3K/Akt signaling pathway. The secretion of inflammatory factors, such as IL-1β, IL-6, and TNF-α, decreased after inhibition of autophagy in titanium particle-stimulated macrophages, which may be caused by immune dysfunction due to titanium particle-induced autophagy and apoptosis in macrophages. Furthermore, our in vivo mouse calvarial model also showed that autophagy inhibitors lowered the rate of cell apoptosis. Our findings indicate that wear particle-induced apoptosis may be caused by enhanced autophagy in macrophages, which could potentially impair the local innate immunity in periprosthetic tissues and could be a risk factor for PJI. Based on these results, autophagy modulators may act as a new therapeutic option for PJI.

Progranulin Decreases Susceptibility to Streptococcus pneumoniae in Influenza and Protects against Lethal Coinfection

Streptococcus pneumoniae coinfection is a major cause of mortality in influenza pandemics. Growing evidence shows that uncontrolled immune response results in severe tissue damage and thereby promotes death in coinfection. Progranulin (PGRN) is widely expressed in immune and epithelial cells and exerts anti-inflammatory role in many diseases. We found that PGRN levels were significantly elevated in clinical influenza/S. pneumoniae-coinfected patients. C57BL/6 wild-type (WT) and PGRN-deficient (PGRN^-/-) mice were infected with influenza virus PR8 and then superchallenged with S. pneumoniae serotype 19F. Coinfected PGRN^-/- mice showed increased mortality and weight loss compared with WT mice. PGRN deficiency led to increased bacterial loads in lungs without altering influenza virus replication, suggesting a role of PGRN in decreasing postinfluenza susceptibility to S. pneumoniae coinfection. Administration of recombinant PGRN improved survival of WT and PGRN^-/- mice in lethal coinfection. Additionally, loss of PGRN resulted in aggravated lung damage along with massive proinflammatory cytokine production and immune cell infiltration during coinfection. Endoplasmic reticulum stress (ERS) during influenza, and coinfection was strongly induced in PGRN^-/- mice that subsequently activated apoptosis signaling pathways. Treatment of recombinant PGRN or inhibition of ERS by 4-phenylbutyrate decreased apoptosis and bacterial loads in lungs of coinfected mice. These results suggest that PGRN decreases postinfluenza susceptibility to S. pneumoniae coinfection via suppressing ERS-mediated apoptosis. Impaired bacterial clearance and increased lung inflammation are associated with the lethal outcome of coinfected PGRN^-/- mice. Our study provides therapeutic implication of PGRN to reduce morbidity and mortality in influenza/S. pneumoniae coinfection.

Nutritional Modulation of Immune and Central Nervous System Homeostasis: The Role of Diet in Development of Neuroinflammation and Neurological Disease

The gut-microbiome-brain axis is now recognized as an essential part in the regulation of systemic metabolism and homeostasis. Accumulating evidence has demonstrated that dietary patterns can influence the development of metabolic alterations and inflammation through the effects of nutrients on a multitude of variables, including microbiome composition, release of microbial products, gastrointestinal signaling molecules, and neurotransmitters. These signaling molecules are, in turn, implicated in the regulation of the immune system, either promoting or inhibiting the production of pro-inflammatory cytokines and the expansion of specific leukocyte subpopulations, such as Th17 and Treg cells, which are relevant in the development of neuroinflammatory and neurodegenerative conditions. Metabolic diseases, like obesity and type 2 diabetes mellitus, are related to inadequate dietary patterns and promote variations in the aforementioned signaling pathways in patients with these conditions, which have been linked to alterations in neurological functions and mental health. Thus, maintenance of adequate dietary patterns should be an essential component of any strategy aiming to prevent neurological pathologies derived from systemic metabolic alterations. The present review summarizes current knowledge on the role of nutrition in the modulation of the immune system and its impact in the development of neuroinflammation and neurological disease.

Effects of vitamin E incorporation in polyethylene on oxidative degradation, wear rates, immune response, and infections in total joint arthroplasty: a review of the current literature

Highly cross-linked ultrahigh molecular weight polyethylene (UHMWPE) was introduced to decrease wear debris and osteolysis. During cross-linking, free radicals are formed, making highly cross-linked polyethylene vulnerable to oxidative degradation. In order to reduce this process, anti-oxidant vitamin E can be incorporated in polyethylene. This review provides an overview of the effects of vitamin E incorporation on major complications in total joint arthroplasty: material failure due to oxidative degradation, wear debris and subsequent periprosthetic osteolysis, and prosthetic joint infections. Secondly, this review summarizes the first clinical results of total hip and knee arthroplasties with vitamin E incorporated highly cross-linked polyethylene. Based on in vitro studies, incorporation of vitamin E in polyethylene provides good oxidative protection and preserves low wear rates. Incorporation of vitamin E may have the beneficial effect of reduced inflammatory response to its wear particles. Some microorganisms showed reduced adherence to vitamin E-incorporated UHMWPE; however, clinical relevance is doubtful. Short-term clinical studies of total hip and knee arthroplasties with vitamin E-incorporated highly cross-linked UHMWPE reported good clinical results and wear rates similar to highly cross-linked UHMWPE without vitamin E.

Vitamin E Phosphate Coating Stimulates Bone Deposition in Implant-related Infections in a Rat Model

BACKGROUND

Implant-related infections are associated with impaired bone healing and osseointegration. In vitro antiadhesive and antibacterial properties and in vivo antiinflammatory effects protecting against bone loss of various formulations of vitamin E have been demonstrated in animal models. However, to the best of our knowledge, no in vivo studies have demonstrated the synergistic activity of vitamin E in preventing bacterial adhesion to orthopaedic implants, thus supporting the bone-implant integration.

QUESTIONS/PURPOSES

The purpose of this study was to test whether a vitamin E phosphate coating on titanium implants may be able to reduce (1) the bacterial colonization of prosthetic implants and (2) bone resorption and osteomyelitis in a rat model of Staphylococcus aureus-induced implant-related infection.

METHODS

Twelve rats were bilaterally injected in the femurs with S aureus UAMS-1-Xen40 and implanted with uncoated or vitamin E phosphate-coated titanium Kirschner wires without local or systemic antibiotic prophylaxis. Eight rats represented the uninfected control group. A few hours after surgery, two control and three infected animals died as a result of unexpected complications. With the remaining rats, we assessed the presence of bacterial contamination with qualitative bioluminescence imaging and Gram-positive staining and with quantitative bacterial count. Bone changes in terms of resorption and osteomyelitis were quantitatively analyzed through micro-CT (bone mineral density) and semiquantitatively through histologic scoring systems.

RESULTS

Six weeks after implantation, we found only a mild decrease in bacterial count in coated versus uncoated implants (Ti versus controls: mean difference [MD], -3.705; 95% confidence interval [CI], -4.416 to -2.994; p < 0.001; TiVE versus controls: MD, -3.063; 95% CI, -3.672 to -2.454; p < 0.001), whereas micro-CT analysis showed a higher bone mineral density at the knee and femoral metaphysis in the vitamin E-treated group compared with uncoated implants (knee joint: MD, -11.88; 95% CI, -16.100 to -7.664; p < 0.001 and femoral metaphysis: MD, -19.87; 95% CI, -28.82 to -10.93; p < 0.001). We found decreased osteonecrosis (difference between medians, 1.5; 95% CI, 1-2; p < 0.002) in the infected group receiving the vitamin E-coated nails compared with the uncoated nails.

CONCLUSIONS

These preliminary findings indicate that vitamin E phosphate implant coatings can exert a protective effect on bone deposition in a highly contaminated animal model of implant-related infection.

CLINICAL RELEVANCE

The use of vitamin E coatings may open new perspectives for developing coatings that can limit septic loosening of infected implants with bacterial contamination. However, a deeper insight into the mechanism of action and the local release of vitamin E as a coating for orthopaedic implants is required to be used in clinics in the near future. Although this study cannot support the antimicrobial properties of vitamin E, promising results were obtained for bone-implant osseointegration. These preliminary results will require further in vivo investigations to optimize the host response in the presence of antibiotic prophylaxis.

A phospholipid polymer graft layer affords high resistance for wear and oxidation under load bearing conditions

Manipulating the surface and substrate of cross-linked polyethylene (CLPE) is an essential approach for obtaining life-long orthopedic bearings. We therefore proposed a bearing material comprised of an antioxidative substrate generated by vitamin E blending (HD-CLPE[VE]) with a poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)-grafted surface, and investigated its wear resistance and oxidative stability under accelerated aging and load bearing conditions. Neither the hydration nor friction kinetics of the molecular network structure of the PMPC-grafted surface or the HD-CLPE(VE) substrate were influenced by accelerated aging but rather exhibited high stability even under high oxidation conditions. The characteristics of the PMPC-grafted surface improved the wear and impact fatigue resistance of the HD-CLPE(VE) liner regardless of accelerated aging. Notably, the PMPC-grafted surface was found to affect the potential oxidative stability at the rim part of the acetabular liner. PMPC chains serve several important functions on the surface regardless of load bearing, such as high lubricity or low lipophilicity attributed to phosphorylcholine groups and/or surrounding water-fluid film, and suppression of lipid diffusion attributed to methacrylate main chains on the surface. Together, these results provide preliminary evidence that the PMPC graft layer and vitamin E-blended substrate might positively affect the extent of orthopedic implant durability.